XFP Transceiver Module

Description

XFP modules are hot-swappable andprotocol-independent. They typically operate atnear-infrared wavelengths of 850 nm, 1310 nm or 1550nm. Principal applications include 10 Gigabit Ethernet, 10Gbit/s Fibre Channel, SONET/ OC-192 rates, SDH/STM-64, 10Gbit/s Optical Transport Network (OTN)OTU-2, and parallel optics links. They can operate over asingle wavelength or use dense wavelength-divisionmultiplexing techniques. They include digital diagnosticsthat provide management that were added to theSFF-8472 standard. XFP modules use an LC fiberconnector type to achieve high density.Transceiver for CWDM, DWDM, PON, and BIDI devicesare all available here. Also, the Transceiver Module weoffer, has a great compatibility which ensure our can becompatible with all the major device provider like Cisco,HP, Juniper, Huawei, Nortel, Extreme, etc.

Feature

Hot pluggable Support 9.95Gb/s to 11.1Gb/S bit rates XFP MSA package with duplex LC connector DDMI(digital diagnostic monitor interface) function

integrated Very low EMI and excellent ESD protection +3.3V single power supply Less than 3.5W power dissipation With pull de-latch Transmission distance up to 40Km with 9/125um SMF -5~70°C case operate temperature range No reference clock requirement Complies with RoHS directive (2002/95/EC)

Application SDH/SONET SAN(Stroage Area Network) 10G Fiber Channel

CWDM System DWDM System 10GE(10000Base Ethernet) 10G OTN(Optical Transport )

Dual Ports XFP Transceiver Module

The most common type of XFP Module, widelyused in SDH/SONET, 10000Base Ethernet and 10GFiber Channel 10G OTN(Optical Transport ).Fibercasa provides 300m~120km all range XFPmodule. To the different detection and transmissionrequirements, we offers VCSEL, FP, DFB, EML laser transmitters as well PINand APD receivers. And all the transceivers Fibercasa offers are with a DDMIfunction.

Typical Duplex Ports SFP ModuleModel DescriptionFC-048-010-85-M300-D-LC-C-Y-XX-001

10Gbps, 850nm/MMF XFP Module, 300m, dual LC ports, VCSELTransmitter, PIN Receiver, 0~70℃ working temperature, with DDM

FC-048-010-13-0010-D-LC-C-Y-XX-001

10Gbps, 1310nm/SMF XFP Module, 10km, dual LC ports, DFBTransmitter, PIN Receiver, 0~70℃ working temperature, with DDM

FC-048-010-15-0040-D-LC-C-Y-XX-001

10Gbps, 1550nm/SMF SFP Module, 40km, dual LC ports, EMLTransmitter, PIN Receiver, 0~70℃ working temperature, with DDM

FC-048-010-15-0080-D-LC-C-Y-XX-001

10Gbps, 1550nm/SMF SFP Module, 80km, dual LC ports, EMLTransmitter, PIN Receiver, 0~70℃ working temperature, with DDM

Single Port BIDI SFP Transceiver Module

Single port BIDI XFP Module has the ability to coupleTx and Rx signals in one fiber, so it only need one port.But this technique also requires the wavelengths of Txand Rx used on the corresponding end is exactlyreverse to it. For example, if we use Tx 1310nm/ Rx1550nm on one side, we must use Tx 1550nm/ Rx1310nm on the other side.So, as the features statemented above, we only offer the products as a pairwhich means the BIDI XFP is provided 2pcs as a pair to reduce the risk ofincompatible between two BIDI Module.Fibercasa provides 300m~120km all range XFP module. To the differentdetection and transmission requirements, we offers VCSEL, FP, DFB, EMLlaser transmitters as well PIN and APD receivers. And all the transceiversFibercasa offers are with a DDMI function.

Typical BIDI SFP Module No.1Model DescriptionFC-048-010-12/13-0015-D-LC-C-Y-XX-001

10Gbps, 1270Tx/1310Rx BIDI XFP Module, 15km, single LC ports,DFB Transmitter, PIN Receiver, 0~70℃ working temperature, with DDM

FC-048-010-13/12-0015-D-LC-C-Y-XX-001

10Gbps, 1310Tx/1270Rx BIDI XFP Module, 15km, single LC ports,DFB Transmitter, PIN Receiver, 0~70℃ working temperature, with DDM

Typical BIDI SFP Module No.2Model DescriptionFC-048-010-12/13-0040-D-LC-C-Y-XX-001

10Gbps, 1270Tx/1310Rx BIDI XFP Module, 40km, single LC ports,DFB Transmitter, PIN Receiver, 0~70℃ working temperature, with DDM

FC-048-010-13/12-0040-D-LC-C-Y-XX-001

10Gbps, 1310Tx/1270Rx BIDI XFP Module, 40km, single LC ports,DFB Transmitter, PIN Receiver, 0~70℃ working temperature, with DDM

CWDM XFP Transceiver Module

CWDM SFP Module is commonly used in a CoarseWavelength Division Multiplexing system. FibercasaOffers all 18 channels CWDM SFP Module which thecenter wavelength is from 1270 to 1610 with eachchannel spacing of 20nm.Consider the attenuation features of the earlyG.652 Fiber in 1270 to 1470 band, 1470 to 1610 CWDM SFP Modules aremore recommended(this problem is solved on newer G.652D and G.657fiber)Fibercasa provides 300m~120km all range SFP module. To the differentdetection and transmission requirements, we offers VCSEL, FP, DFB, EMLlaser transmitters as well PIN and APD receivers. And all the transceiversFibercasa offers are with a DDMI function.

Typical CWDM XFP ModuleModel DescriptionFC-048-010-CXX-0040-D-LC-C-Y-XX-001

10Gbps, CWDM XFP Module, 1270~1610nm with each spcing of20nm, 40km, dual LC ports, EML Transmitter, PIN Receiver,0~70℃ working temperature, with DDM

FC-048-010-CXX-0080-D-LC-C-Y-XX-001

10Gbps, CWDM SFP Module, 1270~1610nm with each spcing of20nm, 80km, dual LC ports, EML Transmitter, PIN Receiver,0~70℃ working temperature, with DDM

Note: CXX is the Channel Wavelength Mark. Here, CXX can be C27~C61

DWDM XFP Transceiver Module

DWDM XFP Module is commonly used in a DenseWavelength Division Multiplexing system. FibercasaOffers 100Ghz DWDM XFP Module.The DWDM Module channels are divided bytransmission frequency. Usually it’s from 191.7THzto 196.1THz and each channel is divided by100GHzFibercasa provides 300m~120km all range XFP module. To the differentdetection and transmission requirements, we offers VCSEL, FP, DFB, EMLlaser transmitters as well PIN and APD receivers. And all the transceiversFibercasa offers are with a DDMI function.Typical DWDM XFP ModuleModel DescriptionFC-048-010-DXX-0040-D-LC-C-Y-XX-001

10Gbps, DWDM XFP Module, Ch17~Ch61 100GHz (1563.86 ~1528.77nm), 40km, dual LC ports, EML Transmitter, PIN Receiver,0~70℃ working temperature, with DDM

FC-048-010-DXX-0080-D-LC-C-Y-XX-001

10Gbps, DWDM XFP Module, Ch17~Ch61 100GHz (1563.86 ~1528.77nm), 80km, dual LC ports, EML Transmitter, PIN Receiver,0~70℃ working temperature, with DDM

Note: DXX is the Channel Frequency Mark. Here, CXX can be D17~D61