yunasko presentation at global cleantech summit 2016
TRANSCRIPT
YUNASKO
THE MOST POWERFUL ENERGY STORAGE
NEEDS FOR ENERGY STORAGE AND HARVESTING
▶ No CO2 emission reduction possible without storage ▶ No electric vehicles possible without storage ▶ No renewables possible without storage ▶ No smart grids possible without storage
BATTERY CHALLENGES – OPPORTUNITY FOR ULTRACAPACITOR -
▶ Low charge / discharge rate (long time to charge)
▶ Safety concerns (fire hazard)
▶ Short lifetime (expensive to change)
▶ Low and high temperature intolerance
▶ Low efficiency (heat generation requires expensive thermal management systems)
PARAMETER
BATTERY
ULTRACAPACITOR
Energy Density 100Wh/kg 10Wh/kg
Power Density 1kW/kg 10kW/kg
Efficiency ~80% >90%
Cyclability 400 – 2500 1,000,000
Calendar life Short (4..6 years) Long (15+ years)
Low Temperature -20°C -40°C
High Temperature +60°C +100°C
Death Sudden Predictable
Principle Electrochemical Electrostatic
Cost 0.07 - 0.2 $/kWh/cycle $0.006 $/kWh/ cycle
BATTERY VS ULTRACAPACITOR VS
Ultracapacitors are all about power, unlimited cycling, safety and predictable life. This is super reliable short term energy storage. Ultracapacitors are at least 10 times less expensive than batteries for frequent cycling application
10
YUNASKO PRODUCT MIX ▶ Ultracapacitor modules: modules for various applications (16V – 112V)
▶ Ultracapacitor cells: power and energy type ultracapacitor cells (300F - 3000F)
300F-3000F
▶ Electrodes: power and energy type electrodes
112V 28F module 16V 500F module
MARKET NICHES – HIGH POWER APPLICATIONS -
▶ Hybrid and PHEV buses ▶ Light trains ▶ Wind and solar power ▶ Start / stop systems for cars ▶ Energy recovery in hybrid cars (regenerative braking) ▶ Large engine cold cranking (trucks, diesel locomotives) ▶ Frequency and peak shaving in electrical grids YUNASKO 48V 165F module
YUNASKO TECHNOLOGY ADVANTAGE
Low internal resistance resulting in:
3-5 times higher power than anyone else on the market à lower weight and cost of the system
3-5
2 times more available energy à deliver more energy within time interval up to 6s and/or high current/power rate 2 6 /
/ 3 times lower heat generation à no active cooling required, improved safety
3
POWER CONVERTS TO MONEY
8
INDEPENDENT TESTS OF ULTRACAPACITORS
(as tested by Dr. Dennis Corrigan, Wayne State Univ., Detroit)
YUNASKO is 5X more powerful than the closest competitor 5
TECHNOLOGY IS READY FOR THE MASS PRODUCTION
Materials performance: simplest ultracapacitor cells built to show performance
Prototype performance: large cells (>400F) that maps to modules
>400F
Device performance: pilot plant production rate reached 1000 large cells/year with yield over 90%
100090%
Product performance: ultracapacitor cells and modules sold to customers
Unit economics: mass scale production
STEPS COMPLETED
2016
2015
2012-2014
2010-2012
2010 Idea
Investment needed for the next step –
launch ultracapacitor
factory in China.
China license deal for 4M cells/year planned production inked in 2013
2013400
STATE OF THE ART WESTERN TECHNOLOGY
▶ Close to the customers: Energy storage market in China is currently the biggest in the world and tends
to grow further ▶ Short ‘time-to market’: factory ready, machines procured, installed and tested, staff trained by Yunasko ▶ Close to the vendors: main raw materials vendors located in Asia, we also found reliable equipment
vendors in China ▶ Low cash burn: All major competitors run expensive R&D and production in Europe, USA or Japan.
YUNASKO will have low cash burn R&D in Ukraine and China and low cost manufacturing in China. This is a significant competitive advantage
+ STATE OF THE ART CHINESE MANUFACTURING
CORE TEAM
Dr. Natalia Stryzhakova,
2060
15
Dr. Yurii Maletin
20
Dr. Dmitriy Tretyakov,
14
40
Vitaliy Shuster,
30
Dr. Sergii Tychina,
Vadim Utkin,
CEO
MBA
Vadim Utkin CEO +380 67 445 3713
[email protected] Yunasko.com
Sergii TYCHINA Project Manager +380977461695 [email protected] yunasko.cn