xVue Touch™ Your Solution for Experimental Aircraft

Your Solution for Experimental AircraftThe xVue Touch™ offers a fast, simple and powerful integrated flight deck with superior craftsmanship for your homebuilt aircraft. The xVue Touch is a primary flight display for a new homebuilt aircraft or a replacement for outdated 6-pack flight displays. The system provides a 10.1" WUXGA 1900 X1200 touch screen smart display, high performance air data, attitude and heading reference system, magnetometer and outside air temperature probe. The display can be used as a full screen Primary Flight Display or split screen Primary Flight Display/Multifunction Display. The system comes standard with our industry-leading SmartView™ synthetic vision system, and ADS-B in traffic and weather display.

Find Out More To learn more, call 1.855.250.7027, contact your local BendixKing dealer or visit bendixking.com

BendixKing 9201-B San Mateo Blvd. NE

Albuquerque, NM 87113

BendixKing.comA60-1613-000-000 | 4 /18 © 2018 BendixKing

Database Upload: Over Wifi and USB-C

Primary Flight Display

Characteristics Specification

Dimensions 6.897 x 10.45 x 4.08 in. (175.18 x 265.43 x 103.63 mm)

Mounting Information Front mount

Weight 7.59 lbs. (3.44 kg)

Current Draw Typical: 1.33 AMP for 28 VDC | 2.66 AMP for 14 VDC

Operating Voltage 9.0 to 30.3 VDC

Circuit Breaker 2 AMP for 28 VDC, 3 AMP for 14 VDC

Cooling Convection cooled (no fan)

Connectors 1 female 78-pin and 1 male 78-pin

Viewing Angle Envelope 80° from all directions

Control Panel

Characteristics Specification

Dimensions 1.48 x 6.25 x 3.67 in. (37.6 x 158.8 x 93.2 mm)

Mounting Information Front mount

Weight 1.05 lbs. (0.47 kg)

Current Draw Powered from flight display. Current draw included with flight display

Operating Voltage Provided by flight display

Circuit Breaker None, uses circuit breaker for flight display

Cooling Convection cooled (no fan)

Connectors Male 9-pin D-Sub

Magnetometer

Characteristics Specification

Dimensions 3.70 x 5.83 x 1.33 in. (93.98 x 148.08 x 37.78 mm)

Weight 0.90 lbs. (0.41 kg)

Temperature -55 °C to +70°C

Altitude 55,000 ft.

Operating Voltage 9.0 to 30.3 VDC

Current Draw (at 27.5 VDC)

80 mA Nominal, 25°C, after 2 minute warmup

200 mA Nominal, -55°C, after 2 minute warmup

700 mA Maximum, -55°C

Circuit Breaker 1 AMP for 28 VDC, 2 AMP for 14 VDC

Signal Inputs/Outputs Serial CAN bus

Cooling Convection cooled (no fan)

Connector Female 9-pin

Air Data Attitude Heading Reference System (ADAHRS)

Characteristics Specification

Dimensions 8.65 x 5.1 x 1.4 in. (219.72 x 129.43 x 35.56 mm)

Weight 2.17 lbs. (0.98 kg)

Current Draw Typical: 0.2 AMP for 28 VDC | 0.4 AMP for 14 VDC

Operating Voltage 9.0 to 30.3 VDC

Circuit Breaker 2 AMP for 28 VDC, 3 AMP for 14 VDC

Cooling Convection cooled (no fan)

Connectors Male 50-pin and Female 9-pin (maintenance port)

Outside Air Temperature Probe (OAT)

Characteristics Specification

Dimensions 1.65 x 1.75 x 1.00 in. (41.91 x 44.45 x 25.4 mm)

Weight 0.15 lbs. (0.07 kg)

Current Draw None, no interface to aircraft power

Operating Voltage None, connected to ADAHRS, no interface to aircraft power

Circuit Breaker None

Cooling No cooling required

Connectors 5 ft. 3-conductor shielded wire lead, spliced into wiring harness