Zeus Touch QuickStart Guide

Overview

MARK

MOB

GOTOMENU PAGES

STBY

INMOBOUT

AUTO

SIMRAD

NSS 7

PUSH

TO ENTER

1 2 2 3

45

678910

No. Description

1 Touch screen

2 Chart card reader door

3 Micro-SD Card reader

4 STBY Auto key. Used for Autopilot operation

5 MARK / MENU key. A short press activates active panel’s menu. A long press places a mark at vessel’s position

6 X key. Used to close dialogs, to return to previous menu level and to remove the cursor from the screen on chart, radar and echosounder panels

7 Rotary knob. Used for zooming chart and for maneuvering in menus. Press Rotary knob to enter selection

8 GOTO / PAGES key. A short press displays the Pages (Home) panel. Repeated short presses toggles between Pages, Tools and Settings panels.

A long press displays the GoTo menu

9 IN / OUT key. Zoom key for chart, radar and echosounder panels. A simultane-ous press on both key ends will position a MOB at vessel’s position

10 Power key. Used for turning the unit ON/OFF and for brightness adjustment

Part no 988-10335-001, section 1 of 5

EN

2 | Zeus Touch | QuickStart Guide - EN

The power button

• Press and hold: Turn unit on/off

• Single press:Display dialog for light adjustment and standby mode

• Repeated presses:Toggle preset brightness levels

Displaying the menu

MARKMENU • Press button

• Tap screen area

• Press and hold on active panel

Positioning a Man Over Board mark

+

MOBIN

MOBOUT

¼ NOTE: Active AIS SART MOB devices will automatically trigger Man Over Board.

Cancel navigation Delete MOB mark

| 3 Zeus Touch | QuickStart Guide - EN

The Zeus Touch Control pages

GOTOPAGES

ToolsPages (Home) Settings

Selecting pages

GOTOPAGES

¼ NOTE: Select active panel on a multi-panel page by tapping selected panel.

Using chartsZoom Pan, any direction

20 nm

or

MOBIN

MOBOUT

4 | Zeus Touch | QuickStart Guide - EN

Placing waypoints

MARKMENU

2 s

At vessel position At cursor position

Creating routes

Displaying radar overlay on chart pages

Navigating

GOTOPAGES

2 s

¼ NOTE: This prompt will appear only with optional autopilot integration.

| 5 Zeus Touch | QuickStart Guide - EN

Using the EchosounderAdjusting sounder image

Auto - Manual

2 s

Select Auto/Manual Adjust

Using the radarTurning radar transmitting On/Off

Adjusting radar image

“Auto” - Manual

“Hrbr” - “Ofsh”

2 s

Select Select preset Adjust

6 | Zeus Touch | QuickStart Guide - EN

Using the AutopilotActivating the Autopilot

STBYAUTO

Returning to Standby mode and manual steering

A short press on the STBY/AUTO key switches the system to Standby mode.

Turning the Pilot pop-up ON/OFF

2 s

STBYAUTO

¼ NOTE: The Pilot pop-up must be ON to operate the autopilot.

Selecting autopilot mode from Pilot pop-up window

MARKMENU

STBYAUTO

| 7 Zeus Touch | QuickStart Guide - EN

Changing course in Auto mode

1° heading adjustHeading change

The Autopilot panel

Sailing with autopilot ¼ NOTE: Only available when Sail is selected during comissioning.

Maintaining a fixed wind angleAdjust the boat heading until wind is according to selected wind angle, then:

MARKMENU

Tacking

MARKMENU

8 | Zeus Touch | QuickStart Guide - EN

SailSteer screenSailSteer provides a composite view of key sailing data.

The StructureScan™ panel ¼ NOTE: Only available when StructureScan is detected on the network.

Selecting views

Layline setup

Adjust Manual Target Wind Angles

TWA indicator

Green: on target

Blue: off target (or on a reaching leg)

Layline max/min indicators