2 camera mobile digital video recorder router easy ......3. video displays on monitor. adjust camera...

RW2S Quick Setup Guide - English - R1

b

1 x LOREX ROAD WARRIOR1 x MOUNTING BRACKET WITH BUILT-IN GPS ANTENNA1 x MONITOR CABLE (VIDEO)1 x CAR ADAPTER (CIGAR JACK)1 x PANIC BUTTON EXTENSION CABLE1 x SDHC MEMORy CARD1 x SDHC MEMORy CARD READER1 x DOUBLE SIDED ADHESIVE, ZIP TIES, ZIP TIE ANCHORS1 x ELECTRONIC INSTRUCTION MANUAL (INSIDE CD)1 x QUICK START GUIDE1 x SOFTWARE CD

PACKAGE CONTENTS:

2 CAMERA MOBILE DIGITAL VIDEO RECORDER

Information in this document is subject to change without notice. As our products are subject to continuous improvement, Lorex Technology INC. and our subsidiaries reserve the right to modify product design, specifications and prices, without notice and without incurring any obligation. E&OE © 2009 LOREX. All rights reserved.

RW2S Road Warrior Series

Quick Setup GuideSkill Level

Intermediateeasy advanced

Time

under 30 minutesunder 15 minutes under 60 minutes

Hand Tools Hardware

Router

Hi Speed

over 60 minutes

Skill Level


Time


Hand Tools Hardware

Router

Hi Speed

over 60 minutes

Time: 20 Minutes Hand Tools Skills - Easy

BASIC INSTALLATION GUIDE

BASIC SETUP

STEP 1

GETTING TO KNOW YOUR ROAD WARRIOR

STEP 2 Skill Level


Time


Hand Tools Hardware

Router

Hi Speed

over 60 minutes

Time: 20 Minutes Skills - Easy


Getting to Know Your Road Warrior

1

Congratulations! you have completed STEP 1 & 2 successfully. your Road Warrior is now ready to use. Refer to the owner’s manual to learn how to record, playback, use the other features available with this device.

Skill Level


Time


Hand Tools Hardware

Router

Hi Speed

over 60 minutes

Skill Level


Time


Hand Tools Hardware

Router

Hi Speed

over 60 minutes



BASIC SETUP

STEP 1

CONTINUED

It’s all on the Webwww.lorexcctv.comFor detailed setup information, please refer to your electronic User’s Manual inside the software CD. For additional information, please visit our website www.lorexcctv.com

5Mount the Road Warrior:

Mounting the Road Warrior at the correct angle allows the unit to recieve optimal GPS reception and recording angles.

a. Stick the double-sided adhesive onto the base of the mounting bracket.b. Secure the unit to the right of your rear-view mirror. Position the unit so that it does not interfere with your view.c. Press and hold mounting base firmly to the windshield for three seconds to secure the unit in place.d. Adjust mounting bracket angle by loosening the screws on the side. Tighten screws to secure position.

NOTE: The Road Warrior takes 30 seconds to start up. Wait for the GPS LED to glow solid green, followed by a beep before driving. The REC and POWER LEDs glow solid red.CAUTION: During normal operation, the REC, GPS and POWER LEDs will always be on.

2

Insert the SDHC Memory Card:a. Open the SD memory slot cover.b. Insert the SDHC memory card into the slot with the sticker face up, and upright. Push memory card firmly until you hear a click. Memory card locks in place.c. Close SD memory slot cover.

NOTE: The SDHC memory card should slide smoothly into the memory slot. The SDHC memory card is designed to go in one way only. Do not force in the card.

3

Install the Mounting Bracket:a. Plug the minijack connector from the mounting bracket into the side of the Road Warrior labeled GPS.b. Slide mounting bracket upwards on the back of the device. Mounting bracket locks in place.c. Connect one end of the car adapter to the Road Warrior and the other end to the car cigar lighter port.

a

c

1. Infrared LEDs (IR LEDs)2. In-car Camera3. Daylight Sensor4. REC LED, GPS LED, POWER LED5. Emergency Button6. Mic7. DC12V Port8. Channel Switch Button9. Mini Serial Port10. GPS Jack11. Monitor OUT12. SDHC Memory Slot13. Emergency Button Port14. Adjustable Driver-View camera15. Rear Mounting Slot16. Mini-jack connector17. GPS Sensor18. Mounting Bracket Screws

4

Installing the Panic Button Extension Cable: (Optional)

1. Remove rubber cover on the left side of the unit with a thin, rigid object such as a paper clip2. Insert the end of the panic button extension into the EMGCy port. 3. Run the cable through the dashboard so that it is concealed and out of view.4. Remove double-sided adhesive on the back of the panic button, and stick on a clean surface.

NOTE: The end of the panic button extension only connects one way into the EMGCy port. Do not force in.

The panic button extension allows you to record an event immediately. Place the panic button extension where you can easily reach.

Powering the Road Warrior:

6

Connecting a Monitor (Optional): (not included)

1. Connect the mini-jack from the video cable into the Monitor port on the side of the unit.2. Connect the yellow RCA cable into the portable display (not included).3. Video displays on monitor. Adjust camera angles as needed.To change camera views:1. Press the CH button on the side of the unit to change between channel 1 and channel 2. This switches camera views between the in-car camera, and the Driver-View Camera.

8 Power ON your car. It takes about 30 seconds for the device to boot up. Once the 3 LEDs on the device lights up and you hear a short beep, the device is ready to record.NOTE: The 3 LEDs will always be seen lit once the device powered up.

7

Camera Adjustment:The Driver-View Camera adjusts to three angles. Push camera up or down to lock in place. NOTE: UP position is recommended.

16

1718

12 13

7 8 9 10 11

14

15

12

3

4

5

6

9

Using the Emergency Button:The emergency button engages the Road Warrior to record at maximum quality, and marks the event as “Emergency” when viewing the file in the Lorex Viewer.

When you press the emergency button:

a. The video records at maximum of 30 FPS.

b. The video is tagged as an “Emergency” event that you can later search and categorize using the Lorex Viewer.

Skill Level


Time


Hand Tools Hardware

Router

Hi Speed

over 60 minutes

Skill Level


Time


Hand Tools Hardware

Router

Hi Speed

over 60 minutes



BASIC SETUP

STEP 1

CONTINUED

Setting the Date & Time:

1 1. Insert the SDHC memory card into the memory card reader and plug memory card reader into your computer’s USB port.NOTE: Use the included memory card reader to ensure compatibility.NOTE: The SDHC memory card smoothly slides all the way into the memory card reader. The SDHC memory card goes in one way only. Do not force in the card.2. Click OK on the log in window prompt. The default login is: admin. The default password is left blank.

3. Click the (Setup) button.The Setup window opens. 2. In the Systems tab, under Standard time zone, select your time zone. Click OK. The Save As window appears.3. Locate the SDHC memory card reader directory. Click Save.NOTE: Make sure that you save the .CFG file onto your SDHC memory card, and NOT onto your computer hard drive (i.e. C:\). All Road Warrior Settings must save onto the SDHC memory card.4. Eject memory card and insert into the Road Warrior. your Road Warrior automatically synchronizes the date with the satellite once powered on.

(On your Computer)To set the time and date, you must

first install the Lorex Viewer software (included) to your computer. See Step

3 for Software Installation.

ATTENTION: • Monitor is not included.• Computer (not included) is required for playback and viewing the downloaded video files.• For detailed setup and software information, please refer to the User’s manual included inside the software CD.

a

b

c

NOTE: In some vehicles, the cigar lighter continues to provide power even when the engine of the vehicle is turned off. In such vehicles the Road Warrior will continue to record the events .

RW2S Quick Setup Guide - English - R1

USING THE LOREX VIEWER

STEP 4

It’s all on the Webwww.lorexcctv.comFor detailed setup information, please refer to your electronic User’s Manual inside the software CD. For additional information, please visit our website www.lorexcctv.com

SOFTWARE INSTALLATION GUIDETime: 30 Minutes Skills - IntermediateHardware

PCSkill Level


Time


Hand Tools Hardware

Router

Hi Speed

over 60 minutes

9

Enabling Google Maps ViewThe Lorex Viewer tracks the location of your vehicle, and displays the tracking information on Google Maps. This feature allows you to pinpoint the location that an event occoured.

To start Google Maps™ view:Click on the play button on the GoogleMaps window. Google Map connects, and shows the current location of the vehicle on the map.

NOTE: Google Maps requires an internet connection to function.

you can manipulate how Google Maps displays the map by clicking the Hybrid or Map button.

1

Converting files into AVI formatyou can convert your video files into .AVI format so that you can archive the video. By default, the video files are encrypted with proprietary compression that is NOT playable alone. The video files by default, encrypts with a proprietary compression that is NOT playable alone. To have your video files play as a stand-alone file, you must compress the files using the Lorex Viewer.NOTE: To play back the video after you have converted it using the Lorex Viewer, you need a third party video codec. Search online for the “FFDSHOW CODEC”. Download and install FFDShow. Once you have installed the codec, you are ready to view backed up files from Lorex Viewer.

To compress your video file:1. Click the video you wish to backup from the Event browser. you can only select one event at a time.2. Click the button to open the backup button icon.3. Click the radio button. Under Select AVI, select AVI and click OK.4. The Backup-Data Settings window opens.5. Select the channel you wish to back up under Select Channel (Inside Cam or Outside Cam).6. Select the checkbox under Audio ON/OFF to enable or disable sound.7. Click the browse button under Backup-Data Path to select the directory you wish to save your file and then click Save.8. Click Next to backup and compress your video. A confirmation window appears. Click Finish to close the window.

STEP 4

CONTINUED

USING THE LOREX VIEWER


PCSkill Level


Time


Hand Tools Hardware

Router

Hi Speed

over 60 minutes

2

How the Road Warrior Interprets Bumps and Impacts

When your vehicle goes over a bump or recieves sudden forces, the built-in sensor causes the REC LED on the unit to flash for several seconds. This means the Road Warrior has marked the event. When an event is marked, you can easily categorize and find the particular moment when you encountered the sudden bump or impact.

5

Viewing Recorded Video Files

The Lorex Viewer allows you to play, save, and manage your recorded footage from the Road Warrior memory card. Always use the Lorex Viewer to play files recorded from the Road Warrior.

Once you have recorded video files on your Road Warrior, you can view them on the Lorex Viewer.

Connect memory card to computer

6 1. Insert the SDHC memory card from the Road Warrior into the memory card reader.

2. Plug in the memory card reader into your computer’s USB port.

Launch Lorex Viewer

7 1. Launch Lorex Viewer from the desktop shortcut, or navigate to Start>Programs> Lorex_V2>Lorex_V2

2. Click the OK button to log in to the viewer. By default, the user name is “admin” (no quotes) and the password field is left blank.3. your video files on the memory card appear in the Event Viewer on the top-right corner of the Lorex Viewer.4. Click on the desired file in the Event Viewer. your video files are categorized by Time/ Date or by Event type. Click on Time/Date or Event to sort. For example, if you want to sort your videos by event type, click Event in the Event Window.

4

Lorex Viewer Software Setup:(On your Computer)

In the LOGIN screen, click OK. By default, the LOGIN name is admin. PASSWORD field is blank. NOTE: you can assign a Password to the device by clicking the Setup Menu and adding a Password under the User Settings tab.

(On your Computer)

(On your Computer)

(On your Computer)

5. Click the (Play) button to start the video.

Using Video Controls

8 Rewind Play Timeline SliderPicture in Picture

Single-Channel View

Step Backward Single Frame

Pause Step Forward Single Frame

Speed SliderTwo Channel View

(On your Computer)

STEP 5

DID YOU KNOW


PCSkill Level


Time


Hand Tools Hardware

Router

Hi Speed

over 60 minutesLOREX VIEWER SOFTWARE

STEP 3

1 Insert the Lorex Viewer Software CD into your computer’s CD ROM. Click Next and follow the installation screens to complete the Software installation.

Install Software:

Close the CD Menu Screen. LorexViewer icon will appear on your desktop.

2

Lorex Viewer Software:

(On your Computer)

(On your Computer)

Double-click the Lorex Viewer software icon on your desktop to run the program.3

Run the Lorex Viewer Software:(On your Computer)


PCSkill Level


Time


Hand Tools Hardware

Router

Hi Speed

over 60 minutes

1

2

3

4 5 6 7 8 9

10

11

12

1. Main Viewer Window2. Login Prompt3. Video Slider4. Video Controls5. Vehicle Speed Display6. Playback Speed Slider7. Channel View Modes8. Volume Slider9. Viewer Settings10. Google Maps Viewer11. Event Window12. Event Search Button

The Lorex Viewer allows you to organize, view, and save your video files. The Lorex Viewer also allows you to change specific recording parameters of your Road Warrior.

STEP 6

TIPS

1

Back up your videosBack up your videos regularly to external media such as blank CDs or DVDs (not included). To reduce the risk of losing recorded video on the Road Warrior, make an extra copy of all important videos. All Road Warrior videos are stored in the data folder in the SDHC memory card. Videos end in a .JDF extension.

2

Replacing your SDHC memory cardThe SDHC memory card included with your Road Warrior is a high-grade, Class-6 memory card. SDHC stands for Secure Digital High Capacity, and provides extended memory capacity compared to normal SD memory cards. Always replace damaged memory cards with Class-6 SDHC memory cards. The maximum supported size is 32 GB gigabytes.

3

Maintaining memory card healthBack up your files regularly, and format your SDHC memory card monthly. This ensures that the memory card operates error-free. After you format your SDHC memory card, you can restore your user settings.

4

Viewing videos on your SDHC memory cardAlways use the included SDHC memory card reader to view video files on your computer. Should you lose or damage the included memory card reader, replace it with a SDHC memory card reader only.

5

Obtaining GPS signalsAlways keep the GPS mounting bracket clear of obstructions.The Road Warrior seeks GPS signals when it is powered on. Depending on weather conditions and your environment, it may take longer than usual for the GPS signal to lock in. If you are inside a garage, you may have to move your vehicle outdoors before the Road Warrior can detect a signal.

6

Preventing data loss on your SDHC memory cardAlways power off your Road Warrior before removing the SDHC memory card. Removing the SDHC memory card when the Road Warrior is on may corrupt the files.

2 camera mobile digital video recorder router easy ......3. video displays on monitor. adjust camera...

Documents