Model # MC1

YOUTH METALD E T E C T O R

602 Fountain ParkwayGrand Prairie, TX 75050800.847.8269

“Ground EFX” and “Cyclone” are TM trademarks of WGI Innovations, LTD.“Sport Responsible” is a TM trademark of WGI Innovations, LTD.

User’s Manual

llllllllllllllllllllllllllllllllll

lllllll

lllll

lllllll

lllllllllllllllllllllllllllllllllllllll

lllllllllllllllll

lllllll

llllllllllllllllllllll

lllllll

lllllllllllllllllllllllllllllllllllllll

llllllllllllllllllllllllllllllllll

lllllll

lllll

lllllll

llll

lllllllllllllllllllllllllllllllllll

Turn ON Rotate left knob to click power to the unit

Battery Test To test battery, rotate right knob counter-clockwiseuntil it clicks while the unit is powered ON. The needleon the Target Indicator should move to BATT OK.

Adjust Sensitivity Rotate left knob clockwise to increase sensitivity (Reduce sensitivity if the detector emits false signals; the detector is probably reacting to electromagnetic interference for the soil

Installing Batteries Open the battery door by undoing the door latch. Place the 9V batteries in the compartment and attach the connectors to the batteries. Latch the door closed. Do not use Heavy Duty batteries or Zinc-Carbon batteries. Do not mix old and new batteries.

Adjusting Length Lift the handle latch located on the tube. Extend thetube to the desired length. Lock the handle latch back intoplace to secure.

Assembly Remove the plastic bolts on the top of the coil. Fit the rod inside the bracket on thecoil. Insert the plastic bolts into the bracket and through the bottom rod. Then tighten but do not over tighten.

Door Latch

Handle Latch

Battery Connectors

llllllllllllllllllllllllllllllllll

lllllll

lllll

lllllllllllllllll

lllllll

llllllllllllllllllllll

Eliminator Rotate right knob clockwise to eliminate unwanted metals from detection. As the right knob is turned clockwise, metals are progressively being eliminated from detection. Refer to the scale for the relative positions at which di�erent types of metal are eliminated.

Pinpointing Once a buried target is identi�ed by a good target indicator or tone response, continue sweeping the coil over the target in an “X” pattern. Make a visual note of the place on the ground where the tone is heard from both directions. Then dig in the center of the “X”.

Directions1. Turn the left knob clockwise to turn the unit on2. Make sure the elimination knob is clicked to the right , not in battey test mode.3. Keep the coil parallel to the ground4. Keep the coil about 1/2” o� the ground5. Use the detector Outdoors Only6. Adjust sensitivity down if false readings happen often.6. Some objects like gold and nickel can be eliminated from detection in the middle of the eliminator range. 7. Only the coil and rod are able to be under water. Do not submerge the rest of the unit.8. Observe all laws (national, state and local) and re�ll your holes.

lllllll

llll

lllllllllllllllllllllllllllllllllll

Iron

NoElimination

Small GoldObjects

Large GoldObjects/Silver

BatteryTest

Zinc

Nickel,Pull Tabs

DISCLAIMERSWGI Innovations, LTD is not responsible for damage, expense or injury caused by the unauthorized use of, alterations to, improper connection of and abuse or neglect of the WGI Innovations™ products.

WARRANTYYou must register your product warranty online at www.wildgameinnovations.com. Follow the onscreen directions to complete the process.WGI Innovations, LTD will replace any product that may encounter material or workmanship defects free of charge for ONE (1) YEAR after the date of purchase and thereafter the cost will vary per incident.

This warranty DOES NOT COVER damage, expense or injury caused by unauthorized repairs, alterations, improper connection, shipping, abuse, theft, accident, neglect or collateral loss.

When returning product for service you MUST obtain a Return Merchandise Authorization (RMA) number from WGI Innovations, LTD. Please include name, UPS address (no P.O. Box), telephone number, RMA number and a complete description of the problem on all enclosed correspondence.When possible, pack product carefully in original carton. Customers are responsible for any shipping cost to WGI Innovations™. WGI Innovations will pay shipping cost of replacement product to the customer. We are not responsible for damage incurred in returning items for repair.

CUSTOMER SERVICE WGI Innovations, LTD stands behind every product we manufacture for a one year product workmanship warranty and a strong commitment to customer service. If you are in need of customer service for missing parts or need assistance with the operation or assembly of your product, we encourage you to call one of our customer service representatives and let us assist you with your WGI Innovations™ product.

DISCLAIMERWGI Innovations, LTD reserves the right to make changes to product features, functionality and physical design at its sole discretion. As a result, such changes may not be re�ected in this version of the manual.

FCC STATEMENTProduct Name: Metal DetectorTrade Name: Ground EFX Model# MC1

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two criteria: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modi�cations to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o� and on, the user is encouraged to try to correct the interference by one or more of the following measures:-Reorient or relocate the receiving antenna.-Increase the separation between the equipment and receiver.-Connect the equipment into an outlet on a circuit di�erent from that to which the receiver is connected.-Consult the dealer or an experienced radio/TV technician for help.