03 sep 600 communication and project setup

8/12/2019 03 SEP 600 Communication and Project Setup

1/16

SA-T TrainingOctober 20, 2010 | Slide 11MRG003731

Protection and control IED managerPCM600Communication and project setup


Section 3

Communication setup at

IED side

PC side

PCM600 project handling

Creation/deletion of projects

Handling of IED objects

License Update (read order options)

Technical key (only for 650 series)

Export/Import

Report parameters

HW tool

Contents


2/16


Section 3

With this presentation You will learn

What is needed to establish the communication between the physical

IED and PCM600. How to set IP addresses for the IED objects in PCM600 and also for the

engineering PC itself running PCM600

Impact of sub networks

How to manage projects with PCM600

Creation of projects

Deletion of projects

Import/export functionality

Basic HW configuration done with the HW tool

What to learn with this chapter


Section 3

Communication protocols

TCP/IP

IEC61850 communication connectivitypackage used

SPA (only 670 series)

LON (only 670 series)

IED Ethernet ports

Front port

Galvanic

Rear port(s)

Optic

Two channels possible for 670 series

One channel only for 650 series

Communication setup IED PC


3/16


Section 3

IED Front port

Default IP address 10.1.150.3

Default Subnet mask 255.255.255.0

PC port setting

IP address 10.1.150.1 up to 254

Subnet mask 255.255.255.0

Crossed over Ethernet cable

If direct connection from PC to IED

IED Front has DHCP server Dynamically assign IP address to the PC

Ethernet IED Front connection


Section 3Ethernet Optic network

RX TX RX TX

Ethernet switch

IP: 172.16.0.11

Optical cable

IP: 172.16.0.10

IP: 172.16.0.12

IP: 172.16.0.13

IED Rear port

Default IP address 192.168.1.10

Default Subnet mask 255.255.255.0

This is an example of Class B networkaddressing concept

The two first segments

Defines the Network

The two last segments

Define the Nodes

Rear Ethernet port NO DHCP server

Note! All devices that shall communicatewith each other must belong to the samesub network

Mask: 255.255.0.0

Mask: 255.255.0.0

Mask: 255.255.0.0

Mask: 255.255.0.0


4/16


Section 3

Ethernet port settings at PC side

No settings in PCM600 for Ethernet port of PC, use WINDOWS control panel

Set TCP/IP properties on the connection to be used for the PCM600/IED communication


Section 3IED Ethernet port settings

The IP address of the IEDobject in PCM600 can be set intwo ways;

When creating the IED object in

PCM600, the IP address can beset in the ConfigurationWizard

Opening Properties at IEDlevel object and changing theIP Address property


5/16


Section 3

PCM600 project handling

Manage projects

Create the plant structure

Create the IED objects


Section 3Manage Projects

Open/Manage projects

Create projects

Delete projects

Export projects

All data within the PCM600project is exported to a file withextension .pcmp.Used for back-up purposes.

Import projects

Use earlier exported .pcmp file

Rename projects


6/16


Section 3

Create the Plant Structure

Two ways to create objects;

Drag and drop from object types

Right click on object, select New

When creating IED objects, theconfiguration wizard isautomatically started

Note:Only one substation level is allowed


Section 3Create the IED objects

Configuration modes

Online configuration

IED available

Offline configuration

No IED available

Use order files

Note: Not possible to

communicate betweenPCM600 and IED via SPAand LON for the 650 series

Select the protocol to usefor the PCM600/IEDcommunication


7/16


Section 3

Create the IED objects, Online configuration

Set IP address to use

Different default valuesfor Front and Rear

port, otherwise nomeaning with the Portselection

IED type, version, display type (Local HMI) andhousing (size of the IED) is automaticallydetected in online mode (Use the Scan button)


Section 3Create the IED objects, Offline configuration

IED version must be selectedmanually

Order option file available

Enables only ordered SW and HW

in PCM600 No need to synchronize PCM600

and physical IED

No order option file available

Enables all functionality in PCM600

Need to synchronize PCM600 andphysical IED, use the LicenseUpdate Tool

Possible to configure functionality in

PCM600 that later will not beaccepted by the IED


8/16


Section 3

Plant Structure, basics

Two main sections

IED configuration structure

Contains basic functionality such as forexample communication addresses andHW

Application configuration structure

Contains the configuration dataconfigured with ACT.

Synchronized with the Main Applicationstructure configured with ACT.


Section 3License update Tool

Synchronizes PCM600 IED object withphysical IED capabilities when it comesto;

Function options

Hardware options


9/16


Section 3

Technical Key(not applicable for 670 series)

Is used for security reasons, moredifficult to communicate with the wrongIED since the technical key at IEDobject in PCM600 and in physical IEDmust match.

Unique identifier for each object in thePlant Structure

Is set automatically by PCM600

Can be modified by the user

To synchronize PCM600 and IED

technical key, use the Set TechnicalKey Tool

To change the technical key inPCM600 only, go to object propertiesfor the IED object


Section 3Set Technical Key

Technical key options

Use IED Technical key

Use PCM600 Technical key User-defined Technical key

No special characters

Max length 13 characters

No numbers in the beginning

Note that changing the Technical keymight have an impact on the IEC61850configuration in your system


10/16


Section 3

Export IED object

Purpose: Make backup of and reuse aconfigured IED

Contains all configured data for the IED Application Configuration

Signal Matrix

Parameter Setting

Graphical Display

Communication Management (DNP)

SCL information

Hardware configuration

File extension is .pcmi


Section 3Import IED object

Purpose: To reuse a previouslyconfigured IED object (pcmi file)

Import of pcmi files can be made at theBay level object in PCM600


11/16


Section 3

Create Template

Purpose: To reuse a configured IED

In a pre-defined place

For quick access

Creation of template

Right click IED object

Creates a .pcmt file

Ends up in PCMDatabases\Templates

Contains all configured data

Same contents as the pcmi file


Section 3Create new IED object from Template

Purpose: To reuse a configured IED

Initiated from the Bay level object

New->Create from Template

Templates structured based on IEDtype


12/16


Section 3

IEC 61850 configuration SCD

SCD file

Substations Configuration Description

Contents

SCL information for all IEDs within thesubstation

Export/Import of SCD file

Done at Substation level

SCL engineering done outsidePCM600, export/import functionality

needed.

Note! When importing SCL files to PCM600, be sure to import an SCLfile that correlates with the PCM600 project or you might loose data


Section 3IEC 61850 configuration ICD

ICD file

IED Capability Description

Contents

All thats configured in the IED beforethe system configuration

No SA Section

No Communication section

IEDName = TEMPLATE

Usage

System engineering

Merging to an SCD file

Export/Import of ICD file

At IED level


13/16


Section 3

IEC 61850 configuration CID

CID file

Configured IED Description

Contents

Extract of the SCD file

SCL information for one specific IED

Export/Import of ICD file

At IED level


Section 3Report Parameters

Footer information for printouts

Application configuration

Local display, Graphical display editor

Parameter settings

Communication management


14/16


Section 3

Hardware Configuration

Possible to manually configure HW/slot positions

This information is already available if you havecreated the IED object in online mode

Select correct card type in correct slot position


Section 3Hardware Configuration

Compare configuration

Reads hardware configuration from theIED and compares with the HWconfiguration made in PCM600

Make sure that the HW configurationmatches with your physical IED beforeyou do any other configuration e.g. withACT or SMT otherwise you might need tospend time on reconfiguration.


15/16


Section 3

Hardware Configuration, parameterization

Parameter Setting

Short-cut to parameters/settings for

the HW when HW tool is open Select HW module from hardware

configuration list

Press Parameter Setting button intoolbar menu that will issue the PST

Only change of parameters possiblewhen opening PST from the HWtool.Read/Write with the IED done fromordinary PST, e.g. open PST from

the Plant Structure.


Section 3Time for exercise!Ex 2


16/16


Section 3

03 sep 600 communication and project setup

Documents