154

REFERENCES

[1] A. Belvaux, C. Guilmain and P. Lafontaine, “Optimisation of the selection and use

of protections in numerical controlled substations. Application in Belgium”, in

CIRED 12th Int. Conf. on Electricity Distribution, Vol. 2, pp. 2.10/1 - 2.10/6, 17-

21 May 1993.

[2] A. G. Phadke and J. S. Thorp, “Computer Relaying for Power Systems,” Research

Studies Press Ltd, Taunton, England 1998.

[3] A. G. Phadke and S. H. Horowitz, “Adaptive Relaying,” IEEE Tractions on

Computer Applications in Power, Vol. 3, No. 3, pp. 47-51, July 1990.

[4] A. K. Jampala, S. S. Venkata and M. J. Damborg, “Adaptive Transmission

Protection concepts and computational issses,” IEEE Transactions on Power

Delivery, Vol. 4, No. 1, pp. 177-185, January 1989.

[5] A. Kumar and P. Hansen, “Digital bus-zone protection,” IEEE Computer

Applications in Power, Vol. 6, No. 4, pp. 29-34, October 1993.

[6] A. L. Janssen, M. J. M. van Riet, F. J. Volberda and I. Karakoc, “Improved

Reliability by Simplification of Sub Transmission Protection System”, In

Proceedings of IPEC 2007, 8th International Conference on Power Engineering,

pp. 476-481, Dec. 3-6, 2007.

[7] A. Mechraoui and D. W. P. Thomas, “A new blocking principle with phase and

earth fault detection during fast power swings for distance protection,” IEEE

Trans. Power Del., Vol. 10, No. 3, pp. 1242–1248, Jul. 1995.

[8] A. Mechraoui and D. W. P. Thomas, “A new principle for high resistance earth

fault detection during fast power swings for distance protection,” IEEE Trans.

Power Del., Vol. 12, No. 4, pp. 1452–1457, Oct. 1997.

[9] A. P. Apostolov, “High speed Peer-to-Peer communications based bus protection,”

in Proc. IEEE Power Eng. Soc. Winter Meet, Vol. 2, pp.693–698, 2001.

[10] A. R. Van C. Warrington, “Protective Relays: Their theory and practice,” Vol. 1,

Chapman & Hall Ltd, London, 1962.

155

[11] A. T. Johns, “New ultra high speed directional comparison technique for the

protection of EHV transmission lines,” Proc. Inst. Elect. Eng., Gen., Transm.

Distrib., Vol. 127, pp. 228–239, 1980.

[12] A. Wiszniewski, W. Rebizant, and L. Schiel, “Correction of current transformer

transient performance,” IEEE Transactions on Power Delivery, Vol. 23, No. 2, pp.

624–632, Apr. 2008.

[13] Ali Hooshyar and M. Sanaye-Pasand, “CT Saturation Detection Based on

Waveform Analysis Using a Variable-Length Window”, IEEE Transactions on

Power Delivery, Vol. 65, No. 3, pp. 2040- 2050, Jul. 2011.

[14] Application of Low Impedance 7SS601 Busbar Differential Protection, Siemens

PTD EA: Application of SIPROTEC Protection Relays, pp. 1-9, 2005.

[15] AREVA, “MiCOMho P443 fast multifunction distance protection”, AREVA T&D

Automation & Information Systems.

[16] A. Guzman, B. L. Qin and C. Labuschagne, “Reliable Busbar Protection With

Advanced Zone Selection”, IEEE Transactions on Power Delivery, Vol. 20, No. 2,

pp. 625-629, April 2005.

[17] A. I. Megahed, A. M. Moussa, and A. E. Bayoumy, “Usage of Wavelet Transform

in the Protection of Series-Compensated Transmission Lines”, IEEE Transactions

on Power Delivery, Vol. 21, No. 3, pp. 1213-1221, July 2006.

[18] B. R. Bhalja “Developments in Digital Protection of Transmission Lines” a Ph. D

thesis, 2007.

[19] B. Al-Fakhari and I. A. Elagtal, “A Unique Current Differential Based Algorithm

for Protection of Three-Winding Transformers and Busbars”, IEEE Power

Engineering Society Winter Meeting, Vol. 2, pp. 687-692, 2001.

[20] B. Bhalja and R. P. Maheshwari, “Protection Philosophies: Past, Present &

Future”, Electrical India, Vol. 47, No. 2, pp. 30-38, Feb. 2007.

[21] B. Bhalja and R. P. Maheshwari, “Trends in Adaptive Distance Protection of

Multi-terminal and Double-Circuit Lines”, Electric Power Components and

Systems, Vol. 34, No. 6, pp. 603-617, Jun. 2006.

156

[22] B. Bhalja and R. P. Maheshwari, “Wavelet Based Fault Classification Scheme for

Transmission Line Using SVM” Electric Power Components and Systems, Vol.

36, No. 10, pp. 1017-1030, October 2008.

[23] B. Bhalja, R. P. Maheshwari, and N. G. Chothani, “A Review on Busbar Protection

Philosophy: Past, Present and Future,” Journal of Institution of Engineers, India,

Vol. 91, pp. 1-16, Sept. 2010.

[24] B. R. Bhalja, R. P. Maheshwari and N. G. Chothani, “Protection and switchgear”,

Oxford University press, New Delhi, Sep. 2011.

[25] B. Bhalja, R.P. Maheshwari, and U. B. Parikh, “A New Digital relaying Scheme

for Parallel Transmission Line”, International Journal of Emerging Electric Power

Systems, Vol. 10, No. 3, pp. 1-22, 2009.

[26] B. Kasztenny and J. Cardenas, “New phase-segregated digital busbar protection

solutions”, 57th Annual Conference for Protective Relay Engineers, pp. 308-338,

30th Mar. to 1st Apr., 2004.

[27] B. Kasztenny, G. Brunello and L. Servov, “Digital Low Impedance Bus

Differential Protection: Review of Principles and Approaches”, GER 3984, GE

Power Management, Markham, Ontario, Canada, pp. 1-14, 1999.

[28] B. Kasztenny, G. Brunello and L. Servov, “Digital low-impedance bus differential

protection with reduced requirements for CTs,” in IEEE PES Transmission &

Distribution Conf. Vol. 2, pp. 703-708, 2001.

[29] B. Kasztenny and K. Kuras, “A New Algorithm for Digital Low-Impedance

Protection of Busbars”, Power Engineering Society Summer Meeting, Vol. 1, pp.

97 – 102, 2001.

[30] B. Mahamedi and J. G. Zhu, “A Novel Approach to Detect Symmetrical Faults

occurring During Power Swings by using Frequency Components of Instantaneous

Three-Phase Active Power,” IEEE Transactions on Power Delivery, Vol. 27, No.

3, pp. 1368- 1376, Jul. 2012.

[31] B. Ravikumar, D. Thukaram and H.P. Khincha, “Application of support vector

machines for fault diagnosis in power transmission system”, IET Generation

Transmission Distribution, Vol. 2, No. 1, pp. 119–130. Jan. 2008.

157

[32] B. Su, X. Dong, Y. Sun, B. R. J. Caunce, D. Tholomier, and A. Apostolov, “Fast

detector of symmetrical fault during power swing for distance relay,” in Proc.

IEEE Power Eng. Soc. General Meeting , pp. 604–609, 2005.

[33] B. W. Cable, L. J. Powell and R. L. Smith, “Application criteria for high speed bus

differential protection”, IEEE Transactions on Industry Applications, Vol. IA-19,

pp. 619-624, July/August 1983.

[34] B. Qin, A. Guzman and O. Edmud, “A New Method for Protection Zone Selection

in Microprocessor-Based Bus Relays,” IEEE Transactions on Power Delivery, Vol.

15, No. 3, pp. 876-887, July 2000.

[35] “Balancing and Frequency Control”, a technical document prepared by the NERC

resources subcommittee, Jan. 2011, on line available: www.nerc.com.

[36] Basic Busbar Protection by Reverse Interlocking, Siemens PTD EA: Application

of SIPROTEC Protection Relays, pp. 1-2, 2005.

[37] Bus Differential Relaying: Methods & Application, Blasler Electric Company,

Model No: 618/654-2341, pp. 1-57, 2005.

[38] Bus Protection for 400 kV and 275 kV Double Busbar Switching Stations,

National Grid Technical Specification NGTS 3.6.3, Issue 3, pp. 1-19, December

1996.

[39] C. Fernandez, “An impedance-based CT saturation detection algorithm for bus-bar

differential protection,” IEEE Transactions on Power Delivery, Vol. 16, No. 4, pp.

468–472, Oct. 2001.

[40] C. L. Fortescue, “Method of symmetrical coordinates applied to the solution of

polyphase networks,” Transaction on American Institute of Electrical Engineers

(AIEE), Vol. 7, No. 2, pp. 1027–1140, 1918.

[41] C. Li-jun, “The research of the sampling method for CT saturation for numerical

busbar protection”, In Proceedings of 8th IEE International Conference on

Developments in Power System Protection, Vol. 1, pp. 384-386, April 2004.

[42] C. Pang and M. Kezunovic, “Fast Distance Relay Scheme for Detecting

Symmetrical Fault during Power Swing,” IEEE Trans. Power Del., Vol. 25, No. 4,

pp. 2205–2212, Oct. 2010.

158

[43] C. R. Mason, “The Art and Science of Protective Relaying,” Wiley Eastern Ltd;

New Delhi, 1987.

[44] C. S. Yu , “Detection and correction of saturated current transformer

measurements using decaying DC components,” IEEE Transactions on Power

Delivery, Vol. 25, No. 3, pp. 1340–1347, Jul. 2010.

[45] C. Chang, and C.J. Lin, “LIBSVM A Library for Support Vector Machines”,

Online available: www.csie.ntu.edu.tw/~cjlin/libsvm/

[46] C. W. Hsu, C. C. Chang, and C. J. Lin, “A Practical Guide to Support Vector

Classification”, Last updated: April 15, 2010. Online available:

www.csie.ntu.edu.tw/~cjlin/papers/guide/guide.pdf

[47] D. C. Yu , J . C . Cummins, Z. Wang, H. J. Yoon, and L. A. Kojovic, “Correction

of current transformer distorted secondary currents due to saturation using artificial

neural networks,” IEEE Transactions on Power Delivery, Vol. 16, No. 2, pp. 189–

194, Apr. 2001.

[48] D. J. Zhang, Q. H. Wu, Z. Q. Bo, S. Potts, and G. C. Weller, “A novel approach to

transient directional protection relay at EHV transmission lines based on wavelet

analysis,” in Proc. 35th Universities’ Power Eng. Conf., Belfast, U.K., 2000.

[49] D. M. Peck, B. Nygaard and K. Wadelius, “A new numerical busbar protection

system with bay-oriented structure,” in 5th Int. Conf. on Developments in Power

System Protection, IEE Publication No. 368, pp. 228-231, 1993.

[50] D. Tholomier, R. Allain, H. Grassct and A. Perks, “The Challenges Met During

Protection Relay Certification”, In 8th IEE International Conference on

Developments in Power System Protection, Vol. 1, pp. 256-259, 5-8 Apr. 2004.

[51] D. Tholomier, S. Richards, and A. Apostolov, “Which one is better – line

differential or directional comparison?”. IET 9th Int. Conf. on Developments in

Power System Protection, pp. 86 – 91, 17 – 20 March 2008.

[52] Didier Wiot, “A New Adaptive Transient Monitoring Scheme for Detection of

Power System Events”, IEEE Trans. Power Del., Vol. 19, No. 1, pp. 42-48, Jan.

2004.

159

[53] E. M. dos S antos, G. Cardoso, Jr., P. E. Farias, and A. P. de Morais, “CT

Saturation Detection Based on the Distance Between Consecutive Points in the

Plans Formed by the Secondary Current Samples and Their Difference-Functions”,

IEEE Transactions on Power Delivery, Vol. 28, No. 1, pp. 29-37, Jan. 2013.

[54] F. Andow, N. Suga, Y. Murakami and K. Inamura, “Microprocessor based busbar

protection relay,” in 5th Int. Conf. on Developments in Power System Protection,

IEE Publication No. 368, pp. 103-106, 1993.

[55] F. Engler, O. E. Lanz, M. Haggli, and G. Bacchini, “Transient signals and their

processing to ultra high speed directional relay for EHV/UHV transmission line

protection,” IEEE Trans. Power App. Syst., Vol. 104, No. 6, pp. 1463–1473, Jun.

1985.

[56] F. Jiang, Z. Q. Bo, M. A. Redfern, G. Weller, Z. Chen and Dong Xinzhou,

“Application of Wavelet Transform in Transient Protection – Case Study: Busbar

Protection’, 7th IEE International Conference on Developments in Power System

Protection, Vol. 1, pp. 197-200, April 9-12, 2001.

[57] G. Benmouyal and J. Mahseredjian, “A combined directional and faulted phase

selector element based on incremental quantities,” IEEE Trans. Power Del., Vol.

16, No. 4, pp. 478–484, Oct. 2001.

[58] G. Benmouyal and S. Chano, “Characterization of phase and amplitude

comparators in UHS directional relays,” IEEE Trans. Power Del., Vol. 12, No. 2,

pp. 646–653, Apr. 1997.

[59] G. Benmouyal, D. Hou and D. Tziouvaras, “Zero-Setting Power-Swing Blocking

Protection”, Schweitzer Engineering Laboratories, Inc. Longueuil, Québec,

Canada, pp. 1-29, 2005.

[60] G. D. Rockefeller, “Fault protection with a digital computer,” IEEE Transactions

on Power Apparatus and Systems, PAS-88, No. 4, pp. 438-464, April 1969.

[61] G. Wang, H. Li and X. Li, “A New Numerical Distributed Busbar Protection”, In

Proceedings of 8th IEE International Conference on Developments in Power

System Protection, Vol. 1, pp. 387-390, 5-8 April 2004.

[62] GEC Measurment, Protective Relays Application Guide, London:, p. 225, June

1987.

160

[63] Guibin Zou and Houlei Gao, “A Traveling-Wave-Based Amplitude Integral

Busbar Protection Technique” IEEE Transactions on Power Delivery, Vol. 27, No.

2, pp. 602–609, Apr. 2012.

[64] H. Dashti, M. Sanaye-Pasand, and M. Davarpanah, “Fast and reliable CT

saturation detection using a combined method,” IEEE Transactions on Power

Delivery, Vol. 24, No. 3, pp. 1037–1044, Jul. 2009.

[65] H. Gao, Z. Guibin and M. Xiang, “A fast busbar protection technique based on

travelling wave,” IEEE Power and Energy Society General Meeting, pp. 1 – 6,

2012.

[66] H. Grasset and C. Best, “Busbar Protection Design for Economy of Panel Space,

Minimised Power Consumption, and Advanced Performance”, In Proceedings of

9th IET International Conference on Developments in Power System Protection,

pp. 546-550, March 17-20, 2008.

[67] H. Haug and M. Forster, “Electronic bus zone protection,” in CIGRE, Paris,

France, Session 31, Jun. 10–20, 1968.

[68] H. K. Zadeh and Z. Li, “A novel power swing blocking scheme using adaptive

neuro-fuzzy inference system,” Electric Power System Research, Vol. 78, pp.

1138–1146, 2008.

[69] H. K. Zadeh, “Fuzzy neuro approach to busbar protection”, IEEE Power

Engineering Society General Meeting, Vol. 2, pp. 1089-1093, 12-16 June 2005.

[70] H. K. Zadeh and M. Sanaye-Pasand, “Correction of saturated current transformers

secondary current using ANNs,” IEEE Transactions on Power Delivery, Vol. 21,

No. 1, pp. 73–79, Jan. 2006.

[71] H. S. Gill, “a microprocessor-based system for protecting busbars” a Ph.D. Thesis,

2002.

[72] H. S. Gill, T. S. Sidhu and M. S. Sachdev, “Microprocessor based busbar

protection scheme”, IEE Proceedings Generation, Transmission, Distribution, Vol.

147, No. 4, pp. 252-260, July 2000.

161

[73] H. Shu, D. Yuetao and T. Xincui, “A Novel Bus Protection Based on Transient

Energy of Voltage Traveling Wave and Current Traveling Wave”, 2nd

International

Workshop on Database Technology and Applications (DBTA), pp. 1–4, 2010.

[74] H. W. Dommel and J. M. Michels, “High speed relaying using travelling wave

transient analysis,” presented at the IEEE Power Engineering Soc. Winter Meeting,

New York, Jan/Feb. 1978.

[75] H. W. Funk and G. Ziegler, “Numerical Busbar Protection, Design and Service

Experience”, 6th IEE Conf. on Developments in Power System Protection, No.

434, pp. 131-134, 25-27 March 1997.

[76] H. Watanabe, I. Shuto, K. Igarashi, P. Beaumont and K. Okuno, “An enhanced

decentralized numerical busbar protection relay utilizing instantaneous current

values from high speed sampling”, In Proceedings of 7th IEE International

Conference on Developments in Power System Protection, pp. 133-136, 9-12 April

2001.

[77] He Jiali, Luo Shanshan, Wang Gang and M. Kezunovic, “Implementation of a

Distributed Digital Bus Protection System”, IEEE Transactions on Power Delivery,

Vol. 12, No. 4, pp. 1445-1451, October 1997.

[78] High Impedance Differential Relaying, GER-3184, GE Power Management,

Ontario, Canada, pp. 1-19, Available online: www.geindustrial.com/pm.

[79] H. T. Lin, “A lib SVM tutorial”, Added: May 21, 2004, Online available:

http://ntu.csie.org/~piaip/svm/svm_tutorial.html

[80] I. Xyngi and M. Popov, “Transient directional busbar protection scheme for

distribution networks”, Int. Conference on Developments in Power

System Protection, pp. 1 – 4, 2010.

[81] IEEE Guide for Protective Relay Applications to Power System Buses, IEEE

Standard C37.97 (Reaffirmed 12/90), 1979.

[82] IEEE Guide for Protective Relay Applications to Power System Buses, IEEE Std.

C37.234, 2009.

162

[83] IEEE Power System Relaying committee, “Feasibility of Adaptive Protection And

Control,” IEEE Transactions on Power Delivery, Vol. 8, No. 3, pp. 975-983, July

1993.

[84] Introduction to PSCAD/EMTDC, Manitoba HVDC Research Centre, Inc.

Winnipeg, MB, Canada, 2003.

[85] J. B. Royle and A. Hill, “Low impedance based differential busbar protection for

application to busbars of widely differing configurations”, in 4th IEE Conf. on

Developments in Power System Protection, No. 302, pp. 40-44, 1989.

[86] J. D. Duan and B. H. Zhang, “Research of traveling-wave differential bus

protection based on wavelet transform,” 39th International Universities Power

Engineering Conference, Vol. 2, pp. 694 – 697, 2004.

[87] J. D. Duan, B. H. Zhang, S. X. Zhang, “A novel distributed

bus protection based on traveling-wave power directions and wavelet

transformation”, 8th IEE International Conference on Developments in Power

System Protection, Vol.1, pp. 395 – 398, 2004.

[88] J. G. Andrichak and J. Cardenas, “Bus differential protection,” in Proc. 22nd

Western Protective Relay Conf., Spokane, WA, Oct. 24, 1995.

[89] J. G. Rao and A. K. Pradhan, “Differential Power-Based Symmetrical Fault

Detection During Power Swing”, IEEE Transactions on Power Delivery, Vol. 27,

No. 3, pp. 1557-1564, July 2012.

[90] J. He, Y. Zhan, and N. Yan, “New type power line carrier relaying system with

directional comparison for EHV transmission lines,” IEEE Trans. Power App.

Syst., vol. PAS-97, no. 3, pp. 429–436, Mar. 1984.

[91] J. L Blackburn, Protective Relaying, New York, Marcel Dekker Inc., p. 413, 1998.

[92] J. L. Blackburn, “Protective Relaying: Principles and Applications”, New York,

Marcel Dekker, Inc., 1987.

[93] J. M. Wheatley, “A microprocessor based current differential protection”, In

Proceedings of 4th IEE Conf. on Developments in Power System Protection, No.

302, pp. 116-120, 1989.

163

[94] J. Pan, K. Vu, and Y. Hu, “An efficient compensation algorithm for current

transformer saturation effects,” IEEE Transactions on Power Delivery, Vol. 9 No.

4, pp. 1623–1628, Oct. 2004.

[95] J. W. Evans, R. Parmella, K. M. Sheahan and J. A. Downes, “Conventional and

digital busbar protection: a comparative reliability study”, In Proceedings of 6th

IEE International Conference on Developments in Power System Protection, pp.

126-130, 25-27 March 1997.

[96] J. Zaborszky and M. Ilic-Spong, “Computer control of the large power system

during faults for inherently adaptive selective protection,” In Proceedings of IEEE

Power Engineering Society Summer Meeting Mexico City, July 1986.

[97] J. Zhao, Y. Chen, and P. Crossley, “Design and evaluation of a directional relay for

use within a distribution network restoration scheme,” in Proc. Power Eng. Soc.

Winter Meeting, Vol. 4, pp. 2374–2378, 2000.

[98] K. Brewis, K. Hearfield and K. Chapman, “Theory and Practical Performance of

Interlocked Overcurrent Busbar Zone Protection in Distribution Substations”, The

7th IEE Int. Conf. on Developments in Power System Protection, No. 479, pp. 475-

478, 9-12 April 2001.

[99] K. Dave, “Evaluation of differential protection relay performance during

transformer inrush current & CT saturation period,” 4th Int. conference on Power

System Protection and Automation, New Delhi, India, 21-22 Nov-2007.

[100] K. Feser, U. Braun, F. Engler and A. Maier, “Application of neural networks in

numerical busbar protection systems (NBPS)”, In Proceedings of the 1st

International Forum on Applications of Neural Networks to Power Systems, pp.

117-121, 23-26 July 1991.

[101] K. Narendra, D. Fedirchuk, N. Zhang, R. Midence, N. Perera, and V. Sood, “Phase

Angle Comparison and Differential Rate of Change Methods used for Differential

Protection of Busbars and Transformers” IEEE electrical power and energy

conference, pp. 134-139, 2011.

[102] K. S. Prakash, O. P. Malik, and G. S. Hope, “Amplitude comparator based

algorithm for directional comparison protection of transmission lines,” IEEE

Trans. Power Del., Vol.4, No.4, pp.2032–2041, Oct.1989.

164

[103] K. Seethalekshmi, S. N. Singh and S. C. Srivastava, “A Classification Approach

Using Support Vector Machines to Prevent Distance Relay Maloperation Under

Power Swing and Voltage Instability”, IEEE Trans. Power Del., Vol. 27, No. 3, pp.

1124–1133, Jul. 2012.

[104] L. F. Kennedy and C. D. Hayward, “Harmonic-current-restrained relays for

differential protection,” AIEE Transactions, Vol. 57, pp. 262-271, 1938.

[105] L. J. Powell, “Current transformer burden and saturation,” IEEE Trans. Ind. Appl.,

vol. IA-15, No. 3, pp. 294–302, May/Jun. 1979.

[106] L. Wang and A. Girgis, “A new method for power system transient instability

detection,” IEEE Trans. Power Del., Vol. 12, No. 3, pp. 1082–1089, Jul. 1997.

[107] L. Wei, Y. Yang and R. M. Nishikawa, “A study on several machine learning

methods for classification of malignant and benign clustered microcalcifications,”

IEEE Transactions on Medical Imaging, Vol. 24, No. 3, pp. 371-380, March 2005.

[108] Liu Pei, Chen Deshu and Cheng Lijun, “An adaptive busbar protection using single

chip microcomputers”, Int. Conf. on Advances in Power System Control,

Operation and Management (APSCOM), Vol. 1, pp. 141–145, 1991.

[109] M. A. Aizerman, E. M. Braverman, and L. I. Rozono´er. “Theoretical foundations

of the potential function method in pattern recognition learning”, Automation and

Remote Control, Vol. 25, pp. 821–837, 1964.

[110] M. A. Date, B. A. Oza, N. C. Nair, “Power System Protection,” Bharti Prakason,

India, 2002.

[111] M. Chamia and S. Liberman, “Ultra high speed relay for EHV/UHV transmission

lines-development, design and application,” IEEE Trans. Power App. Syst., Vol.

PAS-97, No. 6, pp. 2104–2116, Nov./Dec. 1978.

[112] M. E. Mohammed, “High speed differential busbar protection using wavelet packet

transform”, Proceeding IET Generation, Transmission & Distribution, Vol. 152,

No. 6, pp. 927-933, November 2005.

[113] M. Gaouda and M. A. Salama, “DSP Wavelet-Based Tool for Monitoring

Transformer Inrush Currents and Internal Faults”, IEEE Transactions on Power

Delivery, Vol. 25, No. 3, pp. 1258 – 1267, Jul 2010.

165

[114] M. Goyal, “Computer-Based Numerical & Statistical Techniques”, Infinity Science

Press LLC, Hingham, Massachusetts, New Delhi, India, pp. 262-266, 2007.

[115] M. M. Eissa and O. P. Malik, “A new digital directional transverse

differentialcurrent protection technique,”IEEE Trans. Power Del., Vol. 11, No. 3,

pp. 1285–1291, Jul. 1996.

[116] M. M. Eissa, “A new digital busbar protection technique based on frequency

information during CT saturation”, Electrical Power and Energy Systems, Vol. 45,

No. 1, pp. 42–49, 2013.

[117] M. M. Eissa, “A novel digital directional technique for bus-bars protection”, IEEE

Transactions on Power Delivery, Vol. 19, No. 4, pp. 1636-1641, October 2004.

[118] M. M. Eissa, “A novel wavelet approach to busbar protection during CT saturation

and ratio-mismatch”, Elect. Power Syst. Research, Vol. 72, pp. 41-48, 2004.

[119] M. M. Mansour and G. W. Swift, “A multi microprocessor based travelling wave

relay-theory and realization,” IEEE Trans. Power Del., vol. PWRD-1, No. 1, pp.

272–279, Jan. 1986.

[120] M. Nagpal, “Expert talk on Comprehensive Digital Protection of Generators,

Transformers, and Busbars”, In Proceedings of TENCON International Conference

on Innovative Technologies for Societal Transformation, Hyderabad, India,

November 18-21, 2008.

[121] M. P. Pozzuol, “Meeting the challenges of the new Millennium: The Universal

Relay”, Texas A & M University Conference for Protective Relay Engineers,

College Station, Texas, April 5-8, 1999.

[122] M. R. Aghaebrahimi and H. K. Zadeh, “Fuzzy Neuro Approach to Busbar

Protection: Design and Implementation”, International Journal of Information

Technology, Vol. 2, No. 1, pp. 66-70, 2005.

[123] M. R. D. Zadeh, T. S. Sidhu, and A. Klimek, “Implementation and Testing of

Directional Comparison Bus Protection Based on IEC61850 Process Bus”, IEEE

Transaction on Power Delivery, Vol. 26, No. 3, pp. 1530- 1537, July 2011.

166

[124] M. S. Sachdev (Coordinator), “Advancements in microprocessor based protection

and communication- Tutorial course text,” IEEE Publication No. 97TP120-0, New

York, 1997.

[125] M. S. Sachdev (Coordinator), “Microprocessor relays and protection systems,”

IEEE Tutorial Course Text, Pub. No. 88-EH0269-1-PWR, Piscataway, NJ, pp. 24-

28, 1988.

[126] M. S. Sachdev, “Computer Relaying,” IEEE Tutorial Course Text, Pub. No.

79EH0148-7-PWR, 1979.

[127] M. S. Sachdev, T. S. Sidhu and H. S. Gill, “A Busbar Protection Technique and Its

Performance during CT Saturation and CT Ratio-Mismatch”, IEEE Transactions

on Power Delivery, Vol. 15, No. 3, pp. 895-901, July 2000.

[128] M. Sanaye-Pasand and O. P. Malik, “Implementation and laboratory test results of

an Elman network-based transmission line directional relay,” IEEE Trans. Power

Del., Vol. 14, No. 3, pp. 782–788, Jul. 1999.

[129] M. Stockton, “Protection of distribution systems using electronic devices”, IEE

Colloquium on a Practical Approach to the protection of Industrial Power Systems

Networks up to 11 kV, Ref. No. 1999/062, pp. 1-4, 24th February 1999.

[130] M. T. Glinkowski and J. Esztergalyos, “Transient modeling of electromechanical

relays, Part 1: Armature type overcurrent relay,” IEEE Trans. Power Del., Vol. 11,

No. 2, pp. 763–770, Apr. 1996.

[131] M. T. Yee and J. Estergalyos, “Ultra high speed relay for EHV/UHV transmission

lines-installation, staged fault tests and operational experience,” IEEE Trans.

Power App. Syst., Vol. PAS-97, No. 5, pp. 1814–1825, Sep./Oct. 1978.

[132] M. Thompson, R. Folkers and A. Sinclair, “Secure application of transformer

differential relays for bus protection”, 58th Annual Conference for Protective

Relay Eingeers, pp. 158-168, April 5-7, 2005.

[133] M. Vitins, “A fundamental concept for high speed relaying,” IEEE Trans. Power

App. Syst., Vol. 100, No. 1, pp. 163–173, Jan. 1981.

[134] N. Aronszajn, “Theory of reproducing kernels”, Transaction on American

Mathatical Society, Vol. 68 No. 3, pp. 337–404, 1950.

167

[135] N. G. Chothani and B.R. Bhalja, “A new differential protection scheme for busbar

considering CT saturation effect”, IEEE 24th Canadian Conference on Electrical

and Computer Engineering, Niagara Falls, Canada, pp. 7-10, May 08-11, 2011.

[136] N. G. Chothani, B. R. Bhalja and Urmil Parikh, “New fault zone identification

scheme for busbar using support vector machine”, Proc. IET Generation

Trasmission Distribution, Vol. 5, No. 10, pp. 1073–1079, 2011.

[137] N. G. Chothani, B.R. Bhalja and R.P.Maheshwari, “A new digital differential

relaying scheme for the protection of busbar”, 4th International Conference on

CERA-09, IIT Roorkee, February 19-21, 2010.

[138] N. E. Heckman, “The theory and application of penalized least squares methods or

reproducing kernel hilbert spaces made easy”, University of British Columbia

Department of Statistics Technical Report: 216, Aug. 22, 1997.

[139] N. Villamagna and P. A. Croossley, “A CT saturation algorithm using symmetrical

components for current differential protection,” IEEE Transactions on Power

Delivery, Vol. 21, No. 1, pp. 38–45, Jan. 2006.

[140] N. Zhang and M. Kezunovic, “A study of synchronized sampling based fault

location algorithm performance under power swing and out-of step conditions,” in

Proc. Power Tech, St. Petersburg, Russia, pp. 1–7, Jun. 2005.

[141] N. G. Chothani, B. R Bhalja, U. B. Parikh, “Development of a new bus zone

identification algorithm using support vector machine”, Proc. IET Generation

Transmission and Distribution, Vol. 6, Iss. 7, pp. 710 – 718, 2012.

[142] N. Cristianini and J. S. Taylor, “An introduction to support vector machines and

other kernel-based learning methods”, 1st edition, Cambridge University Press,

2000.

[143] N. Perera and A. D. Rajapakse, “Development and Hardware Implementation of a

Fault Transients Recognition System”, IEEE Transactions on Power Delivery, Vol.

27, No. 1, pp. 40-52, Jan 2012.

[144] O. E. Lanz, F. Engler, M. Hanggli, and G. Bacchini, “A modern approach to ultra

high speed directional relaying,” in Proc. 3rd Int. Conf. Developments in Power

System Protection, London, U.K., pp. 101–105, 1985.

168

[145] P. G. McLaren, G. W. Swift, Z. Zhang, E. Dirks, R. P. Jayasinghe, and I.

Fernando, “A new directional element for numerical distance relays,” IEEE Trans.

Power Del., Vol. 10, No. 2, pp. 666–675, Apr. 1995.

[146] P. Jena and A. K. Pradhan, “Busbar Protection- A Solution to CT Saturation”

Fifteenth National Power Systems Conference (NPSC), IIT Bombay, pp. 311-316,

December 2008.

[147] P. K. Dash, S. R. Samantaray and G. Panda, “Fault Classification and Section

Identification of an Advanced Series-Compensated Transmission Line using

Support Vector Machine”, IEEE Trans. Power Delivery, Vol. 22, No. 1, pp. 67-73,

Jan. 2007.

[148] P. M. Anderson, “Power System Protection”, IEEE Press, New York, 1999. [66]

[149] P. M. Anderson, “Analysis of Faulted Power Systems”, IEEE Press power system

engineering series, New York, 1995.

[150] P740 Numerical Busbar Protection, Technical Data Sheet, Publication No.

P740/EN TD/G22, AREVA T&D, pp. 1-22.

[151] PSCAD/EMTDC Manual, “Getting Started”, HVDC Research Centre Inc.,

Manitoba, January 2001.

[152] “PSCAD/EMTDC Power Systems Simulation Manual”, Winnipeg, Manitoba,

Canada, 1997.

[153] Q. H. Wu, J. F. Zhang, and D. J. Zhang, “Ultra-high speed directional protection of

transmission lines using mathematical morphology,” IEEE Trans. Power Del., Vol.

18, No. 4, pp. 1127–1133, Oct. 2003.

[154] Q. Shang, Y. Qi and Z. Xie, “A New Digital Bus Protection System using OCT

and DSP”, In Proceedings of 6th International Conference on Signal Processing,

Vol. 2, pp. 1731-173426-30, August 2002.

[155] R. E. Cordray, “Percentage differential transformer protection,” Electrical

Engineering, Vol. 50, pp. 361–363, May 1931.

[156] R. Hughes and E. Legrand, “Numerical Busbar Protection Benefits of Numerical

Technology in Electrical Engineering”, In Proceedings of 7th IEE International

169

Conference on Developments in Power System Protection, pp. 133-136, 9-12 April

2001.

[157] R. M. Rafaat, “Considerations in Applying Power Bus Protection Schemes to

Industrial and IPP Systems”, IEEE Transactions on Industry Applications, Vol. 40,

No. 6, pp. 1705-1711, Nov/Dec. 2004.

[158] Relay Application Guide, ALSTOM T&D Protection & Control Ltd, Publication

R5582M, pp. 1-19.

[159] Report of Working Group-116 of the Relaying Practices Subcommittee,

“Understanding Microprocessor Based Technology Applied to Relaying,” Power

System Relaying Committee, pp. 1-77, Jan. 2006.

[160] Rosa M de Castro Fernandez and Horacio Nelson Diaz rojas, “An overview of

wavelet transforms application in power systems,” In Proceedings of 14th Power

System Computation Conference, Spain, Session 1, Paper No. 6, 24-28 June 2002.

[161] S. A. Gafoor, P. V. Ramana Rao, “A transient current based busbar protection

scheme using Wavelet Transforms”, Electrical Power and Energy Systems, Vol.

33, No. 1, pp.1049–1053, 2011.

[162] S. Bin, D. Xinzhou, S. Yuanzhang, Z. Q. Bo, and H. Jiali, “New principle of high-

speed directional relay,” in Proc. Power Eng. Soc. Summer meeting, Vol. 1, pp.

387–392, 2002.

[163] S. Gautam and S. M. Brahma, “Out-of-step blocking function in distance relay

using mathematical morphology”, IET Gener. Transm. Distrib., Vol. 6, No. 4, pp.

313–319, 2012.

[164] S. H. Horowitz and A. G. Phadke, “Power System Relaying” Taunton, U.K.,

Research Studies, 1992.

[165] S. K. Wong and A. Kalam, “Distributed intelligent power system protection using

case based and object paradigms”, In Proceedings of ISAP 1996, International

Conference on Intelligent Systems Applications to Power Systems, pp. 74-78, 28th

Jan.- 2nd Feb. 1996.

170

[166] S. Lotfifard, J. Faiz and M. Kezunovic, “Detection of Symmetrical Faults by

Distance Relays during Power Swings”, IEEE Trans. Power Del., Vol. 25, No. 1,

pp. 81-87, Jan. 2010.

[167] S. M. Brahma, “Distance relay with out-of-step blocking function using wavelet

transform,” IEEE Trans. Power Del., Vol. 22, No. 3, pp. 1360–1366, Jul. 2007.

[168] S. M. Hashemi, M. T. Hagh, and H. Seyedi, “Transmission Line Protection:

Directional Comparison Scheme using the Average of Superimposed

Components”, IEEE Transactions on Power Delivery, Vol. 28, No. 2, pp. 955 –

964, 2013.

[169] S. P. Valsan and K. S. Swarup, “Computationally Efficient Wavelet-Transform

Based Digital Directional Protection for Busbars”, IEEE Transactions on Power

Delivery, Vol. 22, No. 3, pp. 1342-1350, Jul. 2007.

[170] S. R. Mohanty, A. K. Pradhan, and A. Routray, “A Cumulative Sum-Based Fault

Detector for Power System Relaying Application,” IEEE Trans. Power Del., Vol.

23, No. 1, pp. 79-86, Jan. 2008.

[171] S. Ward, T. Dahlin and W. Higinbotham, “Improving Reliability for Power System

Protection,” In proceedings of 58th Annual Protective Relay Conference, Atlanta,

GA, pp.1-25, 2004.

[172] S. H. Horiwitz and A. G. Phadke, “Power System Relaying”, New York: John

Wiley & Sons, p. 125, 1996.

[173] S. R. Samantaray, L. N. Tripathy, P. K. Dash, and G. Panda, “S-transform based

directional bus-bar protection” TENCON 2008, IEEE Region 10 Conference,

Hyderabad, India, pp. 1 – 6, 19-21 Nov. 2008.

[174] Sukhwinder Singh, Vinod Kumar, H. K. Verma and Dilbag Singh, “SVM based

system for classification of microcalcifications in digital mammograms,” In

Proceedings of the 28th IEEE EMBS Annual International Conference, New York

City, USA, pp. 4747-4750, August 30-September 03, 2006.

[175] Sun-Li Yu and Jyh-Cherng Gu, “Removal of Decaying DC in Current and Voltage

Signals Using a Modified Fourier Filter Algorithm,” IEEE Transactions on Power

Delivery, Vol. 16, No. 3, pp. 372–379, Jul. 2001.

171

[176] T. Dalstein, D. J. Sobajic, B. Kulicke, and Y. H. Pao, “Neural network approach to

fault direction identification in electric power systems,” in Proc. North American

Power Symp., Cleveland, OH, pp. 290–299, Oct. 11–12, 1993.

[177] T. E. DyLiacco, “The adaptive reliability control system,” IEEE Transactions on

Power Apparatus and Systems, PAS-86, pp. 517-531, May 1967.

[178] T. Forford and J. R. Linders, “A half cycle bus differential relay and its

application”, IEEE Transactions on Power Apparatus & Systems, pp. 1110-1117,

Jul/Aug. 1974.

[179] T. S. M. Rao, “Digital/Numerical Relays,” Tata McGraw-Hill Publishing

Company Ltd; New Delhi, India, 2005.

[180] T. S. Sidhu, H. Singh, and M. S. Sachdev, “Design, implementation and testing of

an artificial neural network based fault direction discriminator for protecting

transmission lines,” IEEE Trans. Power Del., Vol. 10, No. 2, pp. 697–706, Apr.

1995.

[181] T. S. Sidhu, L. Mital and M. S. Sachdev, “A Comprehensive Analysis of an

Artificial Neural-Network-Based Fault Direction Discriminator,” IEEE

Transactions on Power Delivery, Vol. 19, No. 3, pp. 1042-1048, Jul. 2004.

[182] T. Tran-Quoc and L. Pierrat, “Influence of random variables on protective current

transformers transient performance,” in Proc. Int. Conf. Digital Power System

Simulators, College Station, TX, Apr. 5–7, 1995.

[183] The Electricity Council, “Power System Protection”, Vol. 1, Principals and

Components, Peter Peregrinus Ltd; London, 1981.

[184] “TMS320F28335 Digital Signal Processors”, Data Manual, Texas Instruments,

2012, available from: http://www.ti.com/product/tms320f28335.

[185] U. B. Parikh, B. Das and R. P. Maheshwari, “Combined Wavelet-SVM Technique

for Fault Zone Detection in a Series Compensated Transmission Line”, IEEE

Transactions on Power Delivery, Vol. 23, No. 4, pp.1789-1794, 2008.

[186] U. B. Parikh, B. Das and R. P. Maheshwari, “Fault classification technique for

series compensated transmission line using support vector machine”, Electrical

Power & Energy System, Vol. 32, No. 6, pp. 629-636, Jul. 2010.

172

[187] U. Braun, U. Stuttgart, K. Feser and D. Peck, “Restoring Current Signals in Real

Time using Feed Forward Neural Nets”, In Proceedings of ANNPS 1993, 2nd

International Conference on Neural Networks to Power Systems, pp. 441-446,

1993.

[188] U. D. Annakkage, P. G. McLaren, E. Dirks, R. P. Jayasinghe, and A. D. Parker, “A

current transformer model based on the Jiles – Atherton theory of ferromagnetic

hysteresis”, IEEE Trans. on Power Delivery, Vol. 15, No. 1, pp. 57 – 61, 2000.

[189] V. S. Vankayala and N. D. Rao, “Artificial neural networks and their applications

to power systems- a bibliographical survey,” Internaional Journal of Electric Power

System Research, Vol. 28, pp. 67-79, 1993.

[190] V. Vapnik, ‘The Nature of Statistical Learning Theory”, New York, Springer,

1995.

[191] V. Vapnik, “Statistical Learning Theory,” Wiley, New York, 1998.

[192] V. Vittal, “Transient Stability and Control of Large Scale Power Systems”, Power

Sys. Eng. Research Center, Sep. 2003.

[193] W. Chan, O. P. Malik, X. Yin, D. Chen and Z. Zhang, “Study of wavelet based

ultra high speed directional transmission line protection,” IEEE Trans. Power Del.,

Vol. 18, No. 4, pp. 1134–1139, Oct. 2003.

[194] W. Rebizant and D. Bejmert, “Current-Transformer Saturation Detection with

Genetically Optimized Neural Networks”, IEEE Transactions on Power Delivery,

Vol. 22, No. 2, pp. 820- 827, Apr. 2007.

[195] Walter Elmore, “Protective Relaying: Theory and Applications”, New York,

Marcel Dekker Inc; 1994.

[196] Western System Coordinating Council, “Relaying current transformer application

guide”, Relay work group, Jun. 1989.

[197] X. Lin, L. Zou, Q. Tian, H. Weng, and P. Liu, “A series multi-resolution

morphological gradient-based criterion to identify CT saturation,” IEEE

Transactions on Power Delivery, Vol. 21, No. 3, pp. 1169–1175, Jul. 2006.

173

[198] X. Lin, Y. Gao, and P. Liu, “A novel scheme to identify symmetrical faults

occurring during power swings,” IEEE Trans. Power Del., Vol. 23, No. 1, pp. 73–

78, Jan. 2008.

[199] X. Lin, W. Lu, Q. Tian, H. Weng and P. Liu, “A Novel Duplicated Main

Protection Scheme Suitable for Both Transmission Lines and Busbars”, IEEE

Power Engineering Society General Meeting, pp. 1-7, 18-22 June 2006.

[200] Y. C. Kang, J. K. Park, S. H. Kang, A. T. Johns, and R. K. Aggarwal, “An

algorithm for compensating secondary current of current transformers,” IEEE

Transactions on Power Delivery, Vol. 12, No. 1, pp. 116–124, Jan. 1997.

[201] Y. C. Kang, J. S. Yun, B. E. Lee, S. H. Kang, S. I. Jang and Y. G. Kim, “Busbar

differential protection in conjunction with a current transformer compensating

algorithm”, Proceeding IET Generation, Transmission & Distribution, Vol. 2, No.

1, pp. 100-109, Jan. 2008.

[202] Y. C. Kang, S. H. Kang and P. A. Crosssley, “Design, evaluation and

implementation of a busbar differential protection relay immune to the effects of

current transformer saturation”, IET Proceedings Generation, Transmission and

Distrubution, Vol. 151, No. 3, pp. 305-312, 2004.

[203] Y. C. Kang, S. H. Ok, and S. H. Kang, “A CT saturation detection algorithm,”

IEEE Transactions on Power Delivery, Vol. 19, No. 1, pp. 78–85. Jan. 2004.

[204] Y. C. Kang, U. J. Lim and S. H. Kang, “Compensating algorithm suitable for use

with measurement type current transformers for protection”, IET Proceedings

Generation, Transmission and Distrubution, Vol. 152, No. 6, pp. 880-890, 2005.

[205] Y. C. Kang, U. J. Lim, S. H. Kang and P. A. Corssley, “A Busbar Differential

Protection Relay Suitable for use with Measurement Type Current Transformers”,

IEEE Transactions on Power Delivery, Vol. 20, No. 2, pp. 1291-1298, Apr. 2005.

[206] Y. G. Paithankar and S. R. Bhide, “Fundamentals of Power System Protection”, p.

101, 2003.

[207] Y. Wu, “The analysis of current transformer transient response and its effect on

current relay performance,” IEEE Trans. Ind. Appl., Vol. IA-21, No. 4, pp. 247–

252, May/Jun. 1985.

174

[208] Y. Y. Hong and D. W. Wei, “Compensation of distorted secondary current caused

by saturation and remanence in a current transformer,” IEEE Transactions on

Power Delivery, Vol. 25, No. 1, pp. 47–54, Jan. 2010.

[209] Y. Y. Hong P. C. Chang-Chian, “Detection and correction of distorted current

transformer current using wavelet transform and artificial intelligence,” IET Gener.

Transm. Distrib., Vol. 2, No. 4, pp. 566 – 575, 2008.

[210] Z. Chen, Z. Q. Bo, Xiang-ning Lin and B. R. J. Caunce, “Integrated Line and

Busbar Protection Scheme Based on Wavelet Analysis of Fault Generated

Transient Current Signals”, In Proceedings of POWERCON, IEEE Int. Conference

on Power System Technology, Singapore, pp. 396-401, 21-24 Nov. 2004.

[211] Z. Q. Bo, A. T. Johns, R. K. Aggarwal, “A new directional relay based on the

measurement of fault generated current transients”, Sixth International Conference

on Developments in Power System Protection, No. 434, pp. 227 – 230, 1997.

[212] Z. Pavel and B. Leonid, “Differential busbar protection current circuits transients

features during non-simultaneous short faults”, In Proceedings of 7th Korea-Russia

International Symposium (KORUS), Vol. 2, pp. 76-81, 2003.