x-treme shank hsk x-treme chuck (inch series) x-treme cat2880.pdf · japan,eu pat. usa.china. pat.p...
TRANSCRIPT
U.S.A LYNDEX-NIKKENTel.+1-847-367-4800
MEXICO HERRAMIENTAS LYNDEX-NIKKEN S.A.de C.V.Tel.+52-55-8421-8421
FRANCE PROCOMO-NIKKEN S.A.STel.+33-(0)-1-69.19.17.35
UK NIKKEN KOSAKUSHO UK LTD.Tel.+44-(0)-1709-366306
F.R.GERMANY NIKKEN DEUTSCHLAND GmbHTel.+49-(0)-6142-550600
ITALY VEGA INTERNATIONAL TOOLS S.P.ATel.+39-011-9497911
SWITZERLAND NIKKEN SWITZERLAND AGTel.+41-(0)-41-748-5000
SCANDINAVIA NIKKEN SCANDINAVIA ABSWEDEN Tel.+46-(0)-303-440-600SPAIN CUTTING TOOL S.L (TOOLING)
Tel.+34-(0)-902-820090PORTUGAL NIKKEN EUROPE DIVISORES ESPANA (CNC ROTARY TABLE)
Tel.+34-(0)-669-603433D.JB.5
TURKEY NIKKEN KESICI TAKIMLAR SAN. VE ULUSLARARASI TIC. A.STel.+90-(0)-216-518-1010
KOREA KOREA NIKKEN LTD.Tel.+82-(0)-32-763-4461
P.R.CHINA SHANGHAI ZHONG YAN TRADING CO., LTDTel.+86-(0)-216210-2506
SINGAPORE NIKKEN KOSAKUSHO ASIA PTE, LTDTel.+65-6362-7980
THAILAND SIAM NIKKEN Co., LTD.Tel.+66(02)178-0503
http://www.nikken-kosakusho.co.jpe-mail:[email protected]
■Please give your order to the following agent.
NIKKEN KOSAKUSHO WORKS,LTD. OSAKA, JAPAN.5-1, 1-chome, Minamishinden, Daito-shi, Osaka-fu, Japan. Telephone:+81(0)72-869-5820 Telefax:+81(0)72-869-6220
Lℓ2
φC1φD
Material: Ti6Al4V Titaniumφ25mm, 6teethCarbide Roughing End Millφ25 X Depth 50mm 1 Path MillingNever Pull-Out
2525mmmm
mmmm5050
PAT.P
Please use direct chucking without KM collet.★ MAX. 7MPa of center through coolant is available with the stopper.★ Please use J-type X-Treme chuck, when end mill without oil hole is used. eg) HSK100A-C1 1/4EX-120-J In case of J-type X-Treme chuck, J-type stopper and J-type face cap (with Jet grooves) are attached. 9MC1 1/4HEX-7L-J, 9C1 1/4L-FS-EX-J J-type X-Treme chuck is used for the pocket milling and side milling.
*1 Please contact us for the stopper for X-Treme chuck Inch series.*2 The Code No. of the stopper for NBT40-C20EX,HSK63A-C20EX and C8-C20EX is MC20HEX-7L-J★ X-Treme chuck with nose ring for C spanner is available as an option. Please add "-A" at the end of Code No. eg) NBT50-C25EX-115-J-A
Nose ring with C spanner
Photo shows HSK Shank.
Centre Through MAX. 7MPa
Please select the proper stopper and the face cap according to your application. (end mill with/without coolant hole) The stopper and the face cap for the end mill with oil hole are attached as standard accessory.
■Selection of the Accessories
HSK100A
TAPER ℓ2
576770768285
L
95105115115120135
C1
404855556886
Weight(kg)
2.73.03.63.54.05.7
Handle
GH16GH20GH25GH25GH329HC42
NCAT50
576770768285
95105105110115125
404855556886
4.04.45.04.85.36.6
GH16GH20GH25GH25GH329HC42
HSK100A-C 1/2EX- 95-C 5/8EX-105-C 3/4EX-115-C1 EX-115-C1 1/4EX-120-C1 1/2EX-135
NCAT50-C 1/2EX- 95U-C 5/8EX-105U-C 3/4EX-105U-C1 EX-110U-C1 1/4EX-115U-C1 1/2EX-125U
Code No.(φD - L)
End mill with oil holeStopper*
9MC 1/2HEX- 6L9MC 5/8HEX-6.5L9MC 3/4HEX- 7L9MC 25HEX-6.2L9MC1 1/4HEX- 7L9MC1 1/2HEX- 9L
Face cap*9C 1/2SL-FS-EX-A9C 16SL-FS-EX-A9C 3/4-FS-EX-A9C 1SL-FS-EX-A9C1 1/4SL-FS-EX-A9C1 1/2SL-FS-EX-A
9MC 1/2HEX- 6L9MC 5/8HEX-6.5L9MC 3/4HEX- 7L9MC 25HEX-6.2L9MC1 1/4HEX- 7L9MC1 1/2HEX- 9L
9C 1/2SL-FS-EX-A9C 16SL-FS-EX-A9C 3/4-FS-EX-A9C 1SL-FS-EX-A9C1 1/4SL-FS-EX-A9C1 1/2SL-FS-EX-A
C12EXC16EXC20EXC25EXC32EXC42EX
Stopper9C12SL-FS-EX-A9C16SL-FS-EX-A9C20 -FS-EX-A9C25SL-FS-EX-A9C32SL-FS-EX-A9C42SL-FS-EX-A
Face cap9MC12HEX- 6L-J9MC16HEX- 6.5L-J
9MC20HEX- 12L-J*29MC25HEX- 6.2L-J9MC32HEX- 7L-J9MC42HEX- 9L-J
Stopper*19C12SL-FS-EX-J9C16SL-FS-EX-J9C20 -FS-EX-J9C25SL-FS-EX-J9C32SL-FS-EX-J9C42SL-FS-EX-J
Face cap (V grooves)*1
-
M12 × 20L
M16 × 20L
Drive boltEnd mill with oil hole End mill without oil hole
FSMB10-16FSMB12-16-H8FSMB12-20
FSMB16-20-H8
Support bolt
12EX-○○○-A16EX-○○○-A20EX-○○○-A25EX-○○○-A32EX-○○○-A42EX-○○○
Chuck9HC169HC229HC259HC259HC329HC42
Handle
Explanation of the Code No.HSK100A C1 1/4EX 120
Nominal Gauge LengthX-Treme Chuck
J: J-Type (Jet Groove)
Symbol of Milling ChuckChucking Capacity
Shank No.
J
Industry proven to eliminate Pull-Out.Exclusively developed for demandingApplications and materials associated With the aircraft and energy industry.
* Inch series is for USA and semi-standard items.
O-ringPlease insert the stoper which small hole diameter is located at the end mill side. (C42: Same hole diameter)
Cross groovePlease insert the stoper which cross groove is located at the end mill side.
NIKKEN KOSAKUSHO WORKS, LTD.2880
Excellent Run-out
Powerful Gripping&
JAPAN,EU PAT.USA.CHINA. PAT.P
X-Treme Shank HSK X-Treme Chuck (INCH Series)
9MC12HEX- 6L9MC16HEX- 6.5L 9MC20HEX- 12L※29MC25HEX- 6.2L9MC32HEX- 7L9MC42HEX- 9L
X-Treme Shank NBT X-Treme Chuck
X-Treme Shank NBT X-Treme Chuck
U.S.A LYNDEX-NIKKENTel.+1-847-367-4800
MEXICO HERRAMIENTAS LYNDEX-NIKKEN S.A.de C.V.Tel.+52-55-8421-8421
FRANCE PROCOMO-NIKKEN S.A.STel.+33-(0)-1-69.19.17.35
UK NIKKEN KOSAKUSHO UK LTD.Tel.+44-(0)-1709-366306
F.R.GERMANY NIKKEN DEUTSCHLAND GmbHTel.+49-(0)-6142-550600
ITALY VEGA INTERNATIONAL TOOLS S.P.ATel.+39-011-9497911
SWITZERLAND NIKKEN SWITZERLAND AGTel.+41-(0)-41-748-5000
SCANDINAVIA NIKKEN SCANDINAVIA ABSWEDEN Tel.+46-(0)-303-440-600SPAIN CUTTING TOOL S.L (TOOLING)
Tel.+34-(0)-902-820090PORTUGAL NIKKEN EUROPE DIVISORES ESPANA (CNC ROTARY TABLE)
Tel.+34-(0)-669-603433D.JB.5
TURKEY NIKKEN KESICI TAKIMLAR SAN. VE ULUSLARARASI TIC. A.STel.+90-(0)-216-518-1010
KOREA KOREA NIKKEN LTD.Tel.+82-(0)-32-763-4461
P.R.CHINA SHANGHAI ZHONG YAN TRADING CO., LTDTel.+86-(0)-216210-2506
SINGAPORE NIKKEN KOSAKUSHO ASIA PTE, LTDTel.+65-6362-7980
THAILAND SIAM NIKKEN Co., LTD.Tel.+66(02)178-0503
http://www.nikken-kosakusho.co.jpe-mail:[email protected]
■Please give your order to the following agent.
NIKKEN KOSAKUSHO WORKS,LTD. OSAKA, JAPAN.5-1, 1-chome, Minamishinden, Daito-shi, Osaka-fu, Japan. Telephone:+81(0)72-869-5820 Telefax:+81(0)72-869-6220
Lℓ2
φC1φD
Material: Ti6Al4V Titaniumφ25mm, 6teethCarbide Roughing End Millφ25 X Depth 50mm 1 Path MillingNever Pull-Out
2525mmmm
mmmm5050
PAT.P
Please use direct chucking without KM collet.★ MAX. 7MPa of center through coolant is available with the stopper.★ Please use J-type X-Treme chuck, when end mill without oil hole is used. eg) HSK100A-C1 1/4EX-120-J In case of J-type X-Treme chuck, J-type stopper and J-type face cap (with Jet grooves) are attached. 9MC1 1/4HEX-7L-J, 9C1 1/4L-FS-EX-J J-type X-Treme chuck is used for the pocket milling and side milling.
*1 Please contact us for the stopper for X-Treme chuck Inch series.*2 The Code No. of the stopper for NBT40-C20EX,HSK63A-C20EX and C8-C20EX is MC20HEX-7L-J★ X-Treme chuck with nose ring for C spanner is available as an option. Please add "-A" at the end of Code No. eg) NBT50-C25EX-115-J-A
Nose ring with C spanner
Photo shows HSK Shank.
Centre Through MAX. 7MPa
Please select the proper stopper and the face cap according to your application. (end mill with/without coolant hole) The stopper and the face cap for the end mill with oil hole are attached as standard accessory.
■Selection of the Accessories
HSK100A
TAPER ℓ2
576770768285
L
95105115115120135
C1
404855556886
Weight(kg)
2.73.03.63.54.05.7
Handle
GH16GH20GH25GH25GH329HC42
NCAT50
576770768285
95105105110115125
404855556886
4.04.45.04.85.36.6
GH16GH20GH25GH25GH329HC42
HSK100A-C 1/2EX- 95-C 5/8EX-105-C 3/4EX-115-C1 EX-115-C1 1/4EX-120-C1 1/2EX-135
NCAT50-C 1/2EX- 95U-C 5/8EX-105U-C 3/4EX-105U-C1 EX-110U-C1 1/4EX-115U-C1 1/2EX-125U
Code No.(φD - L)
End mill with oil holeStopper*
9MC 1/2HEX- 6L9MC 5/8HEX-6.5L9MC 3/4HEX- 7L9MC 25HEX-6.2L9MC1 1/4HEX- 7L9MC1 1/2HEX- 9L
Face cap*9C 1/2SL-FS-EX-A9C 16SL-FS-EX-A9C 3/4-FS-EX-A9C 1SL-FS-EX-A9C1 1/4SL-FS-EX-A9C1 1/2SL-FS-EX-A
9MC 1/2HEX- 6L9MC 5/8HEX-6.5L9MC 3/4HEX- 7L9MC 25HEX-6.2L9MC1 1/4HEX- 7L9MC1 1/2HEX- 9L
9C 1/2SL-FS-EX-A9C 16SL-FS-EX-A9C 3/4-FS-EX-A9C 1SL-FS-EX-A9C1 1/4SL-FS-EX-A9C1 1/2SL-FS-EX-A
C12EXC16EXC20EXC25EXC32EXC42EX
Stopper9C12SL-FS-EX-A9C16SL-FS-EX-A9C20 -FS-EX-A9C25SL-FS-EX-A9C32SL-FS-EX-A9C42SL-FS-EX-A
Face cap9MC12HEX- 6L-J9MC16HEX- 6.5L-J
9MC20HEX- 12L-J*29MC25HEX- 6.2L-J9MC32HEX- 7L-J9MC42HEX- 9L-J
Stopper*19C12SL-FS-EX-J9C16SL-FS-EX-J9C20 -FS-EX-J9C25SL-FS-EX-J9C32SL-FS-EX-J9C42SL-FS-EX-J
Face cap (V grooves)*1
-
M12 × 20L
M16 × 20L
Drive boltEnd mill with oil hole End mill without oil hole
FSMB10-16FSMB12-16-H8FSMB12-20
FSMB16-20-H8
Support bolt
12EX-○○○-A16EX-○○○-A20EX-○○○-A25EX-○○○-A32EX-○○○-A42EX-○○○
Chuck9HC169HC229HC259HC259HC329HC42
Handle
Explanation of the Code No.HSK100A C1 1/4EX 120
Nominal Gauge LengthX-Treme Chuck
J: J-Type (Jet Groove)
Symbol of Milling ChuckChucking Capacity
Shank No.
J
Industry proven to eliminate Pull-Out.Exclusively developed for demandingApplications and materials associated With the aircraft and energy industry.
* Inch series is for USA and semi-standard items.
O-ringPlease insert the stoper which small hole diameter is located at the end mill side. (C42: Same hole diameter)
Cross groovePlease insert the stoper which cross groove is located at the end mill side.
NIKKEN KOSAKUSHO WORKS, LTD.2880
Excellent Run-out
Powerful Gripping&
JAPAN,EU PAT.USA.CHINA. PAT.P
X-Treme Shank HSK X-Treme Chuck (INCH Series)
9MC12HEX- 6L9MC16HEX- 6.5L 9MC20HEX- 12L※29MC25HEX- 6.2L9MC32HEX- 7L9MC42HEX- 9L