Summary

Simple remix which extends out the holes from the TPU model whichconnect to the faceshield. I found the provided holes were not flexibleenough to use with PETG.

Healthcare > Accessibility

Printing in PETG at around 70 for the bed and 225 for the extruder. Using"Dynamic Quality" - 0.16 layer height in Cura worked just fine. You canslow it down if you want higher quality. Printed in about 50 minutes.

Model contains both pieces of the strap for printing to make my life (andhopefully yours) easier.

This is just the straps, see the original for links to the actual face shield.

M Mike B

PETG Strap for thePrusa ProtectiveShield

VIEW IN BROWSER

updated 6. 4. 2020 | published 6. 4. 2020

3D M

ODEL

ONLY

Model Files (.stl, .3mf, .obj, .amf) DOWNLOAD ALL FILES

182.3 KBupdated 6. 4. 2020

This remix is based on

TPU Strap for the Prusa Protective Shield

by Neil-Seattle

The Author has not uploaded any print files.Try to search in User print files section or generate and upload yourown.

License

This work is licensed under a Creative Commons (4.0 International License)

Attribution-ShareAlike

✖ | Sharing without ATTRIBUTION ✔ | Remix Culture allowed ✔ | Commercial Use ✔ | Free Cultural Works ✔ | Meets Open Definition

ppe-straps-both-elongated-attachment-holes.stl