2011 vw jetta tdi cm6000 install - compustar...important! this wiring information is provided free...
TRANSCRIPT
-
Important! This wiring information is provided free of charge on an “as is” basis, without any representation or warranty. It is the dealer’s
responsibility to verify any circuit before interfacing with it using a digital multi-meter. Firstech, LLC. assumes no responsibility with
regards to the accuracy or currency of this information. Proper installation in every case remains the responsibility of the installer.
Firstech, LLC. assumes no liability no responsibility resulting from an improper installation.
Pag
e1
2011 VW JETTA TDI CM6000 INSTALL
CanBus wires are orange/lt. green and orange/brown. They one picked up door triggers and trunk pin with firmware VW1.
-
Important! This wiring information is provided free of charge on an “as is” basis, without any representation or warranty. It is the dealer’s
responsibility to verify any circuit before interfacing with it using a digital multi-meter. Firstech, LLC. assumes no responsibility with
regards to the accuracy or currency of this information. Proper installation in every case remains the responsibility of the installer.
Firstech, LLC. assumes no liability no responsibility resulting from an improper installation.
Pag
e2
2011 VW JETTA TDI CM6000 INSTALL
PTS Switch in the center console. To start the car you must put your foot on the brake and push the start button for five seconds.
-
Important! This wiring information is provided free of charge on an “as is” basis, without any representation or warranty. It is the dealer’s
responsibility to verify any circuit before interfacing with it using a digital multi-meter. Firstech, LLC. assumes no responsibility with
regards to the accuracy or currency of this information. Proper installation in every case remains the responsibility of the installer.
Firstech, LLC. assumes no liability no responsibility resulting from an improper installation.
Pag
e3
2011 VW JETTA TDI CM6000 INSTALL
Remove the plug cover
-
Important! This wiring information is provided free of charge on an “as is” basis, without any representation or warranty. It is the dealer’s
responsibility to verify any circuit before interfacing with it using a digital multi-meter. Firstech, LLC. assumes no responsibility with
regards to the accuracy or currency of this information. Proper installation in every case remains the responsibility of the installer.
Firstech, LLC. assumes no liability no responsibility resulting from an improper installation.
Pag
e4
2011 VW JETTA TDI CM6000 INSTALL
PTS wires Pin 1 Brown, Ground Pin 2 Purple/white, Dimmer Pin 3 Purple/yellow (-) start and stop 11.5mA draw on ign or start Pin 4 Purple/black (-) start and stop 10.2mA draw on ign or Start Pin 5, 6 open
-
Important! This wiring information is provided free of charge on an “as is” basis, without any representation or warranty. It is the dealer’s
responsibility to verify any circuit before interfacing with it using a digital multi-meter. Firstech, LLC. assumes no responsibility with
regards to the accuracy or currency of this information. Proper installation in every case remains the responsibility of the installer.
Firstech, LLC. assumes no liability no responsibility resulting from an improper installation.
Pag
e5
2011 VW JETTA TDI CM6000 INSTALL
Transponder ring mounted to the steering column
-
Important! This wiring information is provided free of charge on an “as is” basis, without any representation or warranty. It is the dealer’s
responsibility to verify any circuit before interfacing with it using a digital multi-meter. Firstech, LLC. assumes no responsibility with
regards to the accuracy or currency of this information. Proper installation in every case remains the responsibility of the installer.
Firstech, LLC. assumes no liability no responsibility resulting from an improper installation.
Pag
e6
2011 VW JETTA TDI CM6000 INSTALL
2 pin transponder ring
-
Important! This wiring information is provided free of charge on an “as is” basis, without any representation or warranty. It is the dealer’s
responsibility to verify any circuit before interfacing with it using a digital multi-meter. Firstech, LLC. assumes no responsibility with
regards to the accuracy or currency of this information. Proper installation in every case remains the responsibility of the installer.
Firstech, LLC. assumes no liability no responsibility resulting from an improper installation.
Pag
e7
2011 VW JETTA TDI CM6000 INSTALL
Brake wire White/green (-)
-
Important! This wiring information is provided free of charge on an “as is” basis, without any representation or warranty. It is the dealer’s
responsibility to verify any circuit before interfacing with it using a digital multi-meter. Firstech, LLC. assumes no responsibility with
regards to the accuracy or currency of this information. Proper installation in every case remains the responsibility of the installer.
Firstech, LLC. assumes no liability no responsibility resulting from an improper installation.
Pag
e8
2011 VW JETTA TDI CM6000 INSTALL
Brake wire location, master cylinder
-
Important! This wiring information is provided free of charge on an “as is” basis, without any representation or warranty. It is the dealer’s
responsibility to verify any circuit before interfacing with it using a digital multi-meter. Firstech, LLC. assumes no responsibility with
regards to the accuracy or currency of this information. Proper installation in every case remains the responsibility of the installer.
Firstech, LLC. assumes no liability no responsibility resulting from an improper installation.
Pag
e9
2011 VW JETTA TDI CM6000 INSTALL
Parking lights are at the headlight switch. Parking light wire is gray/red (+)