1150-1183 butterfly valves + um electric actuator … · 1141 gs cast iron nbr natural gas –...

1150-1183 BUTTERFLY VALVES + UM ELECTRIC ACTUATOR

Information given as an indication only, and subject to possible modifications

SECTORIEL S.A. 45 rue du Ruisseau 38290 SAINT QUENTIN-FALLAVIER – FRANCE Telephone: +33 4 74 94 90 70 – Fax: +33 4 74 94 13 95 www.sectoriel.fr / Email : [email protected]

Pages 1/4

Ref. FT1150+UM ENG

Rev. 06

Date 04/2016

FEATURES

1150-1183 butterfly valves are intended for the automatic opening /closing of very diverse fluid pipes. The valve

body is made of GS cast iron. The different configurations of the butterfly materials and of the liner make it

suitable for many applications. Wafer mounting with centring ears between PN10/16 and ANSI 150 flanges. The

ISO 5211 mounting pad enables the UM actuator to be directly assembled. The latter is suitable for S4-type

service factor, installed indoors or outdoors under shelter.

LIMITS OF USE

Fluid pressure: WP 16 bar up to DN 300

10 bar up to DN 400

Fluid temperature: WT° According to the table below

Ambient temperature -15°C / +50°C

Service factor S4 – 30% - 10 starts/h

AVAILABLE MODELS

DN 32-40 to DN 150

Connection between flanges PN10/16 and ANSI 150 RF

Supply voltages: 24V CC, 24 V CA and 230 V CA

Ref. Butterfly Liner Example of applications WT°

min

WT°

max

1141 GS cast iron NBR Natural gas – NF-ROB GAZ authorisation 5 bar -10°C +60°C

1147 316 SS NBR carboxyle Powdery - abrasive -10°C +90°C

1149 316 SS EPDM CH. Hot water -10°C +130°C

1150 GS cast iron EPDM Cold water – warm water (110°C at peak) - ACS -10°C +90°C

1151 316 SS NBR Hydrocarbon, natural gas, compressed air -10°C +90°C

1152 GS cast iron NBR Hydrocarbon, natural gas, compressed air -10°C +90°C

1153 316 SS EPDM Demineralised water – alkalis (110°C at peak) - ACS -10°C +90°C

1154 316 SS FPM Compatible aggressive fluids, petrol -5°C +150°C

1156 316 SS White NBR Compatible food fluids -10°C +80°C

1157 316 SS SILICONE Oils and fat -15°C +150°C

1158 Copper-alu NBR Seawater -10°C +80°C

1183 Polished SS Food SILICONE Food fluids (FDA authorisation) -15°C +150°C

IP 65

3.1

Cert.

ISO

9001

0409

http://www.sectoriel.fr/




Pages 2/4

Ref. FT1150+UM ENG

Rev. 06

Date 04/2016

DIRECTIVES AND MANUFACTURING STANDARDS

Item Standard ON Item Standard

Pressure Equipment Directive 97/23/EC

Cat. III modules B+C1 0409 Final test ISO 5208

ATEX Directive II 2G/D Tx zones 1,2,21 and 22 0038 Face-to-face dimension ISO 5752 series 20

Flange dimension EN 1092-1 Connection Motorisation ISO 5211

Sanitary conformity ACS No. 07 ACC LY 504

MANUFACTURING

Item Name 1147 1149 1141 1150 1152 1151 1153 1154 1156 1157 1183 1158

1 Body GS EN GJS-500-7 cast iron

2 Butterfly DN32-100 1.4408 SS

Polished SS Copper-

alu 3 Butterfly DN125-400 GS Cast

iron Stainless

steel GS EN GJS-500-7 cast iron 1.4408 SS

3 Liner NBR

carboxyle EPDM CH NBR Gaz EPDM NBR NBR EPDM FPM White NBR Silicone Food silicone NBR

4 Stem 304 SS 304 SS 304 SS 420 SS 420 SS 304 SS 304 SS 304 SS 304 SS 304 SS 304 SS 304 SS

5 O-ring NBR NBR NBR EPDM NBR NBR EPDM FPM NBR EPDM EPDM NBR

6 Ring Steel

7 Circlips Steel

8 ISO mounting pad aluminium

9 Screw 5.6 steel

10 Washer steel





Pages 3/4

Ref. FT1150+UM ENG

Rev. 06

Date 04/2016

DIMENSIONS (mm)

FLOW-RATE COEFFICIENT Kv (m3/h)

DN 32-40 50 65 80 100 125 150 200 250 300 350 400

Kv 70 109 200 334 551 901 1427 2383 3825 5659 8177 10659

DN 32-40 50 65 80 100 125 150 200 250 300 350 400

A 206 228 243 266 294 324 349 438 461 523 582 645

B 140 156 162 170 185 207 216 256 248 280 300 340

Ø De 82 102 119 135 155 185 208 270 328 381 437 486

E 33 43 46 46 52 56 56 60 68 78 78 102

Ø F 10.5 10.5 14.5 16.5 16.5 18.5 18.5 22.5 25.5 30.5 30.5 35.5

Ø G 110 125 145 160 180 210 240 295 350 400 460 515

Ø P 88 88 88 88 88 105 105 105 150 150 170 170

Ø T 18 18 18 18 18 18 23 23 23 23 23 17

Weight (kg) 2.46 3.66 4.40 4.60 6 7.60 9.20 14.7 24.7 33 39 52





Pages 4/4

Ref. FT1150+UM ENG

Rev. 06

Date 04/2016

UM ELECTRICAL MOTORISATION

The UM motorisation proposed as a standard extends to:

- IP65 plastic housing for actuator and steel gear box,

- safety coefficient of 1.3 minimum compared to the nominal torque of the valve,

- upstream / downstream pressure difference ΔP=10 bar max.

The actuator assembly is of the direct type, with aluminium motorisation mounting pad.

DN Actuator Power Time

230V AC Time

24V AC/DC Standard equipment of the actuator

32-40 UMA 3,5 10 W 10 s 15 s 2 adjustable limit switches

2 dry auxiliary contacts

Thermal protection of the motor

Stand-by manual control with key

Position visual indicator

Electrical connection:

UMA 3.5: 1 P.E. ½’’ PF

UMC 10: 2 P.E. ½’’ PF

Equipment items as options

Anti-condensation heater

40 UMA 3,5 10 W 10 s 15 s

50 UMA 3,5 10 W 10 s 15 s

65 UMA 3,5 10 W 10 s 15 s

80 UMA 3,5 10 W 10 s 15 s

100 UMC 10 25 W 8 s na

125 UMC 10 25 W 8 s na

150 UMC 15 25 W 8 s 8 s

For any other operating conditions, please contact us. * indicative time for actuator running empty

MOTORISATION OPTIONS

There are several options for which you are invited to contact our sales service:

1 actuator dimensioned for an upstream / downstream pressure difference ΔP greater than 10 bar

2 UV actuator with override by handwheel

3 anti-condensation heater

OPTIONS ON THE VALVE

1 Carbon steel body, 304 and 316 SS, bronze and aluminium

2 Carbon steel butterfly, 304 and 316 SS, copper-alu, Uranus, Hastelloy

3 Hypalon liner, silicone steam, white EPDM, natural rubber, neoprene, vulcanised

4 Stems of 420, 304, 316 SS, Hastelloy


UM 3.5 ELECTRIC ACTUATOR


SECTORIEL S.A. 45 rue du Ruisseau 38290 SAINT QUENTIN-FALLAVIER – FRANCE Telephone: +33 4 74 94 90 – Fax : +33 4 74 94 13 95 www.sectoriel.fr / Email : [email protected]

Pages 1/2

Ref. FT2206 ENG

Rev. 11

Date 03/2016

FEATURES

The UMA 3.5 electric actuator is intended for motorising, ¼ turn valves with a torque of 35Nm. With a compact construction and plastic housing, it is especially well suited for motorising small-size ball valves and butterfly valves. IP65 leak-tightness: it can be used indoors and outdoors under a shelter.

AVAILABLE MODELS

Supply voltages: 230V AC and 24V AC/DC

LIMITS OF USE

MECHANICAL FEATURES

Actuator UMA 3,5 UMA 3,5

Voltage 230V AC 24V AC / DC 230V AC

Manoeuvring time (s) 12 15s (AC)

16s (DC)

40

ISO 5211 F03 / F05 – star 14

ELECTRICAL FEATURES

Motor protection Thermal switch

Limit switches 2 adjustable switches

Auxiliary switches 2 adjustable dry switches

Anti-condensation as an option

UM 3.5 electrical connection 2 C.G. ½’’ PF

Actuator UMA 3,5 UMA 3,5

Voltage 230V AC 24V AC/DC 230V AC

Power (W) 10 3 10

Current (A) 0.25 0.15 0.25

IP Code IP 65

Ambient temperature - 10°C / +55°C

Service factor S4-30%

Gear box treated steel pinions

Torque 35 Nm

Angle of rotation 90° +/- 5°

Declutching Button

Override control by key

IP 65


UM 3.5 ELECTRIC ACTUATOR


SECTORIEL S.A. 45 rue du Ruisseau 38290 SAINT QUENTIN-FALLAVIER – FRANCE Telephone: +33 4 74 94 90 – Fax : +33 4 74 94 13 95 www.sectoriel.fr / Email : [email protected]

Pages 2/2

Ref. FT2206 ENG

Rev. 11

Date 03/2016

CONSTRUCTION

WIRING DIAGRAM 230V AC

DIMENSIONS (mm)

WIRING DIAGRAM 24V AC/DC

Housing PA 66 plastic

Cover PA 66 plastic

Gear boxes Treated steel

Stem end Star

Adjustable cams Steel

Position indicator Plexiglas


UMC ELECTRIC ACTUATOR


SECTORIEL S.A. 45 rue du Ruisseau 38290 SAINT QUENTIN-FALLAVIER – FRANCE Telephone: +33 4 74 94 90 – Fax: +33 4 74 94 13 95 www.sectoriel.fr / Email : [email protected]

Pages 1/3

Ref. FT2224 ENG

Rev. 10

Date 03/2016

FEATURES

UMC and UMCL electric actuators are intended for motorising ¼ turn valves with a torque of 100 to 150Nm. With a compact construction and plastic housing, they especially well suited for motorising small-size ball valves and butterfly valves. IP65 leak-tightness: it can be used indoors and outdoors under a shelter.

AVAILABLE MODELS

100Nm and 150Nm torques Supply voltages: 230V AC, 24V AC and 24V DC

LIMITS OF USE

MECHANICAL FEATURES

Actuator UMC10 UMC15 UMC 15L

Voltage 230V AC 230V AC 24V AC 24V DC 230V AC

Torque (Nm) 100 150

Manoeuvring time (s) 8 8 8 8 45

ISO 5211 F03 / F07 – star 17

ELECTRICAL FEATURES

Motor protection Thermal switch

Limit switches 2 adjustable switches

Auxiliary switches 2 adjustable dry switches

Anti-condensation as an option

Electrical connection 2 C.G. ½’’ PF

Actuator UMC10 UMC15 UMC 15L

Voltage 230V AC 230V AC 24V AC 24V DC 230V AC

Power (W) 25 25 25 25 25

Current (A) 0.42 0.42 0.5 0.5 0.42

IP Code IP 65

Ambient temperature

- 10°C / +60°C

Service factor S4-30%

Gear box treated steel pinions

Angle of rotation 90° +/- 5°

Declutching Without

Override control By key (except UML)

IP 65





Pages 2/3

Ref. FT2224 ENG

Rev. 10

Date 03/2016

CONSTRUCTION

DIMENSIONS (mm)

Housing PA 66 plastic

Cover PA 66 plastic

Gear boxes Treated steel

Stem end Star

Adjustable cams Steel

Position indicator Plexiglas

A 165

B 165

C 8

D 200





Pages 3/3

Ref. FT2224 ENG

Rev. 10

Date 03/2016

WIRING DIAGRAM 230V AND 24 V AC

WIRING DIAGRAM 24V DC

230 V AC 24 V AC

1 Common

3 Opening phase

4 Closing phase

5 Switch powered open

6 Switch powered closed

7 Heater

8 Heater

C LS3 auxiliary common Opening

NO NO switch Aux. Opening LS3

NC NC switch Aux. Opening LS3

C LS4 auxiliary common Closing

NO NO switch Aux. LS4 Closing

NC NC switch Aux. LS4 Closing

1 wiring with +

3 wiring with -

Bridge between 3 and 4 opening

4 disconnected closing

5 Switch powered open

6 Switch powered closed

7 Heater

8 Heater

D1 Common auxiliary No. 1

D2 NO switch Aux. No. 1

D3 NC switch Aux. No. 1

C1 Common auxiliary No. 2

C2 NO switch Aux. No. 2

C3 NC switch Aux. No. 2


1150-1183 butterfly valves + um electric actuator … · 1141 gs cast iron nbr natural gas –...

Documents