Field Bus System; Driving Total Productivity Management

Course Objective: This course covers the development of the ANSI/ISA-50.02 standard, which is the driving force behind the Foundation fieldbus technology. Other industrial bus systems are compared to Foundation fieldbus technology. Both Foundation fieldbus H1 (31kbits/sec) and High-Speed Ethernet (100Mbits/sec) buses are discussed. The benefits and cost savings of Foundation Fieldbus technology compared to 4-20mA field technology are covered, as well as how Foundation fieldbus segments are put together and configured.

This course has been designed to improve the following competences To design the fieldbus segment To configure the system software To organize the communication sequence inside the system To implement the function blocks in PID control loops To master the practical aspects of the fieldbus system

Who Should AttendInstrumentation and control first and senior engineerInstrumentation and control technician and senior technicianProject engineer

Course Content Field Bus Devices

o Transmitterso Smart positionerso Switching junction boxeso Communicator 475

Foundation Field bus Technology Overviewo System operation and principleso Multi-variable deviceso Cables savingso One protocol o Local control

Foundation Fieldbus Architectureo Installation Aspects.o Network/segment topologieso Wiring o Power, grounding and lightning protectiono Intrinsically safe (IS) installationso Intrinsically safe concept (FISCO) installations

Foundation Fieldbus Designo Segment loading and calculationso Risk management

Foundation Fieldbus Programmingo Function blocks and applicationso Communication cycle configuration

Introduction to industrial communication

DCS function as Host computer

Process optimization and APC through field bus

New trends for field bus system

Other Protocols

Course Duration: Three (3) Days