13966-Txxx_Rev_D_21NOV20162

TABLEOFCONTENTS

1.WarningsandCautions _________________________________________________________________________32.PumpModelMatrix____________________________________________________________________________43.PumpDimensionsandSpecifications_____________________________________________________________5-64.PerformanceCurvesandSpecifications___________________________________________________________7-8

T025,T038,T050 ______________________________________________________________________________7T100,T150,T200 ______________________________________________________________________________8

5.Installation,TroubleshootingandMaintenance __________________________________________________ 9-12Installation ________________________________________________________________________________ 9-10Troubleshooting______________________________________________________________________________11Operation ___________________________________________________________________________________12Maintenance_________________________________________________________________________________13ShutDown___________________________________________________________________________________14

6.TorqueSpecifications__________________________________________________________________________157.ExplodedViewandPartsList_________________________________________________________________ 15-26

T025_____________________________________________________________________________________ 16-17T038_____________________________________________________________________________________ 18-19T050_____________________________________________________________________________________ 20-21T100_____________________________________________________________________________________ 22-23T150_____________________________________________________________________________________ 24-25T200_____________________________________________________________________________________ 26-27

8.WarrantyandRegistration______________________________________________________________________29

3

13966-Txxx_Rev_D_21NOV20164

ModelDesignationMatrix

5

PumpSpecifications

13966-Txxx_Rev_D_21NOV20166

PumpDimensions

7

Performance Curves

Max. Flow: 2.6 gpm (10 lpm)Max. Air Pressure: 116 PSI (8 bar)Max. Solids: 1/16" (2 mm)Max. Suction Lift Dry: 1.6 ft-H2O (0.5 m-H2O)Max. Suction Lift Wet: 29.5 ft-H2O (9 m-H2O)Weight: 3.3 lbs (1.5 kg)Air Inlet: 1/8"Liquid Inlet: 1/4"Liquid Outlet: 1/4"Height 5.12" (130 mm)Width: 4.5" (114 mm)Depth: 2.76" (70 mm)

T025 Performance Specifications

Max. Flow: 6.6 gpm (25 lpm)Max. Air Pressure: 116 PSI (8 bar)Max. Solids: 1/8" (3 mm)Max. Suction Lift Dry: 6.6 ft-H2O (2 m-H2O)Max. Suction Lift Wet: 29.5 ft-H2O (9 m-H2O)Weight: 5.3 lbs (2.4 kg)Air Inlet: 1/8"Liquid Inlet: 3/8"Liquid Outlet: 3/8"Height 6.86" (174 mm)Width: 5.04" (128 mm)Depth: 4.13" (105 mm)

T038 Performance Specifications

Max. Flow: 14.5 gpm (55 lpm)Max. Air Pressure: 116 PSI (8 bar)Max. Solids: 5/32" (4 mm)Max. Suction Lift Dry: 9.8 ft-H2O (3 m-H2O)Max. Suction Lift Wet: 29.5 ft-H2O (9 m-H2O)Weight: 15 lbs (6.8 kg)Air Inlet: 1/4"Liquid Inlet: 1/2"Liquid Outlet: 1/2"Height 9.96" (253 mm)Width: 6.97" (177 mm)Depth: 6.02" (153 mm)

T050 Performance Specifications

13966-Txxx_Rev_D_21NOV20168

Max. Flow: 33 gpm (125 lpm)Max. Air Pressure: 116 PSI (8 bar)Max. Solids: 9/32" (7 mm)Max. Suction Lift Dry: 13.1 ft-H2O (4 m-H2O)Max. Suction Lift Wet: 29.5 ft-H2O (9 m-H2O)Weight: 36.4 lbs (16.5 kg)Air Inlet: 1/4"Liquid Inlet: 1"Liquid Outlet: 1"Height 13.38" (340 mm)Width: 19.13" (232 mm)Depth: 7.78" (198 mm)

T100 Performance Specifications

Max. Flow: 83 gpm (315 lpm)Max. Air Pressure: 116 PSI (8 bar)Max. Solids: 3/8" (10 mm)Max. Suction Lift Dry: 13.1 ft-H2O (4 m-H2O)Max. Suction Lift Wet: 29.5 ft-H2O (9 m-H2O)Weight: 98.1 lbs (44.5 kg)Air Inlet: 1/2"Liquid Inlet: 1 1/2"Liquid Outlet: 1 1/2"Height 17.95" (456 mm)Width: 12.28" (312 mm)Depth: 10.63" (270 mm)

T150 Performance Specifications

Max. Flow: 150 gpm (565 lpm)Max. Air Pressure: 116 PSI (8 bar)Max. Solids: 15/32" (12 mm)Max. Suction Lift Dry: 16.4 ft-H2O (5 m-H2O)Max. Suction Lift Wet: 29.5 ft-H2O (9 m-H2O)Weight: 192 lbs (87 kg)Air Inlet: 1/2"Liquid Inlet: 2"Liquid Outlet: 2"Height 22.44" (570 mm)Width: 15.16" (385 mm)Depth: 13.78" (350 mm)

T200 Performance Specifications

9

InstallationPipingWheneverpossibleensurethepumpisinstalledusingtheshortestpossiblepipelengthswiththeminimumamountofpipefittings.Ensureallpipingissupportedindependentofthepump.Suctionanddischargepipingshouldnotbesmallerthantheconnectionsizeofthepump.Whenpumpingliquidsofhighviscosity,largerpipingmaybeused,inordertoreducefrictionalpipeloss.Employflexiblehosesinordertoeliminatethevibrationcausedbythepump.Mountingfeetcanalsobeusedtoreducevibrationeffects.Allhosesshouldbereinforced,non-collapsibleandbecapableofhighvacuumservice.Ensurethatallpipingandhosesarechemicallycompatiblewiththeprocessandcleaningfluid.Forprocesseswherepulsationeffectsshouldbereduced,employapulsationdampeneronthedischargesideofthepump.Forself-primingapplications,ensureallconnectionsareairtightandtheapplicationiswithinthepumpsdry-liftcapability.Refertoproductspecificationsforfurtherdetails.Forfloodedsuctionapplications,installagatevalveonthesuctionpipinginordertofacilitateservice.Forunattendedfloodedsuctionoperation,itisrecommendedtopipetheexhaustairabovetheliquidsource.Intheeventofadiaphragmfailurethiswillreduceoreliminatethepossibilityofliquiddischargingthroughtheexhaustontotheground.

LocationEnsurethatthepumpisinstalledinanaccessiblelocation,inordertofacilitatefutureserviceandmaintenance.

AirEnsurethattheairsupplyissufficientforthevolumeofairrequiredbythepump.Refertoproductspecificationsforfurtherdetails.Forreliableoperation,installa5micronairfilter,air-valveandpressureregulator.Donotexceedthepumpsmaximumoperatingpressureof120psig.

RemoteOperationUtilizeathreewaysolenoidvalveforremoteoperation.Thisensuresthatairbetweenthesolenoidandthepumpisallowedto“bleedoff,”ensuringreliableoperation.Liquidtransfervolumeisestimatedbymultiplyingdisplacementperstroketimesthenumberofstrokesperminute

NoiseCorrectinstallationofthemufflerreducessoundlevels.Refertoproductspecificationsforfurtherdetails.

SubmergedOperationForsubmersibleoperation,pipetheairexhausttoatmosphere

13966-Txxx_Rev_D_21NOV201610

Installation

SELF

PRIMINGAPPLICATION

Suctionliftcapabilitymayvarydependingontheconstructionmaterialsandapplicationparameters.Therangeisfrom16.4feetdryto30feetinaprimedcondition(valuescalculatedforpumpingwaterat68degreesFahrenheit).

SUBMERGEDOPERATION

Allpumpsmayoperateinfullsubmersion.Constructionmaterialsmustbecompatiblewithsurroundingliquidandtheairexhaustmustbeplacedabovetheliquidlevel.

POSITIVESUCTIONHEAD

Commonasamethodofdrawingoffthebottomsofholdingtanksandclarifiers.Optimuminletpressureshouldbekeptat14.5PSI.

11

Troubleshooting

PROBLEM EFFECT/SOLUTIONPumpWillNotCycle

DischargelineclosedorpluggedDischargefilterblockedCheckvalvestuckAirfilterblockedAirsupplyvalveclosedAirsupplyhookeduptomufflersideofpumpCompressornotproducingairorturnedoffMufflericedorblindedDiaphragmrupturedPlantairsupplylinerupturedAirvalvewear/debrisPilotsleevewear/debrisDiaphragmrodbrokenDiaphragmplateloose

PumpedFluidComingOutofMufflerDiaphragmrupturedDiaphragmplatelooseInletliquidpressureexcessive(above10psig)

PumpCyclesbutnoFlowInletstrainercloggedSuctionvalveclosedSuctionlinepluggedNoliquidinthesuctiontankSuctionliftexcessiveDebrisstuckinvalvesExcessivewearofcheckvalvesAirleakonsuctionsidewithsuctionlift

PumpCycleswithClosedDischargeValveDebrisstuckincheckvalveExcessivewearofcheckvalves

PumpRunningSlowly/NotSteadyAircompressorundersizedLeakinairsupplyAir-line,filterregulatororneedlevalveundersizedMufflerpartiallyicedorblindedAirvalvegasketleakormisalignmentAirvalvewear/debrisPilotsleevewear/debrisLiquidfluidfilterblockedPumpmaybecavitating,reducespeedofoperationSuctionstrainerclogged

PumpWillNotPrimeAirleakinsuctionpipeAirleakinpumpmanifoldconnectionsSuctionstrainerandlinescloggedExcessiveliftconditionsCheckvalvewearDebrisincheckvalve

Ifanyoftheabovementionedcausesdonotapplytoyourproblem,contactyourAll-Floauthorizeddistributor.

13966-Txxx_Rev_D_21NOV201612

Operation

1) Starttheaircompressor.

2) Opentheairvalve.Usingaregulatortoadjustthesupplyairpressurewithinthepermissiblerange.

3) Opentheflowvalveonthedischargeside.

4) First,checkthatfluidisflowinginsidethepipingandisbeingpumpedtothedischargeside,andthenfullyopentheairvalve.

FlowAdjustment

Adjusttheflowvalveonthedischargeside,oradjustthesupplyairpressure.

! CAUTION

! CAUTION

! Before starting the pump, check that all piping is properly connected.

! Before starting the pump, check that all the bolts are securely tightened.

! Check that the regulator and the drain valve on the discharge side are closed and that the valve on the suction side is opened if applicable.

! The supply air pressure may initially rise during closing the flow valve. Make sure that the pressure is kept within the normal operating range.

! The permissible suction flow speed can vary depending upon the viscosity and specific gravity of the fluid, the suction stroke and other factors. However in case of a rapid growth of the pump speed (flow speed of fluid), cavitations will occur. This will reduce pump performance and may cause a malfunction. In order to prevent cavitations, adjust the supply air pressure and the flow.

! If fluid is not discharged after you start the pump, or if you hear an abnormal noise or notice any irregularity, shut down the pump immediately.

13

Maintenance

CleaningthePump

1) Removethehosefromthesuctionsideofthepump.

2) Closetheflowvalveonthedischargesideandopenthedrainvalve.Thenstartairpressureforawhiletodischargepossiblymuchfluidremaininginsidethepump.

3) Removethehosefromthedischargeside,andattachdifferenthosestothesuctionsideandthedischargesideforcleaning.

4) Bereadywithavesselwithcleaningsolution,thekindappropriateforthetypeoffluidpumped.Nextconnectthesuction-sideandthedischarge-sidehosesofthepump.

5) Startthepumpairpressureslowly,andletthecleaningsolutioncirculateforsufficientcleaning.

6) Flushwithcleanwater.

7) Removethehosefromthesuctionsideofthepump,runthepumpforawhiletopurgethepumpofremainingfluidasmuchaspossible.

! WARNING

! CAUTION

! Make sure that compressed air is not supplied to the pump BEFORE you start cleaning the pump.

! Make sure that the pump is not pressurized BEFORE you start cleaning the pump.

! Be extremely careful when removing piping - the fluid will run/flow out.

! After cleaning with clean water, turn the pump upside-down to let the water flow out.

13966-Txxx_Rev_D_21NOV201614

ShutdownClosetheairvalveofthepumpandshutoffthesupplyair.

Dailycheck

Beforestartingpumpoperation,conductthefollowingcheckprocedureseveryday.Incasethereappearsanyirregularity,doNOTstartrunningthepumpuntilthecauseoftheirregularityhasbeendeterminedandcorrectivemeasureshavebeentaken.

a)Makesurethatthereisnoleakageoffluidfromanyconnectionpartorthepump.

b) Makesurethattherearenocracksinthepumpcasingorpiping.

c) Checkthetightnessofeveryboltofthepump.

d) Makesurethattheconnectionpartsofthepipingandperipheralequipmentarenotloose.

e)Makesurethatanypartsofthepumpthataretobereplacedatregularintervalshavebeenchanged.

! CAUTION

! CAUTION

! The pump can be shut down with the flow valve closed while air is being supplied. However DO NOT leave the pump in this condition for many hours without supervision - there is a risk of a leak from the pump or piping, and fluid may continue flowing out of the position of leakage.

! When the pump is shut down while pumping slurry, particulate matter contained in the slurry will be deposited and get stuck inside the out chamber. Therefore after finishing work the pump must be cleared of the remaining fluid. Otherwise when starting the pump again, the diaphragm may get damaged and the center rod may bend.

! Keep a vessel below the relief valve for any drain off.

! Be careful! - Fluid under pressure will gush out the moment you open the valve.

! If the pump is unused for a prolonged period, purge and clean it.

15

PumpSizeT025 18in-lbs(2N-m)T038 44in-lbs(5N-m)T050 62in-lbs(7N-m)T100 97in-lbs(11N-m)T150 133in-lbs(15N-m)T200 168in-lbs(19N-m)

MaximumTorqueSpecificationsTorquevaluesforhousingbolts

13966-Txxx_Rev_D_21NOV201616

T025-EXPLODEDVIEW

17

T025-PARTSLISTITEM PARTNUMBER QTY DESCRIPTION MATERIAL

1HP-2080123

2 PumphousingPTFE

HP-2080124 ConductivePTFE

2HP-1081020

1 CenterhousingPE

HP-1081021 ConductivePE

3

HP-2083023

2

Suction/DischargeportsBSP PTFEHP-2083023 Suction/DischargeportsNPT PTFE

n/a Suction/Dischargeports-twin(splitconnection)NPT PTFEn/a Suction/Dischargeports-twin(splitconnection)BSP PTFE

HP-2083323 1 Suctionport-drum PTFE4 HP-1086906 4 Shockabsorber NR/St375 HP-1089935 1 Muffler PEporous6 HP-2085423 4 Valveseat PTFE7 HP-2085923 2 Pluglower PTFE8 HP-20805523 2 Plugupper PTFE9 HP-2083923 2 Valvestopper PTFE10 HP-2083823 2 Bolt PTFE11 HP-10825450 1 Valveseatkey AISI30412 HP-10815800 1 Upper/lowerplugkey(SK1,*-SK2) diverse13 HP-1085800 1 Airvalvekey(SK4) diverse

REPAIRKITSA TAK-025 KIT Airvalve PET/NBRW TWE-025-PTTT KIT PTFEWETKIT

2 Diaphragm TFM/PTFE

4 Valveballs PTFE

4 Sealinginlet/outlet FEP/FPM

2 Pluguppersealing FEP/FPM

1 Muffler PEporous

13966-Txxx_Rev_D_21NOV201618

T038-EXPLODEDVIEW

19

T038-PARTSLISTITEM PARTNUMBER QTY DESCRIPTION MATERIAL

1HP-2100123

2 PumphousingPTFE

HP-2100124 ConductivePTFE

2HP-1101020

1 CenterhousingPE

HP-1101021 ConductivePE

3

HP-2103023

2

Suction/DischargeportsBSP PTFEHP-2103023 Suction/DischargeportsNPT PTFE

HP-2103123NPT Suction/Dischargeports-twin(splitconnection)NPT PTFEHP-2103123BSP Suction/Dischargeports-twin(splitconnection)BSP PTFEHP-2103323 1 Suctionport-drum PTFE

4 HP-1086906 4 Shockabsorber NR/St375 HP-1089935 1 Muffler PEporous6 HP-2105423 4 Valveseat PTFE7 HP-2105923 2 Pluglower PTFE8 HP-21005523 2 Plugupper PTFE9 HP-2103923 2 Valvestopper PTFE10 HP-2103823 2 Bolt PTFE11 HP-11025450 1 Valveseatkey AISI30412 HP-11015800* 1 Upper/lowerplugkey(SK1,*-SK2) diverse13 HP-1085800 1 Airvalvekey(SK4) diverse

REPAIRKITSA TAK-038 KIT Airvalve PET/NBRW TWE-038-PTTT KIT PTFEWETKIT

2 Diaphragm TFM/PTFE

4 Valveballs PTFE

4 Sealinginlet/outlet FEP/FPM

2 Pluguppersealing FEP/FPM

1 Muffler PEporous

13966-Txxx_Rev_D_21NOV201620

T050–EXPLODEDVIEW

21

T050–PARTSLISTITEM PARTNUMBER QTY DESCRIPTION MATERIAL1 HP-2150123 2 Pumphousing PTFE2 HP-1151020 1 Centerhousing PE

3

HP-2153023

2

Suction/DischargeportsBSP PTFEHP-2153023 Suction/DischargeportsNPT PTFEHP-21512533 Suction/DischargeportsANSIFlange PTFEHP-2152533 Suction/DischargeportsDINFlange PTFEHP-21552523 Suction/DischargeportsJISFlange PTFEHP-2153123 Suction/Dischargeports-twin PTFEHP-2153323 1 Suctionport-drum PTFE

4 HP-1156906 4 Shockabsorber NR/St375 HP-1159935 1 Muffler PEporous6 HP-1154050 1 Shaft AISI3047 HP-1158522 2 Centerhousingseal PE8 HP-2155423 4 Valveseat PTFE9 HP-2155923 2 Pluglower PTFE10 HP-21505523 2 Plugupper PTFE11 HP-2153923 2 Valvestopper PTFE12 HP-2153823 2 Bolt PTFE13 HP-11554050 2 Shaftallenpinscrew AISI30414 HP-11525450 1 Valveseatkey AISI30415 HP-1085800 1 Upper/lowerplugsandairvalvekey(SK3,SK4) diverse

REPAIRKITSA TAK-050 KIT Airvalve PET/NBRW TWE-050-PTTT KIT PTFEWETKIT

2 Diaphragm TFM/PTFE

4 Valveballs PTFE

4 Sealinginlet/outlet FEP/FPM

2 Pluguppersealing FEP/FPM

1 Muffler PEporous

13966-Txxx_Rev_D_21NOV201622

T100–EXPLODEDVIEW

23

T100–PARTSLISTITEM PARTNUMBER QTY DESCRIPTION MATERIAL1 HP-2250123 2 Pumphousing PTFE2 HP-1251020 1 Centerhousing PE

3

HP-2253023

2

Suction/DischargeportsBSP PTFEHP-2253023 Suction/DischargeportsNPT PTFEHP-22512533 Suction/DischargeportsANSIFlange PTFEHP-2252533 Suction/DischargeportsDINFlange PTFEHP-22552523 Suction/DischargeportsJISFlange PTFEHP-2253123 Suction/Dischargeports-twin PTFEHP-2253323 1 Suctionport-drum PTFE

4 HP-1256906 4 Shockabsorber NR/St375 HP-1159935 1 Muffler PEporous6 HP-1254050 1 Shaft AISI3047 HP-1258522 2 Centerhousingseal PE8 HP-2255423 4 Valveseat PTFE9 HP-2255923 2 Pluglower PTFE10 HP-22505523 2 Plugupper PTFE11 HP-2253923 2 Valvestopper PTFE12 HP-2253823 2 Bolt PTFE13 HP-12554050 2 Shaftallenpinscrew AISI30414 HP-12525450 1 Valveseatkey AISI30415 HP-1085800 1 Upper/lowerplugsandairvalvekey(SK3,SK4) diverse

REPAIRKITSA TAK-100 KIT Airvalve PET/NBRW TWE-100-PTTT KIT PTFEWETKIT 2 Diaphragm TFM/PTFE

4 Valveballs PTFE

4 Sealinginlet/outlet PTFE/FPM

2 Pluguppersealing FEP/FPM

1 Muffler PEporous

13966-Txxx_Rev_D_21NOV201624

T150–EXPLODEDVIEW

25

T150–PARTSLISTITEM PARTNUMBER QTY DESCRIPTION MATERIAL1 HP-2400123 2 Pumphousing PTFE2 HP-1401020 1 Centerhousing PE

3

HP-2403023

2

Suction/DischargeportsBSP PTFEHP-2403023 Suction/DischargeportsNPT PTFEHP-24012533 Suction/DischargeportsANSIFlange PTFEHP-2402533 Suction/DischargeportsDINFlange PTFEHP-24052523 Suction/DischargeportsJISFlange PTFEHP-2403123 Suction/Dischargeports-twin PTFEHP-2403323 1 Suctionport-drum PTFE

4 HP-1406906 4 Shockabsorber NR/St375 HP-1404050 1 Shaft AISI3046 HP-1408522 2 Centerhousingseal PE7 HP-1409935 1 Muffler PEporous8 HP-2405423 4 Valveseat PTFE9 HP-2405923 2 Pluglower PTFE10 HP-24005523 2 Plugupper PTFE11 HP-2403923 2 Valvestopper PTFE12 HP-2403823 2 Bolt PTFE13 HP-14054050 2 Shaftallenpinscrew AISI30414 HP-14025450 1 Valveseatkey AISI30415 HP-1085800 1 Upper/lowerplugsandairvalvekey(SK3,SK4) diverse

REPAIRKITSA TAK-150 KIT Airvalve PET/NBRW TWE-150-PTTT KIT PTFEWETKIT 2 Diaphragm TFM/PTFE

4 Valveballs PTFE

4 Sealinginlet/outlet-SET PTFE/FPM

2 Pluguppersealing FEP/FPM

1 Muffler PEporous

13966-Txxx_Rev_D_21NOV201626

T200–EXPLODEDVIEW

27

T200–PARTSLISTITEM PARTNUMBER QTY DESCRIPTION MATERIAL1 HP-2500123 2 Pumphousing PTFE2 HP-1501020 1 Centerhousing PE

3

HP-2503023

2

Suction/DischargeportsBSP PTFEHP-2503023 Suction/DischargeportsNPT PTFEHP-25012533 Suction/DischargeportsANSIFlange PTFEHP-2502533 Suction/DischargeportsDINFlange PTFEHP-25052523 Suction/DischargeportsJISFlange PTFEHP-2503123 Suction/Dischargeports-twin PTFEHP-2503323 1 Suctionport-drum PTFE

4 HP-1406906 4 Shockabsorber NR/St375 HP-1504050 1 Shaft AISI3046 HP-1508522 2 Centerhousingseal PE7 HP-1509935 1 Muffler PEporous8 HP-2505423 4 Valveseat PTFE9 HP-2505923 2 Pluglower PTFE10 HP-25005523 2 Plugupper PTFE11 HP-2503923 2 Valvestopper PTFE12 HP-2503823 2 Bolt PTFE13 HP-15054050 2 Shaftallenpinscrew AISI30414 HP-15025450 1 Valveseatkey AISI30415 HP-1085800 1 Upper/lowerplugsandairvalvekey(SK3,SK4) diverse

REPAIRKITSA TAK-200 KIT Airvalve PET/NBRW TWE-200-PTTT KIT PTFEWETKIT 2 Diaphragm TFM/PTFE 4 Valveballs PTFE

4 Sealinginlet/outlet-SET PTFE/FPM

2 Pluguppersealing FEP/FPM

1 Muffler PEporous

13966-Txxx_Rev_D_21NOV201628

THISPAGELEFTINTENTIONALLYBLANL

29

Warranty

WARRANTY.AllAll-FloproductsshallbecoveredbythestandardAll-FloLimitedWarrantyineffectatthetimeofshipment.Thiswarranty(whichmaybemodifiedbyAll-Floatanytime)provides:MATERIALSSOLDAREWARRANTEDTOTHEORIGINALUSERAGAINSTDEFECTSINWORKMANSHIPORMATERIALSUNDERNORMALUSE(RENTALUSEEXCLUDED)FORFIVEYEARSAFTERPURCHASEDATE.ANYPUMPWHICHISDETERMINEDTOBEDEFECTIVEINMATERIALANDWORKMANSHIPANDRETURNEDTOALL-FLO,SHIPPINGCOSTSPREPAID,WILLBEREPAIREDORREPLACEDATALL-FLO’SOPTION.CUSTOMERSHALLNOTIFYALL-FLOINWRITINGWITHIN30DAYSOFANYCLAIMEDDEFECTS.NOMATERIALSCANBERETURNEDWITHOUTTHEPRIORCONSENTOFALL-FLO,ANDIFAPPROVEDSHALLBERETURNEDTOALL-FLOFREIGHTPREPAID.ALL-FLO’SLIABILITYFORANYBREACHOFTHISWARRANTYSHALLBELIMITEDTOEITHERREPLACEMENTOFTHEMATERIALSOR,ATALL-FLO’SSOLEOPTION,THEREFUNDOFTHEPURCHASEPRICE.ALL-FLOSHALLNOTBEHELDLIABLEFORANYINCIDENTALORCONSEQUENTIALDAMAGESCAUSEDBYBREACHOFTHISWARRANTY.THISEXCLUSIONAPPLIESWHETHERSUCHDAMAGESWERESOUGHTBASEDONBREACHOFWARRANTY,BREACHOFCONTRACT,NEGLIGENCE,STRICTLIABILITYINTORT,ORANYOTHERLEGALTHEORY.FURTHER,ALL-FLOSHALLNOTBELIABLEFORLOSSES,DELAYS,LABORCOSTS,ORANYOTHERCOSTOREXPENSEDIRECTLYORINDIRECTLYARISINGFROMTHEUSEOFMATERIALS.ALL-FLO’SLIABILITYISEXPRESSLYLIMITEDTOTHEREPLACEMENTORREPAIROFDEFECTIVEGOODS,ORTHETOTALVALUEOFSUCHGOODS.THISWARRANTYISINLIEUOFALLOTHERWARRANTIES,WHETHEREXPRESS,IMPLIED,ORORALINCLUDINGTHEIMPLIEDWARRANTYOFMERCHANTABILITY,ANYIMPLIEDWARRANTYOFFITNESSFORAPARTICULARPURPOSE,ANDANYIMPLIEDWARRANTIESOTHERWISEARISINGFROMACOURSEOFDEALINGORTRADE.All-Flowillnot,inANYevent,beliableforanylossofprofit,interruptionofbusinessoranyotherspecial,consequentialorincidentaldamagessufferedorsustainedbyCustomer.All-Flo’stotalmaximumliabilitytothecustomerinrespectofsaleofmaterialsorservicesrenderedbyAll-FloislimitedtothetotalmoniesreceivedbyAll-Flofromthecustomerfortheparticular.MaterialsdescribedinCustomer’sorder.All-Flodoesnotwarrantanypartorcomponentthatitdoesnotmanufacture,butwillassigntotheoriginalend-userpurchaserofanywarrantyreceivedbyitfromthemanufacturer,toextentsuchpassthroughispermittedbythemanufacturer.

13966-Txxx_Rev_D_21NOV201630

All-FloPumpCo.

7750TylerBlvd. Mentor,Ohio44060USAPhone+440.354.1700Fax:+440.354.9466

sales@all-flo.com

www.all-flo.com

13966-Txxx_Rev_C