2 0 1 1 · table of contents 2 table of contents 4 color 9 fl ooring designer 10 ecoeffects ® 12...

P R O D U C T S G U I D E2 0 1 12 0 1 1P R O D U C T S G U I D E2 0 1 1P R O D U C T S G U I D EP R O D U C T S G U I D E2 0 1 1P R O D U C T S G U I D E

hospitality

corporate

education

healthcare

table of contents2 table of contents

4 color

9 fl ooring designer

10 ecoeffects®

12 safety compliance

14 dimensions rubber tile

16 raised design rubber tile

18 smooth | marbleized rubber tile

20 safetcork® slip resistant rubber tile and tread

22 fi esta® rubber tile and tread

24 designer’s choice® rubber tile

26 spike/skate resistant tile

27 metal treads

28 recoil fi tness fl ooring

30 tufl ex® recycled rubber tile

32 rop-cord® recycled rubber tile

34 esd static control rubber tile

36 northern timbers premium vinyl wood plank

38 northern leathers premium vinyl leather tile

40 wood naturals™ solid vinyl tile

42 safetcork® solid vinyl tile

44 esd static control vinyl tile

46 rubber stair treads

50 vinyl stair treads

52 pinnacle rubber base | alphabase®

54 basemates® stackable trim molding system

56 pinnacle plus wall base | rubber corner blocks

58 visuellé® wall base

60 700 series wall base | vinyl base

62 rubber accessories

66 vinyl accessories

68 subfl oor leveler

70 adhesives

72 product specifi cations

87 warranty & contact information

roppe corporation offers to you our Quick 6. these are the 6 most important features and benefi ts of each product brand located within each product segment and on our Web site.

Visit the new roppe.com for the latest information on products, colors, specifi cations and technical data, plus visualize your designs with our new fl ooring designer program. read more about our

online fl ooring designer

on page 9.

2 taBLe of contents

1.800.537.9527 | roppe.com

why choose Roppe?roppe – proven. flooring. experiences. of course, if you have been a roppe distributor partner or employee for any time, that answer is easily given.However, the answer may vary slightly depending on what position you hold within the organization. But what if you are using roppe products for the fi rst time, or working with the local distributor for the fi rst time?

choosing roppe means that you are choosing to work with a product partner that is proven. roppe is celebrating over 50 years as a leading manufacturer in the commercial fl ooring industry. our company is family owned, and is a very integral part of the small Midwestern town of fostoria, ohio, where our headquarters are located. the longevity of our company is a testament to the employees that live local to this community and take pride in every product that is manufactured, shipped and delivered to our end-users. our products have stood the test of time, and our service and commitment to the commercial fl ooring industry is proven.

choosing roppe means that you are choosing to work with a product partner that has centralized its product mix around flooring. the commercial fl ooring industry has many manufacturers. roppe

realizes the importance of having a range of products readily available to end-users, so the job can be completed in a timely manner. the need to work with several suppliers is usually unnecessary, as we offer all of the products that are needed to provide a clean, fi nished, professionally designed interior space. roppe is fl ooring.

choosing roppe means that you are choosing to work with a product partner that has many positive experiences from within the fi eld to share. When you think of the last job you installed or sold, do you have a positive and satisfying recollection of the vendor that you worked with? When you choose roppe, you will always fi nish the project knowing that you partnered with one of the best manufacturers that the commercial fl ooring industry has to offer! the entire roppe team works to provide you with the added benefi ts of innovative products, great customer service, fl exible logistics requirements and the industry’s fi rst single price point system! all colors from Black to pink – one price per product in our major product lines: wall base, tile, treads and accessories.

Being the easiest company in the commercial fl ooring industry to do business with is a long-standing goal for the entire roppe team. We invite you to share in the proven. flooring. experiences. that make roppe the partner you want to work with!

Visit us on the Web at roppe.com, or call our helpful customer service staff at 1.800.537.9527.dependability – all the time, every time.

1.800.537.9527 | roppe.com

3WHY cHoose roppe?

WH

Y cH

oo

se roppe?

single price pointWhat could be simpler?

Most major roppe product

lines are available at a

single price point. so opt

for any color. it’s one price

for all colors within those

product lines. Look for

this symbol noting

roppe’s single price point

product lines.

c o L o r s70

100 black

177 steel blue

150 dark gray

616platinum

193black brown

123charcoal

114lunar dust

129dolphin

178 pewter

194burnt umber

148steel gray

175slate

174smoke

197iceberg

110brown

147light brown

619java

181russet

182toffee

623nutmeg

624chameleon

140fawn

191camel

125fi g

171 sandstone

130 buckskin

198 ivory

632 fl ax

184 almond

170 white

131 bisque

629 golden

127 harvest yellow

631 sahara

622 brass

625 bronze

124 taupe

122 natural

633 gingko

628 shamrock

195 light gray

116 moss

634 olive

630 pine

113 pistachio

160 forest green

118 peacock

169 hunter green

146 turquoise

606 tropical blue

187 blue

154 salem blue

165 colonial blue

139 deep navy

627 mariner

618 aubergine

621 merlin

620 plum

185 burgundy

137 cinnabar

186 red

613 azalea

615 cream

626 tangerine

617 terracotta

188 brick

120 tan

133 golden honey

167 spice

161 snow

12

t i L e , t r e a d a n d t s , t p a n d t V W a L L B a s e

1.800.537.9527 | roppe.com

4 coLor

color7 0 c o L o r s . o n e p r i c e . i t ’ s Y o u r c H o i c e .

100 black

177 steel blue

150 dark gray

193black brown

114lunar dust

178 pewter

194burnt umber

175slate

174smoke

110brown

182toffee

140fawn

191camel

171 sandstone

184 almond

631 sahara

195 light gray

116 moss

634 olive

118 peacock

169 hunter green

187 blue

165 colonial blue

139 deep navy

621 merlin

185 burgundy

137 cinnabar

617 terracotta

167 spice

198 ivory

r u B B e r a n d V i n Y L a c c e s s o r i e s

our updated color palette for rubber tile, tread and ts, tp and tV wall base includes forecasted colors as well as the most popular hues being used in design today.

safetcork® Vinyl tile and the fiesta® rubber tile and tread lines have also been refreshed to coordinate with the

new palette of colors. Visuellé® and accessory lines are now available in the 30 most popular colors. When you

consider that roppe also offers unique products such as our safetcork® rubber tile and tread and a new subtle

marbled look that combine to create over 200 colorways that work interchangeably to create beautiful spaces

where we work, learn, shop, live or recover from illness – is there an easier system to select products from? all of

this, plus our revolutionary single price point pricing structure that allows you the choice to select colors based

on your design, not your budget!

1.800.537.9527 | roppe.com

5coLor

co

Lor

M100 black

M177 steel blue

M150 dark gray

M616platinum

M193black brown

M123charcoal

M114lunar dust

M129dolphin

M178 pewter

M194burnt umber

M148steel gray

M175slate

M174smoke

M197iceberg

M110brown

M147light brown

M619java

M181russet

M182toffee

M623nutmeg

M624chameleon

M140fawn

M191camel

M125fi g

M171 sandstone

M130 buckskin

M198 ivory

M632 fl ax

M184 almond

M170 white

M131 bisque

M629 golden

M127 harvest yellow

M631 sahara

M622 brass

M625 bronze

M124 taupe

M122 natural

M633 gingko

M628 shamrock

M195 light gray

M116 moss

M634 olive

M630 pine

M113 pistachio

M160 forest green

M118 peacock

M169 hunter green

M146 turquoise

M606 tropical blue

M187 blue

M154 salem blue

M165 colonial blue

M139 deep navy

M627 mariner

M618 aubergine

M621 merlin

M620 plum

M185 burgundy

M137 cinnabar

M186 red

M613 azalea

M615 cream

M626 tangerine

M617 terracotta

M188 brick

M120 tan

M133 golden honey

M167 spice

M161 snow

12

M a r B L e i z e d c o L o r s

1.800.537.9527 | roppe.com

6 coLor

z100 black

z177 steel blue

z150 dark gray

z616platinum

z193black brown

z123charcoal

z114lunar dust

z129dolphin

z178 pewter

z194burnt umber

z148steel gray

z175slate

z174smoke

z197iceberg

z110brown

z147light brown

z619java

z181russet

z182toffee

z623nutmeg

z624chameleon

z140fawn

z191camel

z125fi g

z171 sandstone

z130 buckskin

z198 ivory

z632 fl ax

z184 almond

z170 white

z131 bisque

z629 golden

z127 harvest yellow

z631 sahara

z622 brass

z625 bronze

z124 taupe

z122 natural

z633 gingko

z628 shamrock

z195 light gray

z116 moss

z634 olive

z630 pine

z113 pistachio

z160 forest green

z118 peacock

z169 hunter green

z146 turquoise

z606 tropical blue

z187 blue

z154 salem blue

z165 colonial blue

z139 deep navy

z627 mariner

z618 aubergine

z621 merlin

z620 plum

z185 burgundy

z137 cinnabar

z186 red

z613 azalea

z615 cream

z626 tangerine

z617 terracotta

z188 brick

z120 tan

z133 golden honey

z167 spice

z161 snow

s a f e t c o r K ®

1.800.537.9527 | roppe.com

7coLor

co

Lor

f i e s t a ®

f407tierra

f401 camello

f409oscuro

f414rojo

f413amarillo

f404niebla

f410marengo

f415morado

f412musgo

f416avahar

f408marron

f411fi el

s a f e t c o r K ® f i e s t a ®

zf407tierra

zf401 camello

zf409oscuro

zf414rojo

zf413amarillo

zf404niebla

zf410marengo

zf415morado

zf412musgo

zf416avahar

zf408marron

zf411fi el

s a f e t c o r K ® V i n Y L

z617 terracotta

z116moss

z631sahara

z137cinnabar

z150 dark gray

zw198white ivory

z198ivory

z194 burnt umber

z100black

z197 iceberg

z154 salem blue

z621merlin

z193 black brown

zw154white salem

blue

zw100white black

zw197white iceberg

1.800.537.9527 | roppe.com

8 coLor

see the fl ooring solutions you are envisioning.the new fl ooring designer program at roppe.com brings your design ideas to life.

choose your fl ooring and wall base, then choose the styles, profi les and colors, plus

experiment with custom color combinations you select. see them in a scene that's

similar to your installation environment, then receive color accurate prints of your

creations. it's your virtual design studio, right at your desktop.

save your designs and request samples from our floor scene program – full color 8"x 10" glossy photos of your intended designs that are environmentally friendly! floor scene photo options can also help narrow down the selections prior to ordering the lab submittal samples for your project – a more responsible choice!

select your fl ooring products along with the wall base style, and even sherwin Williams paint colors that work for the space that you are designing – remember you choose all of the options including profi les and colors! a great way to view custom color combinations too!

choose from the full tile scene – great for custom tile colors; the corner scene – show better detail of the wall base option; or the room scene where you can see your product selections in the environment of your choice – corporate, education, healthcare or hospitality!

click on the link for fl ooring designer at roppe.com

flooring designera t r o p p e . c o M

1.800.537.9527 | roppe.com

9fLoorinG desiGner

fLoo

rinG

desiG

ner

fl oorscore® certifi cation

floorscore® iaQ certifi cation means that a fl ooring product is independently certifi ed by scs to comply with the volatile organic compound emissions criteria of the california section 01350 program. any product that has met these stringent standards is a product that will contribute to good indoor air quality.

ecoeffects®

f r i e n d L Y f L o o r i n G p r o d u c t s

that means we’re not just

committed to making better

products – we’re dedicated

to making a positive impact

on the environment as well.

our “green” products meet

high environmental standards

and may contribute to the

u.s. Green Building council’s

Leed® Green Building

certifi cation system. from

tiles and treads to wall

base and adhesives, our

ecoeffects® products meet

these strict requirements

without compromising color

selection, performance,

durability or style.

At Roppe, we’ve consciously chosen to be part of the solution.

earning LEED® creditsLeed® is the cutting-edge system for certifying the world’s greenest buildings. ecoeffects® brand products may contribute to certifi cation credits for these Leed programs: nc (new construction) and ci (commercial interiors). products that meet the following qualifi cations are indicated throughout this literature.

Your link to roppe products and Leed® documentation.

for more information, please visit: www.roppe.com.

L e G e n d

the collaborative for high performance schoolsthe collaborative for High performance schools (cHps) believes that healthy, energy-effi cient learning environments promote positive educational experiences. Because roppe shares this philosophy, we’ve become a participating member in the cHps program, submitting our product line for emissions testing in accordance with their guidelines. the following products meet cHps criteria:

• pinnacle rubber Base, pinnacle plus Wall Base, BaseMates

®

stackable trim Molding system, rubber corner Blocks, 700 series Wall Base, Vinyl Base, Visuellé

®

Wall Base, alphaBase

®

• fiesta®

rubber tile & tread, safetcork®

fiesta®

tile & tread

• SafeTcork®

rubber tile & tread, safetcork®

Vinyl tile

• ESD Static Control Vinyl Tile

• Rubber Floor Tile, Spike/Skate Resistant Tile, designer’s choice

®

tile

• Recoil Fitness Flooring

• Tufl ex®

recycled rubber tile

• rubber stair tread, Vinyl stair tread

• rubber accessories, Vinyl accessories

• Select roppe adhesives

for a complete updated listing, please visit www.cHps.net.

Look for this symbol noting roppe’s ecoeffects® brand products.

MR 2 NC construction Waste Management

MR 4 NC/CI recycled content: 10%, 20% (post-consumer + 1/2 pre-consumer)

MR 5 NC/CI regional Materials: 10%, 20% manufactured regionally

MR 6 NC/CI rapidly renewable Materials

IEQ 4.1 NC/CI Low-emitting Materials: adhesives and sealants

IEQ 4.3 NC Low-emitting Materials: fl ooring systems

product is made in the usa.

1.800.537.9527 | roppe.com

10 ecoeffects

ecoeffects®

f r i e n d L Y f L o o r i n G p r o d u c t s

IMPACTRETHINK + REUSE + RECYCLE =

R E S P O N S I B I L I T Y

When choosing to update a fl oor that is nearing the end of its traditional life cycle, you can feel confi dent that roppe’s new recycling program meets your strictest requirements for sustainability by creating new and innovative products for the building industry.

the recycled rubber is chopped and cut into one of three primary products: soft rock for landscaping, safe rock for playgrounds or rubber crumb for athletic fi elds and other applications. the rubber can then be treated with a new-age epa approved adherent paint that is available in eight dazzling colors, or left unpainted for a colorful blend. the end product is a cost-effective rubber mulch that simultaneously promotes the environment and provides a beautiful, durable landscaping alternative or an eye-catching playground surfacing that is the cleanest and safest on the american market.

what products can be recycled?pinnacle rubber Base, alphaBase®, BaseMates®, pinnacle plus Wall Base, rubber corner Blocks, dimensions rubber tile, smooth and Marbleized rubber tile, raised design rubber tile and tread, safetcork® rubber tile and tread, fiesta® rubber tile and tread, designer’s choice® rubber tile, spike/skate resistant tile, esd rubber tile, recoil fitness flooring, tufl ex® recycled rubber tile and rubber accessories.

as our nation’s landfi lls continue to grow, at roppe we have done the research to fi nd new alternatives and uses for our products once they have exhausted their use in many of our oldest schools, healthcare and government facilities, churches, hotels, offi ce buildings and more!

pictured here are the new products that will be manufactured from your diverted landfi ll waste when you support our recycling program!

landscaping mulch edging fl ower beds

pavers playground surfacing t-rex cafe installation

rubber tile and tread, designer’s choicetile, spike/skate resistant tile, esd rubber tile, recoil fitness flooring, tufl ex recycled rubber tile and rubber accessories.

the recycled rubber is chopped

for landscaping, safe rock for playgrounds or rubber crumb for athletic fi elds and other applications. the rubber can then be treated with a new-age epa approved adherent paint that is available in eight dazzling

Base, rubber corner Blocks, dimensions rubber tile, smooth and Marbleized rubber tile, raised design rubber tile and tread, safetcork rubber tile and tread, fiestatread, designer’s choicetile, spike/skate resistant tile,

flooring, tufl extile and rubber accessories.

tread, designer’s choice® rubber tile, spike/skate resistant tile, esd rubber tile, recoil fitness

recycled rubber

rubber tile and

rubber

11ecoeffects

1.800.537.9527 | roppe.com

eco

effects / iM

pac

t

safetys p e c i a L s a f e t Y a p p L i c a t i o n s & c o d e c o M p L i a n c e

roppe safetMaX® soLutions:

non-skid rubber tile and tread products that reduce slip/fall incidences on fl oors and stairways.

alphaBase®, a pinnacle rubber Base featuring the ability to add safety signage where needed in schoolshospitals, dorms and public buildings.

safetcork® rubber tile and tread and Vinyl tile products developed for added visual appeal and the benefi t of slip resistance that increases 20% over the standard cof for rubber & vinyl fl ooring.

ada compliant rubber and Vinyl accessory transitions designed for minimal reaction as one travels from surface to surface.

esd static control Vinyl flooring promotes the reduction of static electricity in sensitive environmentssuch as clean rooms where the fi beroptic, electronic and pharmaceuticalitems are produced.

Metal treads feature an epoxy-fi lled face that increases slip resistance and meets ada guidelines when contrasting colors are selected.

roppe safeTmax® solutionssafetmax

®

is our brand to denote recommended products that promote increased safety in the environments where people learn, shop, recover from illness, work or live. increasing safety in an environment promotes a reduction in associated costs such as lost work hours, liability and decreased productivity.

complies with americans with disabilities act regulations.

Meets fl ammability requirements of the national fire protection association Life-safety code 101.

Meets building code standards from american national standards institute.

Meets photo-luminescent escape routing standards in din 67510.

Meets requirements of title 24 section 3306(r) of the disabled access regulations for the state of california.

Meets standards of american society for testing and Materials.

product is recyclable.

product is pVc free.

special safety applications and code complianceroppe products meet today’s stringent code requirements. Look for these symbols throughout this brochure for product compliance information.

L e G e n d

1.800.537.9527 | roppe.com

12 safetY coMpLiance

safetys p e c i a L s a f e t Y a p p L i c a t i o n s & c o d e c o M p L i a n c e

low profi le rubber tile and tread, safetcork® z137 cinnabar rubber risers, safetcork® z137 cinnabarpinnacle rubber base, 137 cinnabarrubber accessory #60, 137 cinnabarrop-cord recycled rubber tile, crimson

Meets standards of american society for testing and Materials.

product is recyclable.

product is pVc free.

special safety applications and code complianceroppe products meet today’s stringent code requirements. Look for these symbols throughout this brochure for product compliance information.

L e G e n d

13

1.800.537.9527 | roppe.com

13safetY coMpLiance

diM

ensio

ns

safetY

dimensions rubber tile colors page 4

co

Lor

s

diMensions ruBBer tiLefeatures and Benefits:

pVc free.

contains 10% natural rubber, a renewable resource, which may contribute to the Leed® Green Building certifi cation system and meets cHps criteria.

available in 3 profi les: crackle, random and stripe. designed for high durability and ease of maintenance throughout the product life cycle.

resists scuffi ng, gouging and cigarette scorching, as well as most chemicals and common substances.

provides underfoot comfort, reduced noise from foot traffi c and has an inherent slip resistance.

available in solid colors only. all colors available at a single price point.

all roppe rubber tiles combine functionalityand good looks.it’s naturally slip resistant and provides outstanding underfoot comfort

and noise reduction. Better yet, it’s easy to install and maintain. plus, it’s pVc free.

rubber tiled i M e n s i o n s

life cycle cost analysisindustry studies have shown that fl ooring materials with a higher initial cost do not necessarily translate to a higher cost in the long run. in fact, fi ndings indicate fl ooring materials with a higher initial cost will perform more cost effectively over many years. for example, while rubber fl ooring may cost more initially, the cost of maintaining it is lower. and because it’s extremely durable, it lasts a very long time. so, when examining long-term costs, it is important to consider the total cost of ownership. With the right information, you can help customers control costs – not just on the initial project, but also in the long run.

Initial installation

dimensions rubber tile 983 random pattern, 619 java

dimensions rubber tile 982 crackle pattern, 130 buckskin

source: How to Make Business Decisions for Facility Flooring suzanne r. Barnes, aia, cfM

RUBBER

INSTALLATION 7 1/2 YEARS 15 YEARS

$5$2

$5$7

$24

$16$13

$7$8

$25$27

$42

VCT

SHEET VINYL

CARPET– HIGH GRADE

1.800.537.9527 | roppe.com

14 use our online fLoorinG desiGner at roppe.comdiMensions

rubber tiled i M e n s i o n s

life cycle cost analysis

dimensions rubber tile 984 stripe profi le, 187 blue, 127 harvest yellow, and 146 turquoise pinnacle rubber base, 631 sahara

15sMootH | MarBLeized

1.800.537.9527 | roppe.com

diM

ensio

ns

raised design rubber tile colors page 4, 6

co

Lor

s

slip resistance is enhanced by the excellent water drainage provided by our raised design rubber tile.Liquids are safely channeled off the walking surface. it’s highly durable and pVc free,

and when compared to other types of fl ooring, rubber tile provides an unmatched

level of cost-to-life-cycle benefi t.

rubber tileraised desiGn ruBBer tiLe features and Benefits:

pVc free.


available in 7 profi les: slate design, Low profi le raised design, textured design, raised square design, raised circular Vantage profi le, Hammered and Warning tile design. designed for high durability and ease of maintenance throughout the product life cycle.



all colors available at a single price point.

r a i s e d d e s i G n

991 slate design

995 hammered design

996 raised circular

vantage design

lug-back vantage design, available only with

996 (above)

953 warning tile design

992 low profi le raised

circular design

993 textured design

994 raised square design

lug-back vantage designavailable in Vantage design only. our lug-back design allows for superior adhesion of the tile to the substrate to withstand extreme stress and shear loads from extra-heavy traffi c.

performance compounds> antifungal

> flame-retardant

> oil/Grease resistant

choose any of the added performance options you need. We can add to our rubber products the special performance compound of your choice to help you meet the challenges of any application or environment. compatible with all roppe rubber fl ooring colors and profi les.

slate design rubber tile custom logo, 100 black, 616 platinum, 123 charcoal, 170 white and a custom color

1.800.537.9527 | roppe.com

16 use our online fLoorinG desiGner at roppe.comraised desiGn

rubber tiler a i s e d d e s i G n

textured design rubber tile, 627 marinertextured design rubber stair tread, 627 marinerrubber risers, 627 mariner 17raised desiGn

1.800.537.9527 | roppe.com

raised

desiG

n

smooth rubber tile colors page 4

marbleized rubber tile colors page 6co

Lor

s

available in solid or marble color patterns, roppe smooth finish rubber tile is a great choice for healthcare, government or educational applications where rolling loads can be expected.custom fl ooring logos can bring a personal touch to corporate or educational

facilities adding visual interest while reinforcing brand identities.

sMootH finisH desiGn ruBBer tiLe features and Benefits:

pVc free.

contains 10% natural rubber, a newable resource, which may contribute to the Leed® Green Building ceretifi cation system and meets cHps criteria.

stands up well to constant traffi c from wheelchairs, shopping carts, luggage carriers or dollies and resists scuffi ng, gouging, cigarette scorching, most chemicals and common substances.

the most inexpensive, durable surface regarding length of life cycle and minimal maintenance.



s M o o t H | M a r B L e i z e d

rubber tile

choosing a marble fi nish over a solid fi nish provides added interest to any space while hiding minor dirt and debris.roppe offers you not only coordinating color lines across all product categories, but

improved color options in existing products such as our marble tile and tread that

can be ordered in all raised design tile and tread profi les except dimensions.

feature strips available in 1/2" x 24-1/2", 1" x 25" and 2" x 26", smooth or textured

patterns, can add drama to solid or marble fl oors.

smooth rubber tile, 186 redpinnacle rubber base, 186 red

smooth rubber tile, custom colors w/logo

1.800.537.9527 | roppe.com

18 use our online fLoorinG desiGner at roppe.comsMootH | MarBLeized

s M o o t H | M a r B L e i z e d

rubber tile

smooth rubber tile, marbleized M633 gingkopinnacle rubber base, 633 gingko 19sMootH | MarBLeized

1.800.537.9527 | roppe.com

sMo

otH

| Ma

rBeLized

safetcork rubber tile and tread colors page 7

co

Lor

s

the specially formulated blend of rubber and cork in our safetcork® slip resistant rubber tile & tread teams safety with a unique aesthetic appeal.the natural slip resistance of rubber combined with cork – a renewable resource –

makes it an ideal choice for education settings, churches, assisted living facilities and

multipurpose rooms.

safeTcork®

safetcorK ruBBer tiLe and tread features and Benefits:

pVc free.

contains 10% pre-consumer waste cork and 10% natural rubber, a renewableresource, which may contribute to the Leed® Green Building certifi cationsystem, and meets cHps criteria.

formulated from a unique combination of sBr rubber and cork.

cork content improves slip-resistance when wet by 20% under astM d-2047 (Modifi cation) test methods.

available in all rubber tile and tread profi les, and designed for high durability and ease of maintenance throughout the product life cycle.

choose from solid colors and fiesta® patterns. color is inherent throughout the product and available at a single price point.

s L i p r e s i s t a n t r u B B e r t i L e a n d t r e a d

s a f e t c o r K ® f i e s t a ® color combinationssafetcork® fi esta® name base color chips

zf401 camello 191 camel 170 white, 187 bluezf404 niebla 174 smoke 170 white, 187 bluezf407 tierra 194 burnt umber 130 buckskin, 170 whitezf408 marron 193 black brown 174 smoke, 198 ivoryzf409 oscuro 100 black 140 fawn, 150 dark grayzf410 marengo 150 dark gray 100 black, 170 whitezf411 fi el 165 colonial blue 130 buckskin, 170 whitezf412 musgo 116 moss 194 burnt umber, 198 ivoryzf413 amarillo 631 sahara 100 black, 170 whitezf414 rojo 137 cinnabar 140 fawn, 150 dark grayzf415 morado 621 merlin 100 black, 170 whitezf416 avahar 617 terracotta 194 burnt umber, 198 ivory

custom colors are available, minimum quantities may apply.

cork is the bark of the cork oak tree which has an average life span of 150-250 years.the cork is harvested in 9 year cycles. our cork is obtained as post-industrial waste from bottle cork manufacturers who grind the gaskets into the granules that are visible throughout the thickness of safetcork® rubber and Vinyl products.

zf409oscuro

zf404niebla

zf411fi el

zf415morado

zf416avahar

zf412musgo

zf408marron

zf407tierra

zf401 camello

zf410marengo

zf414rojo

zf413amarillo

1.800.537.9527 | roppe.com

20 use our online fLoorinG desiGner at roppe.comsafetcorK

safeTcork®

s L i p r e s i s t a n t r u B B e r t i L e a n d t r e a d

hammered design rubber treads w/ riser, safetcork® z622 brasshammered design rubber tile, safetcork® z622 brasspinnacle plus wall base profi le #95, 622 brass 21safetcorK

1.800.537.9527 | roppe.com

safetc

orK

fi esta rubber tile and tread colors page 8

co

Lor

s

a favorite of designers, fiesta® is not only long-lasting, it’s also great looking and an excellent choice for custom projects.fiesta® colors coordinate with other roppe products and can be mixed and matched

with tile, treads, wall base and accessories. Let your imagination be your guide with

beautiful, versatile and unique fiesta products.

fiesta®

fiesta ruBBer tiLe and tread features and Benefits:

pVc free.

contains 10% post-industrial waste and 10% natural rubber, a renewable resource, which may contribute to the Leed® Green Building certifi cationsystem, and meets cHps criteria.

colors coordinate with our other products, so you can mix and match with tile, tread, wall base and accessories. (custom colors are available; minimum quantities may apply.)

available in all rubber tile and tread profi les except dimensions.

unique fl ecked design helps hide dirt and debris between cleanings.


r u B B e r t i L e a n d t r e a d

We can help you make a school logo or corporate emblem part of your fl ooring design.our custom capabilities enable us to create logo

designs in a wide range of sizes and styles. We’ll

provide design suggestions and a complete plan

with cost estimates. chances are your school or

company colors are among our extensive range

of standard colors, but we can formulate custom

colors, too. custom fl ooring logos can be

created in most rubber and vinyl tile products.

color combinationsfi esta® name base color chips

f401 camello 191 camel 170 white, 187 bluef404 niebla 174 smoke 170 white, 187 bluef407 tierra 194 burnt umber 130 buckskin, 170 whitef408 marron 193 black brown 174 smoke, 198 ivoryf409 oscuro 100 black 140 fawn, 150 dark grayf410 marengo 150 dark gray 100 black, 170 whitef411 fi el 165 colonial blue 130 buckskin, 170 whitef412 musgo 116 moss 194 burnt umber, 198 ivoryf413 amarillo 631 sahara 100 black, 170 whitef414 rojo 137 cinnabar 140 fawn, 150 dark grayf415 morado 621 merlin 100 black, 170 whitef416 avahar 617 terracotta 194 burnt umber, 198 ivory

custom colors are available, minimum quantities may apply.

smooth rubber treads w/riser, fi esta® f416 avaharhammered profi le raised design rubber tile, fi esta® f416 avahar

textured design rubber tile, custom fi esta® color w/ logo

1.800.537.9527 | roppe.com

22 use our online fLoorinG desiGner at roppe.comfiesta

fiesta®

r u B B e r t i L e a n d t r e a d

hammered profi le raised design rubber tile, fi esta® f416 avahar with solid accent tiles in 187 blue 23fiesta

1.800.537.9527 | roppe.com

fiesta

designer's choice rubber tile colors page 4

co

Lor

s

the design possibilities are almost limitless with designer’s choice®.its 11 geometric shapes make it an attractive option for personalized fl ooring

applications, in spaces such as schools, retail areas, museums and more. use one of

our designs to make your fl ooring come alive, or create a unique look all your own

with durable and attractive designer’s choice®.

desiGner’s cHoice ruBBer tiLe features and Benefits:

pVc free.

contains 10% natural rubber, a renewable resource, which may contribute to the Leed® Green Building certifi cation system, and meets cHps criteria.

available in our wide selection of 11 shapes and 70 rubber tile colors for nearly limitless options.

Made of 1/8" solid rubber, textured, Hammered or smooth design rubber tile profi les only.

unique fl ooring system that adds design appeal with all of the benefi ts of rubber tile.


r u B B e r t i L e

designer’s choice®

an attractive and semi-custom approach to fl ooring that incorporates Hammered, smooth or textured design tile with 11 geometric shapes that can be used in one of our 6 standard patterns or mixed and matched to create your own unique design. a great option in fl ooring for schools, retail areas, museums and so much more!

matrix 100 nuevo 104striata 102 tuscany 105 optic 110 basketweave 111

d e s i G n e r ’ s c H o i c e ® s t a n d a r d p a t t e r n s

t H e 1 1 s H a p e s t H a t M a K e u p d e s i G n e r ’ s c H o i c e ®

12" x 12" 12" x 12"right hand

miter

6" x 18"picket

3" x 15" picket

3" x 15"righthand miter

3" x 15" left

hand miter

12" x 12" left

handmiter

6" x 6"9" x 9"6" x 12"

12" x 12"

19-11⁄16" x 19-11⁄16"

1.800.537.9527 | roppe.com

24 use our online fLoorinG desiGner at roppe.comdesiGner’s cHoice

r u B B e r t i L e

designer’s choice®

designer’s choice® 110 optic pattern, 130 buckskin w/ 198 ivory and 624 chameleonpinnacle plus wall base profi le #00, 624 chameleon 25desiGner’s cHoice

1.800.537.9527 | roppe.com

desiG

ner's c

Ho

ice

an ideal fl ooring for sporting and recreational areas, roppe spike/skate resistant tile stands up to wear and heavy use.use it anywhere damage from skates, spikes or cleats is a concern. its strength and

durability make it perfect for ice arenas, locker room entrances and exits, and players’

walkways to sports fi elds and ballparks.

spike/skatespiKe/sKate resistant tiLe features and Benefits:

pVc free.

contains 10% natural rubber, a renewable resource, which may contribute to the Leed® Green Building certifi cation system, and meets cHps criteria.

excellent wear resistance for high traffi c areas.

Made of 9mm solid rubber with a textured design profi le that resists scuffs, gouges, cuts, cigarette burns, and most chemicals and common substances.

the most inexpensive and durable surface regarding length of life cycle and minimal maintenance.

all 6 colors are available at a single price point: 100 Black, 139 deep navy, 160 forest Green, 150 dark Gray, 174 smoke and 191 camel.

r e s i s t a n t t i L e

100black

150dark gray

160forest green

174smoke

139deep navy

191camel

spike/skate resistant tile, 139 deep navy

1.800.537.9527 | roppe.com

26 use our online fLoorinG desiGner at roppe.comspiKe/sKate

spike/skater e s i s t a n t t i L e

metal treadsblack - BLK yellow – YLW blue – BLu brown – Brn red – red green – Grn gray – GrY

roppe Metal stair treads are ideal for installation over both commercial and residential steps and landings.

roppe MetaL tread features and Benefits:

constructed of heat-treated exterior-grade aluminum 6063t3, with an epoxy fi lled face that increases slip resistance and is resistant to marring, scratching and chipping.

Meets ada guidelines for the visually impaired when contrasting colors are selected.

factory pre-drilled and countersunk holes for a fl ush fi nish with mechanical fasteners.

stocked in 9" nominal depths and 36" and 48" lengths. nominal 7-1/2" and 11"depths available by special order.

neW! 7" plate and 4" nosings are also available.

available in 7 colorfast solid colors or two-color combinations. select from Black, red, Yellow, Green, Blue, Gray or Brown and are all available at a single price point. custom color matching is available and ideal to show off school or corporate branding colors.

metal treads, black w/ black

6.14"

7.00"0.22"

0.75"

4.00"

1.19

"

0.22"

1.02"

27

1.800.537.9527 | roppe.com

MetaL treads

yellow – YLW blue – BLu brown – Brn red – red green – Grn

roppe Metal stair treads are ideal for installation over both commercial and residential steps

14" 0.75"

co

Lor

s

Multi-functional rubber fl ooring designed for use in residential, commercial or industrial applications where added comfort under foot is needed.roppe recoil tiles can be used on indoor or outdoor applications where enhanced

walking comfort and slip resistance is desired. square and interlocking tiles are

36" x 36" and rolls are 48" x 49-1/2'. custom colors available upon request.

Minimum quantities may apply.

recoilrecoiL fitness fLoorinG features and Benefits:

pVc free.

contains post-industrial and post-consumer waste and may contribute to the Leed® Green Building certifi cation system and meets cHps criteria.

custom colors available upon request. Minimum quantities may apply.

outstanding sound and shock absorption.

stocking program allows for immediate shipment of our most popular styles and colors.

available in Black and Black with 7 standard roppe color chips: 131 Bisque, 169 Hunter Green, 186 red, 195 Light Gray, 198 ivory, 603 sunfl ower and 609 cobalt. NEW! Multi-color chip combinations now available in red/Bisque/cobalt; Bisque/ivory; Hunter Green/ivory; and cobalt/Light Gray. all color combinations available at our single price point.

f i t n e s s f L o o r i n G

recoil is available in standard thicknesses of 5/32", 1/4", 3/8" and 1/2".

recoil fi tness fl ooring, 131 bisque and 186 red (40% chip content)

swatches represent standard 10% chip content.

100 black 131 bisque

195 light gray

609 cobalt603 sunfl ower

169 hunter green

186 red 198 ivory

375 red/bisque/cobalt

377 hunter green/ivory

376 bisque/ivory 378 cobalt/light gray

1.800.537.9527 | roppe.com

28 use our online fLoorinG desiGner at roppe.comrecoiL

recoilf i t n e s s f L o o r i n G

recoil fi tness fl ooring, 195 light gray (10% chip content) 29recoiL

1.800.537.9527 | roppe.com

reco

iL

tufl ex® recycled rubber flooring tiles for sports and commercial applications have been proven in the industry since 1957.tufl ex® tiles are manufactured with a patented vulcanization process using

predominantly recycled rubber. square and interlocking tiles are 27"x 27" x 3/8" thick.

tuflex®

tufLeX recYcLed ruBBer tiLe features and Benefits:

pVc free 27" x 27" tufl ex rubber tiles are manufactured at 3/8" gauge (square or interlocking edges) using a patented process of simultaneous vulcanization of two recycled rubber components into one solid product.

contains 85%-95% post-consumer waste, which may contribute to the Leed® Green Building certifi cation system, and meets cHps criteria.

safety – exceeds osHa and ada standards for excellent traction and durability.

non-porous surface provides an excellent barrier to soil, spills, stains and odors.

resilient anti-fatigue surface that is excellent for free weight/workout machine applications as well as rinks and animal care clinics.

the fl ooring choice for professional sports facilities that house the nfL, nHL, MLB, and nBa. combine custom logo capabilities, and you have the most complete answer for your sports or commercial fl ooring needs.

r e c Y c L e d r u B B e r t i L e

t u f L e X ® s p o r t s f L o o r i n G | t i t a n9 5 % p o s t - c o n s u M e r W a s t e

849ebony

950confetti

978pacifi c

977natural

976hunter

982taupe

970crimson

935snowfall

934rouge

758pecan

932cocoa

901adobe

911seabreeze

936dusk

916ash

971moss

933oceania

913charcoal

031fi esta

931desert

t u f L e X ® s p o r t s f L o o r i n G | s p a r t u s8 5 % p o s t - c o n s u M e r W a s t e

f e at u r e s t r i p s

dark blue

black

brown

gray

beige

1.800.537.9527 | roppe.com

30 use our online fLoorinG desiGner at roppe.comtufLeX

tuflex®


tufl ex® spartus recycled rubber tile, 913 charcoal tufl ex® titan recycled rubber tile, 950 confetti w/ custom feature strips and logo 31tufLeX

1.800.537.9527 | roppe.com

tufLeX

Versatility and functionality are inherent throughout our line of rop-cord® fl ooring.tough and durable as well as environmentally friendly, it can be used indoors or

outdoors. rop-cord®‘s built-in anti-slip feature makes it practical for a variety of areas,

including damp or wet spaces. so, it’s an ideal fl ooring for ramps, walk-off mats,

concourses and foyers – anywhere moisture might pose a hazard to pedestrians.

rop-cord ®

rop-cord recYcLed ruBBer tiLefeatures and Benefits:

Mother nature-friendly and recyclable, made with 90% post-consumer waste from tires, which may contribute to the Leed® Green Building certifi cation system.

Lifetime delamination warranty.

nominal 5/16" thick vulcanized backing and nominal 3/8" thick non-vulcanized backed modular tile allows diverse patterns in 12" x 12" tiles and 12" x 30' rolls.

easy maintenance – just vacuum and spot clean as needed. outdoor applications can be hosed off and left to dry.

Meets ada recommendations for ramps.

4 color options: pine, crimson, indigo and earthtone.

note: When exposed to direct sunlight and other elements, discoloration will occur.


pine indigo crimson earthtone

low profi le rubber tile, safetcork® 137 cinnabar pinnacle rubber base, 137 cinnabarrubber accessory #60, 137 cinnabarrop-cord recycled rubber tile, crimson

1.800.537.9527 | roppe.com

32 use our online fLoorinG desiGner at roppe.comrop-cord

rop-cord ®


rop-cord® recycled rubber tile, earthtone 33rop-cord

1.800.537.9527 | roppe.com

rop-c

ord

roppe static dissipative rubber tiles dissipate static electricity in areas where static electrical discharge presents a hazard to sensitive devices, while helping to control static charges generated by the human body.our specialized and unique manufacturing process gives our esd rubber the qualities

that make it pVc free, durable, practical and economical. a combination of dissipative

tile and proper conductive footwear keeps body voltage less than 50 volts.

esd rubberesd static controL ruBBer tiLefeatures and Benefits:

pVc free.

contains 6% pre-consumer waste which may contribute to the Leed®

Green Building certifi cation system, and meets cHps criteria.

10-year dissipative warranty incorporated into the compound that also contains built-in antimicrobial agents that inhibit bacteria and fungi and meet the astM G-21.

Meets or exceeds all esd control standards when tested by astM f 150, nfpa 99, ansi/esd s7.1 – 2005 and uL 779.

available in .080 gauge Hammered profi le 24" x 24" tiles that are low maintenance and require no waxing.

available in the same 12-color palette as our standard fiesta rubber tile, at a single price point.

s t a t i c c o n t r o L t i L e

e s d c o L o r s

ensure proper fi t, fi nish and appearance by using rubber welding bead.use roppe welding beads in areas that require ongoing and

comprehensive wet cleaning such as operating rooms or

laboratories, and clean rooms where particulate entrapment

may occur.

f407tierra

f401 camello

f409oscuro

f414rojo

f413amarillo

f404niebla

f410marengo

f415morado

f412musgo

f416avahar

f408marron

f411fi el

rubber welding bead colors

617 terracotta

631 sahara

116 moss

197 iceberg

194 burnt umber

137 cinnabar

150 dark gray

193 black brown

100 black

621 merlin

198 ivory

154 salem blue

fractional sizes available to accommodate access panel construction.

1.800.537.9527 | roppe.com

34 use our online fLoorinG desiGner at roppe.comesd ruBBer

esd rubbers t a t i c c o n t r o L t i L e

esd static control rubber tile, f411 fi elwelding bead, 150 dark gray

1.800.537.9527 | roppe.com

35esd ruBBer

1.800.537.9527 | roppe.com

esd ru

BB

er

roppe’s northern timbers harmonize nature’s best fl ooring options with today’s technology to create beautiful fl oors that are environmentally friendly and fully recyclable. northern timbers offer timeless grains and hues that complement

many design styles and textures.

Wood VinYL pLanKfeatures and Benefits:

premium construction offers a 10-year limited wear warranty.

contains 50% recycled content, 20% pre-consumer & 30% post-consumer waste, which may contribute to the Leed® Green Building certifi cation system.

28 mil (.711mm) wear layer that exceeds astM f-1700 spec for commercial use. uV cured ceramic bead fi nish adds durability while resisting scratching, wear and indentation.

nominal 1/8" construction on glue down and 3/16" loose-lay construction helps conceal subfl oor imperfections and allows for fl ush installation with other 1/8" and 3/16" products.

available in 18 colors/grains of 4" x 36" glue down planks; 8 colors/grains of 6" x 48" loose-lay planks with a straight edge.

all colors/grains available at a single price point.

p r e M i u M V i n Y L W o o d p L a n K

plus, enjoy the ease of installation

with northern timbers new fl oating

fl oor option. available in 8 of the most

popular grains and a 6" wide plank

that makes a grand statement with an

increased installation effi ciency.

northern timbers

029 toasted teak

024 golden oak

040 limed gray oak

026 gingered beech

041 cocoa pine

027 tigereye zebra

042 voodoo beech

035 bronzed oak

021 sandy pine

038 limed red oak

023 antique oak

039 weathered pine

030 spicy cherry

034 tanned zebra

020pale maple

032 copper hickory

028 persimmon cherry

n o r t H e r n t i M B e r sp r e M i u M V i n Y L W o o d p L a n K

037 ash walnut

Loose-LaY option aVaiLaBLeL

loose-lay option

1.800.537.9527 | roppe.com

36 use our online fLoorinG desiGner at roppe.comnortHern tiMBers

loose-lay option

p r e M i u M V i n Y L W o o d p L a n K

northern timbers

northen timbers premium vinyl wood plank, 039 weathered pine37nortHern tiMBers

1.800.537.9527 | roppe.com

no

rtHern

tiMB

ers

enjoy the look of expensive leather fl ooring with added durability and ease of maintenance by choosing roppe’s northern Leathers vinyl tiles.environmentally friendly and fully recyclable, northern Leathers offer a unique

subtle texture and 6 great colors that compliment today’s palette.

LeatHer VinYL tiLefeatures and Benefits:

premium construction offers a 10-year limited wear warranty.

contains 50% recycled content, 20% pre-consumer & 30% post-consumer waste, which may contribute to the Leed® Green Building certifi cation system.

28 mil wear layer that exceeds astM f-1700 spec for commercial use. uV cured ceramic bead fi nish adds durability while resisting scratching, wear and indentation.

nominal 1/8" construction helps conceal subfl oor imperfections and allows for fl ush installation with other 1/8" products.

available in 6 colors of 18" x 18" glue down tiles with a straight edge.


p r e M i u M V i n Y L L e a t H e r t i L e

northern leathers

055clay

051gunmetal

PU coating

Northern Leathers and Northern Timbers (see page 36) products feature a multilayered construction.

wear layer

print fi lm

core sheet

core sheet

balance sheet

053 java

056amber

050ebony

054auburn

n o r t H e r n L e a t H e r sp r e M i u M V i n Y L L e a t H e r t i L e

1.800.537.9527 | roppe.com

38 use our online fLoorinG desiGner at roppe.comnortHern LeatHers

p r e M i u M V i n Y L L e a t H e r t i L e

northern leathers

northern leathers premium vinyl leather tile, 054 auburn39nortHern LeatHers

1.800.537.9527 | roppe.com

no

rtHern

LeatH

ers

When it comes to the natural look of real wood, nothing tops our north coast collection® of Wood naturals™.roppe’s industry-leading wear layer ensures the fl oor will maintain its

original beauty – to stand the test of time.

wood naturalsTM

Wood naturaLs soLid VinYL tiLefeatures and Benefits:

superior performance of 100% pure vinyl and a 10-year limited wear warranty.

contains 10% post-industrial waste, which may contribute to the Leed® Green Building certifi cation system.

40 mil 0.040" wear layer exceeds spec for commercial use by 100%. durable and resistant to wear, indentations, delamination and shrinking.

full 1/8" construction helps conceal subfl oor imperfections and allows for fl ush installation with other 1/8" products.

available in 3" x 36" planks or 12" x 12" and 18" x 18" tile with a straight or beveled edge.

all colors/grains available at a single price point.

s o L i d V i n Y L t i L e

001tacoma cherry

008newport maple

012caramel ash

010antique walnut

013burnt pecan

011golden maple

014warm cherry

002heritage walnut

004bainbridge oak

005vantage oak

006camden oak

007greenwich maple

Wood naturals are available in a variety of styles, from

cherry, walnut and oak to maple, ash and pecan.

Wood naturals emulate the warmth and feel of real-wood fl ooring, without all the hassle of real-wood maintenance.

wood naturalstM solid vinyl tile, 007 greenwich maple and 001 tacoma cherry

1.800.537.9527 | roppe.com

40 use our online fLoorinG desiGner at roppe.comWood naturaLs

wood naturalsTM


wood naturalstM solid vinyl tile, 007 greenwich maple and 001 tacoma cherry

1.800.537.9527 | roppe.com

41Wood naturaLs

Wo

od

na

tura

Ls

safetcork® solid vinyl tile is durable, versatile and easy to maintain, and comes with the natural slip resistance of cork, now with options!choose from any of the standard 12 colors on a white background – in any

combination of 1, 2 or 3 chip colors – and create your own tile. What else could be

better than limitless options?

safeTcork®

safetcorK soLid VinYL tiLe features and Benefits:

contains 10% pre-consumer waste cork and 2% epoxidized soybean oil, a renewable resource which may contribute to the Leed® Green Building certifi cation system, and meets cHps criteria.

cork content improves the slip resistance under astM d-2047 (Modifi cation) test methods, while built-in antimicrobial agents inhibit mold and mildew and meet astM G-21.

Withstands heavy equipment loads without permanent indentation, even under rolling load conditions up to 2,000 psi.

available in .080” thick 12" x 12" and pre-grooved, heat weld 24" x 24" or 36" x 36" tiles for seamless installation with matching vinyl welding beads.

flexible enough to self-cove during installation but can withstand extreme rolling loads up to 2,000 psi.

color is inherent throughout the tile thickness and available at a single price point.


24" x 24" and 36" x 36" available pre-grooved for heat weldable installations.

vinyl welding bead colors

617 terracotta

631 sahara

116 moss

197 iceberg

194 burnt umber

137 cinnabar

150 dark gray

193 black brown

100 black

621 merlin

198 ivory

154 salem blue

safetcork® Vinyl tile is great for

installations that require minimal

maintenance requirements as it easily buffs

to a shine with no fi nishes required! it’s

also colorful, stylish and available in some

coordinating white marble designs.

z617 terracotta

z116moss

z631sahara

z137cinnabar

z150 dark gray

zw198white ivory

z198ivory

z194 burnt umber

z100black

z197 iceberg

zw154white salem blue

z154 salem blue

z621merlin

z193 black brown

zw100white black

zw197white iceberg

1.800.537.9527 | roppe.com

42 use our online fLoorinG desiGner at roppe.comsafetcorK

safeTcork®


safetcork® solid vinyl tile, z631 saharasafetcork® solid vinyl tile, options w/ z631 sahara, z617 terracotta and z193 black brownpinnacle plus wall base profi le #25, 631 sahara

1.800.537.9527 | roppe.com

43safetcorK

safetc

orK

We offer welding beads in a wide variety of colors to ensure proper fi t, fi nish and appearance. ideal for use in the installation of vinyl tile, our welding beads provide a seamless bond that meets the most exacting requirements for sanitation.use roppe welding beads in areas that require ongoing and comprehensive wet cleaning, such as operating rooms, laboratories, clean rooms or any other areas where maintaining proper hygiene is essential.

esd static control vinyl fl ooring is ideal for clean rooms and computer rooms, for fi ber optic, electronic and pharmaceutical manufacturing, and anywhere protection from static discharge is needed.our specialized and unique manufacturing process gives our esd the qualities that

make it durable, practical and economical. combination of conductive tile and proper

conductive footware keeps body voltage less than 8 volts.

esd vinylesd static controL VinYL tiLefeatures and Benefits:

contains 2% epoxidized soybean oil, a renewable resource, which may contribute to the Leed® Green Building certifi cation system, and meets cHps criteria.

High luster surface eliminates need for fl oor fi nishing – easily buffs to a shine and resists effects of common chemicals and solder.

Withstands heavy equipment loads without permanent indentation, even under rolling load conditions up to 2,000 psi.

Lifetime conductivity warranty. provides permanent conductive properties. 10-year limited wear warranty.

Meets or exceeds all esd standards by astM f-150, nfpa 99 and ansi/esd s7.1 – 2005.


s t a t i c c o n t r o L t i L e

e s d c o L o r s

756thunder black

757tornado gray

760safety yellow

750cumulus white

751haze gray

753stratus blue

754storm beige

701neutron

702electron

Colonial Blue 165

Smoke 174

Iceberg 197

Snow 161

Natural 122

Ivory 198

Sandstone 171

Safety Yellow 760

Thunder Black 756

Tornado Gray 757

We offer welding beads in a wide variety of colors to ensure proper fi t, fi nish and appearance.use roppe welding beads in areas that require ongoing and

comprehensive wet cleaning, such as operating rooms,

laboratories, clean rooms or any other areas where maintaining

proper hygiene is essential.24" x 24" and 36" x 36" tiles available pre-grooved for heat weldable installations.

1.800.537.9527 | roppe.com

44 use our online fLoorinG desiGner at roppe.comesd VinYL

esd vinyls t a t i c c o n t r o L t i L e

esd static control vinyl tile, 701 neutronwelding bead, 174 smoke

1.800.537.9527 | roppe.com

45esd VinYL

esd V

inYL

rubber stair tread colors page 4

co

Lor

s

our line of pVc free rubber stair treads is the perfect complement to fl ooring projectsin shopping malls, retail settings, government centers, hospitals and airports. Most

styles offer ada nose-compliant features. Better yet, they coordinate with our other

tile designs and colors.

treadruBBer stair treads features and Benefits:

pVc free.

contains 10% natural rubber, a renew-able resource which may contribute to the Leed® Green Building certifi cation system, and meets cHps criteria.

available in 9 profi les: textured, raised circular Vantage, raised square, Low profi le raised circular, abrasive strip, rib, smooth, diamond and Hammered design profi les. note: custom lengths can be ordered in 6" increments up to 9 ft. in textured, Vantage and diamond designs.

safety abrasive strips standard on some product lines. ribbed rubber inserts and custom strips also can be added for extra traction or to aid the visually impaired. available with self-illuminating abrasive glow strips for added safety in darkened conditions.

treads fully conform with astM f-2169, type ts and can be added with the added performance compounds: antifungal, flame-retardant or oil/Grease resistant.

available in all rubber tile colors and fiesta color options that are inherent throughout the thickness of the tread and available at a single price point.

r u B B e r : r a i s e d d e s i G n t r e a d s |s p e c i a L t Y r u B B e r t r e a d s

performance compounds > antifungal

> flame-retardant

> oil/Grease resistant

choose any of the added performance options you need. We can add to our rubber products the special performance compound of your choice to help you meet the challenges of any application or environment. compatible with all roppe rubber fl ooring colors and designs.

as easy to install as they are to maintain, our rubber stair treads are available in the same designer colors as roppe tile and wall base and come in a large selection of fi nishes, textures and gauges, including our popular roppe raised design profi les.

easy

#96 vantage profi le w/riser, 191 camel#996 vantage design tile, 191 camel

1.800.537.9527 | roppe.com

46 use our online fLoorinG desiGner at roppe.comruBBer stair treads

treadr u B B e r : r a i s e d d e s i G n t r e a d s |s p e c i a L t Y r u B B e r t r e a d s

square design rubber tread*, custom colorsquare design rubber tile, custom color* 2” abrasive strip, pebble white added 47ruBBer stair treads

1.800.537.9527 | roppe.com

ruB

Ber sta

ir tread

s

rubber stair tread colors page 4

co

Lor

s

r u B B e r : r a i s e d d e s i G n t r e a d s | s p e c i a L t Y r u B B e r t r e a d s

tread9-foot stair treadsif you have a stairway that’s

oversized – with steps more

than 72" (1.83m) wide –

roppe now offers three

of our most popular tread

profi les; textured, raised

circular Vantage, (with and

w/out riser) and diamond

designs, in a 9 ft. (2.73m)

tread. the same colors as

our standard stair treads

are available, and matching

7" (177.8mm) risers are

available as well. Vinyl

treads can be special

ordered to 9 ft. lengths

(minimum quantities apply).

raised circular vantage design #96 with riser

and #98 without riser*

#92 low profi le raised circular design*

#95 hammered design with riser*

#93 textured design*

#40/#41 heavy duty; #50/#51 light duty

abrasive strip design

#97 15" extended depth vantage design*

#30 and #31 diamond design*

#94 raised square design*

#60/#61 heavy duty; #70/#71 light duty

smooth design*

#80 and #81 rib design*

* abrasive strips can be added to rubber treads #30/31, #60/61, #80/#81, #92, #93, #94, #95, #96, #97 and #98.

diamond design rubber stair tread, marbleized M633 gingkorubber riser, marbleized M633 gingkopinnacle rubber base, 633 gingko

1.800.537.9527 | roppe.com

48 use our online fLoorinG desiGner at roppe.comruBBer stair treads

r u B B e r : r a i s e d d e s i G n t r e a d s | s p e c i a L t Y r u B B e r t r e a d s

tread| ruBBer and VinYL risers |

risers cover the rear edge of tread to eliminate labor-intensive hand trimming. they are sized to fi t most stair risers, but can be trimmed to fi t any height (7"or less) or length. note: 9 ft. (2.73m) risers are available for rubber treads #30 diamond design, #93 textured design, #96 and #98 Vantage profi le designs.

note: rubber warning tiles also can be used to alert the visually impaired to approaching stair-ways. size: 1/8" gauge, 12" x 12". in addition, all roppe tiles can be used on landings.diamond and smooth landing mats are also available 27" x 27".

| ruBBer LandinG Mats/tiLes |

stringers are available in 10" x 50' vinyl and 10" x 72" or 12" x 72" rubber, and in all of the colors in coordinating tread lines at a single price point.

| ruBBer and VinYL strinGers |

relief cutMany of our treads include a molded relief cut that aids in the installation of our treads on today’s angled stairs.

tapered noseMany roppe treads have a tapered nose for a clean fi t. they help reduce tripping hazards while providing a better fi nished look.

60°

90°

safety yellow

black

pebble white

ocean gray

teak brown

beige

galley red

glow strip

rubber and vinyl treads for the visually impaireddesigned to improve safety

for the visually impaired,

roppe stair treads are

available with grit strips

and in contrasting colors. in

addition, rubber detectable

warning tiles help signal

changes in elevation.

vantage raised design rubber tread w/o riser*, 194 burnt umberraised design warning tile, 194 burnt umberrubber riser, 194 burnt umber* 2" abrasive strip, safety yellow

* abrasive strips or ribbed rubber inserts can be added to rubber treads:#30, #31, #80, #81, #92, #93, #94, #95, #96, #97 and #98.

ruBBer inserts

ribbed rubber inserts for rubber or vinyl stair tread

lines provide a tactile surface that’s durable and easy

to clean. the low-profi le ribbed surface, or smooth

option, is available in 2" strips and offered in colors

that coordinate with many of our other product lines.

LL – Safety Yellow

AL – Almond

KK – Black

MG – Dark Gray

TT – Brown

1.800.537.9527 | roppe.com

49ruBBer stair treads

ruB

Ber sta

ir tread

s

our vinyl stair tread designs combine the best of two worlds – affordability and durability –without sacrifi cing the good looks and quality you’ve come to expect from roppe

products. With many colors and designer styles to pick from, you’ll fi nd the perfect

complement for your stair tread project.

treadVinYL stair treads features and Benefits:

available in two new designer styles and 42", 48" and 72" lengths.

contains 2% epoxidized soybean oil, a renewable resource and 10% pre-consumer waste, which may contribute to the Leed® Green Building certifi cation system, and meets cHps criteria.

Landing tiles and mats, risers and stringers available.

abrasive strips and ribbed or smooth rubber inserts can be added to all styles.

color line is consistent with the ready Base line of wall base that can be specifi ed on budget conscience jobs.

dedicated color line of 15 colors that are inherent throughout thickness of the tread and available at a single price point.

V i n Y L t r e a d

Vinyl stringers make installation easier by eliminating time consuming hand trimming and fi tting. Vinyl risers help provide a professional fi nish. Both products are available in the same colors as our vinyl stair treads at a single price point.

simple

100black

117saddle brown

107light khaki

171sandstone

172champagne

184almond

187blue

168deep water

177steel blue

132granite

195light gray

182toffee

175slate

178pewter

147light brown

light-duty vinyl tread, 177 steel bluevinyl riser, 177 steel blue

1.800.537.9527 | roppe.com

50 use our online fLoorinG desiGner at roppe.comVinYL stair treads

treadV i n Y L t r e a d

heavy-duty vinyl tread, 172 champagnevinyl riser, 172 champagne 51VinYL stair treads

1.800.537.9527 | roppe.com

Vin

YL stair trea

ds

pinnacle rubber base colors page 4

alphabase colors page 4co

Lor

s

pinnacLe ruBBer Base features and Benefits:

pVc free.


the widest range of sizes available: 2-1/2", 3", 3-1/2", 4", 4-1/2", 5", 5-1/2" and 6". profi le options in standard 4" include cove, no toe, butt toe, long toe (1") and sanitary base (2").

Maintains a smooth and attractive appearance. Will not shrink, gap or separate from the wall.

neW! roppe rubber corner Blocks and Micro corners are recommended. inside and outside profi les available.

all colors inherent throughout and available at a single price point.

no matter what the project, 100% pVc free roppe pinnacle rubber base is ideal for the job.pinnacle is the professional’s choice, because this

sBr rubber base is highly durable and extremely

fl exible, allowing for easy installation around columns,

corners and architectural curves.

r u B B e r B a s e

pinnacle

When the project calls for signage combined with a durable sBr base, roppe has the answer in alphaBase wall base products.ideal for safety applications, such as hallways and

stairwells – anywhere clearly marked signage is a

necessity – alphaBase is an ideal choice for schools,

hospitals, dorms and public buildings. safety signage

is standard, but custom signage is also available.

alphabase

1.800.537.9527 | roppe.com

52 use our online fLoorinG desiGner at roppe.compinnacLe | aLpHaBase

r u B B e r B a s e

pinnacle

pinnacle rubber base, 186 red

1.800.537.9527 | roppe.com

53pinnacLe | aLpHaBase

1.800.537.9527 | roppe.com

pinn

ac

Le

basemates colors page 4

co

Lor

s

attention to detail can certainly help transform a room. that’s why sculpted wall base designs are so popular in today’s high-end projects.

and now there’s a new option for designers and installers on tighter budgets. With the

patent-pending roppe BaseMates® stackable trim molding system, you can transform

ordinary wall base into something special – by adding a custom look at a minimal cost.

basemates®

BaseMates stacKaBLe triM MoLdinG sYsteMfeatures and Benefits:

pVc free.


stacking multiple layers of top trims allows height and design versatility in matching, complementary or contrasting color themes.

available in four 1-1/8" shoe base profi les, four 3/4" and seven 1-3/4" sculptured top trims.


all colors are inherent throughout and available at a single price point.

s t a c K a B L e t r i M M o L d i n G s Y s t e M

C22 Top Trim 1-3/4"

packaged 120' per carton

C2O Top Trim 1-3/4"


CO2 Top Trim 1-3/4"


C21 Top Trim 1-3/4"


C23 Top Trim 1-3/4"


BO1 Top Trim 3/4"


BO2 Top Trim 3/4"

packaged 120' per cartonBOO Top Trim 3/4"


BO3 Top Trim 3/4"


CO1 Top Trim 1-3/4"


COO Top Trim 1-3/4"

packaged 120’ per carton

top trims

AOO Base Shoe 1-1/8"


AO1 Base Shoe 1-1/8"






base shoesMake ordinary wall base, extraordinary! roppe’s new patent-pending wall base system allows you to create your own designs using as few or as many of the 15 components as you choose, or simply extend the life of existing wall base by adding a top trim to hide unsightly paint lines.

1.800.537.9527 | roppe.com

54 use our online fLoorinG desiGner at roppe.comBaseMates

basemates®

s t a c K a B L e t r i M M o L d i n G s Y s t e M

basemates® profi le c21, 623 nutmegbasemates® base shoe a01, 623 nutmeg2-1/2” pinnacle rubber base no-toe, 623 nutmeg rubber corner blocks, 623 nutmegsmooth rubber tile, marbleized M623 nutmeg 55BaseMates

1.800.537.9527 | roppe.com

Ba

seMa

tes

pinnacle plus colors page 4

co

Lor

s

the architectural lines of pinnacle plus wall base reveal roppe’s keen attention to detail. formulated with all of the same features and benefi ts that make pinnacle rubber

base the professional’s choice, pinnacle plus base gives the industry unique profi les

and new options in design.

pinnacle plus

pinnacLe pLus WaLL Basefeatures and Benefits:

pVc free.


available in 15 profi les that range in heights from 2-1/2" to 5-5/8".

inexpensive upgrade to standard wall base that adds visual appeal to any design.


all colors are inherent throughout and available at a single price point.

W a L L B a s e

#10

profi le height 4"packaged 60' per coil 1/8" thickness

#15

profi le height 5-1/4"packaged 60' per coil1/8" thickness

#20

profi le height 4"packaged 120' per coil1/8" thickness

#30


#90


#95


#00


#35


#25


#85

profi le height 4-1/4"packaged 60' per coil1/4' thickness

#05


#50


profi le height 5-5/8"packaged 48' per ctn.3/8" thickness

#55

#65

profi le height 4-5/8"packaged 48' per ctn.3/8" thickness

#75

profi le height 3"packaged 48' per ctn.3/8" thickness

rubber corner blocksrubber corner blocks

outside corner inside corner outside corner

micro corners

outside cornerinside corner

1.800.537.9527 | roppe.com

56 use our online fLoorinG desiGner at roppe.compinnacLe pLus | corners

the dreaded corner – it’s often viewed as the most diffi cult, costly and time-intensive element of any wall base installation.to resolve this issue, we’ve developed

rubber corner blocks. these 100% pVc

free, vulcanized and extruded corner

blocks alleviate costly hand-scribing,

wasted time and extra skilled craftsmen

from the corner-forming process. these

rubber corners also add durability because

they are less likely to get damaged

or detached during everyday use and

maintenance of the interior space.

corners

pinnacle plusW a L L B a s e

pinnacle plus wall base profi le #55, 174 smokerubber corner blocks, 174 smokerop-cord® recycled rubber tile, indigo 57pinnacLe pLus | corners

1.800.537.9527 | roppe.com

pinn

ac

Le pLus

visuellé wall base colors page 4

co

Lor

s

visuellé®

VisueLLÉ WaLL Basefeatures and Benefits:

durable tpr rubber sculpted product produced in 40' rolls that reduce joints for a seamless installation.

available in a dynamic 7-3/4" height, designed to complement the very popular, original 4-1/2" profi le.

provides the look of custom-crafted woodwork, eliminating the nailing, sanding and priming associated with wood.

natural fl exibility conceals irregularities in fl oors, walls and corners (e.g., seam of fl oor and wall, bowing walls, etc.), and allows for installation around architectural curves.

neW! roppe rubber corner Blocks are recommended. inside and outside profi les available.


W a L L B a s e

our Visuellé® Wall Base solutions system gives you even more fl exibility.Visuellé® is available in two profi le heights and, with our industry-leading 40 ft. rolls,

offers elegant style and seamless installations. rubber corner blocks and mitered

corners – pre-cut to fi t a 90° cut of Visuellé wall base – make installations easier than

ever, saving time and money on the job site. choose from a range of 30 colors plus

white, for a beautiful fi nish.

visuellé® wall base, 624 marinertextured design rubber tile, 127 harvest yellow textured design rubber tile, 632 fl ax

1.800.537.9527 | roppe.com

58 use our online fLoorinG desiGner at roppe.comVisueLLÉ


outside corneroutside cornerinside corner

visuellé® mitered corners

designed to set the standard for simplicity and effi ciency.Gone are the days of adding labor costs to

cut or form corners at the jobsite. Gone too

are the days when complaints were fi led

because the base and corner product do

not match. roppe rubber corner Blocks

and Visuellé mitered corners eliminate all

of those added costs by providing a great

corner solution that works right every time

and installs in minutes with standard tools.

recommended height for corner blocks is

1/4" taller than the wall base.

simplicity

visuellé®

W a L L B a s e

visuelle® wall base, 175 slaterubber corner blocks, 175 slateslate design rubber tile, 175 slate

1.800.537.9527 | roppe.com

59VisueLLÉ

1.800.537.9527 | roppe.com

Visu

eLLÉ

700 series wall base colors page 4

vinyl base colors page 4co

Lor

s

easier to work with and providing more fl exibility than vinyl base products, roppe’s unique blend of thermoplastic

rubber and vinyl makes the 700 series an attractive and economical choice for a variety

of applications. With its moderate pricing and beautiful color palette, our 700 series wall

base is an outstanding selection for any installation.

700 series700 series WaLL Base features and Benefits:

tpr rubber compound resists scratches and abrasions, and won’t fade, crack or chip.

contains 10% pre-consumer waste, which may contribute to the Leed® Green Building certifi cation system and meets cHps criteria.

Moderate fl exibility due to its rubber/vinyl mix.

thickness of 1/8" helps hide wall irregularities.

ribbed back for positive adhesion and top-lip design that helps base fi t tightly against wall.


W a L L B a s e

Low cost and good looks highlight roppe’s type tV thermoplastic vinyl base.it’s extremely durable without sacrifi cing attractiveness, and

very economical because it’s made from pVc vinyl.

vinyl basevinyl base, 127 harvest yellow

1.800.537.9527 | roppe.com

60 use our online fLoorinG desiGner at roppe.com700 series | VinYL Base

W a L L B a s e

700 series wall base, 100 blackhammered design rubber tile, 100 black 61700 series | VinYL Base

1.800.537.9527 | roppe.com

700 series | Vin

YL Ba

se

VinYL WaLL Base features and Benefits:

thermoplastic tV vinyl base.

contains 10% pre-consumer waste, which may contribute to the Leed® Green Building certifi cation system and meets cHps criteria.

Won’t fade, crack or chip, and holds up well under tough conditions.

available in standard 1/8" or .080" thicknesses.

co-extruded top layer resists scuffs and scratches.


rubber accessories colors page 5

co

Lor

s

rubbera c c e s s o r i e s

#34 underlap carpet edge 3/16"• 3/16" butting gauge; fast taper; long fl ange• Installation Radius: 6 ft.• 16 9-ft. secs. per ctn. (144 ft.)

#35 underlap carpet edge 1/4"• 1/4" butting gauge• Installation Radius: 8 ft.• 16 9-ft. secs. per ctn. (144 ft.)



#38 glue-down carpet edge 1/4"• 1/4" butting gauge undercut; long fl ange smooth taper • Installation Radius: 5.5 ft.• 10 9-ft. secs. per tube (90 ft.)

#39 glue-down carpet edge 5/16"• 5/16" butting gauge undercut• Installation Radius: 5.5 ft. • 10 9-ft. secs. per tube (90 ft.)

#40 carpet edge guard 9/32"• 9/32" butting gauge undercut; long fl ange, faster taper than #38 • Installation Radius: 6 ft.• 10 9-ft. secs. per tube (90 ft.)

#41 tackless carpet bar 1/4"• 1/4" butting gauge to accept tackless strip; deep undercut; long fl ange• Installation Radius: 12 ft. • 10 9-ft. secs. per tube (90 ft.)

#42 custom carpet edging 3/16"• Notched at 1/8"; undercut 3/16"; long, smooth taper (similar to #38 and #39)• Installation Radius: 5.5 ft. • 10 9-ft. secs. per tube (90 ft.)

#43 custom carpet edging 1/4"• Same as #42 above except undercut 1/4"; notched at 1/8"• Installation Radius: 5.5 ft.• 10 9-ft. secs. per tube (90 ft.)

edge guards

#50 tile/carpet joiner 7/32"• Provides smooth transition between carpet and tile• Installation Radius: 5 ft. • 10 9-ft. secs. per tube (90 ft.)

#56 tile/carpet joiner 1/2"• Similar to #50; wider opening fi ts wood and ceramic tile• Installation Radius: 5 ft.• 10 9-ft. secs. per tube (90 ft.)

#60 tile/carpet joiner 3/8"• Similar to #50; wider opening fi ts wood and ceramic tile • Installation Radius: 5 ft.• 10 9-ft. secs. per tube (90 ft.)

#32 half threshold• Butts to carpet, ceramic tile; wear resistant; colors; black, brown, black brown, fawn, dark gray and camel• Installation Radius: 9 ft.• 12 pcs. per ctn.; 30", 36", 42", 48", 60", 72"

#33 full threshold• Wear resistant compound; colors; black, brown, black brown, fawn, dark gray and camel• Installation Radius: Zero • 6 pcs. per ctn.; 30", 36", 42", 48", 60", 72"

#44 fi llet strip• Superb backing for fl ashing up the wall; color may vary due to 100% recycled content • Installation Radius: 1 inch • 16 9-ft. pcs. per ctn. (144 ft.)

thresholds

adapter & transitions

#57 landing trim• Special design for open stairwells; length 98"• Installation Radius: 3 ft.• 10 98" pcs. per tube (81.7 ft.)

landing trim

1.800.537.9527 | roppe.com

62 ruBBer accessories

#32 half threshold• Butts to carpet, ceramic tile; wear resistant; colors; black, brown, black brown, fawn, dark gray and camel• Installation Radius: 9 ft.• 12 pcs. per ctn.; 30", 36", 42", 48", 60", 72"

#28 carpet cove cap (round)• Trim for coved carpet; undercut 3/16" (fl exible); angle 45º• Installation Radius: 4 inches • 16 9-ft. secs. per ctn. (144 ft.)

#47 cove cap (square)• Undercut 1/4"; cap for coved carpets and wall paneling; angle 45º• Installation Radius: 4 inches.• 16 9-ft. secs. per ctn. (144 ft.)

#46 cove cap (square)• Undercut 1/8"; cap for coved carpets and wall paneling; angle 45º• Installation Radius: 4 inches• 16 9-ft. secs per ctn. (144 ft.)

cove caps

#19 corner guard length: 54" (standard)• Heavy-duty protection; special order to 9 ft. • Installation Radius: Not Applicable.• 6 54" pcs. per ctn. 10 pcs. per ctn. on special order sizes

corner guard

#7 underlap carpet nosing• For low pile carpet; standard nose (1-1/2") • Installation Radius: 11 ft.• 10 9-ft. secs. per tube (90 ft.)

#8 underlap stair nosing• Flange-type design for 3/16" low pile carpet; ribbed• Installation Radius: 11 ft.• 10 9-ft. secs. per tube (90 ft.)

#5 & #6 domestic stair nosing• For very light-duty applications• Installation Radius: 11 ft. • 10 9-ft. secs. per tube (90 ft.)

#m-07 modifi ed underlap stair nosing• Same as #7 above except longer nose (2-1/4")• Installation Radius: 12 ft.• 10 9-ft. secs. per tube (90 ft.)

#1 & #2 commercial stair nosing• For butting to resilient fl ooring. 2" abrasive strips available on #1 only; ribbed safety surface• Installation Radius: 11 ft.• 5 9-ft. secs. per tube (45 ft.)

#3 & #4 residential stair nosing• Same features as #1 and #2 but lighter weight, smaller step area• Installation Radius: 11 ft.• 10 9-ft. secs. per tube (90 ft.)

nosings

#9 & #10 underlap stair nosing• Flange-type design for 1/8" low pile carpet; ribbed • Installation Radius: 12 ft. • 5 9-ft. secs. per tube (45 ft.)

#11 & #12 single fl ange carpet stair nosing• Smooth surface; heavy-duty design; 3/8" butting gauge• Installation Radius: 12 ft.• 10 9-ft. secs. per tube (90 ft.)

#13 & #14 single fl ange carpet stair nosing• Smooth surface; light-duty design; 1/4" butting gauge• Installation Radius: 12 ft.• 5 9-ft. secs. per tube (45 ft.)

#15 double fl ange carpet stair nosing• Smooth surface; 3/8" butting gauge • Installation Radius: 12 ft.• 5 9-ft. secs. per tube (45 ft.)

#16 double fl ange carpet stair nosing• Smooth surface; 1/4" butting gauge• Installation Radius: 12 ft.• 5 9-ft. secs. per tube (45 ft.)

#17 & #18 undercut carpet nosing• 3/16" undercut; ribbed safety surface • Installation Radius: 12 ft.• 5 9-ft. secs. per tube (45 ft.)

1.800.537.9527 | roppe.com

63ruBBer accessories

ruB

Ber a

cc

essories

rubber accessories colors page 5

co

Lor

s

rubbera c c e s s o r i e s

#45 reducer strip 1/8"• 1/8" butting gauge; 1-1/2" width for smooth transition• Installation Radius: 8 ft.• 16 9-ft. secs. per ctn. (144 ft.)

#59 reducer strip 1/8" tapering to .080"• Special design for installations where a 1/8" must meet an .080" fl oor• Installation Radius: 4 ft.• 16 9-ft. secs. per ctn. (144 ft.)

.080"

#20 & #49 transitional reducer 7/16"(#20) 9/16"(#49) • Choose 7/16" or 9/16" butting gauge; • Installation Radius: 6 ft.• 10 9-ft. secs. per tube (90 ft.)

#21 reducer strip .080" for resilient fl oor• Butt to reducer for .080" material; 1" beveled width for good transition• Installation Radius: 6 ft.• 16 9-ft. secs. per ctn. (144 ft.)

.080"

1"

#22 & #48 reducer strip 1/8"(#22) 3/32"(#48) • Same as #21 except choose 1/8" or 3/32" butting gauge• Installation Radius: 6 ft.• 16 9-ft. secs. per ctn. (144 ft.)

1"

1"

#23 reducer strip 3/16"• 3/16" butting gauge; 1-5/16" width for smooth, neat transition• Installation Radius: 6 ft.• 16 9-ft. secs. per ctn. (144 ft.)

#24 reducer strip 1/4"• Same as #23 except 1/4" butting gauge• Installation Radius: 4 ft.• 16 9-ft. secs. per ctn. (144 ft.)



reducers

1.800.537.9527 | roppe.com

64 ruBBer accessories

slate design rubber tile, 175 slaterubber accessory #50, 165 colonial blue 6565ruBBer accessories

1.800.537.9527 | roppe.com

ruB

Ber a

cc

essories

vinyl accessories colors page 5

co

Lor

s

vinyla c c e s s o r i e s

#204 undercut carpet nosing 1/4"• Heavy-duty for 1/4" and 5/16" carpet • Installation Radius: 11 ft.• 5 12-ft. secs. per ctn. (60 ft.)

#203 domestic stair nosing 1/8"• For light-duty applications; installs over vinyl tile or sheet goods• Installation Radius: 11 ft.• 5 12-ft. secs. per ctn. (60 ft.)

#202 overlap stair nosing 1/8"• Square nosing; ribbed safety surface • Installation Radius: 11 ft.• 10 12-ft. secs. per ctn. (120 ft.)

#206 double undercut stair nosing 1/4"• For 1/4" and 5/16" carpet• Installation Radius: 11 ft.• 5 12-ft. secs. per ctn. (60 ft.)

#188 cove stick• Superb backing for fl ashing up the wall color neutral only; angle 45º• Installation Radius: 2 ft.• 100 5-ft. pcs. per ctn. (500 ft.)

#167 fi llet strip• Superb backing for fl ashing up the wall color may vary due to 100% recycled content; angle 45º• Installation Radius: 1 ft.• 5 20-ft. coils per ctn. (100 ft.)

fi llets & tub moldings

nosings

#189 fi llet molding• Superb backing for fl ashing up the wall color snow only; angle 45º• Installation Radius: 1 ft.• 25 5-ft. pcs. per ctn. (125 ft.)

#190 & #191 tub molding1" (#190) 1-1/2" (#191)• High-gloss fi nish, self-stick backing, 1" or 1-1/2" cove for tubs, counters, shelves; colors snow and almond only; angle 45º• Installation Radius: 1 ft. • 24 5-ft. pcs. per ctn. (120 ft.)

#158 cove cap (square) 1/4"• Cap for coved carpets and wall paneling• Installation Radius: 1 ft.• 40 12-ft. secs. per ctn. (480 ft.)

#161 carpet cove trim• For coved carpet; undercut 3/16" (fl exible)• Installation Radius: 10 ft.• 20 12-ft. secs. per ctn. (240 ft.)

#165 cove cap (square) 1/8"• Cap for coved sheet vinyl; undercut 1/8"• Installation Radius: 1 ft. • 50 12-ft. secs. per ctn. (600 ft.)

#193 vinyl fl ash cap height: 4" • Vinyl fi llet strip and cove cap in one product; use for vinyl sheet or carpet up to 1/4" thick• Installation Radius: 4 inches • 20 5-ft. secs. per ctn. (100 ft.)

4"

cove caps

#156 glue-down reducer 5/16"• 5/16" butting gauge undercut; long fl ange, smooth taper• Installation Radius: 18 ft.• 5 12-ft. secs. per ctn. (60 ft.)

reducers

#160 glue-down reducer 3/16"• Undercut 3/16"; fl ange and transition combined; smooth transition• Installation Radius: 10 ft.• 20 12-ft. secs. per ctn. (240 ft.)

#168 underslung reducer• Binder-bar edging for resilient fl ooring; undercut .115" for use with 1/16" to 1/8" material• Installation Radius: 3 ft.• 2 35-ft. coils per ctn. (70 ft.)

#169 glue-down reducer 1/4"• 1/4" undercut; long fl ange, smooth taper• Installation Radius: 10 ft.• 5 12-ft. secs. per tube (60 ft.)

#172 tile reducer 1/8"• Beveled edge for resilient fl ooring; 1/8" butting edge• Installation Radius: 18 ft.• 50 3-ft. secs. per ctn. (150 ft.)

#207 vinyl 3/8" butt stair nosing• 3/8" butt stair nosing for carpet and Rop-Cord® tile• Installation Radius: 10 ft., color Black only• 5 12-ft. secs. per ctn. (60 ft.)

1.800.537.9527 | roppe.com

66 VinYL accessories

#174 glue-down reducer 1/4"• Undercut 1/4" with 2" transition• Installation Radius: 11 ft. • 10 12-ft. secs. per ctn. (120 ft.)

#176 multi-use reducer 1/2"• For carpet, ceramic tile or wood fl oors• Installation Radius: 6 ft.• 10 12-ft. secs. per ctn. (120 ft.)

#196 carpet reducer 3/8"• Designed especially for 3/8" carpet• Installation Radius: 10 ft.• 10 12-ft. secs. per ctn. (120 ft.)

reducers (cont.)

#350 quarter round• Designed to outperform wood to complement a tread, tile or base job• Installation Radius: 3 ft.• 10 12-ft. pieces or 40' coil

wall accessories

#166 corner guard 1/8"length: 54" (standard)• 1-1/2" returns; standard length 54" (special order to 9 ft., minimum quantities required) • Installation Radius: Not Applicable.• 12 54" pcs. per ctn. (54 ft. on standard orders)

corner guard

#152 snap-down divider• 1-13/32" wide removable section for joining carpets• Installation Radius: 6 ft.• 20 12-ft. secs. per ctn. (240 ft.)

adapters | transitions

#154 snap-down edging• 1-9/64" wide removable section for joining carpet to tile• Installation Radius: 6 ft.• 20 12-ft. secs. per ctn. (240 ft.)

adapters | transitions#159 tile carpet joiner• Provides smooth carpet/ tile transition• Installation Radius: 10 ft.• 20 12-ft. secs. per tube (240 ft.)

#175 snap-down edging• 1-1/4" wide removable section for joining tile to wood• Installation Radius: 6 ft.• 20 12-ft. secs. per ctn. (240 ft.)

#177 tile carpet joiner• Joins 1/4" carpet to 1/8" tile• Installation Radius: 10 ft.• 5 12-ft. secs. per ctn. (60 ft.)

#179 snap-down super edge• 1-7/8" wide removable section for joining carpet to wood/ceramic• Installation Radius: 6 ft.• 5 12-ft. secs. per ctn. (60 ft.)

#182 ceramic/wood carpet transition 3/8"• Molding for joining 5/16" carpet to 3/8" ceramic/wood fl ooring• Installation Radius: 12 ft.• 10 12-ft. secs. per tube (120 ft.)

#195 feature strip• Designed to transition between 1/8" tiles or add interest to fl oor design • Installation Radius: 3 ft.• 50 3-ft. pcs. per ctn. (150 ft.)

#155 single fl ange track• Works with #152, #154, #175 and #179; color Black only• Installation Radius: Zero• 10 12-ft. pcs. per ctn. (120 ft.)

tracks

#178 fl exi-track single fl ange track• Works with #152, #154, #175 and #179; fl exible, contours easily; color Black only• Installation Radius: 6 ft.• 20 12-ft. pcs. per ctn. (240 ft.)

1.800.537.9527 | roppe.com

67VinYL accessories

Vin

YL ac

cesso

ries

roppe designed its line of subfl oor leveling products with you in mind.comprised of a unique thermoplastic rubber compound, they’re fl exible and easy to

work with, yet strong and durable. unlike the others, we have a range of thicknesses

available, pre-scored for easy on-site trimming. Better yet, our 12" and longer 18"

lengths give you extra options when it comes to installation because there’s no

piecing together required.

subfloorsuBfLoor LeVeLer features and Benefits:

contains 100% pre-consumer waste, which may contribute to the Leed® Green Building certifi cation system.

available in 48" lengths; in two depths, 12" (304.8mm) and 18" (457.2mm), and four thicknesses: 1/8", 1/4", 3/8" and 1/2".

No waiting, no curing. Just fast, easy leveling.

constructed of a durable thermo-plastic rubber compound, so it’s environmentally friendly.

install directly over concrete, wood or steel subfl oors.

installs easily using 535u adhesive depending on substrate and installation type, or if rolling loads are a concern.

L e V e L e r

3/32"

THICK

5/16"

THICK

CUT LINE

1/4" T

HICK

CUT LINE

3/16"

THICK

CUT LINE

1/8" T

HICK

CUT LINE

CUT LINE

12"3/8" .040"

#301 = 3/8" x 12" (304.8mm)

CUT LINE

3/16"

THICK

CUT LINE

1/8" T

HICK

3/32"

THICK

CUT LINE

12"1/4" .040"

#302 = 1/4" x 12" (304.8mm)

1/4" T

HICK

5/16"

THICK

3/8" T

HICK

CUT LINE

CUT LINE

CUT LINE

3/32"

THICK

1/8" T

HICK

3/16"

THICK

CUT LINE

CUT LINE

CUT LINE

18"1/2" .040"

#303 = 1/2" x 18" (457.2mm)

12"1/8" .040"

#304 = 1/8" x 12" (304.8mm)

1.800.537.9527 | roppe.com

68 suBfLoor LeVeLer

subfloorL e V e L e r

1.800.537.9527 | roppe.com

69suBfLoor LeVeLersubfl oor leveler #301, color varies due to 100% recycled content

suB

fLoo

r LeVeLer

adhesives

so, always make

roppe your choice to

ensure long-lasting and

dependable service.

no matter what the

application, we have

an adhesive right for

the job, each specially

formulated to be used

with roppe fl ooring

products. in fact, our

adhesives must be used

for roppe warranties to

apply.

Choosing the right adhesives can make the difference in the appearance, performance and longevity of your fl oor.

this adhesive meets cri Green Label plus criteria.

rop360 acrylic tile and stair tread adhesive is specifi cally designed for the permanent installation of northern timbers, northern Leathers, Wood naturals, safetcork Vinyl tile (excluding esd tile), rubber tile (excluding 800 series rubber tile, Lug-Back tile, recoil, tufl ex & spike/skate resistant tile), rubber & Vinyl stair treads, (excluding butting stair treads) stringers and risers. use of this adhesive is limited to casual foot traffi c, in areas where there are no lateral shear stresses or rolling loads, nor in areas that will not be subjected to topical moisture or liquids.

Benefits and features• May contribute to LEED CI and NC credits EQ 4.1.• Antimicrobial feature helps inhibit the growth of mold and mildew.• Roppe adhesives meet CRI Green Label Plus (ID Number 14524), CHPS-01350 and

scaQMd rule #1168 & rule 443.1 emissions standards, and meets prop 65.

rop215 Wall Base adhesive is an acrylic Based adhesive specifi cally formulated for the installation of roppe Visuellé Wall Base, Visuellé factory corners, 700 series Wall Base, ready Wall Base, Vinyl Wall Base and Vinyl factory corners, which provides excellent adhesion to recommended surfaces.

Benefits and features• May contribute to LEED CI and NC credits EQ 4.1.• Antimicrobial feature helps inhibit the growth of mold and mildew.• Roppe adhesives meet CRI Green Label Plus, CHPS and SCAQMD emissions

standards, and meets prop 65.

rop220 pinnacle Wall Base adhesive is an acrylic Based adhesive specifi cally formulated for the installation of roppe pinnacle Wall Base, pinnacle plus Wall Base, rubber corner Blocks and pinnacle inside and outside factory Molded corners, which provides excellent adhesion to recommended surfaces.

Benefits and features• May contribute to LEED CI and NC credits EQ 4.1.• Antimicrobial feature helps inhibit the growth of mold and mildew.• Roppe adhesives meet CRI Green Label Plus, CHPS and SCAQMD emissions

standards, and meets prop 65.

rop435 solvent free epoxy flooring adhesive is a solvent free, non-fl ammable, high performance epoxy adhesive for indoor installations of rubber tile and rubber stair treads over approved substrates. outstanding adhesion in heavy or extra heavy traffi c areas. a must for installations subjected to rolling loads and lateral sheer stress (i.e.: hospitals & nursing homes etc.)

Benefits and features• May contribute to LEED CI and NC credits EQ 4.1.• Antimicrobial feature helps inhibit the growth of mold and mildew.• Roppe adhesives meet CHPS and SCAQMD emissions standards, and meets Prop 65.

rop445 rop-cord adhesive is a synthetic Latex-Based adhesive, which is water resistant when completely cured and made specifi cally for permanent indoor and outdoor installations of rop-cord Vulcanized and non-Vulcanized tile or rolls over on or above grade porous substrates, excluding metal and other non-porous substrates, nor in areas where rop-cord will be exposed to lateral sheer stress or rolling loads.

Benefits and features• May contribute to LEED CI and NC credits EQ 4.1.• Antimicrobial feature helps inhibit the growth of mold and mildew.• Roppe adhesives meet CHPS and SCAQMD emissions standards.

1.800.537.9527 | roppe.com

70 adHesiVes

always refer to individual fl ooring products’ 10-part specifi cation sheet for correct trowel size, approved substrates, installation type (i.e., rolling loads & lateral sheer stress) & other specifi c instructions prior to installation.

c o L o r e d c a u L K s

roppe colored caulks let you fi nish your fl ooring installation to perfection with colors that match just right. there’s no color we can’t create in caulk for you. perfect for touch-ups and to hide gaps or imperfec-tions that can occur during installation of rubber stair treads and tile, our colored caulks give you an unmatched clean, professional-looking project, no matter what the application.

rop635 solvent-free Moisture-cured polyurethane adhesive is a premium one-part adhesive designed for high performance installations of roppe recoil fitness flooring for indoor installations over porous, metal and other non-porous substrates, on grade, below grade, or above grade. rop635 is also required for all outdoor installations of rolls, square & inter-locking tile over concrete only.

Benefits and features• May contribute to LEED CI and NC credits EQ 4.1.• Roppe adhesives meet SCAQMD emissions standards.

roppe Quik-stik adhesive tape is comprised of the same features and benefi ts of traditional adhesives which fl ooring contractors and architects have come to expect, but with increased installation value associated with stairway access time. Quik-stik is a pressure sensitive hot-melt adhesive applied to a scrim reinforcement with one-side covered with a protective paper developed to install roppe rubber & Vinyl stair treads, rubber risers and rubber stringers over approved substrates. Quik-stik adhesive tape is also resistant to aging, free of solvents, and has no lingering odor associated with traditional adhesives! Quik-stik is available in 9-1/2" x 164' for adhering rubber & vinyl stair treads, and 1-1/2" x 164' rolls for adhering fi xing nosing only. the 9-1/2" width Quik-stik is installed directly on each products entire backing (excluding 1/2" nose area), and the 1 1/2" width is utilized for bonding the stair tread nosing. Quik-stik adhesive tape must also be used in combination with ropecc epoxy caulking compound.

rop605 two-part esd epoxy is recommended for the installation of roppe’s esd static control solid Vinyl tile and esd rubber static control tile. rop605 is a non-fl ammable, high performance epoxy adhesive for indoor installations over porous and non-porous substrates on grade, below grade, or above grade, and available in both quarts and gallon containers. caution: rop605 two-part epoxy only must be used in areas subjected to rolling loads, lateral sheer stress and over non-porous substrates including but not limited to metal.

Benefits and features• May contribute to LEED CI and NC credits EQ 4.1.• Antimicrobial feature helps inhibit the growth of mold and mildew.• Roppe adhesives meet SCAQMD emissions standards.

ropecc epoxy caulking compound (nose fi ller) is a solvent-free epoxy caulking compound designed specifi cally to prevent the fl exing and premature cracking of roppe rubber & Vinyl stair treads and nosing. ropecc epoxy caulking compound is applied directly inside the internal nose area of the stair treads and stair nosings, prior to installation, and when uniformly and properly applied fi lls slight voids or gaps between the internal nose angle of the tread/nosings and step edge, developing a strong bonding support between the two surfaces. this product can be used to repair cracks, holes, depressions, and worn or broken edges on concrete, wood, or metal stairs. ropecc epoxy caulking compound is available in 1-quart and 1-gallon pails and in 13.5 ounce dual cartridges.


rop535u “universal” urethane enhanced epoxy is a solvent-free, two-component, urethane enhanced epoxy adhesive for high performance installations of northern timbers, northern Leathers, Wood naturals, safetcork solid Vinyl tile, rubber & Vinyl stair treads, rubber tile, Lug-Back rubber tile, rubber stair nosings & accessories, spike/skate resistant tile, subfl oor Leveler & rubber and Vinyl stringers and risers, in addition to interior installations of roppe’s Vulcanized and non-Vulcanized rop-cord (for rolling loads), over approved substrates. outstanding adhesion and elasticity. a must for installations subjected to rolling loads and lateral sheer stress (i.e.: hospitals & nursing homes etc.)


rop604 acrylic esd adhesive is recommended for the installation of roppe’s esd static control solid Vinyl tile and esd rubber static control tile. rop604 is a non-fl ammable; one-part acrylic base adhesive for indoor installations over approved concrete and wood subfl oors only, on grade or above grade, and is available in both quarts and gallon containers. caution: rop605 two-part epoxy only must be used in areas subjected to rolling loads, lateral sheer stress and over non-porous substrates including but not limited to metal, and below grade.

Benefits and features• May contribute to LEED CI and NC credits EQ 4.1.• Antimicrobial feature helps inhibit the growth of mold and mildew.• Roppe adhesives meet SCAQMD emissions standards.

71adHesiVes

ad

HesiV

es



Lor

s

pro

du

ct

spec

ific

ati

on

s

products p e c i f i c a t i o n s


outside corner inside corner outside corner

micro corners

outside cornerinside corner#10 #15 #20 #30 #90 #95 #00#35#25 #85 #05#50 #55 #65 #75

SanitaryButtToe Base 5/8"

LongToe Base 1"

StandardToe Base 5/8"

NoToe Base

2.00"

Toe Base

BASE TYPE THICKNESS 4 FT. PCS. 120 FT. COILS

SBR Rubber 2-1/2" (63.5mm) 2-1/2" (63.5mm) 3" (76.2mm) 3" (76.2mm) 3-1/2" (88.9mm) 3-1/2" (88.9mm) 1/8" (3.175mm) 4" (101.6mm) 4" (101.6mm) 4-1/2" (114.3mm) 4-1/2" (114.3mm) 5" (127.0mm) 5" (127.0mm) 5-1/2" (139.7mm) 5-1/2" (139.7mm) 6" (152.4mm) 6" (152.4mm)

Butt Toe*Long Toe* 1/8" (3.175mm) 4" (101.6mm)Sanitary Toe*

*Available in SBR rubber only.

pinnacle rubber base

OCOutside

NT OCNo-ToeOutside

LT OCLong ToeOutside

UL OCUnderlapOutside

Sanitary Corner

IC StandardToe, Inside

LT OCLong Toe Outside

OC Standard Toe, Outside

NT OCNo ToeOutside

ST OCSanitary Toe

Corner Outside

UL OCUnderlap Outside

CORNER TYPE LENGTH OF RETURN SIZES AVAILABLE

2-1/2" (63.5mm) 2-1/4" (57.15mm) 4" (101.6mm) 6" (152.4mm)

No Toe, Outside 2-1/4" (57.15mm) 2-1/2" (63.5mm) 4" (101.6mm)

Underlap, Outside* 3" (76.2mm) (with underlap) Long Toe, Outside* 2-1/4" (57.15mm) 4" (101.6mm)Sanitary Toe, Outside* 3-3/4" (95.25mm)


Standard Toe, InsideStandard Toe, Outside

corners

pinnacle plus profi les

SanitaryButtToe Base 5/8"

LongToe Base 1"

StandardToe Base 5/8"

NoToe Base

2.00"

Toe BaseSanitaryButt

Toe Base 5/8"Long

Toe Base 1"Standard

Toe Base 5/8"No

Toe Base

2.00"


Toe Base 5/8"Long

Toe Base 1"Standard

Toe Base 5/8"No

Toe Base

2.00"


Toe Base 5/8"Long

Toe Base 1"Standard

Toe Base 5/8"No

Toe Base

2.00"

Toe Base

standard toe:for many installations.

no toe:Adds a decorative touch to carpeted interiors.

butt toe:Butts precisely to 1/8" fl oor coverings.

long toe:Extends 1" to cover wide irregularitiesbetween fl oor and wall.

sanitary toe:High safety or hygienic applications. The 2" toe butts up against our rubber tile, eliminating possible base-to-tile overlap/gaps.

product specifi cationsAll product dimension measurements are nominal in accordance with ASTM standards.1.800.537.9527 | roppe.com

72 product specifications

BASE TYPE THICKNESS 4 FT. PCS. 120 FT. COILS

SBR Rubber 2-1/2" (63.5mm) 2-1/2" (63.5mm) 3" (76.2mm) 3" (76.2mm) 3-1/2" (88.9mm) 3-1/2" (88.9mm) 1/8" (3.175mm) 4" (101.6mm) 4" (101.6mm) 4-1/2" (114.3mm) 4-1/2" (114.3mm) 5" (127.0mm) 5" (127.0mm) 5-1/2" (139.7mm) 5-1/2" (139.7mm) 6" (152.4mm) 6" (152.4mm)

Butt Toe*Long Toe* 1/8" (3.175mm) 4" (101.6mm)Sanitary Toe*


pinnacle rubber base

standard toe:for many installations.

prod

uc

t specific

atio

ns

pinnacle sbr rubber base (ts)arcHitects’ MateriaL specifications

flooring accessories shown in the fi nish schedule or listed herein as cove Base or Wall Base shall be 1/8" (3.175mm) thick type ts, tHerMoset VuLcanized pinnacLe eXtruded ruBBer WaLL Baseas manufactured by roppe corporation, fostoria, ohio. it shall be constructed of fi rst quality materials, properly vulcanized, and shall be smooth and free from imperfections which detract from its appearance. the base shall conform fully to all the requirements of standard specifi cation f-1861, type ts (thermoset Vulcanized rubber), Group 1 (solid). all Wall Base shall be of the type (straight, style a, or cove, style B), with a nominal height of (2-1/2" {63.5mm}, 3" {76.2mm}, 3-1/2" {88.9mm}, 4" {101.6mm}, 4-1/2" {114.3mm}, 5" {127.0mm}, 5-1/2” {139.7mm} and 6" {152.4mm}) _________, in nominal lengths of (48" {1.22m}, or 120 ft. {36.576m}) _________, in the color stated __________, and 1/8" (3.175mm) nominal thickness.

sanitarY WaLL Base shall be 4" (101.6mm) high with a 2" (50.8mm) sanitary toe. the toe shall be 1/8" (3.175mm) nominal thick. the length shall be (48" {1.22m}) nominal long and in the color selected _________.

basemates® (ts)arcHitects’ MateriaL specifications

BaseMates® shown in the fi nish schedule or listed herein as BaseMates shall be Roppe 1/8" (3.175mm) to 5/16" (7.93mm) thick (straight & concaved foundation when applicable) and will be Type TS THERMOSET EXTRUDED VULCANIZED RUBBER furnished by Roppe Corporation, Fostoria, Ohio. Each shall be constructed of fi rst quality materials and shall be smooth and free from imperfections which detract from its appearance. The base shall conform fully to the requirements of Standard Specifi cations F-1861, Type TS (Thermoset Vulcanized Rubber), Group 1 (solid). BaseMates shall be 3/4" (19.05mm), 1-1/8" (28.575mm) and 1-3/4" (44.45mm) in height and in rolls 60 ft. (18.288m) in length with unique identical colored divider which easily detaches generating two 60-ft. pieces (120 ft. total per roll {36.576m}); and in the color stated ________.

AOO base shoe 1-1/8" AO2 base shoe 1-1/8" AO3 base shoe 1-1/8"AO1 base shoe 1-1/8"

top triMs

Base sHoes

BO2 top trim 3/4" BO3 top trim 3/4"

C2O top trim 1-3/4"

BO1 top trim 3/4"BOO top trim 3/4"

CO1 top trim 1-3/4"

C23 top trim 1-3/4"C21 top trim 1-3/4"

CO2 top trim 1-3/4"COO top trim 1-3/4"

C22 top trim 1-3/4"

1.800.537.9527 | roppe.com

73product specifications



Lor

s

pro

du

ct

spec

ific

ati

on

s


alphabase® rubber base (ts)arcHitects’ MateriaL specifications

flooring accessories shown in the fi nish schedule or listed herein as cove Base or Wall Base shall be 1/8" (3.175mm) thick type ts, tHerMoset VuLcanized aLpHaBase® eXtruded ruBBer WaLL Base as manufactured by roppe corporation, fostoria, ohio. it shall be constructed of fi rst-quality materials, properly vulcanized, and shall be smooth and free from imperfections which detract from its appearance. the base shall conform fully to all the requirements of standard specifi cation f-1861, type ts (thermoset Vulcanized rubber), Group 1 (solid). all Wall Base shall be of the type (straight, style a, or cove, style B), with a nominal height of (2-1/2" {63.5mm}, 3" {76.2mm}, 3-1/2" {88.9mm}, 4" {101.6mm}, 4-1/2" {114.3mm}, 5" {127.0mm}, 5-1/2" {139.7mm} and 6" {152.4mm}) _________, in nominal lengths of (48" {1.22m}, or 120 ft. {36.576m})________, in the color stated _________, and 1/8” (3.175mm) nominal thickness.

visuellé® wall base (tp)arcHitects’ MateriaL specifications

flooring accessories shown in the fi nish schedule or listed herein as Visuellé® Wall Base shall be roppe 1/8" (3.175mm) to 3/8" (9.525mm) thick type tp tHerMopLastic ruBBer eXtruded Base furnished by roppe corporation, fostoria, ohio. it shall be constructed of fi rst-quality materials and shall be smooth and free from imperfections which detract from its appearance. the base shall conform fully to the requirements of standard specifi cations f-1861, type tp (thermoplastic rubber), Group 1 (solid). the wall base shall be 4-1/2" (114.3mm) or 7-3/4" (196.85mm) in height and in rolls 40 ft. (12.192mm) in length and in the ___________ color stated.tecHnicaL dataVisuellé Wall Base: Meets federal specifi cation f-1861 for type tp thermoplastic rubberthickness: astM f-386, 1/8" (3.175mm) to 1/4" (6.35mm) ±.015"Hardness: 90 ±5flexibility: astM f-137, 1/4" (6.35mm) mandrel, no cracking or breakingstaining: astM f-1861 section 12, complies, no stainingLight resistance: astM f-1515, average delta e less than 8.0chemical resistance: astM f-925, complies (chemicals listed in astM f-1861, 8.4.1-8.4.11)dimensional stability: astM f-1861, complies, ±.25% x lengthsquareness: 90 degrees ±.5 degrees

visuellé® wall baseBASE TYPE THICKNESS 40 FT. COILS

Standard 3/8" (3.175mm) nominal 4-1/2" (114.3mm) 1/4" (6.35mm) nominal 7-3/4" (196.9mm)

VISUELLÉ® CORNER SYSTEMS (All corners are packed 4 to a carton)Corner Type Weight per Carton

7-3/4" (196.9mm) Mitered Outside 5 lbs. (2.27kg)7-3/4" (196.9mm) Mitered Inside 5 lbs. (2.27kg)4-1/2" (114.3mm) Mitered Outside 4 lbs. (1.81kg)4-1/2" (114.3mm) Mitered Inside 4 lbs. (1.81kg)

3/8"

4-1/2"

base profi le

1/4"

7-3/4"

base profi le

RUBBER CORNER BLOCKS MITERED CORNERS

pinnacle plus rubber base (ts)arcHitects’ MateriaL specifications

flooring accessories shown in the fi nish schedule or listed herein as cove Base or Wall Base shall be 1/8" (3.175mm) thick type ts, tHerMoset VuLcanized pinnacLe pLus eXtruded ruBBer WaLL Base as manufactured by roppe corporation, fostoria, ohio. it shall be constructed of fi rst quality materials, properly vulcanized, and shall be smooth and free from imperfections which detract from its appearance. the base shall conform fully to all the requirements of standard specifi cation f-1861, type ts (thermoset Vulcanized rubber), Group 1 (solid). all Wall Base shall be of the style __________ (style B, Base shoe or cove), with a height of _________ (4" {101.6mm}, 4-9/16" {115.9mm}, 5" {127.0mm}, 5-1/4" {133.4mm}, 5-1/2" {139.7mm}, 5-5/8" {142.9mm}) nominal in the ________ color stated, and 1/8" (3.175mm) nominal thickness. the length shall be ________ (60 ft.{18.288m} nominal or 120 ft.{36.576m}) nominal long based on ___________ profi le selected.

tecHnicaL data pinnacle rubber Base: Meets federal specifi cation f-1861 for type ts thermoset Vulcanized rubberthickness: astM f-386, 1/8" (3.175mm) ±.015"Hardness: 75 ±5flexibility: astM f-137, 1/4" (6.35mm) mandrel, no cracking or breakingstaining: astM f-1861 section 12, complies, no stainingLight resistance: astM f-1515, average delta e less than 8.0chemical resistance: astM f-925, complies (chemicals listed in astM f 1861, 8.4.1-8.4.11)dimensional stability: astM f-1861, complies, ±.25% x lengthsquareness: 90 degrees ±.5 degrees

rubber corner blocks or micro corners (ts)arcHitects’ MateriaL specifications

roppe rubber corner Blocks or Micro corner shown in the fi nish schedule or listed herein as roppe rubber corner Blocks or Micro corners shall be 1/4" (25.4mm) from fi nish corner to edge and will be type ts tHerMoset eXtruded VuLcanized ruBBer furnished by roppe corporation, fostoria, ohio. each shall be constructed of fi rst-quality materials and shall be smooth and free from imperfections which detract from its appearance. the corner shall conform fully to the requirements of standard specifi cations f-1861, type ts (thermoset Vulcanized rubber), Group 1 (solid). rubber corner Blocks or Micro corners shall be __________ (inside or outside preference inserted) and ________ (custom size inserted) in length and in the color stated ______.




outside corneroutside cornerinside corner


outside corner

color stated ______. color stated ______. color stated ______.

inside corner outside corner

micro corners

outside cornerinside corner

prod

uc

t specific

atio

ns

700 series wall base (tp)arcHitects’ MateriaL specificationsflooring accessories shown in the finish schedule or listed herein as cove Base or Wall Base shall be roppe 1/8" (3.175mm) thick type tp tHerMopLastic ruBBer eXtruded, 700 series WaLL Base as manufactured by roppe corporation, fostoria, ohio. it shall be con-structed of first-quality materials and shall be smooth and free from imperfections which detract from its appearance. the base shall conform fully to the performance requirements of standard specification f-1861, type tp (thermoplastic rubber), Group 2 (layered). all wall base shall be of the type________ (straight, style a, or cove, style B), with a height of___________ (2-1/2" {63.5mm}, 4" {101.6mm}, or 6" {152.4mm}), in lengths of _________ (48" {1.22m} or 120 ft. {36.576m}), and in the color stated _______, and of 1/8" (3.175mm) thickness.

tecHnicaL data700 series Base: Meets federal specification f-1861 for type tp thermoplastic rubberthickness: astM f-386, 1/8" (3.175mm) ±.015"Hardness: 90 ±5flexibility: astM f-137, 1/4" (6.35mm) mandrel, no cracking or breakingstaining: astM f-1861 section 12, complies, no stainingLight resistance: astM f-1515, average delta e less than 8.0chemical resistance: astM f-925, complies (chemicals listed in astM f-1861, 8.4.1-8.4.11)dimensional stability: astM f-1861, complies, ±.25% x lengthsquareness: 90 degrees ±.5 degrees

vinyl wall base (tv) arcHitects’ MateriaL specifications

flooring accessories shown in the finish schedule or listed herein as vinyl cove Base or Wall Base shall be type tV tHerMopLastic VinYL roppe VinYL WaLL Base, furnished by roppe corporation, fostoria ohio. it shall be constructed of first quality materials and shall be smooth and free from any imperfections which detract from its appear-ance. the base shall conform fully to the requirements of the standard specification f-1861, type tV, thermoplastic Vinyl, Group 2 (layered); style a (straight) or style B (cove). all wall base shall be ______ (2-1/2" {63.5mm}, 4" {101.6mm}, or 6" {152.4mm}) in height and in lengths of _______ (48" {1.22m} or 120 ft. {36.576m}). the wall base shall be of the type __________ (straight or cove), in _______ (.080" {2.03mm} or 1/8" {3.175mm}) gauge thickness, and in the _________ color stated.

tecHnicaL dataVinyl Base: Meets federal specification f-1861 for type tV thermoplastic Vinylthickness: astM f-386, 1/8" (3.175mm) ±.015" or .080" (2.03mm) +.015"/ –.005"Hardness: 90 ±5 flexibility: astM f-137, 1/4" (6.35mm) mandrel, no cracking or breakingstaining: astM f-1861 section 12, complies, no stainingLight resistance: astM f-1515, average delta e less than 8.0chemical resistance: astM f-925, complies (chemicals listed in astM f-1861, 8.4.1-8.4.11)dimensional stability: astM f-1861, complies, ±.25% x lengthsquareness: 90 degrees ±.5 degrees

OCOutside

NT OCNo-ToeOutside



Sanitary CornerOCOutside

NT OCNo-ToeOutside



Sanitary Corner

cornersstandard toe: for many installations.no toe: adds a decorative touch to carpeted interiors.

vinyl wall base

Base tYpe tHicKness 4 ft. pcs. 120 ft. coiLstV Vinyl 2-1/2" (63.5mm) 2-1/2" (63.5mm)standard toe 4" (101.6mm) 4" (101.6mm)& no toe 6" (152.4mm) 6" (152.4mm)

.080" (2.03mm) & 1/8" (3.175mm)

corner tYpe LenGtH of return sizes aVaiLaBLe 2-1/2" (63.5mm) 3" (76.2mm) 4" (101.6mm) 6" (152.4mm)

no toe, outside 3" (76.2mm) 2-1/2" (63.5mm) 4" (101.6mm)




NT OCNo ToeOutsideSanitaryButt

Toe Base 5/8"Long

Toe Base 1"Standard

Toe Base 5/8"No

Toe Base

2.00"

Toe Base

OCOutside

NT OCNo-ToeOutside



Sanitary CornerOCOutside

NT OCNo-ToeOutside



Sanitary Corner

corners700 series wall base

corner tYpe LenGtH of return sizes aVaiLaBLe 2-1/2" (63.5mm) 3" (76.2mm) 4" (101.6mm) 6" (152.4mm)

no toe, outside 3" (76.2mm) 2-1/2" (63.5mm) 4" (101.6mm)


Base tYpe tHicKness 4 ft. pcs. 120 ft. coiLstpr rubber 2-1/2" (63.5mm) 2-1/2" (63.5mm)standard toe 1/8" (3.175mm) 4" (101.6mm) 4" (101.6mm)& no toe 6" (152.4mm) 6" (152.4mm)

standard toe: for many installations.no toe: adds a decorative touch to carpeted interiors.



NT OCNo ToeOutsideSanitaryButt

Toe Base 5/8"Long

Toe Base 1"Standard

Toe Base 5/8"No

Toe Base

2.00"


Toe Base 5/8"Long

Toe Base 1"Standard

Toe Base 5/8"No

Toe Base

2.00"


Toe Base 5/8"Long

Toe Base 1"Standard

Toe Base 5/8"No

Toe Base

2.00"

Toe Base

1.800.537.9527 | roppe.com




Lor

s

pro

du

ct

spec

ific

ati

on

s


dimensions rubber tilearcHitects’ MateriaL specifications

all fl oors shown in the fi nish schedule or listed in this specifi cation for heavy traffi c areas shall be roppe’s _______(insert design name) ruBBer tiLe, manufactured by roppe corporation, fostoria, ohio. the tile shall be homogeneously constructed of fi rst quality resilient rubber compound, and shall conform to astM f-1344, class 1. the tile shall be 19-11/16" x 19-11/16" (50cm x 50cm) size, 1/8" (3.175mm) gauge size, and in the color _________ (insert color) selected.

raised design rubber fl oor tile arcHitects’ MateriaL specifications

all fl oors shown in the fi nish schedule or listed in this specifi cation for heavy traffi c areas shall be roppe’s _______(insert design name) ruBBer tiLe, manufactured by roppe corporation, fostoria, ohio. the tile shall be homogeneously constructed of fi rst quality resilient rubber compound, and shall conform to astM f-1344, class 1. the tile shall be 19-11/16" x 19-11/16" (50cm x 50cm) size, 1/8" (3.175mm) gauge and in the color _________ (insert color) selected.

safetcork® rubber fl oor tilearcHitects’ MateriaL specifications

all tile fl oors shown in the fi nish schedule or listed in this specifi cation as rubber tile fl ooring shall be roppe safetcorK® ruBBer tiLe, manufactured by roppe corporation, fostoria, ohio. the tile shall conform to astM f-1344, class 1. the tile shall be ______ (1/8" {3.175mm} or 3/16" {4.76mm}) thick and size ________ (12" x 12" {304.8mm x 304.8mm}, or 19-11/16" x 19-11/16" {50cm x 50cm} in 1/8" only). the color shall be _________ (insert color name & number).

smooth fi nish rubber tilearcHitects’ MateriaL specifications

all fl oors shown in the fi nish schedule or listed in this specifi cation for heavy traffi c areas shall be roppe’s _______ (insert design name) ruBBer tiLe, manufactured by roppe corporation, fostoria, ohio. the tile shall be homoge-neously constructed of fi rst quality resilient rubber com-pound, and shall conform to astM f-1344, class 1. the tile shall be ________ (insert size selected) (12" x 12" {304.8mm x 304.8mm}, or 19-11/16" x 19-11/16" {50cm x 50cm}), 1/8" (3.175mm) or 3/16” (4.76mm) gauge size, and in the color _________ ((insert color name and number, {plain [p] or marbleized [M]} selected).

lug-back vantage rubber fl oor tilearcHitects’ MateriaL specifications

all fl oors shown in the fi nish schedule or listed in this specifi cation for heavy traffi c areas shall be roppe’s LuG-BacK VantaGe ruBBer tiLe, manufactured by roppe corporation, fostoria, ohio. the tile shall be homogeneously constructed of fi rst quality resilient rubber compound, and shall conform to astM f-1344, class 1. the tile shall be 19-11/16" x 19-11/16" (50cm x 50cm) size, 13/64" (5.16mm) gauge size, and in the color _______ (insert color) selected.

rubber tile specifi cationscharacteristic: requirement astM test MethodHardness: Min 85 shore a d-2240static Load resistance: < 0.005 in. (0.127mm) at 250lb. f-970 (113.4kg) load resistance to short-term no more than slight change in f-925chemical exposure: surface dulling, surface attack, or staining.resistance to Heat: average delta e not greater than 8.0 f-1514abrasion resistance: Less than 1 gram loss after 1,000 cycles d-3389dimensional stability: the dimensional change of the f-2199 rubber fl oor tile in both the machine direction (Md) and the across machine (aMd) shall not exceed 0.15%thickness: as specifi ed smooth surface tile: + 0.005 in. (+ 0.127mm) f-386 Molded pattern tile: + 0.015/-0.005 in. (+0.381 mm/-0.127mm) f-386 embossed pattern tile: + 0.015/-0.005 in. (+0.381 mm/-0.127mm) f-373size: up to & including 12 by 12 in = + 0.016 in f-2055 (+ 0.4mm) Larger than 12 by12 in & up to & including 24 by 24 in = + 0.018 in. (+ 0.45mm). Larger than 24 by 24 in = + 0.020 in. (+ 0.5mm) squareness: Max, 0.010 in (0.254mm) max. f-2055Quality of cut: 0.005 in (0.127mm) max. f-511

1. roppe fl ooring adhesives must be used for the roppe warranty to apply. rop375, rop435 or rop535u may be used depending on subfl oor type or condition.2. for interior use only.3. proper maintenance on a regular basis is essential to the appearance and the wear life of the tile.4. tiles may have slight color variations not detected at the factory. all tiles must be dry laid and examined for color acceptance before being installed (see installation brochure).5. Heavy sunlight penetration from direct or glass-fi ltered sources may cause fading.6. certain chemicals and various substances normally attack rubber formulations roppe’s rubber tile should not be used in commercial or residential kitchens and or areas where impregnation from cooking oils, vegetable fats, etc., is likely to occur. if any particular chemicals or substances are going to be present in the environment, adequate testing should be done in advance to ensure suitability for that application.7. certain oils and antioxidants sometimes used in the manufacture of rubber tires can cause staining and discoloration. in auto showrooms, for example, we recommend that tires not be allowed to come in direct contact with the tile; we suggest utilizing a pad made from carpet, Masonite®, scrap tile, etc. call factory for specifi c details.8. not recommended for use in hospital operating rooms or computer rooms; not a conductive tile.

f-925 resistance to short-term chemical exposure – When tested in accordance with test Method f 925, the rubber fl oor tile shall have no more than a slight change in surface dulling, surface attack, or staining when exposed to the following chemicals:

> White vinegar (5% acetic acid)> rubbing alcohol (70% isopropyl alcohol) > sodium hydroxide solution (5% naoH)> Hydrochloric acid solution (5% Hcl)> sulfuric acid solution (5% H2so4)> Household ammonia solution (5% nH4oH) > Household bleach (5.25% naocl)> disinfectant cleaner (5% active phenol)



prod

uc

t specific

atio

ns

991 sLate desiGndiMensions:size: 19-11/16" x 19-11/16" (50cm x 50cm)overall thickness: 1/8" (3.175mm)

pacKaGinG:no. per carton: 16Wt. per carton: 42 lbs. (19.05kg)sq. ft. per carton: 43 (3.99 sq. m)

984 stripe desiGndiMensions:size: 19-11/16" x 19-11/16" (50cm x 50cm)overall thickness: 1/8" (3.175mm)


983 randoM desiGndiMensions:size: 19-11/16" x 19-11/16" (50cm x 50cm)overall thickness: 1/8" (3.175mm)


982 cracKLe desiGndiMensions:size: 19-11/16" x 19-11/16" (50cm x 50cm)overall thickness: 1/8" (3.175mm)


953 WarninG tiLe desiGndesigned for use in areas such as stairwell landings to alert the visually impaired to approaching changes in elevation. it meets the guidelines of ansi a117.1 1986 section 4.27 detectable Warnings, and title 24.

diMensions:size: 24" x 24" (609.6mm x 609.6mm)overall thickness: 1/8" (3.175mm) 1/32" (1.27mm) w/out profile


996 raised circuLar VantaGe desiGn diMensions:size: 19-11/16" x 19-11/16" (50cm x 50cm)overall thickness: 5/32" (3.97mm) with profile 1/8" (3.175mm) w/out profile profile height: 3/64" (1.19mm)profile diameter: 1-3/32" (27.78mm)

pacKaGinG: no. per carton: 16Wt. per carton: 50 lbs. (22.68kg)sq. ft. per carton: 43 (3.99 sq. m)

994 raised sQuare desiGn diMensions:size: 19-11/16" x 19-11/16" (50cm x 50cm)overall thickness: 1/8" (3.175mm) w/out profile 9/64" (3.57mm) w/ profileprofile height: 1/32" (.79mm)profile width: 1-5/8" (41.28mm)

pacKaGinG: no. per carton: 16Wt. per carton: 49 lbs. (22.23kg)sq. ft. per carton: 43 (3.99 sq. m)

993 teXtured desiGndiMensions:size: 19-11/16" x 19-11/16" (50cm x 50cm)overall thickness: 1/8" (3.175mm)


LuG-BacK VantaGe desiGndiMensions:size: 19-11/16" x 19-11/16" (50cm x 50cm)thickness: 13/64" (5.16mm) with profile 11/64" (4.37mm) w/out profileprofile height: 1/32" (.79mm)profile diameter: 1-3/32" (27.78mm)


995 HaMMered desiGndiMensions:size: 19-11/16" x 19-11/16" (50cm x 50cm)overall thickness: 1/8" (3.175mm)


992 LoW profiLe raised circuLar desiGn diMensions:size: 19-11/16" x 19-11/16" (50cm x 50cm)overall thickness: 1/8" (3.175mm) 7/64" (2.78mm) w/out profile profile height: 1/64" (.4mm)profile diameter: 1-9/64" (28.97mm)


976/978/969/970 sMootH desiGndiMensions:size: 976/978: 12" x 12", (304.8mm x 304.8mm) 969/970: 19-11/16" x 19-11/16" (50cm x 50cm)overall thickness: 978/970: 1/8" (3.175mm) 976/969: 3/16" (4.76mm)

pacKaGinG:no. per carton: 976: 36 per carton, 978: 45 per carton, 969: 10 per carton, 970: 16 per cartonWt. per carton: 976: 54 lbs. (24.49kg), 978: 45 lbs. (20.41kg), 969: 40.5 lbs. (18.37kg), 970: 44 lbs. (19.95kg)sq. ft. per carton: 976: 36 (3.34 sq. m), 978: 45 (4.18 sq. m), 969: 27 (2.49 sq. m), 970: 43 (3.99 sq. m)

.080" 1/8"

151/64" 1/2" 29/32"

1.800.537.9527 | roppe.com




Lor

s

pro

du

ct

spec

ific

ati

on

s


warning tilearcHitects’ MateriaL specifications

all fl oors shown in the fi nish schedule or listed in this specifi cation for heavy traffi c areas shall be roppe’s WarninG ruBBer tiLe, manufactured by roppe corporation, fostoria, ohio. the tile shall be homogeneously constructed of fi rst quality resilient rubber compound, and shall conform to astM f-1344, class 1. the tile shall be 12" x 12" (304.8 mm x 304.8 mm) size, 1/8" (3.175 mm) gauge size, and in the color _______ (insert color) selected.

designer‘s choice® rubber fl oor tilearcHitects’ MateriaL specifications

all fl oors shown in the fi nish schedule or listed in this specifi cation for heavy traffi c areas shall be roppe’s _______(insert design name) ruBBer tiLe, manufactured by roppe corporation, fostoria, ohio. the tile shall be homogeneously constructed of fi rst quality resilient rubber compound, and shall conform to astM f-1344, class 1. the tile shall be ___________(insert size based on component) 1/8" (3.175mm) gauge and in the color _________ (insert color) selected.

spike/skate rubber fl ooringarcHitects’ MateriaL specifications

all fl oors shown in the fi nish schedule or listed in this specifi cation for heavy traffi c areas shall be roppe’s spiKe/sKate resistant ruBBer tiLe, manufactured by roppe corporation, fostoria, ohio. the tile shall be homogeneously constructed of fi rst-quality resilient rubber compound, and shall conform to astM f-1344, class 1. the tile shall be 19-11/16" x 19-11/16" (50cm x 50cm) size, 3/8" (9.00mm) gauge and in the color _________ (insert color) selected. Wt. per carton: 6.50 lbs., sQ. ft. per carton: 16.14 sq. ft/ctn.

tufl ex® titan recycled rubber tilearcHitects’ MateriaL specifications

roppe tufl ex® titan recycled rubber tile shown in the fi nish schedule or listed herein as roppe tufLeX titan recYcLed ruBBer tiLe shall be _________ (3/8" {9.00mm}) in nominal thickness, furnished by roppe corporation, fostoria, ohio. each shall be smooth and free from imperfections which detract from its appearance, and contain no asbestos fi ber. tufl ex titan recycled rubber tile shall be __________ (27" x 27" {685.8mm x 685.8mm} square tile and/or 27" x 27" nominal {609.6mm x 609.6mm} inter-Locking tiles), and in the color __________ (list color) selected.

tufl ex® spartus recycled rubber tilearcHitects’ MateriaL specifications

roppe tufl ex® spartus recycled rubber tile shown in the fi nish schedule or listed herein as roppe tufLeX spartus recYcLed ruBBer tiLe shall be _________ (3/8" {9.00mm}) in nominal thickness, furnished by roppe corporation, fostoria, ohio. each shall be smooth and free from imperfections which detract from its appearance, and contain no asbestos fi ber. tufl ex spartus recycled rubber tile shall be __________ (27" x 27" {685.8mm x 685.8mm} square tile and/or 27" x 27" nominal {609.6mm x 609.6mm} inter-Locking tiles), and in the color __________ (list color) selected.

recoil fi tness fl ooringarcHitects’ MateriaL specifications

roppe recoil rubber fitness flooring shown in the fi nish schedule or listed herein as roppe recoiL fitness fLoorinG shall be _________ (5/32" {4.00mm}, 1/4" {6.00mm}, 3/8" {9.00mm} or 1/2" {12.00mm}) in nominal thickness, furnished by roppe corporation, fostoria, ohio. each shall be homogeneous in construction and shall be smooth and free from imperfections which detract from its appearance, and contain no asbestos fi ber. rubber flooring shall be __________ (36" x 36" nominal {914.4mm x 914.4mm} square tile, 36" x 36" nominal {914.4mm x 914.4mm} inter-Locking tiles or 48" {1.22m} nominal in width by 49.5 feet {15.09m} nominal in length in rolls), and in the color __________ (list color) selected and color chip percentage _____ (all black {no epdM color chip} or 10%, 15% or 20% - 90% epdM color chip) stated.

non-vulcanized rop-cord rubber fl ooringarcHitects’ MateriaL specifications

all fl oors shown in the fi nish schedule or listed in this specifi cation for heavy traffi c area shall be roppe non-VuLcanized rop-cord as furnished by roppe corporation, fostoria, ohio. rop-cord non-Vulcanized tile shall be homogenously constructed of select reclaimed commercial tile components, reinforced with a polyester non-woven fabric bonded to a thin adhesive layer. tiles shall be 3/8" nominal thickness, shall conform to industry standards and shall contain no asbestos fi ber. floor covering shall be 12" x 12" (304.8mm x 308.4mm) tiles, and in the color _________ selected (insert color name and number selected).

vulcanized rop-cord rubber fl ooringarcHitects’ MateriaL specifications

all fl oors shown in the fi nish schedule or listed in this specifi cation for heavy traffi c area shall be roppe VuLcanized rop-cord as furnished by roppe corporation, fostoria, ohio. rop-cord Vulcanized tile shall be homogenously constructed of select reclaimed commercial tile components, reinforced with a polyester non-woven fabric bonded to a thin adhesive layer. tiles shall be 3/8" nominal thickness, shall conform to industry standards and shall contain no asbestos fi ber. floor covering shall be 12" x 12" (304.8mm x 308.4mm) tiles, and in the color _________ selected (insert color name and number selected).

fi esta® tilearcHitects’ MateriaL specifications

all fl oors shown in the fi nish schedule or listed in this specifi cation for heavy traffi c areas shall be roppe’s ______________ (insert color name and number) fiesta® ruBBer tiLe, manufactured by roppe corporation, fostoria, ohio. the tile shall be homogeneously constructed of fi rst-quality resilient rubber compound and shall conform to astM f-1344, class 1. the tile shall be ______________ (19-11/16" x 19-11/16" {50cm x 50cm} standard size or 12" x 12" {304.8mm x 304.8mm} by special order in textured or Hammered design only) and in the color selected.

safetcork® fi esta® rubber fl oor tilearcHitects’ MateriaL specifications

all tile fl oors shown in the fi nish schedule or listed in this specifi cation as rubber tile fl ooring shall be roppe safetcorK® fiesta® ruBBer tiLe, manufactured by roppe corporation, fostoria, ohio. the tile shall conform to astM f-1344, class 1. the tile shall be______ (1/8" {3.175mm}) thick and size______ (19-11/16" x 19-11/16" {50cm x 50cm}). the color shall be______(insert color name & number).



prod

uc

t specific

atio

ns

north coast solid vinyl tilespecification datatype: . . . . . . . . . . . . . . . . . . . . . . . Vinylconstruction: . . . . . . . . . . . . . . . . LaminatedWear layer thickness: . . . . . . . . . . 0.040" (1.02mm) minimumuse:. . . . . . . . . . . . . . . . . . . . . . . . commercial, residentialabrasion: . . . . . . . . . . . . . . . . . . . astM d-3389 (H-18 calibrau, 500g/load) Wt. loss g/1000 cycles less than .15gsizes:. . . . . . . . . . . . . . . . . . . . . . . 3" x 36" (76.2mm x 91.4cm) 12" x 12" (304.8mm x 304.8mm) 18" x 18" (457.2mm x 457.2mm)edging: . . . . . . . . . . . . . . . . . . . . . straight or beveledthickness: . . . . . . . . . . . . . . . . . . . 1/8" (3.175mm) specific gravity: . . . . . . . . . . . . . . 1.41Weight lb./sq. ft.: . . . . . . . . . . . . . 0.92Hardness, shore a:. . . . . . . . . . . . 95-96Modulus, 10% psi: . . . . . . . . . . . . 1000-1200tensile strength, psi:. . . . . . . . . . . 2300-2500Maximum static load, psi: . . . . . . 300fire resistance: . . . . . . . . . . . . . . . class 1 (e-648 radiant panel test)slip resistance: . . . . . . . . . . . . . . . rated .52 static coefficient of friction, James Machine, dry leatherLight stability: . . . . . . . . . . . . . . . . excellentstain and chemical resistance: . . . excellent

easily maintained – refer to maintenance instructions.

north coast collection® solid vinyl tilearcHitects’ MateriaL specifications

roppe north coast collection flooring shown in the finish schedule or listed herein as Roppe _____ (insert design name) SOLID VINYL TILE shall be Roppe’s 1/8" (3.175mm) nominal thickness. The tile shall be constructed of first quality laminated PVC, and shall be free from imperfections which detract from its appearance. The tile shall conform fully to ASTM F-1700, Class III, Type B furnished by Roppe Corporation, Fostoria, Ohio. All vinyl tile shall be of the _________ style (specify pattern), ________ (straight or beveled edge) and of 1/8" (3.175mm) thickness. The tile shall be ____________ (3" x 36" {76.2mm x 914.4mm} planks and 12" x 12" {304.8mm x 304.8mm} and 18" x 18" {457.2mm x 457.2mm} square tiles) and in the __________ (insert color) color selected.

product specificationssize: 3" x 36" (76.2mm x 91.4cm) 12" x 12" (304.8mm x 304.8mm) 18" x 18" (457.2mm x 457.2mm)thickness: 1/8" (3.175mm)no. per carton: 60 – 3" x 36" 45 – 12" x 12" 20 – 18" x 18"Wt. per carton: 42 lbs. (19.05kg)

sq. ft. per carton: 45 (4.18 sq. m)

northern timbers premium vinyl wood plankarcHitects’ MateriaL specifications

Roppe Northern Timbers manufactured by Roppe, Fostoria, OH 44830. Roppe Northern Timbers shall be constructed of first quality materials and shall be free from imperfections. Tile shall be .120" (3 mm) gauge and 4" x 36" (101.6 mm x 914.4 mm) in size, _____________ color (insert color) and style stated. Tile shall conform to Federal Specification ASTM F 1700 Solid Vinyl Floor Tile, Class III and shall meet Class 1 NFPA Life Safety Code. Roppe Northern Timbers must be installed using ROP360 Acrylic Tile & Stair Tread Adhesive or Roppe’s 535U “Universal” Urethane Enhanced Epoxy in accordance with the manufacturer installation instructions.

northern timbers premium vinyl wood plank – loose-layarcHitects’ MateriaL specifications

Roppe Northern Timbers manufactured by Roppe, Fostoria, OH 44830. Roppe Northern Timbers shall be constructed of first quality materials and shall be free from imperfections. Tile shall be .120" (3 mm) gauge and 6" x 48" (152.4 mm x 1,371.6 mm) in size, _____________ color (insert color) and style stated. Tile shall conform to Federal Specification ASTM F 1700 Solid Vinyl Floor Tile, Class III and shall meet Class 1 NFPA Life Safety Code. Roppe Northern Timbers must be installed in accordance with the manufacturer installation instructions.

northern leathers premium vinyl leather tilearcHitects’ MateriaL specifications

Roppe Northern Leathers manufactured by Roppe, Fostoria OH 44830. Roppe Northern Leathers shall be constructed of first quality materials and shall be free from imperfections. Tile shall be .120" (3 mm) gauge and 18" x 18" (457.2 mm x 457.2 mm) in size, _____________ color (insert color) and style stated. Tile shall conform to Federal Specification ASTM F 1700 Solid Vinyl Floor Tile, Class III and shall meet Class 1 NFPA Life Safety Code. Roppe Northern Leathers must be installed using Roppe’s ROP360 Acrylic Tile & Stair Tread Adhesive or Roppe’s 535U “Universal” Urethane Enhanced Epoxy in accordance with the manufacturer installation instructions.

safetcork® vinyl tilearcHitects’ MateriaL specifications

roppe safetcork® Vinyl tile shown in the finish schedule or listed herein as Roppe _____ (insert design name {SAFETCORK OR SAFETCORK OPTIONS}) VINYL TILE shall be 0.080" (2 mm) in nominal thickness. The solid vinyl tile should conform fully to the requirements of Standard Specifications Type ASTM F 1700, Specification for Solid Vinyl Tile: Class I, Type A; Federal Specification SS-T-312B, Type III furnished by Roppe Corporation, Fostoria, Ohio. Each shall be constructed of first-quality materials and shall be smooth and free from imperfections which detract from its appearance, and contain no asbestos fiber. Solid Vinyl tile shall be __________ (12" x 12" {304.8mm x 304.8mm}, 24" x 24" {609.6mm x 609.6mm} or 36" x 36" {914.4mm x 914.4mm}) in size and in the color __________ stated and in either _______ (insert Straight or Pre-Grooved) Edge.

1.800.537.9527 | roppe.com




Lor

s

pro

du

ct

spec

ific

ati

on

s


rubber stair treadsarcHitects’ MateriaL specifications

All stair treads indicated in the fi nish schedule or otherwise listed in this specifi cation shall be MOLDED RUBBER STAIR TREADS, manufac-tured by Roppe Corporation, Fostoria, Ohio. The treads shall be homo-geneously constructed of fi rst-quality resilient rubber compound and the color (and marbleization, if applicable) shall extend throughout the thickness of the tread. All treads shall be free from objectionable odors, blisters, cracks and other imperfections which will detract from the serviceability and appearance of the treads. Stair treads shall conform to ASTM F-2169, Type TS, Composition A, Types 1, 2 and 4. The molded rubber stair treads shall be type ______________ (insert number and name) and shall be ______________ (insert thickness). They shall have ______________ (round or square) nosing and a length of ______________ [72" (1.83m) maximum standard, or special orders up to 9 ft. (2.73m) (styles #30 and #98 only)].

The color shall be ______________ (specify by number and name).

product specifi cationsAll product dimension measurements are nominal in accordance with ASTM standards.

esd static dissipative control solid vinyl tilearcHitects’ MateriaL specifications

The solid, homogeneous ESD Static Dissipative Control Solid Vinyl Tile shown in the fi nish schedule or listed herein shall be Roppe ESD DISSIPATIVE STATIC CONTROL FLOORING as manufactured by Roppe Corporation, Fostoria, Ohio. It shall be constructed of fi rst-quality materials and shall be smooth and free from imperfections which detract from its appearance. The ESD Static Control solid vinyl tile, Dissipative, shall conform to ASTM F-1700, Class 1, Type A. The resistance of the tile will be higher than the average of 1,000,000 ohms and less than the average of 100,000,000 ohms as tested in accordance with NFPA 99 2-6.3.8, ASTM F-150, UL 779, and ANSI/ESD S7.1.The tile shall be 1/8" (3.175mm) in thickness and of size _______ (specify 12" x12" {304.8mm x 304.8mm}, 24" x 24" {609.6mm x 609.6mm}, or 36" x 36" {914.4mm x 914.4mm}) and in color ______ (specify color number and name). {Note: For specifi cations in areas where the installation is to be heat welded, state as follows: “The tile shall be formulated and pre-grooved for Roppe Unitized Installation.”}

*Roppe ROP605 or ROP604 ESD adhesive must be used with this product. Roppe vinyl welding beads, .160" in diameter, are available in matching colors.

product specificationssize: 12" x 12" (304.8mm x 304.8mm) 24" x 24" (61cm x 61cm) 36" x 36" (91.4cm x 91.4cm)

thickness: 1/8" (3.175mm)

no. per carton: 45 – 12" x 12" 14 – 24" x 24" 6 – 36" x 36"

Wt. per carton: 54 lbs. – 12" x 12" 63 lbs. – 24" x 24" 43 lbs. – 36" x 36"

sq. ft. per carton: 45 (4.18 sq. m)

esd rubber tilearcHitects’ MateriaL specifications

Roppe ESD Rubber Tile manufactured by Roppe, Fostoria, OH 44830. Roppe ESD Rubber Tile shall be constructed of fi rst-quality materials and shall be free from imperfections. Tile shall be Static Dissipative Rubber Tile. Tile shall be .080" gauge and 24" x 24" in size, _____________ color (insert color) and style stated. Tile shall conform to Federal Specifi cation ASTM F 1344 Rubber Floor Tile and shall meet Class 1 NFPA Life Safety Code. (Static Dissipative tile shall meet the electrical resistance requirements of NFPA 99 in effect at the time of purchase. ESD Rubber tiles shall have an average electrical resistance of 1.0 x 106 to 1.0 x 109 ohms when measured according to NFPA 99 or ASTM F 150.) Roppe ESD Rubber Tile must be installed using Roppe’s 604 Acrylic ESD Adhesive or Roppe’s 605 Two-Part ESD Epoxy in accordance with the manufacturer installation instructions.

esd static conductive control solid vinyl tilearcHitects’ MateriaL specifications

The solid, homogeneous ESD Conductive Static Control Solid Vinyl Tile shown in the fi nish schedule or listed herein shall be Roppe ESD CONDUCTIVE STATIC CONTROL FLOORING as manufactured by Roppe Corporation, Fostoria, Ohio. It shall be constructed of fi rst-quality materials and shall be smooth and free from imperfections which detract from its appearance. The ESD Static Control solid vinyl tile, Conductive, shall conform to ASTM F-1700, Class 1, Type A. The resistance of the ESD Conductive Static Control Flooring shall be less than an average of 1,000,000 ohms and shall be more than an average of 25,000 ohms as tested in accordance with NFPA 99 2-6.3.8, ASTM F-150, UL 779, and ANSI/ESD S7.1 at 10 volts or 100 volts. The tile shall be 1/8" (3.175mm) in thickness and of size _______ (specify 12" x 12" {304.8mm x 304.8mm}, 24" x 24" {609.6mm x 609.6mm}, or 36" x 36" {914.4mm x 914.4mm}) and in color ______ (specify color number and name). {Note: For specifi cations in areas where the installation is to be heat welded, state as follows: “The tile shall be formulated and pre-grooved for Roppe Unitized Installation.”}

*Roppe ROP605 or ROP604 ESD adhesive must be used with this product. Roppe vinyl welding beads, .160" in diameter, are available in matching colors.

1.800.537.9527 | roppe.com


abrasive strip design & smooth design rubber stair treadsarcHitects’ MateriaL specificationsall floors shown in the finish schedule or listed in this specification shall be _______ (1/8" {3.175mm}, 3/16" {4.76mm} or 1/4" {6.35mm}) nominal thickness shall conform to industry standards and shall contain no asbestos fiber. abrasive strip design & smooth design rubber stair treads shall be ____ (72" {1.83m}) in length and in the _________ color shade selected in either square or round nose.

rubber stair treads compliance guidePart Design Nose Type ADA - ADA - Static Coefficient NFPA & ASTM ANSI A117.1- California Title 24, Relief Cut Tapered Nose Stair Treads of Friction (COF) (See below for details) 2003 (See below Section 3306(r) Nose for details) (See below for details)

30 Diamond Square C C C C A Y Y

31 Diamond Round C C C A

40 Heavy-Duty Abrasive Strip Square C C C C

41 Heavy-Duty Abrasive Strip Round C C C C

50 Light-Duty Abrasive Strip Square C C C C

51 Light-Duty Abrasive Strip Round C C C C

60 Heavy-Duty Smooth Square C C C A

61 Heavy-Duty Smooth Round C C C A

70 Light-Duty Smooth Square C C C A

71 Light-Duty Smooth Round C C C A

80 Light-Duty Ribbed Square C C C A

81 Light-Duty Ribbed Round C C C A

92 Low Profile Raised Circular Design Square C C C A

93 Textured Design Square C C C A

94 Raised Square Design Square C C C A

95 Hammered Design Square C C C A

96 Raised Circular Vantage with Riser Square C C C C A Y Y

97 Raised Circular Vantage with

Extended Depth Square C C C C A Y Y

98 Raised Circular Vantage without Riser Square C C C C A Y Y

A = Style available with abrasive steps (special order). C = Meets compliance standards. Y = Style available.

raised and smooth design rubber stair treadsarcHitects’ MateriaL specificationsall floors shown in the finish schedule or listed in this specification shall be roppe _______(profile number) raised desiGn ruBBer stair treads as furnished by roppe corporation, fostoria, ohio. roppe raised design rubber stair treads shall be homogeneous in construction of first quality materials, properly vulcanized, and shall be smooth and free of imperfections which detract from its appear-ance and contain no asbestos fiber. the rubber stair tread shall conform fully to all the requirements of standard specification astM f-2169, type ts. rubber stair tread shall be _____ (1/8" {3.175mm}, 3/16" {4.76mm}, 13/64" {5.15mm} or 1/4" {6.35mm}) nominal thick-ness shall conform to industry standards and shall contain no asbestos fiber. raised design rubber stair treads shall be 72" (1.83m) in length, or up to 9' (2.73m) maximum standard in style #30 diamond square nose, #93 textured design and #98 raised circular Vantage design tread without riser, and in the _________ color shade selected in either square or round nose.

1.800.537.9527 | roppe.com


prod

uc

t specific

atio

ns



Lor

s

pro

du

ct

spec

ific

ati

on

s



fi esta® rubber stair treadsarcHitects’ MateriaL specificationsall fl oors shown in the fi nish schedule or listed in this specifi cation for heavy traffi c area shall be roppe fiesta® ruBBer stair tread as furnished by roppe corporation, fostoria, ohio. roppe fiesta rubber stair treads shall be homogeneous in construction of fi rst quality materials, properly vulcanized, and shall be smooth and free of imperfections which detract from its appearance and contain no asbestos fi ber. the fiesta rubber stair tread shall conform fully to all the requirements of standard specifi cation astM f-2169, type ts, class 2 (patterned), Group 1 (abrasive) and Group 2 (contrast for visually impaired). the fiesta molded rubber stair treads shall be _______ (insert name and number) and shall be _____ in thickness (insert thickness). they shall have square nosing and a length of ______ (insert length - 36" {.91m}, 42" {1.07m}, 48" {1.22m}, 54" {1.37m}, 60" {1.52m}, 72 {1.83m}, or special order up to 108" {2.73m} for style #98 only). the color shall be _______ (specify by name and number).

safetcork® rubber stair treadsarcHitects’ MateriaL specificationsall fl oors shown in the fi nish schedule or listed in this specifi cation for heavy traffi c area shall be roppe safetcorK® ruBBer stair tread as furnished by roppe corporation, fostoria, ohio. roppe safetcork rubber stair treads shall be homogeneous in construction of fi rst qual-ity materials, properly vulcanized, and shall be smooth and free of imperfections which detract from its appearance and contain no asbestos fi ber. the safetcork rubber stair tread shall conform fully to all the requirements of standard specifi cation astM f-2169, type ts, class 2 (patterned), Group 1 (abrasive) and Group 2 (contrast for visually impaired). the safetcork molded rubber stair treads shall be_______ (insert name and number) and shall be _____ in thickness (insert thickness). they shall have square nosing and a length of ______ (insert length - 36" {.91m}, 42" {1.07m}, 48" {1.22m}, 54" {1.37m}, 60" {1.52m}, 72" {1.83m}, or special order up to 108" {2.73m} for style #98 only). the color shall be _______ (specify by name and number).

vinyl stair treads

arcHitects’ MateriaL specificationsall stair treads listed in the fi nished schedule or listed in the specifi cation as Vinyl stair treads shall be roppe VinYL stair treads as furnished by roppe corporation, fostoria, ohio. the treads shall be homogeneously constructed of fi rst-quality raw material, and shall be smooth and free of imperfections which detract from its appearance and contain no asbestos fi ber. the treads shall conform fully with astM f-2169; standard specifi cation for resilient stair treads: type tV; class 2; Group 1 & 2. the vinyl treads shall be type ________ (insert number and name) and shall be 5/32" {3.968mm}, 1/4" {6.35mm} nominal thickness. they shall be _____ (specify round or square nose), and nominal length of ______ (specify length) in the color selected (specify color).

metal stair treads

arcHitects’ MateriaL specificationsall aluminum treads shown in the fi nish schedule or listed in this specifi cation for heavy traffi c area shall be roppe MetaL stair treads as furnished by roppe corporation, fostoria, ohio. roppe Metal stair treads aluminum base shall be constructed of heat treated exterior grade aluminum 6063t3 and fi lled with a uV stable, chemical-resistant, closed-cell, anti-slip epoxy coating combined with mineral abrasive grits that are uniform throughout providing anti-slip properties and construction of fi rst quality materials, and shall be smooth and free of imperfections which detract from its appearance and contain no asbestos fi ber. roppe Metal stair treads shall be .250" (6.35 mm) nominal thickness, shall conform to industry standards. roppe Metal stair treads shall be .250" (6.35mm) in nominal thickness, ___ (mm) in nominal depth, ______ (mm) in nominal length and in either single color or color combinations __________ stated.

3.0" 10.0" 10.0" 10.0" 3.0"36.0"

2" 11.0" 11.0" 11.0" 11.0"48.0"

2"

11⁄2"

15⁄8"

9.0"

6.14"

7.00"0.22"

0.75"

4.00"

1.19

"

0.22"

1.02"

9" METAL TREAD

11" METAL TREAD

7" METAL PLATE

4" METAL NOSING

1.800.537.9527 | roppe.com


prod

uc

t specific

atio

ns

* abrasive strips can be added to rubber treads: #30, #31, #60, #61, #80, #81, #92, #93, #94, #95, #96, #97 and #98.

textured profile

7/32"13/64"19⁄16"

125⁄8"

#93 teXtured desiGn treads*Length: 36" (.91m) to 108" (2.73m)depth: 12-5/8" (314.3mm) nominal from inside of nose.thickness: 13/64" (5.15mm) tapering to 7/32" (5.5mm) nominal. nose Length: 1-9/16" (39.70mm) nominal nose thickness: 5/32" (3.97mm) nominaltapered nose: Yesrelief cut nose: no

pacKaGinG: no. per carton: 6 treads per carton up to 72" (1.83m) nominal, four treads per carton for lengths greater than six feetWt. per linear ft.: 1.7 lbs (2.51kg per linear meter)

low profile

1/8"3/16"19⁄16"

121⁄2"

#92 LoW profiLe raised circuLar desiGn*Length: 36" (.91m) to 72" (1.83m) depth: 12-1/2" (311.2mm) nominal from inside of nose.thickness: 3/16" (4.76mm) tapering to 1/8" (3.175mm) nominal nose Length: 1-9/16" (39.70mm) nominal nose thickness: 9/64" (3.57mm) nominal tapered nose: norelief cut nose: no

pacKaGinG: no. per carton: 6Wt. per linear ft.: 1.5 lbs (2.24kg per linear meter)

hammered profile

5/64"1 9⁄16"

20 5⁄8"

#95 HaMMered sQuare nose one-piece tread and riser*Length: 36" (.91m) to 72" (1.83m) depth: 20-5/8" (520.7mm) nominal from inside of nosethickness: 13/64" (5.16mm) stair tread, riser tapers to 5/64" (1.98mm) nominal nose Length: 1-9/16" (39.70mm) nominal nose thickness: 1/8" (3.18mm) nominaltapered nose: Yesrelief cut nose: no


not available in 9 foot (2.73m) lengthsall lengths are nominal

5⁄64"19⁄16"

1⁄4"

207⁄16"

15⁄64"3⁄64" raised disk

rubber raised circular vantage design#96 raised circuLar VantaGe desiGn

one-piece tread and riser*Length: 36" (.91m) to 108" (2.73m) depth: 20-7/16" (520.7mm) nominal from inside of nose to 5/64" (1.98mm) nominalthickness: 1/4" (6.35mm) nominal tread portion, riser tapers nose Length: 1-9/16" (39.70mm) nominal nose thickness: 3/16" (4.76mm) nominal tapered nose: Yesrelief cut nose: Yes


#97 eXtended LenGtH VantaGe desiGn* Length: 36" (.91m) to 72" (1.83m) depth: 15" (381mm) nominal from inside of nose.thickness: 1/4" (6.35mm) tapering to 3/32" (2.41mm) nominalnose Length: 1-9/16" (39.70mm) nominal nose thickness: 3/16" (4.76mm) nominal tapered nose: Yesrelief cut nose: Yes

pacKaGinG: no. per carton: 6Wt. per linear ft.: 2 lbs (2.98kg per linear meter)

3⁄32"19⁄16"

1⁄4"

15"

15⁄64"3⁄64" raised disk

#98 VantaGe profiLe W/o riser*Length: 36" (.91m) to 108" (2.73m)depth: 12-1/16" (304.8mm) nominal from inside of nose.thickness: 3/16" (4.76mm) tapering to 1/8" (3.175mm) nominalnose Length: 1-9/16" (39.70mm) nominal nose thickness: 1/8" (3.18mm) nominal tapered nose: Yesrelief cut nose: Yes

pacKaGinG: no. per carton: 6 treads per carton up to 72" (1.83m) nominal four treads per carton for lengths greater than six feetWt. per linear ft.: 2 lbs (2.98kg per linear meter)

3⁄16"19⁄16"

1⁄8"

121⁄16"

trim Mark

1.800.537.9527 | roppe.com




Lor

s



abrasive strip

1⁄32" raised square

1⁄4"

15⁄8"

1⁄8"19⁄16"

125/16"

#94 raised sQuare desiGn* Length: 36" (.91m) to 72" (1.83m) depth: 12-5/16" (311.2mm) nominal from inside of nose.thickness: 1/4" (6.35mm) tapering to 1/8" (3.175mm) nominal nose Length: 1-9/16" (39.70mm) nominal nose thickness: 1/4" (6.35mm) nominal tapered nose: no relief cut nose: no

pacKaGinG:no. per carton: 6Wt per linear ft.: 2.2 lbs (3.28kg per linear meter)

raised square#30 sQuare nose desiGn treads*Length: 36" (.91 m) to 108" (2.73m)depth: 12-1/16" (304.8mm) nominal from inside of nosethickness: 3/16" tapering to 1/8" (4.76mm to 3.175mm) nominalnose Length: 1-9/16" (39.70mm) nominalnose thickness: 1/8" (3.175mm) nominaltapered nose: Yesrelief cut nose: Yes

pacKaGinG: no. per carton: 6 per carton up to 72" (1.83 m) nominal, 4 treads per carton for lengths greater than six feetWt. per linear ft: 2.25 lbs (3.35kg per linear meter)

#31 round nose desiGn treads* Length: 36" (.91 m) to 72" (1.83m)depth: 12-5/16" (304.8mm) nominal from inside of nose.thickness: 1/4" tapering to 3/16" (6.35mm to 4.76mm) nominalnose Length: 1-3/8" (34.93mm) nominal nose thickness: 7/64" (2.78mm) nominaltapered nose: norelief cut nose: no

pacKaGinG: no. per carton: 6Wt. per linear ft: 2.25 lbs (3.35kg per linear meter)

diamond

3⁄16"13⁄8"

1⁄4"

125/16"

3⁄4" radius

#31 diaMond rd nose1⁄8"

19⁄16"

3⁄16"

121/16"

#30 diaMond sQ nose

trim mark on back to cut off where 3/16" tile will be fl ush.

#40 & #41 HeaVY-dutY aBrasiVe strip desiGn treadsLength: 36" (.91m) to 72" (1.83m) nominaldepth: 12-5/16" (311.2m) nominal from inside of nosethickness: 1/4" (6.35mm) tapering to 3/16" (4.76mm) nominalnose Length: #40 1-9/16" (39.70mm) nominal, #41 1-3/8" (34.93mm) nominalnose thickness: 3/16" (4.76mm) nominaltapered nose: norelief cut nose: no

#50 & #51 LiGHt-dutY aBrasiVe strip desiGn treadsLength: 36" (.91m) to 72" (1.83m) nominaldepth: 12-5/16" (311.2m) nominal from inside of nosethickness: 3/16" (4.76mm) tapering to 1/8" (3.175mm) nominalnose Length: #50 1-9/16" (39.70mm) nominal, #51 1-3/8" (34.93mm) nominalnose thickness: 1/8" (3.175mm) nominal tapered nose: norelief cut nose: no

pacKaGinG: no. per carton: Heavy-duty: 6 Light-duty: 10Wt. per linear ft.: Heavy-duty: 2.5 lbs. (3.73kg per linear meter) Light-duty: 1.5 lbs. (2.24kg per linear meter)

3⁄4" radius

1⁄8"

13⁄8"

3⁄16"

125/16"

#51 LiGHt-dutY rd nose

3⁄4" radius

3⁄16"

13⁄8"

1⁄4"

125/16"

#41 HeaVY-dutY rd nose

3⁄16"

19⁄16"

1⁄4"

125/16"

#40 HeaVY-dutY sQ nose

1⁄8"

19⁄16"

3⁄16"

125/16"

#50 LiGHt-dutY sQ nose

1.800.537.9527 | roppe.com


pro

du

ct

spec

ific

ati

on

s

light-duty rib#16 & #17 – LiGHt-dutY riB treadLength: 42" (1.07m), 48" (1.22m) or 72" (1.83m)depth: 12-13/32" (315.12mm)thickness: 5/32" (3.96mm) to 5/64" (1.984mm)

pacKaGinG:no. per carton: 10Wt. per ft.: 1.30 lb. (0.59kg per m)

heavy-duty rib#18 & #19 – HeaVY-dutY riB treadLength: 42" (1.07m), 48" (1.22m) or 72" (1.83m)depth: 12-1/2" (317.5mm)thickness: 1/4" (6.35mm) to 1/8" (3.175mm)

pacKaGinG:no. per carton: 6Wt. per ft.: 1.80 lbs. (0.816kg per m)

vinyl stair treads

#16 LiGHt-dutY sQ nose



#19 HeaVY-dutY rd nose

12-13/32"

12-11/32"

12-1/2"

12-1/2"

5/64"

5/64"

1/8"

1/8"

5/32"

3/32"

15/64"

15/64"

2" 5/32"

5/32"5/32"29/32"

13/16"

2"

1/8"15/64"

2" 1/4"

1/4"1/4"

#60, #61 – ruBBer desiGn treads* Length: 36" (.91m) to 72" (1.83m) nominalDepth: 12-5/16" (304.8m) nominal from inside of noseThickness: 1/4" (6.35mm) tapering to 3/16" (4.76mm) nominal Nose Length: #60 1-9/16" (39.70mm) nominal, #61 1-3/8" (34.93mm) nominalNose Thickness: 3/16" (4.76mm) nominalTapered Nose: NoRelief Cut Nose: No

#70, #71 – LIGHT-DUTY SMOOTH RUBBER TREADSLength: 36" (.91m) to 72" (1.83m) nominalDepth: 12-3/8" (311.2m) nominal from inside of noseThickness: 1/8" (3.175mm) nominalNose Length: #70 1-9/16" (39.70mm) nominal, #71 1-3/8" (34.93mm) nominalNose Thickness: 1/8" (3.175mm) nominal Tapered Nose: NoRelief Cut Nose: No

smooth

3⁄4" radius

3⁄16"

125⁄16"

13⁄8"

1⁄4"#61 HeaVY-dutY rd nose

3⁄4" radius

1⁄8"

13⁄8"

1⁄8"

123⁄8"



3⁄16"

125⁄16"

19⁄16"

1⁄4"

#70 LiGHt-dutY sQ nose1⁄8"

123⁄8"

19⁄16"

1⁄8"

#80 LiGHt-dutY riB sQuare nose*Length: 36" (.91m) to 72" (1.83m) nominaldepth: 12-1/4" (311.2mm) nominal from inside of nosethickness: 1/8" (3.175mm) tapering to .080" (2.03mm) nominalLength: 1-9/16" (39.70mm) nominalnose thickness: 1/8" (3.18mm) nominaltapered nose: norelief cut nose: no

pacKaGinG:no. per carton: 10Wt. per linear ft.: 1.25lbs (1.87kg per linear meter)

#81 LiGHt-dutY riB round nose*Length: 36" (.91m) to 72" (1.83m) nominaldepth: 12-1/4" (311.2mm) nominal from inside of nosethickness: 1/8" (3.175mm) tapering to .080" (2.03mm) nominalnose Length: 1-3/8" (34.93mm) nominalnose thickness: 9/64" (3.58mm) nominaltapered nose: norelief cut nose: no

pacKaGinG:no. per carton: 10Wt per linear ft.: 1.25lbs (1.87kg per linear meter)

rib

#81 LiGHt-dutY riB rd nose

3⁄4" radius.080"

13⁄8"

1⁄8"

121⁄4"

#80 LiGHt-dutY riB sQ nose

.080"

121⁄4"

1⁄8"

19⁄16"

* abrasive strips can be added to rubber treads: #30, #31, #60, #61, #80, #81, #92, #93, #94, #95, #96, #97 and #98.

1.800.537.9527 | roppe.com


prod

uc

t specific

atio

ns


alphabase colors page 4

tufl ex® rubber flooring tiles for sports and commercial applications have been proven in the industry since 1957.tufl ex tiles are manufactured with a patented vulcanization process using

predominantly recycled rubber. square tiles are 27" x 27" x 3/8" thick, and

interlocking tiles are 27" x 27"

diMensions ruBBer fLoorinG features and Benefits:

pVc free.


available in 3 profi les: crackle, random and stripe. designed for high durability and ease of maintenance throughout the product life cycle.



available in solid colors only. all colors available at a single price point.

headingr e c Y c L e d r u B B e r t i L e

adhesive spread rates

ropecc epoxy caulking compound 25 L/f per 13.5oz cartridge50 to 60 L/f per Quart200 to 240 L/f per Gallon

rop215 Wall Base adhesive65 L/f per cartridge275 L/f Base per Gallon

rop220 pinnacle Wall Base adhesive65 L/f per cartridge275 L/f Base per Gallon

rop360 acrylic tile and stair tread adhesive125-300 s/f per Gallon

rop435 solvent free epoxy flooring adhesive125 to 245 s/f per Gallon

rop445 rop-cord adhesive70-75 s/f per Gallon

rop535u “universal” urethane enhanced epoxy enhanced epoxy adhesive.75 to 175 s/f per Gallon

rop604 acrylic esd adhesive125-185 s/f per Gallon

rop605 two-part esd epoxy125-150 s/f per Gallon

rop635 solvent-free Moisture-cured polyurethane adhesive75-100 s/f per Gallon

acrylic Latex caulkavailable in colors to match all products12Lf 1/4" bead

all coverages are approximate which can vary due to type of product, substrate, type

of installation and recommended trowel size. for more information go to roppe.com.


1.800.537.9527 | roppe.com


headingr e c Y c L e d r u B B e r t i L e

��

Mold Statement

Issues concerning mold and mildew are gaining increased attention from both residential and commer-cial property owners as well as the public at large. In virtually all situations, if there is a mold issue, there is an excessive moisture issue. In order to prevent, control, or remediate mold and mildew, one must first identify, evaluate, and eliminate the source of excessive moisture.

Prior to removing an existing resilient floor following the RFCI Recommended Work Practices for Re-moval of Resilient Floor Coverings (unless state or local law requires other measures) or installing a new floor, if there are visible indications of mold or mildew or the presence of a strong musty odor in the area where resilient flooring is to be removed or installed, the source of the problem should be identi-fied and corrected before proceeding with the flooring work. Visible signs of mold or mildew such as discoloration can indicate the presence of mold or mildew on the subfloor, on the underlayment, on the back of the flooring, and sometimes even on the floor surface. If mold or mildew is discovered during the removal or installation of resilient flooring, all flooring work should stop until the mold or mildew problem (and any related moisture problem) has been addressed. Before installing the new resilient flooring, make sure the underlayment and/or subfloor is allowed to thoroughly dry and that any residual effect of excessive moisture, mold or structural damage has been corrected.

To deal with mold and mildew issues, you should refer to the U.S. Environmental Protection Agency (EPA) guidelines that address mold and mildew. Depending on the mold or mildew condition present, those remediation options range from cleanup measures using gloves and biocide to hiring a profes-sional mold and mildew remediation contractor to address the condition. Resilient flooring, because it is relatively non-porous, allows any mold and mildew on the flooring surface to be easily cleaned. Remediation measures may require structural repairs such as replacing underlayment and/or subfloor contaminated with mold or mildew as a result of prolonged exposure to moisture.

The EPA mold guidelines are contained in two publications “A Brief Guide to Mold, Moisture and Your Home” (EPA 402-K-02-003) and “Mold Remediation in Schools and Commercial Buildings” (EPA 402-K-01 –001). Appendix B of the “Mold Remediation in Schools and Commercial Buildings” publication describes potential health effects from exposure to mold, such as allergic and asthma reactions and ir-ritation to eyes, skin, nose and throat. These publications can be located on EPA’s website at www.epa.gov/iaq/molds/

roppe products are warranted for a period of one (1) year from date of installation to be free of defects in material and workmanship on all first quality products. Limited Wear Warranty also applies to specific products for non-transit use, based by product design and installation purpose, if installed, maintained and used strictly in accordance with roppe’s written instructions and installed with the recommended roppe adhesive. refer to roppe product 10-part specification sheet before proceeding with installation. for any applications not listed, do not proceed with installation regardless of the circumstance. it is the flooring installer’s direct responsibility to inspect and loose lay the flooring in the room or area prior to installation to determine the proper layout and best overall appearance. flooring installer must inspect all material for manufacturing imperfections and irregularities prior to installation. all manufacturing imperfections or irregularities must be reported to the appropriate authority. any defective material will be replaced at no charge, if the defect is found prior to installation. roppe will not be liable for labor costs for material that is installed with manufacturing imperfections and irregularities. roppe reserves the right to inspect the manner and quality of installation of its

product claimed defective. in no event shall roppe be liable for incidental or consequential damages, even if some other provision of this Limited Warranty is unenforceable. roppe will not be liable for labor costs or lost profits resulting from the use of or inability to use the product.

roppe shall have no liability whatsoever to Buyer in the event the goods become defective if such defect is caused in whole or part by cuts, tears, vandalism, fire, willful destruction, damage from high heels, spiked footwear, improper installation, improper maintenance, subfloor and/or substrate irregularities, accidents, natural causes, or acts of God. products designated as “seconds”, “mill run”, “non-conforming”, not being of first quality, are sold as-is and roppe makes no warranties whatsoever, expressed or implied, with respect thereto, including warranties of merchantability or fitness for a particular use. these warranties are expressly in lieu of any other warranties expressed or implied. roppe products not designed for use in or near commercial kitchens. roppe products are not designed for outdoor installations, unless specifically noted.

contact roppe for limitations, exclusions and additional warranty details. or for 10-part specification sheets and warranty information, visit our Web site at roppe.com.

roppe corporation, u.s.a.1602 north union streetfostoria, ohio 44830-1158

1.800.537.9527419.435.8546fax: 419.435.1056

roppe.come-mail: [email protected]

all products1 - Y e a r L i M i t e d W a r r a n t Y

roppe is proud to be a member of the following organizations, committed to the advancement of excellence in their fields:

roppe is a member of the u.s. Green Building council, which promotes buildings that are environmentally responsible. Visit usgbc.com for details.

dedicated to protecting life and promoting health in our environments, both at work and home/community.

craftsman trained to stress attention to detail, respect for project specifications, and superior workmanship.

1.800.537.9527 | roppe.com

87WarrantY

diM

ensio

ns

Wa

rran

tY

©2011 roppe corporation paper Made in the usa | printed in the usa

Y11-671

roppe corporation, u.s.a.1602 north union streetfostoria, ohio 44830-1158

1.800.537.9527 | 419.435.8546fax: 419.435.1056roppe.come-mail: [email protected]

2 0 1 1 · table of contents 2 table of contents 4 color 9 fl ooring designer 10 ecoeffects ® 12...

Documents