2. principles of designing rpd with special emphsis on support and perio
TRANSCRIPT
![Page 1: 2. principles of designing rpd with special emphsis on support and perio](https://reader036.vdocuments.us/reader036/viewer/2022062319/554b3f9cb4c905b5378b4a68/html5/thumbnails/1.jpg)
GOOD MORNING
![Page 2: 2. principles of designing rpd with special emphsis on support and perio](https://reader036.vdocuments.us/reader036/viewer/2022062319/554b3f9cb4c905b5378b4a68/html5/thumbnails/2.jpg)
Principles of Removable Partial Dentures with special emphasis on
support and periodontal consideration of remaining teeth
By Dr ZARIR RUTTONJI
![Page 3: 2. principles of designing rpd with special emphsis on support and perio](https://reader036.vdocuments.us/reader036/viewer/2022062319/554b3f9cb4c905b5378b4a68/html5/thumbnails/3.jpg)
CONTENTS
1) Introduction 2) Principles of desining 3) Stress considerations4) Forces influencing the magnitude of stress5) Biomechanical consideration of individual
component
6) Philosophies of designs
7) Essentials of designing
8) Procedure of designing
9) Conclusion
10)References
![Page 4: 2. principles of designing rpd with special emphsis on support and perio](https://reader036.vdocuments.us/reader036/viewer/2022062319/554b3f9cb4c905b5378b4a68/html5/thumbnails/4.jpg)
• INTRODUCTION
![Page 5: 2. principles of designing rpd with special emphsis on support and perio](https://reader036.vdocuments.us/reader036/viewer/2022062319/554b3f9cb4c905b5378b4a68/html5/thumbnails/5.jpg)
![Page 6: 2. principles of designing rpd with special emphsis on support and perio](https://reader036.vdocuments.us/reader036/viewer/2022062319/554b3f9cb4c905b5378b4a68/html5/thumbnails/6.jpg)
INDICATION FOR REMOVABLE PARTIAL DENTURES
Stewart’s Clinical removable partial Prosthodontics 4th edition pg-8
1.Long standing edentulous area
2.No abutment tooth posterior to the edentulous space
3.Reduced periodontal support for remaining teeth
4.Need for cross ach stablization
![Page 7: 2. principles of designing rpd with special emphsis on support and perio](https://reader036.vdocuments.us/reader036/viewer/2022062319/554b3f9cb4c905b5378b4a68/html5/thumbnails/7.jpg)
INDICATION FOR REMOVABLE PARTIAL DENTURES continued
Stewart’s Clinical removable partail prosthodontics 4th edition pg-8
5.Excessive bone loss within the residual ridge
6.Physical or emotional problem exhibited by the patient
![Page 8: 2. principles of designing rpd with special emphsis on support and perio](https://reader036.vdocuments.us/reader036/viewer/2022062319/554b3f9cb4c905b5378b4a68/html5/thumbnails/8.jpg)
INDICATION FOR REMOVABLE PARTIAL DENTURES continued
8) Immediate need to replace extracted teeth
9) Patient desire
10)Unfavourable maxillomandibular relation.
Stewart’s Clinical removable partail prosthodontics 4th edition pg-8
![Page 9: 2. principles of designing rpd with special emphsis on support and perio](https://reader036.vdocuments.us/reader036/viewer/2022062319/554b3f9cb4c905b5378b4a68/html5/thumbnails/9.jpg)
PRINCIPLES OF DESIGN
• 1953,Dr.A.H.Schmidt gave the basic principles of designing
1.Dentist should have thorough knowledge
2.Treatment plan must be based on complete examination and diagnosis of individual patient.
![Page 10: 2. principles of designing rpd with special emphsis on support and perio](https://reader036.vdocuments.us/reader036/viewer/2022062319/554b3f9cb4c905b5378b4a68/html5/thumbnails/10.jpg)
3.Dentist must correlate the pertinent factors and determine a proper treatment plan
4.RPD should restore the function without injury to remaining oral strutures
5.It is a form of treatment and not a cure.
![Page 11: 2. principles of designing rpd with special emphsis on support and perio](https://reader036.vdocuments.us/reader036/viewer/2022062319/554b3f9cb4c905b5378b4a68/html5/thumbnails/11.jpg)
STRESS CONSIDERATION IN A PARTIAL DENTURE
The stresses can be divided as:
Vertical
Horizontal
Torsional
Displacing stresses
Dislodging stresses
![Page 12: 2. principles of designing rpd with special emphsis on support and perio](https://reader036.vdocuments.us/reader036/viewer/2022062319/554b3f9cb4c905b5378b4a68/html5/thumbnails/12.jpg)
VERTICAL STRESS
Displacing stresses :
These are the least harmful and are borne well if within physiologic limits
![Page 13: 2. principles of designing rpd with special emphsis on support and perio](https://reader036.vdocuments.us/reader036/viewer/2022062319/554b3f9cb4c905b5378b4a68/html5/thumbnails/13.jpg)
DISLODGING STRESSES :
These are the forces which tend to lift the partial denture from it’s rest position
![Page 14: 2. principles of designing rpd with special emphsis on support and perio](https://reader036.vdocuments.us/reader036/viewer/2022062319/554b3f9cb4c905b5378b4a68/html5/thumbnails/14.jpg)
HORIZONTAL STRESS
They originate as a component of rhythmic chewing stroke. These forces are effective in mesio-distal and buccolingual direction.
These lateral stresses are most damaging.
![Page 15: 2. principles of designing rpd with special emphsis on support and perio](https://reader036.vdocuments.us/reader036/viewer/2022062319/554b3f9cb4c905b5378b4a68/html5/thumbnails/15.jpg)
TORSIONAL STRESS
It is a twisting rotational type of force. It’s a combination of vertical and horizontal force
![Page 16: 2. principles of designing rpd with special emphsis on support and perio](https://reader036.vdocuments.us/reader036/viewer/2022062319/554b3f9cb4c905b5378b4a68/html5/thumbnails/16.jpg)
FORCES ACTING ON PARTIAL DENTURE
![Page 17: 2. principles of designing rpd with special emphsis on support and perio](https://reader036.vdocuments.us/reader036/viewer/2022062319/554b3f9cb4c905b5378b4a68/html5/thumbnails/17.jpg)
McCracken’s Removable Partial Prosthodontics 11 th edition
Is a rigid bar supported somewhere along its length..
The point where the bar is supported is called the fulcrum
Three classes of levers (based on location of fulcrum, resistance and direction of effort (force).
Class IClass IIClass III
LEVER
![Page 18: 2. principles of designing rpd with special emphsis on support and perio](https://reader036.vdocuments.us/reader036/viewer/2022062319/554b3f9cb4c905b5378b4a68/html5/thumbnails/18.jpg)
CLASS I LEVER
Fulcrum lies in the centre, Resistance is at one end and force at the other.
McCracken’s Removable Partial Prosthodontics 11 th edition
![Page 19: 2. principles of designing rpd with special emphsis on support and perio](https://reader036.vdocuments.us/reader036/viewer/2022062319/554b3f9cb4c905b5378b4a68/html5/thumbnails/19.jpg)
CLASS II LEVER
Fulcrum is at one end effort at the opposite end and resistance in the centre.
McCracken’s Removable Partial Prosthodontics 11 th edition
![Page 20: 2. principles of designing rpd with special emphsis on support and perio](https://reader036.vdocuments.us/reader036/viewer/2022062319/554b3f9cb4c905b5378b4a68/html5/thumbnails/20.jpg)
CLASS III LEVER
Fulcrum is at one end,
resistance at opposite
end and effort is in the centre.
McCracken’s Removable Partial Prosthodontics 11 th edition
![Page 21: 2. principles of designing rpd with special emphsis on support and perio](https://reader036.vdocuments.us/reader036/viewer/2022062319/554b3f9cb4c905b5378b4a68/html5/thumbnails/21.jpg)
INCLINED PLANE
• Forces against an inclined plane may result in deflection of that which is applying the forces or may result in movement to the inclined plane, neither of these is desirable
.
Stewart’s clinical Removable Posthodontics 4th edition
![Page 22: 2. principles of designing rpd with special emphsis on support and perio](https://reader036.vdocuments.us/reader036/viewer/2022062319/554b3f9cb4c905b5378b4a68/html5/thumbnails/22.jpg)
FULCRUM ON HORIZONTAL PLANE:
• Extends through the rest of principle abutments.
• Rotational movement of the denture in the sagittal plane.
Stewart’s clinical Removable Posthodontics 4th edition
![Page 23: 2. principles of designing rpd with special emphsis on support and perio](https://reader036.vdocuments.us/reader036/viewer/2022062319/554b3f9cb4c905b5378b4a68/html5/thumbnails/23.jpg)
DENTURE BASE MOVES AWAY FROM SUPPORTING TISSUES:
Counteracted by:
Direct retainer and Indirect retainer
McCracken’s Removable Partial Prosthodontics 11 th edition
![Page 24: 2. principles of designing rpd with special emphsis on support and perio](https://reader036.vdocuments.us/reader036/viewer/2022062319/554b3f9cb4c905b5378b4a68/html5/thumbnails/24.jpg)
DENTURE BASE MOVES TOWARDS THE SUPPORTING TISSUES:
Counteracted by:1) Occlusal rest. 2) Tissues of
supporting ridge
McCracken’s Removable Partial Prosthodontics 11 th edition
![Page 25: 2. principles of designing rpd with special emphsis on support and perio](https://reader036.vdocuments.us/reader036/viewer/2022062319/554b3f9cb4c905b5378b4a68/html5/thumbnails/25.jpg)
FULCRUM ON THE SAGITTAL PLANE
Extends through the occlusal rest on the terminal abutment and along the crest of the ridge.
Movement is in the frontal planeStewart’s clinical Removable Posthodontics 4th edition
![Page 26: 2. principles of designing rpd with special emphsis on support and perio](https://reader036.vdocuments.us/reader036/viewer/2022062319/554b3f9cb4c905b5378b4a68/html5/thumbnails/26.jpg)
Counteracted by:
• Rigidity of major and minor connector and their ability to resist torque.
• Close adaptation of the denture base along the lateral slopes and the buccal slopes of the palate and ridge.
• Direct retainer designMcCracken’s Removable Partial Prosthodontics 11 th edition
![Page 27: 2. principles of designing rpd with special emphsis on support and perio](https://reader036.vdocuments.us/reader036/viewer/2022062319/554b3f9cb4c905b5378b4a68/html5/thumbnails/27.jpg)
FULCRUM LOCATED IN MIDLINE JUST LINGUAL TO THE ANTERIOR TEETH
(FULCRUM IS VERTICAL)
Rotational movement of denture in horizontal plane or
flat circular movements of the denture
Stewart’s clinical Removable Posthodontics 4th edition
![Page 28: 2. principles of designing rpd with special emphsis on support and perio](https://reader036.vdocuments.us/reader036/viewer/2022062319/554b3f9cb4c905b5378b4a68/html5/thumbnails/28.jpg)
Counteracted by :
• Stabilizing components (reciprocal arm and minor connector)
• Rigid major connector
• Close adaptation of denture base
McCracken’s Removable Partial Prosthodontics 11 th edition
![Page 29: 2. principles of designing rpd with special emphsis on support and perio](https://reader036.vdocuments.us/reader036/viewer/2022062319/554b3f9cb4c905b5378b4a68/html5/thumbnails/29.jpg)
FACTORS INFLUENCING MAGNITUDE OF STRESSES TRANSMITTED TO
ABUTMENT TEETH
1. Quality of support of ridge Form of residual ridge type of mucosal covering
2. Length of span
3. Clasp factor design length material amount of tooth contact
Stewart’s clinical Removable Posthodontics 4th edition
![Page 30: 2. principles of designing rpd with special emphsis on support and perio](https://reader036.vdocuments.us/reader036/viewer/2022062319/554b3f9cb4c905b5378b4a68/html5/thumbnails/30.jpg)
4. Occlusion
Type of teeth
Harmony of occlusion
5. Areas of the base to which load is applied
Stewart’s clinical Removable Posthodontics 4th edition
![Page 31: 2. principles of designing rpd with special emphsis on support and perio](https://reader036.vdocuments.us/reader036/viewer/2022062319/554b3f9cb4c905b5378b4a68/html5/thumbnails/31.jpg)
1. QUALITY OF SUPPORT OF RIDGE
• Better support by ridge less stress on abutment teeth
• Large well formed ridges absorb greater stress less stress on abutment
• Broad ridges with parallel sides longer flanges on the denture base stabilize the denture against lateral forces.
Stewart’s clinical Removable Posthodontics 4th edition
![Page 32: 2. principles of designing rpd with special emphsis on support and perio](https://reader036.vdocuments.us/reader036/viewer/2022062319/554b3f9cb4c905b5378b4a68/html5/thumbnails/32.jpg)
b. TYPE OF MUCOSA
• Influences magnitude of stresses transmitted to abutment teeth.
• Healthy mucosa capable of bearing greater functional loads than thin atrophic mucosa
• Soft, flabby, displaceable mucosa Contribute little to vertical support of denture allows
excessive movement of denture stress transmitted to abutment teeth
Stewart’s clinical Removable Posthodontics 4th edition
![Page 33: 2. principles of designing rpd with special emphsis on support and perio](https://reader036.vdocuments.us/reader036/viewer/2022062319/554b3f9cb4c905b5378b4a68/html5/thumbnails/33.jpg)
2. LENGTH OF SPAN
• Longer edentulous span
longer denture base
greater force transmitted to
abutment teeth
• Every effort be made to retain a posterior abutment to avoid class I and class II situation.
Stewart’s clinical Removable Posthodontics 4th edition
![Page 34: 2. principles of designing rpd with special emphsis on support and perio](https://reader036.vdocuments.us/reader036/viewer/2022062319/554b3f9cb4c905b5378b4a68/html5/thumbnails/34.jpg)
3. CLASP AS A FACTOR IN STRESS
• More flexible the retentive arm of claspless stress to abutment tooth
• But, flexible clasp arm provides less stability against horizontal forces increase stress on residual ridge.
• Decision should be made whether abutment or ridge requires more protection
Stewart’s clinical Removable Posthodontics 4th edition
![Page 35: 2. principles of designing rpd with special emphsis on support and perio](https://reader036.vdocuments.us/reader036/viewer/2022062319/554b3f9cb4c905b5378b4a68/html5/thumbnails/35.jpg)
In examination phase decide whether ridge or abutment tooth require more protection
If periodontal support good
less flexible clasp like vertical projection clasp
If periodontal support weak
use more flexible clasp like combination clasp
![Page 36: 2. principles of designing rpd with special emphsis on support and perio](https://reader036.vdocuments.us/reader036/viewer/2022062319/554b3f9cb4c905b5378b4a68/html5/thumbnails/36.jpg)
TYPE ABUTMENT TOOTH SURFACE
• Surface if gold crown offers more frictional resistance to clasp arm movement than does enamel surface of tooth.
• Greater stress exerted on tooth restored with crown than with intact enamel.
Stewart’s clinical Removable Posthodontics 4th edition
![Page 37: 2. principles of designing rpd with special emphsis on support and perio](https://reader036.vdocuments.us/reader036/viewer/2022062319/554b3f9cb4c905b5378b4a68/html5/thumbnails/37.jpg)
AMOUNT OF CLASP SURFACE IN CONTACT WITH TOOTH
Greater the area of tooth to metal contact between clasp and tooth
more will be stress exerted on the tooth.
Stewart’s clinical Removable Posthodontics 4th edition
![Page 38: 2. principles of designing rpd with special emphsis on support and perio](https://reader036.vdocuments.us/reader036/viewer/2022062319/554b3f9cb4c905b5378b4a68/html5/thumbnails/38.jpg)
OCCLUSION AS A FACTOR
Disharmonious occlusion
generate horizontal stresses
when magnified by factor of leverage
can transmit destructive forces to both abutment teeth and residual ridge.
Stewart’s clinical Removable Posthodontics 4th edition
![Page 39: 2. principles of designing rpd with special emphsis on support and perio](https://reader036.vdocuments.us/reader036/viewer/2022062319/554b3f9cb4c905b5378b4a68/html5/thumbnails/39.jpg)
TYPE OF OPPOSING OCCLUSION
• Play important role in determining amount of stress generated by occlusion
• Natural teeth can exert closing force upto 300 pounds/inch square, whereas, complete denture upto 30 pounds/inch square.
• Therefore RPD constructed against removable prosthesis is subjected to much less occlusal stress than one opposed by natural dentition.
Stewart’s clinical Removable Posthodontics 4th edition
![Page 40: 2. principles of designing rpd with special emphsis on support and perio](https://reader036.vdocuments.us/reader036/viewer/2022062319/554b3f9cb4c905b5378b4a68/html5/thumbnails/40.jpg)
• AREA OF DENTURE BASE TO WHICH LOAD IS APPLIED
• Less movement of base if load applied adjacent to the abutment tooth than if it is applied to the distal end of the base.
• movement may be 4 times greater at distal end of base than next to the clasp.
![Page 41: 2. principles of designing rpd with special emphsis on support and perio](https://reader036.vdocuments.us/reader036/viewer/2022062319/554b3f9cb4c905b5378b4a68/html5/thumbnails/41.jpg)
BIOMECHANICAL CONSIDERATION OF
INDIVIDUAL COMPONENT
![Page 42: 2. principles of designing rpd with special emphsis on support and perio](https://reader036.vdocuments.us/reader036/viewer/2022062319/554b3f9cb4c905b5378b4a68/html5/thumbnails/42.jpg)
REST
Two basic types
Primary rest
Secondary rest
DIFERENT TYPES OF RESTS1) Occlusal rest2) Extended occlusal rest3) Incisal ,lingaul or cingulum rest4) Rest on restoration5) Rest on cast restorations
![Page 43: 2. principles of designing rpd with special emphsis on support and perio](https://reader036.vdocuments.us/reader036/viewer/2022062319/554b3f9cb4c905b5378b4a68/html5/thumbnails/43.jpg)
REST
FUNCTIONS• Provide vertical support for the partial denture.
• Maintains components in planned positions.
• Maintains established occlusal relations by preventing settling of the denture base.
• Prevents impingement of soft tissue.
• Directs and distributes occlusal loads to abutment teeth.
McCracken’s Removable Partial Prosthodontics 11 th edition
![Page 44: 2. principles of designing rpd with special emphsis on support and perio](https://reader036.vdocuments.us/reader036/viewer/2022062319/554b3f9cb4c905b5378b4a68/html5/thumbnails/44.jpg)
OCCLUSAL REST
McCracken’s Removable Partial Prosthodontics 11 th edition
![Page 45: 2. principles of designing rpd with special emphsis on support and perio](https://reader036.vdocuments.us/reader036/viewer/2022062319/554b3f9cb4c905b5378b4a68/html5/thumbnails/45.jpg)
If angle greater than 90 degrees
Forces not along long axis but will create an inclined plane effect
Slippage of prosthesis away from the abutment
Orthodontic like forcesMcCracken’s Removable Partial Prosthodontics 11 th edition
![Page 46: 2. principles of designing rpd with special emphsis on support and perio](https://reader036.vdocuments.us/reader036/viewer/2022062319/554b3f9cb4c905b5378b4a68/html5/thumbnails/46.jpg)
CINGULUM REST VS INCISAL REST
Cingulum rest nearer to center of rotation
less tipping of tooth
Incisal rest
Longer minor connector required
magnifies the forces being transferred to the abutment tooth
![Page 47: 2. principles of designing rpd with special emphsis on support and perio](https://reader036.vdocuments.us/reader036/viewer/2022062319/554b3f9cb4c905b5378b4a68/html5/thumbnails/47.jpg)
MESIAL REST or DISTAL REST FOR DEB RPD???
![Page 48: 2. principles of designing rpd with special emphsis on support and perio](https://reader036.vdocuments.us/reader036/viewer/2022062319/554b3f9cb4c905b5378b4a68/html5/thumbnails/48.jpg)
Kratochvil et al (JPD 1963:13;114)• Suggested using mesial occlusal rest so that the force
delivered to the mesial aspect of the abutment tooth
• That would tend to tip that tooth forward maintaining a tight contact with the tooth immediately anterior to it and gaining stabilization and support from the remaining anterior teeth.
• They suggested that occlusal rest be moved anterior to better use the residual ridge for support.
.Kratochvil et al influence of occlusal rest position and clasp design on movement of abutment teeth J Prosthet Dent 1963:13;114
![Page 49: 2. principles of designing rpd with special emphsis on support and perio](https://reader036.vdocuments.us/reader036/viewer/2022062319/554b3f9cb4c905b5378b4a68/html5/thumbnails/49.jpg)
John W. Mc Cartney (JPD 1980;43:15) Did a study on the effect of location of occlusal rest
on abutment tooth movement and concluded that the mesial rest placement caused less abutment movement than distal rest placement.
John W.McCartney Effect of location of rest and movement of abutment tooth J Prosthet Dent 1980:43:15
![Page 50: 2. principles of designing rpd with special emphsis on support and perio](https://reader036.vdocuments.us/reader036/viewer/2022062319/554b3f9cb4c905b5378b4a68/html5/thumbnails/50.jpg)
A major connector is the component of the partial denture that connects the parts of the prosthesis located on one side of the arch with those on the opposite side.
it also provides cross arch
stability to help resist displacement stresses
MAJOR CONNECTOR
McCracken’s Removable Partial Prosthodontics 11 th edition
![Page 51: 2. principles of designing rpd with special emphsis on support and perio](https://reader036.vdocuments.us/reader036/viewer/2022062319/554b3f9cb4c905b5378b4a68/html5/thumbnails/51.jpg)
DESIRABLE CHARACTERISTICS OF MAJOR CONNECTORS
1.Should be rigid
2.Provide vertical support and protect the soft tissue.
3.Provide means of obtaining indirect retention where indicated
4.Provide an opportunity of positioning denture bases where needed
5.Maintain patient comfort
McCracken’s Removable Partial Prosthodontics 11 th edition
![Page 52: 2. principles of designing rpd with special emphsis on support and perio](https://reader036.vdocuments.us/reader036/viewer/2022062319/554b3f9cb4c905b5378b4a68/html5/thumbnails/52.jpg)
MINOR CONNECTOR
1.Primary function is to join other units of the prosthesis such as clasp,rests,indirect retainers and denture bases to major connector
2.Distribution of stresses
McCracken’s Removable Partial Prosthodontics 11 th edition
![Page 53: 2. principles of designing rpd with special emphsis on support and perio](https://reader036.vdocuments.us/reader036/viewer/2022062319/554b3f9cb4c905b5378b4a68/html5/thumbnails/53.jpg)
DESIGN CONSIDERATIONS
1.Should have sufficient bulk to be rigid
2. Should be made thick buccolingually and thin mesiodistally
3.Should be in triangular form in embrassure
4. Should form a right angle with the major connector
5. Sharp angles should be avoided and spaces should not exist for trapping of food debris.
Miller E.L. : “Text book of Removable Partial Prosthodontics”.
![Page 54: 2. principles of designing rpd with special emphsis on support and perio](https://reader036.vdocuments.us/reader036/viewer/2022062319/554b3f9cb4c905b5378b4a68/html5/thumbnails/54.jpg)
Any unit of removable dental prosthesis that engages an abutment tooth in such a manner as to resist displacement of the prosthesis away
from basal seat tissue.
DIRECT RETAINER
McCracken’s Removable Partial Prosthodontics 11 th edition
![Page 55: 2. principles of designing rpd with special emphsis on support and perio](https://reader036.vdocuments.us/reader036/viewer/2022062319/554b3f9cb4c905b5378b4a68/html5/thumbnails/55.jpg)
• Prothero Cone theory as basis of clasp retention
• Described shape of crowns of premolar and molar teeth as 2 cones sharing a common base . Line where they meet height of contour. (represents the greatest bulge).
• Suprabulge• Infrabulge
McCracken’s Removable Partial Prosthodontics 11 th edition
![Page 56: 2. principles of designing rpd with special emphsis on support and perio](https://reader036.vdocuments.us/reader036/viewer/2022062319/554b3f9cb4c905b5378b4a68/html5/thumbnails/56.jpg)
• Height of contour of tooth changes as the vertical position of tooth changes.
• Surface is retentive if it is cervical to its height of contour.
McCracken’s Removable Partial Prosthodontics 11 th edition
![Page 57: 2. principles of designing rpd with special emphsis on support and perio](https://reader036.vdocuments.us/reader036/viewer/2022062319/554b3f9cb4c905b5378b4a68/html5/thumbnails/57.jpg)
• Clasp tip in infrabulge area resist the movement in occlusal direction because to release from tooth it has to undergo deformation.
• Degree of resistance to deformation determines the amount of clasp retention.
• Retention varied by: depth of undercut Flexibility of clasp arm positioned in undercut
Stewart’s Clinical removable partial Prosthodontics 4th edition
![Page 58: 2. principles of designing rpd with special emphsis on support and perio](https://reader036.vdocuments.us/reader036/viewer/2022062319/554b3f9cb4c905b5378b4a68/html5/thumbnails/58.jpg)
STRATEGIC CLASP POSITIONING AS A MEANS OF STRESS CONTROL
• Leverages can be controlled to a large extent by means of clasps, if there are sufficient abutment teeth and they are strategically distributed in the dental arch.
• If number and location of potential abutments is less than ideal harmful effects can be decreased by strategic placement of clasps.
Stewart’s Clinical removable partial Prosthodontics 4th edition
![Page 59: 2. principles of designing rpd with special emphsis on support and perio](https://reader036.vdocuments.us/reader036/viewer/2022062319/554b3f9cb4c905b5378b4a68/html5/thumbnails/59.jpg)
• Indicated most often in class III arches (with modification space on opposite side)
QUADRILATERAL CONFIGURATION
McCracken’s Removable Partial Prosthodontics 11 th edition
![Page 60: 2. principles of designing rpd with special emphsis on support and perio](https://reader036.vdocuments.us/reader036/viewer/2022062319/554b3f9cb4c905b5378b4a68/html5/thumbnails/60.jpg)
TRIPOD CONFIGURATION
Class II situations
Distal abutment on one
side of arch missing
leverage controlled to
some extent by creating
tripod configuration
of clasp placement.
McCracken’s Removable Partial Prosthodontics 11 th edition
![Page 61: 2. principles of designing rpd with special emphsis on support and perio](https://reader036.vdocuments.us/reader036/viewer/2022062319/554b3f9cb4c905b5378b4a68/html5/thumbnails/61.jpg)
BILATERAL CONFIGURATION
For class I situations
Not considered ideal, but best option available
Stress must be controlled by other means.
McCracken’s Removable Partial Prosthodontics 11 th edition
![Page 62: 2. principles of designing rpd with special emphsis on support and perio](https://reader036.vdocuments.us/reader036/viewer/2022062319/554b3f9cb4c905b5378b4a68/html5/thumbnails/62.jpg)
REQUIREMENTS OF CLASP DESIGN
:• Retention:provided by retentive terminal• Support:mainly by rest • Stability:all the component except the
retentive terminal• Reciprocation:reciprocal arm• Encirclement:must be designed more than
half of the circumference• Passivity:engages only when dislodging forces
are appliedMcCracken’s Removable Partial Prosthodontics 11 th edition
![Page 63: 2. principles of designing rpd with special emphsis on support and perio](https://reader036.vdocuments.us/reader036/viewer/2022062319/554b3f9cb4c905b5378b4a68/html5/thumbnails/63.jpg)
CLASP DESIGNS:
• Combination clasp
• Reverse circlet clasp
![Page 64: 2. principles of designing rpd with special emphsis on support and perio](https://reader036.vdocuments.us/reader036/viewer/2022062319/554b3f9cb4c905b5378b4a68/html5/thumbnails/64.jpg)
• Bar clasp
• T Clasp
• Modified T Clasp
• Y clasp
• I clasp
![Page 65: 2. principles of designing rpd with special emphsis on support and perio](https://reader036.vdocuments.us/reader036/viewer/2022062319/554b3f9cb4c905b5378b4a68/html5/thumbnails/65.jpg)
• RPI system
![Page 66: 2. principles of designing rpd with special emphsis on support and perio](https://reader036.vdocuments.us/reader036/viewer/2022062319/554b3f9cb4c905b5378b4a68/html5/thumbnails/66.jpg)
INDIRECT RETAINER
![Page 67: 2. principles of designing rpd with special emphsis on support and perio](https://reader036.vdocuments.us/reader036/viewer/2022062319/554b3f9cb4c905b5378b4a68/html5/thumbnails/67.jpg)
Function: 1. to prevent the DEB from moving away from its seat because of cheek and tongue forces, sticky food.
It uses mechanical advantage of leverage by moving the fulcrum line farther from the force
McCracken’s Removable Partial Prosthodontics 11 th edition
![Page 68: 2. principles of designing rpd with special emphsis on support and perio](https://reader036.vdocuments.us/reader036/viewer/2022062319/554b3f9cb4c905b5378b4a68/html5/thumbnails/68.jpg)
2. Contributes to support and stability of the partial denture counteracts horizontal forces applied to the denture.
![Page 69: 2. principles of designing rpd with special emphsis on support and perio](https://reader036.vdocuments.us/reader036/viewer/2022062319/554b3f9cb4c905b5378b4a68/html5/thumbnails/69.jpg)
Effectiveness of indirect retainer depends upon:
1) Its distance from the fulcrum line greater the distance between fulcrum line
and IR more effective
![Page 70: 2. principles of designing rpd with special emphsis on support and perio](https://reader036.vdocuments.us/reader036/viewer/2022062319/554b3f9cb4c905b5378b4a68/html5/thumbnails/70.jpg)
2) Effectiveness of direct retainer Direct retainer must be effective if the
indirect retainer is to function when the denture rotates
otherwise the partial denture will be dislodged.
![Page 71: 2. principles of designing rpd with special emphsis on support and perio](https://reader036.vdocuments.us/reader036/viewer/2022062319/554b3f9cb4c905b5378b4a68/html5/thumbnails/71.jpg)
Frank and Nicholls (JPD 1977:38;494)11
-did a study on the effectiveness of indirect retainer and concluded that use of a mesial rest instead of a distal rest on the terminal abutment tooth does not decrease indirect retention.
Thus the choice of indirect retainer location should be made mostly on the basis of abutment tooth support, a
crown form favoring adequate rest seat preparation, and the patients esthetic desires.
![Page 72: 2. principles of designing rpd with special emphsis on support and perio](https://reader036.vdocuments.us/reader036/viewer/2022062319/554b3f9cb4c905b5378b4a68/html5/thumbnails/72.jpg)
Frechette et al (JPD 1956;6:195-212)
demonstrated that removal of the indirect retainers from a RPD results in the application of more
pressure to the direct abutment teeth. The indirect retainer probably is effective in distributing forces to teeth other than direct abutments, and in preventing
denture base lifting.
![Page 73: 2. principles of designing rpd with special emphsis on support and perio](https://reader036.vdocuments.us/reader036/viewer/2022062319/554b3f9cb4c905b5378b4a68/html5/thumbnails/73.jpg)
PHILOSOPHIES OF DESIGN
• There are three basic design philosophies:• Stress Equalization• Physiologic Basing• Broad stress distribution
![Page 74: 2. principles of designing rpd with special emphsis on support and perio](https://reader036.vdocuments.us/reader036/viewer/2022062319/554b3f9cb4c905b5378b4a68/html5/thumbnails/74.jpg)
ESSENTIALS OF PARTIAL DENTURE DESIGN
• Should be systematically developed on the diagnostic cast based on the following.
1) Where is the prosthesis supported.
2) How the support is connected.
3) How the prosthesis is retained.
4) How the retention and support are connected.
5) How the edentulous base support is connected
McCracken’s Removable Partial Prosthodontics 11 th edition
![Page 75: 2. principles of designing rpd with special emphsis on support and perio](https://reader036.vdocuments.us/reader036/viewer/2022062319/554b3f9cb4c905b5378b4a68/html5/thumbnails/75.jpg)
WHERE IS THE PROSTHESIS SUPPORTED.
Tooth supported
Tooth - tissue supported:
![Page 76: 2. principles of designing rpd with special emphsis on support and perio](https://reader036.vdocuments.us/reader036/viewer/2022062319/554b3f9cb4c905b5378b4a68/html5/thumbnails/76.jpg)
TOOTH SUPPORTED
1) The most ideal support units are the RESTS.
2) The abutment selected for the support has to be evaluated for
• Periodontal health.• Crown- root ratio.• Crown –root morphology• Location of the tooth in the arch• The opposing dentition
![Page 77: 2. principles of designing rpd with special emphsis on support and perio](https://reader036.vdocuments.us/reader036/viewer/2022062319/554b3f9cb4c905b5378b4a68/html5/thumbnails/77.jpg)
TOOTH- TISSUE SUPPORTED
Depends on 6 factors:-
1) Quality of residual ridge
2) The extent to which the ridge will be covered by mucosa
3) The accuracy and type of impression registration
4) The design chracteristics
5) The occlusal load applied
![Page 78: 2. principles of designing rpd with special emphsis on support and perio](https://reader036.vdocuments.us/reader036/viewer/2022062319/554b3f9cb4c905b5378b4a68/html5/thumbnails/78.jpg)
STRESS EQUALIZATION
• The resiliency of the tooth supported by periodontal ligament in an apical direction is not comparable to the greater resiliency and displacement of the mucosa covering the dentulous ridge.
• It is the belief of this school of thought that the rigid connection
between the denture base and the direct retainer on the abutment teeth is damaging
![Page 79: 2. principles of designing rpd with special emphsis on support and perio](https://reader036.vdocuments.us/reader036/viewer/2022062319/554b3f9cb4c905b5378b4a68/html5/thumbnails/79.jpg)
• Thus some form of stress director or stress equalizer is essential to protect the abutment teeth.
• The most commonly used ones are composed of a hinge device interposed between the minor connector of the abutment tooth and the denture base.
![Page 80: 2. principles of designing rpd with special emphsis on support and perio](https://reader036.vdocuments.us/reader036/viewer/2022062319/554b3f9cb4c905b5378b4a68/html5/thumbnails/80.jpg)
PHYSIOLOGIC BASING
The belief is that the equalization can best and most simply be accomplished by some form of physiologic basing.
• The physiologic basing is produced either by
• Displacing or depressing the ridge mucosa during the impression making procedure
• Relining the denture base after it has been constructed.
![Page 81: 2. principles of designing rpd with special emphsis on support and perio](https://reader036.vdocuments.us/reader036/viewer/2022062319/554b3f9cb4c905b5378b4a68/html5/thumbnails/81.jpg)
Displacing the mucosa during the impression procedure records it in its functioning and not the anatomic form.
This denture base formed over displaced tissue, will adapt more readily to the depressed tissue when occlusal force acts and will be better able to withstand the force that is generated
![Page 82: 2. principles of designing rpd with special emphsis on support and perio](https://reader036.vdocuments.us/reader036/viewer/2022062319/554b3f9cb4c905b5378b4a68/html5/thumbnails/82.jpg)
BROAD STRESS DISTRIBUTION
distributing the forces of occlusion over as many teeth and as much of the available soft tissue area as possible.
This is accomplished by the use of additional rests, indirect retainers, clasps and broad coverage denture bases
![Page 83: 2. principles of designing rpd with special emphsis on support and perio](https://reader036.vdocuments.us/reader036/viewer/2022062319/554b3f9cb4c905b5378b4a68/html5/thumbnails/83.jpg)
STEP BY STEP DESIGNING
Diagnostic cast area of recontouring
Black-mark survey lines desired undercut is measured
![Page 84: 2. principles of designing rpd with special emphsis on support and perio](https://reader036.vdocuments.us/reader036/viewer/2022062319/554b3f9cb4c905b5378b4a68/html5/thumbnails/84.jpg)
Desired rest seat-red desired denture base-blue
Major connector-brown
![Page 85: 2. principles of designing rpd with special emphsis on support and perio](https://reader036.vdocuments.us/reader036/viewer/2022062319/554b3f9cb4c905b5378b4a68/html5/thumbnails/85.jpg)
Retentive elements completed –rt side
Left side occlusal
![Page 86: 2. principles of designing rpd with special emphsis on support and perio](https://reader036.vdocuments.us/reader036/viewer/2022062319/554b3f9cb4c905b5378b4a68/html5/thumbnails/86.jpg)
• CONCLUSION
![Page 87: 2. principles of designing rpd with special emphsis on support and perio](https://reader036.vdocuments.us/reader036/viewer/2022062319/554b3f9cb4c905b5378b4a68/html5/thumbnails/87.jpg)
REFERENCES
1) McCracken’s removable partial Prosthodontics 11th edition.
2) Stewart’s Removable partial Prosthodontics 4th edition.
3) David M Watt; A Roy Macgregar :Designing partial dentures.
4) Miller E.L. : “Text book of Removable Partial Prosthodontics”. St. Louis, CV Mosby Co.
![Page 88: 2. principles of designing rpd with special emphsis on support and perio](https://reader036.vdocuments.us/reader036/viewer/2022062319/554b3f9cb4c905b5378b4a68/html5/thumbnails/88.jpg)
5) Kratochvil et al influence of occlusal rest position and clasp design on movement of abutment teeth J Prosthet Dent 1963:13;114
6) John W.McCartney effect of location of rest and movement of abutment tooth J Prosthet Dent 1980:43:15
7) David N Firtell reaction of anterior abutment of kennedy classII removable partial denture to various clasp arm designs J Prosthet Dent 1985:53;77
8) Richard P Frank direct retainers for distal extension removable partial dentures J Prosthet dent 1986:56;562
![Page 89: 2. principles of designing rpd with special emphsis on support and perio](https://reader036.vdocuments.us/reader036/viewer/2022062319/554b3f9cb4c905b5378b4a68/html5/thumbnails/89.jpg)
9) Frank and Nicholis an investigation of effectiveness of indirect retainer J Prosthet dent 1977:38;494
10)Frechette et al the influence of partial denture design on distribution of force to abutment teeth J Prosthet Dent 1956:6;195
11) A.H.Schmidt Planning and designing removable partial denture J Prosthet Dent 1953:3;783
![Page 90: 2. principles of designing rpd with special emphsis on support and perio](https://reader036.vdocuments.us/reader036/viewer/2022062319/554b3f9cb4c905b5378b4a68/html5/thumbnails/90.jpg)
THANK YOU