xt1200z super ténéré accessories...
TRANSCRIPT
XT1200Z Super Ténéré Accessories Overviewwww.yamaha-motor-acc.com
Model year: 2010-2011
Inner Bag Ténéré Side CaseExpandable inner bag for Ténéré side cases
Specially designed to fi t the side cases of the Super Ténéré and XT660Z Ténéré• Allows easy loading and unloading of luggage from side cases• Integrated hand grips and additional shoulder strap for easy transportation• Double zipper large opening for easy access• Designed to complement side cases• Expandable volume 22L to 24L•
11D-W0753-00-00Article number:
Specifi cationsMaterial Solid fabric and canvas
Dimensions 400 x 340 x 180 mm
Certifi ed conformity (CE/TÜV/WVTA) N/A
Aluminium Top Case 30L Aluminium top case to be mounted at the rear of the unit
Strong robust top case in familiar Ténéré styling• Special dedicated design enhances the unit’s outdoor adventure image• Large water resistant 30L capacity, able to store a full face helmet• One key operation system, lock included• Matches optional Super Ténéré side cases• Optional inner bag available (article nr. 11D-W0756-00-00)•
23P-W0754-00-00Article number:
Specifi cationsMaterial Anodized aluminium (panels and lid). Strong nylon (frame)
Dimensions 442 x 354 x 306 mm
Weight 4,3 kg
Certifi ed conformity (CE/TÜV/WVTA) N/A
Mounting hardware Not required
Aluminium side cases Super TénéréAluminium side cases to be placed on either side of the rear of the Ténéré
Strong robust side cases in familiar Ténéré styling• Special dedicated design enhances unit’s outdoor adventure image• Large water resistant 32L capacity per side• One key operation system, lock included• Complements Super Ténéré top case• Optional inner bag available (article nr. 11D-W0753-00-00)•
23P-W0751-1L-00 Left side case23P-W0751-1R-00 Right side case23P-F84G0-00-00 Side case stay kit
Article number: Specifi cationsMaterial Anodized aluminium (panels and lid). Reinforced nylon (frame)
Certifi ed conformity (CE/TÜV/WVTA) N/A
Mounting hardware Side case stay kit (article nr. 23P-F84G0-00-00) is required
Inner Bag Top Case TénéréInner bag for top case
Specially designed and dedicated to the top case of the Super Ténéré and XT660Z Ténéré• Allows easy loading and unloading of luggage from the top case• Integrated hand grips• Additional shoulder straps for easy transportation• Large opening for easy access•
11D-W0756-00-00Article number:
Specifi cationsMaterial Solid fabric and canvas
Dimensions Appr. 320 x 310 x 260 mm
Certifi ed conformity (CE/TÜV/WVTA) N/A
Tank Bag Super TénéréTank-mounted luggage carrier
Detachable belt-mounted bag for small items like wallets or mobile phones • Holder for map and rain cover included • Expandable volume (from 20 to 25L)• Strong material, anti-slip bottom and strong mounting magnet• Shoulder strap for easy carrying• Easy to mount and detach•
23P-W0750-00-00Article number:
Specifi cationsMaterial Canvas & Fabric
Certifi ed conformity (CE/TÜV/WVTA) N/A
Mounting hardware Included in package
Skid Plate Super TénéréProtection plate to be placed under the engine
Protects underside of engine from the impact of small stones• Specially designed for this unit• Easy installation• Replaces standard plastic skid plate•
23P-F84R0-00-10Article number:
Specifi cationsMaterial 3 mm aluminium
Dimensions 485 x 403 x 177 mm
Certifi ed conformity (CE/TÜV/WVTA) N/A
Mounting hardware Included in package
Engine Guard Super TénéréGuard is placed around the engine to protect it
Minimises damage if bike is accidentally dropped• Strong steel tubes• Easy installation• Holds optional fog lamp kit (article nr. 23P-854A3-00-00)•
Specifi cationsMaterial Steel tubes, black powder coated
Certifi ed conformity (CE/TÜV/WVTA) N/A
Mounting hardware Included in package
23P-F43B0-00-10Article number:
Fog Lamp Kit Super TénéréFog lamps for better vision in bad weather conditions
Set of 2 PIAA fog lamps, 55 Watt each• Easy installation – can be attached directly to unit (underneath the headlight) or on optional engine guard • (article nr. 23P-F43B0-00-10)Light beam adds complementary, wider coverage to standard beam – for better visibility and improved safety•
Specifi cationsMaterial “Multi refl ector” and 85 mm diameter clear lens
Dimensions Diameter 85 mm
Certifi ed conformity (CE/TÜV/WVTA) CE-approved (Class F3) and WVTA-approved
Mounting hardware Included in package
23P-854A3-00-00Article number:
High Screen Super TénéréHigher screen to replace standard windscreen
Offers improved wind protection for comfortable touring, with three adjustable height positions• Easy installation•
Specifi cationsMaterial 4 mm hardcoated polycarbonate
Dimensions 509 x 398 x 117 mm
Certifi ed conformity (CE/TÜV/WVTA) WVTA-approved
23P-F83J0-00-10Article number:
Wind Defl ector Kit Super TénéréWind defl ector for placement beside windscreen
Optimised wind protection for more comfortable touring• Ideal for use with the Super Ténére optional higher wind screen (article nr. 23P-F83J0-00-10)• Easy installation – perfect fi t for the unit•
23P-F83M0-00-10Article number:
Specifi cationsMaterial 4 mm hardcoated polycarbonate
Certifi ed conformity (CE/TÜV/WVTA) WVTA-approved
Mounting hardware Included in package
Headlight Protector Super TénéréScreen to be placed in front of the Super Ténéré’s headlight
Protects headlight against impact of small stones• For off-road use only!• Made of strong durable material• Easy installation and removal – no tools required•
Specifi cationsMaterial 3 mm polycarbonate with anodized aluminium stays
Certifi ed conformity (CE/TÜV/WVTA) For off-road use only !
Mounting hardware Not required. Mounting instructions included in the package
23P-H4105-00-10Article number:
LED Flashers Set of 2 stylish fl ashers to replace the standard fl ashers
Unique, stylish design by GK Design specially for Yamaha• Including blinker speed regulating resistor • 9 LEDs per blinker • 55cm long wire with shrink sleeve • Fits most Yamaha motorcycles except the FJR and cruiser models• Available in 3 variations: black, chrome and carbon-look•
YME-W0789-00-00 BlackYME-W0789-10-00 ChromeYME-W0789-20-00 Carbon-look
Article number: Specifi cationsMaterial ABS housing, polycarbonate lens
Dimensions 86 x 35 x 30 mm
Certifi ed conformity (CE/TÜV/WVTA) CE-approved
Mounting hardware Included in package (brackets, tie-wraps and connectors)
Tank Pad Super Ténéré Protection pad for fuel tank
Protects fuel tank from being scratched by rider’s jacket zipper• Emphasises unit’s adventure styling• Strong durable material • Unique design, based on Ténéré concept model shown at 2009 Tokyo Motor show•
23P-W0790-00-00Article number:
Specifi cationsMaterial Polyurethane
Dimensions 200 x 125 mm
Low Seat for Super TénéréLower, narrower replacement of standard seat
Narrower design for better ground access • 35mm lower than original seat positions • Especially designed to fi t the Super Ténéré • Strong durable material• Available in two variations•
23P-247C0-00-00 Black/silver grey23P-247C0-10-00 Black
Article number: Specifi cationsMaterial Same as original seat
Certifi ed conformity (CE/TÜV/WVTA) N/A
Mounting hardware Not required
Grip Heater Super TénéréElectrically heated hand grips
Seamlessly fi ts the Super Ténéré• Warms hands during cold riding conditions• Auto shut-off function conserves battery life• Switch bracket included• Stepless temperature control•
23P-829A0-00-00Article number:
Specifi cationsCertifi ed conformity (CE/TÜV/WVTA) N/A
Mounting hardware Included in package
YEC-40 Battery ChargerCharger that can charge the battery of your Yamaha motorcycle, scooter, ATV, SMB and/or marine products
Contains unique battery charging technology. Fully automatic switch mode charger that analyses the state of • the battery, charges and automatically switches to maintenance charging when readyDesigned for safety: spark-free, protected from reverse polarity connections and short-circuit proof• Light and compact; handy and easy to store• Specially tested and approved by Yamaha service engineers to fi t our range of motorcycles, scooters, ATV, SMB • and other productsPatented method for desulphation; extends life of the battery• Also separately available: 1) indicator plug with long cable and “traffi c-light” style battery indicator • 2) built-in panel plug with extra long cable to mount in the dashboard of your Yamaha 3) Indicator panel 150, a combination of the indicator plug and built-in panel plug with long cable
YME-YEC40-EU-00 EU-plugYME-YEC40-UK-00 UK-plug
Article number: Specifi cationsType 8 step, fully automatic switch model with pulse maintenance
Dimensions 168 x 65 x 38 mm
Weight 0,6 kg
Certifi ed conformity (CE/TÜV/WVTA) CE-approved
Battery charge capacity 1.2-90 Ah
YEC-8 Battery Charger Charger that can charge the battery of your Yamaha motorcycle, scooter, ATV, SMB and/or Marine products
Contains unique battery charging technology. Fully automatic switch mode charger that analyses the state of • the battery, charges and automatically switches to maintenance charging when readyDesigned for safety: spark-free, protected from reverse polarity connections and short-circuit proof• Light and compact; handy and easy to store• Specially tested and approved by Yamaha service engineers to fi t our range of motorcycles, scooters, ATV, SMB • and other productsPatented method for desulphation; extends life of the battery• Also separately available: 1) indicator plug with long cable and “traffi c-light” style battery indicator • 2) built-in panel plug with extra long cable to mount in the dashboard of your Yamaha 3) Indicator panel 150, a combination of the indicator plug and built-in panel plug with long cable
YME-YEC08-EU-00 EU-plugYME-YEC08-UK-00 UK-plug
Article number: Specifi cationsType 4 step, fully automatic switch model with pulse maintenance
Dimensions 140 x 50 x 38 mm
Weight 0,6 kg
Certifi ed conformity (CE/TÜV/WVTA) CE-approved
Battery charge capacity 1.2-32Ah
YEC Indicator Panel 150Combines a battery charger built-in plug and a battery charge indicator into one
Connects to the battery chargers YEC-8 and YEC-40• Allows a neat, solid connection point rather than a fl ying lead connection• ‘Traffi c light’ style LED indication: green, orange, red• 1.5 m extra long cable to allow installation of connector to almost anywhere on your bike• Rubber grommet to keep dirt out of connector• Equipped with an inline fuse for extra safety•
YME-YECIP-15-00 Article number:
Specifi cationsDimensions 42 x 23 x 55 mm
Weight ~100 gr
Certifi ed conformity (CE/TÜV/WVTA) N/A
Mounting hardware Not required. Instructions for use included in package
YEC Battery Charger Built-in Panel PlugSmart and easy plug for connection from panel mount socket at the dashboard to the YEC-8 or YEC-40 battery chargers
Allows a neat, solid connection point rather than a fl ying lead connection• 1.5 m extra long cable to allow installation of connector to almost anywhere on your bike• Rubber grommet to keep dirt out of connector• Equipped with an inline fuse for extra safety•
YME-YECPA-15-00 Article number:
Specifi cationsDimensions 42 x 23 x 55 mm
Weight ~100 gr
Certifi ed conformity (CE/TÜV/WVTA) N/A
Mounting hardware Not required. Instructions for use included in package