Open the hood and remove the factory push fasteners securing the radiator support panel cover and remove the cover.

TOOLS REQUIRED

Use a flat blade screwdriver to remove the factory push pin / rubber bumper securing the top of the factory bumper cover to the radiator support panel.

3

2

Use a flat blade screwdriver to rotate the inner wheel well mounting fasteners 90 degrees (1/4 turn) to unclip and remove them (one each side).

Please contact the authorized E&G Classics Dealer where you purchased our product from in regards to any workmanship or warranty claims. All items returned to E&GClassics must have a return authorization number issued by us for inspection or a defective product and or warranty issue. All merchandise sent back to E&G Classicswithout proper paperwork or authorization will be rejected and returned.