technologies

Revolutionizing

Fluid Condition Monitoring

Automate the Fluid Monitoring Process

Wireless and Configurable Sensor Technology

Fluid Vision Technologies will enable you to automate how metalworking fluids are monitored at your facility. The Fluid Vision Technology system is a configurable solution that enables insight to what’s most important to you: Concentration; pH; Conductivity and Dissolved Oxygen.

With sensors embedded in the metal working fluid tanks, data are automatically collected at chosen intervals and wirelessly sent to status display screens that can be located anywhere in the facility.

Now, the fluid condition of every asset can be reviewed within seconds, eliminating the manual time-consuming and expensive process of traditional fluid checks.

The result is the ability to automate fluid condition checks and consistently monitor accurate metalworking fluid readings, so that you can control costs.

Automate fluid monitoring process• Consistent and accurate fluid readings at pre-determined intervals• Wireless point to point data transfer

Monitor fluid readings • Immediate access to fluid readings at the machine• Shop floor status display increases visibility• Cellular access and remote monitoring capable

Control Costs• Lower labor costs• Reduce consumption and waste

technologies

Installation Steps:1. Shop-Floor Status Display - Connect HUB to any HDMI monitor 2. Configurable Sensor Pack - Attach Sensor pack to the tank below the fluid level line (magnetic backing attaches to metallic tank walls)3. Transceiver Unit - Attach transceiver next to the tank. It has a magnetic back and quickly attaches to any metallic surface4. Connect the sensor pack to the transceiver unit with a quick connector cable5. Turn on the transceiver6. Automatic data transfer begins

CORPORATE OFFICE Fluid Vision Technologies, LLC 311 N Market St #200 Dallas, TX 75202 T.(216)408-7417 www.fluidvision.co

Fast and Easy Installation and ServiceCustomized sensor packs allow you to choose the parameters you want to monitor.

Fluid VisionReading..

technologies

FLUID CONDITION CHECK

Wireless Shop-Floor Status Display

Color coded icons on the Shop Floor Status Display change color as the condition of the fluids fall out of range.

technologies

Automate MonitorControl

Visible Shop Floor Status Display View metalworking fluid conditions of every machine on a status display Hub located anywhere in the operating facility.

Remote Monitoring Access account fluid condition data from anywhere, anytime.

Wireless and Battery OperatedIndustrial grade wireless performance in a battery powered package.

ModularModular design enables fast and easy installation and service.

ScalableWith the Status Display in place, additional sensor packs arrive pre-calibrated and connect automatically.

Customized MonitoringFully configurable sensor packs; pH, concentration, dissolved oxygen and conductivity.

Wireless Transceiver Sensor Pack Inline

Hub