your observing challenge: white dwarfs in open star clusters
DESCRIPTION
Your Observing Challenge: White Dwarfs in Open Star Clusters. Star clusters are collections of stars born nearly-simultaneously. Once we know their ages, we can determine how different stars change with time. Messier 35 and NGC 2158 (CFHT). 47 Tucanae (HST). - PowerPoint PPT PresentationTRANSCRIPT
Your Observing Challenge:White Dwarfs in Open Star Clusters
Star clusters are collections of stars born nearly-simultaneously. Once we know their ages, we can determine how different stars
change with time.
Messier 35 and NGC 2158 (CFHT)
47 Tucanae (HST)
Models tell us how the appearance of stars should change with time.
The ages of star clusters are usually determined by the “main sequence turn-off”
in a color-magnitude diagram.
The models that give white dwarf ages use different physics from the models that give us main sequence ages, giving us a sanity check!
von Hippel (2005)
Your Observing Challenge:
Take pictures of a star cluster with our 0.8-meter telescope and find candidate white dwarfs that might be useful for studying
ages of the cluster.
First, let’s examine your primary tools: the CCD camera and ImageJ
Light is the only probe we have for objects outside the
solar system.
Telescopes are funnels that collect large amounts of
light from stars, but must send light somewhere.
Several devices are capable of collecting light and
storing information about it.
The first modern astronomers used their eyes,
pencil and papers and brains.
William & Caroline Herschel
Heber CurtisMaria Mitchell
Eyes are very inefficient and cannot integrate.
Eyes can only do comparisons between
objects, and have trouble making quantitative
measurements.
The brain is not the most reliable image processing
software.
Around the turn of the century, photographic plates
became popular.
John Draper 1839Henry Draper 1880David Malin 1979
Plates can integrate and are modestly efficient.
Plates store images accurately for long periods
of time.
CCDs are the modern astronomer’s weapon of
choice for observing.
CCDs can integrate for long times at nearly 100%
efficiency.
The images are read into a computer and stored on
disk.
Dr. Jana Pittichova
CCDs pictures can be added together, letting you see
fainter.
Single Stack of 5
CCDs convert light to electrical signals.
CCDs are based on Einstein’s photoelectric effect.
CCDs are made of individual pixels, each of which works
independently.
The electrons knocked out of silicon are held in a well until
the exposure is finished.
QuickTime™ and aGIF decompressor
are needed to see this picture.
After the exposure, circuitry counts the number of
electrons and reports it to the computer.
If the signal is too high, the circuitry can’t count the electrons – the pixel is
“saturated.”
Colors are measured by taking images through colored glass filters.
CCDs only detect the number of photons, not their color.
Filters allow only one color of light through.
Measuring brightness through different filters
gives us color.
From Hubblesite.org
There are dozens of flavors of filters; the most common are the
Johnson system
U = ultraviolet
B = blue
V = green
R = orange/red
I = very red (not infrared) Wavelength
blue red
Th
rou
gh
pu
t (%
)
CCDs are not perfect, so astronomers must take
calibration data every night.
These calibrations take care of most defects.
Images of “standard stars” allow images to be put on an
absolute scale.
Different telescopes and instruments have different
throughput.
Dust and haze change the amount of light reaching the
ground.
Calibration using standard stars lets us compare data from different telescopes
and nights.
With cameras using one or more CCDs, astronomers
have been study very large areas of sky.
Kitt Peak Mosaic
Keck Observatory LRIS
Steward Observatory 90Prime
Astronomy requires the collecting of light for later
study.
Astronomers need cameras that take long exposures and
are efficient.
CCDs fit the bill -- provided the right calibrations are
taken.