04 communication hand signals(nx power-lite)
DESCRIPTION
TRANSCRIPT
COMMUNICATION
INTRODUCTIONDuration : 60 minutes
Objective : At the end of this session, participant would be able to
1. Explained types of communication used for crane operations
2. Knowledge on applying common hand signal which commonly used
Communication
Communication is an important aspect on performing crane operations. Failure on applying correct communication will end with misunderstood and finally end with accident or incident to those who are at work site /surrounding .
Normally, crane operator could not be able to
judge accurately when performing lifting operations. Assistance from signalman are required.
Aim of CommunicationWhat are the aim of communication and when
are they required?
When view of operator are restricted / could not see the object for lifting
When operator view are limited or not clearWhen operator could not be able to judge
accurately
CommunicationThere are various style use for
communication. Among them are :
Hand SignalWieselBellFlagTwo Way Radio (walkie talkie)
HAND SIGNAL
Introduction : Hand Signal
Hand Signal is a basic signal which commonly used. It is a simple and most practicable way of giving signal
Must be at correct position where operator can easily observe
An organization should standardize based on their operational task
Introduction : Hand SignalSome occasion, need to have 2 signal man
when :
At a difference DistanceAt a difference Height
Boom Up and Wire Rope Down
ANY ADDITIONAL??
Currently usage of walkie-talkie and radio amateur been widely use for assisting the crane operation communication.
But Hand Signal also need to be learnt as alternative signal for standby.
Thank You