2016 conference - vibration institute annual conference indiv reg... · resonance will cause...
TRANSCRIPT
2016
Annual Training
Conference
June 14-17, 2016
Renaissance Asheville Hotel
Asheville, North Carolina
T he Vibration Institute will hold the 2016 Annual
Training Conference in Asheville, North
Carolina, at the Renaissance Asheville Hotel.
The location of the Renaissance Hotel puts
guests in walking distance of many restaurants and
historic sights. The Wall Street Journal recently published
a major travel story on Asheville as a vibrant location
calling it “an insider’s escape”.
The 2016 Annual Training Conference will provide
training and education on practical vibration technology
and networking opportunities for attendees. It is the place
for the vibration and condition monitoring community to
meet every year. Our sessions emphasize the use of
basic and advanced techniques to achieve an outstanding
predictive maintenance program. Identification, analysis,
and correction techniques used in vibration analysis and
condition monitoring, including alternative technologies
such as oil analysis and ultrasound are topics to be
presented.
The Conference will begin with a general interest opening
session to orient attendees to the latest ideas in
technology and practices in the vibration analysis and
condition monitoring field. Major Sessions on vibration
isolation and damping in structures and machines, gas
turbine analysis, analysis and condition monitoring of
reciprocating machines, and finite element analysis are
planned. Sessions on time waveform analysis and signal
processing will be provided for analysts to sharpen their
skills. Attendees are invited to a “bring your problem”
session to bring a difficult or unsolvable problem for
discussion. Case history and best practice maintenance
sessions will round out the program.
For the most up-to-date information, visit
www.vi-institute.org/conference
2016 Exhibit Hall
The Annual Training Conference will include an exhibit
hall where vendors will have equipment on-hand for
conducting condition-based monitoring using vibration
analysis, thermography, oil analysis, and ultrasound. The
exhibits provide attendees an overview of the technology
available for the effective operation of a predictive
maintenance program within their organization.
Concurrent Sessions
In an effort to better serve our conference attendees and
meet their educational and training needs, the 2016
Training Conference agenda will feature concurrent
session tracks and an expanded program that will
emphasize related technologies. Attendees will have the
opportunity to “customize” their conference experience
based on their individual educational needs. In addition,
the Institute will again host an Academic Track at the
2016 Conference. Students and faculty from around the
world have submitted papers for review, spanning topics
from structural dynamics to noise cancellation. Paper
titles and authors will be listed on the Vibration Institute
website as soon as the review process is completed. Join
us in welcoming and encouraging our future colleagues!
Featured
PRE-CONFERENCE
Workshop 1: Resonance in Mechanical, Electrical, and Acoustical Systems Instructors: Nelson L. Baxter, ABM Technical Services, and Ray D. Kelm. P.E., Kelm Engineering Tuesday, June 14, 2016 8 am—5 pm
Resonance will cause excessive vibration leading to possible loss of product quality and machine failure. The concepts of resonance in mechanical, electrical, and acoustical systems are reviewed. Parameters that affect natural frequencies and forces that excite resonance will be explored. Analogies among physical parameters that control natural frequencies will be presented. Applications and case histories will be used to apply and illustrate the concepts.
1-DAY WORKSHOPS
Workshop 2: Balancing of Rotating Machinery Instructors: Kevin Guy, Delaware Analysis Services, Inc. Tuesday, June 14, 2016 8 am—5 pm
Balancing is the solution to vibration problems caused by mass unbalance but it cannot be used to solve problems like misalignment and resonance. This one-day training course is intended to relate basic balancing concepts including techniques, limits, and applications as well as show methods to discern whether or not vibration can be eliminated through balancing. Balancing strategy should seek to correct critical machine vibration problems with a minimum number of moves and lost production time. Case histories and examples will be employed to illustrate these techniques and strategies. This course is designed to refresh and enhance the abilities of the experienced technician and to introduce an awareness of the methods to managers who wish to monitor balancing activities.
2016
Vibration Institute
ANNUAL TRAINING CONFERENCE
June 14, 2016
Training Course
4-Day
The Vibration Institute’s Introduction to Machinery Vibrations
(IMV) course will take place Tuesday through Friday (June
14-17) at the 2016 Annual Training Conference. Registrants
for the IMV course are encouraged to attend the Conference
lunches, Exhibit Hall, and social networking hours. The IMV
course prepares attendees to perform a range of simple,
single channel machinery vibration condition monitoring and
diagnostic activities, is recommended for individuals as an
introduction to machinery vibrations and is partial
preparation for the Vibration Analyst Category I Certification
Exam. The workshops and demonstrations, scheduled
throughout the training course, are used to illustrate theory
and applications.
The IMV training course will begin at 8 a.m. and
conclude at 5:00 p.m. daily, Tuesday through Friday.
Participants receive a copy of the course notes and
PowerPoints, workbook containing examples and workshop
problems to be completed, the Body of Knowledge found in
ISO 18436-2 Annex A, training course examination study
guide, calculator, ruler, and certificate of completion. The
IMV course contains, at minimum, the required material and
is considered partial preparation for the Category I
examination for Vibration Analysts which will be given on
Saturday, June 18 (separate registration required).
INTRODUCTION TO MACHINERY
VIBRATIONS (IMV)
Instructors: Jack Peters, Connection Technology Center,
Inc.; and David Szrom, Mechanical Consultants, Inc.
Tuesday, June 14—Friday, June 17, 2016 8 am—5 pm daily
Certification
Examinations
June 18, 2016
Certification Examinations for Vibration
Analysts in all categories are scheduled for Saturday,
June 18. Examinations for Balancing of Rotating
Machinery will also be given on Saturday.
Qualifications for examinations for Vibration Analysts
at the four different levels are summarized below.
Saturday, June 18, 2016 8 am—1 pm
Category I: Capable of performing simple machinery
vibration measurements involving single-channel
condition monitoring and diagnosis.
Category II: Basic knowledge of machinery vibration,
capable of routing data collection and periodic
monitoring, and ability to perform basic fault diagnosis
and condition evaluation.
Category III: Certification in Category II; capable of
carrying out fault diagnosis, condition evaluation, and
acceptance testing; ability to set up periodic monitoring
programs and perform minor correction actions.
Category IV: Certification in Category III; capable of
solving chronic mechanical problems, conducting
advanced fault and condition analysis, and performing
vibration control procedures.
2016
Vibration Institute
ANNUAL TRAINING CONFERENCE
2016 Annual Training Conference
AGENDA
Draft agenda, subject to change.
Tuesday, June 14, 2016
FOUR-DAY TRAINING COURSE & PRE-CONFERENCE WORKSHOPS
8 am—5 pm Introduction to
Machinery Vibration
David Szrom and Jack Peters
8 am—5 pm
Resonance Solutions in
Mechanical Fluid, and
Electrical Systems
Nelson Baxter, P.E.,
ABM Technical Services,
and Ray Kelm, P.E., Kelm
Engineering
8 am—5 pm Balancing of Rotating
Machines
Kevin Guy, Delaware
Analysis Services, Inc.
4 pm EXHIBIT HALL OPENS
6—7:30 PM NETWORKING RECEPTION IN THE EXHIBIT HALL
Wednesday, June 15, 2016
ANNUAL TRAINING CONFERENCE
8 am—5 pm Introduction to
Machinery Vibration
David Szrom and Jack Peters
8—9 am OPENING GENERAL SESSION
Opening Remarks Dave Corelli, VI President
Headquarters Report
Robin Ginner, VI
Executive Director
Jack Frarey Memorial
Award Dr. Ronald Eshleman
9—10 am
Keynote: How Operating
Deflection Shapes Can
Help You Diagnose
Mark Richardson,
Vibrant Technology
10:30 am—
12:30 pm
Invited Paper: A New
Paradigm for PdM
Condition Monitoring
Instrumentation
Ken Piety, Azima DLI
2016 Annual Training Conference
Wednesday, June 15, 2016 (continued)
ANNUAL TRAINING CONFERENCE
1:30—3 pm CONCURRENT SESSIONS
Power Track: Gas
Turbine Analysis
Tim Irwin, Mitsubishi Hitachi Power Systems Americas, Inc.
Vibration Analysis Track:
What Vibration Analysts
Should Know about
Signal Processing
Rene Archambault,
International
Measurement Solutions
Structural Dynamics &
Isolation Track:
Structural Dynamics of
Machines on Resilient
Mounts
Robert Sayer, P.E.,
Applied Structural
Dynamics
3:30—5:30 pm CONCURRENT SESSIONS
Power Track: Analysis
and Balancing of a W
501 Gas Turbine
Dr. Edgar J. Gunter,
University of Virginia
Vibration Analysis Track:
Time Waveform
Analysis on Rotating
Machinery
Jim Berry, Technical
Associates of Charlotte
Structural Dynamics &
Isolation Track: Isolation
Case Histories
Barry Cease, Cease
Industrial Consulting,
and Dr. Ronald
Eshleman
6—7:30 pm NETWORKING RECEPTION & ACADEMIC POSTER
EXHIBIT IN THE EXHIBIT HALL
Draft agenda, subject to change.
Thursday, June 16, 2016
ANNUAL TRAINING CONFERENCE
8 am—5 pm Introduction to Machinery
Vibration
David Szrom and Jack Peters
8—10 am CONCURRENT SESSIONS
Power Track: Cooling Tower
Case Histories
Barry Cease, Cease
Industrial Consulting
Academic Track: TBD TBD
Isolation Track: Isolation
Demonstrations—
Measurement and Analysis of
Isolators
Nelson Baxter, P.E.,
ABM Technical Services,
and Barry Cease, Cease
Industrial Consulting
10:30 am—
12:30 pm CONCURRENT SESSIONS
Novel Evaluation of Resonance
Risk Margin (RRM) Using
Impact Testing of Compressor
Blades
Dr. Nabil Rashwan, and
Majed Saimaldaher,
Saudi Electricity Co.
Cavitation and Fouling Induced
Vibrations in Large Steam
Turbines
S. Murugan, Dubai
Petroleum
Academic Track: TBD TBD
Isolation Track: Isolator
Effectiveness
Nelson Baxter, P.E.,
ABM Technical Services,
and Barry Cease, Cease
Industrial Consulting
1:30—3 pm CONCURRENT SESSIONS
Reciprocating Machines Track:
Analysis of Reciprocating
Machines
Troy Feese, Engineering
Dynamics Inc.
Academic Track: Kaybob
Revisited: What We Have
Learned About Compressor
Stabilization From Self Excited
Whirling
Brian Weaver, and Dr.
Edgar Gunter, University
of Virginia
Alternative Technologies Track:
Best Practices for Ultrasound
Adrian Messer, UE
Systems, Inc.
Thursday, June 16, 2016 (continued)
ANNUAL TRAINING CONFERENCE
3:30—5:30 pm CONCURRENT SESSIONS
Condition Monitoring of
Reciprocating Machines
Mary Chapman,
Windrock Inc.
Case Histories:
Identifying the Root
Cause of a Bearing Fault
Rather than the
Symptoms
John Sykes, AVT
Reliability
Troubleshooting High
Vibration Issues for
Newly Commissioned
Motor Pump System in a
Petrochemical Complex
Rishikesh Kumar, SADAR
Chemical Co.
Machine Condition
Evaluation by Oil
Analysis
Barry Cato, Analysts, Inc.
Friday, June 17, 2016
ANNUAL TRAINING CONFERENCE
8 am—5 pm Introduction to
Machinery Vibration
David Szrom and Jack Peters
8—10 am CONCURRENT SESSIONS
Rotor Balancing:
Rotordynamics of Phase
Lag—Analogy to Child’s
Play
Michael Schunk, Praxair
Finite Element Modeling:
An Overview of Finite
Element Applications to
Vibrations
Robert Sayer, P.E.,
Applied Structural
Dynamics
Process Machine
Characteristics:
Assessing Impeller
Damage
Gene Vogel, EASA Pump
and Vibration Specialist
Draft agenda, subject to change.
For the most up-to-date information, visit
www.vi-institute.org/conference
Friday, June 17, 2016
ANNUAL TRAINING CONFERENCE
10:30 am—
12:30 pm CONCURRENT SESSIONS
Difficult Balancing
Problems
Nelson Baxter, P.E.,
ABM Technical Services
Study of the Dynamic
Behavior of a Planetary
Gearbox by Vibration
Analysis, Operating
Deflection Shape and
Finite Element Method
Edmilson Santos, SKF
Brazil
Machinery Vibrated to
Poor Bolting Practices
Ken Singleton, KSC
Consulting LLC, and Bob
McGinnis, P.E., McGinnis
Engineering LLC
1:30—3 pm Panel Session: Bring Your
Problem David Corelli, Moderator
3 pm CONFERENCE ADJOURNS
Saturday, June 18, 2016
CERTIFICATION EXAMS
8 am—1 pm Certification Examinations
(advanced exam registration required)
Vibration Analyst—Category I
Vibration Analyst—Category II
Vibration Analyst—Category III
Vibration Analyst—Category IV
Balancing of Rotating Machinery—Category I
Draft agenda, subject to change.
2016
Vibration Institute
ANNUAL TRAINING CONFERENCE
The Vibration Institute awards continuing education
units (CEUs) for the 2016 Vibration Institute Annual Training Conference as follows:
0.8 points – Pre-Conference Workshop 1: Resonance in Mechanical, Electrical, and Acoustical Systems — June 14, 2016 0.8 points – Pre-Conference Workshop 2: Balancing of Rotating Machinery — June 14, 2016 1.0 point – Vibration Institute Annual Training Conference – Single Day Registration 3.0 points – Vibration Institute Annual Training Conference – June 15-17, 2016 3.2 points – Introduction to Machinery Vibrations Course – June 14-17, 2016
If registered for the conference and/or courses prior to June 1, 2016, a CEU certificate will be included in your conference packet, distributed on-site at conference registration.
CONTINUING
EDUCATION UNITS
REGISTRATION
EARLY BIRD
REGISTRATION
THRU
MAY 20, 2016
REGISTRATION
AFTER
MAY 20, 2016
One-day Pre-Conference Workshops – June 14, 2016
Workshop 1: Resonance $275 $350
Workshop 2: Balancing $275 $350
Four-Day Training Course – June 14-17, 2016
Introduction to Machinery Vibrations
(IMV) Course $1,525 $1,675
Annual Training Conference – June 15-17, 2016
Conference Registration – Full $995 $1,095
Conference Registration – Speakers
and Chapter Officers $550 $600
Conference Registration – Academics/
Students $350 $350
Conference Registration – One Day $350 $415
Conference Registration – Two Day $700 $775
Certification Examinations – June 18, 2016
Category I $275 $275
Category II $300 $300
Category III $350 $350
Category IV $450 $450
Balancing of Rotation Machinery – Category I
$275 $275
TOTAL REGISTRATION FEES:
2016
Conference
Registration
2016 Annual Conference Proceedings (please check ONE only):
_____ Electronic 2016 Annual Conference Proceedings - Free with registration
_____ Printed 2016 Annual Conference Proceedings -
Additional $75 fee will be added to your registration
Method of Payment (All fees payable in US Currency only) TOTAL: _________
Credit Card #: ______________________________________________________
Expiration Date: ___________ Name on Card: ____________________________
Signature: _________________________________________________________
Provide billing information, regardless of method of payment:
Company (if applicable): ______________________ Name:___________________
Billing Address: _____________________________________________________
Billing City/State/Zip: _________________________________________________
Billing Country: _____________________________________________________
Email address for Payment Receipt/Invoice: ________________________________
Name: ______________________________________________________
Title/Position: ________________________________________________
Company: ___________________________________________________
Address: ____________________________________________________
City/State/Zip:________________________________________________
Phone: _______________________ Fax: _________________________
Email: ______________________________________________________
VI Member*? □ Yes □ No (If yes, VI membership number: __________)
(*Current VI Members are entitled to a 10% discount off registration pricing.)
Please provide the Institute with any dietary restrictions or other
accommodations you may need in advance of the conference:
____________________________________________________________________
____________________________________________________________________
REGISTER ONLINE AT WWW.VI-INSTITUTE.ORG/CONFERENCE
Or mail or Fax this form to the Institute at:
Vibration Institute
2625 Butterfield Road, Suite 128N
Oak Brook, IL 60523
Phone: 1-630-654-2254
Fax: 1-630-654-2271
Email: [email protected]
□ Check Enclosed □ Purchase Order # __________________
□ Credit Card: □ AMEX □ Discover □ MasterCard □ Visa
Payment must be received prior to arriving at your chosen event(s). The Vibration Institute does not accept Purchase Orders as confirmation
of payment. Please be advised that if you arrive at the 2016 Training Conference, IMV course, or certification examination without prior
registration, payment must be made in full on-site.
HOTEL AND
REGISTRATION
INFORMATION
RENAISSANCE ASHEVILLE HOTEL
31 Woodfin Street
Asheville, NC 28801
Phone: 1-828-252-8211
Reservations: 1-800-468-3571
www.renaissanceasheville.com
2016
Vibration Institute
ANNUAL TRAINING CONFERENCE
RENAISSANCE ASHEVILLE HOTEL
31 Woodfin Street
Asheville, NC 28801
Phone: 1-828-252-8211
Reservations: 1-800-468-3571
www.renaissanceasheville.com
Hotel and Registration Information
RENAISSANCE ASHEVILLE HOTEL
31 Woodfin Street
Asheville, NC 28801
Phone: 1-828-252-8211
Reservations: 1-800-468-3571
$133 single/double occupancy
The Vibration Institute has reserved rooms at the Renaissance Asheville Hotel for $133 per night. The room rate will be available until May 20, 2016. Attendees are responsible for making their own room reservations. Please secure your reservation early by calling the hotel direct at 1-800-468-3571 and reference the Vibration Institute block.
AIRPORT & ALTERNATIVE TRANSPORTATION Asheville Regional Airport (AVL) www.flyavl.com The Asheville Regional Airport, located approximately 16 miles from the hotel, is served by Allegiant, Delta, United, US Airways and American Airlines. The Greyhound bus station is located 2 miles from the hotel at 2 Tunnel Rd, Asheville, NC 28805. Amtrak can be found in Greenville, SC; and Spartanburg, SC. Both are approximately an hour away from Asheville. Visit www.amtrak.com for more information.
TRANSPORTATION BETWEEN THE AIRPORT AND HOTEL This hotel does not provide shuttle service. Alternate transportation: Ground Transportation 1-828-681-0051 $40 USD (one way), reservation required Taxis are available at the airport. One-way fares are $40 USD.
PARKING Complimentary on-site parking is available at the Renaissance Asheville Hotel.
REGISTRATION Registration prior to the Conference is strongly recommended and all attendees will receive a confirmation letter from the Institute. Your conference registration fee covers the cost of attendance at all sessions on June 15-17, 2016; an electronic copy of the 2016 Conference Proceedings; all continental breakfasts, breaks, luncheons, and networking receptions. Additional fees apply for the pre-conference workshops, and the four-day IMV course – both beginning on Tuesday, June 14 — please see the registration form for details. Additional registration fees are required for certification examinations offered on Saturday, June 18. If you are scheduled to present a paper for the conference, please return the registration as all speakers must register for the Conference at the discounted rate.
CANCELLATION All registration fees are U.S. currency and payable to the Vibration Institute. Cancellation of registration will be honored less a $75 administrative fee, provided written notification is received by the Institute office via mail or e-mail no later than ten (10) days prior to the first day of the Conference. A $200 fee will be charged for cancellations received after that date.
2016
Vibration Institute
ANNUAL TRAINING CONFERENCE