60 •High Gain Antenna Products Guide•

S.T.L & Transmit Receive Antennas Ⅴ

Remote Control Positioner

HGP-2000A Series

The Subsystem is, installed on relay-vehicle or at ground sites, remotely controlled by Main Control Center so that antenna Mounted on this subsystem can be directed toward the relay station. This subsystem consists of positioner, control system, GPS, and antenna. Control system is manufactured to easy to operate and control the direction of antenna, which consists of position controller, position controller drive cabinet, PC and Modem.The information of location detected form GPS is transferred from this subsystem to Main Control Center on communication line. Rotation of this antenna mounted on this subsystem is available within a range of 180 degrees in the CW or CCW(counter-clock wise) direction. In con-sidering that this device is mainly installed on a high altitude regions. DECING system is also equipped at the internal part of the antenna so that Electro magnetic Interference(EMI)can be reduced with the maximum amounts even at the frozen state.

61•http://www.highgain.co.kr•

S.T.L & Transmit Receive Antennas Ⅴ

Remote Control Positioner

HGP-2000A Series

Model No.Item HGP-2000A

Antenna Size 0.9m / 1.2m(Option)

Angular Travel Azimuth(Horizontal) : 0 to 370˚Elevation(vertical) : ± 20˚

Speed Azimuth(Horizontal) : 4˚/secElevation(vertical) : 2˚/sec

Angular Allowance Azimuth(Horizontal) : 0.2˚Elevation(vertical) : 0.2˚

Angular Signal Synchro to digital Converter

Input Voltage AC 220V

Power 200w

Operation Temperature Indoor Equipment : 0˚C ~ 45˚COutdoor Equipment : -20˚C ~ 50˚C

Humidity Indoor Equipment : 20 ~ 90% RHOutdoor Equipment : 20 ~ 95% RH

Wind Operating : 40 m/secSurvival : 60 m/sec

Size Φ1890 mm

Weight(Kg) 110kg(including Antenna)

ELECTRICAL and MECHANICAL SPECIFICATIONS