112 variable spring supports for a furnace application — the pipe supports blog-10092013
TRANSCRIPT
7/27/2019 112 Variable Spring Supports for a Furnace Application — The Pipe Supports Blog-10092013
http://slidepdf.com/reader/full/112-variable-spring-supports-for-a-furnace-application-the-pipe-supports 1/5
0
0
Ex p e r i e n c e d M a n u f a c t u r e r o f P ip e S u p p o r t s s i n c e 1 9 7 8 Call Us: (713)
Home > Engineered Spring Supports > 112 Variable Spring Supports for a Furnace Application
112 Variable Spring Supports fo r a Furnace Application
September 9th, 2013 Ray
PT&P designed and fabricated 112 variable spring supports for a furnace application at an oil refinery inCalifornia. The spring cans are fabricated from carbon steel, vary from 36″ to 54″ in height and designed to
operate at 400°F. The furnace cans are designed for operating loads ranging from 180 lb. to 1,400 lb. and
movements from 1″ to 5″. The customer specified a custom paint system of two part iron oxide blue finish for the cans to comply with refinery conditions. Load tests were performed on the assemblies prior to shipmentto determine the operating load and variability.
Categories: Engineered Spring Supports Tags: Furnace Cans, Variable Springs
Comments are closed.Design Secrets of Slide Plates & Pipe Rollers Webinar Brand New Webinar! Engineered Spring Supports
(Practical, Hands-on Approach)
Share This
Request Information
Home About Us Products Photo Gallery Services Catalogs Downloads
Blog
Variable Spring Supports for a Furnace Application — The Pipe S... http://www.pipingtech.com/blog/2013/09/09/112-variable-spring-suppo...
5 19.09.2013 07:14
7/27/2019 112 Variable Spring Supports for a Furnace Application — The Pipe Supports Blog-10092013
http://slidepdf.com/reader/full/112-variable-spring-supports-for-a-furnace-application-the-pipe-supports 2/5
7/27/2019 112 Variable Spring Supports for a Furnace Application — The Pipe Supports Blog-10092013
http://slidepdf.com/reader/full/112-variable-spring-supports-for-a-furnace-application-the-pipe-supports 3/5
7/27/2019 112 Variable Spring Supports for a Furnace Application — The Pipe Supports Blog-10092013
http://slidepdf.com/reader/full/112-variable-spring-supports-for-a-furnace-application-the-pipe-supports 4/5
7/27/2019 112 Variable Spring Supports for a Furnace Application — The Pipe Supports Blog-10092013
http://slidepdf.com/reader/full/112-variable-spring-supports-for-a-furnace-application-the-pipe-supports 5/5
February 2001
September 2000July 2000
June 2000 April 2000
February 2000November 1999
November 1998
October 1998September 1998October 1997
September 1997 August 1996
July 1996June 1996
November 1995October 1995
September 1995 August 1995
December 1994October 1994
August 1994June 1994
May 1994 April 1994
March 1994February 1994
January 1994December 1993
November 1993October 1993
August 1993July 1993
June 1993May 1993
March 1993February 1993
January 1993May 1992
Meta
Log in
Copyright © 1992-2013 The Pipe Supports Blog
Mailing: P.O. Box 34506, Houston, TX 77234-4506 Location: 3701 Holmes Road, Houston, TX 77051
Our Subsidiaries: U.S. Bellows: Metallic & Fabric Expansion Joints, Bellows
Sweco Fab: ASME Vessels, Pig Launchers, Spectacle Blinds
Pipe Shields: Pre-Insulated Pipe Supports, Slides, Guides & Anchors
Fronek Anchor/Darling: Snubbers, Sway Struts & Sway Braces
Phone: (713) 731-0030 Toll-Free: (800) 787-5914 FAX: (713) 731-8640 [email protected]
Copyright 2011 Piping Technology and Products, Inc. All Rights Reserved. Contact Us | Privacy Policy
Variable Spring Supports for a Furnace Application — The Pipe S... http://www.pipingtech.com/blog/2013/09/09/112-variable-spring-suppo...