x-joint building expansion joint systems · expansion joint for use in walls and ceilings in...

1 www.x-calibur.us

X-Joint Building Expansion Joint SystemsJan 2018

TheCompleteJoint SystemSolution

2 www.x-calibur.us

Contents

S e le ct io n C h art

Floor Joint Profi les

T ile s & S cre e d

Wall & Ceiling Profi les

Roof Profi les

C lip S t rip s

J o in t S e als

S t air N o sin g s

F lo o r S k irt in g

3 - 6

7 - 1 9

2 0 - 2 4

2 5 - 3 1

3 2 - 3 4

3 5

3 6 - 3 8

3 9

4 0

Page

N o t e t o A rch it e ct s an d I n t e rio r D e sig n e rsWe can supply all our profi les and insert incustom colours to match the interior design.

3 www.x-calibur.us

X-Joint Profiles Selection Chart

PageProfile Name

Floor Joint Profiles

X -J o in t F H D -S FHeavy duty joint covers for use in car parks, warehouses and ramps. Installed after completion of the final floor finish.

X -J o in t F H D 2 -S FHeavy duty expansion joint for use in car parks, warehouses and ramps. Lower profile than FHD-SF. Installed after completion of the final floor.

X -J o in t F H D -B SHigh load capacity flush fit expansion joints for use on industrial floorssubject to slow moving traffic (cars, trucks, forklifts, trolleys etc). Installed beneath the screed.

X -J o in t F M D -S F Medium duty joint covers for use in areas subject to heavy pedestrian and slow moving vehicular traffic. Installed after completion of the final floor finish.

X -J o in t F M D 2 -S F Medium duty expansion joints for use in areas subject to heavy pedestrian and slow moving vehicular traffic. Installed after completion of the final floor finish.

X -J o in t F M D -B S Medium load capacity flush fit expansion joint for floors in areas subject heavy pedestrian and slow moving cars. Installed beneath the screed.

X -J o in t F R A -B S Water resistant expansion joints for heavy pedestrian and slow moving vehicular traffic. Installed beneath the screed.

X -J o in t F R A -S F Water resistant expansion joints for heavy pedestrian and slow moving vehicular traffic. Installed after completion of the final floor finish.

X -J o in t F L P -2 B S Stainless steel finish expansion joints for use with high end floor finishes. Installed beneath screed.

X -J o in t C P S -F High movement (seismic) expansion joint covers for use in car parks and areas subject to vehicular traffic. Installed after completion of the final floor finish.

X -J o in t C P S -R High movement (seismic) expansion joint covers for use in car parks and areas subject to vehicular traffic. Installed beneath the screed.

X -J o in t F S J -B S Large movement seismic expansion joints for use in high end floor finishes with minimum effect of the appearance of the floor. Installed beneath the floor screed.

X -J o in t F F J -B S Large movement seismic expansion joints for use with thin floor finishes, such as tile, vinyl or carpet, with minimum effect of the appearance of the floor. Installed beneath the floor screed.

7

8

9

1 0

1 1

1 2

1 3

1 4

1 5

1 6

1 7

1 8

1 9

4 www.x-calibur.us

X -J o in t C J 1Anodized aluminum neoprene construction joint for use with tiles and stone. Installed when floor finish is being laid.

X -J o in t C J 2 Anodized aluminum neoprene construction joint for use with tiles and stone. Installed beneath the screed.

X -J o in t C J 3 Stainless steel neoprene construction joint for use with tiles and stone. Installed when floor finish is being laid.

X -J o in t C J 4 Anodized aluminum polyurethane/polyethylene construction joint for use with tiles and stone. Accepts higher movement than neoprene. Installed when floor finish is being laid.

X -J o in t A J S Extruded anodized aluminium joint separators for screed and floor finishes.

Tile & Screed

Wall & Ceiling Profiles

and interior joints on �

joints on � �xings.

X -J o in t C W J 3

to provide a ush �nish with no visible �xings.

nished wall

X -J o in t S W J I Extruded anodized joint covers used to cover exterior

nished walls and ceilings.

X -J o in t C W J I Extruded anodized joint covers used to cover exterior and interior

nished walls and ceilings, with no visible

X -J o in t S W J 2 High movement capacity anodized aluminum/PVC weather seal expansion joint for use in walls and ceilings in internal and external applications.

X -J o in t C W J 2 Anodised aluminum expansion joint with integrated weather seal for use in wall and ceilings. Installed beneath the plaster or wall board

�

X -J o in t S W J 3 Anodised aluminum expansion joint with integrated weather sealfor use in wall and ceilings. Fixed directly on to the �surface.

Anodised aluminum/PVC �oor expansion joint with visble weatherseal for interior joints on walls and ceilings.Installed beneath the plaster or wall board to provide a �ush �nish with no visible �xings.

X -J o in t S W J 4 Anodised aluminum/PVC �oor expansion joint with visible weatherseal for interior joints on walls and ceilings.Fixed directly on to the �nishedwall surface.


PageProfile Name

2 0

2 1

2 2

2 3

2 4

2 5

2 6

2 7

2 8

2 9

3 0

3 1

5 www.x-calibur.us


PageProfile Name

5

X-Joint Profiles

Page

X -J o in t R J 1 Anodized aluminium fully waterproof joint system that is used on roofs that will be subject to pedestrian traf�c. It is used in joints widths of 1 5 mm to 1 0 0 mm.

X -J o in t R J 2 High movement ( seismic) anodised aluminium/PVC wall joint for use with a wall �nish up to 1 6 mm thick . J oint must be �xed on to a concrete or masonary substrate. X -J o in t R J 3 High movement ( seismic) anodised aluminium/PVC wall joint for use with a wall �nish up to 1 6 mm thick . J oint must be �xed on to a concrete or masonary substrate.

Selection Chart

Pro�le Name

Roof Profiles

ClipStrips

X -J o in t C lip S t rip F 4 5 C & F 5 5 C

X -J o in t C lip S t rip F 5 5 F , F 7 0 F & F 1 0 0 F

X -J o in t C lip S t rip W 7 0 C & W 1 0 0 C

X -J o in t C lip S t rip W 5 5 G

X -J o in t C lip S t rip C 5 0 & C 1 0 0

S p rin g C lip s S S 4 0 & S S 6 0

Extruded aluminum joint covers that are suitable for use in a widerange of internal and external applications.





For fixing X - J oint Clip Strip series

www.co rk j o in t .co m

3 2

3 3

3 4

3 5

6 www.x-calibur.us


6

X -J o in t E P S H D


PageProfile Name

3 6

3 7

3 8

3 9

4 0

7

X-Joint

www.x-calibur.us


Heavy Duty • Surface FixFHD-SF

7

CBAepyT

F lat P ro file

601104 ot 504/011 FS-DHF

855156 ot 1407/551 FS-DHF

9581001 ot 66001/581 FS-DHF

9 .5062051 ot 101051/062 FS-DHF

21523002 ot 151002/523 FS-DHF

X-Joint Floor Joint Profiles

FHD-SF

C o rn e r P ro file

FHD - SF/C 1 1 0 /4 0

9

9

6

1 2 2

1 2 26 4

7 1 to 1 0 0

5 to 4 0

4 1 to 7 0FHD - SF/C 1 5 5 /7 0

FHD - SF/C 1 8 5 /1 0 0

D imensions in mm

M at e rialsAnodized aluminium 6 0 6 3 /T 6 .Can also be supplied in mill fi nish aluminium.S up p ly L e n g t h s

4 m, custom lengths can be producedin order to minimize wastage.EPS J oint Seal: 2 0 m rollSupplied with stainless steel anchors and screws.

F H D -S F F H D -S F / C

D e scrip t io nHeavy duty joint covers for use in car park s, warehouses and ramps.

Installed after completion of the final floor finish. EPS System is optional.

SS Counter SunkAnchors & Screw

SS Counter SunkAnchors & Screws

X - T ite StrongSeal X - T ite StrongSealEPS

J oint Seal

EPS J oint Seal


Heavy Duty Screed Fix

8

X-Joint

www.x-calibur.us


Heavy Duty • Surface FixFHD2-SF

8


FHD2-SF Heavy Duty Surface Fix

D e scrip t io nHeavy duty expansion joint for use in car park s, warehouses and ramps.

Installed after completion of the final floor � nish.

M at e rialsAnodized aluminium 6 0 6 3 /T 6 .

S up p ly L e n g t h s4 m, custom lengths can be produced against minimum order.

T y p e A B C D T o t al M o v e m e n t

F lat P ro file

FHD 2 - SF 5 0 5 0 2 0 0 7 5 2 1 3 2

FHD 2 - SF 1 0 0 1 0 0 2 5 0 7 5 2 1 5 5

FHD 2 - SF 1 2 5 1 2 5 2 6 8 7 2 2 3 5 5

FHD 2 - SF 1 5 0 1 5 0 3 0 8 7 9 2 7 7 2D imensions in mm

FHD 2 - SF

F H D 2 -S F

pro� les have the same load capacity as FHD - B S series provided that, they are installed as shown in the drawing below.

F H D 2 -S F

X - T ite StrongB ond

SS Counter SunkAnchor & Screws

SS Counter SunkAnchor & Screws


9

X-Joint

www.x-calibur.us


Heavy Duty • Screed FixFHD-BS

9


FHD-BS Heavy Duty Screed Fix

D e scrip t io nHigh load capacity � ush � t expansion joint for use on industrial � oors subject to slow moving traf� c ( cars, truck s, fork lifts, trolleys etc) . Installed beneath the screed.

M at e rialsAnodized aluminium 6 0 6 3 /T 6 .


L o ad C ap acit yM axim um A xle L o ad :FHD - B S 5 0 : 6 tonsFHD - B S 7 5 : 5 tonsFHD - B S 1 0 0 : 4 tons

T y p e A B C D * T o t al M o v e m e n t

F lat P ro file

FHD - B S 5 0 5 0 8 4 1 5 8 2 8 3 0

FHD - B S 7 5 7 5 1 1 9 1 9 5 3 0 4 0

FHD - B S 1 0 0 1 0 0 1 4 4 2 3 2 3 0 5 0D imensions in mm * Pro� le height “ D ” can be increased using X - R oc R esiCrete S or X - T ite Strong B ond.

F H D -B S

M 1 0 Anchor in X - T ite R esiL oc E

X - T ite StrongB ondor X - R oc R esiCrete S


1 0

X-Joint

www.x-calibur.us


Medium Duty • Surface FixFMD-SF

1 0

Medium Duty • Surface Fix


FM D - SF/C 5 0 5 0 6 4 5 0 4 6 7

FM D - SF/C 7 5 7 5 1 2 0 5 0 4 1 2 0

FM D - SF/C 1 0 0 1 0 0 1 2 0 5 0 4 1 2 0

FM D - SF/C 1 0 0 1 0 0 1 7 0 5 0 4 1 7 0

FM D - SF/C 1 2 5 1 2 5 1 7 0 5 0 4 1 7 0

FM D - SF/C 1 5 0 1 5 0 2 0 5 5 0 6 1 7 0D imensions in mm


FMD-SF

D e scrip t io nExtruded aluminum joint covers for Fl oors in areas with heavy pedestrian traffi c.

M at e rialsAnodized aluminium 6 0 6 3 /T 6 .Can also be supplied in mill finish aluminium.J oint Seals: PVC

S up p ly L e n g t h sProfile: 4 mJ oint Seals: 2 0 m rollCustom lengths can be produced against minimum order.

T y p e A B C D T o t al M o v e m e n t *

F lat P ro file

FM D - SF 5 0 5 0 1 1 7 - 5 6 7

FM D - SF 7 5 7 5 1 7 0 - 5 1 2 0

FM D - SF 1 0 0 1 0 0 1 7 0 - 5 1 2 0

FM D - SF 1 2 5 1 2 5 2 6 0 - 6 1 7 0

FM D - SF 1 5 0 1 5 0 2 6 0 - 6 1 7 0

* M ovements depend on the cover plate width

F M D -S FF M D -S F / C

X - T ite StrongSealX - T ite

StrongSeal

EPS J oint Seal

CSK Headed Screws/Fischer Plugs

EPS J oint Seal



1 1

X-Joint

www.x-calibur.us


Medium Duty • Surface FixFMD2-SF

1 1


FMD2-SF


FM D 2 - SF/C 4 5 4 5 4 3 4 5 8 8 1 4 4 7 1 3

FM D 2 - SF/C 6 0 6 0 5 8 4 5 1 0 3 1 4 4 7 1 6

FM D 2 - SF/C 1 0 0 1 0 0 9 7 5 6 1 5 3 1 6 4 4 4 0

FM D 2 - SF/C 1 5 0 1 5 0 1 4 7 5 6 2 0 3 1 6 4 4 8 0D imensions in mm

T y p e A B C D E F T o t al M o v e m e n t

F lat P ro file

FM D 2 - SF 4 5 4 5 4 5 4 5 1 3 5 1 4 - 1 3

FM D 2 - SF 6 0 6 0 6 0 4 5 1 5 0 1 4 - 1 6

FM D 2 - SF 1 0 0 1 0 0 1 0 0 5 6 2 1 2 1 6 - 4 0

FM D 2 - SF 1 5 0 1 5 0 1 5 0 5 6 2 6 2 1 6 - 8 0

D e scrip t io nM edium duty expansion joint for use in areas subject to heavy pedestrian and slow moving vehicular traf� c.

Installed after completion of the � nal � oor � nish.

M at e rialsAnodized aluminium 6 0 6 3 /T 6Can also be supplied in mill � nish aluminium.


F M D 2 -S F F M D 2 -S F / C




www.co rk j o in t .co m1 0



FM D - SF/C 5 0 5 0 6 4 5 0 4 6 7

FM D - SF/C 7 5 7 5 1 2 0 5 0 4 1 2 0

FM D - SF/C 1 0 0 1 0 0 1 2 0 5 0 4 1 2 0

FM D - SF/C 1 0 0 1 0 0 1 7 0 5 0 4 1 7 0

FM D - SF/C 1 2 5 1 2 5 1 7 0 5 0 4 1 7 0

FM D - SF/C 1 5 0 1 5 0 2 0 5 5 0 6 1 7 0D imensions in mm


FMD-SF

D e scrip t io nExtruded aluminum joint covers for Fl oors in areas with heavy pedestrian traffi c.

M at e rialsAnodized aluminium 6 0 6 3 /T 6 .Can also be supplied in mill finish aluminium.J oint Seals: PVC

S up p ly L e n g t h sProfile: 4 mJ oint Seals: 2 0 m rollCustom lengths can be produced against minimum order.

T y p e A B C D T o t al M o v e m e n t *

F lat P ro file

FM D - SF 5 0 5 0 1 1 7 - 5 6 7

FM D - SF 7 5 7 5 1 7 0 - 5 1 2 0

FM D - SF 1 0 0 1 0 0 1 7 0 - 5 1 2 0

FM D - SF 1 2 5 1 2 5 2 6 0 - 6 1 7 0

FM D - SF 1 5 0 1 5 0 2 6 0 - 6 1 7 0

* M ovements depend on the cover plate width

F M D -S FF M D -S F / C

X - T ite StrongSealX - T ite

StrongSeal

EPS J oint Seal


EPS J oint Seal



1 2

X-Joint

www.x-calibur.us


Medium Duty • Screed FixFMD-BS

1 2


FMD-BS

D e scrip t io nM edium load capacity fl ush fi t expansion joint for � oors in areas subject to heavy pedestrian and slow moving cars.

Installed beneath the screed.

M at e rialsAnodized aluminium 6 0 6 3 /T 6Can also be supplied in mill fi nish aluminium.

S up p ly L e n g t h s4 m, custom lengths can be produced againtsminimum order.

T y p e A B C D E F T o t al M o v e m e n t

F lat P ro file

FM D - B S 3 5 3 5 4 5 3 5 1 1 5 1 6 /3 0 - 1 3

FM D - B S 5 0 5 0 6 0 3 5 1 3 0 1 6 /3 0 - 1 6

FM D - B S 1 0 0 1 0 0 1 1 4 4 8 2 1 0 1 7 /3 0 - 4 0

FM D - B S 1 5 0 1 5 0 1 6 4 4 8 2 6 0 1 7 /3 0 - 8 0


FM D - B S/C 4 0 4 0 4 2 3 5 7 7 1 6 /3 0 4 7 1 3

FM D - B S/C 5 0 5 0 5 2 3 5 8 7 1 6 /3 0 4 7 1 6

FM D - B S/C 1 0 0 1 0 0 1 0 4 4 8 1 5 2 1 7 /3 0 4 4 4 0

FM D - B S/C 1 5 0 1 5 0 1 5 4 4 8 2 0 2 1 7 /3 0 4 4 8 0D imensions in mm

C/SB-DMFSB-DMF

Medium Duty • Screed Fix


PAN Headed Screws/Fischer Plugs



1 3

X-Joint

www.x-calibur.us


Medium Duty • Sreed FixFRA-BS

www.x-calibur.us1 4

FRA-BS


D e scrip t io nExtruded expansion joint for heavy pedestrian.


M at e rialsAnodized aluminium 6 0 6 3 /T 6 .PVC J oint Seal

S up p ly L e n g t h sAluminium Pro

�le: 4 m

J oint Seal: 2 0 m rollsCustom lengths can be producedagainst minimum order.

P V C J o in t S e al C o lo ur

( O ther colors available subject to 5 0 0 m minimum order)

B lack B e ig e G re y

T y p e A B C D E * F T o t al M o v e m e n tF lat P ro fileFR A- B S 2 0 2 0 2 5 3 8 1 0 1 4 7 /7 2 - 1 2FR A- B S 3 0 3 0 3 5 4 5 1 2 5 3 1 /9 7 - 2 0FR A- B S 5 0 5 0 6 0 4 2 1 4 4 3 3 - 3 0FR A- B S 7 5 7 5 8 5 5 5 1 9 4 3 5 - 3 6FR A- B S 1 0 0 1 0 0 1 1 5 5 5 2 2 5 3 3 - 3 4FR A- B S 1 2 5 1 2 5 1 4 0 5 4 2 4 8 3 3 - 6 4FR A- B S 1 5 0 1 5 0 1 6 5 5 4 2 7 3 3 3 - 9 0C o rn e r P ro fileFR A- B S/C 2 0 2 0 2 2 3 8 6 0 4 7 /7 2 3 7 1 2FR A- B S/C 3 0 3 0 3 2 4 5 7 7 3 1 /9 7 6 3 2 0FR A- B S/C 5 0 5 0 5 5 4 2 9 7 3 3 6 3 3 0FR A- B S/C 7 5 7 5 8 0 5 5 1 3 5 3 5 6 8 3 6FR A- B S/C 1 0 0 1 0 0 1 0 7 5 5 1 6 2 3 3 8 3 3 4FR A- B S/C 1 2 5 1 2 5 1 3 2 5 4 1 8 6 3 3 8 3 6 4FR A- B S/C 1 5 0 1 5 0 1 5 7 5 4 2 1 1 3 3 8 3 9 0

D imensions in mm* O ther heights are available upon req uest

F R A -B S

F R A -B S / C

Medium Duty Screed Fix

X - T ite StrongSeal





1 4

X-Joint

www.x-calibur.us


Medium Duty • Surface FixFRA-SF

www.x-calibur.us1 5


T y p e A B C D E F T o t al M o v e m e n tF lat P ro file

FR A- SF 3 0 3 0 2 5 4 3 1 1 2 1 6 - 2 0FR A- SF 5 0 5 0 4 5 5 5 1 5 6 1 7 - 3 0FR A- SF 7 5 7 5 6 9 5 8 1 8 5 3 0 - 3 6FR A- SF 1 0 0 1 0 0 9 2 6 5 2 2 2 3 3 - 3 4FR A- SF 1 2 5 1 2 5 1 1 5 7 5 2 6 5 3 3 - 6 4FR A- SF 1 5 0 1 5 0 1 4 0 7 5 2 9 0 3 3 - 9 0


FR A- SF/C 3 0 3 0 2 6 4 3 6 9 1 6 6 3 2 0FR A- SF/C 5 0 5 0 4 6 5 5 1 0 1 1 7 6 3 3 0FR A- SF/C 7 5 7 5 6 5 5 8 1 2 3 3 0 6 8 3 6FR A- SF/C 1 0 0 1 0 0 9 6 6 5 1 6 1 3 3 8 3 3 4FR A- SF/C 1 2 5 1 2 5 1 1 6 7 5 1 9 1 3 3 8 3 6 4FAR - SF/C 1 5 0 1 5 0 1 4 1 7 5 2 1 6 3 3 8 3 9 0

D imensions in mm

D e scrip t io nExtruded expansion joint for heavy pedestrian and slow moving vehicular traffi c.

Installed after completion of the fi nal fl oor fi nish.

M at e rialsAnodized aluminium 6 0 6 3 /T 6 .PVC J oint Seals

S up p ly L e n g t h sAluminium Profile: 4 mJ oint Seals: 2 0 m rollsCustom lengths can be produced againtminimum order.


( O ther colors available subject to 5 0 0 m minimum order)B lack B e ig e G re y

FRA-SF

F R A -S F / C

F R A -S F

Medium Duty Surface Fix

X - T iteStrongSeal

X - T iteStrongSeal


CSK HeadedScrews /Fischer

Plugs

1 5

X-Joint

www.x-calibur.us


Heavy Duty • Sreed FixFLP-2BS

www.x-calibur.us1 6


FLP-2BS Screed Fix

T y p e A B C D E T o t al M o v e m e n t

F lat P ro fileFL P- 2 B S 3 0 3 0 4 0 6 1 3 8 - 2 0FL P- 2 B S 5 0 5 0 6 0 6 1 3 8 - 3 5FL P- 2 B S 7 5 7 5 8 5 6 1 3 8 - 5 0FL P- 2 B S 1 0 0 1 0 0 1 1 0 6 1 3 8 - 6 0FL P- 2 B S 1 2 5 1 2 5 1 3 5 6 1 3 8 - 8 0FL P- 2 B S 1 5 0 1 5 0 1 6 0 6 1 3 8 - 1 0 0C o rn e r P ro fileFL P- 2 B S/C 3 0 3 0 3 0 6 1 3 6 6 0 2 0FL P- 2 B S/C 5 0 5 0 5 0 6 1 3 6 6 0 3 5FL P- 2 B S/C 7 5 7 5 7 5 6 1 3 6 6 0 5 0FL P- 2 B S/C 1 0 0 1 0 0 1 0 0 6 1 3 6 6 0 6 0FL P- 2 B S/C 1 2 5 1 2 5 1 2 0 6 1 3 6 6 0 8 0FL P- 2 B S/C 1 5 0 1 5 0 1 5 0 6 1 3 6 6 0 1 0 0

D imensions in mm

D e scrip t io nStainless steel fiwith high end � oor fi nishes. Installed beneath the screed.

M at e rialsB ases: Anodized aluminium 6 0 6 3 /T 6

S up p ly L e n g t h sAluminium Profile: 4 m

J oint Seals: 2 0 m rollStainless Steel Profile: 2 .4 4 m

Custom lengths can be produced againtsminimum order.

C/SB2-PLF

X - T ite StrongSealEPS J oint Seal

Stainless Steel

X - T ite Strong B ond

Cover plates: Stainless Steel ( non slip) 3 0 4 or 3 1 6 .J oint Seals: PVC / EPD M

nish expansion joint for use

X - T ite StrongB ond


or X - R oc R esiCrete S

F L P -2 B S

EPS J oint Seal

Stainless Steel




1 6

X-Joint

www.x-calibur.us


Seismic • Surface FixCPS-F

www.x-calibur.us1 7

F S J -B S / C

CPS-F


Seismic Surface Fix

D e scrip t io nHigh movement ( seismic) expansion joint covers for use in car park s and areas subject to vehicular traffi c.

Installed after completion of the fi nal � oor fi nish.

M at e rialsAnodized aluminium 6 0 6 3 /T 6

Anodized aluminium 6 0 6 3 /T 6Stainless steel ( non slip) 3 0 4 or 3 1 6

S up p ly L e n g t h sB ase s: 4 m C o v e r P lat e s: Aluminium: 4 mStainless Steel: 2 .4 mCustom lengths can be produced against minimum order.

T y p e A B H P lat eT h ick n e ss M o v e m e n t

F lat P ro fileCPS- F 7 5 7 5 1 7 5 6 0 3 ± 3 7CPS- F 1 0 0 1 0 0 1 9 0 6 0 3 ± 5 0CPS- F 1 2 5 1 2 5 2 2 5 6 0 4 ± 6 2CPS- F 1 5 0 1 5 0 2 5 0 6 0 4 ± 7 5CPS- F 2 0 0 2 0 0 3 0 0 6 0 6 ± 1 0 0CPS- F 2 5 0 2 5 0 3 7 5 6 0 6 ± 1 2 5CPS- F 3 0 0 3 0 0 4 5 0 6 0 9 ± 1 5 0CPS- F 3 5 0 3 5 0 5 2 5 6 0 9 ± 1 7 5CPS- F 4 0 0 4 0 0 6 0 0 6 0 1 2 ± 2 0 0CPS- F 4 5 0 4 5 0 6 7 5 6 0 1 2 ± 2 2 5CPS- F 5 0 0 5 0 0 7 5 0 6 0 1 2 ± 2 2 5

C o rn e r P ro fileCPS- F/C 7 5 7 5 1 2 5 4 0 4 ± 1 8CPS- F/C 1 0 0 1 0 0 1 4 5 4 0 4 ± 2 5CPS- F/C 1 2 5 1 2 5 1 7 5 4 0 6 ± 3 1CPS- F/C 1 5 0 1 5 0 2 1 1 4 0 6 ± 3 7CPS- F/C 2 0 0 2 0 0 2 5 0 4 0 8 ± 5 0CPS- F/C 2 5 0 2 5 0 3 1 2 4 0 8 ± 6 2CPS- F/C 3 0 0 3 0 0 3 7 5 4 0 1 0 ± 7 5CPS- F/C 3 5 0 3 5 0 4 3 7 4 0 1 0 ± 8 7CPS- F/C 4 0 0 4 0 0 5 0 0 4 0 1 2 ± 1 0 0CPS- F/C 4 5 0 4 5 0 5 6 2 4 0 1 2 ± 1 1 5CPS- F/C 5 0 0 5 0 0 6 2 5 4 0 1 2 ± 1 2 5

D imensions in mm

F S J -B SX - PrufPolyliner PVC

X - PrufPolyliner PVC

X - T iteStrongSeal

X - T iteStrongSeal

C o v e r p lat e s:B ase s:

1 7

X-Joint

www.x-calibur.us


Seismic • Sreed FixCPS-R

www.x-calibur.us1 8

C P S -R C P S -R / C

CPS-R


Seismic Screed Fix

M at e rialsB ase s: Anodized aluminium 6 0 6 3 /T 6C o v e r p lat e s: Anodized aluminium 6 0 6 3 /T 6Stainless steel ( non slip) 3 0 4 or 3 1 6

S up p ly L e n g t h sB ase s: 4 mC o v e r p lat e s: Aluminium: 4 mStainless steel: 2 .4 mCustom lengths can be produced against minimum order.

T y p e A B C D * E * F * H

F lat P ro fileCPS- R 5 0 5 0 1 2 9 8 0 1 6 1 5 2 4 2 9 ± 3 7CPS- R 7 5 7 5 1 5 4 1 0 0 1 9 1 3 2 7 2 9 ± 5 0CPS- R 1 0 0 1 0 0 1 7 9 1 5 0 6 2 5 1 4 2 9 ± 6 2CPS- R 1 2 5 1 2 5 2 0 4 1 7 0 9 2 3 1 7 2 9 ± 7 5CPS- R 1 5 0 1 5 0 2 2 9 2 0 0 6 2 5 1 4 2 9 ± 1 0 0CPS- R 1 7 5 1 7 5 2 5 4 2 2 5 6 2 5 1 4 2 9 ± 1 2 5CPS- R 2 0 0 2 0 0 2 7 9 2 5 0 6 2 5 2 7 2 9 ± 1 5 0C o rn e r P ro fileCPS- R /C 5 0 5 0 9 0 6 5 1 7 1 5 2 5 2 ± 3 2CPS- R /C 7 5 7 5 1 1 5 8 8 1 9 1 1 2 7 2 9 ± 3 0CPS- R /C 1 0 0 1 0 0 1 4 0 1 2 5 7 2 5 1 5 2 9 ± 3 2CPS- R /C 1 2 5 1 2 5 1 6 5 1 4 8 9 2 3 1 7 2 9 ± 3 2CPS- R /C 1 5 0 1 5 0 1 9 0 1 7 5 7 2 5 1 5 2 9 ± 3 2CPS- R /C 1 7 5 1 7 5 2 1 5 2 0 0 7 2 5 1 5 2 9 ± 3 2CPS- R /C 2 0 0 2 0 0 2 4 0 2 2 5 7 2 5 1 5 2 ± 3 2

D imensions in mm

D e scrip t io nHigh movement ( seismic) expansion joint covers for use in car park s and areas subject to vehicular traffi c.


X - T iteStrongSeal

X - R oc R esiCrete S

X - R ocR esiCrete S

X - T iteStrongSeal



33 03 03 03 03 03 03 0

3344669

333333

P lat eT h ick n e ss M o v e m e n tH 1


1 8

X-Joint

www.x-calibur.us


Seismic • Surface FixFSJ-BS

www.x-calibur.us1 9

FSJ - BS


Seismic Screed Fix

T y p e A * B C D E T o t al M o v e m e n t

F lat P ro file

FSJ - B S 5 0 5 0 1 2 0 5 7 5 - 8 5

FSJ - B S 1 0 0 1 0 0 1 7 0 5 7 5 - 1 3 5

FSJ - B S 1 2 5 1 2 5 2 2 0 5 7 5 - 1 8 5

FSJ - B S 1 5 0 1 5 0 2 2 0 5 7 5 - 1 8 5


FSJ - B S/C 7 5 7 5 1 2 0 4 7 5 6 0 9 0

FSJ - B S/C 1 0 0 1 0 0 1 7 0 4 7 5 6 0 1 4 0

FSJ - B S/C 1 5 0 1 5 0 2 2 0 4 7 5 6 0 1 9 5D imensions in mm* M aximum D imension

F S J -B S / CF S J -B S

D e scrip t io nL arge movement seismic fl oor joint covers with a concealed fixing system that eliminates the use of screws.


M at e rialsAnodized aluminium 6 0 6 3 /T 6




PAN Headed Screws/Fischer Plugs PAN Headed Screws

/Fischer Plugs

1 9

X-Joint

www.x-calibur.us


Seismic • Sreed FixFFJ-BS

www.x-calibur.us2 0

FFJ-BS


M at e rialsB ases: Anodized aluminium 6 0 6 3 /T 6PVC J oint Seals.

S up p ly L e n g t hAluminium Profile: 4 mJ oint Seals: 2 0 m rollsCustom lengths can be produced against minimum order.



F F J -B S

tnemevoM latoTCBAepyT

F lat P ro file

520 /4 730 2 0

2 0

2 03 0

5 0

7 5

7 5

202 SB-JFF

04130303 SB-JFF

06330505 SB-JFF

3

07535757 SB-JFF

1 2 03 51 5 01 5 0SB-JFF

0933001001 SB-JFF

1 6 633002002 SB-JFFD imensions in mm

X - Pruf Polyliner PVC

X - T ite StrongSeal( B oth Sides)

X - T ech Epoxy Floor SL U

X - J oint FR A- B S

B

C

X - J oint FR A- B S

D e scrip t io nL arge movement seismic expansion joint for use with thin fl oor fi nishes, such as tile, vinyl or carpet, with minimum effect of the appearance of the fl oor.

Installed beneath the fl oor screed.

Seismic Screed Fix



7 5

2 0

X-Joint

www.x-calibur.us

Tile & Screed

Screed FixCJ1

www.x-calibur.us2 1

C J 1

CJ1

X-Joint Tile & Screed

T y p e A B C D T o t al M o v e m e n t

CJ 1 1 4 /5 5 9 1 4 2 ± 2

CJ 1 1 4 /8 8 1 2 1 4 2 ± 2

CJ 1 2 0 /5 5 9 2 0 2 ± 2

CJ 1 2 0 /8 8 1 2 2 0 2 ± 2

CJ 1 3 0 /8 8 1 2 3 0 2 ± 2

CJ 1 4 0 /8 8 1 2 4 0 2 ± 2

CJ 1 5 0 /8 8 1 2 5 0 2 ± 2

CJ 1 5 0 /1 0 1 0 1 4 5 0 2 ± 2

CJ 1 7 5 /8 8 1 2 7 5 2 ± 2

CJ 1 8 0 /1 0 1 0 1 4 8 0 2 ± 2D imensions in mm

D e scrip t io nAnodized aluminum neoprene construction joint for use with tiles and stone.

Installed when floor finish is being laid.

M at e rialsB ases: Anodized aluminium 6 0 6 3 /T 6 ( Stainless Steel or B rass available upon req uest) .

Santoprene or N eoprene joint strip. ( EPD M )

J o in t S t rip C o lo ur

Custom size can be produced upon req uest

Surface Fix



Santoprene/N eoprenejoint strip

2 1

X-Joint

www.x-calibur.us

Tile & Screed

Screed FixCJ2

www.x-calibur.us2 2

D e scrip t io nAnodized aluminum construction joint for use with tiles and stone.

Installed beneath the screed

M at e rialsB ases: Anodized aluminium 6 0 6 3 /T 6 Santoprene & N eoprene joint strip ( EPD M )

J o in t S t rip C o lo ur


CJ2


T y p e A B C D E T o t al M o v e m e n t

CJ 2 1 4 /5 5 9 1 4 2 5 2 - 4 + 2

CJ 2 1 4 /8 8 1 2 1 4 2 5 2 - 4 + 2

CJ 2 2 5 /8 8 1 2 2 5 2 5 2 - 4 + 2

CJ 2 3 2 /8 8 1 2 3 2 5 0 2 - 4 + 2

CJ 2 4 2 /8 8 1 2 4 2 5 0 2 - 4 + 2

CJ 2 5 0 /8 8 1 2 5 0 5 0 2 - 4 + 2

CJ 2 7 5 /8 8 1 2 7 5 5 0 2 - 4 + 2D imensions in mm

CJ2


Custom sizes can be produced upon req uest

Santoprene/N eoprenejoint strip

Screed Fix

C J 2

2 2

X-Joint

www.x-calibur.us

Tile & Screed

Screed FixCJ3

www.x-calibur.us23


Type A B C D E Total Movement

CJ3 40/10 10 13 40 30 1.5 ±2

CJ3 50/10 10 13 50 30 1.5 ±2

CJ3 60/10 10 13 60 30 1.5 ±2

CJ3 80/10 10 13 80 40 1.5 ±2

CJ3 100/10 10 13 100 40 1.5 ±2Dimensions in mm

DescriptionStainless steel neoprene construction joint for use with tiles and stone.


Materials• Stainless steel strip 304 or 316 (Anodized aluminium 6063/T6 and brass available upon request).• Santoprene or Neoprene joint strip• X-Seal JointBoard P60 (Refer to Product Datasheet)• Nelson Stud Grade 304 Size: M6x30mm

Joint Strip Colour

(Other colors available subject to 500m minimum order)

CJ3

Black Beige Grey

CJ3

Custom sizes can be produced upon request

Screed Fix

CJ3

Santoprene/Neoprene

Nelson Stud Grade 304(Size: M6x30mm)

joint strip

X-Seal Joint Board P60

2 3

X-Joint

www.x-calibur.us

Tile & Screed

Screed FixCJ4

www.x-calibur.us24

Type A B C D Total Movement

CJ4 20/6 6 10 20 2 ±2

CJ4 30/6 6 10 30 2 ±2

CJ4 40/6 6 10 40 2 ±2

CJ4 50/6 6 10 50 2 ±2

CJ4 7 5/6 6 10 7 5 2 ±2

CJ4 80/6 6 10 80 2 ±2Dimensions in mmCustom sizes can be produced upon request


CJ4

DescriptionAnodized aluminum poly urethane/poly ethy lene construction joint for use with tiles and stone. Accepts higher movement than neoprene.


Materials• Anodized aluminium 6063/T6 (Stainless steel and brass available upon request).• One component poly urethane sealant • F oam PV C or E PDM (sub-lay er)

Supply L ength s3m, custom size can be produced upon request

Poly urethane sealant

F oam PV C or E PDM

Surface Fix

2 4

X-Joint

www.x-calibur.us

Tile & Screed

Screed FixAJS

www.x-calibur.us25

AJS


DescriptionE xtruded anodized aluminium joint separators for screed and fl oor fi nishes.

MaterialsAnodized aluminium 6063/T6

Supply L ength s3m or 6m, can be cut to exact installation length prior to delivery .

05 SJA 52 SJA

Screed Fix

1.8

2

2.5 3

2 5

X-Joint

www.x-calibur.us


Surface FixSWJ1

www.x-calibur.us2 6

X-Joint Wall & Ceiling Profiles

SWJ1

D ECBepyT

F lat P ro file

04/011 1JWS

A

07/021 1JWS

SW J 1 1 4 5 /1 0 0

SW J 1 1 8 5 /1 4 0


07 C/1JWS

021 C/1JWS

541 C/1JWS

581 C/1JWS

* Can be used in horizontal applications subject to pedestrian loads.

D e scrip t io nExtruded aluminum joint covers used to cover exterior and interior joints on fi nished walls and ceilings.

M at e rialsAnodized aluminium 6 0 6 3 /T 6 Can also be supplied in mill fi nish and powdercoated aluminum.


S W J 1 S W J 1 / C

Surface Fix

SW J 1 2 6 0 /1 8 0

SW J 1 3 2 5 /2 0 0

CSK Headed Screws / Fischer Plugs

CSK Headed Screws / Fischer Plugs

2 0 - 4 0

4 5 - 6 0

6 5 - 8 0

8 5 - 1 0 0

1 0 0 - 1 5 0

1 5 5 - 2 0 0

1 1 0

1 1 7

1 4 5

1 8 5

2 6 0

3 2 5

3 .5

3 .5

5 .0

6 .0

6 .0

6 .0

3 .5

3 .5

5 .0

6 .0

6 .0

6 .0

1 .7

1 .7

1 .7

2 .5

3 .5

3 .8

5 0

1 0 0

1 2 0

1 5 0

6 7

1 1 7

1 3 7

1 6 7

3 .5

3 .8

6 .0

5 .0

5 0

5 0

5 0

5 0

1 .5

2 .0

3 .5

3 .0

2 6

X-Joint

www.x-calibur.us


Concealed FixingCWJ1

www.x-calibur.us2 7

Wall & Ceiling ProfilesX-Joint

CWJ1 Concealed Fixing

T y p e A B C D H H 1 M o v e m e n t

F lat P ro file

CW J 1 5 0 5 0 1 1 7 3 5 2 2 - 8 4 ( + 4 3 - 4 1 )

CW J 1 7 5 7 5 1 1 7 3 5 2 2 - 8 4 ( + 1 8 - 6 6 )

CW J 1 1 0 0 1 0 0 1 6 7 3 5 2 2 - 1 3 4 ( + 4 3 - 9 1 )

CW J 1 1 2 5 1 2 5 2 1 9 3 5 2 2 - 1 8 6 ( + 7 0 - 1 1 6 )

CW J 1 1 5 0 1 5 0 2 1 9 3 5 2 2 - 1 8 6 ( + 4 5 - 1 4 1 )

C o rn e r P ro fileCW J 1 /C 5 0 5 0 9 5 4 5 5 0 9 5 ( - 5 0 + 4 5 )

CW J 1 /C 7 5 7 5 9 5 4 5 5 0 9 5 ( - 7 5 + 2 0 )

CW J 1 /C 1 0 0 1 0 0 1 6 0 4 5 5 0 1 6 0 ( - 1 0 0 + 6 0 )

CW J 1 /C 1 2 5 1 2 5 2 0 5 4 5 5 0 2 0 5 ( - 1 2 5 + 8 0 )

CW J 1 /C 1 5 0 1 5 0 2 0 5 4 5 5 0 2 0 5 ( - 1 5 0 + 5 5 )D imensions in mm

D e scrip t io nExtruded aluminium joint covers used to cover exterior and interior joints on finished walls and ceilings, with no visible fi xings.

M at e rialsAnodized aluminium 6 0 6 3 /T 6Also available in mill finish / powder coated.

S up p ly L e n g t h s3 m, other widths ( B ) available with pre- formedaluminium plates.

C W J 1 / C C W J 1with wall/ceiling support

W all

Ceiling

support

wall corner/ceiling corner support

W all

1 0 .5

1 0 .5

1 0 .5

1 0 .5

1 0 .5

1 0 .5

1 0 .5

1 0 .5

1 0 .5

1 0 .5

2 7

X-Joint

www.x-calibur.us


Surface FixSWJ2

www.x-calibur.us28

Type A B C D E Total Movement*

F lat P rofile

SW J2 25 25 9 5 35 11 - 55

SW J2 50 50 120 35 11 - 100

SW J2 7 5 7 5 145 35 11 - 150

SW J2 100 100 17 0 35 11 - 200

SW J2 125 125 19 5 35 11 - 250

SW J2 150 150 220 35 11 - 300

Corner P rofile

SW J2/C 25 25 60 35 11 35 55

SW J2/C 50 50 85 35 11 35 100

SW J2/C 7 5 7 5 110 35 11 35 150

SW J2/C 100 100 135 35 11 35 200

SW J2/C 125 125 160 35 11 35 250

SW J2/C 150 150 185 35 11 35 300Dimensions in mm

DescriptionH igh movement capacity anodized aluminum/PV C weather seal expansion joint for use in walls and ceilings in internal and external applications.

MaterialsBase: Anodized aluminium 6063/T6Special PV C joint seals resistant to sunlight

Supply L ength sAluminium Profile: 3m PV C Joint Seals: 50mCustom lengths can be produced to order.

P V C Joint Seals Colour


X-Joint

SWJ2

Black Beige Grey

* Movements do not tak e into consideration PV C elongation at break (ISO R 527 )

SW J2

SW J2 / C


X-TiteStrongSeal

X-TiteStrongSeal

Surface Fix

2 8

X-Joint

www.x-calibur.us


Concealed FixingCWJ2

www.x-calibur.us29

Corner P rofile

CW J2/C 25 25 30 30 18 41 50

CW J2/C 50 50 47 30 18 41 60

CW J2/C 7 5 7 5 66 30 18 41 9 5

CW J2/C 100 100 9 1 30 18 41 152

CW J2/C 125 125 116 30 18 41 185

CW J2/C 150 150 145 30 18 41 17 0Dimensions in mm

X-Joint

CWJ2



F lat P rofile

CW J2 25 25 43 30 18 - 50

CW J2 50 50 64 30 18 - 60

CW J2 7 5 7 5 9 0 30 18 - 9 5

CW J2 100 100 114 30 18 - 152

CW J2 125 125 140 30 18 - 185

CW J2 150 150 165 30 18 - 17 0

CW J2 / C

Concealed Fixing

DescriptionAnodised aluminum expansion joint with integrated weather seal for use in wall and ceilings.

Installed beneath the plaster or wall board to provide a fl ush fi nish with no visible fi xings.

MaterialsAnodized aluminium 6063/T6 in neutral color.Special PV C joint seals, resistant to sunlight.

Supply L ength sAluminium Profi le: 3mPV C Joint Seals: 50mCustom lengths can be produced to order.


CW J2

X-TiteStrongSeal

X-TiteStrongSeal PAN H eaded Screws

/F ischer Plugs

2 9

X-Joint

www.x-calibur.us


Surface FixSWJ3

www.x-calibur.us30

X-Joint

SWJ3

DescriptionAnodised aluminum expansion joint with integrated weather seal for use in wall and ceilings. F ixed directly on to the fi nished wall surface.

MaterialsAnodized aluminium 6063/T6PV C Joint Seals

Supply L ength sAluminium Profi le: 3mPV C Joint Seals: 50mCustom lengths can be produced to order.


F lat P rofile

SW J3 25 25 9 5 35 11 - 50

SW J3 50 50 120 35 11 - 60

SW J3 7 5 7 5 145 35 11 - 9 5

SW J3 100 100 17 0 35 11 - 152

SW J3 125 125 19 5 35 11 - 185

SW J3 150 150 220 35 11 - 17 0

Corner P rofile

SW J3/C 25 25 60 35 11 35 50

SW J3/C 50 50 85 35 11 35 60

SW J3/C 7 5 7 5 110 35 11 35 9 5

SW J3/C 100 100 135 35 11 35 152

SW J3/C 125 125 160 35 11 35 185

SW J3/C 150 150 185 35 11 35 17 0Dimensions in mm* Movements do not tak e into consideration PV C elongation at break (ISO R 527 )

Surface Fix


SW J3

X-TiteStrongSeal

SW J3/ C

X-TiteStrongSeal

CSK H eaded Screws/F ischer Plugs


3 0

X-Joint

www.x-calibur.us


Dry Walls, Installation Under PlasterCWJ3

www.x-calibur.us31

X-Joint

CWJ3

Black Beige Grey


F lat P rofileCW J3 20 20 25 37 9 9 10 15CW J3 30 30 35 37 110 13 20CW J3 50 50 56 35 126 13 30CW J3 7 5 7 5 84 35 154 13 36CW J3 100 100 111 32 17 5 13 34CW J3 125 125 140 35 210 13 64CW J3 150 150 165 35 235 13 9 0

Corner P rofileCW J3/C 20 20 22 37 59 10 15CW J3/C 30 30 32 37 68 13 20CW J3/C 50 50 53 35 88 13 30CW J3/C 7 5 7 5 7 8 35 113 13 36CW J3/C 100 100 105 32 136 13 34CW J3/C 125 125 130 35 165 13 64CW J3/C 150 150 155 35 19 0 13 9 0

Dimensions in mm* Movements do not tak e into consideration PV C elongation at break (ISO R 527 )

DescriptionE xtruded aluminum/PV C expansion joints for use on internal applications for walls and ceilings with gy psum board or before plastering.


Supply L ength sAluminium Profi le: 4mJoint Seals 25mCustom lengths can be produced to order.

P V C Joint Seals Colour


CW J3

CW J3/ C

Dry Walls, Installation Under Plaster


X-TiteStrongSeal

X-TiteStrongSeal

PAN H eaded Screws/F ischer Plugs

3 1

X-Joint

www.x-calibur.us


Surface FixSWJ4

www.x-calibur.us32

X-Joint

SWJ4

Black Beige Grey

Type A B C D E F Total Movement*

F lat P rofile

SW J4 20 20 15 38 9 1 16 - 12

SW J4 30 30 26 43 112 16 - 20

SW J4 50 50 46 55 156 17 - 30

SW J4 7 5 7 5 69 58 185 30 - 36

SW J4 100 100 9 6 65 226 33 - 34

SW J4 125 125 115 7 5 265 33 - 64

SW J4 150 150 140 7 5 29 0 33 - 9 0

Corner P rofile

SW J4/C 20 20 18 38 56 16 37 12

SW J4/C 30 30 26 43 69 16 63 20

SW J4/C 50 50 46 55 101 17 69 30SW J4/C 7 5 7 5 65 58 123 30 68 36

SW J4/C 100 100 9 6 65 161 33 87 34

SW J4/C 125 125 116 55 17 1 17 69 64

SW J4/C 150 150 141 55 19 6 17 69 9 0

Dimensions in mm

DescriptionAnodised aluminum expansion joint with visible weatherseal for interior joints on walls and ceilings. F ixed directly onto the fi nished wall/ceiling surface.


Supply L ength sAluminium Profi le: 4mJoint Seals: 25mCustom lengths can be produced to order.

P V C Joint Seal Colour



Finished Surfaces


SW J4 / C

SW J4

3 2

X-Joint

www.x-calibur.us

Roof Profiles

Screed FixRJ1

www.x-calibur.us33

X-Joint

RJ1

DescriptionF ully waterproof joint sy stem for roof joints 10mm to 100mm wide used to cover and sealjoints in accesible roofs.

MaterialsCover plate: Anodized aluminium grade 6063/T6(Stainless steel AISI 304 or 316 arealso available upon request).Joint Seals: U V Resistant PV C

Supply L ength sAluminium: 4mJoint Seals: 20m rollCustom lengths can be produced to order.

Type A B C D Total Movement*

F lat P rofileRJ1 10/15 10-15 117 5 33/45/7 5 20RJ1 15/20 15-20 117 5 33/45/7 5 30RJ1 20/30 20-30 117 5 33/45/7 5 40RJ1 30/40 30-40 117 5 33/45/7 5 50RJ1 40/50 40-50 17 0 5 33/45/7 5 65RJ1 50/80 50-80 17 0 5 33/45/7 5 100RJ1 80/100 80-100 17 0 5 33/45/7 5 120Corner P rofileRJ1/C 10/15 10-15 67 4 33/45/7 5 20RJ1/C 15/20 15-20 67 4 33/45/7 5 30RJ1/C 20/30 20-30 67 4 33/45/7 5 40RJ1/C 30/40 30-40 67 4 33/45/7 5 50RJ1/C 40/50 40-50 67 4 33/45/7 5 65RJ1/C 50/80 50-80 120 4 33/45/7 5 100RJ1/C 80/100 80-100 120 4 33/45/7 5 120

Dimensions in mm* Movements depend on the cover plate width

For roof joints 10mm to 100mm wide

Roof Profiles

R J1

X-TiteStrongSeal

X-PrufPoly liner PV C

E PS Joint Seal

Counter Sunk Anchor / Screws

PAN H eaded Screws/ F ischer Plugs

PAN H eaded Screws/ F ischer Plugs

CSK H eaded Screws/ F ischer Plugs

R J1 / C

X-PrufPoly liner PV C

X-TiteStrongSeal

E PS Joint Seal

3 3

X-Joint

www.x-calibur.us

Roof Profile

Screed FixRJ2

www.x-calibur.us34

DescriptionH igh movement (seismic) anodised aluminium/PV C wall joint for use with a wall fi nish up to

Joint support: W hite aluminium (Powder coated RAL 9 006)Joint Seals: U V Resistant PV C

Supply L ength sAluminium Profi le: 4mJoint Seal: 25m rollCustom lengths can be produced to order.


F lat P rofile

RJ2 50 50 117 4 45 - 7 0

RJ2 100 100 17 0 4 45 - 125

RJ2 150 150 219 4 45 - 180

RJ2 200 200 250 4 45 - 230

X-Joint Roof Profiles

RJ2

Corner P rofile

RJ2/C 50 50 7 0 4 45 50 60

RJ2/C 100 100 120 4 45 50 120

RJ2/C 150 150 169 4 45 50 200

RJ2/C 200 200 17 0 4 45 50 320Dimensions in mm* Movements depend on the cover plate width

For roof joints 50mm to 200mm wide

R J2 / C

X-PrufPoly L iner PV C

X-TiteStrongSeal

E PS H M E PS H M

R J2

X-PrufPoly L iner PV C

X-TiteStrongSeal



Cover plate: Anodized aluminium 6063/T6Materials

16mm thick . Joint must be fixed onto a concrete or masonary substrate.

CSK H eaded Screws/ F ischer Plugs

3 4

X-Joint

www.x-calibur.us

Roof Profile

Surface FixRJ3

www.x-calibur.us35

X-Joint Roof Profiles

RJ3 Fully waterproof joint systems for roof joints

DescriptionH igh movement (seismic) anodised aluminium/PV C wall joint for use with a wall fi nish up tpo 16mm thick . Joint must fi xed on to a concrete or masonary substrate.

MaterialsJoint plate: 2mm thick preformed galvanized sheetF ixing strip: Mill fi nish aluminiumW aterproofi ng membrane: X-Pruf Poly liner PV C

Supply L ength sJoint plate: 2.44mF ixing strip: 3mMembrane: 25mCustom lengths can be produced to order.

Type A TotalMovement

F lat P rofile

RJ3 50 50 50

RJ3 100 100 100

RJ3 150 150 150

RJ3 200 200 200

Corner P rofile

RJ3/C 50 50 50

RJ3/C 100 100 100

RJ3/C 150 150 150

RJ3/C 200 200 200Dimensions in mm

R J3

X-Joint PP 58

Countersunk screwwith plastic plug

2mm thickpreformed G.I. sheet

X-Pruf Poly L iner PV C

X-Tite StrongSeal

R J3/ C

X-Joint PP 58


2mm thick preformed G.I. sheet

X-Pruf Poly L iner PV C

X-Pruf Poly L iner PV Cbonded withX-Tite StrongSeal

X-TiteStrongSeal

3 5

X-Joint

www.x-calibur.us

ClipStrips

ClipStrips

www.x-calibur.us36

DescriptionRange of extruded aluminum joint covers that are suitable for use in a wide range of internal and external applications in commercial, institutional and industrial buildings. W hile aesthetically pleasing they are particularly useful for protection of elastomeric joint sealants and fi re barriers.

MaterialsAnodized aluminium 6063/T6 or mill fi nish aluminum.

Polished fi nish and powder coated profi les can be provided in a wide range of colors.

Supply L ength s3m or 6m lengthsCustom lengths can be produced to order.

X-Joint Clip Strips

ClipStrips

Floor Profiles

Wall Profiles

Corner Profile

Spring Clips

P rof ile Type P rof ile W id th Joint W id th

F loor P rofilesF 45C 45 15 to 20F 55C 55 20 to 35F 55F 55 20 to 35F 7 0F 7 0 30 to 45

W all P rofilesW 55G 55 20 to 35W 7 0C 7 0 15 to 50

Spring ClipsSS40 40 20 to 30SS60 60 30 to 50

Dimensions in mm

Corner P rofilesC50 53 15 to 50

F 4 5 C and F 5 5 C

W 7 0 C

C5 0

SS4 0 and SS6 0

W 5 5 G

F 5 5 F and F 7 0 F

X-Seal PS800 orX-Tite StrongSeal

SpringClips

X-SealJointBoard

SpringClips

ClipStripsClipStrips

Surface Fix

3 6

X-Joint

www.x-calibur.us

Joint Seals

Seismic • Surface FixEPS

www.x-calibur.us3 7

X-Joint Joint Seals

EPS Surface �x

D e scrip t io nSeismic waterproofing expansion joint sealsfor use in mechanical expansion joints

M at e rialsSpecial PVC resistant to sunlight

J o in t S e al C o lo ur

( O ther colours available subject to 5 0 0 m minimum order)

tnemevoM latoTCBAepyT02020251-0102/02 SPE

03030302-5103/03 SPE

04530403-0253/04 SPE

05040504-0304/05 SPE

56055605-0405/56 SPE

0018400108-0584/001 SPE

02106521001-0806/521 SPED imensions in mm


X - T ite StrongSealX - T ite StrongSeal X - T ite StrongSeal X - T ite StrongSeal

3 7

X-Joint

www.x-calibur.us

Joint Seals

Seismic • Surface FixEPS-HM

www.x-calibur.us38

X-Joint Joint Seals

EPS HM Heavy Duty Surface Fix

DescriptionH igh movement (seismic) waterproofing expansionjoints for use in vertical and horizontal applicationssuch as walls and slabs

MaterialsP rofi : Anodized aluminiun 6063/T6 natural finish Joint Seals: U V resistant PV C or Santoprene

Supply L ength sAluminium Profile: 3 or 4mJoint Seals: 25m rollCustom lengths can be produced to order.

Colour


Type A B C TotalMovement

E PS H M 50 50 58 25 50

E PS H M 100 100 58 25 100

E PS H M 150 150 58 25 150

E PS H M 200 200 58 25 200Dimensions in mm

Black Beige Grey

EP S H M 5 0

EP S H M 1 0 0

EP S H M 1 5 0

EP S H M 2 0 0

X-Tite StrongSealX-Tite StrongSeal

X-TiteStrongSeal

3 8

X-Joint

www.x-calibur.us

Joint Seals

Seismic • Surface FixEPS-HD

www.x-calibur.us3 9

X-Joint Joint Seals

EPS-HD Seismic Surface Fix

D e scrip t io nPre- formed heavy duty joint seal for use in mechanical expansion joints

M at e rialsProfi le: Anodized aluminiun 6 0 6 3 /T 6 natural fi nishJ oint insert: U V resistant PVC or Santoprene

S up p ly L e n g t h sAluminium Profi le: 3 or 4 mJ oint Seals: 2 5 mCustom lengths can be produced to order.

C o lo ur

B lack G re y

T y p e A BJ o in tW id t h s

T o t alM o v e m e n t ( + / -)

D imensions in mm

EPS-HD 25EPS-HD 50EPS-HD 75EPS-HD 100EPS-HD 125EPS-HD 150EPS-HD 200

10-2530-5055-75

80-100105-125130-150155-200

305582

110137165225

20404550556060

152535506075

100

3 9

X-Joint

www.x-calibur.us

Stair Nosings

Surface FixSN

www.x-calibur.us40

X-Joint Stair Nosings

SN

Type A B

SN 45 AA/1 45 23

SN 45 AA/2 45 13

SN 45 RS 45 13

SN 45 CarboTM 1 45 13

SN 45 CarboTM 2 45 23Dimensions in mm

SN 4 5 AA1

SN 4 5 R S

SN 4 5 CarboTM 1

SN 4 5 CarboTM 2

A

B

A

B

A

B

A

B

B

SN 4 5 AA2

DescriptionAnodized aluminium stair nosings.

MaterialsAnodized aluminium 6063/T6Insert SN45 RS E PDM onlyInsert SN45 CarboTM only : CarboTM anti-slip grains embedded in epoxy resin.

Supply L ength s3m or 6m lengthsCan be cut to exact installation length prior to delivery .

A

Surface Fix

4 0

X-Joint

www.x-calibur.us

Floor Skirting

Surface FixSkirting

www.x-calibur.us4 1

X-Joint Floor Skirting

Skirting

T y p e A B

Sk irting 1 0 0 1 0 0 1 .7Sk irting 1 5 0 1 5 0 2 .5

A

B

D e scrip t io nAnodized aluminium floor sk irtingInstalled after the completion of floor finish

M at e rialsAnodized aluminium grade 6 0 6 3 /T 6Can be in mill finish/powder coated

S up p ly L e n g t h sStandard length is 3 m. Custom lengths can beproduced against our minimum order level.

Surface FixW

all

D imensions in mm

Floor

www.x-calibur.us2

Selected Projects

Singapore

New Doha

International Airport

Doha Qatar

Vietnam

Abu Dhabi

SAVICO

Ho Chi Minh

Oasis Hospital Development

Al Ain

Abu Dhabi

Eastern Mangrove

Hotel Apartments

www.x-calibur.us

Oman National

Museum

Majilis, Oman

Singapore Expo Convention

& Exhibition Centre

4 1 www.x-calibur.uswww.x-calibur.us2

Selected Projects

Singapore

New Doha

International Airport

Doha Qatar

Vietnam

Abu Dhabi

SAVICO

Ho Chi Minh

Oasis Hospital Development

Al Ain

Abu Dhabi

Eastern Mangrove

Hotel Apartments

www.x-calibur.us

Oman National

Museum

Majilis, Oman

Singapore Expo Convention

& Exhibition Centre


Selected Projects

Yas Island,

Marina Hotel

and F1 Circuit

Abu Dhabi

Emirates

Financial Towers

Dubai

Dubai

Dubai

Hamdan Bin Mohammed Bin

Rashid Sports Complex

American School

Dubai

SkyCourts

www.x-calibur.us

Iranian Hospital

Dubai


Selected Projects

Sharjah

Al Ain Stadiumand

Mixed Use Development

Al Ain

Dubai

Abu Dhabi

Silicon Oasis

Al Fahidi Market

Bur Dubai

City of Lights

Al Reem Island

Development

www.x-calibur.us

Al Waha Tower

Sharjah

Al Jubail Market

Government of Sharjah

X -C alibur W o rld wid e

X -C alibur C o n st ruct io n S y st e m s I n c. ( U S A )Phone: ( 9 5 4 ) 7 4 5 6 1 6 0Email: usa@ x- calibur.us

Q E D X -C alibur L im it e dPhone: ( 0 1 1 7 ) 9 7 5 8 6 0 4Email: uk @ x- calibur.co

X -C alibur I n t e rn at io n al F Z C( Asia, Arabia and Africa Headq uarters Export & Franchise Enq uiries)Phone: ( + 9 7 1 ) 6 5 7 4 8 2 2 8Email: export@ x- calibur.us

X -C alibur E m irat e sPhone: ( + 9 7 1 ) 0 6 5 3 5 2 0 2 3Email: uae@ x- calibur.us

X -C alibur Q at ar - M J K G ro up ( M anufacturing L icensee)Phone: ( + 9 7 4 ) 4 4 8 8 8 0 3 5Email: q atar@ x- calibur.co

T h o ro n X -C alibur L t d ( J o in t V e n t ure )( M ember of the T horon G roup)Phone: 0 2 8 3 8 9 3 9 3Email: hk @ x- calibur.co

X -C alibur C o n st ruct io n S y st e m s I n c. ( U S A )Phone: ( 9 5 4 ) 7 4 5 6 1 6 0Email: usa@ x- calibur.us

Q E D X -C alibur L im it e dPhone: ( 0 1 1 7 ) 9 7 5 8 6 0 4Email: uk @ x- calibur.co

X -C alibur I n t e rn at io n al F Z C( Asia, Arabia and Africa Headq uarters Export & Franchise Enq uiries)Phone: ( + 9 7 1 ) 6 5 7 4 8 2 2 8Email: export@ x- calibur.us

X -C alibur E m irat e sPhone: ( + 9 7 1 ) 0 6 5 3 5 2 0 2 3Email: uae@ x- calibur.us

X -C alibur Q at ar - M J K G ro up ( M anufacturing L icensee)Phone: ( + 9 7 4 ) 4 4 8 8 8 0 3 5Email: q atar@ x- calibur.co

T h o ro n X -C alibur L t d ( J o in t V e n t ure )( M ember of the T horon G roup)Phone: 0 2 8 3 8 9 3 9 3Email: hk @ x- calibur.co

X -C alibur I n t e rn at io n al V ie t n am Re resentati e ffi ePhone: ( 0 9 0 ) 3 9 7 7 9 7 1Email: vnsaigon@ x- calibur.co

X -C alibur C o n st ruct io n C h e m ist ry ( E A ) L im it e dPhone: ( + 2 5 4 ) 7 3 9 9 1 1 3 3 3Email: sales@ x- calibur.co.k e

T A L X -C alibur ( M an uf act urin g L ice n se e )T AL - A D ivision of N orcros SA ( Pty) L tdPhone: ( 0 1 1 ) 2 0 6 9 7 0 0Email: taltech@ norcrossa.comW ebsite: www.x- calibur.co.za

N C C X -C alibur ( M an uf act urin g L ice n se e )Phone: ( + 2 0 1 ) 2 0 4 4 5 5 9 9 5Email: info@ ncc.com.egW ebsite: www.ncc.com.eg

L e C h im iq ue d e T un ise ( M an uf act urin g L ice n se e )Phone: 7 1 3 8 1 4 5 0 / 7 1 3 8 2 9 2 9Email: chimic@ chimic.com.tn

X -C alibur I n t e rn at io n al V ie t n am Re resentati e ffi ePhone: ( 0 9 0 ) 3 9 7 7 9 7 1Email: vnsaigon@ x- calibur.co

X -C alibur C o n st ruct io n C h e m ist ry ( E A ) L im it e dPhone: ( + 2 5 4 ) 7 3 9 9 1 1 3 3 3Email: sales@ x- calibur.co.k e

T A L X -C alibur ( M an uf act urin g L ice n se e )T AL - A D ivision of N orcros SA ( Pty) L tdPhone: ( 0 1 1 ) 2 0 6 9 7 0 0Email: taltech@ norcrossa.comW ebsite: www.x- calibur.co.za

N C C X -C alibur ( M an uf act urin g L ice n se e )Phone: ( + 2 0 1 ) 2 0 4 4 5 5 9 9 5Email: info@ ncc.com.egW ebsite: www.ncc.com.eg

L e C h im iq ue d e T un ise ( M an uf act urin g L ice n se e )Phone: 7 1 3 8 1 4 5 0 / 7 1 3 8 2 9 2 9Email: chimic@ chimic.com.tn

www.x-calibur.us

x-joint building expansion joint systems · expansion joint for use in walls and ceilings in...

Documents