EFFECTIVE APRIL 1, 2016

NEW

YAMAHA MARINE GROUP HOT SHEET

Other Cool Stuff Coming for 2018

2018 Will Bring New Power, New Controls and... Yamaha White

EFFECTIVEDECEMBER 1, 2017

Give the people what they want; that’s the theme for 2018! In addition to new outboards, Yamaha has new features for existing products and new rigging.

More than 30 percent of new boat customers in the offshore segment want their outboards painted white. Custom paint adds extra cost for the consumer and may not meet Yamaha standards for UV resistance

and corrosion protection. Now, boat builders and full-line dealers can order white directly from Yamaha for F300 and F350 out-boards. Yamaha White is a pearlescent white that thrives in the sunlight. Designed to complement all gelcoats, Yamaha White reduces consumer cost and the complexity associated with painting after manufacturing. Yamaha White outboards are available only as late stage customization (LSC) orders. They will be matched with the appropriate length gray-color gear cases.

Models F350NCC2 and F300NCA2, available April 2018.

continued on next page

F300 and F350 Now Available in Yamaha White

2

REMEMBER to always observe all applicable boating laws. Never drink and drive. Dress properly with USCG-approved personal flotation device and protective gear. This document contains many of Yamaha’s valuable trademarks. It may also contain trademarks belonging to other companies. Any reference to other companies or their products are for identification purposes only, and are not intended to be an endorsement. Due to Yamaha’s ongoing commitment to product improvement, we reserve the right to change without notice, equipment, materials, specifications, prices or availability. The information and data contained herein is approximate and subject to many factors and variables, including but not limited to atmospheric, water and equipment conditions and operator ability. Therefore, such information and data is provided as a guideline only. ©2017 Yamaha Motor Corporation, U.S.A. All rights reserved.

New 6X3 Control Adds Versatility, Fits More Boat Styles

For the first time, 6X3 controls can be mounted on either the left or right side of a gunnel or console! Fits most single-engine applications and is ideal for those that require left mounting, such as small RIB inflatables, where mounting location is an

issue. It now has a more contemporary look and better ergonom-ics, too. Still great for bass boats and other freshwater applications. The 6X3 flush-mount mechanical control includes thumb-operated trim/tilt switch, neutral switch, and a push-button neutral warm-up. Part #: (Right Hand): 6X3-48206-10-00 (includes built-in engine stop lanyard switch) • (Left Hand): 6X3-48206-20-00 (built-in engine stop lanyard switch not included on this model)

Available March 2018.

YA M A H A M A R INE GROUP HOT SHEET

continued on next page

Other Cool Stuff

More Power for Inshore Boats: F200 20-inch Shaft Model Now with Counter-Rotation

Twin applications work best with dedicated left and right rotation outboards. Counter rotating “LF” models of the F200 have been available for larger boats that require a 25-inch shaft length; now, counter rotation is available for the F200 for boats that require

a 20-inch shaft length. With the arrival of the LF200LCA, manufacturers and dealer can now rig F200 twin engines on boats with 20-inch transoms. Digital electronic control only.

Available May 2018