00 indelval brochure 2006 final (page 1)€¦ · economic efficiency during installation •easy...
TRANSCRIPT
1
Indelval rubber flooring,The quality that lasts as time goes by.
rubber flooring
Product Range
RU
BB
ER F
LOO
RIN
GGeo Plus
Geo TX
Mirage 2000 Plus
Mirage 2000 TX
Indelcol Plus
Indelcol TX
Mirage
Cenica
Ecoval Plus
Ecoval TX
Clasica
Deco
Cerama
Leganti
Textura
Deco Tread
Cerama Tread
Solval
M2000 Conductive
Ecosport
Ecoval Bus
ndelval has been exclusively dedicated to
high-quality rubber flooring manufacturing
for more than 30 years, accompanying and chal-
lenging the tendencies of modern architecture.
Constant interest in developing and improving
its products has lead Indelval to have presence in
the five continents.
Indelval rubber flooring are manufactured with
the highest quality and their extreme wear resist-
ance make them ideal to resist the hardest
demands of use.
Its decades of experience in close collaboration
with building proffesionals and buyers have turned
Indelval into one of the most prestigious and inno-
vatory rubber flooring manufacturers of the world.
The development of a high pressure system for
rolls and tiles, along with its modern facilities,
allows Indelval to have an incomparable flexibility
and quick response.
Indelval offers a wide range of alternatives and
solutions for the different areas, such as architectur-
al buildings, transport, industries and special areas
like: clinics, hospital, old peoples residential homes,
pharmaceutical labs, banks, shops, schools, universi-
ties, gyms, multipurpouse halls, office buildings,
buses, trains and ships.
Abou
t Ind
elval
32
Indelval: quality, durabilityand modern designsin rubber floorings.
Companyrubber flooring
I
One of two Indelval´s manufacturing plants. Pilar - Buenos Aires - Argentina
Indelval´s showroom. Martínez - Buenos Aires - Argentina
ombination possibilities are almost infinite.
Indelval rubber floorings offer a wide range of
standard colors, modern and attractive designs
together with specially designed surfaces to fulfill
the highest demands.
Design
Prod
uct c
hara
cteris
tics
54
rubber flooring
related aspects
Limits beyond imagination.
• More than 120 standard colours.
• More than 8 kind of surfaces.
• More than 1,000 possible combinations.
• Technical solutions with harmonious designs.
C
Elevators entrance - UADE / Universidad Argentina de la Empresa - Argentina
Library - UADE / Universidad Argentina de la Empresa - Argentina
Library - UADE / Universidad Argentina de la Empresa - Argentina
Economic efficiency during installation
• Easy installation: Commonly used tools and mate-
rials for other flexible floorings.
• Weights and dimensions easy to handle.
• Flexible, resilient and easy to cut material.
• Technical support service: Back up during all the
stages of the project (planning, tenders, subfloor
preparation, installation and cleaning and mainte-
nance), including installation training courses.
Economic efficiency during use
• Extremely long life cycle.
• Extreme wear resistance.
• High footfall sound absorption.
• Dimensionally stable.No joint sealing is necessary.
• Efficient cleaning due to the exclusive high pres-
sure system, in rolls and tiles, that grants an
extremely dense surface not requiring the appli-
cation of acrylic coatings.
Economic
Prod
uct c
hara
cteris
tics
76
rubber flooring
performanceEco-compatible
l High quality raw materials only: Natural and syn-
thetic rubber, mineral loads from natural sources
and eco-friendly color pigments.l Eco-compatible production procedures: no
generation of toxic agents during manufac-
turing (gases, solids nor liquids).l High percentage of recycled material during
production process.l Only recyclable materials for packaging.l Free of PVC, plasticizers (phthalate), halogens (e.g.
chlorine), formaldehydes and heavy metals.l Free of asbestos.l In the event of fire there is no generation of
hydrogen chloride gas, dioxins, furans or
cyanide based compounds, which are very
hazardous for people´s health and also for
equipment.l High wear resistance ensures long useful
lifetime avoiding draining on precious natu-
ral resources.lThe exclusive high pressure system, in rolls
and tiles, grants an extremely dense surface
not requiring the application of acrylic coat-
ings - reducing the amount of wasted water
used for cleaning.
l As Indelval rubber flooring do not contain
plasticizers, (phthalate), halogens (e.g. chlo-
rine), formaldehydes and heavy metals
which might contaminate ground water,
they can be disposed in landfills*.
*It is allowed in most of the countries. Please consult your locallegislation.
Commitmentto the environment.
Indelval´s great experience and the top-quality ofour rubber floorings become tangible economicadvantages during installation and use.
Library - Universidad de La Matanza - Argentina
Bariloche - Patagonia - Argentina
Pampa´s landscape - Argentina
High quality raw materials
Eco-friendly color pigments.
Indelval rubber flooring outstandingproperties
l Durability: Extreme wear resistance.
l Extremely long life cycle.
l Environmentally compatible.
l Easy and economic maintenance.
l Dimensionally stable. No joint sealing is necessary.
l Excellent cigarette burn resistance. No surface
damage. Nicotine stains can be easily removed.
l Extremely dense surface prevents the prolifera-
tion of mites and bacteria.
l Excellent fire resistance behaviour.
l Comfortable walking: Permanent resilience and
flexibility.
l High footfall sound absorption: Reduces ambient
reverberation time and impact sound.
l High resistance to chemicals.
l Antistatic
l Anti slip properties.
Product properties for specialrequirements
Electrostatic conductive; according NFPA 99 - operat-
ing theatres, laboratories and servers.
l Extreme impact resistance: gyms and multi-pur-
pouse halls.
l Raised access floors solutions.
l Indoor sport flooring. Reduction of injury risks.
Excellent bounce characteristics.
Characteristics
Conte
nts
98
rubber flooring
From top:
Information counter.
Escalators landing area.
Out patient waiting room.
Hospital facade.
Shanxi Provincial People´s HospitalTaiyuan, Shanxi, China.
Product: Mirage 2000 Plus
2
4
6
7
8
10
12
14
16
18
20
22
24
26
28
30
36
38
40
42
43
44
Company
Design related aspects
Economic Performance
Eco-compatible
Characteristics
Geo Plus
Geo TX
Mirage 2000 Plus
Mirage 200 TX
Indelcol Plus
Indelcol TX
Mirage
Cenica
Ecoval Plus
Ecoval TX
Studded tiles
M2000 Conductive
Ecosport
Ecoval Bus
Stairs solutions
Accesories
Technical data
Offices - Universidad de La Matanza - Argentina
Index
Geo Plus
Geo P
lus
1110
rubber flooring
NORMANDIA NILO JAVA AMAZONAS
ALASKA ARTICO SIBERIA TERRANOVA
ARIZONA ISLANDIA ANTILLA TROPICO
ARABIA SAHARA TIBET
DANUBIO ATLANTICO BIRMANIA
Geo TX
Geo T
X
1312
rubber flooring
mm. kg/m2
2,3 / 2,0 4,0 / 3,6
A
B
A x B (m)
1,12 x 12
PACK
uni.
20 / 150 x 50 / 61 x 61
cm.
Homogeneous
ALASKA ARTICO SIBERIA TERRANOVA
ARIZONA ISLANDIA ANTILLA TROPICO
ARABIA SAHARA TIBET
DANUBIO ATLANTICO BIRMANIA
NORMANDIA NILO JAVA AMAZONAS
MAREA DIAMANTE SEPIA GRIS MEDIO
ROSA NEON OASIS BEIGE CALIPSO
NAUTILUS OCEANICO
ESMERALDA LINO
Mirage 2000 Plus
Mira
ge 20
00 P
lus
1514
rubber flooring
Mirage 2000 TX
Mira
ge 20
00 TX
1716
rubber flooring
MAREA DIAMANTE SEPIA GRIS MEDIO
ROSA NEON OASIS BEIGE CALIPSO
NAUTILUS OCEANICO
ESMERALDA LINO
Indelcol Plus
Indelc
ol Plu
s
1918
rubber flooring
MARFIL (B) ADRIATICO (C) NEGRO (A) TERRACOTA (B)
ADRIATICO (C) AZUL (D))
On
e co
lou
red
Mar
ble
d c
olo
urs
BEIGE (C) IBIZA (C) ROBLE (C) IBERICO (D)
ROSA NEON (C) TERRA (C) NAUTILUS (C) PRUSIA (D)
GRES (B) SEPIA (B) TOPO (B) LIQUEN (C)
Indelcol TX
Indelc
ol TX
2120
rubber flooring
BEIGE (C) IBIZA (C) ROBLE (C) IBERICO (D)
ROSA NEON (C) TERRA (C) NAUTILUS (C) PRUSIA (D)
GRES (B) SEPIA (B) TOPO (B) LIQUEN (C)
Mar
ble
d c
olo
urs
Mirage
Mira
ge
2322
rubber flooring
NORMANDIA SAHARA ALASKA BALTICO
ESMERALDA ARIZONA URAL ATLANTICO
OCEANICO TROPICO TERRANOVA BIRMANIA
Cenica
Cenic
a
2524
rubber flooring
GALA NANTES VELADA POLAR
ARENA TRAFUL EGEO MANANTIAL
SARAO FIESTA ZAFIRO ONIX
Ecoval Plus
26
Ecov
al
27
rubber flooring
BEIGE DUNA BOREAL GRIS ESPACIAL VERDE ALGA
CRISTAL
ALUMINA CAMPUS LAGO NATURAL
SOLAR
Ecoval TX
Ecov
al
2928
rubber flooring
BEIGE DUNA BOREAL GRIS ESPACIAL VERDE ALGA
CRISTAL
ALUMINA CAMPUS LAGO NATURAL
SOLAR
Clasica
Stud
ded t
iles
3130
rubber flooring
Deco
Colour range available for Clasica, please refer to Studded Tiles colour range. (page 33) Colour range available for Deco, please refer to Studded Tiles colour range. (page 33)
Cerama
Stud
ded t
iles
3332
rubber flooring
Leganti
Colour range available for Cerama, please refer to Studded Tiles colour range. (page 33) Colour range available for Leganti, please refer to Studded Tiles colour range. (page 33)
Textura
Stud
ded t
iles
3534
rubber flooring
Studded tiles colour chart
GLACIAR (C) ADRIATICO (C) AZUL (D) COBALTO (D)
LACAR (C) GRIS (B) CHARCOAL (B) NEGRO (A)
SALVIA (C) V. MANZANA (C) V. INGLES (C) PETROLEO (C)
A. ESPACIAL (C) TERRACOTA (B) COLONIAL (B) MODENA (C)
MAUVE (C) MORA (C) M. AFRICANO (B)
FORESTA (C) CEMENTO (C) BEIGE (C) OCRE (B)
BORGOÑA (C)
Colour range available for Textura, please refer to Studded Tiles colour range. (page 33)
Ecos
port
38 39
rubber flooring
Ecosport
CELESTE AZUL BEIGE TERRACOTA
VERDE
Ecosport-R
Ecosport-E.S.E.
Ecosport - R and Ecosport - E.S.E. can also be delivered in Mirage 2000 TX, Geo TX and Cenica colour range.
Ecosport - E.S.E. has a simple and practical
installation system that requires no adhesive.
Therefore it´s transportable and also easy to be
removed whenever is needed.
50 cm.
50 cm.
rubber flooring
Ecov
al Bu
s
40 41
Ecoval Bus
AZUL APOLO GRIS METAL GRIS ACERO VERDE CYRANO
AZUL BERMUDA GRIS ESPACIAL
rubber flooring
Acce
sorie
s
42 43
rubber flooring
AccesoriesStairs solutions
Welding rodsWelding rods to match Indelval rubber flooring are available.
4 mm. / Rolls: 100 ml
Important note: Indelval rubber flooring do not need to be sealed because
they do not contain volatile plasticizers which may cause dimensional sta-
bility problems after installation. However, joint sealing could be recom-
mended for decorative purpouses or in areas with special requirements
such as:
l Laboratories.
l Operating theaters.
l Rooms with intensive wet cleaning.
l Other areas with special hygienic requirements.
Profiles for sanitary systemProfile S -16 This piece shapes the sanitary skirting board, allowing installation
of rubber flooring on it.
Profile S -10 This piece was developed to complete the sanitary skirting board
in order to avoid horizontal edges where dirt could be placed.
Cerama Tread
Solval
Stair
s solu
tions
Colour range available for Deco Tread, Cerama Tread and Solval, please refer to Studded Tiles colour range.
(page 33)
Deco Tread
Propiedades EN 1817 / IRAM 113076 Método de ensayo Requerimientos Properties EN 1817 / IRAM 113076 Test method RequirementsEstabilidad dimensional EN 434 +/- 0,4 %
Dimensional stability
Resistencia a la quemadura de cigarrillo EN 1399 Proc. A level => 4
Cigarette burn resistance Proc. B level => 3
IRAM 113070 >= 2 Escala de grises
>= 2 Gray scale
Flexibilidad EN 435, proc. A Diam. 20 mm, sin fisuras
Flexibility Diam. 20 mm, no fissuring
Dureza ISO 7619 >= 75 Shore A
Hardness IRAM 113003
Indentación residual EN 433 EN 1817: Mean value =< 0,15 mm
Residual indentation at thickness < 2,5 mm
EN 1817: Mean value =< 0,20 mm
at thickness => 2,5 mm
IRAM 113072 <= 0,15 mm
Resistencia a la abrasión ISO 4649, proc. A (5 N) <= 250 mm3
Abrasion resistance IRAM 113071 <= 0,8 mm deep
Decoloración a la luz artificial EN 20 105-B02, met. 3 >= 6 blue scale
Colour fasteness to artificial light >= 3 grey scale
Absorción de agua IRAM 113074 <= 0,5 %
Water absorption
Resistencia al fuego IRAM 113076, proc. 6.6 Autoextingible
Fire resistance Self extinguishing
Envejecimiento IRAM 113076, proc. 6.7 Sin fisuras
Aging No fissuring
Resistencia U.V. IRAM 113076, proc. 6.8 >= 4 Escala de grises
U.V. Resistance >= 4 Gray scale
Propiedades adicionalesAdditional propertiesComportamiento al fuego DIN 4102
Fire behaviour EN 13 501-1
Toxicidad de gases DIN 53436
Toxicity of fire gases
Fujo radiante crítico ASTM E 648
Critical radiant flux IRAM G77014
Densidad de humos ASTM E 662
Fume density IRAM 13474
Velocidad de propagación de llama FMVSS 571.302 <= 102 mm / min
Surface flammability CNRT 72-93
ISO 3795
Prop. antideslizantes – Coef. fricción estática IRAM 113075
Anti-slip properties - Static friction coefficient
Absorción sonora DIN 52210
Improvement in footfall sound absorption
Efectos a los químicos EN 423
Effect of chemicals
Propiedades de aislación eléctrica ASTM D 257
Electrical insulation properties
Carga estática al ser caminado EN 1815
Electrical propensity when walked upon
Efecto de silla de castor EN 425
Effect of castor chair
Comportamiento eléctrico Electrical behaviourResistencia a tierra & resistencia superficial NFPA 99 2,5x104 Ohm< X <106 Ohm
Ground resistance & surface resistance ASTM F150:1998
Tech
nical
data
4544
(1) Resultados promedio de controles de fabricación - Average test results from manufacturing control.(*) Dependiendo del tiempo de exposición y la concentración. Información adicional a su disposición.(*) Depending on exposure time and concentratoin - Additional information is available on request.Deberán ser aceptadas las variaciones de colores debido a diferentes lotes de producción asi como alteraciones técnicas para mejorar el producto.Colour variations due to different production batches as well as technical alterations to improve the product have to be accepted.
Mira
ge 20
00 TX
Geo T
X
Propiedades EN 1817 / IRAM 113076 Método de ensayo Requerimientos Properties EN 1817 / IRAM 113076 Test method RequirementsEstabilidad dimensional EN 434 +/- 0,4 %
Dimensional stability
Resistencia a la quemadura de cigarrillo EN 1399 Proc. A level => 4
Cigarette burn resistance Proc. B level => 3
IRAM 113070 >= 2 Escala de grises
>= 2 Gray scale
Flexibilidad EN 435, proc. A Diam. 20 mm, sin fisuras
Flexibility Diam. 20 mm, no fissuring
Dureza ISO 7619 >= 75 Shore A
Hardness IRAM 113003
Indentación residual EN 433 EN 1817: Mean value =< 0,15 mm
Residual indentation at thickness < 2,5 mm
EN 1817: Mean value =< 0,20 mm
at thickness => 2,5 mm
IRAM 113072 <= 0,15 mm
Resistencia a la abrasión ISO 4649, proc. A (5 N) <= 250 mm3
Abrasion resistance IRAM 113071 <= 0,8 mm deep
Decoloración a la luz artificial EN 20 105-B02, met. 3 >= 6 blue scale
Colour fasteness to artificial light >= 3 grey scale
Absorción de agua IRAM 113074 <= 0,5 %
Water absorption
Resistencia al fuego IRAM 113076, proc. 6.6 Autoextingible
Fire resistance Self extinguishing
Envejecimiento IRAM 113076, proc. 6.7 Sin fisuras
Aging No fissuring
Resistencia U.V. IRAM 113076, proc. 6.8 >= 4 Escala de grises
U.V. Resistance >= 4 Gray scale
Propiedades adicionalesAdditional propertiesComportamiento al fuego DIN 4102
Fire behaviour EN 13 501-1
Toxicidad de gases DIN 53436
Toxicity of fire gases
Fujo radiante crítico ASTM E 648
Critical radiant flux IRAM G77014
Densidad de humos ASTM E 662
Fume density IRAM 13474
Velocidad de propagación de llama FMVSS 571.302 <= 102 mm / min
Surface flammability CNRT 72-93
ISO 3795
Prop. antideslizantes – Coef. fricción estática IRAM 113075
Anti-slip properties - Static friction coefficient
Absorción sonora DIN 52210
Improvement in footfall sound absorption
Efectos a los químicos EN 423
Effect of chemicals
Propiedades de aislación eléctrica ASTM D 257
Electrical insulation properties
Carga estática al ser caminado EN 1815
Electrical propensity when walked upon
Efecto de silla de castor EN 425
Effect of castor chair
Comportamiento eléctrico Electrical behaviourResistencia a tierra & resistencia superficial NFPA 99 2,5x104 Ohm< X <106 Ohm
Ground resistance & surface resistance ASTM F150:1998
Ecov
al TX
/ Eco
val P
lusCe
nica
Mira
ge 20
00 P
lusGe
o Plus
Mira
ge
93 +/- 3
<=0,05 mm
-
<=0,05 mm
180 mm 3
<= 0,6 mm deep
Resultados (1)
Results (1)
+/- 0,3 %
OK
OK
OK
OK
OK
Sin combustión
No combustion
OK
OK
B1
Cfl –s1
Gases de carbonización no tóxicos
Non toxic carbonization gases
>= 0,5 W/cm 2
<= 100 Ds
0 mm / min
> 0,5
>=8 db
91 +/- 3
<=0,05 mm
-
<=0,05 mm
190 mm 3
<= 0,7 mm deep
>=8 db
Resistente *
Resistant*
> 1010 Ohm
Antiestático, < 2kv
Antistatic, < 2kv
OK
-
-
>= 8 db [2.0 mm]
>= 10 db [2.5 & 3.0 mm]
93 +/- 3
<= 0,05 mm [2.0 mm]
<= 0,08 mm [2,5 & 3,0 mm]
<= 0,05 mm [2.0 mm]
<= 0,08 mm [2,5 & 3,0 mm]
180 mm 3
<= 0,6 mm deep
93 +/- 3
<= 0,05 mm [2.3 mm]
<= 0,08 mm [3,0 mm]
<= 0,05 mm [2.3 mm]
<= 0,08 mm [3,0 mm]
150 mm 3
<= 0,5 mm deep
>= 8 db [2.3 mm]
>= 10 db [3.0 mm]
Indelc
ol Plu
sInd
elcol
TX
Deco
/ Clas
ica / T
extur
aLe
ganti
/ Cer
ama
Deco
tread
/ Solv
alCe
rama
Trea
d
Ecos
port-
REc
ospo
rt-E.S
.E.
87 +/- 3
-
<= 0,08 mm
<= 0,08 mm
200 mm3
<= 0,7 mm deep
>=10 db
Resultados (1)
Results (1)
+/- 0,3 %
OK
OK
OK
OK
OK
Sin combustión
No combustion
OK
OK
B1
Cfl –s1
Gases de carbonización no tóxicos
Non toxic carbonization gases
>= 0,5 W/cm 2
<= 100 Ds
0 mm / min
> 0,5
Resistente *
Resistant*
> 1010 Ohm
Antiestático, < 2kv
Antistatic, < 2kv
OK
-
-
Ecov
al Bu
s
M200
0 con
ducti
ve
89 +/- 3
-
<= 0,08 mm
<= 0,08 mm
140 mm3
<= 0,5 mm deep
>= 10 db [3.0 mm]
>= 12 db [4.0 mm]
83 +/- 3
<= 0,05 mm
-
<= 0,05 mm
200 mm3
<= 0,7 mm deep
>= 8 db
88 +/- 5
-
<= 0,09 mm
<= 0,09 mm
180 mm3
<= 0,7 mm deep
>= 14 db [4.0 mm]
>= 20 db [7.0 mm]
93 +/- 3
-
<= 0,05 mm
<= 0,05 mm
140 mm3
<= 0,5 mm deep
>= 8 db
Ver aparte
See below
Antiestático, < 1kv
Antistatic, < 1kv
OK
< 106 Ohm
(1) Resultados promedio de controles de fabricación - Average test results from manufacturing control.(*) Dependiendo del tiempo de exposición y la concentración. Información adicional a su disposición.(*) Depending on exposure time and concentratoin - Additional information is available on request.Deberán ser aceptadas las variaciones de colores debido a diferentes lotes de producción asi como alteraciones técnicas para mejorar el producto.Colour variations due to different production batches as well as technical alterations to improve the product have to be accepted.
rubber flooring
Technical data
Notice
Indelval rubber floorings have been
developed for indoor installation
and they are not suitable for outdoor
applications or in particularly wet
areas.
Information given in this brochure rep-
resent descriptions or designations, but
not any warranted qualities.
Indelval reserves the right to change
product characteristics at any time.
Slight variations of products offered
may exist in relation to the colour
catalogue shown in this brochure.
This brochure, including pictures and
illustrations, is subjected to a copy-
right owned by Indelval S.A.I.C., and
may be only used with its written
approval.
INDELVAL S.A.I.C.Pje. Carabelas 1022/24, V. Madero (B1768CMB), Pcia. de Bs. As., Argentina.Tel.: (5411) 4652-5316 / -5434 / -8490 / 4655-0063 / Fax: (5411) 4655-0852Showroom: Av. Del Libertador 13154, Martínez (B1640AOP), Pcia. de Bs. As., Argentina.Tel. / Fax: (5411) 4733-6661 / -6662 / -6663E-mail: [email protected] / Internet: www.indelval.com.ar