1www.BioDigitalPC.com

1983 Marcus Ave. Suite 104, Lake Success, NY 11042 516.673.4444 BioDigitalPC.com

2

This GET STARTED guide is designed to help you set up and use your new BioDigitalPC® card and reader. It’s divided into three sections to help you find the information you need quickly.

1. Table of Contents2. Review of box Contents3. Setting up your BioDigitalPC®

6. Connecting USB Devices 7. Connecting to the Internet8. Connecting to a wireless network9. Inserting your BioDigitalPC®

Card

Section 1Getting Started Page 2

Section 2Software and Powering DownPage 8

Section 3Support Services & Warranty Page 9

1. Service & Support2. Warranty3. Disclaimer

1. Installing Software 2. Removing your BioDigitalPC®

Card

NOTE– PLEASE READ “SAFETY INSTRUCTIONS” IN THE SAFETY SECTION OF THE USER AGREEMENT BOOKLET PRIOR TO USE.

TABLE OF CONTENTS

3

YOUR BIODIGITALPC® & READER THE FOLLOWING COMPONENTS ARE INCLUDED:

BioDigitalPC® Power Supply(Typical)

BioDigitalPC®Reader (Typical)

Video CableHDMI to DPDP to ReaderHDMI to monitor

Wireless Dongle(Optional)

Audio Dongle (Optional)

4

1. Insert the power supply into an outlet2. Connect the power supply port into the reader. 3. Insert the BioDigitalPC® card into the slot in the reader.Note: The fan should automatically turn on when the card is inserted.

VIDEO ENABLED The BioDigitalPC® comes with an DP++ port that allows you to directly connect a display or projector with the Video Cable or converter. Use the included Video Cable to connect the DP++ port to connect monitors and projectors that have HDMI connectors.

GETTING STARTED

1.

2.3.

5

The BioDigitalPC® accepts USB accessories, such as a mouse, keyboard, or printer. You can also connect external speakers, headphones, and other devices to the headphone port, if available. The BioDigitalPC® USB connectors are located on the BioDigitalPC® Reader:

To connect:Plug the accessory into a USB port. The BioDigitalPC® will search the USB interface for the accessory.

Note: If the connected accessory requires a driver, download the driver from the accessory/device manufacturer’s website or by connecting an external hard drive to the USB port located on the BioDigitalPC® Reader.

GETTING STARTED CONTINUED

6

To connect to a DSL, cable modem or an Ethernet network:

Your BioDigitalPC® Reader comes with built-in Ethernet(10/100) networking capability, which you can use to connect to a network or DSL modem.Connect the cable to your DSL or cable modem or connect the Ethernet cable to the Ethernet hub or outlet. Then connect the other end of the cable to the Readers Ethernet port.

To connect to a wireless network

1. Plug wireless adapter dongle into the BioDigitalPC® reader USB port.2. Install drivers from manufacturer’s website.3. Click on VAN (View Available Networks) from the menu in the menu bar. VAN Network Connect will detect all available wireless networks.4. Choose a network to connect to from the status menu.5. Enter a password if required.

CONNECTING TO THE INTERNET

7

1. Put your BioDigitalPC® Card into the slot on the reader (with the label facing up) and the BioDigitalPC® powers up in seconds. You should then see your desktop display on the monitor.

2. You are now ready to use your BioDigitalPC®.

TO INSERT YOUR BIODIG ITALPC® CARD INTO THE READER

NOTE– BEFORE YOU INSERT YOUR BIODIGITALPC® CARD INTO THE READER SLOT, MAKE SURE THE LABEL SIDE OF THE BIODIGITALPC® CARD FACING UP.

THE RED INDICATOR LIGHT WILL ILLUMINATE ONCE THE READER IS CORRECTLY CON-NECTED TO A POWER SUPPLY. WHEN THE BIODIGITALPC® CARD IS PROPERLY INSERTED A GREEN INDICATOR LIGHT SHOULD LIGHT AND THE FAN WILL TURN ON.

8

INSTALLING SOFTWARE FROM A CD OR DVD

REMOVING YOUR BIODIGITAL PC® CARD

External Disc Drive (not included): Connect a DVD/CD drive into the USB connector on the Reader.

Insert the disc into the drive slot. The Software should begin to load automati-cally or according to the software specifications.

Before shutting down, close all applications to avoid data loss or corruption. Shut down the BiodigitalPC® according to your operating system’s instructions. After the shut down is complete, it is safe to remove the BioDigitalPC® card.

To remove the BioDigitalPC® Card simply grasp the card and pull it out of the reader.

WARNING: CARD MAY BE HOT AND MAY CAUSE BURNS

9

SUPPORT SERVICES

ADDC provides a range of product support services to its customers. For

detailed information, please refer to our website: www.BioDigitalPC.com

10

WARRANTY

Arnouse Digital Devices Corporation, reserves the right to make any modification to this manual or the information contained herein at any time without notice. The software described herein is governed by the terms of a separate user license agreement.

This product contains software licensed by third parties. Use of such software is subject to the terms and conditions of license agreements enclosed with this product. Some of the software may not be transported or used outside the United States. Software specifications are subject to change without notice and may not necessarily be identical to current retail versions. Certain product(s) included with the BioDigitalPC® may include features such as copy protection and content management technology.

USE OF THE SOFTWARE PRODUCT(S) REQUIRES AGREEMENT TO APPLICABLE END USER AGREEMENTS AND FULL COMPLIANCE WITH APPLICABLE PRODUCT ACTIVATION PROCEDURES. Product activation procedures and privacy policies will be detailed during initial launch of the software product(s), or upon certain reinstallations of the software product(s), or reconfigura-tions of the BioDigitalPC®, and may be completed by Internet or telephone (toll charges may apply).

DisclaimerEvery effort has been made to make this material complete, accurate, and up to date. ADDC reserves the right to make changes without notice and shall not be responsible for any damages.

See: BioDigitalPC.com/newsite/terms.php for the most up to date version of this manual.