zhermack product catalogue 2011-2012 eng
DESCRIPTION
Zhermack specializes in the production of materials and equipment for dental practices and dental laboratories, and provides its customers products whose trademarks are constant innovation and excellent quality. Zhermack, undisputed leader in impression material production, was founded in 1981 and quickly positioned itself among the most important companies in the dental sector. Besides its headquarters in Italy, Zhermack has branches in Germany, the United States and Poland and has Representative Offices in key locations such as Russia, United Kingdom, Spain, France, Mexico, Colombia and Turkey. The widespread distribution network, with over 800 distributors worldwide, guarantees global sales coverage.TRANSCRIPT
BranchZhermack GmbH DeutschlandÖhlmühle 10 - D-49448 MarlTel. +49 - 0 54 43 / 20 33 - 0 Fax +49 - 0 54 43 / 20 33 - [email protected]
BranchZhermapolul. Augustöwka 1402 - 981 Warszawa - PolskaTel. +48 - 22 858 82 72 - 858 73 41Fax +48 - 22 642 07 [email protected]
BranchZhermack Inc.P.O. Box 4195River Edge, NJ 07661 - 4195Tel. +1 (877) 819-6206Tel. +1 (732) 389 8540Fax +1 (732) 389 [email protected]
Representative Offi ceZhermack UK and Ireland21 Balmoral RoadMelton Mowbray, LeicsLE13 1JNTel. (0)7870 [email protected]
Representative Offi ceZhermack Russia5/2 Marshala Vasilevskogo St.123098 Moscow - RussiaTel. +7 - 0916 [email protected]
Zhermack SpAVia Bovazecchino, 100 - 45021 Badia Polesine (RO) ITALY Tel. +39 - 0425 597611 Fax +39 - 0425 53596 [email protected] www.zhermack.com
12/2
009
F211
020/
A
06/2
011
Zhermack SpAVia Bovazecchino, 100 - 45021 Badia Polesine (RO) ITALY Tel. +39 - 0425 597611 - Fax +39 - 0425 [email protected] - www.zhermack.com
GERMANYZhermack GmbH DeutschlandÖhlmühle 10 - D-49448 MarlTel. +49 - 0 54 43 / 20 33 - 0 Fax +49 - 0 54 43 / 20 33 - [email protected]
POLANDZhermapol Sp. z o.o.ul. Augostówka 1402 - 981 Warszawa - PolskaTel. +48 - 22 858 82 72 +48 - 22 858 73 11Fax +48 - 22 642 07 [email protected]
USA Zhermack Inc.P.O. Box 4195, River Edge New Jersey 07661-4195Tel. +1 (877) 819 6206 +1 (732) 389 8540Fax +1 (732) 389 [email protected]
COUNTRY CONTACTS
UK and IrelandTel. +44 - (0) 7870 [email protected]
SpainTel. 900 99 39 [email protected]
FranceTel. 0800 - [email protected]
RussiaTel. +7 916 930 [email protected]
Mexico and Central AmericaTel. +52 - 1 - 55 - [email protected]
South AmericaTel. +57 - 310 - [email protected]
BRANCHES
EN
F300
081/
A
C A T A L O G U E2011
CA
TA
LO
GU
E 2
010/
2011
2
WELCOMEZhermack specializes in the production of materials and equipment for dental practices and dental laboratories, and provides its customers products whose trademarks are constant innovation and excellent quality.
Zhermack, undisputed leader in impression material production, was founded in 1981 and quickly positioned itself among the most important companies in the dental sector.
Besides its headquarters in Italy, Zhermack has branches inGermany, the United States and Poland and has RepresentativeOffices in key locations such as Russia, United Kingdom, Spain, France, Mexico, Colombia and Turkey.
The widespread distribution network, with over 800 distributors worldwide, guarantees global sales coverage.
BEYOND INNOVATIONZhermack is one of the few companies in the dental sector around the world to synthesize polymers and catalysts completely in-house, thus ensuring control over all the phases in the manufacturing process and achieving high quality standards.
The Clinical and Technical divisions work in partnership with international researchers and leading universities so as to be able to continually propose innovative solutions for the more demanding dentists and dental technicians.
ZHERMACK CLINICAL The Clinical division provides solutions for the dentistry sector.
The market demands innovative and reliable products; Zhermack Clinical responds to the needs of dentists by creating advanced products such as the first sterile silicone for surgical use or thermochromic silicone for impressions.
The ongoing investments into research and development are aimed at putting into practice effective solutions to improve the everyday work of the dentist.
3
ZHERMACK TECHNICALThe Zhermack Technical division manufactures products and equipment for the dental laboratory market.
A quality prosthetic device is the result of using reliable materialsthat can guarantee the perfect outcome of any application;Zhermack Technical, with its nearly thirty years of experience and know-how, understands the work of dental technicians, and provides them a series of materials and equipment that can fulfill any requirement impeccably.
The solutions for dental laboratories include a vast range ofsilicones for making a matrix, model duplication and gingival reproduction on models, as well as a complete series of dental stone that, together with the numerous tools and equipment, form an integrated systems for all types of work.
TOTAL QUALITYAt Zhermack, respect for the environment is an key value.The company’s environmental culture is expressed through a carefully adopted system for managing processes, standards and procedures aimed at minimizing the environmental impact of the manufacturing technologies.
The UNI EN ISO 9001 and ISO 14001 certification confirm the importance that Zhermack attributes to total quality management, while compliance with the strictest registration standards set by the competent health authorities, such as the US Food and Drug Administration, protects the end user of Zhermack products.
Zhermack works with constant respect for man and the environment, though ongoing health checks, environmental monitoring, reduction of fume and noise emissions, and the updating of all safety standards.
FOLLOW US
“Our aim is to consolidate
Zhermack products
and leadership worldwide
pursuing, creativity, innovation and values”
4
A-SILICONES - CLINICAL
hydrorise® Putty - Normal & Fast Sethydrorise® Maxi Putty - Normal & Fast Sethydrorise® Heavy Body - Normal & Fast Sethydrorise® Maxi Heavy Body - Normal & Fast Sethydrorise® Monophase - Normal & Fast Sethydrorise® Maxi Monophase - Normal & Fast Sethydrorise® Regular Body - Normal & Fast Sethydrorise® Light Body - Normal & Fast Sethydrorise® Extra Light Body - Normal & Fast Sethydrosystemcolorise® Puttycolorise® Maxi Puttycolorise® Heavy Bodycolorise® Maxi Heavy Bodycolorise® Monophasecolorise® Maxi Monophasecolorise® Regular Bodycolorise® Light Bodycolorise® Extra Light Bodycolorise® Rigid Heavy Bodycolorise® dual archfreealgin®
freealgin® Maxielite® HD+ Putty Soft - Normal Setelite® HD+ Maxi Putty Soft - Normal Setelite® HD+ Putty Soft - Fast Setelite® HD+ Maxi Putty Soft - Fast Setelite® HD+ Tray Material - Fast Setelite® HD+ Maxi Tray Material - Fast Setelite® HD+ Monophase - Normal Setelite® HD+ Maxi Monophase - Normal Set elite® HD+ Regular Body - Normal Set elite® HD+ Light Body - Normal Setelite® HD+ Light Body - Fast Setelite® HD+ Super Light Body - Fast Setelite® P&P Putty Softelite® P&P Regular Body elite® P&P Light Body
elite® implant Light Body elite® implant Medium Body elite® implant Heavy Body
occlufast® ROCKocclufast® CADcolorbite Dcolorbite ROCK
universal tray adhesive elite® iperlink LCTelite® iperlink SCT
accessories
1213141516171819202122232425262728293031323435363738394041424344454647495051
535455
56575859
606161
62
Impression materials
Impression materials for implantology
Bite registration materials
Adhesives
5
C-SILICONES - CLINICAL
zetaplus
zetaplus SOFT
oranwash® L
oranwash® VL
thixoflex® M
orthogum
indurent gel
indurent liquid
accessories - zetaplus system
zetaflow Putty
zetaflow Light
zetaflow Catalyseur
accessories - zetaflow
hi-tray metal
hi-tray light clear
hi-tray light plastic
hi-tray light edentulous
hi-tray dual arch
64
65
66
67
68
69
70
71
72
73
74
75
76
Impression materials
TRAYS
hydrocolor 5
hydrogum® 5
hydrogum®
hydrogum® SOFT
neocolloid®
orthoprint®
tropicalgin
phase® PLUS
algitray Powder / Liquid
accessories
“LONG LIFE SYSTEM” ALGINATES
Detergent
78
79
80
81
82
83
84
85
86
87
90
91
92
93
94
6
DENTAL STONES
DISINFECTION AND STERILISATION
RELINING MATERIALS AND RESINS FOR TEMPORARY C&B
GLOVES
SILICONES FOR AESTHETIC RESTORATION AND COMPOSITE FOR CROWNS AND BRIDGES
elite® master
elite® rock
elite® rock FAST
elite® stone
elite® ortho
elite® model
elite® model FAST
elite® arti
elite® arti FAST
elite® base
gypstray
accessories
zeta 1 Ultrazeta 2 Sporexzeta 2 Enzymezeta 3 Ultrazeta 3 Softzeta 3 Foamzeta 3 Wipeszeta 4 Washzeta 5 Unitzeta 6 Hydrazeta 6 Drygelzeta 7 Solutionzeta 7 Spray
elite® soft relining
elite® super soft relining
elite® hard relining
safemix latex
safemix nitrile
elite® glass
acrytemp
Detergent
104
105
109110111112113114115116117118
119120121
125126127128129130131132133134
135
136
9697
98
100
101
7
A-SILICONES - TECHNICAL
zetalabor
titanium
indurent gel
indurent liquid
platinum 85
platinum 95
elite® transparent
gingifast ELASTIC
gingifast RIGID
elite® double 8
elite® double 16 FAST
elite® double 16 EXTRA FAST
elite® double 22
elite® double 22 FAST
elite® double 22 EXTRA FAST
elite® double 32
elite® double 32 FAST
elite® double 32 EXTRA FAST
tensilab
accessories
Siliconas para llaves
C-SILICONES - TECHNICAL
Duplication of models with lab putty & clear silicone
Debubblizing spray-solution
Duplication silicones
Gingival mask reproduction
Duplication of models with lab putty
156
157
158
159
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
8
RESINS LABORATORY
NOTE:The images and texts related at the technical data of the individual products and accessories may be changed during the period of validity the catalog. The images are only representative of this product. Not all products are sold in every country.
Acrylic resins for prosthetic bases
Zeta Sand
SANDS
172
prothyl press EVO
prothyl hi-impact EVO
prothyl thermo EVO
prothyl repair EVO
elite® SC tray EVO
elite® LC tray
prothyl polisher
prothyl isolator
Insulating gypsum - resin / gypsum - gypsum
Polishing paste
Resins for individual impression trays
162
163
164
165
166
167
168
169
notes
A-SiliconesImpression materials
hydrorise® Putty - Normal & Fast Sethydrorise® Maxi Putty - Normal & Fast Set
hydrorise® Heavy Body - Normal & Fast Sethydrorise® Maxi Heavy Body - Normal & Fast Set
hydrorise® Monophase - Normal & Fast Sethydrorise® Maxi Monophase - Normal & Fast Set
hydrorise® Regular Body - Normal & Fast Sethydrorise® Light Body - Normal & Fast Set
hydrorise® Extra Light Body - Normal & Fast Sethydrosystem
colorise® Puttycolorise® Maxi Putty
colorise® Heavy Body colorise® Maxi Heavy Body
colorise® Monophase colorise® Maxi Monophase
colorise® Regular Body colorise® Light Body
colorise® Extra Light Body colorise® Rigid Heavy Body
colorise® dual arch freealgin®
freealgin® Maxielite® HD+ Putty Soft - Normal Set
elite® HD+ Maxi Putty Soft - Normal Setelite® HD+ Putty Soft - Fast Set
elite® HD+ Maxi Putty Soft - Fast Setelite® HD+ Tray Material - Fast Set
elite® HD+ Maxi Tray Material - Fast Setelite® HD+ Monophase - Normal Set
elite® HD+ Maxi Monophase - Normal Set elite® HD+ Regular Body - Normal Set
elite® HD+ Light Body - Normal Setelite® HD+ Light Body - Fast Set
elite® HD+ Super Light Body - Fast Set
elite® P&P Putty Softelite® P&P Regular Body
elite® P&P Light Body
Impression materials for implantology
elite® implant Light Body elite® implant Medium Body
elite® implant Heavy Body
Bite registration materialsocclufast® ROCK
occlufast® CADcolorbite D
colorbite ROCK
Adhesivesuniversal tray adhesive
elite® iperlink LCTelite® iperlink SCT
accessories
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
34
35
36
37
38
39
40
41
42
43
44
45
46
47
49
50
51
53
54
55
56
57
58
59
60
61
61
62
hydrorise® PuttyNormal & Fast Set
12
Technical data Normal Set Fast Set
Packaging
Very heavy viscosity A-silicone
ISO 4823 - ADA 19
Mixing ratio Base : Catalyst
Total working time (23°C/73°F)
Time in mouth
Setting time (23°C/73°F)
Strain in compression (min - max)
Elastic recovery
Dimensional stability (after 24 h)
Hardness (Shore A)
C207010
C207011
C207012
C207013
C207070
C207071
C207072
C207073
C207074
C207075
Type 0 Putty Consistency
1:1
2:00 min
3:30 min
5:30 min
1 - 3 %
> 99 %
< -0.20 %
60 ± 2
Type 0 Putty Consistency
1:1
1:30 min
2:30 min
4:00 min
1 - 3 %
> 99 %
< -0.20 %
60 ± 2
Hydrorise Putty Normal Set 2 x 300 ml tub Hydrorise Putty Normal (Base + Catalyst)
Hydrorise Putty Fast Set2 x 300 ml tub Hydrorise Putty Fast (Base + Catalyst)
Hydrorise Putty Normal Set Economy Pack2 x 900 ml tub Hydrorise Putty Normal (Base + Catalyst)
Hydrorise Putty Fast Set Economy Pack2 x 900 ml tub Hydrorise Putty Fast (Base + Catalyst)
Trial Kit - Normal Set - 2 x 100 ml tub Hydrorise Putty Normal (Base + Catalyst) + Hydrorise Light Normal 50 ml + 6 mixing tips small/yellow + hydrosystem (1 Bottle 10 ml + 50 flocked applicators + dispensing pad)
Trial Kit - Fast Set - 2 x 100 ml tub Hydrorise Putty Fast (Base + Catalyst) + Hydrorise Light Fast 50 ml + 6 mixing tips small/yellow + hydrosystem (1 Bottle 10 ml + 50 flocked applicators + dispensing pad)
Trial Kit - Normal Set - 2 x 100 ml tub Hydrorise Putty Normal (Base + Catalyst) + Hydrorise Extra Light Normal 50 ml + 6 mixing tips small/yellow + hydrosystem (1 Bottle 10 ml + 50 flocked applicators + dispensing pad)
Trial Kit - Fast Set - 2 x 100 ml tub Hydrorise Putty Fast (Base + Catalyst) + Hydrorise Extra Light Fast 50 ml + 6 mixing tips small/yellow + hydrosystem (1 Bottle 10 ml + 50 flocked applicators + dispensing pad)
Trial Kit - Normal Set - 2 x 100 ml tub Hydrorise Putty Normal (Base + Catalyst) + Hydrorise Regular Normal 50 ml + 6 mixing tips large/pink + hydrosystem (1 Bottle 10 ml + 50 flocked applicators + dispensing pad)
Trial Kit - Fast Set - 2 x 100 ml tub Hydrorise Putty Fast (Base + Catalyst) + Hydrorise Regular Fast 50 ml + 6 mixing tips large/pink + hydrosystem (1 Bottle 10 ml + 50 flocked applicators + dispensing pad)
• High tear strength• Excellent elastic recovery• High dimensional stability• Possibility of casting the model
immediately • Safe disinfection with Zeta 7 Solution
and Zeta 7 Spray• 3-year shelf life
ADVANTAGES
• 1:1 Mixing ratio• Final hardness: 60 Shore A• Ideal working time/setting time ratio
(snap-set effect): - Long working time; - Shorter permanence in the oral cavity• Biocompatible• Sweet mint flavour• Blue colour
CHARACTERISTICS
• Fixed prostheses• Recommeded with a wash for the
two-stage or single-stage technique in fixed prostheses
USE
A-Silicones - Impression materials
hydrorise® Maxi PuttyNormal & Fast Set
13
Technical data Normal Set Fast Set
Very heavy viscosity A-silicone.Packaged for automatic mixing machines (5:1)
ISO 4823
ADA 19
Mixing ratio Base : Catalyst
Total working time (23°C/73°F)
Time in mouth
Setting time (23°C/73°F)
Strain in compression (min - max)
Elastic recovery
Dimensional stability (after 24 h)
Hardness (Shore A)
Type 0 Putty
Consistency
5:1
2:00 min
3:30 min
5:30 min
1 - 3 %
> 99 %
< -0.20 %
60 ± 2
Type 0 Putty
Consistency
5:1
1:30 min
2:30 min
4:00 min
1 - 3 %
> 99 %
< -0.20 %
60 ± 2
• High tear strength• Excellent elastic recovery• High dimensional stability• The new Zhermack 5:1 mixing system
allows the perfect mixing without waste of material
• Possibility of casting the model immediately
• Safe disinfection with Zeta 7 Solution and Zeta 7 Spray
• 3-year shelf life
ADVANTAGES
• 5:1 Mixing ratio• Final hardness: 60 Shore A• Ideal working time/setting time ratio
(snap-set effect): - Long working time; - Shorter permanence in the oral cavity• Biocompatible• Sweet mint flavour• Blue colour
CHARACTERISTICS
• Fixed prostheses• Recommeded with a wash for the
two-stage or single-stage technique in fixed prostheses
USE
A-Silicones - Impression materials
Packaging
C207044
C207045
C207064
C207065
Hydrorise Maxi Putty Normal Set - 2 x 380 ml cartridges + 15 dynamic-static mixing tips + 2 mixing tip lockers
Hydrorise Maxi Putty Fast Set - 2 x 380 ml cartridges + 15 dynamic-static mixing tips + 2 mixing tip lockers
Hydrorise Maxi Putty Normal Set Economy Pack: 6 x 380 ml cartridges + 2 mixing tip lockers
Hydrorise Maxi Putty Fast Set Economy Pack: 6 x 380 ml cartridges + 2 mixing tip lockers
Accessories
C205530
C205540
D510010
Dynamic-static mixing tips (x50)
Mixing tip lockers (x2)
Putty cut
Equipment
Modulmix 230V
Modulmix 115V
Modulmix 230V - UK
Wall mounting kit for 1 Modulmix
Wall mounting kit for 2 Modulmix
Workstation support for 1 Modulmix
Workstation support for 2 Modulmix
Modularity kit
115V charger
230V charger
C309030
C309035
C309031
XR0240520
XR0240530
XR0240505
XR0240500
XR0240510
XR0240615N
XR0240630N
hydrorise® Heavy BodyNormal & Fast Set
14
Technical data Normal Set Fast Set
Packaging
Accessories
Heavy viscosity A-silicone
ISO 4823 - ADA 19
Mixing ratio Base : Catalyst
Total working time (23°C/73°F)
Time in mouth
Setting time (23°C/73°F)
Strain in compression (min - max)
Elastic recovery
Dimensional stability (after 24 h)
Hardness (Shore A)
C207008
C207009
C207076
C207077
C207038
C207039
Type 1 Heavy-Bodied Consistency
1:1
2:00 min
3:30 min
5:30 min
3 - 5 %
> 99.5 %
< -0.20 %
60 ± 2
Type 1 Heavy-Bodied Consistency
1:1
1:30 min
2:30 min
4:00 min
3 - 5 %
> 99.5 %
< -0.20 %
60 ± 2
Hydrorise Heavy Normal Set - 2 x 50 ml cartridges (Base + Catalyst) + 6 mixing tips medium/green
Hydrorise Heavy Fast Set - 2 x 50 ml cartridges (Base + Catalyst) + 6 mixing tips medium/green
Trial Kit - Normal Set - 1 x 50 ml cartridges Hydrorise Heavy Normal (Base + Catalyst) + 1 x 50 ml cartridges Hydrorise Light Normal (Base + Catalyst) + 6 mixing tips small/yellow + 3 mixing tips medium/green + hydrosystem (1 Bottle 10 ml + 50 flocked applicators + dispensing pad)
Trial Kit - Fast Set - 1 x 50 ml cartridges Hydrorise Heavy Fast (Base + Catalyst) + 1 x 50 ml cartridges Hydrorise Light Fast (Base + Catalyst) + 6 mixing tips small/yellow + 3 mixing tips medium/green + hydrosystem (1 Bottle 10 ml + 50 flocked applicators + dispensing pad)
Hydrorise Heavy Normal Set Economy Pack 10 x 50 ml cartridges (Base + Catalyst)
Hydrorise Heavy Fast Set Economy Pack10 x 50 ml cartridges (Base + Catalyst)
• Ideal consistency for the single stage technique with hydrorise wash material
• High tear strength• Excellent elastic recovery• High dimensional stability• Possibility of casting the model immediately • Safe disinfection with Zeta 7 Solution
and Zeta 7 Spray• 3-year shelf life
ADVANTAGES
• 1:1 Mixing ratio• Highly hydrophilic• Thixotropic• Ideal working time/setting time ratio
(snap-set effect): - Long working time; - Shorter permanence in the oral cavity• Biocompatible• Sweet mint flavour• Blue colour
CHARACTERISTICS
• Fixed prostheses• Recommended for the single-stage
technique for filling the tray in combination with Hydrorise wash
USE
A-Silicones - Impression materials
C202080
C202100
Mixing tips medium/green (x48)
D2 Dispenser -1:1
hydrorise® Maxi Heavy BodyNormal & Fast Set
15
Heavy viscosity A-silicone.Packaged for automatic mixing machines (5:1)
• Ideal consistency for the single stage technique with hydrorise wash material
• High tear strength• Excellent elastic recovery• High dimensional stability• The new Zhermack 5:1 mixing system
allows the perfect mixing without waste of material
• Possibility of casting the model immediately
• Safe disinfection with Zeta 7 Solution and Zeta 7 Spray
• 3-year shelf life
ADVANTAGES
• 5:1 Mixing ratio• Highly hydrophilic• Thixotropic• Ideal working time/setting time ratio
(snap-set effect): - Long working time; - Shorter permanence in the oral cavity• Biocompatible• Sweet mint flavour• Blue colour
CHARACTERISTICS
• Fixed prostheses• Recommended for the single-stage
technique for filling the tray in combination with Hydrorise wash
USE
A-Silicones - Impression materials
Technical data Normal Set Fast Set
ISO 4823
ADA 19
Mixing ratio Base : Catalyst
Total working time (23°C/73°F)
Time in mouth
Setting time (23°C/73°F)
Strain in compression (min - max)
Elastic recovery
Dimensional stability (after 24 h)
Hardness (Shore A)
Type 1 Heavy-Bodied
Consistency
5:1
2:00 min
3:30 min
5:30 min
3 - 5 %
> 99.5 %
< -0.20 %
60 ± 2
Type 1 Heavy-Bodied
Consistency
5:1
1:30 min
2:30 min
4:00 min
3 - 5 %
> 99.5 %
< -0.20 %
60 ± 2
Packaging
C207042
C207043
C207062
C207063
Hydrorise Maxi Heavy Normal Set - 2 x 380 ml cartridges + 15 dynamic-static mixing tips + 2 mixing tip lockers
Hydrorise Maxi Heavy Fast Set - 2 x 380 ml cartridges + 15 dynamic-static mixing tips + 2 mixing tip lockers
Hydrorise Maxi Heavy Normal Set Economy Pack 6 x 380 ml cartridges + 2 mixing tip lockers
Hydrorise Maxi Heavy Fast Set Economy Pack6 x 380 ml cartridges + 2 mixing tip lockers
Equipment
Modulmix 230V
Modulmix 115V
Modulmix 230V - UK
Wall mounting kit for 1 Modulmix
Wall mounting kit for 2 Modulmix
Workstation support for 1 Modulmix
Workstation support for 2 Modulmix
Modularity kit
115V charger
230V charger
C309030
C309035
C309031
XR0240520
XR0240530
XR0240505
XR0240500
XR0240510
XR0240615N
XR0240630N
Accessories
C205530
C205540
Dynamic-static mixing tips (x50)
Mixing tip lockers (x2)
hydrorise® MonophaseNormal & Fast Set
16
Technical data Normal Set Fast Set
Packaging Accessories
Hyper-hydrocompatible medium viscosity A-silicone
ISO 4823 - ADA 19
Mixing ratio Base : Catalyst
Total working time (23°C/73°F)
Time in mouth
Setting time (23°C/73°F)
Strain in compression (min - max)
Elastic recovery
Dimensional stability (after 24 h)
Hardness (Shore A)
C207006
C207007
C207036
C207037
Type 2 Medium-Bodied Consistency
1:1
2:00 min
3:30 min
5:30 min
3 - 5 %
> 99.5 %
< -0.20 %
54 ± 2
Type 2 Medium-Bodied Consistency
1:1
1:30 min
2:30 min
4:00 min
3 - 5 %
> 99.5 %
< -0.20 %
54 ± 2
Hydrorise Monophase Normal Set2 x 50 ml cartridges (Base + Catalyst) + 6 mixing tips large/pink
Hydrorise Monophase Fast Set2 x 50 ml cartridges (Base + Catalyst) + 6 mixing tips large/pink
Hydrorise Monophase Normal Set Economy Pack 10 x 50 ml cartridges (Base + Catalyst)
Hydrorise Monophase Fast Set Economy Pack10 x 50 ml cartridges (Base + Catalyst)
• Ideal consistency for the simultaneous technique with two viscosities
• Maximum precision in detail reproduction• High tear strength• Excellent elastic recovery• High dimensional stability• Hyperhydrophilic technology increases the
wettability of the silicone considerably improving the results of the impression
• Possibility of casting the model immediately• Safe disinfection with Zeta 7 Solution
and Zeta 7 Spray• 3-year shelf life• Thanks to its initial flowability, Hydrorise
Monophase can be used directly on preparations using Clear oral mixing tips
ADVANTAGES
• 1:1 Mixing ratio• Very similar to water (hyper-hydrocompatible)• Thixotropic• Ideal working time/setting time ratio
(snap-set effect): - Long working time; - Shorter permanence in the oral cavity• Biocompatible• Sweet mint flavour• Purple colour
CHARACTERISTICS
• Fixed prostheses• Recommended for fixed and removable
prostheses, implantology and for monophase technique with one viscosity with special tray
USE
A-Silicones - Impression materials
C205500
C202091
C202100
Mixing tips large/pink (x48)
Clear oral mixing tips (x48)
D2 Dispenser -1:1
hydrorise® Maxi MonophaseNormal & Fast Set
17
Hyper-hydrocompatible medium viscosity A-silicone. Packaged for automatic mixing machines (5:1)
• Ideal consistency for the simultaneous technique with two viscosities
• Maximum precision in detail reproduction• High tear strength• Excellent elastic recovery• High dimensional stability• Hyper-hydrophilic technology increases
the wettability of the silicone considerably improving the results of the impression
• Possibility of casting the model immediately• Safe disinfection with Zeta 7 Solution
and Zeta 7 Spray• 3-year shelf life• Thanks to its initial flowability, Hydrorise
Monophase can be used directly on preparations using an elastomer syringe
ADVANTAGES
• 5:1 Mixing ratio• Contact angle <10°• Thixotropic• Ideal working time/setting time ratio
(snap-set effect): - Long working time; - Shorter permanence in the oral cavity• Biocompatible• Sweet mint flavour• Purple colour
CHARACTERISTICS
• Fixed prostheses• Recommended for fixed and removable
prostheses, implantology and for monophase technique with one viscosity with special tray
USE
A-Silicones - Impression materials
Technical data Normal Set Fast Set
ISO 4823
ADA 19
Mixing ratio Base : Catalyst
Total working time (23°C/73°F)
Time in mouth
Setting time (23°C/73°F)
Strain in compression (min - max)
Elastic recovery
Dimensional stability (after 24 h)
Hardness (Shore A)
Type 2 Medium-
Bodied Consistency
5:1
2:00 min
3:30 min
5:30 min
3 - 5 %
> 99.5 %
< -0.20 %
54 ± 2
Type 2 Medium-
Bodied Consistency
5:1
1:30 min
2:30 min
4:00 min
3 - 5 %
> 99 %
< -0.20 %
54 ± 2
Packaging
C207040
C207041
C207060
C207061
Hydrorise Maxi Monophase Normal Set - 2 x 380 ml cartridges + 15 dynamic-static mixing tips + 2 mixing tip lockers + 1 elastomer syringe + 15 intraoral tips
Hydrorise Maxi Monophase Fast Set - 2 x 380 ml cartridges + 15 dynamic-static mixing tips + 2 mixing tip lockers + 1 elastomer syringe + 15 intraoral tips
Hydrorise Maxi Monophase Normal Set Economy Pack - 6 x 380 ml cartridges + 2 mixing tip lockers + 3 elastomer syringes + 45 intraoral tips
Hydrorise Maxi Monophase Fast Set Economy Pack - 6 x 380 ml cartridges + 2 mixing tip lockers + 3 elastomer syringes + 45 intraoral tips
Equipment
Modulmix 230V
Modulmix 115V
Modulmix 230V - UK
Wall mounting kit for 1 Modulmix
Wall mounting kit for 2 Modulmix
Workstation support for 1 Modulmix
Workstation support for 2 Modulmix
Modularity kit
115V charger
230V charger
C309030
C309035
C309031
XR0240520
XR0240530
XR0240505
XR0240500
XR0240510
XR0240615N
XR0240630N
Accessories
C205530
C205540
C207110
Dynamic-static mixing tips (x50)
Mixing tip lockers (x2)
Zhermack Syringe for elastomers
hydrorise® Regular BodyNormal & Fast Set
18
Technical data Normal Set Fast Set
Packaging
Accessories
Hyper-hydrocompatible medium viscosity A-siliconefor fixed and removable prostheses
ISO 4823 - ADA 19
Mixing ratio Base : Catalyst
Total working time (23°C/73°F)
Time in mouth
Setting time (23°C/73°F)
Strain in compression (min - max)
Elastic recovery
Dimensional stability (after 24 h)
Hardness (Shore A)
C207004
C207005
C207034
C207035
C207074
C207075
Type 2 Medium-Bodied Consistency
1:1
2:00 min
3:30 min
5:30 min
3 - 5 %
> 99.5 %
< -0.20 %
45 ± 2
Type 2 Medium-Bodied Consistency
1:1
1:30 min
2:30 min
4:00 min
3 - 5 %
> 99.5 %
< -0.20 %
45 ± 2
Hydrorise Regular Normal Set - 2 x 50 ml cartridges (Base + Catalyst) + 12 mixing tips large/pink
Hydrorise Regular Fast Set - 2 x 50 ml cartridges (Base + Catalyst) + 12 mixing tips large/pink
Hydrorise Regular Normal Set Economy Pack10 x 50 ml cartridges (Base + Catalyst)
Hydrorise Regular Fast Set Economy Pack10 x 50 ml cartridges (Base + Catalyst)
Trial Kit - Normal Set - 2 x 100 ml tubs Hydrorise Putty Normal (Base + Catalyst) + Hydrorise Regular Normal 50 ml + 6 mixing tips large/pink + hydrosystem (1 Bottle 10 ml + 50 flocked applicators + dispensing pad)
Trial Kit - Fast Set - 2 x 100 ml tubs Hydrorise Putty Fast (Base + Catalyst) + Hydrorise Regular Fast 50 ml + 6 mixing tips large/pink + hydrosystem (1 Bottle 10 ml + 50 flocked applicators + dispensing pad)
• Maximum precision in detail reproduction• High tear strength• Excellent elastic recovery• High dimensional stability• It exceeds the marked undercuts without
tearing• It does not cast from preparation• Hyper-hydrophilic technology increases
the wettability of the silicone considerably improving the results of the impression
• Possibility of casting the model immediately • Safe disinfection with Zeta 7 Solution
and Zeta 7 Spray• 3-year shelf life
ADVANTAGES
• 1:1 Mixing ratio• Very similar to water (Hyper-hydrocompatible)• Thixotropic• Ideal working time/setting time ratio
(snap-set effect): - Long working time; - Shorter permanence in the oral cavity• Biocompatible• Sweet mint flavour• Green colour
CHARACTERISTICS
• Fixed prostheses• As a wash in combination with Hydrorise Putty• Recommended for the Single-stage impression
technique or monophase with special tray
USE
A-Silicones - Impression materials
C205500
C202091
C202100
Mixing tips large/pink (x48)
Clear oral mixing tips (x48)
D2 Dispenser -1:1
hydrorise® Light BodyNormal & Fast Set
19
Technical data Normal Set Fast Set
Packaging
Accessories
Hyper-hydrocompatible low viscosity A-silicone for fixed prostheses
ISO 4823 - ADA 19
Mixing ratio Base : Catalyst
Total working time (23°C/73°F)
Time in mouth
Setting time (23°C/73°F)
Strain in compression (min - max)
Elastic recovery
Dimensional stability (after 24 h)
Hardness (Shore A)
C207000
C207001
C207070
C207071
C207076
C207077
C207030
C207031
Type 3 Light-Bodied Consistency
1:1
2:00 min
3:30 min
5:30 min
3 - 5 %
> 99.5 %
< -0.20 %
45 ± 2
Type 3 Light-Bodied Consistency
1:1
1:30 min
2:30 min
4:00 min
3 - 5 %
> 99.5 %
< -0.20 %
45 ± 2
Hydrorise Light Normal Set - 2 x 50 ml cartridges (Base + Catalyst) + 12 mixing tips small/yellow
Hydrorise Light Fast Set - 2 x 50 ml cartridges (Base + Catalyst) + 12 mixing tips small/yellow
Trial Kit - Normal Set - 2 x 100 ml tub Hydrorise Putty Normal (Base + Catalyst) + Hydrorise Light Normal 50 ml + 6 mixing tips small/yellow + hydrosystem (1 Bottle 10 ml + 50 flocked applicators + dispensing pad)
Trial Kit - Fast Set - 2 x 100 ml tub Hydrorise Putty Fast (Base + Catalyst) + Hydrorise Light Fast 50 ml + 6 mixing tips small/yellow + hydrosystem (1 Bottle 10 ml + 50 flocked applicators + dispensing pad)
Trial Kit - Normal Set - 1 x 50 ml cartridges Hydrorise Heavy Normal + 1 x 50 ml cartridges Hydrorise Light Normal + 6 mixing tips small/yellow + 3 mixing tips medium/green + hydrosystem (1 Bottle 10 ml + 50 flocked applicators + dispensing pad)
Trial Kit - Fast Set - 1 x 50 ml cartridges Hydrorise Heavy Fast + 1 x 50 ml cartridges Hydrorise Light Fast+ 6 mixing tips small/yellow + 3 mixing tips medium/green + hydrosystem (1 Bottle 10 ml + 50 flocked applicators + dispensing pad)
Hydrorise Light Normal Set Economy Pack10 x 50 ml cartridges (Base + Catalyst)
Hydrorise Light Fast Set Economy Pack10 x 50 ml cartridges (Base + Catalyst)
• Maximum precision in detail reproduction• High tear strength• Excellent elastic recovery• High dimensional stability• It exceeds the marked undercuts without tearing• It does not cast from preparation• Hyper-hydrophilic technology increases the
wettability of the silicone considerably improving the results of the impression
• Possibility of casting the model immediately • Safe disinfection with Zeta 7 Solution and Zeta 7 Spray• 3-year shelf life
ADVANTAGES
• 1:1 Mixing ratio• Very similar to water (Hyper-hydrocompatible)• Thixotropic• Ideal working time/setting time ratio
(snap-set effect): - Long working time; - Shorter permanence in the oral cavity• Biocompatible• Sweet mint flavour• Pink colour
CHARACTERISTICS
• Fixed prostheses• Recommended for the single-stage or
two-stage or impression techniques
USE
A-Silicones - Impression materials
C202070
C202090
C202100
Mixing tips small/yellow (x48)
Yellow oral tips (x48)
D2 Dispenser -1:1
hydrorise® Extra Light BodyNormal & Fast Set
20
Technical data Normal Set Fast Set
Packaging
Accessories
Hyper-hydrocompatible very low viscosity A-silicone
ISO 4823 - ADA 19
Mixing ratio Base : Catalyst
Total working time (23°C/73°F)
Time in mouth
Setting time (23°C/73°F)
Strain in compression (min - max)
Elastic recovery
Dimensional stability (after 24 h)
Hardness (Shore A)
C207002
C207003
C207072
C207073
C207032
C207033
Type 3 Light-Bodied Consistency
1:1
2:00 min
3:30 min
5:30 min
3 - 5 %
> 99.5 %
< -0.20 %
45 ± 2
Type 3 Light-Bodied Consistency
1:1
1:30 min
2:30 min
4:00 min
3 - 5 %
> 99.5 %
< -0.20 %
45 ± 2
Extra Light Normal Set - 2 x 50 ml cartridges (Base + Catalyst) + 12 mixing tips small/yellow
Extra Light Fast Set - 2 x 50 ml cartridges (Base + Catalyst) + 12 mixing tips small/yellow
Trial Kit - Normal Set - 2 x 100 ml tub Hydrorise Putty Normal (Base + Catalyst) + Hydrorise Extra Light Normal 50 ml + 6 mixing tips small/yellow + hydrosystem (1 Bottle 10 ml + 50 flocked applicators + dispensing pad)
Trial Kit - Fast Set - 2 x 100 ml tub Hydrorise Putty Fast (Base + Catalyst) + Hydrorise Extra Light Fast 50 ml + 6 mixing tips small/yellow + hydrosystem (1 Bottle 10 ml + 50 flocked applicators + dispensing pad)
Hydrorise Extra Light Normal Set Economy Pack10 x 50 ml cartridges (Base + Catalyst)
Hydrorise Extra Light Fast Set Economy Pack10 x 50 ml cartridges (Base + Catalyst)
• Maximum precision in detail reproduction• High tear strength• Excellent elastic recovery• High dimensional stability• It exceeds the marked undercuts without tearing• It does not cast from preparation• Hyper-hydrophilic technology increases
the wettability of the silicone considerably improving the results of the impression
• Possibility of casting the model immediately • Safe disinfection with Zeta 7 Solution
and Zeta 7 Spray• 3-year shelf life
ADVANTAGES
• 1:1 Mixing ratio• Very similar to water (Hyper-hydrocompatible)• Thixotropic• Ideal working time/setting time ratio
(snap-set effect): - Long working time; - Shorter permanence in the oral cavity• Biocompatible• Sweet mint flavour• Yellow colour
CHARACTERISTICS
• Fixed prostheses• Recommended for the single-stage or
two-stage or impression techniques
USE
A-Silicones - Impression materials
C202070
C202090
C202100
Mixing tips small/yellow (x48)
Yellow oral tips (x48)
D2 Dispenser -1:1
hydrosystem
21
Dispense few drops of hydrosystem in a clean dispensing pad
Gently apply to the surfaces using a microbrush (Zhermack’s Flocked applicator)
Apply air to the preparation in order to obtain an uniformlayer. Make sure there is not exceeding product inside the gingival sulcus
Apply impression material as usual, following manufacturer’s instructions
C207100 1 bottle of 10 ml + 50 flocked applicators + dispensing pad
Packaging
Pre-impression surface enhancer
• It creates an ideal surface on the preparation reducing the risks of remaking the impressions to a minimum
• It increases the wettability of the material on the surface of the teeth
• It encourages flowability of the silicone into the deepest areas of the gingival sulcus
• 3-year shelf life
ADVANTAGES
• It reduces surface tension uniformly• It improves the wettability of A-silicones• It does not create thicknesses• It further reduces the contact angle on
any surface of the impression material
CHARACTERISTICS
• Reduces surface tension prior to applying A-silicone wash impression materials e.g. Hydrorise, Colorise, elite® HD+
USE
A-Silicones
STEP 1 STEP 2 STEP 3 STEP 4
colorise® PuttyFast Set
22
ISO 4823 - ADA 19
Mixing ratio Base:Catalyst
Total working time (23°C/73°F)
Time in mouth
Setting time (23°C/73°F)
Strain in compression (min - max)
Elastic recovery
Dimensional stability (after 24 h)
Hardness (Shore A)
Type 0 Putty Consistency
1:1
1:30 min
2:30 min
4:00 min
1 - 3 %
> 99 %
< -0.20 %
60±2
Technical data
Packaging
Very high viscosity A-silicone. Putty consistency
• Resistance to deformation• Excellent elastic recovery • High dimensional stability • Possibility of casting the model
immediately after the disinfection• Safe disinfection with Zeta 7 Solution
and Zeta 7 Spray• 3-year shelf life
ADVANTAGES
• 1:1 Mixing ratio • Final hardness 60 Shore A • Ideal working time/setting time ratio
(snap-set effect): - Long working time; - Shorter permanence in the oral cavity • Biocompatible• Light blue colour• Vanilla flavour
CHARACTERISTICS
• Fixed prostheses• Recommended with a wash for the
two-stage or single-stage technique in fixed prostheses
USE
A-Silicones - Impression materials
2 x 300 ml tubs (Base + Catalyst)C205100
Accessories
D510010 Putty cut
colorise® Maxi PuttyFast SetFast Set
23
ISO 4823 - ADA 19
Mixing ratio Base:Catalyst
Total working time (23°C/73°F)
Time in mouth
Setting time (23°C/73°F)
Strain in compression (min - max)
Elastic recovery
Dimensional stability (after 24 h)
Hardness (Shore A)
C205220
C205222
Type 0 Putty Consistency
5:1
1:30 min
2:30 min
4:00 min
1 - 3 %
> 99 %
< -0.20 %
60±2
2 x 380 ml cartridges (Base + Catalyst) + 15 dynamic-static mixing tips + 2 mixing tip lockers
Economy Pack: 6 x 380 ml cartridges (Base + Catalyst) + 2 mixing tip lockers
C205530
C205540
D510010
Dynamic-static mixing tips (x50)
Mixing tip lockers (x2)
Putty cut
Technical data
Packaging Accessories
Very high viscosity A-silicone. Putty consistency. Packeged for automatic mixing machines (5:1)
• Resistance to deformation• Excellent elastic recovery • High dimensional stability • Possibility of casting the model
immediately after the disinfection• Safe disinfection with Zeta 7 Solution
and Zeta 7 Spray• 3-year shelf life
ADVANTAGES
• 5:1 Mixing ratio • Final hardness 60 Shore A • Ideal working time/setting time ratio
(snap-set effect): - Long working time; - Shorter permanence in the oral cavity • Biocompatible• Light blue colour• Vanilla flavour
CHARACTERISTICS
• Fixed prostheses• Recommended with a wash for the
two-stage or single-stage technique in fixed prostheses
USE
A-Silicones - Impression materials
Equipment
Modulmix 230V
Modulmix 115V
Modulmix 230V - UK
Wall mounting kit for 1 Modulmix
Wall mounting kit for 2 Modulmix
Workstation support for 1 Modulmix
Workstation support for 2 Modulmix
Modularity kit
115V charger
230V charger
C309030
C309035
C309031
XR0240520
XR0240530
XR0240505
XR0240500
XR0240510
XR0240615N
XR0240630N
colorise® Heavy BodyFast Set
24
ISO 4823 - ADA 19
Mixing ratio Base:Catalyst
Total working time (23°C/73°F)
Time in mouth
Setting time (23°C/73°F)
Strain in compression (min - max)
Elastic recovery
Dimensional stability (after 24 h)
Hardness (Shore A)
Type 1 Heavy-Bodied Consistency
1:1
1:30 min
2:30 min
4:00 min
3 - 5 %
> 99.5 %
< -0.20 %
60±2
Technical data
Accessories
Colour changing heavy body A-silicone
• Ideal consistency for single-stage technique with two viscosities
• Excellent elastic recovery• High dimensional stability• Chromatime Technology eliminates the
risk of permanent deformations of the impression
• Possibility of casting the model immediately after disinfection
• Safe disinfection with Zeta 7 Solution and Zeta 7 Spray
• 3-year shelf life
ADVANTAGES
• 1:1 Mixing ratio • Thermochromic: the colour change from
light blue to white indicates the end of the working time when the material is inject around the preparations; when the material it is used on the tray, the colour change indicates the end of setting time
• Thixotropic • Ideal working time/setting time ratio
(snap-set effect): - Long working time; - Shorter permanence in the oral cavity • Biocompatible • Vanilla flavour
CHARACTERISTICS
• Fixed prostheses• Recommended for the single-stage
technique for filling the tray in combination with colorise Light
USE
C202080
C202100
C205050 Mixing tips medium/green (x48)
D2 Dispenser -1:1
2 x 50 ml cartridges (Base + Catalyst)+ 6 Mixing tips medium/green
A-Silicones - Impression materials
Packaging
colorise® Maxi Heavy BodyFast Set
25
Technical data
Colour changing heavy body A-silicone. Packeged for automatic mixing machines (5:1)
ISO 4823 - ADA 19
Mixing ratio Base:Catalyst
Total working time (23°C/73°F)
Time in mouth
Setting time (23°C/73°F)
Strain in compression (min - max)
Elastic recovery
Dimensional stability (after 24 h)
Hardness (Shore A)
Type 1 Heavy-Bodied Consistency
5:1
1:30 min
2:30 min
4:00 min
3 - 5 %
> 99.5 %
< -0.20 %
60±2
• Ideal consistency for single-stage technique with two viscosities
• Excellent elastic recovery• High dimensional stability• Chromatime Technology eliminates the
risk of permanent deformations of the impression
• Possibility of casting the model immediately after disinfection
• Safe disinfection with Zeta 7 Solution and Zeta 7 Spray
• 3-year shelf life
ADVANTAGES
• 5:1 Mixing ratio • Thermochromic: the colour change from
light blue to white indicates the end of the working time when the material is inject around the preparations; when the material it is used on the tray, the colour change indicates the end of setting time
• Thixotropic • Ideal working time/setting time ratio
(snap-set effect): - Long working time; - Shorter permanence in the oral cavity • Biocompatible • Vanilla flavour
CHARACTERISTICS
• Fixed prostheses• Recommended for the single-stage
technique for filling the tray in combination with colorise Light
USE
Packaging Accessories
C205210 C205530
C205540
Dynamic-static mixing tips (x50)
Mixing tip lockers (x2)2 x 380 ml cartridges (Base + Catalyst) + 15 dynamic-static mixing tips + 2 mixing tip lockers
A-Silicones - Impression materials
Equipment
Modulmix 230V
Modulmix 115V
Modulmix 230V - UK
Wall mounting kit for 1 Modulmix
Wall mounting kit for 2 Modulmix
Workstation support for 1 Modulmix
Workstation support for 2 Modulmix
Modularity kit
115V charger
230V charger
C309030
C309035
C309031
XR0240520
XR0240530
XR0240505
XR0240500
XR0240510
XR0240615N
XR0240630N
colorise® MonophaseFast Set
26
ISO 4823 - ADA 19
Mixing ratio Base:Catalyst
Total working time (23°C/73°F)
Time in mouth
Setting time (23°C/73°F)
Strain in compression (min - max)
Elastic recovery
Dimensional stability (after 24 h)
Hardness (Shore A)
C205040
Type 2 Medium-Bodied Consistency
1:1
1:30 min
2:30 min
4:00 min
3 - 5 %
> 99.5 %
< -0.20 %
54±2
2 x 50 ml cartridges (Base + Catalyst)+ 6 mixing tips large/pink
C205500
C202091
C202100
Mixing tips large/pink (x48)
Clear oral mixing tips (x48)
D2 Dispenser -1:1
Technical data
Packaging Accessories
Colour changing and hydrophilic medium body A-silicone
• Ideal consistency for monophase technique• Maximum precision in detail reproduction• High tear strength• Excellent elastic recovery• High dimensional stability• Chromatime Technology eliminates the
risk of permanent deformations of the impression
• Possibility of casting the model immediately after disinfection
• Safe disinfection with Zeta 7 Solution and Zeta 7 Spray
• 3-year shelf life
ADVANTAGES
• 1:1 Mixing ratio • Thermochromic: the colour change from
light blue to white indicates the end of the working time when the material is inject around the preparations; when the material is used on the tray, the colour change indicates the end of setting time
• Highly hydrophilic • Thixotropic • Ideal working time/setting time ratio (snap-
set effect): - Long working time; - Shorter permanence in the oral cavity • Biocompatible • Vanilla flavour
CHARACTERISTICS
• Fixed prostheses• Recommended for monophase technique
with one viscosity with individual tray
USE
A-Silicones - Impression materials
colorise® Maxi MonophaseFast Set
27
ISO 4823 - ADA 19
Mixing ratio Base:Catalyst
Total working time (23°C/73°F)
Time in mouth
Setting time (23°C/73°F)
Strain in compression (min - max)
Elastic recovery
Dimensional stability (after 24 h)
Hardness (Shore A)
Type 2 Medium-Bodied Consistency
5:1
1:30 min
2:30 min
4:00 min
3 - 5 %
> 99.5 %
< -0.20 %
54±2
C205530
C205540
C207110
Dynamic-static mixing tips (x50)
Mixing tip lockers (x2)
Zhermack Syringe for elastomers
Technical data
Packaging Accessories
Colour changing and hydrophilic medium body A-silicone. Packeged for automatic mixing machines (5:1)
• Ideal consistency for monophase technique• Maximum precision in detail reproduction• High tear strength• Excellent elastic recovery• High dimensional stability• Chromatime Technology eliminates the
risk of permanent deformations of the impression
• Possibility of casting the model immediately after disinfection
• Safe disinfection with Zeta 7 Solution and Zeta 7 Spray
• 3-year shelf life
ADVANTAGES
• 5:1 Mixing ratio • Thermochromic: the colour change from
light blue to white indicates the end of the working time when the material is inject around the preparations; when the material is used on the tray, the colour change indicates the end of setting time
• Highly hydrophilic • Thixotropic • Ideal working time/setting time ratio
(snap-set effect): -Long working time; -Shorter permanence in the oral cavity • Biocompatible • Vanilla flavour
CHARACTERISTICS
• Fixed prostheses• Recommended for monophase technique
with one viscosity with individual tray
USE
A-Silicones - Impression materials
Equipment
Modulmix 230V
Modulmix 115V
Modulmix 230V - UK
Wall mounting kit for 1 Modulmix
Wall mounting kit for 2 Modulmix
Workstation support for 1 Modulmix
Workstation support for 2 Modulmix
Modularity kit
115V charger
230V charger
C309030
C309035
C309031
XR0240520
XR0240530
XR0240505
XR0240500
XR0240510
XR0240615N
XR0240630N
2 x 380 ml cartridges (Base + Catalyst) + 15 dynamic-static mixing tips + 2 mixing tip lockers + 1 elastomer syringe + 15 oral tips
C205200
colorise® Regular BodyFast Set
28
ISO 4823 - ADA 19
Mixing ratio Base:Catalyst
Total working time (23°C/73°F)
Time in mouth
Setting time (23°C/73°F)
Strain in compression (min - max)
Elastic recovery
Dimensional stability (after 24 h)
Hardness (Shore A)
Type 2 Medium-Bodied Consistency
1:1
1:30 min
2:30 min
4:00 min
3 - 5 %
> 99.5 %
< -0.20 %
45±2
C205500
C202091
C202100
C205030 Mixing tips large/pink (x48)
Clear oral mixing tips (x48)
D2 Dispenser -1:1
2 x 50 ml cartridges (Base + Catalyst)+ 12 mixing tips large/pink
Technical data
Packaging Accessories
Colour changing and hydrophilic medium body A-silicone wash
A-Silicones - Impression materials
• Maximum precision in detail reproduction• High tear strength• Excellent elastic recovery• High dimensional stability• Chromatime Technology eliminates the
risk of permanent deformations of the impression
• Possibility of casting the model immediately after disinfection
• Safe disinfection with Zeta 7 Solution and Zeta 7 Spray
• 3-year shelf life
ADVANTAGES
• 1:1 Mixing ratio • Thermochromic: the colour change from
green to yellow indicates the end of the working time in the mouth
• Highly hydrophilic • Thixotropic • Ideal working time/setting time ratio
(snap-set effect): - Long working time; - Shorter permanence in the oral cavity • Biocompatible • Vanilla flavour
CHARACTERISTICS
• Fixed prostheses• Recommended for the single-stage
impression technique or monophase with indivudual tray
USE
colorise® Light BodyFast Set
29
ISO 4823 - ADA 19
Mixing ratio Base:Catalyst
Total working time (23°C/73°F)
Time in mouth
Setting time (23°C/73°F)
Strain in compression (min - max)
Elastic recovery
Dimensional stability (after 24 h)
Hardness (Shore A)
Type 3 Light-Bodied Consistency
1:1
1:30 min
2:30 min
4:00 min
3 - 5 %
> 99.5 %
< -0.20 %
45±2
C202070C202090C202100
C205000 Mixing tips small/yellow (x48)
Yellow oral tips (x48)
D2 Dispenser -1:1
2 x 50 ml cartridges (Base + Catalyst)+ 12 mixing tips small/yellow
Technical data
Packaging Accessories
A-Silicones - Impression materials
Colour changing and hydrophilic light body A-silicone wash
• Maximum precision in detail reproduction• High tear strength• Excellent elastic recovery• High dimensional stability• Chromatime Technology eliminates the
risk of permanent deformations of the impression
• Possibility of casting the model immediately after disinfection
• Safe disinfection with Zeta 7 Solution and Zeta 7 Spray
• 3-year shelf life
ADVANTAGES
• 1:1 Mixing ratio • Thermochromic: the colour change from
green to yellow indicates the end of the working time in the mouth
• Highly hydrophilic • Thixotropic • Ideal working time/setting time ratio
(snap-set effect): - Long working time; - Shorter permanence in the oral cavity • Biocompatible • Vanilla flavour
CHARACTERISTICS
• Fixed prostheses• Recommended for the two-stage or
single-stage impression technique
USE
colorise® Extra Light BodyFast Set
30
ISO 4823 - ADA 19
Mixing ratio Base:Catalyst
Total working time (23°C/73°F)
Time in mouth
Setting time (23°C/73°F)
Strain in compression (min - max)
Elastic recovery
Dimensional stability (after 24 h)
Hardness (Shore A)
Type 3 Light-Bodied Consistency
1:1
1:30 min
2:30 min
4:00 min
3 - 5 %
> 99.5 %
< -0.20 %
45±2
C202070
C202090
C202100
C205020 Mixing tips small/yellow (x48)
Yellow oral tips (x48)
D2 Dispenser -1:1
2 x 50 ml cartridges (Base + Catalyst)+ 12 mixing tips small/yellow
Technical data
Packaging Accessories
Colour changing and hydrophilic extra light body A-silicone wash
• Maximum precision in detail reproduction• High tear strength• Excellent elastic recovery• High dimensional stability• Chromatime Technology eliminates the
risk of permanent deformations of the impression
• Possibility of casting the model immediately after disinfection
• Safe disinfection with Zeta 7 Solution and Zeta 7 Spray
• 3-year shelf life
ADVANTAGES
• 1:1 Mixing ratio • Thermochromic: the colour change from
green to yellow indicates the end of the working time in the mouth
• Highly hydrophilic • Great flowability • Ideal working time/setting time ratio
(snap-set effect): - Long working time; - Shorter permanence in the oral cavity • Biocompatible • Vanilla flavour
CHARACTERISTICS
• Fixed prostheses• Recommended for the two-stage or
single-stage impression technique
USE
A-Silicones - Impression materials
colorise® Rigid Heavy Body Fast Set
31
A-Silicones - Impression materials
• Imperceptible consistency does not interfere with patient’s normal occlusion
• Excellent elastic recovery • High dimensional stability • Chromatime technology eliminates the
risk of permanent deformations of the impression
• Possibility of casting the model immediately after disinfection
• Safe disinfection with Zeta 7 Solution and Zeta 7 Spray
• 3-year shelf life
ADVANTAGES
• 1:1 Mixing ratio • Thermochromic: chromatic change from
blue to white indicates completion of setting
• Thixotropic • Easily extruded into impression tray • Ideal working time/setting time ratio
(snap-set effect): - Long working time - Shorter permanence in the oral cavity• Biocompatible • Blue in colour at room temperature • Vanilla flavour
CHARACTERISTICS
• Impressions for fixed prostheses • Recommended with the single-stage
impression technique with a dual arch (simultaneous) impression tray and used in combination with Colorise Light (wash)
USE
Fast Setting, heavy bodied thermochromic A-Silicone with a rigid set
ISO 4823 - ADA 19
Mixing ratio Base:Catalyst
Total working time (23°C/73°F)
Time in mouth
Setting time (23°C/73°F)
Strain in compression (min - max)
Elastic recovery
Dimensional stability (after 24 h)
Hardness (Shore A)
Type 1 Heavy-Bodied Consistency
1:1
1:00 min
2:00 min
3:00 min
3 - 5 %
> 99.5 %
> -0.20 %
75
Technical data
Packaging
C205060 2 x 50 ml cartridges (Base + Catalyst)+ 6 mixing tips medium/green
C205920
C202080
C202100
D5DANT
D5DFUL
D5DPLE
D5DPOS
D5DQUA
Colorise dual arch Intro Kit
Mixing tips medium/green (x48)
D2 dispenser - 1:1
hi-tray light dual arch Anterior (x30)
hi-tray light dual arch Full Arch (x30)
hi-tray light dual arch Posterior sideless (x48)
hi-tray light dual arch Posterior (x48)
hi-tray light dual arch Quadrant (x40)
Accessories
colorise® dual arch
32
Dual arch (triple tray) impression system: thermochromic A-Silicone in Light body and Rigid heavy body viscosities with a dual arch hi-tray Light impression tray
• Colorise thermochromic A-silicone - Colorise Rigid - heavy body 2 x 50 ml - Colorise Light - light body 1 x 50 ml - Mixing tips medium/green (x6) - Mixing tips small/yellow (x6) - Intra-oral tips (x6)
• Dual arch hi-tray light impression tray: - Anterior (x1) - Full Arch (x1) - Quadrant (x1) - Posterior (x1) - Posterior sideless (x1)
• Instruction manual
PACKAGING
• Fixed prostheses impressions• Recommended for the single-stage
dual arch technique (simultaneous impressions)
USE
A-Silicones - Impression materials
Technical data Colorise Rigid Colorise Light
ISO 4823 - ADA 19
Mixing ratio Base:Catalyst
Total working time (23°C/73°F)
Time in mouth
Setting time (23°C/73°F)
Strain in compression (min - max)
Elastic recovery
Dimensional stability (after 24 h)
Hardness (Shore A)
Type 1 Heavy-Bodied Consistency
1:1
1:00 min
2:00 min
3:00 min
3 - 5 %
> 99.5 %
> -0.20 %
75
Type 3 Light-Bodied Consistency
1:1
1:30 min
2:30 min
4:00 min
3 - 5 %
> 99.5 %
> -0.20 %
45
C205060
C205000
C202080
C202070
C202090
C202100
D5DANT
D5DFUL
D5DPLE
D5DPOS
D5DQUA
Packaging
C205920 Colorise dual arch Intro Kit
Colorise Rigid - 2 x 50 ml cartridges (Base + Catalyst) + 6 mixing tips medium/green
Colorise Light - 2 x 50 ml cartridges (Base+Catalyst) + 12 mixing tips small/yellow
Mixing tips medium/green (x48)
Mixing tips small/yellow (x48)
Oral mixing tips small/yellow (x48)
D2 dispenser - 1:1
hi-tray Light dual arch Anterior (x30)
hi-tray Light dual arch Full Arch (x30)
hi-tray Light dual arch Posterior sideless (x48)
hi-tray Light dual arch Posterior (x48)
hi-tray Light dual arch Quadrant (x40)
Accessories
notes
freealgin®
Fast Set
34
ISO 4823 - ADA 19
Mixing ratio Base:Catalyst
Total working time (23°C/73°F)
Time in mouth
Setting time (23°C/73°F)
Strain in compression (min - max)
Elastic recovery
Dimensional stability (after 24 h)
Hardness (Shore A)
C300110
C300112
Type 2 Medium-Bodied Consistency
1:1
1:00 min
1:30 min
2:30 min
3 - 5 %
> 99.5 %
< -0.20 %
40
2 x 50 ml cartridges (Base + Catalyst)+ 4 mixing tips extra-large/lilac
Economy pack24 x 50 ml cartridges (Base + Catalyst)
C205501
C202100
Mixing tips extra-large/lilac (x48)
D2 Dispenser -1:1
Technical data
Packaging Accessories
Medium viscosity alginate alternative, for all alginate indications
• Ideal consistency for creating temporary crowns and bridge impressions, and then used with Zhermack’s Acrytemp temporary material
• Excellent elastic recovery, fast setting for orthodontics
• High tear resistance • High dimensional stability, no time limit for
applying adhesive to the impression • Excellent results even in humid field thanks to a
high hydrophilic behaviour• Possibile to obtain several models from the same
impression • Possible to pour the model immediately after
disinfection • Safe disinfection with Zeta 7 Solution
and Zeta 7 Spray • 3 year shelf life
ADVANTAGES
• Fast setting • 1:1 Mixing ratio • Highly Hydrophilic • Thixotropic • Ideal balance between working time and setting
time (snap-set effect): - Long working time; - Shorter permanence in the oral cavity • Biocompatibility • Lilac colour • Exotic fruity flavour (mangustan)
CHARACTERISTICS
• Impressions for temporary crowns and bridges directly in the surgery
• Impressions for orthodontics • For removable prostheses or for modifying a
removable prostheses• Suitable for preliminary impressions, for
antagonist models and surgery impressions• For bites, surgical guides and masks for whitening
solutions • Recommended for Monophase technique with
one viscosity
USE
A-Silicones - Impression materials
freealgin® MaxiFast Set
35
ISO 4823 - ADA 19
Mixing ratio Base:Catalyst
Total working time (23°C/73°F)
Time in mouth
Setting time (23°C/73°F)
Strain in compression (min - max)
Elastic recovery
Dimensional stability (after 24 h)
Hardness (Shore A)
C300100
C300102
Type 2 Medium-Bodied Consistency
5:1
1:00 min
1:30 min
2:30 min
3 - 5 %
> 99.5 %
< -0.20 %
40
2 x 380 ml cartridges + 15 dynamic-static mixing tips + 2 mixing tip lockers
Economy Pack: 6 x 380 ml cartridges + 2 mixing tip lockers
C205530
C205540
Dynamic-static mixing tips (x50)
Mixing tip lockers (x2)
Technical data
Packaging Accessories
Medium viscosity alginate alternative, for all alginate indications.Packaged for automatic mixing machines (5:1)
• Ideal consistency for creating temporary crowns and bridge impressions, and then used with Zhermack’s Acrytemp temporary material
• Excellent elastic recovery, fast setting for orthodontics
• High tear resistance • High dimensional stability, no time limit for
applying adhesive to the impression • Excellent results even in humid field thanks to a
high hydrophilic behaviour• Possibile to obtain several models from the same
impression • Possible to pour the model immediately after
disinfection • Safe disinfection with Zeta 7 Solution and Zeta 7 Spray• 3 year shelf life
ADVANTAGES
• Fast setting • 5:1 Mixing ratio • Highly Hydrophilic • Thixotropic • Ideal balance between working time and setting time
(snap-set effect): - Long working time; - Shorter permanence in the oral cavity • Biocompatibility • Lilac colour • Exotic fruity flavour (mangustan)
CHARACTERISTICS
• Impressions for temporary crowns and bridges directly in the surgery
• Impressions for orthodontics • For removable prostheses or for modifying a
removable prostheses• Suitable for preliminary impressions, for
antagonist models and surgery impressions• For bites, surgical guides and masks for whitening
solutions • Recommended for Monophase technique with
one viscosity
USE
A-Silicones - Impression materials
Equipment
Modulmix 230V
Modulmix 115V
Modulmix 230V - UK
Wall mounting kit for 1 Modulmix
Wall mounting kit for 2 Modulmix
Workstation support for 1 Modulmix
Workstation support for 2 Modulmix
Modularity kit
115V charger
230V charger
C309030
C309035
C309031
XR0240520
XR0240530
XR0240505
XR0240500
XR0240510
XR0240615N
XR0240630N
elite® HD+ Putty SoftNormal Set
36
Very high viscosity A-silicone
• High deformation strength• Excellent elastic recovery • High dimensional stability • Safe disinfection with Zeta 7 Solution
and Zeta 7 Spray• 3-year shelf life
ADVANTAGES
• Final hardness: 60 Shore A • Ideal working time/setting time ratio (snap-set effect): - Long working time; - Shorter permanence in the oral cavity• Biocompatible • Orange colour
CHARACTERISTICS
• Fixed prostheses• Suggested technique: two-stage with
standard tray
USE
A-Silicones - Impression materials
Technical data
ISO 4823 - ADA 19
Total working time (23°C/73°F)
Time in mouth
Setting time (23°C/73°F)
Elastic recovery
Dimensional stability (after 24 h)
Hardness (Shore A)
Type 0 Putty Consistency
2:00 min
3:30 min
5:30 min
> 99.5 %
< -0.20 %
60
Packaging
2 x 250 ml tubs (Base + Catalyst)
Economy pack: 4 x 450 ml tubs (Base + Catalyst)
elite® HD+ Intro kit Normal Set: 2 x 250 ml tubs Putty Soft Normal (Base + Catalyst) + 1 x 50 ml cartridges Light Normal + 1 x 50 ml cartridges Regular Normal+ 1 Dispenser D2 + 12 mixing tips small/yellow + 6 yellow oral tips
C203000
C203002
C203100
Accessories
D510010 Putty cut
elite® HD+ Mini Trial kit - Normal Set: 2 x 100 ml tubs Putty Normal (Base + Catalyst) + 1 x 50 ml cartridges Light Normal + 4 mixing tips small/yellow + 4 yellow oral tips
C203134
elite® HD+ Maxi Putty SoftNormal Set
37
Very high viscosity A-silicone for automatic mixing machines (5:1)
• High deformation strength• Excellent elastic recovery • High dimensional stability • Safe disinfection with Zeta 7 Solution
and Zeta 7 Spray• 3-year shelf life
ADVANTAGES
• 5:1 Mixing ratio • Final hardness 60 Shore A • Ideal working time/setting time ratio (snap-set effect): - Long working time; - Shorter permanence in the oral cavity• Biocompatible • Orange colour
CHARACTERISTICS
• Fixed prostheses• Suggested technique: two-stage with
standard tray
USE
A-Silicones - Impression materials
Technical data
ISO 4823 - ADA 19
Total working time (23°C/73°F)
Time in mouth
Setting time (23°C/73°F)
Elastic recovery
Dimensional stability (after 24 h)
Hardness (Shore A)
Type 0 Putty Consistency
2:00 min
3:30 min
5:30 min
> 99.5 %
< -0.20 %
60
Packaging Accessories
C202340
C202350
2 x 380 ml cartridges (Base + Catalyst) + 2 mixing tip lockers + 15 dynamic-static mixing tips
Economy Pack: 6 x 380 ml cartridges (Base + Catalyst) + 2 mixing tip lockers
C205530
C205540
D510010
Dynamic-static mixing tips (x50)
Mixing tip lockers (x2)
Putty cut
Equipment
Modulmix 230V
Modulmix 115V
Modulmix 230V - UK
Wall mounting kit for 1 Modulmix
Wall mounting kit for 2 Modulmix
Workstation support for 1 Modulmix
Workstation support for 2 Modulmix
Modularity kit
115V charger
230V charger
C309030
C309035
C309031
XR0240520
XR0240530
XR0240505
XR0240500
XR0240510
XR0240615N
XR0240630N
elite® HD+ Putty SoftFast Set
38
Technical data
Very high viscosity A-silicone
ISO 4823 - ADA 19
Total working time (23°C/73°F)
Time in mouth
Setting time (23°C/73°F)
Elastic recovery
Dimensional stability (after 24 h)
Hardness (Shore A)
Type 0 Putty Consistency
1:30 min
2:30 min
4:00 min
> 99.5 %
< -0.20 %
60
• High deformation strength• Excellent elastic recovery • High dimensional stability • Safe disinfection with Zeta 7 Solution
and Zeta 7 Spray• 3-year shelf life
ADVANTAGES
• Final hardness 60 Shore A • Ideal working time/setting time ratio (snap-set effect): - Long working time; - Shorter permanence in the oral cavity• Biocompatible• Yellow colour
CHARACTERISTICS
• Fixed prostheses• Suggested technique: two-stage with
standard tray
USE
A-Silicones - Impression materials
Accessories
D510010 Putty cut
Packaging
2 x 250 ml tubs (Base + Catalyst)
Economy pack: 4 x 450 ml tubs (Base + Catalyst)
elite® HD+ Intro kit - Fast Set: 2 x 250 ml tubs Putty Soft Fast (Base + Catalyst) + 1 x 50 ml cartridges Light Fast + 1 x 50 ml cartridges Regular Fast+ 1 Dispenser D2 + 12 mixing tips small/yellow + 6 yellow oral tips
C203010
C203012
C203120
elite® HD+ Mini Trial kit - Fast Set:2 x 100 ml tubs Putty Fast Fast (Base + Catalyst) + 1 x 50 ml cartridges Light Fast + 4 mixing tips small/yellow + 4 yellow oral tips
C203131
elite® HD+ Maxi Putty SoftFast Set
39
Packaging Accessories
Very high viscosity A-silicone for automatic mixing machines (5:1)
C202360
C202370
2 x 380 ml cartridges (Base + Catalyst) + 2 mixing tip lockers + 15 dynamic-static mixing tips
Economy Pack: 6 x 380 ml cartridges (Base + Catalyst) + 2 mixing tip lockers
C205530
C205540
D510010
Dynamic-static mixing tips (x50)
Mixing tip lockers (x2)
Putty cut
• High deformation strength• Excellent elastic recovery • High dimensional stability • Safe disinfection with Zeta 7 Solution
and Zeta 7 Spray• 3-year shelf life
ADVANTAGES
• 5:1 Mixing ratio • Final hardness 60 Shore A • Ideal working time/setting time ratio (snap-set effect): - Long working time; - Shorter permanence in the oral cavity• Biocompatible • Yellow colour
CHARACTERISTICS
• Fixed prostheses• Suggested technique: two-stage with
standard tray
USE
A-Silicones - Impression materials
Technical data
ISO 4823 - ADA 19
Total working time (23°C/73°F)
Time in mouth
Setting time (23°C/73°F)
Elastic recovery
Dimensional stability (after 24 h)
Hardness (Shore A)
Type 0 Putty Consistency
1:30 min
2:30 min
4:00 min
> 99 %
< -0.20 %
60
Equipment
Modulmix 230V
Modulmix 115V
Modulmix 230V - UK
Wall mounting kit for 1 Modulmix
Wall mounting kit for 2 Modulmix
Workstation support for 1 Modulmix
Workstation support for 2 Modulmix
Modularity kit
115V charger
230V charger
C309030
C309035
C309031
XR0240520
XR0240530
XR0240505
XR0240500
XR0240510
XR0240615N
XR0240630N
elite® HD+ Tray MaterialFast Set
40
C202032
C202062
2 x 50 ml cartridges (Base + Catalyst) + 6 mixing tips medium/green
Economy Pack: 20 x 50 ml cartridges (Base + Catalyst)
C202080
C202100
Mixing tips medium/green (x48)
D2 Dispenser -1:1
Technical data
Packaging Accessories
High viscosity A-silicone. Heavy consistency
ISO 4823 - ADA 19
Total working time (23°C/73°F)
Time in mouth
Setting time (23°C/73°F)
Elastic recovery
Dimensional stability (after 24 h)
Hardness (Shore A)
Type 1 Heavy-Bodied Consistency
1:30 min
2:30 min
4:00 min
> 99.5 %
< -0.20 %
60
• Ideal consistency for single-stage technique with two viscosities
• High dimensional stability • Excellent elastic recovery• Opaque pigments for improved detail
reading• Possibility of casting the model
immediately after disinfection• Safe disinfection with Zeta 7 Solution
and Zeta 7 Spray• 3-year shelf life
ADVANTAGES
• 1:1 Mixing ratio • Thixotropic • Ideal working time/setting time ratio
(snap-set effect): - Long working time; - Shorter permanence in the oral cavity• Biocompatible • Orange colour
CHARACTERISTICS
• Single-stage technique with two viscosities
• Suggested indications: elite® HD+ Tray Material on the tray and elite® HD+ Light Fast directly on the preparations
USE
A-Silicones - Impression materials
elite® HD+ Maxi Tray MaterialFast Set
41
Technical data
Packaging
High viscosity A-silicone for automatic mixing machines. Heavy consistency
ISO 4823 - ADA 19
Total working time (23°C/73°F)
Time in mouth
Setting time (23°C/73°F)
Elastic recovery
Dimensional stability (after 24 h)
Hardness (Shore A)
C202320
C202330
Type 1 Heavy-Bodied Consistency
1:30 min
2:30 min
4:00 min
> 99.5 %
< -0.20 %
60
2 x 380 ml cartridges (Base + Catalyst) + 2 mixing tip lockers + 15 dynamic-static mixing tips
Economy Pack: 6 x 380 ml cartridges (Base + Catalyst) + 2 mixing tip lockers
• Ideal consistency for single-stage technique with two viscosities
• High dimensional stability • Excellent elastic recovery• Opaque pigments for improved detail
reading • Possibility of casting the model
immediately after disinfection • Safe disinfection with Zeta 7 Solution
and Zeta 7 Spray• 3-year shelf life
ADVANTAGES
• 5:1 Mixing ratio • Thixotropic • Ideal working time/setting time ratio
(snap-set effect): - Long working time; - Shorter permanence in the oral cavity • Biocompatible • Orange colour
CHARACTERISTICS
• Single-stage technique with two viscosities
• Suggested indications: elite® HD+ Tray Material on the tray and elite® HD+ Light Normal directly on the preparations
USE
A-Silicones - Impression materials
C205530
C205540
Dynamic-static mixing tips (x50)
Mixing tip lockers (x2)
Accessories
Equipment
Modulmix 230V
Modulmix 115V
Modulmix 230V - UK
Wall mounting kit for 1 Modulmix
Wall mounting kit for 2 Modulmix
Workstation support for 1 Modulmix
Workstation support for 2 Modulmix
Modularity kit
115V charger
230V charger
C309030
C309035
C309031
XR0240520
XR0240530
XR0240505
XR0240500
XR0240510
XR0240615N
XR0240630N
elite® HD+ MonophaseNormal Set
42
Technical data
Packaging Accessories
Hydrophilic medium viscosity A-silicone. Medium consistency
ISO 4823 - ADA 19
Total working time (23°C/73°F)
Time in mouth
Setting time (23°C/73°F)
Elastic recovery
Dimensional stability (after 24 h)
Hardness (Shore A)
C202020
Type 2 Medium-Bodied Consistency
2:00 min
3:30 min
5:30 min
> 99.5 %
< -0.20 %
60
C202070
C202090
C202100
Mixing tips small/yellow (x48)
Yellow oral tips (x48)
D2 Dispenser -1:1
• Ideal consistency for monophase technique
• Maximum precision in detail reproduction • High tear strength• Excellent elastic recovery• High dimensional stability• Opaque pigments for improved detail
reading • Possibility of casting the model
immediately after disinfection• Safe disinfection with Zeta 7 Solution
and Zeta 7 Spray• 3-year shelf life
ADVANTAGES
• 1:1 Mixing ratio • Hydrophilic• Thixotropic • Ideal working time/setting time ratio
(snap-set effect): - Long working time; - Shorter permanence in the oral cavity• Biocompatible• Yellow colour
CHARACTERISTICS
• Monophase technique with one viscosity • Suggested indications: one-component
material to be used simultaneously both on the tray and around the preparations
USE
A-Silicones - Impression materials
2 x 50 ml cartridges (Base + Catalyst) + 12 mixing tips small/yellow
elite® HD+ Maxi MonophaseNormal Set
43
Technical data
Packaging
ISO 4823 - ADA 19
Total working time (23°C/73°F)
Time in mouth
Setting time (23°C/73°F)
Elastic recovery
Dimensional stability (after 24 h)
Hardness (Shore A)
C202300
C202310
Type 2 Medium-Bodied Consistency
2:00 min
3:30 min
5:30 min
> 99.5 %
< -0.20 %
60
2 x 380 ml cartridges + 15 dynamic-static mixing tips + 2 mixing tip lockers + 1 Syringe for elastomers + 15 Intraoral mixing tips
Economy Pack - 6 x 380 ml cartridges + 2 mixing tip lockers + 3 Syringe for elastomers + 45 Intraoral mixing tips
Hydrophilic medium viscosity A-silicone for automatic mixing machines. Medium consistency 5:1
• Ideal consistency for monophase technique
• Maximum precision in detail reproduction• High tear strength• Excellent elastic recovery• High dimensional stability• Opaque pigments for improved detail
reading • Possibility of casting the model
immediately after disinfection• Safe disinfection with Zeta 7 Solution
and Zeta 7 Spray• 3-year shelf life
ADVANTAGES
• 5:1 Mixing ratio • Hydrophilic• Thixotropic • Ideal working time/setting time ratio
(snap-set effect): - Long working time; - Shorter permanence in the oral cavity • Biocompatible • Yellow colour
CHARACTERISTICS
• Monophase technique with one viscosity • Suggested indications: one-component
material to be used simultaneously both on the tray and around the preparations
USE
A-Silicones - Impression materials
C205530
C205540
C207110
Dynamic-static mixing tips (x50)
Mixing tip lockers (x2)
Zhermack Syringe for elastomers
Accessories
Equipment
Modulmix 230V
Modulmix 115V
Modulmix 230V - UK
Wall mounting kit for 1 Modulmix
Wall mounting kit for 2 Modulmix
Workstation support for 1 Modulmix
Workstation support for 2 Modulmix
Modularity kit
115V charger
230V charger
C309030
C309035
C309031
XR0240520
XR0240530
XR0240505
XR0240500
XR0240510
XR0240615N
XR0240630N
elite® HD+ Regular BodyNormal Set
44
Technical data
Hydrophilic medium viscosity A-silicone. Medium consistency
ISO 4823 - ADA 19
Total working time (23°C/73°F)
Time in mouth
Setting time (23°C/73°F)
Elastic recovery
Dimensional stability (after 24 h)
Hardness (Shore A)
Type 2 Medium-Bodied Consistency
2:00 min
3:30 min
5:30 min
> 99.5 %
< -0.20 %
45
• Maximum precision in detail reproduction • High tear strength• Excellent elastic recovery • High dimensional stability • Opaque pigments for improved detail
reading • Possibility of casting the model
immediately after disinfection• Safe disinfection with Zeta 7 Solution
and Zeta 7 Spray• 3-year shelf life
ADVANTAGES
• 1:1 Mixing ratio • Hydrophilic• Thixotropic • Ideal working time/setting time ratio
(snap-set effect): - Long working time; - Shorter permanence in the oral cavity • Biocompatible• Purple colour
CHARACTERISTICS
• Fixed prostheses• Removable complete or partial prostheses• Suggested technique: single-stage
technique with special tray
USE
A-Silicones - Impression materials
Packaging Accessories
C202070
C202090
C202100
C207200
C207202
Mixing tips small/yellow (x48)
Yellow oral tips (x48)
D2 Dispenser -1:1
Spatula for silicones
Mixing pad (12 sheets)
C203020
C203025
C203144
2 x 50 ml cartridges (Base + Catalyst) + 12 mixing tips small/yellow
2 x 90 ml tubes (Base + Catalyst)
Economy Pack: 10 x 50 ml cartridges
elite® HD+ Light BodyNormal Set
45
Technical data Reference
Hydrophilic low viscosity A-silicone. Light consistency
ISO 4823 - ADA 19
Total working time (23°C/73°F)
Time in mouth
Setting time (23°C/73°F)
Elastic recovery
Dimensional stability (after 24 h)
Hardness (Shore A)
Type 3 Light-Bodied Consistency
2:00 min
3:30 min
5:30 min
> 99.5 %
< -0.20 %
45
• Maximum precision in detail reproduction • High tear strength• Excellent elastic recovery • High dimensional stability • Opaque pigments for improved detail
reading • Possibility of casting the model
immediately after disinfection• Safe disinfection with Zeta 7 Solution
and Zeta 7 Spray• 3-year shelf life
ADVANTAGES
• 1:1 Mixing ratio • Hydrophilic• Thixotropic • Ideal working time/setting time ratio
(snap-set effect): - Long working time; - Shorter permanence in the oral cavity • Biocompatible • Light blue colour
CHARACTERISTICS
• Fixed prostheses• Suggested techniques: two-stage
or single-stage technique with two viscosities with elite® HD+ Tray Material or elite® HD+ Maxi Tray Material
USE
Cross-Over Clinical Study: Poliether and
Vinylpolysiloxanes for Precision
Impressions. M. Caldari, P. Baldissara, R. Scotti.
University of Bologna.
A-Silicones - Impression materials
Packaging Accessories
C202070
C202090
C202100
C207200
C207202
Mixing tips small/yellow (x48)
Yellow oral tips (x48)
D2 Dispenser -1:1
Spatula for silicones
Mixing pad (12 sheets)
2 x 50 ml cartridges (Base + Catalyst) + 12 mixing tips small/yellow
2 x 90 ml tubs (Base + Catalyst)
Economy Pack: 10 x 50 ml cartridges
elite® HD+ Intro kit - Normal Set: 2 x 250 ml tubs Putty Soft Normal (Base + Catalyst) + 1 x 50 ml cartridges Light Normal + 1 x 50 ml cartridges Regular Normal + 1 Dispenser D2 + 12 mixing tips small/yellow + 6 yellow oral tips
elite® HD+ Mini Trial kit - Normal Set: 2 x 100 ml tubs Putty Normal (Base + Catalyst)+ 1 x 50 ml cartridges Light Normal + 4 mixing tips small/yellow + 4 yellow oral tips
C203030
C203035
C203140
C203100
C203134
elite® HD+ Light BodyFast Set
46
ISO 4823 - ADA 19
Total working time (23°C/73°F)
Time in mouth
Setting time (23°C/73°F)
Elastic recovery
Dimensional stability (after 24 h)
Hardness (Shore A)
Type 3 Light-Bodied Consistency
1:30 min
2:30 min
4:00 min
> 99.5 %
< -0.20 %
45
Technical data
Packaging Accessories
Hydrophilic low viscosity A-silicone. Light consistency
• Maximum precision in detail reproduction• High tear strength• Excellent elastic recovery• High dimensional stability• Opaque pigments for improved detail
reading• Possibility of casting the model
immediately after disinfection• Safe disinfection with Zeta 7 Solution
and Zeta 7 Spray• 3-year shelf life
ADVANTAGES
• 1:1 Mixing ratio • Hydrophilic • Thixotropic • Ideal working time/setting time ratio
(snap-set effect): - Long working time; - Shorter permanence in the oral cavity • Biocompatible • Green colour
CHARACTERISTICS
• Fixed prostheses• Suggested techniques: two-stage
USE
C202070
C202090
C202100
Mixing tips small/yellow (x48)
Yellow oral tips (x48)
D2 Dispenser -1:1
A-Silicones - Impression materials
2 x 50 ml cartridges (Base + Catalyst) + 12 mixing tips small/yellow
Economy Pack: 10 x 50 ml cartridges
elite® HD+ Intro kit - Fast Set: 2 x 250 ml tubs Putty Fast (Base + Catalyst) + 1 x 50 ml cartridges Light Fast + 1x50 ml cartridges Super Light Fast + 1 D2 Dispenser + 12 mixing tips small/yellow + 6 yellow oral tips
elite® HD+ Mini Trial kit - Fast Set:2 x 100 ml tubs Putty Fast Fast (Base + Catalyst) + 1 x 50 ml cartridges Light Fast + 4 mixing tips small/yellow + 4 yellow oral tips
C203040
C203142
C203120
C203131
elite® HD+ Super Light BodyFast Set
47
Technical data
Hydrophilic very low viscosity A-silicone. Light consistency
ISO 4823 - ADA 19
Total working time (23°C/73°F)
Time in mouth
Setting time (23°C/73°F)
Elastic recovery
Dimensional stability (after 24 h)
Hardness (Shore A)
Type 3 Light-Bodied Consistency
1:30 min
2:30 min
4:00 min
> 99.5 %
< -0.20 %
45
• Maximum precision in detail reproduction • High tear strength• Excellent elastic recovery • High dimensional stability • Opaque pigments for improved detail
reading • Possibility of casting the model
immediately after disinfection• Safe disinfection with Zeta 7 Solution
and Zeta 7 Spray• 3-year shelf life
ADVANTAGES
• 1:1 Mixing ratio • Hydrophilic• Ideal working time/setting time ratio
(snap-set effect): - Long working time; - Shorter permanence in the oral cavity • Biocompatible • Lilac colour
CHARACTERISTICS
• Fixed prostheses• Suggested techniques: two-stage
USE
A-Silicones - Impression materials
Packaging Accessories
C202070
C202090
C202100
Mixing tips small/yellow (x48)
Yellow oral tips (x48)
D2 Dispenser -1:1
2 x 50 ml cartridges (Base + Catalyst) + 12 mixing tips small/yellow
Economy Pack: 10 x 50 ml cartridges
elite® HD+ Intro kit - Fast Set: 2 x 250 ml tubs Putty Fast (Base + Catalyst) + 1 x 50 ml cartridges Light Fast + 1x50 ml cartridges Super Light Fast + 1 D2 Dispenser + 12 mixing tips small/yellow + 6 yellow oral tips
C203050
C203146
C203120
elite® P&P Putty SoftNormal & Fast Set
49
A-silicones Precision & Performance
• High deformation strength• Excellent elastic recovery• High dimensional stability• Possible to pour the model immediately
after disinfection• Safe disinfection with Zeta 7 Solution
and Zeta 7 Spray• 3-year shelf life
ADVANTAGES
• 1:1 Mixing ratio• Final hardness: 60 Shore A• Ideal working time/setting time ratio
(snap-set effect): - Long working time - Shorter permanence in the oral cavity• Biocompatible
CHARACTERISTICS
• Fixed prostheses• Suggested technique: two-stage
or single stage
USE
A-Silicones - Impression materials
Technical data Normal Set Fast Set
Packaging
C206000
C206001
elite® P&P Putty Soft Normal Set2 x 250 ml tubs (Base + Catalyst)
elite® P&P Putty Soft Fast Set2 x 250 ml tubs (Base + Catalyst)
ISO 4823 - ADA 19
Mixing ratio Base:Catalyst
Mixing time
Total working time (23°C/73°F)
Time in mouth
Setting time (23°C/73°F)
Strain in compression (min - max)
Elastic recovery
Dimensional stability (after 24 h)
Hardness (Shore A)
Type 0 Putty Consistency
1:1
0:30 min
2:00 min
3:30 min
5:30 min
1 - 3 %
> 99 %
< -0.20 %
60 ± 2
Type 0 Putty Consistency
1:1
0:30 min
1:30 min
2:30 min
4:00 min
1 - 3 %
> 99 %
< -0.20 %
60 ± 2
Accessories
C206090
C207202
C202100
C207200
Mixing tips small (x20)
Mixing pad (12 sheets)
D2 Dispenser -1:1
Spatula for silicones
Kit
C206100
C206101
C206102
C206110
C206111
elite® P&P Intro Kit Light Normal Set - 2 x 250 ml tubs Putty Soft Normal (Base + Catalyst) + 2 x 60 ml tubes Light Body Normal + A-Silicone mixing pad
elite® P&P Intro Kit Regular Normal Set - 2 x 250 ml tubs Putty Soft Normal (Base + Catalyst) + 2 x 60 ml tubes Regular Body Normal + A-Silicone mixing pad
elite® P&P Intro Kit Light Normal Set - 2 x 250 ml tubs Putty Soft Normal (Base + Catalyst) + 2 x 50 ml cartridges Light Body Normal + D2 Dispenser + 6 mixing tips small/yellow - 2 Oral mixing tips
elite® P&P Trial Kit Light Normal Set - 2 x 100 ml tubs Putty Soft Normal + 2 x 60 ml tubes Light Body Normal
elite® P&P Trial Kit Regular Normal Set - 2 x 100 ml tubs Putty Soft Normal + 2 x 60 ml tubes Regular Body Normal
elite® P&P Regular BodyNormal & Fast Set
50
A-silicones Precision & Performance
• Maximum precision in detail reproduction• High tear strength• Excellent elastic recovery• High dimensional stability• Safe disinfection with Zeta 7 Solution
and Zeta 7 Spray• 3-year shelf life
ADVANTAGES
• 1:1 Mixing ratio• Hydrophilic• Thixotropic• Ideal working time/setting time ratio
(snap-set effect): - Long working time; - Shorter permanence in the oral cavity• Biocompatible• Purple colour
CHARACTERISTICS
• Fixed prostheses• Recommended for the Single-stage
impression technique or monophase with individual tray
USE
A-Silicones - Impression materials
Technical data Normal Set
Accessories
C206090
C207202
C202100
C207200
Mixing tips small (x20)
Mixing pad (12 sheets)
D2 Dispenser -1:1
Spatula for silicones
Packaging
C206021
C206012
elite® P&P Regular Normal Set2 x 60 ml tubes (Base + Catalyst)
elite® P&P Regular Normal Set2 x 50 ml cartridges (Base + Catalyst)+ 6 mixing tips small/yellow
ISO 4823
ADA 19
Mixing ratio Base:Catalyst
Mixing time
Total working time (23°C/73°F)
Time in mouth
Setting time (23°C/73°F)
Strain in compression (min - max)
Elastic recovery
Dimensional stability (after 24 h)
Hardness (Shore A)
Type 2 Medium-Bodied
Consistency
1:1
Tube Version: 0:30 min/ automix
2:00 min
3:30 min
5:30 min
3 - 5 %
> 99.5 %
< -0.20 %
45 ± 2
Kit
C206100
C206101
C206102
C206111
elite® P&P Intro Kit Light Normal Set - 2 x 250 ml tubs Putty Soft Normal (Base + Catalyst) + 2 x 60 ml tubes Light Body Normal + A-Silicone mixing pad
elite® P&P Intro Kit Regular Normal Set - 2 x 250 ml tubs Putty Soft Normal (Base + Catalyst) + 2 x 60 ml tubes Regular Body Normal + A-Silicone mixing pad
elite® P&P Intro Kit Light Normal Set - 2 x 250 ml tubs Putty Soft Normal (Base + Catalyst) + 2 x 50 ml cartridges Light Body Normal + D2 Dispenser + 6 mixing tips small/yellow - 2 Oral mixing tips
elite® P&P Trial Kit Regular Normal Set - 2 x 100 ml tubs Putty Soft Normal + 2 x 60 ml tubes Regular Body Normal
Equipment
C303230
C303215
C303231
Alghamix II - mechanical mixer for alginates, plasters and silicones 230V
Alghamix II - mechanical mixer for alginates, plasters and silicones 115V
Alghamix II - mechanical mixer for alginates, plasters and silicones 230V + UK plug
elite® P&P Light BodyNormal & Fast Set
51
A-silicones Precision & Performance
• Maximum precision in detail reproduction• High tear strength• Excellent elastic recovery• High dimensional stability• Safe disinfection with Zeta 7 Solution
and Zeta 7 Spray• 3-year shelf life
ADVANTAGES
• 1:1 Mixing ratio• Hydrophilic• Thixotropic• Ideal working time/setting time ratio
(snap-set effect): - Long working time; - Shorter permanence in the oral cavity• Biocompatible• Colour: - Light Blue (Normal Setting) - Orange (Fast Setting)
CHARACTERISTICS
• Fixed prostheses• Suggested techniques: two-stage or
single-stage technique with two viscosities
USE
A-Silicones - Impression materials
Technical data Normal Set Fast Set
Accessories
C206090
C207202
C202100
C207200
C207110
Mixing tips small (x20)
Mixing pad (12 sheets)
D2 Dispenser -1:1
Spatula for silicones
Syringe Zhermack for elastomers
Packaging
C206020
C206010
C206011
elite® P&P Light Normal Set2 x 60 ml tubes (Base + Catalyst)
elite® P&P Light Normal Set2 x 50 ml cartridges (Base + Catalyst) + 6 mixing tips small/yellow
elite® P&P Light Fast Set2 x 50 ml cartridges (Base + Catalyst) + 6 mixing tips small/yellow
ISO 4823
ADA 19
Mixing ratio Base:Catalyst
Mixing time
Total working time (23°C/73°F)
Time in mouth
Setting time (23°C/73°F)
Strain in compression (min - max)
Elastic recovery
Dimensional stability (after 24 h)
Hardness (Shore A)
Type 3 Light-Bodied
Consistency
1:1
Tube version: 0:30 min/ automix
2:00 min
3:30 min
5:30 min
3 - 5 %
> 99.5 %
< 0.20 %
45 ± 2
Type 3 Light-Bodied
Consistency
1:1
automix
1:30 min
2:30 min
4:00 min
3 - 5 %
> 99.5 %
< 0.20 %
45 ± 2
Kit
C206100
C206101
C206102
C206110
elite® P&P Intro Kit Light Normal Set - 2 x 250 ml tubs Putty Soft Normal (Base + Catalyst) + 2 x 60 ml tubes Light Body Normal + A-Silicone mixing pad
elite® P&P Intro Kit Regular Normal Set - 2 x 250 ml tubs Putty Soft Normal (Base + Catalyst) + 2 x 60 ml tubes Regular Body Normal + A-Silicone mixing pad
elite® P&P Intro Kit Light Normal Set - 2 x 250 ml tubs Putty Soft Normal (Base + Catalyst) + 2 x 50 ml cartridges Light Body Normal + D2 Dispenser + 6 mixing tips small/yellow - 2 Oral mixing tips
elite® P&P Trial Kit Light Normal Set - 2 x 100 ml tubs Putty Soft Normal + 2 x 60 ml tubes Light Body Normal
Equipment
C303230
C303215
C303231
Alghamix II - mechanical mixer for alginates, plasters and silicones 230V
Alghamix II - mechanical mixer for alginates, plasters and silicones 115V
Alghamix II - mechanical mixer for alginates, plasters and silicones 230V + UK plug
elite® implant Light BodyFast Set
53
Technical data
Packaging
ISO 4823 - ADA 19
Total working time (23°C/73°F)
Time in mouth
Setting time (23°C/73°F)
Hardness (Shore A)
C204060
Type 3 Light-Bodied Consistency
1:30 min
2:00 min
3:30 min
50
Sterile pack:
1 siringe 5 ml
1 mixing tip
1 intra-oral tip
1 safety life bag
A-Silicones - Impression materials for implantology
• Sterility ensures a reduction in post-operative complications of infectious origin
• A simple X-ray allows the identification of any fragments of residual material
• Total biocompatibility avoids tissue reactions
• Specifically for direct contact with open mucosa
• Single use packs are specifically for the surgical field
• The impression maintains the dimensional stability unaltered even after immersion in disinfecting solution
• The colour contrast with the blood allows easy reading of the detail, even where organic fluids are present
ADVANTAGES
• Sterile• Radiopaque• Biocompatible• Single use pack• Class IIa medical device• Dimensionally stable• Green colour
CHARACTERISTICS
• Recommended in association with elite® implant Medium Body directly on the implants and/or dental preparations
USE
Sterile A-Silicone for implantology. Light body consistency
While stocks last
elite® implant Medium BodyFast Set
54
Technical data
Packaging
ISO 4823 - ADA 19
Total working time (23°C/73°F)
Time in mouth
Setting time (23°C/73°F)
Hardness (Shore A)
C204000
Type 2 Medium-Bodied Consistency
1:30 min
2:00 min
3:30 min
55
Sterile pack:
1 cartridge 50 ml
1 mixing tip
1 intra-oral tip
1 safety life bag
A-Silicones - Impression materials for implantology
• Sterility ensures a reduction in post-operative complications of infectious origin
• A simple X-ray allows the identification of any fragments of residual material
• Total biocompatibility avoids tissue reactions
• Specifically for direct contact with open mucosa
• Single use packs are specifically for the surgical field
• The impression maintains the dimensional stability unaltered even after immersion in disinfecting solution
• The colour contrast with the blood allows easy reading of the detail, even where organic fluids are present
ADVANTAGES
• Sterile• Radiopaque• Biocompatible• Single use pack• Class IIa medical device• Dimensionally stable• Blue colour
CHARACTERISTICS
• For all implant techniques especially immediate-loading
• Ideal for impression of edentulous dental arches with implants and residual teeth
USE
Sterile A-Silicone for implantology. Medium body consistency
Accessories
C202100 D2 Dispenser -1:1
elite® implant Heavy BodyFast Set
55
Technical data
Packaging
ISO 4823 - ADA 19
Total working time (23°C/73°F)
Time in mouth
Setting time (23°C/73°F)
Hardness (Shore A)
C204030
Type 1 Heavy-bodied Consistency
1:30 min
2:00 min
3:30 min
70
Sterile pack:
1 cartridge 50 ml
1 mixing tip
1 intra-oral tip
1 safety life bag
A-Silicones - Impression materials for implantology
• Sterility ensures a reduction in post-operative complications of infectious origin
• A simple X-ray allows the identification of any fragments of residual material
• Total biocompatibility avoids tissue reactions
• Specifically for direct contact with open mucosa
• Single use packs are specifically for the surgical field
• The impression maintains the dimensional stability unaltered even after immersion in disinfecting solution
• The high final rigidity ensures precision in the transfer of the position of the implants
• The colour contrast with the blood allows easy reading of the detail, even where organic fluids are present
ADVANTAGES
• Sterile• Radiopaque• Biocompatible• Single use pack• Class IIa medical device• Dimensionally stable• Rigid• Light blue colour
CHARACTERISTICS
• For all implant techniques especially immediate-loading
• Ideal for impression of edentulous dental arches with implants only
USE
Sterile A-Silicone for implantology. Heavy body consistency
Accessories
C202100 Dispenser D2 -1:1
While stocks last
occlufast® ROCK
56
Technical data
Packaging Accessories
A-Silicone for bite registration
C200726
1:1
0:30 min
1:00 min
2 μm
-0.05 %
95
2 x 50 ml cartridges (Base + Catalyst) + 12 Mixing tips medium/green
C202080
C202095
C202100
Mixing tips medium/green (x48)
Bite tips (x48)
D2 Dispenser -1:1
A-Silicones - Bite registration materials
• Imperceptible consistency for the patient• Easy handling and bubble-free• Positioning control• Accurate and stable impressions: zero
thickness• Easy to trim for excess material removal• Flowable: it avoids pressure and slipping
during positioning• Accurate (2 μm): it reproduces the
occlusal details accurately• Stable: maximum dimensional variation
of just -0.05% after 24 hours allows long-term stability
• Non-deformable: it is not affected by any thermal shocks during transport
ADVANTAGES
• Final hardness (95 Shore A) • Fast: 60 secs permanence in the oral
cavity • Thixotropic• Purple colour
CHARACTERISTICS
• Maximum intercuspidation bite registration
• Centric, protrusion or lateral registrations• Gnathological evaluations• Diagnostic evaluation of cranialcervical-
mandibular disorders• Orthodontic centric occlusion
USE
Mixing ratio Base:Catalyst
Total working time (23°C/73°F)
Time in mouth
Detail reproduction
Dimensional stability (after 24 h)
Hardness (Shore A)
occlufast® CAD
57
Packaging
Technical data
Accessories
A-silicone for bite registration developed to be used with all CAD-CAM systems
Mixing ratio Base:Catalyst
Total working time (23°C/73°F)
Time in mouth
Detail reproduction
Dimensional stability (after 24 h)
Hardness (Shore A)
C200800
1:1
0:30 min
1:00 min
2 μm
- 0.05 %
95
2 x 50 ml cartridges (Base + Catalyst) + 12 Mixing tips medium/green
A-Silicones - Bite registration materials
C202080
C202095
C202100
Mixing tips medium/green (x48)
Bite tips (x48)
D2 Dispenser -1:1
• Compatible with CAD-CAM systems using optical, laser and contact reading
• Fast: 60 secs permanence in the oral cavity • Imperceptible consistency for the patient,
who bites naturally• After setting occlufast CAD can be
finished with a cutter and/or bur• Product easy to apply in the mouth, both
with the bite technique and vestibular side applications
ADVANTAGES
• Thixotropic, does not drip• Hard (95 Shore A)• Precise• Dimensionally stable over time and to
disinfection• Can be repositioned in the mouth and on
the models after setting• Light blue colour
CHARACTERISTICS
• Bite registrations using all techniques that require subsequent scanning by CAD-CAM systems
USE
colorbite D
58
Technical data
Packaging Accessories
Thermochromic A-Silicone for bite registration(the colour change indicates that setting time is complete)
Mixing ratio Base:Catalyst
Total working time (23°C/73°F)
Time in mouth
Detail reproduction
Dimensional stability (after 24 h)
Hardness (Shore A)
C200750
1:1
0:30 min
1:00 min
2 μm
- 0.05 %
45
2 x 50 ml cartridges (Base + Catalyst) + 12 Mixing tips medium/green
A-Silicones - Bite registration materials
C202080
C202095
C202100
Mixing tips medium/green (x48)
Bite tips (x48)
D2 Dispenser -1:1
• The use of thermochromic pigments permits the visible control of the various steps, minimizing the margin of error
• Unperceivable: natural bite registration• It can be finished after setting with a
cutting blade or bur• Easy positioning both in the occlusal
and in the buccal techniques
ADVANTAGES
• Thermocromic: a new technology which uses temperature-sensitive pigments
• Final hardness (45 Shore D) • Fast: 60 secs permanence in the oral cavity • Thixotropic, it does not trip• Very accurate• Dimensionally stable in time and under
disinfection• Can be repositioned for a check after
setting• Easy to finish• Lime flavour • Colour: green at 23°C (73°F) / yellow
above 30°C (86°F)
CHARACTERISTICS
• Bite registrations with all techniques• Intermaxillary centric, protusion or lateral
registration keys• Registrations for diagnostic evaluations
of craniomandibular disorders• Orthodontic bite registrations
USE
colorbite ROCK
59
Packaging
Technical data
Accessories
Extra Fast thermochromic A-Silicone for bite registration(the colour change indicates that setting time is complete)
Mixing ratio Base:Catalyst
Total working time (23°C/73°F)
Time in mouth
Detail reproduction
Dimensional stability (after 24 h)
Hardness (Shore A)
C200760
1:1
0:30 min
0:45 min
2 μm
- 0.05 %
95
2 x 50 ml cartridges (Base + Catalyst) + 12 Mixing tips medium/green
A-Silicones - Bite registration materials
C202080
C202095
C202100
Mixing tips medium/green (x48)
Bite tips (x48)
D2 Dispenser -1:1
• The use of thermochromic pigments permits the visible control of the various steps, minimizing the margin of error
• Unperceivable: natural bite registration• It can be finished after setting with a
cutting blade or bur• Easy positioning both in the occlusal
and in the buccal techniques
ADVANTAGES
• Thermocromic: a new technology which uses temperature-sensitive pigments
• Final hardness (95 Shore A)• Extra Fast: 45 secs permanence in the
oral cavity • Thixotropic• Very accurate• Dimensionally stable in time and under
disinfection• Can be repositioned for a check after
setting• Easy to finish• Raspberry Flavour• Colour: purple at 23°C (73°F) / pink
above 30°C (86°F)
CHARACTERISTICS
• Maximum intercuspidation bite registration
• Centric, protrusion or lateral registrations• Gnathological evaluations• Diagnostic evaluation of cranialcervical-
mandibular disorders• Orthodontic centric occlusion
USE
universal tray adhesive
60
Packaging
Adhesive for A-silicones
A-Silicones - Adhesives
• Excellent bonding to metal trays• Does not create thickness• Fast solvent evaporation
ADVANTAGES
• Easy brushing adhesive• Light blue colour
CHARACTERISTICS
• Special adhesive for standard metal trays
USE
C700025 1 bottle, 10 ml
elite® iperlink SCT
elite® iperlink LCT
61
Adhesive for A-silicones
A-Silicones - Adhesives
• Avoids permanent deformations due to impression material detachment during the removal of the tray from the oral cavity
• Fast: ready in a few seconds• Effective: active for many hours before
the application of impression material• Safe: creates a definite chemical bond
between A-silicones and the tray
ADVANTAGES
elite® iperlink SCT• One-component: adhesive • Perfect bonding between A-silicones and
self-curing resin or plastic trays• It does not create thickness
elite® iperlink LCT• Two-component: Prep (primer) + Link
(adhesive) • Creates perfect bonding between
A-silicones and light-curing resin trays • It does not create thickness
CHARACTERISTICS
elite® iperlink SCT• Special adhesive for self-curing resin or
plastic trays
elite® iperlink LCT• Special adhesive for light-curing resin
trays
USE
Technical data
Packaging
Reference
Adhesive tensile strenght
C700070 C700080
> 0.59 N/mm2
elite® iperlink SCT 1 bottle, 5 ml
elite® iperlink LCT 1 bottle Prep, 5 ml + 1 bottle Link, 5 ml
Adhesion between elastomers and individual trays. DegreeResearch. Supervisor: Prof. M. Franchi. Graduand: Demis Barbin.University of Ferrara.
62
Accessories
Mixing tips D2 Dispenser
Bite tips
A-Silicones
Oral tips
Spatula for silicones
Zhermack Syringe for elastomers
Mixing pad
Dynamic-static mixing tips Mixing tip lockers
Packaging
C202080
C202070
C205501
C205500
C206090
C202095
C202090
C202091
C205530
C205540
C700025
C207200
C207202
C202100
C207110
C207112
C207113
D510010
Mixing tips medium/green (x48)
Mixing tips small/yellow (x48)
Mixing tips extra-large/lilac (x48)
Mixing tips large/pink (x48)
Mixing tips small/yellow (x20) - elite® P&P
Bite tips (x48)
Yellow oral tips (x48)
Clear oral mixing tips (x48)
Dynamic-static mixing tips (x50)
Mixing tip lockers (x2)
1 bottle Universal Tray Adhesive 10 ml
Spatula for silicones
Mixing pad (12 sheets)
D2 Dispenser -1:1
Zhermack Syringe for elastomers
Bayonet ring for Syringe
Oral tips for syringe
Putty cut
C-SiliconesImpression materials
zetaplus
zetaplus SOFT
oranwash® L
oranwash® VL
thixoflex® M
orthogum
indurent gel
indurent liquid
accessories - zetaplus system
zetaflow Putty
zetaflow Light
zetaflow Catalyst
accessories - zetaflow
64
65
66
67
68
69
70
71
72
73
74
75
76
zetaplus
64
Technical data
Packaging
Accessories
Very high viscosity C-silicone Putty
ISO 4823 - ADA 19
Mixing time
Total working time (23°C/73°F)
Time in mouth
Setting time (23°C/73°F)
Compressive deformation (min-max)
Elastic recovery
Dimensional stability (after 24 h)
Type 0 Putty Consistency
0:30 min
1:15 min
3:15 min
4:30 min
2 - 5 %
> 98 %
< -0.2 %
C-Silicones - Impression materials
• Reduces mucous compression in the phase of insertion in the oral cavity
• Excellent hardness after setting• In the two-stage technique, it acts
perfectly as a special tray • In double mixing, it adapts to the
consistency of low viscosity fluid • Variable working and setting times
according to catalyst quantity (indurent gel)• Safe disinfection with Zeta 7 Solution and
Zeta 7 Spray
ADVANTAGES
• High initial flowability • Green colour • Spearmint flavour
CHARACTERISTICS
• Two-stage technique • Single-stage technique with two
viscosities
USE
D510010
C100700
C100390
Putty cut
Indurent gel 1 tube, 60 ml
Indurent liquid 1 bottle, 30 ml
C100600
C100312
C100468
C100469
C100720
C100730
1 tub, 900 ml (1.53 kg)
1 tub, 1800 ml (3 kg)
1 container, 10 kg
1 container, 25 kg
zetaplus L Trial kit: zetaplus 200 ml + oranwash L 40 ml
+ indurent gel 60 ml + mixing pad (20 sheets)
zetaplus L Intro kit: zetaplus 900 ml + oranwash L 140 ml
+ indurent gel 60 ml + mixing pad (20 sheets)
zetaplus SOFT
65
Technical data
Very high viscosity C-silicone Putty
ISO 4823 - ADA 19
Mixing time
Total working time (23°C/73°F)
Time in mouth
Setting time (23°C/73°F)
Compressive deformation (min-max)
Elastic recovery
Dimensional stability (after 24 h)
Type 0 Putty Consistency
0:30 min
1:15 min
3:15 min
4:30 min
2 - 5 %
> 98 %
< -0.2 %
C-Silicones - Impression materials
• Particularly flowable in the phase of insertion in the oral cavity
• Excellent hardness/elasticity ratio• Variable working and setting times
according to catalyst quantity (indurent gel)• Easy removal from the oral cavity with no
risk of permanent deformation• Safe disinfection with Zeta 7 Solution and
Zeta 7 Spray
ADVANTAGES
• High initial flowability • Yellow colour • Spearmint flavour
CHARACTERISTICS
• Two-stage technique • Single-stage technique with two
viscosities• Clinical situations involving marked
undercuts
USE
Packaging
Accessories
C100610
C100612
C100613
C100710
C100740
1 tub, 900 ml (1.53 kg)
1 tub, 1800 ml (3 kg)
1 container, 10 kg
zetaplus VL Trial kit: zetaplus soft 200 ml + oranwash VL 40 ml
+ indurent gel 60 ml + mixing pad (20 sheets)
zetaplus VL Intro kit: zetaplus soft 900 ml + oranwash VL 140 ml
+ indurent gel 60 ml + mixing pad (20 sheets)
D510010
C100700
C100390
Putty cut
Indurent gel 1 tube, 60 ml
Indurent liquid 1 bottle, 30 ml
oranwash® L
66
Technical data
Low viscosity C-silicone
ISO 4823 - ADA 19
Mixing time
Total working time (23°C/73°F)
Time in mouth
Setting time (23°C/73°F)
Compressive deformation (min-max)
Elastic recovery
Dimensional stability (after 24 h)
• Flowable consistency• Perfect flowability in the gingival sulcus• Safe disinfection with Zeta 7 Solution and
Zeta 7 Spray • Simple and fast mixing without bubbles
with alghamix II - Zhermack
ADVANTAGES
• Hydrophilic • Yellow colour • Orange flavour
CHARACTERISTICS
• Ideal for two-stage technique• Single-stage technique with two
viscosities
USE
C100390
C100700
C207200
C207201
C207110
Indurent liquid 1 bottle, 30 ml
Indurent gel 1 tube, 60 ml
Spatula for silicones
Mixing pad (20 sheets)
Zhermack Syringe for elastomers
Accessories
C-Silicones - Impression materials
Type 3 Light-Bodied Consistency
0:30 min
1:30 min
3:30 min
5:00 min
2 - 8 %
> 99 %
< -0.7 %Equipment
C303230
C303215
C303231
Alghamix II - mechanical mixer for alginates, plasters and silicones 230V + mixing cup and spatula for alginates
Alghamix II - mechanical mixer for alginates, plasters and silicones 115V + mixing cup and spatula for alginates
Alghamix II - mechanical mixer for alginates, plasters and silicones 230V + mixing cup and spatula for alginates + UK plug
Packaging
C100660
C100720
1 tube, 140 ml
Zetaplus - Oranwash L Trial kit:Zetaplus 200 ml + Oranwash L 40 ml + Indurent Gel 60 ml + mixing pad (20 sheets)
oranwash® VL
67
Technical data
ISO 4823 - ADA 19
Mixing time
Total working time (23°C/73°F)
Time in mouth
Setting time (23°C/73°F)
Compressive deformation (min-max)
Elastic recovery
Dimensional stability (after 24 h)
C100390
C100700
C207200
C207201
C207110
Indurent liquid 1 bottle, 30 ml
Indurent gel 1 tube, 60 ml
Spatula for silicones
Mixing pad (20 sheets)
Zhermack Syringe for elastomers
Accessories
Low viscosity C-silicone
• Maximum precision • Excellent flowability• Safe disinfection with Zeta 7 Solution and
Zeta 7 Spray • Simple and fast mixing without bubbles
with alghamix II - Zhermack
ADVANTAGES
• Hydrophilic• Blue colour
CHARACTERISTICS
• Two-stage technique• Single-stage technique with two
viscosities
USE
C-Silicones - Impression materials
Equipment
C303230
C303215
C303231
Alghamix II - mechanical mixer for alginates, plasters and silicones 230V + mixing cup and spatula for alginates
Alghamix II - mechanical mixer for alginates, plasters and silicones 115V + mixing cup and spatula for alginates
Alghamix II - mechanical mixer for alginates, plasters and silicones 230V + mixing cup and spatula for alginates + UK plug
Type 3 Light-Bodied Consistency
0:30 min
1:30 min
3:30 min
5:00 min
2 - 8 %
> 99 %
< -0.7 %
Packaging
C100650
C100710
1 tube, 140 ml
Zetaplus VL Trial kit:Zetaplus Soft 200 ml + Oranwash VL 40 ml+ Indurent Gel 60 ml+ mixing pad (20 sheets)
thixoflex® M
68
Low viscosity C-silicone
• Mucostatic (not compressive for the soft tissues)
• High flowability during working• Safe disinfection with Zeta 7 Solution and
Zeta 7 Spray • Simple and fast mixing without bubbles
with alghamix II - Zhermack
ADVANTAGES
• Hydrophilic• Thixotropic • Light blue colour
CHARACTERISTICS
• Removable prostheses relining• Ideal for single-stage technique with two
viscosities• Two-stage technique
USE
C-Silicones - Impression materials
Technical data
ISO 4823 - ADA 19
Mixing time
Total working time (23°C/73°F)
Time in mouth
Setting time (23°C/73°F)
Compressive deformation (min-max)
Elastic recovery
Dimensional stability (after 24 h)
Type 3 Light-Bodied Consistency
0:30 min
2:00 min
3:30 min
5:30 min
2 - 8 %
> 99 %
< -0.7 %
C100390
C100700
C207200
C207201
C207110
Indurent liquid 1 bottle, 30 ml
Indurent gel 1 tube, 60 ml
Spatula for silicones
Mixing pad (20 sheets)
Zhermack Syringe for elastomers
Accessories
Equipment
C303230
C303215
C303231
Alghamix II - mechanical mixer for alginates, plasters and silicones 230V + mixing cup and spatula for alginates
Alghamix II - mechanical mixer for alginates, plasters and silicones 115V + mixing cup and spatula for alginates
Alghamix II - mechanical mixer for alginates, plasters and silicones 230V + mixing cup and spatula for alginates + UK plug
Packaging
C100670 1 tube, 140 ml
orthogum
69
Technical data
Packaging
Special orthodontic C-silicone Putty
ISO 4823 - ADA 19
Mixing time
Total working time (23°C/73°F)
Time in mouth
Setting time (23°C/73°F)
Compressive deformation (min-max)
Elastic recovery
Dimensional stability (after 24 h)
C100540
C100550
Type 0 Putty Consistency
0:30 min
1:00 min
1:00 min
2:30 min
2 - 5 %
> 99 %
< -0.35 %
1 tub, 500 ml (820 g)
1 tub, 1500 ml (2.46 kg)
• Precision impressions with fixed orthodontic appliances
• Extremely easy and fast mixing with gel catalyst (indurent gel)
• Good dimensional stability and possibility to develop the model even after 48 hours
• Possibility of obtaining multiple models with the same impression
• Safe disinfection with Zeta 7 Solution and Zeta 7 Spray
ADVANTAGES
• Fast setting • Very high elasticity• High tear strength• Yellow colour • Pleasant flavour with emetic reflex
reduction• Bubblegum flavour
CHARACTERISTICS
• Orthodontic impressions• Single product for single-impression
technique
USE
C100390
C100700
Indurent liquid 1 bottle, 30 ml
Indurent gel 1 tube, 60 ml
Accessories
C-Silicones - Impression materials
indurent gel
70
Gel catalyst for C-Silicones
• Used with the same length as oranwash VL, oranwash L and thixoflex M on the mixing pad
• Total using versatility in the different impression techniques
• Easy dispensing
ADVANTAGES
• Red gel for homogeneous mixing control
CHARACTERISTICS
• Single catalyst for all Zhermack clinical C-silicones (zetaplus system) and technical (zetalabor and titanium)
USE
Dosage
Packaging
C100700 1 tube, 60 ml
Oranwash VL
Oranwash L
Thixoflex M
Zetaplus Soft
Zetaplus
Orthogum
Same length on the mixing pad
2 strips (the length of the scoop head) for each scoop of putty
C-Silicones - Impression materials
indurent liquid
71
Liquid catalyst for C-silicones
• Ratio: one drop for each notch of oranwash VL, oranwash L and thixoflex M on the mixing pad
• Total using versatility in the different impression techniques
• Easy dispensing
ADVANTAGES
• Colourless liquid
CHARACTERISTICS
• Single catalyst for all Zhermack clinical C-silicones (zetaplus system) and technical (zetalabor and titanium)
USE
Dosage
Packaging
C100390 1 bottle, 30 ml
Oranwash VL
Oranwash L
Thixoflex M
Zetaplus Soft
Zetaplus
Orthogum
One drop for each notch of light body on the mixing pad
5 - 6 drops for each measurer of material
C-Silicones - Impression materials
72
Accessories - zetaplus system
C207201
C207200
D510010
C700025
C207110
Mixing pad (20 sheets)
Spatula for silicones
Putty cut
1 bottle Universal Tray Adhesive 10 ml
Zhermack Syringe for elastomers
Packaging
Spatula for silicones
Putty cut Zhermack Syringe for elastomers
Universal Tray Adhesive
Mixing pad
C-Silicones
zetaflow Putty
73
Technical data
Packaging
Very high viscosity C-Silicone
ISO 4823 - ADA 19
Mixing time
Total working time (23°C/73°F)
Time in mouth
Setting time (23°C/73°F)
Strain in compression (min - max)
Recovery from deformation
Dimensional stability (after 24 h)
Type 0 Putty Consistency
0:30 min
1:15 min
3:15 min
4:30 min
2 - 5 %
> 98 %
≤ -0.2 %
1 tub, 900 ml (1.53 Kg)
Zetaflow Intro Kit: zetaflow Putty 900 ml + zetaflow Light 140 ml
+ zetaflow Catalyst 60 ml + mixing pad (20 sheets)
Zetaflow Trial Kit: zetaflow Putty 200 ml + zetaflow Light 40 ml
+ zetaflow Catalyst 60 ml + mixing pad (20 sheets)
C100800
C100850
C100859
• Particularly flowable during the insertion into the mouth
• Excellent balance between elasticity and rigidity
• In the two-stage technique, it is perfect as a special tray (individual impression tray)
• Easy removal from the mouth without risk of permanent deformations (zetaflow Catalyst)
• Safe disinfection with Zeta 7 Solution and Zeta 7 Spray
• 3-year shelf life
ADVANTAGES
• High initial smoothness which allows simple and safe manual mixing
• Orange colour • Raspberry flavour
CHARACTERISTICS
• Fixed prostheses• Recommended for the two-stage
impression technique
USE
C-Silicones - Impression materials
Accessories
D510010
C100890
Putty cut
Zetaflow Catalyst 1 tube, 60 ml
zetaflow Light
74
Light body (low viscosity) C-Silicone for fixed prostheses
• Very smooth • Ability to reveal the minimum details
in the gingival sulcus even in a humid environment due to its superior hydrophilic nature
• Ideal working time/setting time ratio (snap-set effect):
- Long working time; - Shorter permanence in the oral cavity • Safe disinfection with Zeta 7 Solution and
Zeta 7 Spray • Simple and fast mixing without bubbles
with alghamix II - Zhermack• 3-year shelf life
ADVANTAGES
• Fluid with very high hydrophilic nature • Blue colour
CHARACTERISTICS
• Fixed prostheses• Recommended for the two-stage
impression technique
USE
C-Silicones - Impression materials
Technical data
ISO 4823 - ADA 19
Mixing time
Total working time (23°C/73°F)
Time in mouth
Setting time (23°C/73°F)
Compressive deformation (min-max)
Elastic recovery
Dimensional stability (after 24 h)
Type 3 Light-Bodied Consistency
0:30 min
1:30 min
3:30 min
5:00 min
2 - 8 %
> 99 %
≤ -0.7 %
C207200
C207201
C100890
C207110
Spatula for silicones
Mixing pad (20 sheets)
Zetaflow Catalyst 1 tube 60 ml
Zhermack Syringe for elastomers
Accessories
Equipment
C303230
C303215
C303231
Alghamix II - mechanical mixer for alginates, plasters and silicones 230V + mixing cup and spatula for alginates
Alghamix II - mechanical mixer for alginates, plasters and silicones 115V + mixing cup and spatula for alginates
Alghamix II - mechanical mixer for alginates, plasters and silicones 230V + mixing cup and spatula for alginates + UK plug
Packaging
C100810 1 tube, 140 ml
zetaflow Catalyst
75
Dosage
Packaging
Catalyst gel specific for zetaflow product range
C100890 1 tube, 60 ml
• Used with the same length as zetaflow light on the mixing pad
• Homogeneous mix with zetaflow Light and zetaflow Putty thanks to the colour contrast. The good colour contrast allows homogeneous mixing
• Versatile • Easily dosage • 3-year shelf life
ADVANTAGES
• Yellow colour for homogeneous mixing control
CHARACTERISTICS
• Single catalyst for zetaflow Putty and zetaflow Light
USE
Zetaflow Light
Zetaflow Catalyst
Zetaflow Putty
Zetaflow Catalyst
Same length on the mixing pad
1 strip of Catalyst for 1 measurer of putty material
C-Silicones - Impression materials
76
Accessories - zetaflow
C207201
C207200
D510010
C700025
C207110
C202090
Mixing pad (20 sheets)
Spatula for silicones
Putty cut
1 bottle Universal Tray Adhesive 10 ml
Zhermack Syringe for elastomers
Yellow oral tips (48 pz)
Packaging
C-Silicones
Spatula for silicones
Putty cut Zhermack Syringe for elastomers
Universal Tray Adhesive
Mixing pad
“Long Life System” Alginateshydrocolor 5
hydrogum® 5
hydrogum®
hydrogum® SOFT
neocolloid®
orthoprint®
tropicalgin
phase® PLUS
Detergentalgitray Powder / Liquid
accessories
78
79
80
81
82
83
84
85
86
87
hydrocolor 5
78
Chromatic high dimensional stability alginate
“Long Life System” Alginates
• Offers a visual guide for mixing, work and mouth times
• Easy mixing• Homogenous mass, smooth, compact
surfaces• Pleasant and comfortable for the patient• Long impression storage (5 days of
dimensional stability)• Water absorption in 5 seconds• Safe disinfection with Zeta 7 Solution e
Zeta 7 Spray• Easy and simple bubble-free mixing with
Alghamix II• 5-year shelf life
ADVANTAGES
• High dimensional stability alginate• Fast setting time• Thixotropic• Three-phase chromatic alginate: - Fuchsia phase: mixing time - Violet phase: working time - Light Blue phase: time in mouth• Flavour: cool berry – fresh sensation
CHARACTERISTICS
• Study models in general• Recommended for paediatric odontology• Removable and partial dentures• Antagonists in fixed and removable
prosthesis• Temporary crowns and bridges
USE
Technical data
Mixing time
Total working time (23°C/73°F)
Time in mouth
Setting time (23°C/73°F)
Elastic recovery (ISO 1563)
Permanent deformation (ISO 1563)
Compressive strength (ISO 1563)
<0:30 min
1:10 min
1:00 min
2:10 min
97 %
12 %
1.1 MPa
Packaging
C302120
C302125
C302130
1 bag, 453 g
1 tub + 2 bags 453 g each + Set of measures
1 single-dose bag, 21 g
Equipment
C303230
C303215
C303231
Alghamix II - mechanical mixer for alginates, plasters and silicones 230V + mixing cup and spatula for alginates
Alghamix II - mechanical mixer for alginates, plasters and silicones 115V + mixing cup and spatula for alginates
Alghamix II - mechanical mixer for alginates, plasters and silicones 230V + mixing cup and spatula for alginates + UK plug
Accessories
C300900
C300992
C300990
C300960
Set of measures for Hydrocolor 5 (1 measure water + 1 measure powder)
1 rubber mixing bowl
Fluo coloured mixing spatulas for alginates (x6)
Long Life Bags (x100)(hermetic bags for impression storage)
hydrogum® 5
79
Technical data
Packaging
“Long Life System” Alginates
5 Days stability alginate, extra fast setting - dust free
Mixing time
Total working time (23°C/73°F)
Time in mouth
Setting time (23°C/73°F)
Elastic recovery (ISO 1563)
Permanent deformation (ISO 1563)
Compressive strength (ISO 1563)
Water loss after 5 days
C302070
C302071
C302075
< 0:30 min
1:05 min
0:45 min
1:50 min
98 %
13 %
1.2 MPa
0.5 %
1 bag, 453 g
1 tub + 2 bags, 453 g each
1 single dose sachet, 21 g
• Very long impression storage (5 days stability)
• Extra fast water absorption (5 secs.)• Easy mixing• Homogenous mass, smooth, compact
surfaces• Safe disinfection with Zeta 7 Solution and
Zeta 7 Spray • Simple and fast mixing without bubbles
with alghamix II - Zhermack• 5-year shelf life
ADVANTAGES
• High dimensional stability alginate • Extra fast working and setting times • Thixotropic • Exotic fruity flavour (mangustan)• Liliac colour • Dustfree
CHARACTERISTICS
• Temporary crown & bridges• Removable prostheses and chromes• Study models• Antagonists in fixed and removable
prostheses
USE
Equipment
C303230
C303215
C303231
Alghamix II - mechanical mixer for alginates, plasters and silicones 230V + mixing cup and spatula for alginates
Alghamix II - mechanical mixer for alginates, plasters and silicones 115V + mixing cup and spatula for alginates
Alghamix II - mechanical mixer for alginates, plasters and silicones 230V + mixing cup and spatula for alginates + UK plug
Accessories
C300900
C300992
C300990
C300960
Set of measures for hydrogum® 5 (1 measure water + 1 measure powder)
1 rubber mixing bowl
Fluo coloured mixing spatulas for alginates (x6)
Long Life Bags (x100)(hermetic bags for impression storage)
hydrogum®
80
Technical data
“Long Life System” Alginates
Fast setting elastic dust free alginate
Mixing time
Total working time (23°C/73°F)
Time in mouth
Setting time (23°C/73°F)
Elastic recovery (ISO 1563)
Permanent deformation (ISO 1563)
Compressive strength (ISO 1563)
0:30 min
1:10 min
1:00 min
2:10 min
98 %
11.7 %
1.2 MPa
• Fast water absorption• Easy mixing• Homogenous mass, smooth, compact
surfaces• Long impression storage• Safe disinfection with Zeta 7 Solution and
Zeta 7 Spray• Simple and fast mixing without bubbles
with alghamix II - Zhermack• 5-year shelf life
ADVANTAGES
• Elastic alginate • Fast working and setting times • Thixotropic • Mint flavour • Green colour • Dust free
CHARACTERISTICS
• Removable prostheses and chromes• Study models• Antagonists in fixed and removable
prostheses
USE
Accessories
C300910
C300992
C300990
C300960
Set of measures for alginate (1 measure water + 1 measure powder)
1 rubber mixing bowl
Fluo coloured mixing spatulas for alginates (x6)
Long Life Bags (x100)(hermetic bags for impression storage)
Packaging
C302025
C302041
C302051
1 bag, 500 g
1 tub + 2 bags, 500 g each
1 single dose sachet, 18 g
Equipment
C303230
C303215
C303231
Alghamix II - mechanical mixer for alginates, plasters and silicones 230V + mixing cup and spatula for alginates
Alghamix II - mechanical mixer for alginates, plasters and silicones 115V + mixing cup and spatula for alginates
Alghamix II - mechanical mixer for alginates, plasters and silicones 230V + mixing cup and spatula for alginates + UK plug
hydrogum® SOFT
81
Fast setting extra-elastic dust free alginate
“Long Life System” Alginates
• Fast water absorption• Easy mixing• Homogenous mass, smooth, compact
surfaces• Long impression storage• Safe disinfection with Zeta 7 Solution and
Zeta 7 Spray• Simple and fast mixing without bubbles
with alghamix II - Zhermack• 5-year shelf life
ADVANTAGES
• Extra elastic alginate • Fast working and setting times • Thixotropic • Mint flavour • Light blue colour • Dust free
CHARACTERISTICS
• Removable prostheses and chromes• Study models• Antagonists in fixed and removable
prostheses
USE
Technical data
Packaging
Mixing time
Total working time (23°C/73°F)
Time in mouth
Setting time (23°C/73°F)
Elastic recovery (ISO 1563)
Permanent deformation (ISO 1563)
Compressive strength (ISO 1563)
C302060
C302044
0:30 min
1:10 min
1:00 min
2:10 min
98 %
11.9 %
1 MPa
1 bag, 453 g
1 single dose sachet, 18 g
Equipment
C303230
C303215
C303231
Alghamix II - mechanical mixer for alginates, plasters and silicones 230V + mixing cup and spatula for alginates
Alghamix II - mechanical mixer for alginates, plasters and silicones 115V + mixing cup and spatula for alginates
Alghamix II - mechanical mixer for alginates, plasters and silicones 230V + mixing cup and spatula for alginates + UK plug
Accessories
C300910
C300992
C300990
C300960
Set of measures for alginate (1 measure water + 1 measure powder)
1 rubber mixing bowl
Fluo coloured mixing spatulas for alginates (x6)
Long Life Bags (x100)(hermetic bags for impression storage)
neocolloid®
82
Normal setting, high precision dust free alginate
“Long Life System” Alginates
• Fast water absorption• Easy mixing• Homogenous mass, smooth, compact
surfaces• Long impression storage• Safe disinfection with Zeta 7 Solution and
Zeta 7 Spray• Simple and fast mixing without bubbles
with alghamix II - Zhermack• 5-year shelf life
ADVANTAGES
• Hi-flow alginate • Injectable • High precision • Normal working time • Thixotropic • Herbal flavour • Orange colour • Dust free
CHARACTERISTICS
• Precision impressions• Chromes
USE
Technical data
Mixing time
Total working time (23°C/73°F)
Time in mouth
Setting time (23°C/73°F)
Elastic recovery (ISO 1563)
Permanent deformation (ISO 1563)
Compressive strength (ISO 1563)
0:45 min
2:00 min
1:30 min
3:30 min
99 %
10.3 %
1.1 MPa
Packaging
C302205
C302230
1 bag, 500 g
1 single dose sachet , 18 g
Equipment
C303230
C303215
C303231
Alghamix II - mechanical mixer for alginates, plasters and silicones 230V + mixing cup and spatula for alginates
Alghamix II - mechanical mixer for alginates, plasters and silicones 115V + mixing cup and spatula for alginates
Alghamix II - mechanical mixer for alginates, plasters and silicones 230V + mixing cup and spatula for alginates + UK plug
Accessories
C300910
C300992
C300990
C300960
Set of measures for alginate (1 measure water + 1 measure powder)
1 rubber mixing bowl
Fluo coloured mixing spatulas for alginates (x6)
Long Life Bags (x100)(hermetic bags for impression storage)
orthoprint®
83
Extra-rapid dust free, orthodontic alginate
“Long Life System” Alginates
• Fast water absorption• Easy mixing• Homogenous mass, smooth, compact
surfaces• Long impression storage• Safe disinfection with Zeta 7 Solution and
Zeta 7 Spray• Simple and fast mixing without bubbles
with alghamix II - Zhermack• 5-year shelf life
ADVANTAGES
• Highly elastic alginate • Extra-rapid fast working and setting
times • Thixotropic • Pleasant vanilla flavour with emetic reflex
reduction • Yellow colour • Dust free
CHARACTERISTICS
• Orthodontic impressions• Study models
USE
Technical data
Packaging
Mixing time
Total working time (23°C/73°F)
Time in mouth
Setting time (23°C/73°F)
Elastic recovery (ISO 1563)
Permanent deformation (ISO 1563)
Compressive strength (ISO 1563)
C302145
C302161
C302171
0:30 min
1:05 min
0:45 min
1:50 min
98 %
11 %
1.2 MPa
1 bag, 500 g
1 tub + 2 bags, 500 g each
1 single dose sachet, 18 g
Equipment
C303230
C303215
C303231
Alghamix II - mechanical mixer for alginates, plasters and silicones 230V + mixing cup and spatula for alginates
Alghamix II - mechanical mixer for alginates, plasters and silicones 115V + mixing cup and spatula for alginates
Alghamix II - mechanical mixer for alginates, plasters and silicones 230V + mixing cup and spatula for alginates + UK plug
Accessories
C300910
C300992
C300990
C300960
Set of measures for alginate (1 measure water + 1 measure powder)
1 rubber mixing bowl
Fluo coloured mixing spatulas for alginates (x6)
Long Life Bags (x100)(hermetic bags for impression storage)
tropicalgin
84
Fast setting chromatic alginate with tropical flavour
“Long Life System” Alginates
• Fast water absorption• Easy mixing• Homogenous mass, smooth, compact
surfaces• Long impression storage• Safe disinfection with Zeta 7 Solution and
Zeta 7 Spray• Simple and fast mixing without bubbles
with alghamix II - Zhermack• 5-year shelf life
ADVANTAGES
• Three-phase chromatic alginate: - Red phase: mixing time - Light orange phase: working time - Yellow phase: time in mouth• Fast working and setting times• Thixotropic• Mango flavour• Dust free
CHARACTERISTICS
• Removable prostheses• Study models• Antagonists in fixed and removable
prostheses
USE
Technical data
Mixing time
Total working time (23°C/73°F)
Time in mouth
Setting time (23°C/73°F)
Elastic recovery (ISO 1563)
Permanent deformation (ISO 1563)
Compressive strength (ISO 1563)
0:45 min
1:35 min
1:00 min
2:35 min
99 %
11.5 %
1.4 MPa
Packaging
C302240
C302242
C302245
1 bag, 453 g
1 tub + 2 bags, 453 g each
1 single dose sachet, 18 g
Equipment
C303230
C303215
C303231
Alghamix II - mechanical mixer for alginates, plasters and silicones 230V + mixing cup and spatula for alginates
Alghamix II - mechanical mixer for alginates, plasters and silicones 115V + mixing cup and spatula for alginates
Alghamix II - mechanical mixer for alginates, plasters and silicones 230V + mixing cup and spatula for alginates + UK plug
Accessories
C300910
C300992
C300990
C300960
Set of measures for alginate (1 measure water + 1 measure powder)
1 rubber mixing bowl
Fluo coloured mixing spatulas for alginates (x6)
Long Life Bags (x100)(hermetic bags for impression storage)
phase® PLUS
85
Fast setting chromatic dust free alginate
“Long Life System” Alginates
• Fast water absorption• Easy mixing• Homogenous mass, smooth, compact
surfaces• Long impression storage• Safe disinfection with Zeta 7 Solution and
Zeta 7 Spray• Simple and fast mixing without bubbles
with alghamix II - Zhermack• 5-year shelf life
ADVANTAGES
• Three-phase chromatic alginate: - Violet phase: mixing time - Pink phase: working time - White phase: time in mouth• Fast working and setting times• Thixotropic• Spearmint flavour
CHARACTERISTICS
• Removable prostheses• Study models• Antagonists in fixed and removable
prostheses
USE
Technical data
Packaging
Mixing time
Total working time (23°C/73°F)
Time in mouth
Setting time (23°C/73°F)
Elastic recovery (ISO 1563)
Permanent deformation (ISO 1563)
Compressive strength (ISO 1563)
C302086
C302111
0:45 min
1:35 min
1:00 min
2:35 min
99 %
11.5 %
1.4 MPa
1 bag, 453 g
1 single dose sachet, 18 g
Equipment
C303230
C303215
C303231
Alghamix II - mechanical mixer for alginates, plasters and silicones 230V + mixing cup and spatula for alginates
Alghamix II - mechanical mixer for alginates, plasters and silicones 115V + mixing cup and spatula for alginates
Alghamix II - mechanical mixer for alginates, plasters and silicones 230V + mixing cup and spatula for alginates + UK plug
Accessories
C300910
C300992
C300990
C300960
Set of measures for alginate (1 measure water + 1 measure powder)
1 rubber mixing bowl
Fluo coloured mixing spatulas for alginates (x6)
Long Life Bags (x100)(hermetic bags for impression storage)
algitray
86
Packaging
Technical data - algitray Powder
Technical data - algitray Liquid
Powder / LiquidSpecial neutral pH cleansing agent for alginates
“Long Life System” Alginates - Detergent
Disinfecting agent
Diluition
Action time
C400430
C400431
Ammonium Oxalate
50 g powder / 500 ml water
15:00 min - 30:00 min
1 tub, 1 kg + measures
1 bottle, 2 litres
Disinfecting agent
Diluition
Action time
Ammonium Oxalate
Ready to use
15:00 min - 30:00 min
• Highly effective ecological formulation, which permits the removal of every trace of alginate from trays and other instruments
• Harmless to metals due to its neutral pH. Phosphate-free
ADVANTAGES
POWDER • Concentrated powder to be diluted to
obtain 10 litres of solution • Yellow colours • Mint aroma
LIQUID • Ready to use liquid solution • Yellow colour • Mint aroma
CHARACTERISTICS
• Alginate debris cleansing and removal from all types of trays
USE
87
Packaging
AccessoriesAlginatos “Long Life System”
C300992
C300910
C300990
C300900
C300960
1 rubber mixing bowl, medium size, 115 mm
Set of measures for alginate (1 water + 1 powder)
Fluo coloured mixing spatulas for alginates (x6)
Set of measures for hydrogum® 5 and hydrocolor 5 (1 water + 1 powder)
Long Life Bags (x100) (hermetic bags for impression storage)
Set of measures for alginate
(water + powder)
Fluo coloured mixing spatulas
for alginates
Rubber mixing bowl
Set of measures for hydrogum® 5 and hydrocolor 5
(water + powder)
Trays hi-tray metal
hi-tray light clear
hi-tray light plastic
hi-tray light edentulous
hi-tray light dual arch
90
91
92
93
94
hi-tray metal
90
Packaging
Trays
Special BSA stainless steel trays with 16.70% chrome
Single Packs: Solid
SIZE
UPPER
LOWER
Single Packs: Perforated
SIZE
UPPER
LOWER
D5K10S
D5K10P
D5K08S
D5K08P
1
D51SS
D51IS
1
D51SP
D51IP
D5K06S
D5K06P
Solid
Perforated
Solid
Perforated
Solid
Perforated
Kit Packs: 1 kit, 10 upper and lower trays each
Kit Packs: 1 kit, 8 upper and lower trays each
Kit Packs: 1 kit, 6 upper and lower trays each
2
D52SS
D52IS
2
D52SP
D52IP
3
D53SS
D53IS
3
D53SP
D53IP
4
D54SS
D54IS
4
D54SP
D54IP
5
D55SS
D55IS
5
D55SP
D55IP
• High deformation strength• Greater precision of the impression• Designed for perfect mechnical retention
of the material to the impression tray• Soldering point accuracy• Durability
ADVANTAGES
• Can be sterilized in a cold solution or in autoclave
• Available in two versions: solid and perforated
CHARACTERISTICS
• Impression tray for standard applications
USE
Lower Perforated Lower Solid
Upper Perforated Upper Solid
hi-tray light clear
91
Packaging
Trays
The impression tray in clear rigid plastic
Standard Packs: hi-tray light clear x12
SIZE
UPPER
LOWER
LEFT
RIGHT
Small
D5CSUP
D5CSLO
-
-
Medium
D5CMUP
D5CMLO
-
-
Large
D5CLUP
D5CLLO
-
-
Partial
D5CPUP
-
D5CPL
D5CPR
• Clear material• Very rigid design prevents deformations• Disposable• Adaptable• Autoclavable • Perforated design for improved
mechanical retention • Reinforced grip with ribbing for easy
handling during removal from the mouth
ADVANTAGES
• Made in clear rigid plastic to avoid distortion
• Available in the following versions: small (upper and lower) medium (upper and lower) large (upper and lower) partial (upper, right and left)
CHARACTERISTICS
• Impression tray for standard applications
USE
hi-tray light plastic
92
Packaging
Trays
The impression tray in grey rigid plastic
• Disposable• Adaptable• Very rigid design prevents deformations• Perforated design for improved
mechanical retention • Reinforced grip with ribbing for easy
handling during removal from the mouth
ADVANTAGES
• Available in the following versions: small (upper and lower) medium (upper and lower) large (upper and lower) partial (upper, right and left)
CHARACTERISTICS
• Impression tray for standard applications
USE
Standard Packs : hi-tray light plastic x12
SIZE
UPPER
LOWER
LEFT
RIGHT
Small
D5GSUP
D5GSLO
-
-
Medium
D5GMUP
D5GMLO
-
-
Large
D5GLUP
D5GLLO
-
-
Partial
D5GPUP
-
D5GPL
D5GPR
LowerUpper
hi-tray light edentulous
93
Packaging
Trays
Anatomic impression tray in green rigid plastic
Standard Packs : hi-tray light edentulous x12
SIZE
UPPER
LOWER
LEFT
RIGHT
Small
D5ESUP
D5ESLO
-
-
Medium
D5EMUP
D5EMLO
-
-
Large
D5ELUP
D5ELLO
-
-
• Disposable• Perforated design for improved
mechanical retention • Reinforced grip with ribbing for easy
handling during removal from the mouth • Rigid design prevents deformations• Adaptable
ADVANTAGES
• Made in green rigid plastic• Available in the following versions: small (upper and lower) medium (upper and lower) large (upper and lower)
CHARACTERISTICS
• Impression tray for edentulous arches
USE
LowerUpper
hi-tray light dual arch
94
Trays
Plastic impression tray for the dual-arch (triple tray) technique
• The support webbing lets silicone through to form a single body between the upper and lower impressions
• The support webbing is imperceptible to the patient, thus avoiding alterations to occlusion during impression taking
• Clear plastic lets you view the correct position of the impression tray on the preparation
ADVANTAGES
• Tray with plastic handle and rim with a plastic webbing for the contact areas
• Available in 5 types: - Anterior - Full Arch - Quadrant - Posterior - Posterior sideless• Single use
CHARACTERISTICS
• Fixed prostheses impressions• Recommended with the single-stage dual
arch (simultaneous) filling of impression trays, in combination with Colorise Rigid impression A-silicone
USE
Packaging
D5DANT
D5DFUL
D5DPLE
D5DPOS
D5DQUA
hi-tray light dual arch Anterior (x30)
hi-tray light dual arch Full arch (x30)
hi-tray light dual arch Posterior sideless (x48)
hi-tray light dual arch Posterior (x48)
hi-tray light dual arch Quadrant (x40)
Relining materials and resins for temporary c&b
elite® soft relining
elite® super soft relining
elite® hard relining
96
97
98
elite® soft relining
96
Technical data
Packaging
Accessories
Relining materials and resins for temporary c&b
Special A-Silicone for permanent soft relining
Total working time (23°C/73°F)
Trimming time (direct method)
Time in mouth (direct method)
Dimensional stability (after 24 h)
Elastic recovery
Hardness (Shore A)
C700100
1:00 min
1:00 min
5:00 min
< 0.20 %
99.9 %
35
Standard Pack:1 cartridge, 50 ml + 6 mixing tips small/yellow+ 1 Primer, 4 ml + 1 Varnish A, 5 ml + 1 Varnish B, 5 ml + 1 finishing bur1 mixing plate + 1 brush handle+ 12 brushes
• Water repellent• Does not absorb fluids • Elastic memory to make the prostheses
more stable • Elastic: it permits masticatory load
absorption• Suitable for direct use in the surgery and
for indirect use in the laboratory• Stable, constant characteristics• Chair time saving and immediate comfort
for the patient
ADVANTAGES
• 1:1 Mixing ratio • Biocompatible • Excellent bonding to prosthetic base with
Zhermack elite® relining primer special adhesive
• For permanent relining, use the special Zhermack varnish A+B on the margins in contact with the rigid resin
• Ideal consistency • Pink colour
CHARACTERISTICS
• Complete, partial or rehabilitation prostheses
• Particularly indicated for direct application in the surgery as well as in the laboratory
USE
C700130 Refill:
1 cartridge, 50 ml
+ 6 mixing tips small/yellow
1 bottle, Primer 4 ml
1 Varnish A, 5 ml + 1 Varnish B, 5 ml
Mixing tips small/yellow (x48)
D2 Dispenser -1:1
C700140
C700150
C202070
C202100
elite® super soft relining
97
Technical data
Packaging Accessories
Reference
Relining materials and resins for temporary c&b
Special A-Silicone for temporary soft relining
Total working time (23°C/73°F)
Trimming time (direct method)
Time in mouth (direct method)
Dimensional stability (after 24 h)
Elastic recovery
Hardness (Shore A)
C700110
C700120
Standard Pack: 1 cartridge, 50 ml + 6 mixing tips small/yellow + 1 Primer, 4 ml + 1 finishing bur
Refill: 1 cartridge, 50 ml
+ 6 mixing tips small/yellow
C700140
C202070
C202100
1 bottle, Primer 4 ml
Mixing tips small/yellow (x48)
D2 Dispenser -1:1
• Water repellent• Does not absorb fluids • Elastic memory to make the prostheses
more stable • Elastic: it permits masticatory load
absorption• Suitable for direct use in the surgery and
for indirect use in the laboratory• Stable, constant characteristics• Chair time saving and immediate comfort
for the patient
ADVANTAGES
• 1:1 Mixing ratio • Biocompatible • Excellent bonding to prosthetic base with
Zhermack elite® relining primer special adhesive
• For permanent relining, use the special Zhermack varnish A+B on the margins in contact with the rigid resin
• Ideal consistency • Translucent pink colour
CHARACTERISTICS
• Complete, partial or rehabilitation prostheses
• Implantology• Particularly indicated for direct
application in the surgery
USE
Experimental Protocol: evaluation of the microbial contamination of conditionedmaterials. S. Santi, S. Bortolini, A. Natali, E. Blasi, U. Consolo. University of Modena and Reggio Emilia.
1:00 min
1:00 min
5:00 min
< 0.20 %
99.9 %
15
elite® hard relining
98
Packaging
Technical data
Relining materials and resins for temporary c&b
Direct relining hard resin. Self-curing
Powder/liquid mixing ratio
Curing time
Flexure strength
Water absorpion
Water solubility
C710080
2.2 g / 1.4 ml
10:00 min
31 MPa
12.5 μg/mm3
0.9 μg/mm3
1 Powder 60 g + 1 Liquid 40 ml + 1 Primer 10 ml
• Perfectly tolerated by the patient • Develops very low temperatures during
polymerization• The colour does not interfere with the
existing prosthetic base
ADVANTAGES
• Easy and fast working• Formulation free from conventional
monomers. Methacrylate-free• Odourless and tasteless • Pink colour
CHARACTERISTICS
• Direct complete or partial hard relining in the surgery
USE
Silicones for aesthetic restoration and composite for
crowns and bridges elite® glass
acrytemp
100
101
elite® glass
100
Silicones for aesthetic restoration and composite for crowns and bridges
Medium bodied CLEAR Addition silicone. Used for making a clear matrix, which can be light-cured through when preparing veneers
• The new formulation of elite® glass has been designed to create completely transparent moulds, allowing a variety of cosmetic dental problems to be resolved quickly with excellent aesthetic results
• The use of elite® glass significantly reduces the non-polymerised surface layer of the composites due to the inhibition by oxygen
ADVANTAGES
• Clear, allows the polymerisation of light-curing and self-curing composites
• Thixotropic• Hard after setting (70 Shore A)• Accurate• Dimensionally stable over time and to
disinfection• Easy to reposition in the mouth after
setting• It can be finished after setting with a
cutting blade or bur
CHARACTERISTICS
• Creation of clear moulds directly in the mouth of the patient for the subsequent application and polymerisation of light-curing materials
• Can be used in a variety of clinical situations that require enamel shaping work for cosmetic treatments: pigmentations, closing diastemas, correction of dental rotations, crown fractures, morphological dental anomalies, creation of temporary crowns, etc.)
USE
Packaging
Technical data
Accessories
Colour
Mixing ratio Base:Catalyst
Working time (23°C/73°F)
Setting time (35°C/95°F)
Reproduction of details
Dimensional stability (after 24 h)
Hardness (Shore A)
C401610
C401611
Clear
1:1
0:40 min
2:10 min
2 μm
- 0.18 %
70
2 cartridges (Base + Catalyst) 50 ml each+ 6 Mixing tips medium/green
Intro Kit: 1 cartridge (Base+Catalyst) 50 ml + 3 Mixing tips medium/green + 1 partial upper hi-tray light clear
C202080
C202095
C202100
D5CPUP
Mixing tips medium/green (x48)
Bite tips (x48)
D2 Dispenser -1:1
Partial upper impression trays (x12)
acrytemp
101
Technical data
Accessories
Silicones for aesthetic restoration and composite for crowns and bridges
Bisacrylic self-curing composite resin for temporary C&B preparation
C700230
C700240
D2 Dispenser - 4:1Mixing tips - 4:1 (x45)
• Practical: the cartridge selfmixing system permits optimal dispensing
• Functional: it develops very low temperatures during polymerization
• Die protection• Respect of tooth-periodontal relation• Tooth position preservation• Resistant to occlusal and removal forces
in masticatory cycles• Possibility of variation in shape and
profile• Possibility of aesthetic characterization• Repairable
ADVANTAGES
• Self-mixing system in 4:1 cartridge• Monomer-free, multifunctional
methacrylic ester formulation• Can be relined• Can be polished• Available in four stable, brilliant shades
CHARACTERISTICS
• Direct preparation in the surgery of temporary C&B
USE
Packaging
C700200
C700215
C700205
A2 shade:1 cartridge, 50ml (76g) +15 mixing tips - 4:1
A3 shade:1 cartridge, 50ml (76g) +15 mixing tips - 4:1
A3.5 shade:1 cartridge, 50ml (76g) +15 mixing tips - 4:1
Working time
Elastic phase from application
Setting time
Compressive strength (after 24 h)
Breaking strength (after 24 h)
Flexure stength (after 24 h)
1:00 min
1:15 min - 2:10 min
2:10 min - 3:30 min
290 MPa
48 MPa
60 MPa
Glovessafemix latex
safemix nitrile
104
105
safemix latex
104
Gloves
Powder-free latex gloves tested for the safe mixing of A-silicones impression materials
• Does not prevent the polymerisation of A-silicones
• Micro-rough surface for better handling and sensitivity to touch
• Hypoallergenic. Reduced protein content (< 50 μg/g)
• Controlled safety (AQL 1.5) according to the ASTM standard
ADVANTAGES
• Powder free• Disposable• Ambidextrous• Nonsterile• Reinforced cuff
CHARACTERISTICS
• Powder-free latex glove tested for the safe mixing of A-silicones impression materials
USE
D600000
D600010
D600020
D600030
D600040
XS (x100)
S (x100)
M (x100)
L (x100)
XL (x100)
Packaging
safemix nitrile
105
Gloves
Powder-free synthetic nitrile gloves tested for the safe mixing of A-silicones impression materials. Minimising the risk of allergies
• Does not prevent the polymerisation of A-silicones
• Micro-rough surface for better grip on tools and extreme sensitivity to touch
• Good mechanical strength, higher than disposable latex/vinyl gloves
• Highly biocompatible (no latex protein)• Controlled safety (AQL 1.5) according to
the ASTM standard
ADVANTAGES
• Powder free• Disposable• Ambidextrous• Nonsterile• Reinforced cuff
CHARACTERISTICS
• Powder-free synthetic nitrile glove tested for the safe mixing of A-silicones impression materials. Minimising the risk of allergies
USE
D601000
D601010
D601020
D601030
D601040
XS (x100)
S (x100)
M (x100)
L (x100)
XL (x100)
Packaging
Disinfection and Sterilisation zeta 1 Ultra
zeta 2 Sporex
zeta 2 Enzyme
zeta 3 Ultra
zeta 3 Soft
zeta 3 Foam
zeta 3 Wipes
zeta 4 Wash
zeta 5 Unit
zeta 6 Hydra
zeta 6 Drygel
zeta 7 Solution
zeta 7 Spray
109
110
111
112
113
114
115
116
117
118
119
120
121
zeta 1 Ultra
109
Disinfection and Sterilisation
Aldehyde-free concentrated full spectrum Disinfection and sterilisation
• Bactericidal: EN 13727, EN 14561 (S. aureus, P. aeruginosa, E. hirae)
• Fungicidal: EN 13624, EN 14562 (C. albicans, A. niger)
• Mycobactericidal, tubercolicidal: EN 14348, EN 14563 (M. terrae, M. avium)
• Virucidal activity tested according to EN14476 (Adenovirus, Poliovirus, Enterovirus, Herpesviridae, HBV, HCV, HDV, HIV,H1N1, H5N1)
SPECTRUM
• 100g of Zeta 1 Ultra contains: - 18g of 3-aminopropyl-dodecyl - 1.3-propanediamine - 15g of alkyl - benzyl-dimethyl ammonium chloride
ACTIVE INGREDIENTS
• Once prepared, the solution remains stable for up to one week, but if used to disinfect a large number of instruments or instruments that are heavily contaminated with blood, saliva or organic tissue, the solution should be changed more frequently
• For particularly hard waters increase the dose of zeta 1 ultra until a clear solution is obtained. Any slight difference in the perfume is due to the presence of natural fragrances and does not jeopardise quality of the product
RECOMMENDATIONS
• 1% solution: add 10 ml of Zeta 1 to each litre of water at room temperature using the practical dispenser cap
• One litre of Z1 Ultra gives 100 litres of disinfectant solution
• Immerse the instruments in the bath: - For 15 minutes to achieve the following
actions: Bactericidal (EN13727), Fungicidal (EN13624 and EN14562, Candida albicans) Tubercolicidal (EN14348, EN14563) Complete micobactericidal (EN14348) Complete virucidal (EN14476, “clean” conditions)
- For 60 minutes to achieve the following actions: Bactericidal (EN14561), Complete fungicidal (EN13624 and EN14562, including Aspergyllus niger), Micobactericidal (EN14563), Complete virucidal (EN14476, “dirty” conditions)
• Ultrasound - 1% solution: The use of ultrasonic equipment at 30°C reduces contact time by 10 minutes
USE
• ZETA 1 ULTRA is an aldehyde-free concentrated full spectrum Disinfection and sterilisation , developed and tested according to the latest harmonised European disinfection standards
• ZETA 1 ULTRA is specially formulated for the high-level disinfection of surgical and rotating dental instruments, including the most delicate (scalpels, pliers, tweezers, burs, mirrors, probes, etc.)
APPLICATIONS
Accessories
Packaging
C800090
C800092
C810070
1 litre sterilization bath
3 litres sterilization bath
Zeta Hygiene Nozzle - Dosage cap for 3 and 5 litres container
C810002
C810000
C810001
125 ml bottle
1 litre bottle
5 litres container with dosage cap
zeta 2 Sporex
110
Disinfection and Sterilisation
Full spectrum disinfectant and sterilising agent in powder form
• Battericidal: EN 13727, EN 14561 (S. aureus, P. aeruginosa, E. hirae)
• Fungicidal: EN 13624, EN 14562 (C. albicans, A. niger)
• Mycobactericidal, tubercolicidal: EN 14348, EN 14563 (M. terrae, M. avium)
• Virucidal including HIV, HBV, HCV: EN 14476 (Poliovirus, Adenovirus, Parvovirus)
• Sporicidal EN 13704 (B. cereus)
SPECTRUM
> 40% oxygen-based whitener > 30% activator• The active ingredient peracetic acid develops
as the powder dissolves in water
ACTIVE INGREDIENTS
• Once prepared, the solution remains stable for at least 24 hours. It should nevertheless be replaced at the start of each working day
• Important: the undissolved powder remaining on the bottom guarantees the biocide effectiveness of the solution for its entire duration in accordance with the instruction of use
RECOMMENDATIONS
• 2% solution: add 20g (3 dosing scoops) of ZETA 2 SPOREX for each litre of water. When diluted it gives 45 litres of sterilising solution
• At a water temperature of 20°C, the solution performs its sporicidal and high-level disinfectant action in 10 minutes as suggested in the instruction for use of the product
USE
• ZETA 2 SPOREX is specially formulated for the high-level disinfection and cold chemical sterilisation of dental instruments (scalpels, pliers, tweezers, burs, mirrors, probes, etc), and of all devices that can not be sterilised in an autoclave (e.g. endoscopes, fibre optics, rubber and plastic instruments, etc.)
APPLICATIONS
Accessories
Packaging
C800090
C800092
C810011
1 litre sterilization bath
3 litres sterilization bath
900 g container with dosing spoon
zeta 2 Enzyme
111
Disinfection and Sterilisation
Full spectrum detergent and disinfection powder
Accessories
Packaging
C800090
C800092
C810012
1 litre sterilization bath
3 litres sterilization bath
1.2 kg container with dosing spoon
• Bactericidal: EN 13727, EN 14561 (S. aureus, P. aeruginosa, E. hirae)
• Fungicidal: EN 13624, EN 14562 (C. albicans, A. niger)
• Mycobactericidal, tubercolicidal: EN 14348, EN 14563 (M. terrae, M. avium)
• Virucidal activity tested according to EN14476 (Poliovirus, Parvovirus, Adenovirus, Enterovirus, Herpesviridae, HBV, HCV, HDV, HIV)
SPECTRUM
> 25% oxygen-based whitener > 18% activator• The active ingredient peracetic acid develops
as the powder dissolves in water
ACTIVE INGREDIENTS
• Once prepared, the solution remains stable for at least 8 hours. It should nevertheless be changed at the start of each working day
• If used to disinfect a large number of instruments or instruments that are heavily contaminated with blood, saliva or organic tissue, the solution should be changed more frequently
• Important: the undissolved powder remaining on the bottom guarantees the biocide effectiveness of the solution for its entire duration in accordance with the instruction of use
RECOMMENDATIONS
• 2% solution: add 20g (2 dosing spoons) of ZETA 2 ENZYME to each litre of water. One pack of ZETA 2 ENZYME gives 60 litres of disinfectant solution. If water temperature is 20°C, wait 15 minutes to allow sufficient active oxygen to be developed, then immerse the medical instruments and devices in the bath and disinfect for 10 minutes. If necessary,remove stubborn dirt with a brush. Rinse the disinfected instruments under running water
• Dry the instruments off then sterilise them in an autoclave or by cold chemical sterilisation with ZETA 2 SPOREX
USE
• ZETA 2 ENZYME is specially formulated for high-level disinfection of dental instruments (scalpels, pliers, tweezers, burs, mirrors, probes, etc.) prior to autoclaving or cold chemical sterilisation
APPLICATIONS
zeta 3 Ultra
112
Aldehyde-free, ready-to-use full spectrum disinfectant
Disinfection and Sterilisation
• Battericidal: EN 13727, EN 14561 (S. aureus, P. aeruginosa, E. hirae)
• Fungicidal: EN 13624, EN 14562 (C. albicans, A. niger)
• Mycobactericidal, tubercolicidal: EN 14348, EN 14563 (M. terrae, M. avium)
• Virucidal, including HIV, HBV, HCV, H1N1, H5N1: EN 14476 (Poliovirus, Adenovirus)
SPECTRUM
• 100g of ZETA 3 ULTRA contains - 35.4g of ethanol - 35g of isopropanol - and 0.7g of dimethyl-didecyl-
ammonium chloride
ACTIVE INGREDIENTS
• The product is not suitable for use on alcohol-sensitive materials. Before applying, check the compatibility of surfaces treated with alcohol-base products. For these surfaces use Zeta 3 Foam instead
RECOMMENDATIONS
• Spray ZETA 3 ULTRA over the surfaces and objects to be disinfected to form a continuous film
• Leave to work for at least 1 minute, then clean the surfaces/devices with a tissue and dry them off
• Alternatively, you can spray ZETA 3 ULTRA on a tissue to wipe over the surfaces or devices
USE
• ZETA 3 ULTRA is specially formulated for the rapid, high-level disinfection of the surfaces of medical equipment (handpieces, shelves, contra-angles, instrument trays, film holders, light handles, dental units’basins, etc.)* between one patient and another
*Before applying, check the compatibility of surfaces treated with alcohol-base products
APPLICATIONS
Marine Fragrance
Accessories
Packaging
C810070 Zeta Hygiene Nozzle - Dosage cap for 3 and 5 litres container
C810030
C810021
C810022
125 ml bottle
750 ml bottle with spray nozzle cap
3 litres container with dosage cap
zeta 3 Soft
113
Aldehyde-free, broad spectrum, ready-to-use disinfectant
Disinfection and Sterilisation
• Bactericidal: EN 13727, EN 14561 (S. aureus, P. aeruginosa, E. hirae)
• Fungicidal: EN 13624, EN 14562 (C. albicans, A. niger)
• Tubercolicidal: EN 14348, EN 14563 (M. terrae)
• Virucidal, including HIV, HBV, HCV, H1N1, H5N1: EN 14476 (Poliovirus, Adenovirus, Parvovirus)
SPECTRUM
• 100g of Zeta 3 Soft contains: - 34.4g of ethanol - 14g of isopropanol
ACTIVE INGREDIENTS
• The product is not suitable for use on alcohol-sensitive materials. Before applying, check the compatibility of surfaces treated with alcohol-base products. For these surfaces use ZETA 3 FOAM instead
RECOMMENDATIONS
• Spray Zeta 3 Soft over the surfaces and objects to be disinfected to form a continuous film
• Leave to work for at least 1 minute, then clean the surfaces/devices with a tissue and dry them off
• Alternatively, you can spray Zeta 3 Soft on to a tissue and wipe over the surfaces or devices to be disinfected
USE
• ZETA 3 SOFT is specially formulated for the rapid, high-level rapid disinfection of medical device surfaces (handpieces, shelves, dental units*, contra-angles, instrument trays, film holders, light handles, dental units’ basins, etc.)** between one patient and another
• Its special, quat-free, low isopropanol formula ensures ZETA 3 SOFT is only slightly aggressive to the airways and does not cause drowsiness
*Do not treat delicate or alcohol-sensitive surfaces (made of leather or synthetic material) before checking its compatibility with alcohol-base products
**Before applying, check the compatibility of surfaces treated with alcohol-base products
APPLICATIONS
Packaging
Lemon fragrance
Classic fragrance
Accessories
C810070 Zeta Hygiene Nozzle - Dosage cap for 3 and 5 litres container
125 ml bottle
750 ml bottle with spray nozzle cap
2 x 2,5l container with dosage cap
Zeta 3 classic - 125 ml bottle
Zeta 3 classic - 750 ml bottle with nozzle trigger spray
Zeta 3 classic - 2 x 2,5l container with dosage cap
C810029
C810023
C810024
C810032
C810027
C810028
zeta 3 Foam
114
Disinfection and Sterilisation
Aldehyde-free, broad spectrum, ready-to-use disinfectant detergent
• Bactericidal: EN 13727, EN 14561 (S. aureus, P. aeruginosa, E. hirae)
• Fungicidal: EN 13624, EN 14562 (C. albicans, A. niger)
• Tuberculicidal: EN 14348, EN 14563 (M. terrae)
• Virucidal, including HIV, HBV, HCV: EN 14476 (Poliovirus,Adenovirus, Parvovirus)
SPECTRUM
• 100g of Zeta 3 Foam contains: - 0.315g dimethyl-didecyl-ammonium
chloride, - 0.075g alkyl-benzyl-dimethyl
ammonium chloride
ACTIVE INGREDIENTS
• Zeta 3 Foam is recommended for the disinfection of delicate surfaces that are sensitive to chemical attack by alcohol-based solutions
RECOMMENDATIONS
• Spray Zeta 3 Foam over all the surfaces and medical devices to be disinfected. Leave the foam for at least 1 minute, then clean the surfaces/devices with a tissue and dry them off
• Alternatively, you can spray Zeta 3 Foam on to a tissue and wipe over the surfaces or devices to be disinfected
USE
• Because of its excellent compatibility with all materials, Zeta 3 Foam is especially recommended for disinfecting delicate surfaces
• Zeta 3 Foam is specially formulated for rapid, high-level disinfection of surfaces and medical devices (handpieces, shelves, dental units, contra-angles, instrument trays, film holders, light handles, dental units’ basins, etc.) between one patient and the next
APPLICATIONS
Lemon fragrance
Accessories
Packaging
C810070 Zeta Hygiene Nozzle - Dosage cap for 3 and 5 litres container
C810025
C810026
750 ml bottle with foam distributor nozzle
3 litres container with dosage cap
zeta 3 Wipes
115
Aldehyde-free broad spectrum biocidal disinfectant wipes
Disinfection and Sterilisation
• Battericidal, in agreement to the new norms DGHM/VAH 09/2001
• Fungicidal, in agreement to the new norms DGHM/VAH 09/2001
• Tubercolicidal• Virucidal, including HIV, HBV, HCV,
H1N1, H5N1 Adenovirus, Rotavirus, Norovirus
SPECTRUM
• 42 g of ethanol• 0,05g of didecyl dimethyl ammonium
chloride• Each box or refill pack of Zeta 3 Wipes
contains 120 wipes saturated with 210g of disinfectant solution
ACTIVE INGREDIENTS
• The product is not suitable for use on alcohol-sensitive materials. Before applying, check the compatibility of surfaces treated with alcohol-base products
RECOMMENDATIONS
• Open the Zeta 3 Wipes refill pack and pull out a wipe to half its length. Pass the end of the wipe through the slot in the cover and close the box
• Wipe the device or surface to be disinfected with a Zeta 3 WIPES. Leave to work for at least one minute before drying
USE
• Zeta 3 Wipes are ideal for the rapid, highlevel disinfection and cleaning of medical devices and surfaces (handpieces, shelves, dental units, contra-angles, instrument trays, film holders, light handles, dental units’basins, etc.) between one patient and another
• The formula used in Zeta 3 Wipes has been dermatologically tested
APPLICATIONS
Packaging
C810060
C810061
1 refi ll bag, 120 wipes each
1 tub, 120 wipes each
Lemon fragrance
zeta 4 Wash
116
Deterges and deodorises all washable surfaces such as washbasins, baths, tiles and floors, in hospitals, clinics, dental surgeries and dental laboratories
Disinfection and Sterilisation
• 1-2 dosage cap of Zeta 4 Wash to every litre of water. For cleaning ingrained dirt, use a few drops of the concentrated solution on a damp cloth.For cleaning ingrained dirt, use a few drops of the concentrated solution on a damp cloth
USE
• Zeta 4 Wash contains a cationic and nonionic, surfactant-based agent that cleans deeply without damaging materials like rubber, wood, porcelain, ceramic, enamel and metal
• Zeta 4 Wash is over 90% biodegradable, non-foaming and fermentation-inhibiting
APPLICATIONS
Accessories
Packaging
C810070
C810037
Zeta Hygiene Nozzle - Dosage cap for 3 and 5 litres container
3 litres container
Green Tea Fragrance
zeta 5 Unit
117
• Battericidal• Fungicidal• Tubercolicidal• Virucidal (Adenovirus, Enterovirus,
Herpesviridae, HBV, HCV, HDV, HIV)
SPECTRUM
• O-phenyl phenol iodine salt
ACTIVE INGREDIENTS
• Concentrated liquid disinfectant for deterging, deodorising and disinfecting surgical aspirators
RECOMMENDATIONS
• 5% solution: 4 dosage caps (Zeta 5 Unit) for every litre of water
• Aspirate the prepared solution through the air and solution hoses to detach any residues adhering to the internal walls of the hoses.
• In dental units with collecting tanks, leave to react for 24 hours. Can also be used with rinsing basins (spittoons)
• 1x5 litre container (Zeta 5 Unit) = 100 litres of solution
USE
• Zeta 5 Unit has a non-aggressive action on aspirator components and tubing. Used daily it prevents the formation of biofilms
APPLICATIONS
Accessories
Packaging
C800090
C800092
C810070
C800061
1 litre sterilization bath
3 litres sterilization bath
Zeta Hygiene Nozzle - Dosage cap for 3 and 5 litres container
5 litres container
Non-foaming, concentrated, aldehyde-free detergent, deodorant and disinfectant specially formulated for aspiration circuits
Disinfection and Sterilisation
zeta 6 Hydra
118
• Zeta 6 Hydra’s special formula also makes it ideal for washing the face and body
RECOMMENDATIONS
• Wet your hands and deposit one dose of Zeta 6 Hydra on the palm of one hand, then rub the product thoroughly over your hands before rinsing and drying
USE
• Zeta 6 Hydra contains a mixture of hydrating vegetable substances:
- nutrients like hydrolised rice protein - protective agents like glyceryl oleate, for
maintaining the lipid structure of the surface layers of the skin
- hydrating agents like glycerine for cleansing the skin without causing dryness or irritation
• Zeta 6 Hydra does not contain the sodium lauryl ether sulphate (SLES) and parabenes found in conventional soap. The delicate surfactants in ZETA 6 HYDRA respect the skin and help preventing irritation
APPLICATIONSUltra-delicate cosmetic liquid for freqent hand washing, specially formulated for delicate skin
Disinfection and Sterilisation
Accessories
Packaging
C810070 Zeta Hygiene Nozzle - Dosage cap for 3 and 5 litres container
C810044
C810042
C810043
125 ml bottle
1 litre bottle with dosage cap
5 litres container with dosage cap
zeta 6 Drygel
119
• Zeta 6 drygel is a practical solution whenever thorough hand-cleaning and sanitizing are required at the same time, without the need for soap and water
• Recommended in the working environment, before and after each patient and to remove unpleasant odours from hands
RECOMMENDATIONS
• Pour a sufficient quantity of the product directly onto the hands and rub for at least 30 seconds. Leave to dry, without rinsing
USE
• Zeta 6 drygel, enriched with Vitamin E and Glyceryl Oleate, skin-protecting substances which prevent skin ageing leaves hands soft, has a pleasant fragrance and needs no rinsing
APPLICATIONS
Packaging
C810047
C810045
C810046
1 bottle, 80 ml
1 bottle, 500 ml
1 bottle, 1000 ml
Detergent with a deep cleaning and sanitizing action
Disinfection and Sterilisation
80 ml
500 / 1000 ml
zeta 7 Solution
120
• Bactericidal: EN 13727 (S. aureus, P. aeruginosa, E. hirae)
• Fungicidal: EN 13624 (C. albicans)• Tubercolicidal: EN 14348, EN 14563
(M. terrae)• Virucidal, including HIV, HBV, HCV: EN
14476 (Poliovirus, Adenovirus, Parvovirus)
SPECTRUM
• 100g of Zeta 7 Solution contains: - 7.7g of dimethyl-didecyl-ammonium
chloride - 15g of phenoxyethanol
ACTIVE INGREDIENTS
• Follow the recommended immersion times• Replace the solution frequently, especially
in presence of high levels of organic contamination (blood, saliva)
RECOMMENDATIONS
• 1% solution: Immediately after taking the impression, rinse under running water for 30 seconds
• Immerse the impression in a 1% solution of Zeta 7 Solution for 10 minutes. Add 10 ml of Zeta 7 Solution to each litre of water using the practical dispenser cap
• Remove the impression from the bath and rinse it thoroughly
• 1 litre of Zeta 7 Solution = 100 litres of disinfectant solution
USE
• Zeta 7 solution is specially formulated for the rapid, high-level disinfection of impressions in silicone, alginate, polyether and polysulphur
• It does not alter the impressions or change their shape or size, and is fully compatible with plasters
APPLICATIONSAldehyde-free, concentrated, broad spectrum disinfectant
Disinfection and Sterilisation
Lemon fragrance
Accessories
Packaging
C800090
C800092
C810070
1 litre sterilization bath
3 litres sterilization bath
Zeta Hygiene Nozzle - Dosage cap for 3 and 5 litres container
C810052
C810048
C810049
125 ml bottle
1 Litres bottle
5 litres container with dosage cap
zeta 7 Spray
121
• Bactericidal: EN 13727 (S. aureus, P. aeruginosa, E. hirae)
• Fungicidal: EN 13624 (C. albicans)• Tubercolicidal: EN 14348, EN 14563
(M. terrae)• Virucidal, including HIV, HBV, HCV:
EN 14476 (Poliovirus, Adenovirus, Parvovirus)
SPECTRUM
• 100g of Zeta 7 Spray contains: - 83g of ethanol - 10g of 2-isopropanol
ACTIVE INGREDIENTS
• Avoid contact of Zeta 7 Spray with alcohol-sensitive materials
RECOMMENDATIONS
• Immediately after taking the impression, rinse under running water for 30 seconds
• Spray Zeta 7 Spray all over the surface of the impression. Leave the product to evaporate for 3 minutes
USE
• Zeta 7 Solution is specially formulated for the rapid, high-level disinfection of impressions in silicone, alginate, polyether and polysulphur. Zeta 7 Solution does not affect dimensional stability and is fully compatible with plasters
• Zeta 7 Spray improves the flow of plaster /dental stone over impression surfaces, reducing the formation of bubbles and improving the reproduction of detail
APPLICATIONSReady to use, aldehyde-free, broad spectrum disinfectant. Developed and tested according to the latest harmonised European disinfection standards
Disinfection and Sterilisation
Lemon fragrance
Accessories
Packaging
C800090
C800092
C810070
1 litre sterilization bath
3 litres sterilization bath
Zeta Hygiene Nozzle - Dosage cap for 3 and 5 litres container
C810053
C810050
C810051
125 ml bottle
750 ml bottle with foam cap
3 litres container with dosage cap
Dental Stoneselite® master
elite® rock
elite® rock FAST
elite® stone
elite® base
elite® model
elite® model FAST
elite® arti
elite® arti FAST
elite® ortho
Detergentgypstray
accessories
125
126
127
128
129
130
131
132
133
134
135
136
elite® master
125
Accessories
C300992
C300991
C410462
C410461
C419000
C400440
Rubber bowl
Spatula (x1)
Water dispenser
Measuring scoop (100ml)
1 measuring set
GYPSTRAY - ready-to-use neutral pH cleaning agent for removing dental gypsum from spatulas, resin prostheses and articulators - 1 bottle 2l
Technical data Packaging
Desert Sand
Sandy Brown
Soft Grey
200 g 3 Kg1 Kg 25 kgsack
25 kgdrum
Water/powder ratio
Mixing time (manual)
Mixing time (vacuum)
Working time
Setting time (VICAT)
Removal time
Setting expansion 2 hrs
Setting expansion 48 hrs
Compressive strength 1 hr
Compressive strength 48 hr
21 ml / 100 g
1:00 min
0:30 min
12:00 min
14:00 min
45:00 min
0.08 %
0.19 %
50 MPa (510 kg/cm2)
75 MPa (765 kg/cm2)
C410404C410412 C410408
C410403C410411 C410407
C410402C410410C410406
C410401C410409C410405
C410400
Dental Stones
• The resin particles inside the formulation provide high elasticity and splintering resistance for optimal chamfering
• The resin particles reduce water absorption guaranteeing the accuracy of the model
• Operator safety due to a formaldehyde free formula
• All elite® master colours are optimised for detection by all modern laser and optical scanners
• Low expansion, even after 48 hours
ADVANTAGES
• High mechanical characteristics• Compact, marble-like finish• Accurate reproduction of detail • Available in three different colours:
Desert Sand, Sandy Brown, Soft Grey
CHARACTERISTICS
• Production of models and removable dies in fixed prostheses, removable prostheses and implantology
USEType 4 extra hard resin reinforced dental die stone for fixed prostheses and implantology
Equipment
C305120
C305125
elite® mix mixer for gypsums and investments 230V
elite® mix mixer for gypsums and investments 115V
elite® rock
126
Dental Stones
Type 4 extra hard dental die stone for fixed prostheses
• Simplified mixing and balanced thixotropy for easier model production
• High compressive strength • Reduced abrasion and higher precision
of model• The silver grey colour is optimised for
detection by modern laser and optical scanners
• Low expansion, even after 48 hours
ADVANTAGES
• High mechanical characteristics• Thixotropic• Accurate reproduction of detail• Available in five different colours: Sandy
Brown, Light Amber, Silver Grey, Cream and White
CHARACTERISTICS
• Production of models and removable dies in fixed and removable prostheses
USE
Equipment
C305120
C305125
elite® mix mixer for gypsums and investments 230V
elite® mix mixer for gypsums and investments 115V
Technical data Packaging
Sandy Brown
Cream
Silver Grey
Light Amber
White
200 g 3 Kg1 KgWater/powder ratio
Mixing time (manual)
Mixing time (vacuum)
Working time
Setting time (VICAT)
Removal time
Setting expansion 2 hrs
Setting expansion 48 hrs
Compressive strength 1 hr
Compressive strength 48 hr
20 ml / 100 g
1:00 min
0:30 min
12:00 min
14:00 min
45:00 min
0.08 %
0.19 %
52 MPa (530 kg/cm2)
81 MPa (826 kg/cm2)
C410334C410332C410330C410335C410336
C410200C410201C410202C410203C410204
C410030C410020C410010C410035C410000
C410032
C410002
C410033C410025
25 kgsack
25 kgdrum
Accessories
C300992
C300991
C410462
C410461
C419000
C400440
Rubber bowl
Spatula (x1)
Water dispenser
Measuring scoop (100ml)
1 measuring set
GYPSTRAY - ready-to-use neutral pH cleaning agent for removing dental gypsum from spatulas, resin prostheses and articulators - 1 bottle 2l
elite® rock FAST
127
• Fast casting of the model in only 25:00 min maintaining an adequate working time
• Simplified mixing and balanced thixotropy for easier model production
• High compressive strength • Reduced abrasion and higher precision
of model• Low expansion, even after 48 hours
ADVANTAGES
• High mechanical characteristics• Thixotropic• Accurate reproduction of detail• Available in three different colours: Sandy
Brown, Cream, Silver Grey
CHARACTERISTICS
• Fast production of models and removable dies in fixed and removable prostheses
USE
Dental Stones
Type 4 extra hard fast dental die stone for fixed prostheses
Technical data Packaging
Sandy Brown
Cream
Silver Grey
200 g 3 Kg1 KgWater/powder ratio
Mixing time (manual)
Mixing time (vacuum)
Working time
Setting time (VICAT)
Removal time
Setting expansion 2 hrs
Setting expansion 48 hrs
Compressive strength 1 hr
Compressive strength 48 hr
20 ml / 100 g
1:00 min
0:30 min
5:00 min
9:00 min
25:00 min
0.08 %
0.19 %
52 MPa (530 kg/cm2)
81 MPa (826 kg/cm2)
C410337C410339C410338
C410205C410207C410206
C410150C410160C410155
C410151C410152C410162C410157
25 kgsack
25 kgdrum
Accessories
C300992
C300991
C410462
C410461
C419000
C400440
Rubber bowl
Spatula (x1)
Water dispenser
Measuring scoop (100ml)
1 measuring set
GYPSTRAY - ready-to-use neutral pH cleaning agent for removing dental gypsum from spatulas, resin prostheses and articulators - 1 bottle 2l
Equipment
C305120
C305125
elite® mix mixer for gypsums and investments 230V
elite® mix mixer for gypsums and investments 115V
elite® stone
128
Dental Stones
Type 4 dental die stone for models in removable prostheses
• Thixotropic for simplified model production
• Improved compressive strength and resistance to thermal shock
• Low expansion, even after 48 hours
ADVANTAGES
• Thixotropic• Improved mechanical characteristics• Available in four colours: Pink, Navy Blue,
Brown, Aqua Green
CHARACTERISTICS
• Production of models for chromes, removable prostheses and antagonists
USE
Technical data Packaging
Pink
Navy Blue
Brown
Aqua Green
200 g 3 Kg1 KgWater/powder ratio
Mixing time (manual)
Mixing time (vacuum)
Working time
Setting time (VICAT)
Removal time
Setting expansion 2 hrs
Setting expansion 48 hrs
Compressive strength 1 hr
Compressive strength 48 hr
25 ml / 100 g
1:00 min
0:30 min
8:00 min
14:00 min
45:00 min
0.08 %
0.09 %
42 MPa (428 kg/cm2)
60 MPa (612 kg/cm2)
C410315C410310C410312C410313
C410214C410210C410211C410212
C410048C410050C410040C410043
C410055C410042
25 kgsack
25 kgdrum
Accessories
C300992
C300991
C410462
C410461
C419000
C400440
Rubber bowl
Spatula (x1)
Water dispenser
Measuring scoop (100ml)
1 measuring set
GYPSTRAY - ready-to-use neutral pH cleaning agent for removing dental gypsum from spatulas, resin prostheses and articulators - 1 bottle 2l
Equipment
C305120
C305125
elite® mix mixer for gypsums and investments 230V
elite® mix mixer for gypsums and investments 115V
elite® base
129
Type 4 dental stone for bases
Dental Stones
• Optimized expansion for combined use with type 4 stones for dies, in particular with elite® rock, elite® rock fast, elite® master
• Fluidity and perfect casting without vibration
• Optimal compressive strength for an unaltered positioning of the pins inside the base
ADVANTAGES
• High mechanical characteristics• New uniform colours• Available in four colours: Terracotta Red,
Royal Blue, Peach Orange, White, Grey• Optimal fluidity
CHARACTERISTICS
• Production of bases for models in the removable die technique.
USE
Technical data Packaging
Terracotta Red
Royal Blue
Peach Orange
Grey
White
200 g 3 Kg1 KgWater/powder ratio
Mixing time (manual)
Mixing time (vacuum)
Working time
Setting time (VICAT)
Setting expansion 2 hrs
Setting expansion 48 hrs
Compressive strength 1 hr
Compressive strength 48 hr
23 ml / 100 g
1:00 min
0:30 min
5:00 min
18:00 min
0.05 %
0.10 %
40 MPa (408 kg/cm2)
83 MPa (846 kg/cm2)
C410447C410436C410432C410439C410443
C410446C410435C410431C410438C410442
C410448C410437C410433C410440C410444
C410445C410434C410430
C410441
25 kgsack
25 kgdrum
Accessories
C300992
C300991
C410462
C410461
C419000
C400440
Rubber bowl
Spatula (x1)
Water dispenser
Measuring scoop (100ml)
1 measuring set
GYPSTRAY - ready-to-use neutral pH cleaning agent for removing dental gypsum from spatulas, resin prostheses and articulators - 1 bottle 2l
Equipment
C305120
C305125
elite® mix mixer for gypsums and investments 230V
elite® mix mixer for gypsums and investments 115V
elite® model
130
Dental Stones
Type 3 dental stone for antagonists and models in general
• Thixotropic for simplified model production • Extreme versatility due to its superior
characteristics compared to other stones of the same class
• Optimal compressive strength
ADVANTAGES
• Low expansion• High mechanical characteristics• Universal use• Available in three colours: Steel Blue,
Ivory and White
CHARACTERISTICS
• Production of models in general, antagonists and flasking of removable prostheses
USE
Technical data Packaging
Steel Blue
Ivory
White
200 g 3 Kg1 KgWater/powder ratio
Mixing time (manual)
Mixing time (vacuum)
Working time
Setting time (VICAT)
Removal time
Setting expansion 2 hrs
Setting expansion 48 hrs
Compressive strength 1 hr
Compressive strength 48 hr
30 ml / 100 g
1:00 min
0:30 min
7:00 min
12:00 min
45:00 min
0.04 %
0.07 %
31 MPa (316 kg/cm2)
62 MPa (632 kg/cm2)
C410302C410304C410300
C410221C410220C410222
C410070C410080C410060
C410071C410081C410061
C410072C410082
25 kgsack
25 kgdrum
Accessories
C300992
C300991
C410462
C410461
C419000
C400440
Rubber bowl
Spatula (x1)
Water dispenser
Measuring scoop (100ml)
1 measuring set
GYPSTRAY - ready-to-use neutral pH cleaning agent for removing dental gypsum from spatulas, resin prostheses and articulators - 1 bottle 2l
Equipment
C305120
C305125
elite® mix mixer for gypsums and investments 230V
elite® mix mixer for gypsums and investments 115V
elite® model FAST
131
Type 3 fast dental stone for antagonists and models in general
Dental Stones
• Fast casting of the model in only 15:00 min maintaining an adequate working time
• Thixotropic for simplified model production • Extreme versatility due to its superior
characteristics compared to other stones of the same class
• Optimal compressive strength
ADVANTAGES
• Thixotropic• Low expansion• High mechanical characteristics• Universal use• Available in three colours: Sky Blue,
Light Cream, White
CHARACTERISTICS
• Fast production of models in general, antagonists and flasking of removable prostheses
USE
Technical data Packaging
Sky Blue
Light Cream
White
200 g 3 Kg1 KgWater/powder ratio
Mixing time (manual)
Mixing time (vacuum)
Working time
Setting time (VICAT)
Removal time
Setting expansion 2 hrs
Setting expansion 48 hrs
Compressive strength 1 hr
Compressive strength 48 hr
30 ml / 100 g
1:00 min
0:30 min
4:00 min
8:00 min
15:00 min
0.1 %
0.1 %
36 MPa (366 kg/cm2)
65 MPa (662 kg/cm2)
C410306C410308C410309
C410224C410226C410228
C410065C410067C410063
C410066C410068C410064
C410062C410069
25 kgsack
25 kgdrum
Accessories
C300992
C300991
C410462
C410461
C419000
C400440
Rubber bowl
Spatula (x1)
Water dispenser
Measuring scoop (100ml)
1 measuring set
GYPSTRAY - ready-to-use neutral pH cleaning agent for removing dental gypsum from spatulas, resin prostheses and articulators - 1 bottle 2l
Equipment
C305120
C305125
elite® mix mixer for gypsums and investments 230V
elite® mix mixer for gypsums and investments 115V
elite® arti
132
Type 3 articulating dental stone
Dental Stones
• Perfect adhesion, 25% higher than all competitors, to all dental stones, in particular to elite® base, elite® model and elite® stone
• Minimal expansion to maintain the occlusion unaltered
• Thixotropic to simplify the positioning of the articulator
ADVANTAGES
• Thixotropic• Very low expansion• White
CHARACTERISTICS
• Mounting of models for articulation
USE
Technical data Packaging
White
200 g 3 Kg1 KgWater/powder ratio
Mixing time (manual)
Working time
Setting time (VICAT)
Setting expansion 2 hrs
Setting expansion 48 hrs
Compressive strength 1 hr
Compressive strength 48 hr
30 ml / 100 g
1:00 min
3:00 min
5:00 min
0.02 %
0.06 %
26 MPa (265 kg/cm2)
59 MPa (602 kg/cm2)
C410102 C410101 C410100 C410240 C410350
25 kgsack
25 kgdrum
Accessories
C300992
C300991
C410462
C410461
C419000
C400440
Rubber bowl
Spatula (x1)
Water dispenser
Measuring scoop (100ml)
1 measuring set
GYPSTRAY - ready-to-use neutral pH cleaning agent for removing dental gypsum from spatulas, resin prostheses and articulators - 1 bottle 2l
Equipment
C305120
C305125
elite® mix mixer for gypsums and investments 230V
elite® mix mixer for gypsums and investments 115V
elite® arti FAST
133
Type 3 fast setting articulating dental stone
Dental Stones
• Fast setting of models in articulators in only 3 minutes
• Perfect adhesion, 25% higher than all competitors, to all dental stones, in particular to elite® base, elite® model and elite® stone
• Minimal expansion to maintain the occlusion unaltered
• Thixotropic to simplify the positioning of the articulator
ADVANTAGES
• Thixotropic• Very low expansion• White
CHARACTERISTICS
• Fast mounting of models for articulation
USE
Technical data Packaging
White
200 g 3 Kg1 KgWater/powder ratio
Mixing time (manual)
Working time
Setting time (VICAT)
Setting expansion 2 hrs
Setting expansion 48 hrs
Compressive strength 1 hr
Compressive strength 48 hr
30 ml / 100 g
45:00 min
2:00 min
3:00 min
0.02 %
0.06 %
26 MPa (265 kg/cm2)
59 MPa (602 kg/cm2)
C410107 C410106 C410105 C410241 C410351
25 kgsack
25 kgdrum
Accessories
C300992
C300991
C410462
C410461
C419000
C400440
Rubber bowl
Spatula (x1)
Water dispenser
Measuring scoop (100ml)
1 measuring set
GYPSTRAY - ready-to-use neutral pH cleaning agent for removing dental gypsum from spatulas, resin prostheses and articulators - 1 bottle 2l
Equipment
C305120
C305125
elite® mix mixer for gypsums and investments 230V
elite® mix mixer for gypsums and investments 115V
elite® ortho
134
Type 3 stone for orthodontic models
Dental Stones
• Glossy white after polishing• Optimal compressive strength • Thixotropic for simplified model
production
ADVANTAGES
• Thixotropic• Low expansion• Glossy white
CHARACTERISTICS
• Production of models for orthodontics and antagonists
USE
Technical data Packaging
White
200 g 3 Kg1 Kg 25 kgsack
25 kgdrum
Water/powder ratio (New Ratio)
Mixing time (manual)
Mixing time (vacuum)
Working time
Setting time (VICAT)
Removal time
Setting expansion 2 hrs
Setting expansion 48 hrs
Compressive strength 1 hr
Compressive strength 48 hr
24 ml / 100 g
1:00 min
0:30 min
7:00 min
14:00 min
45:00 min
0.04 %
0.05 %
32 MPa (326 kg/cm2)
60 MPa (612 kg/cm2)
C410092 C410091 C410090 C410230 C410320
Accessories
C300992
C300991
C410462
C410461
C419000
C400440
Rubber bowl
Spatula (x1)
Water dispenser
Measuring scoop (100ml)
1 measuring set
GYPSTRAY - ready-to-use neutral pH cleaning agent for removing dental gypsum from spatulas, resin prostheses and articulators - 1 bottle 2l
Equipment
C305120
C305125
elite® mix mixer for gypsums and investments 230V
elite® mix mixer for gypsums and investments 115V
gypstray
135
Dental Stones - Detergent
Special neutral pH cleansing agent for gypsum
• Does not contain phosphates or surface-active agents
• Mild• Effective even in the least accessible
areas
ADVANTAGES
• Ready-to-use solution • Effervescent • Light blue colour
CHARACTERISTICS
• Removal of dental gypsum and gypsum investments from trays, resin prostheses and instruments
USE
Technical data
Packaging
C400440 1 bottle, 2 lt
DISINFECTING AGENT DILUTION ACTION TIME
EDTA sodic salt 30:00 min - 60:00 minReady to use
136
AccessoriesDental Stones
Measuring scoop Spatula
Accessories
C300992
C300991
C410462
C410461
C419000
Rubber bowl
Spatula (x1)
Water dispenser
Measuring scoop (100ml)
1 measuring set (powder & water measures)
Water dispenserRubber bowl
Addition siliconesDuplication of models with lab putty & clear silicone
platinum 85
platinum 95
elite® transparent
Gingival mask reproduction gingifast ELASTIC
gingifast RIGID
Duplication siliconeselite® double 8
elite® double 16 FAST
elite® double 16 EXTRA FAST
elite® double 22
elite® double 22 FAST
elite® double 22 EXTRA FAST
elite® double 32
elite® double 32 FAST
elite® double 32 EXTRA FAST
Debubblizing spray-solutiontensilab
accessories
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
platinum 85
138
Technical data
Packaging
Addition silicones - Duplication of models with lab putty & clear silicone
High precision laboratory A-Silicone putty material
Mixing time
Total working time (23°C/73°F)
Setting time (23°C/73°F)
Hardness (Shore A after 24 h)
Detail reproduction
Dimensional stability (after 24 h)
Compressive deformation
Elastic recovery
Heat resistance
C400727
C400725
C400723
0:30 min
2:00 min
6:00 min
85
2 μm
- 0.05 %
< 1 %
> 99.5 %
> 200°C
1 tub, 450 g Base + 1 tub, 450 g Catalyst
1 tub, 1 kg Base + 1 tub, 1 kg Catalyst
1 tub, 5 kg Base + 1 tub, 5 kg Catalyst
• Very high flowability• Superior dimensional stability• Heat resistance (over 200ºC)• Easy handling• Excellent detail definition• Linear variation: -0.058% after 24 hours• No deformation in flask
ADVANTAGES
• 1:1 Mixing ratio • Biocompatible • Final hardness 85 Shore A • Green colour
CHARACTERISTICS
• Duplication denture moulds• Die in full dentures• Control matrix for the design of metal
structures• Matrix support for the working of metal
free aesthetic materials• Isolation and protection of a denture
from high temperatures in a flask
USE
Warning: it is advisable not to use latex gloves.
platinum 95
139
Technical data
Addition silicones - Duplication of models with lab putty & clear silicone
High precision laboratory A-Silicone putty material
Mixing time
Total working time (23°C/73°F)
Setting time (23°C/73°F)
Hardness (Shore A after 24 h)
Detail reproduction
Dimensional stability (after 24 h)
Compressive deformation
Elastic recovery
Heat resistance
0:30 min
2:00 min
6:00 min
95
2 μm
- 0.05 %
< 1 %
99.5 %
> 200°C
Warning: it is advisable not to use latex gloves.
• Very high flowability• Superior dimensional stability• Heat resistance (over 200ºC)• Easy handling• Excellent detail definition• Can be milled• Linear variation: -0.058% after 24 hours• No deformation in flask
ADVANTAGES
• 1:1 Mixing ratio • Biocompatible • Final hardness 95 Shore A • Light blue colour
CHARACTERISTICS
• Duplication of denture moulds• Ceramics technique printed on
verticulator• Die in full dentures• Control matrix for the design of metal
structures• Denture repair• Bite recording key for positioning in
articulator• Matrix for use in making temporary
crowns/bridges• Matrix support for the working of metal
free aesthetic materials• Insulation of teeth/plaster in flask
USE
Packaging
C400720
C400700
C400710
1 tub, 450 g Base + 1 tub, 450 g Catalyst
1 tub, 1 kg Base + 1 tub, 1 kg Catalyst
1 tub, 5 kg Base + 1 tub, 5 kg Catalyst
elite® transparent
140
Technical data
Packaging Accessories
Addition silicones - Duplication of models with lab putty & clear silicone
Flowable transparent laboratory A-silicone with high final hardness (72 Shore A)
Total working time (23°C/73°F)
Setting time (23°C/73°F)
Hardness (Shore A after 1 h)
Dimensional stability (after 24 h)
Tensile strength
Tear strength
C401600
1:30 min
15:00 min
≥ 72
0.185 %
≥ 6.5 N/mm2
≥ 4 N/mm
1 cartridge, 50 ml + 6 mixing tips small/yellow
C202070
C202100
Mixing tips small/yellow (x48)
Dispenser D2 -1:1
• Flowability and high final hardness• Innovative compared to the traditional
light-curing resin working technique• Compact surfaces and reduced
working time• Lower number of porosities inside
the composite thanks to total light penetration
• Possibility to store the template if necessary, thanks to its stability in time
• Oxygen-free composite light curing, more compact surfaces
ADVANTAGES
• Very high transparency level• Addition silicone formulation in a
cartridge
CHARACTERISTICS
• Developed for light-curing aesthetic materials
• Accurate waxing detection and composite reproduction
USE
gingifast Elastic
141
Technical data
Packaging Accessories
Laboratory A-silicone for gingival reproduction on models. Elastic type
Mixing ratio Base:Catalyst
Total working time (23°C/73°F)
Setting time (23°C/73°F)
Hardness (Shore A after 1 h)
C401500
1:1
2:00 min
10:00 min
40
Standard Pack:2 cartridge, 50 ml each + 1 Gingifast Separator, bottle 10ml+ mixing tips small/yellow (x12)+ yellow intraoral tips (x12)+ spray
C400887
C202070
C202090
C202100
Gingifast Separator, bottle 10ml
Mixing tips small/yellow (x48)
Yellow oral tips (x48)
D2 Dispenser -1:1
Addition silicones - Gingival mask reproduction
• The highly elastic module facilitates model removal and reinsertion
• Excellent aesthetic result due to its translucency characterized by veining
• Precision and dimensional stability• Can be used both with direct and indirect
technique
ADVANTAGES
• Addition silicone formulation in a cartridge
CHARACTERISTICS
• Gingival reproduction for models in fixed prostheses
USE
gingifast Rigid
142
Technical data
Packaging Accessories
Laboratory A-silicone for gingival reproduction on models. Rigid type
Mixing ratio Base:Catalyst
Total working time (23°C/73°F)
Setting time (23°C/73°F)
Hardness (Shore A after 1 h)
C401520
1:1
2:00 min
10:00 min
70
Standard Pack:2 cartridge, 50 ml each + 1 Gingifast Separator, bottle 10ml+ mixing tips small/yellow (x12)+ yellow intraoral tips (x12)+ spray
C400887
C202070
C202090
C202100
Gingifast Separator, bottle 10ml
Mixing tips small/yellow (x48)
Yellow oral tips (x48)
D2 Dispenser -1:1
Addition silicones - Gingival mask reproduction
• Easy to Trim: permits accurate margin definition
• Indicated for implant prosthetics• Precision and dimensional stability
ADVANTAGES
• Addition silicone formulation in a cartridge
CHARACTERISTICS
• Gingival reproduction for implant prosthetic models. Indicated for direct technique
USE
elite® double 8
143
A-Silicone for laboratory model duplication
Addition silicones - Duplication silicones
• Mixing facilitated by the 1:1 base to catalyst ratio
• High fluidity: does not require mixing in a vacuum
• Absolute precision for faithful reproduction of detail
• Dimensional stability over time and non-deformability, allowing a number of duplications to be made
• Compatible with all plasters, polyurethane resins, phosphate and alcohol based investments and acrylic resins
ADVANTAGES
• Extreme fluidity• Excellent elasticity, thanks to the 8 Shore
A hardness• Translucence to emphasise the
homogeneity of the resulting negative• Pink colour
CHARACTERISTICS
• Ideal for duplicating stumps using the all ceramic technique and models with accentuated undercuts and low density investments
• Use of a plastic duplication flasks is recommended
USE
Technical data
Base:catalyst mixing ratio
Manual mixing time (23°C/73°F)
Mechanical mixing time (23°C/73°F)
Working time (23°C/73°F)
Setting time (23°C/73°F)
Hardness after 24 hours (Shore A)
Reproduction of detail
Dimensional variation (after 24h)
Breaking strength
Elongation at break
Resistance to tearing
Elasticity
1:1
1:00 min
0:30 min
10:00 min
20:00 min
8
2 μm
- 0.05 %
2.2 N/mm2
380 %
2.5 N/mm2
99.95 %
Accessories
Packaging
C400530
C400940
C400900
C400820
C400830
C400850
Tensilab - 1 x 120 ml bottle + spray cap
250 ml graduated beakers
Dosage Cap for elite® Double 5kg/10kg packs
250 g (Base) + 250 g (Catalyst)
1 Kg (Base) + 1 Kg (Catalyst)
5 Kg (Base) + 5 Kg (Catalyst)
elite® double 16 FAST
144
Technical data
Base:catalyst mixing ratio
Manual mixing time (23°C/73°F)
Mechanical mixing time (23°C/73°F)
Working time (23°C/73°F)
Setting time (23°C/73°F)
Hardness after 24 hours (Shore A)
Reproduction of detail
Dimensional variation (after 24h)
Breaking strength
Elongation at break
Resistance to tearing
Elasticity
1:1
1:00 min
0:30 min
5:00 min
10:00 min
16
2 μm
- 0.05 %
2.5 N/mm2
550 %
5 N/mm2
99.95 %
Accessories
Packaging
C400530
C400940
C400900
C400825
C400831
C400847
Tensilab - 1 x 120 ml bottle + spray cap
250 ml graduated beakers
Dosage Cap for elite® Double 5kg/10kg packs
250 g (Base) + 250 g (Catalyst)
1 Kg (Base) + 1 Kg (Catalyst)
5 Kg (Base) + 5 Kg (Catalyst)
A-Silicone for laboratory model duplication
Addition silicones - Duplication silicones
• Rapidity: a duplicate can be obtained in just 10 minutes (23°C/73°F)
• Mixing facilitated by the 1:1 base to catalyst ratio
• High fluidity: does not require mixing in a vacuum
• Absolute precision for faithful reproduction of detail
• Dimensional stability over time and non-deformability, allowing a number of duplications to be made
• Compatible with all plasters, polyurethane resins, phosphate and alcohol based investments and acrylic resins
ADVANTAGES
• Fast setting time• Extreme fluidity• Excellent elasticity, thanks to the 16
Shore A hardness• Purple for better definition of detail
CHARACTERISTICS
• Ideal for duplicating stumps using the all ceramic technique and models with accentuated undercuts and investments
• Use of a plastic duplication flasks is recommended
USE
elite® double 16 EXTRA FAST
145
A-Silicone for laboratory model duplication
Addition silicones - Duplication silicones
• The use of Doublemix or automatic mixers enables a duplicate to be obtained in just five minutes (23°C/73°F)
• Mixing facilitated by the 1:1 base to catalyst ratio
• High fluidity• Absolute precision for faithful
reproduction of detail• Dimensional stability over time and
non-deformability, allowing a number of duplications to be made
• Compatible with all plasters, polyurethane resins, phosphate and alcohol based investments and acrylic resins
ADVANTAGES
• Extra fast setting time• Extreme fluidity• Excellent elasticity, thanks to the 16
Shore A hardness• Lilac for better definition of detail
CHARACTERISTICS
• Ideal for duplicating stumps using the all ceramic technique and models with undercuts and investments.
• The use of Doublemix or automatic mixers with plastic duplication flasks is recommended
USE
Technical data
Base:catalyst mixing ratio
Manual mixing time (23°C/73°F)
Mechanical mixing time (23°C/73°F)
Working time (23°C/73°F)
Setting time (23°C/73°F)
Hardness after 24 hours (Shore A)
Reproduction of detail
Dimensional variation (after 24h)
Breaking strength
Elongation at break
Resistance to tearing
Elasticity
1:1
Automatic mixer
Automatic mixer
1:30 min
5:00 min
16
2 μm
- 0.05 %
2.5 N/mm2
550 %
5 N/mm2
99.95 %
Accessories
Equipment
Packaging
C400530
C400940
C400900
C309020
C309021
C309022
C400837
C400848
Tensilab - 1 x 120 ml bottle + spray cap
250 ml graduated beakers
Dosage Cap for elite® Double 5kg/10kg packs
Doublemix - Automatic mixer 230V
Doublemix - Automatic mixer 115V
Doublemix - Automatic mixer 230V UK
1 Kg (Base) + 1 Kg (Catalyst)
5 Kg (Base) + 5 Kg (Catalyst)
elite® double 22
146
A-Silicone for laboratory model duplication
Addition silicones - Duplication silicones
• Mixing facilitated by the 1:1 base to catalyst ratio
• High fluidity: does not require mixing in a vacuum
• Absolute precision for faithful reproduction of detail
• Dimensional stability over time and non-deformability, allowing a number of duplications to be made
• Compatible with all plasters, polyurethane resins, phosphate investments and acrylic resins
ADVANTAGES
• Extreme fluidity• Versatile, thanks to the 22 Shore A
hardness• Light green colour
CHARACTERISTICS
• Ideal for duplicating models with slight undercuts and casting investments
• Use of a plastic duplication flasks is recommended
• Available in light green for better definition of detail
USE
Technical data
1:1
1:00 min
0:30 min
10:00 min
20:00 min
22
2 μm
- 0.05 %
2.5 N/mm2
550 %
5 N/mm2
99.95 %
Accessories
Packaging
C400530
C400940
C400900
C400821
C400832
C400840
C400912
Tensilab - 1 x 120 ml bottle + spray cap
250 ml graduated beakers
Dosage Cap for elite® Double 5kg/10kg packs
250 g (Base) + 250 g (Catalyst)
1 Kg (Base) + 1 Kg (Catalyst)
5 Kg (Base) + 5 Kg (Catalyst)
10 Kg (Base) + 10 Kg (Catalyst)
Base:catalyst mixing ratio
Manual mixing time (23°C/73°F)
Mechanical mixing time (23°C/73°F)
Working time (23°C/73°F)
Setting time (23°C/73°F)
Hardness after 24 hours (Shore A)
Reproduction of detail
Dimensional variation (after 24h)
Breaking strength
Elongation at break
Resistance to tearing
Elasticity
elite® double 22 FAST
147
A-Silicone for laboratory model duplication
Addition silicones - Duplication silicones
• Rapidity: a duplicate can be obtained in just 10 minutes (23°C/73°F)
• Mixing facilitated by the 1:1 base to catalyst ratio
• High fluidity• Absolute precision for faithful
reproduction of detail• Dimensional stability over time and
non-deformability, allowing a number of duplications to be made
• Compatible with all plasters, polyurethane resins, phosphate and alcohol based investments and acrylic resins
ADVANTAGES
• Extreme fluidity• Versatile, thanks to the 22 Shore A
hardness • Orange colour
CHARACTERISTICS
• Suitable for all duplication techniques where rapid duplication is required. Ideal for duplicating models with slight undercuts and investments
• Use of a plastic duplication flasks is recommended
USE
Technical data
1:1
1:00 min
0:30 min
5:00 min
10:00 min
22
2 μm
- 0.05 %
2.5 N/mm2
450 %
5 N/mm2
99.95 %
Accessories
Packaging
C400530
C400940
C400900
C400823
C400834
C400842
C400913
Tensilab - 1 x 120 ml bottle + spray cap
250 ml graduated beakers
Dosage Cap for elite® Double 5kg/10kg packs
250 g (Base) + 250 g (Catalyst)
1 Kg (Base) + 1 Kg (Catalyst)
5 Kg (Base) + 5 Kg (Catalyst)
10 Kg (Base) + 10 Kg (Catalyst)
Base:catalyst mixing ratio
Manual mixing time (23°C/73°F)
Mechanical mixing time (23°C/73°F)
Working time (23°C/73°F)
Setting time (23°C/73°F)
Hardness after 24 hours (Shore A)
Reproduction of detail
Dimensional variation (after 24h)
Breaking strength
Elongation at break
Resistance to tearing
Elasticity
elite® double 22 EXTRA FAST
148
Technical data
1:1
Automatic mixer
Automatic mixer
1:30 min
5:00 min
22
2 μm
- 0.05 %
2.5 N/mm2
450 %
5 N/mm2
99.95 %
Packaging
C400838
C400849
C400914
1 Kg (Base) + 1 Kg (Catalyst)
5 Kg (Base) + 5 Kg (Catalyst)
10 Kg (Base) + 10 Kg (Catalyst)
A-Silicone for laboratory model duplication
Addition silicones - Duplication silicones
• The use of Doublemix or automatic mixers enables a duplicate to be obtained in just five minutes (23°C/73°F)
• Mixing facilitated by the 1:1 base to catalyst ratio
• High fluidity• Absolute precision for faithful
reproduction of detail• Dimensional stability over time and
non-deformability, allowing a number of duplications to be made
• Compatible with all plasters, polyurethane resins, phosphate and alcohol based investments and acrylic resins
ADVANTAGES
• Versatile, thanks to the 22 Shore A hardness
• Grey colour
CHARACTERISTICS
• Suitable for all duplication techniques where rapid duplication is required. Ideal for duplicating models with slight undercuts and resistant investments.
• The use of Doublemix or automatic mixers with plastic duplication flasks is recommended
USE
Accessories
Equipment
C400530
C400940
C400900
C309020
C309021
C309022
Tensilab - 1 x 120 ml bottle + spray cap
250 ml graduated beakers
Dosage Cap for elite® Double 5kg/10kg packs
Doublemix - Automatic mixer 230V
Doublemix - Automatic mixer 115V
Doublemix - Automatic mixer 230V UK
Base:catalyst mixing ratio
Manual mixing time (23°C/73°F)
Mechanical mixing time (23°C/73°F)
Working time (23°C/73°F)
Setting time (23°C/73°F)
Hardness after 24 hours (Shore A)
Reproduction of detail
Dimensional variation (after 24h)
Breaking strength
Elongation at break
Resistance to tearing
Elasticity
elite® double 32
149
A-Silicone for laboratory model duplication
• Mixing facilitated by the 1:1 base to catalyst ratio
• High fluidity• Absolute precision for faithful
reproduction of detail• Dimensional stability over time and
non-deformability, allowing a number of duplications to be made
• Compatible with all plasters, polyurethane resins, phosphate investments and acrylic resins
ADVANTAGES
• Specific for its 32 Shore A hardness• Balanced formula for an ideal relationship
between hardness and elasticity• Maximum precision in the duplication of
composite prostheses and when using conometry
• Apple green colour
CHARACTERISTICS
• Ideal for duplicating models and casting investments
• Use of a plastic duplication flasks is recommended
• Available in apple green for better definition of detail
USE
Addition silicones - Duplication silicones
Technical data
1:1
1:00 min
0:30 min
10:00 min
20:00 min
32
2 μm
- 0.05 %
2.5 N/mm2
350 %
5 N/mm2
99.95 %
Accessories
Packaging
C400530
C400940
C400900
C400833
C400841
C400915
Tensilab - 1 x 120 ml bottle + spray cap
250 ml graduated beakers
Dosage Cap for elite® Double 5kg/10kg packs
1 Kg (Base) + 1 Kg (Catalyst)
5 Kg (Base) + 5 Kg (Catalyst)
10 Kg (Base) + 10 Kg (Catalyst)
Base:catalyst mixing ratio
Manual mixing time (23°C/73°F)
Mechanical mixing time (23°C/73°F)
Working time (23°C/73°F)
Setting time (23°C/73°F)
Hardness after 24 hours (Shore A)
Reproduction of detail
Dimensional variation (after 24h)
Breaking strength
Elongation at break
Resistance to tearing
Elasticity
elite® double 32 FAST
150
Technical data
1:1
1:00 min
0:30 min
5:00 min
10:00 min
32
2 μm
- 0.05 %
2.5 N/mm2
350 %
5 N/mm2
99.95 %
Accessories
Packaging
C400530
C400940
C400900
C400824
C400836
C400843
C400916
Tensilab - 1 x 120 ml bottle + spray cap
250 ml graduated beakers
Dosage Cap for elite® Double 5kg/10kg packs
250 g (Base) + 250 g (Catalyst)
1 Kg (Base) + 1 Kg (Catalyst)
5 Kg (Base) + 5 Kg (Catalyst)
10 Kg (Base) + 10 Kg (Catalyst)
A-Silicone for laboratory model duplication
Addition silicones - Duplication silicones
• Rapidity: a duplicate can be obtained in just 10 minutes (23°C/73°F)
• Mixing facilitated by the 1:1 base to catalyst ratio
• High fluidity• Absolute precision for faithful
reproduction of detail• Dimensional stability over time and
non-deformability, allowing a number of duplications to be made
• Compatible with all plasters, polyurethane resins, phosphate investments and acrylic resins
ADVANTAGES
• Specific for its 32 Shore A hardness• Balanced formula for an ideal relationship
between hardness and elasticity• Maximum precision in the duplication of
composite prostheses and when using conometry
• Blue colour
CHARACTERISTICS
• Ideal for duplicating models and casting investments
USE
Base:catalyst mixing ratio
Manual mixing time (23°C/73°F)
Mechanical mixing time (23°C/73°F)
Working time (23°C/73°F)
Setting time (23°C/73°F)
Hardness after 24 hours (Shore A)
Reproduction of detail
Dimensional variation (after 24h)
Breaking strength
Elongation at break
Resistance to tearing
Elasticity
elite® double 32 EXTRA FAST
151
A-Silicone for laboratory model duplication
• The use of Doublemix or automatic mixers enables a duplicate to be obtained in just five minutes (23°C/73°F)
• Mixing facilitated by the 1:1 base to catalyst ratio
• High fluidity• Absolute precision for faithful
reproduction of detail• Dimensional stability over time and
non-deformability, allowing a number of duplications to be made
• Compatible with all plasters, polyurethane resins, phosphate investments and acrylic resins
ADVANTAGES
• Specific for its 32 Shore A hardness• Balanced formula for an ideal relationship
between hardness and elasticity• Maximum precision in the duplication of
composite prostheses and when using conometry
• Orange colour
CHARACTERISTICS
• Ideal for duplicating models and casting investments
• The use of Doublemix or automatic mixers with plastic duplication flasks is recommended
USE
Addition silicones - Duplication silicones
Technical data
1:1
Automatic mixer
Automatic mixer
1:30 min
5:00 min
32
2 μm
- 0.05 %
2.5 N/mm2
350 %
5 N/mm2
99.95 %
Packaging
C400839
C400853
1 Kg (Base) + 1 Kg (Catalyst)
5 Kg (Base) + 5 Kg (Catalyst)
Accessories
Equipment
C400530
C400940
C400900
C309020
C309021
C309022
Tensilab - 1 x 120 ml bottle + spray cap
250 ml graduated beakers
Dosage Cap for elite® Double 5kg/10kg packs
Doublemix - Automatic mixer 230V
Doublemix - Automatic mixer 115V
Doublemix - Automatic mixer 230V UK
Base:catalyst mixing ratio
Manual mixing time (23°C/73°F)
Mechanical mixing time (23°C/73°F)
Working time (23°C/73°F)
Setting time (23°C/73°F)
Hardness after 24 hours (Shore A)
Reproduction of detail
Dimensional variation (after 24h)
Breaking strength
Elongation at break
Resistance to tearing
Elasticity
tensilab
152
C400530 1 bottle, 120 ml with spray
Packaging
Alcohol based surface-active spray solution
Addition silicones - Debubblizing spray-solution
• Avoids the possibility of bubble formation• Essential for accurate detail reproduction
ADVANTAGES
• No-gas spray solution• Alcohol based for quick evaporation• Does not create thickness
CHARACTERISTICS
• Reduces surface tension when applied to the model, thereby increasing flowability of watery materials (gypsum and investments). This reduces the possibility of bubble formation, improving detail reproduction accuracy. It is recommended to use Tensilab with all impression elastomers
USE
153
Packaging
AccessoriesAddition silicones
Mixing tips D2 Dispenser Oral tips
Spatula for siliconesGingifast Separator
C202070
C202100
C202090
C207200
C400530
C400940
C400900
C400887
Mixing tips small/yellow (x48)
D2 Dispenser -1:1
Yellow oral tips (x48)
Spatula for silicones
Tensilab - 1 x 120 ml bottle + spray cap
250 ml graduated beakers
Dosage Cap for elite® Double 5kg/10kg packs
Gingifast Separator, bottle 10ml
C-SiliconesDuplication of models with lab putty
zetalabor
titanium
indurent gel
indurent liquid
156
157
158
159
zetalabor
156
Mixing time
Total working time (23°C/73°F)
Setting time (23°C/73°F)
Hardness (Shore A after 24 h)
Detail reproduction
Dimensional stability (after 24 h)
Compressive deformation
Elastic recovery
0:30 min
2:00 min
6:00 min
80
2 μm
-0.10 %
< 1 %
99 %
0:30 min
1:30 min
5:30 min
85
2 μm
-0.20 %
< 1 %
99 %
Packaging
INDURENT LIQUIDINDURENT GEL
C-Silicones - Duplication of models with lab putty
C-Silicone Laboratory Putty
• High initial flowability • Good final hardness • High detail reproduction • No deformation in flask. Good breaking
strength• Heat resistance 140°C• High elastic resistance
ADVANTAGES
• To be mixed with gel or liquid catalyst • Final hardness (85 Shore A) • Non-pigmented
CHARACTERISTICS
• Duplication of denture moulds• Control matrix for the design of metal
structures• Impressions for copy denture technique• Matrix for use in making temporary
crowns/bridges• Matrix for the reproduction of gingival
tissue (e.g. Zhermack’s gingifast)• Insulation of teeth/gypsum in muffle
USE
Technical data
C100700
C100390
Indurent gel 1 tube, 60 ml
Indurent liquid 1 bottle, 30 ml
C400791
C400790
C400811
C400804
C400812
1 tub, 900 g
1 tub, 2,6 kg
1 tub, 5 kg
1 tub, 10 kg
1 tub, 25 kg
Accessories
titanium
157
C-Silicones - Duplication of models with lab putty
Extra-Rigid Setting C-Silicone Laboratory Putty
• Very high initial flowability• Good final hardness• High detail reproduction• No deformation in flask. Good breaking • Heat resistance 180°C• High elastic resistance
ADVANTAGES
• To be mixed with gel or liquid catalyst• Final hardness (95 Shore A) • White colour
CHARACTERISTICS
• Duplication of denture moulds• Control mask for the design of metal
structures• Impressions for copy denture technique• Matrix for use in making temporary
crowns/bridges• Matrix for the reproduction of gingival
tissue (e.g. Zhermack’s gingifast)• Insulation of teeth/gypsum in muffle
USE
Mixing time
Total working time (23°C/73°F)
Setting time (23°C/73°F)
Hardness (Shore A after 24 h)
Detail reproduction
Dimensional stability (after 24 h)
Compressive deformation
Elastic recovery
0:30 min
2:00 min
6:00 min
90
2 μm
-0.10 %
< 1 %
99 %
0:30 min
1:30 min
5:30 min
95
2 μm
-0.20 %
< 1 %
99 %
INDURENT LIQUIDINDURENT GEL
Technical data
Packaging
C100700
C100390
Indurent gel 1 tube, 60 ml
Indurent liquid 1 bottle, 30 ml
C400650
C400605
C400611
C400631
C400635
1 tub, 900 g
1 tub, 2,6 kg
1 tub, 5 kg
1 tub, 10 kg
1 tub, 25 kg
Accessories
indurent gel
158
Dosage
Gel catalyst for C-Silicones
Zetalabor
Titanium2 strips (the length of the scoop head) for each scoop of putty
Packaging
C100700 1 tube, 60 ml
• Versatility• Easy dispensing
ADVANTAGES
• Red gel for homogeneous mixing control
CHARACTERISTICS
• Single catalyst for all Zhermack clinical C-silicones (zetaplus system) and technical (zetalabor and titanium)
USE
C-Silicones - Duplication of models with lab putty
indurent liquid
159
Liquid catalyst for C-Silicones
• Versatility• Easy dispensing
ADVANTAGES
• Colourless liquid
CHARACTERISTICS
• Single catalyst for all Zhermack clinical C-silicones (zetaplus system) and technical (zetalabor and titanium)
USE
5 - 6 drops for each measurer of material
Packaging
C100390 1 bottle, 30 ml
Dosage
Zetalabor
Titanium
C-Silicones - Duplication of models with lab putty
Resins LaboratoryAcrylic resins for prosthetic bases
prothyl press EVO
prothyl hi-impact EVO
prothyl thermo EVO
prothyl repair EVO
Resins for individual impression trays elite® SC tray EVO
elite® LC tray
Polishing pasteprothyl polisher
Insulating gypsum - resin / gypsum - gypsumprothyl isolator
162
163
164
165
166
167
168
169
prothyl press EVO
162
Resins Laboratory - Acrylic resins for prosthetic bases
Acrylic prosthesis resin pressure-cured with casting techniques
• Excellent fluidity and consistency in the casting phase
• Extreme ease of use• Innovative resin, ideal for the casting
technique with rapid pressure-cured resin• Colour stability over time
ADVANTAGES
• Residual monomer <2.7% (value specified in the ISO standard <4.5%)
• Wide range of colours:- OP: Orange Pink- DP: Deep Pink- NP: Normal Pink- OPV: Orange Pink Veined - DPV: Deep Pink Veined - NPV: Normal Pink Veined - T: Transparent (specific for functional bites
and implants)• Glass bottle with dispenser for the
monomer liquid• Small packs of 200 g powder and 100 ml
monomer available• Kit with resin casting flask as an
introduction to the technique • Graduated measures available on request• Colour match with prothyl repair EVO
self-curing resin• Complies with UNI EN ISO 20795-1
CHARACTERISTICS
• Total prostheses with casting techniques• Partial prostheses• Combined prostheses• Rebasing• Prostheses on implants
USE
Technical data
Packaging
Powder/liquid mixing ratio
Curing times
Maximum residual monomer content
Bend strength
Absorption in water
Solubility in water
Accessories
Equipment
10 g / 7 ml
30’ at 60°C and 2 bar
< 2.7 %
74 MPa
5 ± 0.1 μg/mm3
0.3 ± 0.1 μg/mm3
C711040
C711041
C711042
C711043
C711044
C711045
C711046
C711047
Bottle liquid 500 ml
Cont. powder 1 kg - OP
Cont. powder 1 kg - OPV
Cont. powder 1 kg - DP
Cont. powder 1 kg - DPV
Cont. powder 1 kg - NP
Cont. powder 1 kg - NPV
Cont. powder 1 kg - T
C711050
C711051
C711052
C711053
C711054
C711055
C711056
C711057
Bottle liquid 100 ml
Cont. powder 200 g - OP
Cont. powder 200 g - OPV
Cont. powder 200 g - DP
Cont. powder 200 g - DPV
Cont. powder 200 g - NP
Cont. powder 200 g - NPV
Cont. powder 200 g - T
Prothyl Polisher bottle 150 g
Prothyl Isolator bottle 250 ml
Prothyl Isolator bottle 1000 ml
Prothyl press EVO Kit - OP
Prothyl press EVO Kit - OPV
Prothyl press EVO Kit - DP
Prothyl press EVO Kit - DPV
Prothyl press EVO Kit - NP
Prothyl press EVO Kit – NPV
Prothyl press EVO Kit - T
Prothyl EVO set of measures
Prothyl Press EVO flask
Prothyl Press EVO syringe
Prothyl EVO colour scale
Polimer 180 pressure polymeriser
C710130
C710140
C710142
C711058
C711059
C711060
C711061
C711062
C711063
C711064
C711100
C711101
C711102
C711105
C305702
prothyl hi-impact EVO
163
Technical data
Packaging
Resins Laboratory - Acrylic resins for prosthetic bases
Hot-cured acrylic prosthesis resin with high impact resistance
Powder/liquid mixing ratio
Curing times
Maximum residual monomer content
Bend strength
Breaking strength
Impact resistance
Absorption in water
Solubility in water
• Excellent consistency during working and flask casting
• Extreme ease of use• Special formula high quality resin with
elastomers for exceptional impact resistance and bend strength
• Colour stability over time
ADVANTAGES
• High impact resistance compared to standard resins 2.7 KJ/m2
• Residual monomer <0.5% (value specified in the ISO standard <2.2%)
• Wide range of colours:- OP: Orange Pink- DP: Deep Pink- NP: Normal Pink- OPV: Orange Pink Veined - DPV: Deep Pink Veined - NPV: Normal Pink Veined • Glass bottle with dispenser for the
monomer liquid• Small packs of 200 g powder and 100 ml
monomer available• Graduated measures available on request• Colour match with prothyl repair EVO
self-curing resin• Complies with UNI EN ISO 20795-1
CHARACTERISTICS
• Total prostheses• Partial prostheses• Combined prostheses• Rebasing• Prostheses on implants
USE
Accessories
Equipment
C711000
C711001
C711002
C711003
C711004
C711005
C711006
Bottle liquid 500 ml
Cont. powder 1 kg - OP
Cont. powder 1 kg - OPV
Cont. powder 1 kg - DP
Cont. powder 1 kg - DPV
Cont. powder 1 kg - NP
Cont. powder 1 kg - NPV
C711010
C711011
C711012
C711013
C711014
C711015
C711016
Bottle liquid 100 ml
Cont. powder 200 g - OP
Cont. powder 200 g - OPV
Cont. powder 200 g - DP
Cont. powder 200 g - DPV
Cont. powder 200 g - NP
Cont. powder 200 g - NPV
Prothyl Polisher bottle 150 g
Prothyl Isolator bottle 250 ml
Prothyl Isolator bottle 1000 ml
Prothyl EVO set of measures
Prothyl EVO colour scale
prothyl polimer polymeriser for boiling
C710130
C710140
C710142
C711100
C711105
C305707
21 g / 10 ml
90’ at 75°C + 30’ at 100°C
< 0.5 %
86 MPa
1100 J/m2
2.7 KJ/m2
5.9 ± 0.4 μg/mm3
0.2 μg/mm3
prothyl thermo EVO
164
Hot-cured acrylic prosthesis resin
Resins Laboratory - Acrylic resins for prosthetic bases
• Quick curing times• Excellent consistency during working and
flask casting• Extreme ease of use• Traditional hot-cured resin with a new
concept formula for maximum quality during flask casting
• Colour stability over time
ADVANTAGES
• Residual monomer <1% (value specified in the ISO standard <2.2%)
• Curing completed in 50’• Wide range of colours:- OP: Orange Pink- DP: Deep Pink- NP: Normal Pink- OPV: Orange Pink Veined - DPV: Deep Pink Veined - NPV: Normal Pink Veined - T: Transparent (specific for functional bites
and implants)• Glass bottle with dispenser for the
monomer liquid• Small packs of 200 g powder and 100 ml
monomer available• Graduated measures available on request• Colour match with prothyl repair EVO
self-curing resin• Complies with UNI EN ISO 20795-1
CHARACTERISTICS
• Total prostheses• Partial prostheses• Combined prostheses• Rebasing• Prostheses on implants
USE
Technical data
Packaging
Powder/liquid mixing ratio
Curing times
Maximum residual monomer content
Bend strength
Absorption in water
Solubility in water
Accessories
Equipment
Prothyl Polisher bottle 150 g
Prothyl Isolator bottle 250 ml
Prothyl Isolator bottle 1000 ml
Prothyl EVO set of measures
Prothyl EVO colour scale
prothyl polimer polymeriser for boiling
C710130
C710140
C710142
C711100
C711105
C305707
10 g / 4.5 ml
10’ at 80°C + 40’ at 100°C
< 1 %
86 MPa
6.2 ± 0.1 μg/mm3
0.2 μg/mm3
Bottle liquid 500 ml
Cont. powder 1 kg - OP
Cont. powder 1 kg - OPV
Cont. powder 1 kg - DP
Cont. powder 1 kg - DPV
Cont. powder 1 kg - NP
Cont. powder 1 kg - NPV
Cont. powder 1 kg - T
C711020
C711021
C711022
C711023
C711024
C711025
C711026
C711027
C711030
C711031
C711032
C711033
C711034
C711035
C711036
C711037
Bottle liquid 100 ml
Cont. powder 200 g - OP
Cont. powder 200 g - OPV
Cont. powder 200 g - DP
Cont. powder 200 g - DPV
Cont. powder 200 g - NP
Cont. powder 200 g - NPV
Cont. powder 200 g - T
prothyl repair EVO
165
Self-curing acrylic prosthesis repair resin
Resins Laboratory - Acrylic resins for prosthetic bases
• Extreme ease of use• Prothyl Repair stands out for its perfect
adhesion and repeatable colour match with other resins in the prothyl EVO range
• Colour stability over time
ADVANTAGES
• Perfect adhesion with methyl methacrylate based resins
• Residual monomer <2.4% (value specified in the ISO standard <4.5%)
• Colour match with prothyl press EVO and prothyl thermo EVO resins
• Wide range of colours:- OP: Orange Pink- DP: Deep Pink- NP: Normal Pink- OPV: Orange Pink Veined - DPV: Deep Pink Veined - NPV: Normal Pink Veined - T: Transparent (specific for functional bites
and implants)• Glass bottle with dispenser for the
monomer liquid• Small packs of 200 g powder and 100 ml
monomer available• Graduated measures available on request• Colour match with prothyl press EVO and
prothyl thermo EVO resins• Complies with UNI EN ISO 20795-1
CHARACTERISTICS
• Repairs• Temporary prostheses• Combined prostheses• Rebasing• Prosthesis extensions
USE
Technical data
Packaging
Powder/liquid mixing ratio
Curing times
Maximum residual monomer content
Bend strength
Absorption in water
Solubility in water
Accessories
Equipment
Prothyl Polisher bottle 150 g
Prothyl Isolator bottle 250 ml
Prothyl Isolator bottle 1000 ml
Prothyl EVO set of measures
Prothyl EVO colour scale
Polimer 180 pressure polymeriser
C710130
C710140
C710142
C711100
C711105
C305702
10 g / 5 ml
30’ at 23°C or 20’ at 55°C and 2 bar
< 2.4 %
72 MPa
5.6 ± 0.1 μg/mm3
0.2 ± 0.1 μg/mm3
Bottle liquid 500 ml
Cont. powder 1 kg - OP
Cont. powder 1 kg - OPV
Cont. powder 1 kg - DP
Cont. powder 1 kg - DPV
Cont. powder 1 kg - NP
Cont. powder 1 kg - NPV
Cont. powder 1 kg - T
C711070
C711071
C711072
C711073
C711074
C711075
C711076
C711077
C711080
C711081
C711082
C711083
C711084
C711085
C711086
C711087
Bottle liquid 100 ml
Cont. powder 200 g - OP
Cont. powder 200 g - OPV
Cont. powder 200 g - DP
Cont. powder 200 g - DPV
Cont. powder 200 g - NP
Cont. powder 200 g - NPV
Cont. powder 200 g - T
elite® SC tray EVO
166
Self-curing acrylic resin for individual impression trays
Resins Laboratory - Resins for individual impression trays
• Plastic and workable without being sticky• Rigid and stable during hardening• Very easy to use
ADVANTAGES
• Total hardening time 8 minutes• Size stability guaranteed over time• Colour Y: Yellow• Glass bottle with dispenser for the
monomer liquid• Graduated measures available on request
CHARACTERISTICS
• Individual impression trays• Bite plates• Bases for mounting prosthesis teeth • Fixing plates for registration devices
USE
Technical data
Packaging
Powder/liquid mixing ratio
Curing time
Bend strength
C711090
C711091
22.5 g / 6 ml
8’ at 23°C
30 MPa
Bottle liquid 500 ml
Cont. powder 1 kg - Y
elite® LC tray
167
Technical data
Packaging
Light-curing resin plates
Setting time
Thickness
Hardness after 1:00 min (Shore D)
D500011
D500021
D500031
3:00 - 5:00 min
2.5 mm
80
elite® LC Tray White (x50)
elite® LC Tray Pink (x50)
elite® LC Tray Blue (x50)
Resins Laboratory - Resins for individual impression trays
• Easy moulding, non-sticky• About 20 mins stability to natural or
artificial light• Rigidity and torque strength, dimensional
stability• Even thickness
ADVANTAGES
• Cures with both with halogen and UV curing light (3-5 minutes)
• Available in three colours: White, Pink, and Blue
CHARACTERISTICS
• Special and functional trays• Bite plates• Bases for prostheses tooth mounting• Fixing plates for registration devices
USE
prothyl polisher
168
Packaging
Polishing paste for resins and metals
C710130 1 tube, 150 g
Resins Laboratory - Polishing paste
• Shiny surfaces on resins and metals
ADVANTAGES
• Grey colour
CHARACTERISTICS
• Polisher for resins and metals
USE
prothyl isolator
169
Packaging
Gypsum-acrylic resin alginic insulator
C710140
C710142
1 bottle, 250 ml
1 bottle, 1000 ml
• Maximum precision of the prosthetic work
• Shiny surfaces • Protects gypsum and resin• Perfect separation between gypsum
and resin
ADVANTAGES
• Hot and cold application• Forms a very thin film
CHARACTERISTICS
• Gypsum-resin insulator
USE
Resins Laboratory - Insulating gypsum - resin / gypsum - gypsum
SandsZeta Sand 172
Zeta Sand
172
Packaging
Aluminium oxide 5 x 1kg bag 25 μm
Aluminium oxide 5 x 1kg bag 50 μm
Aluminium oxide 5 x 1kg bag 75 μm
Aluminium oxide 5 x 1kg bag 90 μm
Aluminium oxide 5 x 1kg bag 110 μm
Aluminium oxide 5 x 1kg bag 125 μm
Aluminium oxide 5 x 1kg bag 150 μm
Aluminium oxide 5 x 1kg bag 180 μm
Aluminium oxide 5 x 1kg bag 250 μm
Glass beads 5 x 1kg bag 40/70 μm
Glass beads 5 x 1kg bag 90/150 μm
Glass beads 5 x 1kg bag 150/250 μm
C308200
C308202
C308204
C308206
C308208
C308210
C308212
C308214
C308216
C308218
C308220
C308222
Sands
Aluminium oxide and glass beads for sanding
• Raw material quality ensured by a high level of sieving
• Hermetically hot sealed aluminium bag safeguards sand properties for the entire life cycle of the product
• Single refill 1kg packaging preserves sand from moisture, a main cause of sandblasting machine malfunction
• Wide range of grain sizes allows dental technicians to perform any kind of sanding
ADVANTAGES
• 1kg triple layer aluminium single refill bags• High degree of sieving• Wide range of grain sizes available Packaged in
boxes of 5 x 1kg bags
CHARACTERISTICS
• Abrasion (aluminium oxide) and polishing (glass beads) of surfaces
APPLICATIONS
ISO 13485:2003 Health Canada
CMDCAS Recognized Registrar
JPAL Accreditation Certificate of
foreign medical device manufacturer
Zhermack, a major player in the global market,at the service of its local clients
ReliabilityPerformance durability and reliability over time are the strengths of each Zhermack product. From the meticulous choice of components to testing and functional inspections, each phase is followed with special care before marketing products.
Experience30 years of experience in designing advanced solutions
for the dental industry have enabled the creation of highly reliable systems for dental laboratories and
dental surgeries.
On-line assistanceAll technical Zhermack documentation is available at www.zhermack.com.Each product data sheet allows quick reference of key information and downloads of in-depth information material such as brochures, manuals, quick start guides and much more.
Zhermack by process:Our Quality Management System has been certified for more than 20 years according to ISO standards 9001 and
13485. Our Environmental Management System has been certified since 2001 according to ISO standard 14001.
Zhermack by product:Our products meet the requirements of EU Directives
(applicable to medical devices and equipments) and of the international rules of some of the main non-EEC countries
such as Russia, Brazil, China, Japan, Canada and USA.
BranchZhermack GmbH DeutschlandÖhlmühle 10 - D-49448 MarlTel. +49 - 0 54 43 / 20 33 - 0 Fax +49 - 0 54 43 / 20 33 - [email protected]
BranchZhermapolul. Augustöwka 1402 - 981 Warszawa - PolskaTel. +48 - 22 858 82 72 - 858 73 41Fax +48 - 22 642 07 [email protected]
BranchZhermack Inc.P.O. Box 4195River Edge, NJ 07661 - 4195Tel. +1 (877) 819-6206Tel. +1 (732) 389 8540Fax +1 (732) 389 [email protected]
Representative Offi ceZhermack UK and Ireland21 Balmoral RoadMelton Mowbray, LeicsLE13 1JNTel. (0)7870 [email protected]
Representative Offi ceZhermack Russia5/2 Marshala Vasilevskogo St.123098 Moscow - RussiaTel. +7 - 0916 [email protected]
Zhermack SpAVia Bovazecchino, 100 - 45021 Badia Polesine (RO) ITALY Tel. +39 - 0425 597611 Fax +39 - 0425 53596 [email protected] www.zhermack.com
12/2
009
F211
020/
A
06/2
011
Zhermack SpAVia Bovazecchino, 100 - 45021 Badia Polesine (RO) ITALY Tel. +39 - 0425 597611 - Fax +39 - 0425 [email protected] - www.zhermack.com
GERMANYZhermack GmbH DeutschlandÖhlmühle 10 - D-49448 MarlTel. +49 - 0 54 43 / 20 33 - 0 Fax +49 - 0 54 43 / 20 33 - [email protected]
POLANDZhermapol Sp. z o.o.ul. Augostówka 1402 - 981 Warszawa - PolskaTel. +48 - 22 858 82 72 +48 - 22 858 73 11Fax +48 - 22 642 07 [email protected]
USA Zhermack Inc.P.O. Box 4195, River Edge New Jersey 07661-4195Tel. +1 (877) 819 6206 +1 (732) 389 8540Fax +1 (732) 389 [email protected]
COUNTRY CONTACTS
UK and IrelandTel. +44 - (0) 7870 [email protected]
SpainTel. 900 99 39 [email protected]
FranceTel. 0800 - [email protected]
RussiaTel. +7 916 930 [email protected]
Mexico and Central AmericaTel. +52 - 1 - 55 - [email protected]
South AmericaTel. +57 - 310 - [email protected]
BRANCHES
EN
F300
081/
A
C A T A L O G U E2011
CA
TA
LO
GU
E 2
010/
2011