your fi rst choice for welding ppe solutions - kimberly-clark · advanced welding fi lters,...
TRANSCRIPT
Advanced welding fi lters, helmets and PAPR systems
Your fi rst choice for welding PPE solutions
25345 Welding Catalogue EN 125345 Welding Catalogue EN 1 06/10/2011 16:2106/10/2011 16:21
2 Visit www.kcprofessional.com/uk
KIMBERLY-CLARK PROFESSIONAL* offers a comprehensive range of Personal Protective Equipment to meet the safety needs of your employees during welding related activities. We deliver trusted product solutions that help welders to stay safe and productive on the job. KIMBERLY-CLARK PROFESSIONAL* offers a wide range of welding fi lters and helmet solutions, some of them extended to cover the additional respiratory protection needs during the welding task.
JACKSON SAFETY* branded welding PPE products have always been recognised for their protection, comfort and style. You can rely on our commitment to improving workplace safety and our continuing focus on delivering products that meet the highest standards for quality, regulatory compliance, performance and durability.
INTRODUCING THE RANGE
25345 Welding Catalogue EN 225345 Welding Catalogue EN 2 06/10/2011 16:2106/10/2011 16:21
TNTNSMSM
WF50
WF40
WF30
WF20
WF10
STNSTN
WF60
3Speak to your local sales representative to learn more about the technology in our ADFs
WELDING FILTERS EXPLAINEDWe offer a complete range of automatic and passive welding fi lters, all of them categorised in a convenient performance ladder following a clear performance hierarchy. This allows users to make an informed choice of the best eye protection needed during the welding related tasks.
JACKSON SAFETY* branded ADFs are logically classifi ed by performance level for easier selection, and are marked with the type of liquid crystal used to deliver the eye protection. They are available with internal and external shade controls to allow the welder convenient access to all functions.
ADF Technological Platforms
JACKSON SAFETY* bring high quality liquid crystal technologies to the market, offering welders a choice of the most appropriate eye protection for the most demanding work place activities.
ADF Product Names Explained
Single or Dual Twisted NematicTwisted Nematic liquid crystal display molecules in the light state are parallel to the display’s outer surfaces. When the high voltage pulse is applied the molecules rotate a full 90 degrees.
Surface Mode (exclusive to KIMBERLY-CLARK PROFESSIONAL*)
In the light state of a surface mode liquid crystal display, only the liquid crystal molecules at the outside surfaces are at rest with their long axis parallel to the display’s outer surfaces. The liquid crystal at the centre of the display is aligned perpendicular to the outside display surfaces. When the high voltage pulse is applied, only the molecules near the surface need to rotate the full 90 degrees as the fi lter switches. Therefore, the switching speed is much faster, reducing the exposure of the eyes to the harmful radiation that damages the cornea.
Multipurpose Variable Shade ADFs
Value Variable Shade ADFs
Basic Variable Shade ADFs
Fixed Shade ADFs
Polycarbonate (PC) or Mineral Glass (MG) Passive Filters
WF40 4/9-13 INT SM ADF 1 UNIT
Performance Level
Shade Range
Shade Control Location
Technological Platform
Type of Welding Filter
Case Count
Advanced Variable Shade ADFs
Single or Dual Super Twisted NematicBased on the traditional TN liquid crystal technology, the superior STN variant allows the liquid crystal molecules to turn up to 270 degrees. This improves optical properties across the viewing area to reduce eye fatigue as the eye does not have to adjust to different shades.
25345 Welding Catalogue EN 325345 Welding Catalogue EN 3 06/10/2011 16:2106/10/2011 16:21
TNTN
TNTN
J8101 DIN 9 J8102 DIN 10 J8103 DIN 11 J8104 DIN 12
• WF10 WELDING PASSIVE FILTER 90 x 110 SHADE 9• WF10 WELDING PASSIVE FILTER 90 X 110 SHADE 10• WF10 WELDING PASSIVE FILTER 90 X 110 SHADE 11• WF10 WELDING PASSIVE FILTER 90 X 110 SHADE 12• Replacement inner lens: J8304 REPLACEMENT PLASTIC PROTECTIVE LENS 90 X 110mm CLEAR• Replacement lens retainer: J8346 WELDING LENS RETAINER PASSIVE FILTER 90 x 110mm
ADFs & PASSIVE FILTERS
Welding fi lters constitute the key building block of eye protection against the multiple hazards encountered during welding related tasks. KIMBERLY-CLARK PROFESSIONAL* offers a wide range of welding fi lters: from passive fi lters made of Mineral Glass (MG), through fi xed Automatic Darkening Filters (ADFs) to variable ADFs that cover the most demanding welding, grinding and torch cutting applications for all levels of professional expertise.
4 Visit www.kcprofessional.com/uk
J8356 DIN 9 J8347 DIN 10 J8357 DIN 11 J8359 DIN 12
• WF10 WELDING PASSIVE FILTER 60 x 110 SHADE 9• WF10 WELDING PASSIVE FILTER 60 X 110 SHADE 10• WF10 WELDING PASSIVE FILTER 60 X 110 SHADE 11• WF10 WELDING PASSIVE FILTER 60 X 110 SHADE 12• Replacement inner lens: J8348 REPLACEMENT PLASTIC PROTECTIVE LENS 60 X 110mm CLEAR
WF10 Passive Welding Filters and LensesWF10 welding fi lters are made of toughened mineral glass and offered in two sizes (60 x 110mm and 90 x 110mm) in a wide range of DIN shades (9 to 12). PC magnifying lenses are also available in a wide range of diopters (special ADF adapter may be required).
WF10 Passive Welding Filters 60 x 110mm
WF10 Passive Welding Filters 90 x 110mm
WF20 Fixed Shade Automatic Darkening Filters
WF20 fi xed shade ADFs are offered in the most typical dark shades for the specialised welder to enjoy the protection and productivity benefi ts of automatic darkening technology. WF20 ADFs are provided with a 1.5 year manufacturer warranty (see conditions on page 16).
J8181 • Standard 90 x 110mm cartridge size and a 98 x 40mm viewing area • Solar powered ADF, fitted with two sensors and adjustable sensitivity (high-low)• True colour definition for a clear state shade 3 and a fixed dark shade 10• Replacement inner lens: J8304 PLASTIC PROTECTIVE LENS 90 X 110mm CLEAR• Replacement lens retainer: J8343 WELDING LENS RETAINER TN FIXED ADF
WF20 3/10 INT TN ADF
J8188
J8183
• Standard 90 x 110mm cartridge size and a 98 x 40mm viewing area • Solar powered ADF, fitted with two sensors and adjustable sensitivity (high-low)• True colour definition for a clear state shade 3 and a fixed dark shade 11• Replacement inner lens: J8304 PLASTIC PROTECTIVE LENS 90 X 110mm CLEAR• Replacement lens retainer: J8343 WELDING LENS RETAINER TN FIXED ADF
WF20 3/11 INT TN ADF
J2741 Mag 1.0 J2742 Mag 1.25 J2743 Mag 1.5 J2744 Mag 1.75 J2745 Mag 2.0 J2747 Mag 2.5
• WF10 MAGNIFYING LENS 1.0 CLEAR• WF10 MAGNIFYING LENS 1.25 CLEAR• WF10 MAGNIFYING LENS 1.5 CLEAR• WF10 MAGNIFYING LENS 1.75 CLEAR• WF10 MAGNIFYING LENS 2.0 CLEAR• WF10 MAGNIFYING LENS 2.5 CLEAR
WF10 Magnifying Lenses 2 x 4.25 inches
25345 Welding Catalogue EN 425345 Welding Catalogue EN 4 06/10/2011 16:2106/10/2011 16:21
TNTN
SMSM
TNTN
SMSM
TNTN
SMSM
5Speak to your local sales representative to learn more about the technology in our ADFs
WF50 Multipurpose Variable Shade Automatic Darkening Filters
The WF50 variable shade ADF is offered with additional functions designed for a wider fi eld of applications for the expert professional welder to enjoy the protection and productivity benefi ts of the fastest switching speed in the market. WF50 ADFs are provided with a 2.5 year manufacturer warranty (see conditions on page 16).
WF40 Value Variable Shade Automatic Darkening Filters
WF40 variable shade ADFs are offered in a range of dark shades and larger viewing areas for the professional welder to enjoy the protection and productivity benefi ts of both automatic darkening technologies. WF40 ADFs are provided with a 2.5 year manufacturer warranty (see conditions on page 16).
WF30 Basic Variable Shade Automatic Darkening Filters
WF30 variable shade ADFs are offered in a typical range of dark shades for the professional welder to enjoy the protection and productivity benefi ts of two automatic darkening technologies. WF30 ADFs are provided with a 1.5 year manufacturer warranty (see conditions on page 16).
J8172 • Standard 90 x 110mm cartridge size and a 98 x 60mm trued colour viewing area. Powered by 2 x AAA replaceable batteries. Fitted with 2 sensors
• Three functions in one internal control: Weld (9 to 12 shade range), Grind (shade 5) and Cut (shade 3). Adjustable sensitivity and delay
• Fastest switching speed of 0.04ms from clear to dark• Replacement inner lens: J8303 PLASTIC PROTECTIVE LENS 109 x 66mm CLEAR• Replacement lens retainer: J8345 WELDING LENS RETAINER SM VARIABLE ADF
WF50 4/9-12 INT SM ADF
J8162 • Standard 90 x 110mm cartridge size and a 98 x 60mm viewing area • Powered by 2 x AAA replaceable batteries. Fitted with 2 sensors and adjustable sensitivity and delay• Fastest switching speed of 0.04ms from clear to dark. True colour definition for a clear state shade 4 and
internally controlled dark shade range from 9 to 12• Replacement inner lens: J8303 PLASTIC PROTECTIVE LENS 109 x 66mm CLEAR• Replacement lens retainer: J8345 WELDING LENS RETAINER SM VARIABLE ADF
WF40 4/9-12 INT SM ADF
J8190 • Standard 90 x 110mm cartridge size and a 96 x 42mm viewing area • Powered by a combination of a solar cell and 2 x Li-ion internal batteries. Fitted with 2 sensors and
adjustable sensitivity and delay• True colour definition for a clear state shade 4 and externally controlled dark shade range from 9 to 13• Replacement inner lens: J8328 PLASTIC PROTECTIVE LENS 103.5 x 47mm CLEAR• Replacement lens retainer: J8344 WELDING LENS RETAINER TN VARIABLE ADF
WF40 4/9-13 TN EXT ADF
J8187 • Standard 90 x 110mm cartridge size and a 96 x 42mm viewing area • Powered by a combination of a solar cell and 2 x Li-ion internal batteries. Fitted with 3 sensors and
adjustable sensitivity and delay• True colour definition for a clear state shade 4 and internally controlled dark shade range from 9 to 13• Replacement inner lens: J8302 PLASTIC PROTECTIVE LENS 107 x 51mm CLEAR• Replacement lens retainer: J8344 WELDING LENS RETAINER TN VARIABLE ADF
WF40 4/9-13 INT TN ADF
J8189 • Standard 90 x 110mm cartridge size and a 98 x 40mm viewing area • Powered by a combination of a solar cell and an internal Li-ion battery. Fitted with two sensors and
adjustable sensitivity (high-low)• True colour definition for a clear state shade 4 and an externally controlled dark shade range from 9 to 13• Replacement inner lens: J8329 PLASTIC PROTECTIVE LENS 94 x 45mm CLEAR• Replacement lens retainer: J8344 WELDING LENS RETAINER TN VARIABLE ADF
WF30 4/9-13 EXT TN ADF
J8142 • Standard 90 x 110mm cartridge size and a 98 x 40mm viewing area • Powered by 2 x AAA replaceable batteries. Fitted with 2 sensors and adjustable sensitivity and delay• Superior switching speed of 0.04ms from clear to dark. True colour definition for a clear state shade 4 and
internally controlled dark shade range from 9 to 12• Replacement inner lens: J8302 PLASTIC PROTECTIVE LENS 107 x 51mm CLEAR• Replacement lens retainer: J8345 WELDING LENS RETAINER SM VARIABLE ADF
WF30 4/9-12 INT SM ADF
25345 Welding Catalogue EN 525345 Welding Catalogue EN 5 06/10/2011 16:2206/10/2011 16:22
WH60
WH50
WH40
WH30
WH20
WH10
6 Want to know more? Call your local sales representative today for more information
JACKSON SAFETY* welding helmets, in combination with an appropriate welding fi lter, constitute the complete PPE solution for protection to eyes, face and head against the multiple hazards encountered during welding related tasks. KIMBERLY-CLARK PROFESSIONAL* offers a wide range of welding helmets to cover the most demanding welding, grinding and torch cutting applications for all levels of professional expertise. JACKSON SAFETY* branded welding helmets are logically classifi ed by performance level for easier selection. They are available in a selection of ready-to-use solutions or sold separately for the user to make an informed choice from a range of components available for each product family.
BLACK 4/9-13 EXT SM ADF 1 UNIT
Colour of Helmet
Shade Range
Shade Control Location
Technological Platform
Type of Welding Filter
Case Count
Welding Helmet Product Names Explained
Multi-purpose Solutions with Advanced ADFs
Multiview Solutions with Variable Shade ADFs
Value Solutions with Variable Shade ADFs
Combined Solutions with Variable Shade ADFs
Economy Solutions with Fixed Shade ADFs
Economy Solutions with Passive Filters
All JACKSON SAFETY* branded helmets are CE marked and comply with the European requirements according to the EU Directive 89/686/EEC for PPE. The following EN standards are applicable: DIN EN 175:1997-08, DIN EN 166:2002-04; DIN EN 169:2003-02 (for selected helmets provided with a mineral glass) and DIN EN 379:2009-07 (for selected helmets provided with an ADF)
A range of spare parts for consumable components is available per product family for the user to prolong the life of the welding helmet at optimum performance conditions. JACKSON SAFETY* branded welding helmets are provided with a 1.5 year manufacturer warranty (see conditions on page 16).
WH40
Performance Level
WELDING HELMETS
25345 Welding Catalogue EN 625345 Welding Catalogue EN 6 06/10/2011 16:2206/10/2011 16:22
WH50
WH40
WH30
7Visit www.kcprofessional.com/uk
POWERED AIR PURIFYING RESPIRATOR (PAPR) SYSTEMS
The R60 AIRMAX* blower unit is sold separately for you to choose the PAPR head top that best suits your needs. The blower unit is supplied with a hose fi tted with an exclusive bayonet coupling to ensure a reliable connection to the selected JACKSON SAFETY* head top.
Spare Parts Available
2 J5220 AIRMAX* Welding PAPR Battery
3 J5230 AIRMAX* Welding PAPR Charger
4 J5210 AIRMAX* Welding PAPR Filter
5 J5240 AIRMAX* Welding PAPR Hose
6 J5241 AIRMAX* Welding PAPR Hose Cover
7 J5242 AIRMAX* Welding PAPR Waist Belt
Multiview Welding Head Top
Element Welding Head Top
Albatross Welding Head Top
Complete Blower Unit
All our PAPR systems are based on the R60 AIRMAX* blower unit. The light weight (940g) low-noise compact unit offers a fl ow rate of fi ltered air from 170 to 210 LPM that will last for an entire 8 hour shift. The unit is provided with a 1.5 year manufacturer warranty (see conditions on page 16)
1 J5200 • Conforms to DIN EN 12941:2009 for TH2P R SL classification for Reusable filtration against both Solid and Liquid particles
• Robust compact unit made of stainless steel and tough ABS plastic• Quick rechargeable Li-ion battery. Charging time: 4 hours• Reusable TH2P R SL filter with increased surface area for longer filtration lifetime. Replacement filter
available• Fitted with flame retardant supporting belt and hose cover for prolonged operational time
R60 AIRMAX*
Airborne hazards contain solid and liquid particles from welding fumes and dust that may require additional respiratory protection during welding related activities. KIMBERLY-CLARK PROFESSIONAL* offers a range of Powered Air Purifying Respiratory (PAPR) systems for extended protection at high levels of comfort to the wearer. PAPR head tops are available in the following product families:
25345 Welding Catalogue EN 725345 Welding Catalogue EN 7 06/10/2011 16:2206/10/2011 16:22
WH50
WH40
WH30
WH20
WH10
WH60
8 For more information about our range visit www.kcprofessional.com/uk
J8070 Shade 10 MG • Integrated flip-up lid with an quick release system for welding filter and protective lenses• Additional mineral glass shades available (DIN 9 to 12) for a wider range of welding methods and conditions • Improved face cover extends to protect neck
WH10 Flip-Up Black 60 x 110 MG
WH10 economy Flip-Up Welding Helmets come fi tted with a Mineral Glass (MG) shade DIN 10 installed in the fl ip-up lid.
WH10 Flip-Up Welding Helmets
WH10 FLIP-UPWELDING HELMETS
Spare Parts Available
1 J8331 Basic Welding Head Gear
2 J8330 Welding Sweat Band
3 J8342 WH10 Welding Flip-Up Kit 60 x 110
4 J8348 Welding Plastic Protective Lens 60 x 110
5 J8356 WF10 Welding Passive Filter 60 x 110 Shade 9
5 J8347 WF10 Welding Passive Filter 60 x 110 Shade 10
5 J8357 WF10 Welding Passive Filter 60 x 110 Shade 11
5 J8359 WF10 Welding Passive Filter 60 x 110 Shade 12
For J8070 & J8072
J8072 For Hard Hat
Shade 10 MG
• Integrated flip-up lid with a quick release system for welding filter and protective lenses• Additional mineral glass shades available (DIN 9 to 12) for a wider range of welding methods and conditions • Supplied with hard hat adaptors ready to be assembled with the hard hat. Hard hat supplied separately
(J8500)
WH10 Flip-Up Black 60 x 110 MG
25345 Welding Catalogue EN 825345 Welding Catalogue EN 8 06/10/2011 16:2206/10/2011 16:22
WH50
WH40
WH30
WH20
WH10
WH60
TNTN
TNTN
Spare Parts Available
1 J8181 WF20 3/10 INT TN ADF
1 J8188 WF20 3/11 INT TN ADF
1 J8189 WF20 4/9-13 EXT TN ADF
2 J8331 Basic Welding Head Gear (upgraded)
3 J8360 Welding Sweat Band
3 J8330 Basic Welding Sweat Band (for upgraded J8331)
4 J8334 Outer Protective Cover Lens 110 x 97
5 J8339 WH10, WH20 Front Frame
6 J8304 Inner Protective Lens 100 x 90 (J8033, J8060, J8031 only)
6 J8329 Inner Protective Lens 94 x 45 (J8042 only)
Shared Parts For All WH10 & WH20 Codes
9Want to know more? Call your local sales representative today for more information
WH20 Welding Helmets
WH20 economy welding helmets come fi tted with the option of two different ADFs for increased safety, fl exibility and productivity for the specialised welder.
J8031 • Light weight durable economy welding solution• Fitted with a fixed shade ADF with a DIN 11 dark state. Light state DIN3• Easy snap-in clip system to hold ADF and protective lens• Ideal for the specialised welder in high productivity welding work environments• Alternative WF20 TN INT 3/10 ADF available (J8181)
WH20 Welding Helmet Black 3/11 INT TN ADF
J8042 • Light weight durable economy welding solution• Fitted with an variable shade ADF with a dark state range from DIN 9 to 13. Light state DIN 4• Easy snap-in clip system to hold ADF and protective lens• Ideal for the specialised welder in high productivity welding work environments
WH20 Welding Helmet Black 4/9-13 EXT TN ADF
WH10 & WH20WELDING HELMETS
J8033 Shade 11 MG
J8060 Shade 11 MG in bulk x 20 Units
• Light weight durable economy welding solution• Fitted with an easy snap-in clip system to hold mineral glass and protective lens• Ideal for the specialised welder• Other mineral glass shades from DIN 9 to 12 available
WH10 Welding Helmet Black 90 x 110 MG
WH10 economy welding helmets come fi tted with a 90 x 110mm shade 11 (MG) Mineral Glass welding fi lter for the specialised welder.
WH10 Welding Helmets
25345 Welding Catalogue EN 925345 Welding Catalogue EN 9 06/10/2011 16:2206/10/2011 16:22
WH50
WH40
WH30
WH20
WH10
WH60
TNTN
TNTN
10 Speak to our sales professionals to find the best helmet and ADF solution for you
WH30 ALBATROSS WELDING HELMETS AND PAPR HEAD TOPS
J5033 Shade 10
J5036 4/9 - 13 ADF
J5037 For Hard Hat 4/9 - 13 ADF
• Extended PAPR variations to offer combined grinding and welding activities that require respiratory protection
• EN 12941 tested and EC certified to work with the R60 AIRMAX* • Low weight solution, suitable for combined grinding and welding activities• EC certified for a B rated impact resistance as per EN 175 and EN 166 standards• Easy to replace filter holding mechanism for a wide range of mineral glasses and ADFs• Tough design ideal for demanding tasks• Version available for a hard hat combination for extended head protection
WH30 Albatross PAPR Welding Helmet Black
J5032 Shade 10 MG
J5035 4/9 - 13 ADF
J5034 For Hard Hat 4/9 - 13 ADF
• Low weight solution, suitable for combined grinding and welding activities• EC certified for a B rated impact resistance as per EN 175 and EN 166 standards• Easy to replace filter holding mechanism for a wide range of mineral glasses and ADFs• Tough design ideal for demanding tasks• Version available for a hard hat combination for extended head protection
WH30 Albatross Welding Helmet Black
The WH30 Albatross introduces a complete family of combined helmet solutions for welding and grinding activities. All are fi tted with a practical welding fi lter fl ip-up holder to complement the eye protection provided by a large face shield.
J5033
Welding Helmet and PAPR Head Top Solutions
J5032
Spare Parts Available
1 J8352 WH30 Albatross Welding Flip-Up Kit1
2 J8353 WH30 Albatross Visor
3 J8354 Plastic Protective Lens 107 x 87mm
4 J8355 Albatross Welding Hard Hat Adaptor (Right and Left)
5 J8181 WF20 3/10 INT TN ADF
5 J8183 WF20 3/11 INT TN ADF
5 J8188 WF20 3/11 INT TN ADF
5 J8142 WF30 4/9-12 INT SM ADF
5 J8162 WF40 4/9-12 INT SM ADF
5 J8187 WF40 4/9-13 INT TN ADF
6 J8333 Welding Head Gear Pro Black (J5032, J5035)
7 J8330 Welding Sweat Band Black (J5032, J5035)
8 J5260 PAPR Welding Head Gear (J5033, J5036)
9 J5262 PAPR Welding Sweat Band (J5033, J5036)
10 J5274 PAPR WH30 Face Seal Kit for Hard Hat (J5037)
10 J5251 PAPR Visor Face Seal (J5033, J5036)
11 J5275 PAPR WH30 Air Kit for Hard Hat2
J8346 Lens Retainer for Passive Filter (not shown)
J8344 Lens Retainer TN Variable ADF (not shown)
J8304 Inner Protective Lens 90 x 110mm (J5032, J5033) (not shown)
J8302 Inner Protective Lens 107 x 51mm (J5034, J5035, J5036, J5037) (not shown)
The list includes alternative JACKSON SAFETY* welding fi lters (please refer to pages 4 and 5 for full product details and spare parts).
1 Flip-up holder provided with protective lens, cradle, lens retainer and screws.2 Air kit provided with hoses, connectors and adaptor for the R60 AIRMAX* blower unit.
25345 Welding Catalogue EN 1025345 Welding Catalogue EN 10 06/10/2011 16:2206/10/2011 16:22
WH50
WH40
WH30
WH20
WH10
WH60
TNTN
TNTN
J8027 • Robust - low weight solution for the most demanding tasks• Fitted with a TN technology based 4/9-13 ADF with external shade control and a screw-in lens retainer
system for a more secure fastening• Available in matt black, with a wide range of spare parts available for extended lifetime• External control allows shade adjustment during the welding task
WH30 Element Welding Helmet Black 4/9 - 13 EXT
J8028 • Robust - low weight solution for the most demanding tasks• Fitted with a TN technology based 4/9-13 ADF with internal controls and an screw-in lens retainer system
for a more secure fastening• Available in matt black, with a wide range of spare parts available for extended lifetime
WH30 Element Welding Helmet Black 4/9 - 13 INT
The WH30 Element is a complete family of value helmet solutions for welding activities for the professional welder.
Welding Helmet Solutions
WH30 ELEMENTWELDING HELMETS
Welding Helmet (Without a Welding Filter)
Alternative options for you to separately buy the welding fi lter that best suits your needs.
Spare Parts Available
2 J8301 WH30 Outer Protective Lens 97 x 110mm
3 J8302 Inner Protective Lens 107 x 51mm (for J8028)
3 J8328 Inner Protective Lens 103.5 x 47mm (for J8027)
4 J8330 Welding Sweat Band
5 J8331 Basic Welding Head Gear
6 J8344 Lens Retainer TN Variable ADF
7 J8362 Front Frame Black
Recommended JACKSON SAFETY* Welding Filter (please refer to pages 4 & 5 for full product details and spare parts available)
J8025 WH30 Element Welding Helmet - Black Available ADFs for this helmet: 1 J8188 WF20 3/11 INT TN ADF 1 J8183 WF20 3/11 INT TN ADF 1 J8181 WF20 3/10 INT TN ADF 1 J8142 WF30 4/9-12 INT SM ADF 1 J8162 WF40 4/9-12 INT SM ADF
11Visit www.kcprofessional.com/uk
25345 Welding Catalogue EN 1125345 Welding Catalogue EN 11 06/10/2011 16:2206/10/2011 16:22
WH50
WH40
WH30
WH20
WH10
WH60
TNTN
TNTN
12 Discover our complete range at www.kcprofessional.com/uk
WH40 ELEMENTWELDING HELMETS
J8019 Blue
J8034 Silver
• Robust - low weight solution for the most demanding tasks• Fitted with a TN technology based 4/9-13 ADF with external shade control and a screw-in lens retainer
system for a more secure fastening• Fitted with a comfort head gear with easy to adjust mechanism• Wide range of spare parts available for extended lifetime• External control allows shade adjustment during the welding task
WH40 Element Welding Helmet 4/9 - 13 EXT ADF
J8010 Blue
J8029 Silver
• Robust - low weight solution for the most demanding tasks• Fitted with a TN technology based 4/9-13 ADF with internal controls and a screw-in lens retainer system for
a more secure fastening• Fitted with a comfort head gear with easy to adjust mechanism• Wide range of spare parts available for extended lifetime
WH40 Element Welding Helmet 4/9 - 13 INT ADF
A complete range of value PPE solutions for the professional welder, suitable for multiple applications. All are provided with TN based technology ADFs, and are EC certifi ed as per EN 379, EN 175 and EN 166 standards.
J8034
Welding Helmet Solutions
J8010
Welding Helmet (Without a Welding Filter)
Alternative options for you to separately buy the welding fi lter that best suits your needs.
Spare Parts Available
2 J8301 WH40 Outer Protective Lens 97 x 110mm
3 J8302 Inner Protective Lens 107 x 51mm (for J8010, J8029, J8018, J8020)
3 J8328 Inner Protective Lens 103.5 x 47mm (for J8019, J8034, J8019, J8021)
4 J8330 Welding Sweat Band
5 J8333 Welding Head Gear Pro
6 J8361 Element Front Frame Silver
6 J8362 Element Front Frame Black
7 J8344 Lens Retainer TN Variable ADF
Recommended JACKSON SAFETY* Welding Filter (please refer to pages 4 & 5 for full product details and spare parts available)
J8011 WH40 Element Welding Helmet - Blue Available ADFs for this helmet: 1 J8181 WF20 3/10 INT TN ADF J8016 WH40 Element Welding Helmet - Silver Available ADFs for this helmet: 1 J8183 WF20 3/11 INT TN ADF 1 J8188 WF20 3/11 INT TN ADF 1 J8142 WF30 4/9-12 INT SM ADF 1 J8162 WF40 4/9-12 INT SM ADF
25345 Welding Catalogue EN 1225345 Welding Catalogue EN 12 06/10/2011 16:2206/10/2011 16:22
WH50
WH40
WH30
WH20
WH10
WH60
TNTN
TNTN
TNTN
WH40 ELEMENT WELDING PAPR HEAD TOPS
J5019 Blue
J5021 Black
• Extended PAPR variations for welding activities that require respiratory protection • Fitted with a TN technology based 4/9-13 ADF with external shade control and a screw-in lens retainer
system for a more secure fastening• Robust - low weight solution for the most demanding tasks• Fitted with a comfort head gear with easy to adjust mechanism• External control allows shade adjustment during the welding task
WH40 Element PAPR Welding Helmet “S” 4/9-13 EXT TN ADF
J5018 Blue
J5020 Black
• Extended PAPR variations for welding activities that require respiratory protection • Fitted with a TN technology based 4/9-13 ADF with internal controls and a screw-in lens retainer system for
a more secure fastening• Robust - low weight solution for the most demanding tasks• Fitted with a comfort head gear with easy to adjust mechanism
WH40 Element PAPR Welding Helmet 4/9-13 INT TN ADF
WH40 Element PAPR Head Tops are certifi ed to work with the R60 AIRMAX* Blower Unit with its over the head air delivery system for improved weight distribution (refer to page 7 for more product details and complete list of spare parts available). All are provided with TN based technology ADFs.
J5021
Welding PAPR Head Top Solutions
J5018
J5009 Black • Combined PAPR variation for grinding and welding activities that require respiratory protection • “V” system that incorporates a B rated PAPR face shield underneath a WH40 Element welding shell• Fitted with a TN technology based 4/9-13 ADF with intern controls and an screw-in lens retainer system for
a more secure fastening• Robust solution fitted with a comfort head gear with easy to adjust mechanism• External control allows shade adjustment during the welding task
WH40 Element PAPR Welding Helmet “V” 4/9-13 EXT TN ADF
Welding Helmet (Without a Welding Filter)
Alternative options for you to separately buy the welding fi lter that best suits your needs.
Spare Parts Available
8 J5462 PAPR Welding Sweat Band
9 J5250 PAPR WH40 Element Face Seal
9 J5251 PAPR Visor Face Seal (J5007, J5009)
10 J5260 PAPR Welding Head Gear
11 J5252 PAPR Visor Lens (J5007, J5009)
Recommended JACKSON SAFETY* Welding Filter (please refer to pages 4 & 5 for full product details and spare parts available)
J5001 WH40 PAPR Welding Helmet “S” Blue Available ADFs for this helmet: 1 J8181 WF20 3/10 INT TN ADF J5003 WH40 PAPR Welding Helmet “S” Black Available ADFs for this helmet: 1 J8183 WF20 3/11 INT TN ADF J5007 WH40 PAPR Welding Helmet “V” Black Available ADFs for this helmet: 1 J8188 WF20 3/11 INT TN ADF 1 J8142 WF30 4/9-12 INT SM ADF 1 J8162 WF40 4/9-12 INT SM ADF 1 J8190 WF40 4/9-13 EXT TN ADF
13Speak to our sales professionals to find the best helmet and ADF solution for you
Additional spare parts for PAPR Head Tops (refer to page 12 for shared spare parts)
25345 Welding Catalogue EN 1325345 Welding Catalogue EN 13 06/10/2011 16:2206/10/2011 16:22
WH50
WH40
WH30
WH20
WH10
WH60
TNTNSMSM
SMSM
SMSM
14 Visit www.kcprofessional.com/uk
WH50 MULTIVIEW WELDING HELMETS & PAPR HEAD TOPS
J5023 4/9 - 12 INT SM ADF • Extended PAPR variations for welding activities that require respiratory protection. • “V” system that incorporates a B rated PAPR face shield and a WH50 Multiview welding shell.• Available in Surface Mode (SM) ADF technology for improved eye protection from a fast switching speed• Fitted with a comfort head gear with easy to adjust mechanism
WH50 Multiview Welding PAPR Helmet “V” IRUV5 Carbon
J8009 4/9 - 12 INT SM ADF
J8024 4/9 - 13 INT TN ADF
• Robust high quality carbon graphics with exceptional peripheral vision for increased awareness during the welding task
• Available in both ADF technologies for the welder to choose the most suitable platform• Fitted with a comfort head gear with easy to adjust mechanism
WH50 Multiview Welding Helmet IRUV5 Carbon
Provided with a combination of SM and TN based technology ADFs and IRUV Shade 5 side windows for lateral vision. PAPR head tops are designed and EC certifi ed to work with the R60 AIRMAX* Blower Unit with its over the head air delivery system for improved weight distribution (refer to page 6 for more product details and complete list of spare parts available).
Welding Helmet & PAPR Head Top Solutions
J8009
J5022 4/9 - 12 INT SM ADF • Extended PAPR variations for welding activities that require respiratory protection.• Robust high quality carbon graphics with exceptional peripheral vision for increased awareness during the
welding task• Available in Surface Mode (SM) ADF technology for improved eye protection from a fast switching speed• Fitted with a comfort head gear with easy to adjust mechanism
WH50 Multiview Welding PAPR Helmet “S” IRUV5 Carbon
Welding Helmet & PAPR Head Tops (Without a Welding Filter)
Alternative options for you to separately buy the welding fi lter that better suits your needs.
Spare Parts Available
2 J8338 Outer Protective Lens 89 x 142mm
3 J8333 Head Gear Pro (J8003, J8009, J8024)
4 J8330 Welding Sweat Band (J8003, J8009, J8024)
5 J8358 WH50 Multiview Side Window Right & Left (blank)
6 J8302 Inner Protective Lens 107 x 51mm (J8024)
6 J8303 Inner Protective Lens 109 x 66mm (J8009, J5022, J5023)
7 J8344 Lens Retainer TN Variable ADF
7 J8345 Lens Retainer SM Variable ADF
Recommended Jackson Safety* Welding Filter (please refer to page 4 & 5 for full product details and spare parts available)
J8003 WH50 Multiview Welding Helmet IRUV5 Carbon Available ADFs for this helmet: 1 J8142 WF30 3/9-12 INT SM ADF J5012 WH50 Multiview Welding PAPR Helmet “S” SW IRUV5 Carbon Available ADFs for this helmet: 1 J8187 WF40 4/9-13 INT TN ADF J5014 WH50 Multiview Welding PAPR Helmet “V” SW IRUV5 Carbon Available ADFs for this helmet: 1 J8162 WF40 3/9-12 INT SM ADF 1 J8172 WF50 4/9-12 G INT SM ADF
Spare Parts for WH50 Welding Helmets
8 J5462 PAPR Welding Sweat Band (J5012, J5014, J5022, J5023)
10 J5260 Airmax Welding PAPR Head Gear (J5012, J5014, J5022, J5023)
9 J5251 PAPR Visor Face Seal (J5023, J5014)
9 J5452 PAPR WH50 Multiview Face Seal (J5012, J5022)
11 J5252 PAPR Visor Lens (J5014, J5023)
Additional Parts for PAPR Head Tops (refer to diagram on page 13)
25345 Welding Catalogue EN 1425345 Welding Catalogue EN 14 06/10/2011 16:2206/10/2011 16:22
WH60
WH50
WH40
WH30
WH20
WH10
SMSM
STNSTN
WH60 TRANSLIGHT WELDING HELMETS
15Experience the WH60 Translight for yourself. Call your local sales representative today
J8550 Black
J8552 Blue
• Integrated Super Twisted Nematic (STN) ADF technology to deliver superior optical denomination (1:1:1:2), provided with a 3 year manufacturer warranty (see conditions on page 16)
• Integrated all in one weld/grind mode with shade control allows adjustment during the welding task• Widest 4/6-13 shade range available• B- rated co-injected cover lens kit, integrated to front frame for easy replacement• Available in black and blue with appealing decals
WH60 Translight Welding Helmet 4/6-13 G EXT STN
J8551 Black
J8553 Blue
• Integrated KIMBERLY-CLARK PROFESSIONAL* exclusive Surface Mode (SM) ADF technology to deliver the fastest switching speed
• Integrated all in one weld/torch and grind mode control• Internally (INT) controlled 4/9-12 shade range, sensitivity and delay• B rated co-injected cover lens kit, integrated to front frame for easy replacement• Time out/power down after 20 minutes of non-use• Available in black and blue with appealing decals
WH60 Translight Welding Helmet 4/9-12 G INT SM
The WH60 Translight has been designed to allow the expert welder to switch between welding and grinding activities at high productivity rates, using a single body shell. All components are B rated as per EN 175 requirements at 120 m/sec impact resistance. The WH60 Translight also comes fi tted with exclusive ergonomic head gear featuring an adjustable ratchet designed to be used whilst wearing welding gloves.
J8550
Welding Helmet Solutions
J8553
Welding Helmet (Without a Welding Filter)
Alternative options for you to separately buy the JACKSON SAFETY* welding fi lter that best suits your needs.
Recommended JACKSON SAFETY* Welding Filter (please refer to pages 4 & 5 for full product details and spare parts available)
J8554 Black x 20 units Available ADFs for this helmet: 1 J8142 WF30 3/9-12 INT SM ADF J8555 Blue x 20 units Available ADFs for this helmet: 1 J8187 WF40 4/9-13 INT TN ADF 1 J8162 WF40 3/9-12 INT SM ADF 1 J8172 WF50 4/9-12 G INT SM ADF
Spare Parts Available 2 J8560 WH60 Translight Protective Cover Lens
3 J8561 WH60 Translight Sweat Band
4 J8562 WH60 Translight Head Gear
5 J8302 Inner Protective Lens 107 x 51mm (J8551, J8553)
5 J8303 Inner Protective Lens 109 x 66mm (J8550, J8552)
6 J8345 Lens Retainer SM Variable ADF (J8551, J8553)
6 J8344 Lens Retainer TN Variable ADF (J8550, J8552)
25345 Welding Catalogue EN 1525345 Welding Catalogue EN 15 06/10/2011 16:2206/10/2011 16:22
® and * Trademarks of Kimberly-Clark Worldwide, Inc. © 2011 KCWW Publication code: 4667.01 GB 10.11
www.kcprofessional.com/uk
0800 269 470
16
Visit our website to browse the complete range www.kcprofessional.com/uk
It is the employer’s responsibility to assess the risk of the task to be undertaken and determine the correct choice of product or personal protective equipment for the task. The manufacturer, KIMBERLY-CLARK PROFESSIONAL*, does not accept any responsibility for the incorrect choice or misuse of the product or personal protective equipment shown in this brochure. All care has been taken to ensure that the information contained herein is correct at time of publication. However legislation concerning these products or personal protective equipment is under constant review and may change in the lifetime of this brochure. Accordingly, the specifi cation for the products may be subject to change. We would advise you to contact INFOFAX if you have any queries concerning the products shown or the suitability of such products for a particular task. Always dispose of used products or protective equipment in a safe and appropriate manner in accordance with European, National and Local environmental regulations.
For a safer and more productive workplace, KIMBERLY-CLARK PROFESSIONAL* supplies a range of Safety and Wiping Solutions.
PRODUCT WARRANTY/LIMITATION OF DAMAGES
KCP warrants that its products: (i) comply with KCP’s standard specifi cations as of the date of delivery to KCP’s authorised distributors and direct purchasers; (ii) comply with all KCP labelling representations; and (iii) are manufactured in compliance with all applicable federal, state, and local laws in effect at the time and place of manufacture of the products. THIS WARRANTY IS IN LIEU OF ALL OTHER PRODUCT WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTY OF MERCHANABILTY OR FITNESS FOR A PARTICULAR PURPOSE. KCP and its affi liates are not liable for any kind of special, incidental or consequential damages. KCP’s liability for breach of contract, tort, or other cause of action shall not exceed the product purchase price. Purchasers and users are deemed to have accepted the above warranty and limitation on damages. To the extent required by applicable law, KCP and its affi liates do not limit their liability for death/injury resulting from their negligence.
This warranty must be read in conjunction with the terms set out for each respective product in this catalogue particularly the limitations or exclusions to this warranty set out in the notes below. The warranty term for ADFs, welding helmets and PAPR blower units starts from the day the device is manufactured as indicated in the traceability code that goes with each unit.
Physical condition of the defective devices: Any modifi cation to the original design, misuse of the product contrary to the intended application advertised by KCP, or any other explicit recommendation included in the correspondent instructions manual or abuse of the product will void the warranty. Specifi c defects on welding fi lters (ADFs), helmets and PAPR systems not covered by the warranty include:
• Any damage created by fall or impact against a solid object and contact with hot surfaces and fl ames; exposure to excessive heat or force when adjusting replaceable components
• Any power supply issues derived from corrosion from batteries exposed to excessive humidity or direct exposure to liquids
• Any defect caused by spatter on the liquid crystal or solar panel
• Deterioration from normal use on the decoration of the painted surfaces
Enquiries: If you suspect that the functionality of the product is affected, and the instructions provided with each PPE device can’t solve the problem, stop the use of the PPE device, locate and register the traceability code available printed on the product and contact your sales representative or our technical information service line: [email protected]. Our Customer Services may request you to ship the product back to us for further examination and provide further instructions for cleaning and packaging prior to transportation.
25345 Welding Catalogue EN 1625345 Welding Catalogue EN 16 06/10/2011 16:2206/10/2011 16:22