your safety - shipserv.com pyrad... · • norsok s-002 working environment -> iso 11079 •...

11

Your safetyIS OUR TOP PRIORITY

EN 1149 EN 13034 EN 343 IEC 61482 EN 11611 EN 11612 EN 20471

PYRAD ARCTIC PROTECTIONUPDATED JUNE 2018

33

DOUBLES EXPOSURETIMES IN THE NORTHPyrad Arctic Protection

Pyrad Arctic Protection is a brandnew type of workwear that allowsplatform workers in arctic regionsto stay outdoors twice as long astoday’s clothing.

The Norwegian petroleum industry is steadily movingnorth, and this shift presents a significant challenge,which soon became top priority for our product de-velopers in Måndalen: The combination of low tempe-ratures and strong winds will make safe and ef ficientworking operations even more challenging than in theNorth Sea.

in the last year, we have together with SINTEF, Statonand Eni Norge, sent test subjects in and out of physio-logical chambers - where temperatures are lowerthan -25oC - to investigate what is required to keepplatform workers in these northern regions stay warmenough. Evolving prototypes have been tested inactual platform working conditions.

The result of the research project, which was suppor-ted by the Research Council of Norway, is a brandnew collection.

Pyrad Arctic Protection comprises a jacket, trousersand boots made in a Gore-Tex Pyrad material with20% higher tear strengths than the previous Pyrad. Itremains waterproof and breathable, and is the lightestelectric-arc approved shell layer on the market. Usertests and laboratory tests at SINTEF, document thatthose working on platforms in the arctic regionscan remain outside twice as long with Pyrad ArcticProtection, compared with today’s clothing. The newgarments allow you to use less mid-layer clothinggiving you greater comfort and more freedom ofmovement, with a higher lever of protection.

44

• NORSOK S-002 Working Environment -> ISO 11079

• Recommendations in accordance to recommended exposure time for outdoor work based on wind chill temperature

• Clothing that has been documented to meet requirements / guidelines

• Wind chill temp. (WCT) - Apparent Temperature - calculated from wind speed and air temperature. - Relevant to the risk of frostbite to exposed skin

WCT °C CHANCE OF FROSTBITE DURATION OF EXPOSURE PREVENTATIVE MEASURES

10 til -9

COOL

0: Low risk

< 5% chance of frostbite

Unlimited - Dress warmly- Stay dry- Use caution if performing tasks onlywith the hands

-10 til -24

COLD

1: Low risk

< 5% chance of frostbiteFeels uncomfortable to most

40-120 min - Warm clothes, where the shell layer is wind and waterproof

- Headgear, gloves, scarf and insulating waterproof footwear

- Stay dry, warm and active- Use caution if performing tasks only

with the hands

-25 til -34

UNCOMFORT-ABLY COLD

2: Moderate risk of frostbite

Increased risk of frostbitewithin 10-30 mins

Extremely cold

10-30 min - Warm clothes, where under layers and shell layer are wind and waterproof

- Minimise unprotected skin (balaklava and glasses)

- Headgear, gloves, scarf, face protection, insulated and waterproof footwear

- Stay dry, warm and active- Take breaks with hot drinks- Check face, hands and feet for

numbness and whitening

-35 til -59

EXTREMELYCOLD

3: High risk

Extremely cold. Frostbitewithin 0-10 min

0-10 min - Warm clothes, where under layers and shell layer are wind and waterproof

- Protect all areas of skin- Headgear, gloves, scarf, face protection,

insulated and waterproof footwear- Stop work after a short period of time,

consider postponing planned activity- Stay dry, warm and active.

GUIDELINES

55

SHELL LAYER MID LAYER BASE LAYER

STILLESTÅENDE ARBEID AKTIVT ARBEIDLett arbeidet med lav arbeidsintensitetF.eks; lett manuelt arbeidet, befaringer, inspeksjoner, med en fart opp til 3,5 km/tPuls up til 90

Tungt arbeidet med moderat til høy arbeidsintensitetTyngre arbeidet, bæring, flytting av materialer/masse, hurtigere gange over 5,5 km/tPuls 110-130

PARKA PARKAVEST VEST0-56850-198190-26850-19819 0-100-177 0-251-277 0-251-277 0-100-177

0-1228-1200-1100-120

0-1228-1200-1100-120

0-56850-198190-26850-19819

SHELL LAYERMID LAYERBASE LAYER

COOL TO COLD: EFFECTIVE TEMP. +10 TO -24°C

UNCOMFORTABLY COLD: EFFECTIVE TEMP. -25 TO -34°C

EXTREMELY COLD: EFFECTIVE TEMP. -35 TO -59°C

WCT

WIND FORCE WIND SPEED AIR TEMP °C

BEAUFORT SCALE (m/s) Km/h m/s 0 -5 -10 -15 -20 -25

LIGHT BREEZE (1.6- 3.3)5 1.4 -2 -7 -13 -19 -24 -30

10 2.8 -3 -9 -15 -21 -27 -33

GENTLE BREEZE (3.4- 5.4)15 4.2 -4 -11 -17 -23 -29 -35

20 5.6 -5 -12 -18 -24 -31 -37

MODERATE BREEZE (5.5- 7.9)25 6.9 -6 -12 -19 -25 -32 -38

30 8.3 -7 -13 -20 -26 -33 -39

FRESH BREEZE (8.0- 10.7)35 9.7 -7 -14 -20 -27 -33 -40

40 11.1 -7 -14 -21 -27 -34 -41

STRONG BREEZ (10.8- 13.8)45 12.5 -8 -15 -21 -28 -35 -42

50 13.9 -8 -15 -22 -29 -35 -42

STATIONARY WORK ACTIVE WORKHeavy work with moderate to high labor intensityeg. carrying, moving materials,Speeds over 5.5 km/hPulse rate 110-130 bpm

Light, low-intensity work,eg. light manual work, inspectionsSpeeds up to 3.5 km/hPulse rate up to 90 bpm

66666

EN 1149 EN 13034 EN 343 EN 11611

DETACHABLE HOOD

PANELfor attaching radio

communication

EN ISO 20471, CL. 3 Approved electric arc EN 61482-1-2 cl.2

Arc rating EBT50: 49,1 cal/cm2SHAPED ELBOW

MAP POCKETwith pennpocket on

the inside coveredby zipper

REGULATIONIN SLEEVE

GORE-TEX MEMBRAN

ADJUSTABLE HEM

SLEEVE POCKET

PLASTIC ZIPPER

POCKETSWITH ZIPPER

PLASTIC ZIPPER.

THIGHT POCKET

EN ISO20471,CLASS 2

KNEE PAD POCKET

SHAPED KNEES

REFLECTIVETAPES ON LEG

ADJUSTABLELENGTH IN LEG

ADJUSTABLEAND REMOVABLEBRACES

BUTTON

BELT LOOPS

GORE-TEX JACKET AND TROUSERPYRAD ARCTIC PROTECTION

EN 11612 EN 20471IEC 61482

7

PYRAD - ARCTIC PROTECTION

0-56830-19819-3205 GORE-TEX JACKET ARTIC PROTECTIONAdditional reflectors on shoulder. Detachable hood with adjustment cap with room for helmet. Zipper hidden under storm flap in the front. Adjustment in hem. Fixture for radio on chest and waist. Two breast pockets with hidden zippers and D-ring. Map pocket with zip, mobile phone pocket and pen pocket inside the map pocket. Two front zippe-red pockets. Ermlomme flap. Velcro adjustment in closing the sleeve. Zipper in lining for simplified embroidery and application of logo.

COLOR 3205 Yellow fluorescent/Navy

SIZE XS-XXXL

STANDARD EN 1149-5: 2008, EN ISO 20471:2013 XS-S cl. 2 og M-> cl. 3, EN ISO 11612:2015 A1+A2 B1 C1 D3 E1 F1, IEC 61482-2:2009, Etb50 49,1 cal/cm2, HAF:94,8, cl. 2 (7 KA ), EN ISO 11611:2015 cl. 2 A1+A2, EN 343:2003+A1:2007 cl. 3.3 EN 13034:2005+A1:2009 Type PB(6)

MATERIAL Outer fabric/contrast, Gore Ebro 2L: 99,4% polyester, 0,6% Car-bon with Gore Pyrad Fabric tecnology Bicomponent membrane based on ePTFE, 215 g/m2. For: 100% PKM, 160 g/m2. Mesh: 100% Meta Aramid, 105 g/m.

0-26850-19819-3205 GORETEX TROUSER PYRAD ELECT.ARCDetachable and elastic braces with adjustment. Flap over zip fly that closes with Velcro. Two zippered thigh pockets. D-ring under flap. Tomstokklomme. Two-way zipper in the trouser legs hidden under flap that closes with Velcro. Adjustment hem. Knee pad. Zipper in lining for simplified embroidery and application of logo.


SIZE XS-XXXL

STANDARD EN 1149-5: 2008, EN ISO 20471:2013, cl. 2 Bukse + jakke cl. 3, EN ISO 11612:2015 A1+A2 B1 C1 D3 E1 F1, IEC 61482-2:2009, Etb50 49,1 cal/cm2, cl. 2 (7 KA ), HAF:94,8, EN ISO 11611:2015 cl. 2 A1+A2, EN 343:2003+A1:2007 cl. 3.3 EN 13034:2005+A1:2009 Type PB(6)

MATERIAL Outer fabric / contrast, Gore Ebro 2L: 99.4% polyester, 0.6% Carbon with Gore Pyrad Fabric tecnology Bicomponent membra-ne based on ePTFE, 215 g / m2: 100% PKM, 160 g / m2

0-56850-19819-3205 GORETEX JACKET PYRAD ELECTR. ARCAdditional reflectors on shoulder. Detachable hood with adjustment cap with room for helmet. Zipper hidden under storm flap in the front. Adjustment in hem. Two breast pockets with hidden zippers and D-ring. Map pocket with zip, mobile phone pocket and pen pocket inside the map pocket. Two front zippered pockets. Ermlomme flap. Velcro adjustment in closing the sleeve. Zipper in lining for simplified embroidery and application of logo.COLOR 3205 Yellow fluorescent/Navy

SIZE XS-XXXL

STANDARD EN 1149-5: 2008, EN ISO 20471:2013 XS-S cl. 2 og M-> cl. 3, EN ISO 11612:2015 A1+A2 B1 C1 D3 E1 F1, IEC 61482-2:2009, Etb50 49,1 cal/cm2, HAF:94,8, cl. 2 (7 KA ), EN ISO 11611:2015 cl. 2 A1+A2, EN 343:2003+A1:2007 cl. 3.3 EN 13034:2005+A1:2009 Type PB(6)

MATERIAL Outer fabric / contrast, Gore Ebro 2L: 99.4% polyester, 0.6% Car-bon with Gore Pyrad Fabric tecnology Bicomponent membrane based on ePTFE, 215 g / m2: 100% PKM, 160 g / m2 Mesh: 100% Meta Aramid , 105 g / m

8


0-80930-19819-3205 GORE-TEX COVERALL ARCTIC PROTECTIONThis model has a standing collar, removable and adjustable hood with a space for a hel-met. Hidden two-way zipper under the flap at the front and on the legs. Elastic in waist, adjustable arms, and legs. Loop for radio and gas meter. Chest pockets, hip pockets and map pocket with zipper, tool pocket, inner pocket and loop with a hook inside left chest pocket. Reflex on body, arms, legs, and shoulders.


SIZE XS-XXXL

STANDARD EN 1149-5: 2008, EN ISO 20471:2013 cl. 3 EN ISO 11612:2015 A1+A2 B1 C1 D3 E1 F1, IEC 61482-2:2009, Etb50 49,1 cal/cm2, HAF:94,8, cl. 2 (7 KA ), EN ISO 11611:2015 cl. 2 A1+A2, EN 343:2003+A1:2007 cl. 3.3 EN 13034:2005+A1:2009 Type PB(6)

MATERIAL main and contrast fabric: Gore Ebro 2L: 99.4% polyester, 0.6% Carbon with Gore Pyrad Fabric tecnology Bicomponent membra-ne based on ePTFE, 215 gr./m2: 100% PKM, 160 gr./m2 Mesh: 100% Meta Aramid, 105 gr./m2

0-54130-19104-32 WAISTCOAT ARCTIC PROTECTION 2 sized lined vest with extra extended zipper closure. Reflex tape on shoulder and body.Radio loop on the left chest, and opening for radio at the lower back.

COLOR 32 Fluoriserende gul

SIZE XS/S-XL/2X

STANDARD EN ISO 20471:2015 cl. 2, EN ISO 14116:2015, Outer face index 1, inner face index 3

MATERIAL Main fabric: 98% polyester 2% Carbon + PU coated, 260 g/m2Contrast fabric: 50% Protex, 41% Cotton, 7% polyurethane, 2% antistatisk, 260 g/m2Lining/padding: 100% Cotton, 100% polyester, 480

0-35172-7000-3205 MULTINORM T-SHIRT, LONG SLEEVEReflective tape on the shoulder. Ribbed elasticated neck, hem and around sleeves. 5 cm wide opening between the reflectors on the sides for extra comfort and freedom of movement.


SIZE XS-4XL

STANDARD EN ISO 11612 A1 B1 C1, EN 1149-5, IEC 61482-2, ATPV 5,9 cal/cm2 class 1 (4 KA ) EN ISO 20471 cl. 2 (SIZE XS-S) cl. 3 (SIZE M-3XL)

MATERIAL 60% modacrylic, 37% cotton, 3% antistatic fiber, 230 g/m²

9


0-35272-7100-3205 SWEATSHIRT MULTINORMReflective tape on the shoulder. Ribbed elasticated neck, hem and around sleeves. 5 cm wide opening between the reflectors on the sides for extra comfort and free-dom of movement


SIZE XS-XXXL

STANDARD EN ISO 11612 A1 B1 C1, EN 1149-5, IEC 61482-2 ATPV 21,3 cal/cm2 class 1 ( 4 KA )EN ISO 20471 cl. 2 (SIZEXS-S) cl.3 (SIZEM-3XL)

MATERIAL 60% Modacrylic, 37% Cotton, 3% antistatic fibers, 400 g/m2

0-35572-7200-3205

0-35273-7100-3205

FLEECE JACKET MULTINORM

SWEATER WITH ZIPPER MULTINORM

The garment has Extra reflex on shoulder. Hidden zipper under the front flap. Adjustment at the bottom. one chest pocket. Two front pockets with zipper. Thumb Grip at the end of the sleeve.

This model has long sleeves, elastic ribs in sleeves and waistband, standing collar, hidden zipper under the front list. 1 chest pocket with hidden zipper. Reflex on torso, shoulders and sleeves.

COLOR

COLOR

3205 Yellow fluorescent/Navy

3205 Yellow fluorescent/Navy

SIZE

SIZE

XS-4XL

XS-XXXL

STANDARD

STANDARD

EN ISO 11612 A1, B1, C1, F1EN ISO 20471 cl.3,ICE 61482-2 EBT50 6,9 Cal/cm2 class 1 ( 4 KA ) EN 1149-5

EN ISO 20471:2013 XS-S cl. 2, M-> cl.,EN ISO 11612:2015, A1, B1, C1, EN 1149-5,MATERIAL godkjent for IEC 61482-2:2009 Cl. 1 (4KA ) EBT50 19,6 cal/cm2

MATERIAL

MATERIAL

Main fabric: 50% Modakryl, 30% bomull, 18% polyester, 2% anti-static, 370 g/m2. Contrast 1: 45% Modakryl, 35% bomull, 18% polyester, 2% antistatic, 300 g/cm2. Contrast 2: 54% PPAN, 44% bomul, 2% antistatic, 240 g/cm2

Main fabric: 60% Modacryl, 37% bomull,3% Beltron. 405g/m2. Contrast fabric:60% Modacryl, 38% bomull,2% Beltron, 405 gr. cm2

10

Increased protection

Effectively transfers moisture away from the skin

Excellent insulation

Highly comfortable

PROPERTIES

10

11

CHOOES THE CORRECT WORKWEAR

Wearing the correct underwear andmid layers increase comfort and enhances the protection against multiple hazards.

Your working environment, level of activity and climate will all determine which underwear and mid layers should be used. Our base layer collection is therefore adapted to any work environment, whet-her it be a summer road project or a rig operating in an Arctic winter gale.

To provide the right protection when risk is at its hig-hest, we offer anti-flame underwear and mid layers. Manufactured by Devold® Protection and when worn in combination with Wenaas flame retardant workwear, offer enhanced protection.

Like Wenaas, Devold® is actively engaged in rese-arch and testing. This research work has taken us to North Carolina State University USA, for the so-called Manikin Burn Test. In this test, a manikin is fitted with 150 heat sensors and was dressed in the Wenaas Offshore range together with underwear. The manikin is then exposed to a flash fire for four seconds.

The sensors measure the transfer of heat to the skin tissue and predicts the level of 2nd or 3rd degree burns. The results provide an indication of the level of burns on the body, where 50% entails a large risk of life getting lost.

The Wenaas Offshore range was first tested in combi-nation with cotton underwear, then with the Devold® Spirit flame retardant underwear. The results showed that wearing the Devold® flame retardant underwear reduces the extent of 2nd and 3rd degree burns signi-ficantly compared to standard cotton underwear.

In addition to burns there may also be scolding injuries due to moisture. It is therefore extremely important to wear flame retardant underwear that has good moisture transportation properties.

2ND DEGREE BURNS 44% 16%

3RD DEGREE BURNS 8% 7%

TOTAL BURNS 52% 23%

NORMAL UNDERWEAR

FLAME-RETARDANT UNDERWEAR

35.25%

SOURCE: DEVOLD® PROTECTION

TOTAL BURNS AND SHARE 2ND AND 3RD DEGREE BURNS

Lorem ipsum

Lenzing viscose fiber increases comfort and eliminates ”itchiness” that some experience with wool

The body stays warm

The skin stays dry and comfortable

Reduces the risk of 2nd and 3rd degree burns

ADVANTAGES

11

12


0-1240-120-10 DEVOLD SPIRIT SHIRT ZIP NECKFlame resistant. Tight, zip neck, long sleeve. Double knitted in merino wool on outside and comfortable Lenzing FR® on inside. Grey contrasting colour in side.

COLOR 10 Black

SIZE XS-5XL

STANDARD EN ISO 11612 A1 A2 B1 C1, EN 61482-1-2 cl.1

MATERIAL 50% Lenzing FR, 50% Merino wool, 230 g/m2.

0-1228-120-10 DEVOLD SPIRIT SHIRTFlame retardant. Fitted, rounded neck, long sleeve. Double knitted in merino wool on outside and comfortable Lenzing FR® close to the skin. Grey contrasting colour in sides.

COLOR 10 Black

SIZE S-5XL

STANDARD EN ISO 11612 A1 A2 B1 C1, EN 61482-1-2 cl. 1

MATERIAL 50% Lenzing FR, 50% Merino wool. 230 g/m2.

0-1219-120-10 DEVOLD SPIRIT T-SHIRTAntiflame. Fitted, rounded neck, short sleeves. Double knitted in merino wool on outsi-de and comfortable Lenzing FR® on inside. Grey contrasting colour in sides.

COLOR 10 Black

SIZE S-XXXL


MATERIAL 50% Lenzing FR, 50% Merino wool. 230 g/m2.

13


0-1100-120-10 DEVOLD SPIRIT LONG JOHNSFlame resistant. Tight. Wide elastic band in waist. Double knitted in merino wool on outside and comfortable Lenzing FR® on inside. Contrasting colour in seams.

COLOR 10 Black

SIZE S-5XL


MATERIAL 50% Lenzing FR, 50% Merino wool, 230 g/m2

0-251-277-10 DEVOLD THERMAL JACKET ANTISTATICZipper in front - up to collar, side panels, thumb grip. Protects against radiant heat, cold temperatures, metal splash and flames.Exterior is smooh to provide optimum protecti-on. Brushed inside for optimum insulation.

COLOR 10 Black

SIZE XS-XXXL

STANDARD EN 11612 A1 A2 B1 C1 ,EN 61482-1-2 cl.1 , EN 1149-5

MATERIAL 98% Pure New Wool, 2% NEGA-STAT, 470 g/m2

0-100-177-10 DEVOLD THERMAL LONG JOHNSElastic waist, ribbed lower leg. Provides good protection against cold, radiant heating, flames, and metal splash. Exterior is smooth to provide optimum protection. Inside is brushed for maximum insulation.

COLOR 10 Black

SIZE XS-2XL


MATERIAL 100% Pure New Wool, 470 g/m2

14


0-1818-120-10 DEVOLD SPIRIT BALACLAVAFlame retardant. Covers head and neck. Double knitted with merino wool on outside and comfortable Lenzing FR® garment on inside. Grey contrast colour in front.

COLOR 10 Black

SIZE STK

STANDARD EN ISO 11612 A1 A2 B1 C1, EN 61482-1-2.


0-840-120-10 DEVOLD SPIRIT HEADOVERFlame resistant. Can be folded and used as a scarf. Double knitted in merino wool on outside and comfortable Lenzing FR® on inside.

COLOR 10 Black

SIZE STK



0-1146-269-10 DEVOLD SAFE BOXERSHORTSFlame retardant. Fitted. Wide elastic in the waist. Lenzing FR® and merino wool with enforced polyamide. Contrastive stitching.

COLOR 10 Black

SIZE S-XXXL

STANDARD EN ISO 11612 A1 A2 B1 C1, EN 1149-5, EN 61482-1-2 cl.1

MATERIAL 50% Lenzing FR, 40% Merino wool, 8% Poyamid, 2% NE-GA-STAT, 230 g/m2

15


0-200-116-10 DEVOLD SAFE BRAAntiflame. Sports Bra model, broad elastic band in hem. Knitted from Lenzing FR® and merino wool, with reinforcement in polyamide. Highly elastic - will follow body movements.

COLOR 10 Black

SIZE S-XXL

STANDARD EN ISO 11612 A1 A2 B1 C1, EN 1149-5, EN 61482-1-2 cl.1

MATERIAL 50% Lenzing FR, 40% Merino wool, 8% Polyamide,1% Elastan, 1% NEGA-STAT, 230 g/m2

0-110-269-10 DEVOLD SAFE LONG JOHNS LADYLongs Lady FR Devold Safe. Safe is knitted with Lenzing and merino wool. Nega-Stat is implicated for antistatic protection. Safe is a light, rib knitted flame retardant underwear. It keeps your body dry even during high activity.

COLOR 10 Black

SIZE XS-XL

STANDARD EN ISO 11612 A1 A2 B1 C1, EN 1149-5, EN 61482-1-2 cl. 1

MATERIAL 50% FR Lenzing®, 40% Merino wool, 8% polyamid, 2% NEGA-STAT

16


DEVOLD® SPACERNEW ITEM – INNOVATION

– Revolutionary insulation - light weight– Spacer creates air pocket in garment to give better insulation– Spacer technology offers an extremely high heat-to-weight value– Good temperature control, optimum moisture transport, dries quickly

17


0-821-120-10 HEADOVER SPIRIT WINDPROOF

COLOR 10 Black

SIZE STK

STANDARD EN 11612 A1

MATERIAL 50/50% Wool (Merino) Lenzing fr.

0-130-310-110 PANTS SPACER

COLOR 110 Anthracite

SIZE XS-XXXL

STANDARD ISO 11612 A1A2B2C2, EN1149-5, EN61482 cL1

MATERIAL 35 Lenzing/30 Polyester/28 Wool SW/6 Polyamid/1 Nega-stat

0-251-310-110 JACKET SPACER

COLOR 110 Anthracite

SIZE XS-XXXL

STANDARD ISO 11612 A1A2B2C2, EN1149-5, EN61482 cL1

MATERIAL 35 Lenzing/30 Polyester/ 28 Wool SW/6 Polyamid/1 Nega-stat

18


0-75-856-10 SHOE OILMASTER S3Shoes that are ESD approved, with uppers of full grain leather. It is lined with 3M Thin-sulate ™, which insulates against cold, and let the shoe breathe. Rubber/PU outsole with shank, with extra good anti-slip properties through the Active Grip treatment. Composite toe cap. Soft nail penetration. Removeable insole.

COLOR 10 Black

SIZE 38-48

STANDARD EN ISO 20345:2011, S3 CI HRO ESD SRC

MATERIAL Upper: Full grain leather, textile. Lining: 3M Thinsulate ™. Outsole: Rubber/PU. Safety toe cap: Composite. Penetration protection: Soft.

0-75-857-10 ANKLE BOOT OILMASTER S3Ankle boot that are ESD approved, with uppers of full grain leather. It is lined with 3M Thinsulate ™, which insulates against cold, and let the shoe breathe. Rubber/PU out-sole with shank, with extra good anti-slip properties through the Active Grip treatment. Memory Foam System gives extra stability and comfort. Composite toe cap. Soft nail penetration. Removeable insole.

COLOR 10 Black

SIZE 38-48



ESD ESD stands for electrostatic discharge. Electrically conductive footwear must be used whenever it is necessary to minimize electrostatic discharges in the shortest possible time, e.g. if there is a risk of destroying electronic equipment. ESD footwear is antistatic. However, if you get an electric shock while wearing ESD footwear, the current will go straight through your body. ESD footwear is primarily made to preserve fine pitch electronics, not to protect the worker. Electrically conductive footwear must not be worn if there is the slightest risk of getting an electric shock from the live parts of electrical appliances. Products marked ESD fulfill current requirements and standards for ESD. In order for ESD footwear to work in a satisfactory manner, both the personal protective equipment and the workplace must divert static electricity.

19


0-75-855-10 LACE BOOT OILMASTER S3Lace boot that are ESD approved, with uppers of full grain leather. It is lined with 3M Thinsulate ™, which insulates against cold, and let the shoe breathe. Zip opening on side. Rubber/PU outsole with shank, with extra good anti-slip properties through the Active Grip treatment. Memory Foam System gives extra stability and comfort. Compo-site toe cap. Soft nail penetration. Removeable insole.

COLOR 10 Black

SIZE 38-48



0-7157-238-10 LACE BOOT WORKHORSE S3Lace boot made to keep your feet warm and secure in cold climates. The upper part is made of a combination of PU coated leather with a waterproof galosh in PU. The boot has removable lining, insulating down to -60° C. Outersole in oil- and acid-resistant rubber provides good adhesion under cold conditions. Composite toe cap. Soft nail penetration. Removeable insole.

COLOR 10 Black

SIZE 40-47

STANDARD EN ISO 20345:2011, SB P SRA

MATERIAL Upper: PU coated leather. Lining: Removable sock. Outsole: Rub-ber. Safety toe cap: Composite. Penetration protection: Soft.

0-1000-801-60 SOCK DEVOLD ANTIFLAME THINThin, durable sock. Protective against flame and melted metal.

COLOR 60 Grey

SIZE M-XL

STANDARD EN 531 A1 B1 C1

MATERIAL 48% Wool, 48% Lenzing FR, 4% Elastan

20


COLOR 60 Grey

SIZESIZESIZE

39-42 0-33700-543-46 0-33700-047-48 0-33700-10

STANDARD EN ISO 11612 A1 B3 C2 D3.

MATERIAL 80% Wool, 18% Polyamide, 2% Elastane

EN 11612

SOCK DEVOLD FLAME RETARD 43-46A very good and medium heavy flame retardant sock for use in mountain shoe, safety boots, boots and waterproof footwear. The socks transport moisture away from the foot.

21


22


0-6-6362-1032 GLOVE IMPACT EXTREMEThis glove is designed to provide protection against compression, cutting and impact damage, TPR protection covers backhand, fingers and nails. Anatomically designed glove, with curved fingers which together with textured PVC material in the palm provi-des a good grip also on surfaces contaminated with water and oil. The glove has wide cuffs and the best cut resistance. The back is equipped with reflective details to provide good visibility. Minimum: 1 bundle of 6 pairs. Carton: 10 bundles

COLOR 1032 Black/Fluorine Yello

SIZE 6-12

STANDARD EN 420:2003 + A1:2009, EN 388:2016 3X42DP

MATERIAL Palm: Hi abrasive PVC. Backhand: Polyester spandex. Meta-carpal: TPR. Cuff: Neopren.

0-6-6354-1080 GLOVE IMPACTThis glove is designed to provide protection against compression and impact injuries, TPR protection covers backhand, fingers and nails. Anatomically designed glove, with curved fingers which together with textured PVC material in the palm provides a good grip also on surfaces contaminated with water and oil. The glove has wide cuffs. The back is equipped with reflective details to provide good visibility. Minimum: 1 bundle of 6 pairs. Carton: 10 bundles

COLOR 1032 Black/High Viz Yellow

SIZE 6-12

STANDARD EN 420:2003 + A1:2009, EN 388:2016 2X21XP

MATERIAL Palm: Hi abrasive PVC. Backhand: Polyester spandex. Meta-carpal: TPR. Cuff: Neopren.

0-6-6358-98 GLOVE OFFSHORE MECHANICMicrofiber glove with flexible spandexmateriale at back hand. Oil and water resistant. Seamless neoprene cuff with Velcro adjustment. TPR protection on fingers and elastic foam protection over the knuckles. Double reinforcement in palm. Washable. Minimum to sell 1 bundle of 6 pairs. Carton 10 bundles.

COLOR 98 Assorted

SIZE 8-12

STANDARD EN 420:2003, EN 388:2003

MATERIAL Microfiber, spandex, Neoprene, Lycra

23


0-6-6590-98 GLOVE PERFORMANCE ULTRAGoat leather glove with cotton stretch at back hand which gives good breathability. Velcro wrist closer. Exceptional dexterity and comfort. For versatile installation work requiring precision. Minimum order quantity: 1 bundle of 12 pairs. Carton: 10 bundles.

COLOR 98 Assorted

SIZE 6-12

STANDARD EN 420:2003, EN 388:2003

MATERIAL Goatskin, cotton

0-6-6617-98 GLOVE FOAMGRIP PREMIUMSeamless liner and ergonomic design assure a maximum comfort and minimum hand fatigue. Micro foam nitrile coating at palm fingers and knuckles, is compatible with light oils and will provide a good grip and excellent abrasion resistance. Black coating surface hides dirt and grime. Suitable for assembling, light industry, transportation, construction and warehouse. Minimum order quantity: 1 bundle of 12 pairs. Carton: 10 bundles.

COLOR 98 Assorted

SIZE 6-12

STANDARD EN 420:2003, EN 388:2003

MATERIAL Lining: NylonCoating: Nitrile

0-6-6621-98 GLOVE FEELFLEX PREMIER WINTERDouble layer liner, with looped pile liner for extraordinary comfort and warmth. Protects down to -50°C. Excellent dexterity and abrasion resistance. Sandy nitrile coating provi-des great grip performance and oil resistant. Suitable for refrigerator industry, outside work under cold conditions. Minimum order quantity: 1 bundle of 12 pairs. Carton: 10 bundles.

COLOR 98 Assorted

SIZE 8-11

STANDARD EN 420, EN 388, EN 501

MATERIAL Lining: Nylon. Coating: Nitrile

24


0-1008-7422-98 EARMUFF MSA HIGH HELMET 14Passive earmuff with helmet attachment (14). Fluorecent yellow color. Designed for difference between left and right ear. Suitable for working environment with high noise level. Suitable for MSA-helmets. Carton: 20 pcs.

COLOR 98 Assorted

SIZE STK

STANDARD

STANDARD

EN 352-3, Attenuation: SNR=31dB H=32dB M=28dB L=21dB

0-1008-7399-98Passive earmuff with headband. Fluorescent yellow color. Designed for difference bet-ween left and right ear. Suitable for working environment with high noise level. Carton: 20 pcs.

COLOR 98 Assorted

SIZE STK

EN 352-1, Attenuation: SNR=31dB H=31dB M=28dB L=21dB

0-2660-500 HELMET V-GARD 500 1000VUnventilated 1000 volt helmet. 4-point suspension, integrated brim and rain channel. Protect against lateral crush (LD). 30 mm slot for attachment of accessories. Size 52-63 cm.

COLOR 10 Black, 15 Green, 25 Orange, 30 Yellow, 40 White, 45 Royal Blue, 60 Grey, 80 Red

SIZE STK

STANDARD EN 397, EN 50365. EN 13463-1

MATERIAL ABS

EARMUFF MSA HIGH HEADBAND

July 2018

Wenaas Workwear ASVoll6386 MåndalenTlf: +47 71227300

Wenaas Workwear, avd OsloKabelgaten 8, 0580 OsloPostboks 273 – Alnabru0614 Oslo

Wenaas Workwear, avd StavangerFabrikkveien 304033 Stavanger

Customer service centrePhone: +47 71227300

[email protected]@[email protected]@wenaas.no

www.wenaas.no / www.wenaas.com

Facebook - wenaas workwear

Instagram - @wenaas.no

your safety - shipserv.com pyrad... · • norsok s-002 working environment -> iso 11079 •...

Documents