wzl motor handbook 4th ed v1 0a 3
DESCRIPTION
HandbookTRANSCRIPT
-
M
OTO
R H
AN
DBO
OK
-
4th ED V1.0a
4th Edition Ver. 1.0aIssue Date; December 23, 2013
Wenzel Downhole Tools
ALL RIGHTS RESERVED
The information contained in this manual is provided for informational and illustration purposes only. Wenzel Downhole Tools has made every effort to ensure the accuracy of the information contained within, however, Wenzel does not warrant nor guarantee the contents. The use and interpretation of the information contained in this manual is entirely at the risk of the user. The contents of this handbook are subject to change without notice.
CORPORATE OFFICE /CALGARY SALES1000 Elveden House717 - 7 Avenue SWCalgary, AlbertaCanada T2P 0Z3Phone: (403) 262-3050Fax: (403) [email protected]
MANUFACTURING /SALES FACILITIES3115 - 93 StreetEdmonton, AlbertaCanada T6N 1L7Phone: (780) 440-4220Fax: (780) 469-8054Toll Free: [email protected]
US HEADQUARTERS4205 FM 1485Conroe, TexasU.S.A. 77306Phone: (936) 441-1480Fax: (936) [email protected]
WYOMING5081 Yellowstone Hwy.Casper, WyomingU.S.A. 82604Phone: (307) 266-1580Fax: (307) 266-1656Toll Free: [email protected]
www.downhole.com
Motor Handbook
OKLAHOMA100 South Cooley DriveOklahoma City, OklahomaU.S.A. 73127Phone: (405) 787-4145Fax: (405) 470-1968
WEST VIRGINIA400 Caterpillar RoadMorgantown, West VirginiaU.S.A. 26508Phone: (304) 777-2534Fax: (304) 777-2539
EUROPEGrafftring 529227 Celle, GermanyPhone: 49 (0) 5141 977 65 0Fax: 49 (0) 5141 977 65 29
WEST TEXAS1506 South Country Road 1309Midland, TexasU.S.A. 79707Phone: (432) 848-3977
-
4th ED V1.0a
Table of Contents
Introduction
Overview
Tool Description
Motor Servicing
Motor Specifi cations
Build Rate Predictions
Adjustable Bent Housing
Motor Confi gurations
Mud Lube Motor
High Build Motor
Shocks Tools and Jars
DCR Sub
Optional Equipment
Tables and Formulas
Notes
-
4th ED V1.0a
IntroductionIntroduction
-
4th ED V1.0a
Introduction
IntroductionSince their introduction in 1981, Wenzel Downhole
Motors have established a reputation for performance, reliability and excellent service. Our motors provide superior performance and longer operating life, in todays extremely demanding drilling conditions.
We provide a versatile range of sizes and types of motors for performance, directional, horizontal, coiled tubing, work over, and utility applications. Wenzel Motors incorporate numerous exclusive technology improvements in its bearing assemblies, adjustable bent housings, and drive line designs.
Overview
Wenzel positive displacement motors provide superior performance and longer operating life for todays drilling programs. Wenzel offers a versatile array of Downhole motors available for straight, directional, horizontal, workover, coil tubing, and utility applications. Wenzel motors utilize the industrys best technology in sealed bearing assemblies, adjustable bent housings, and drive lines. Wenzel motors will operate effectively with most drilling fl uids in a wide range of fl uid weights and viscosities including air, mist and foam. Some constraints can be imposed by the use of drilling fl uids based on synthetics or low aniline mineral oils and when certain additives are being used. This can be discussed further by contacting your local Wenzel representative.
Performance
Reliability
Service
-
4th ED V1.0a
Tool Description
Drive Shaft & Universal Joint
Adjustable Bent Housing
Power Section
Dump Sub
Bearing AssemblyThe Bearing Assembly contains the rotating output shaftand must resist the extreme radial and axial forces appliedto the motor when in use.Wenzel Downhole provides several different bearingassemblies, desiigned to meet the diverse requirementsof the drilling industry.These bearing assemblies utilize components specificallydesigned to withstand the increased torques developedby current power sections.
Located between the stator and the bearing assembly, the Adjustable Bent Housing is a device which permits an adjustable bend to be set in the motor to provide directional drilling ability and control. The bent housing is adjusted on the rig floor and can provide bend settings from 0 to 3 or 0 to 4.The Wenzel Adjustable Bent Housing provides an automatic crown lift feature designed to minimize difficulties encountered with sticking or seized adjusting crowns.An oversized bore through the Wenzel Adjustable Bent Housing will accept the large diameter drive lines and universal joints necessary to transmit the higher torques developed by todays power sections.
This normally open valve allows drilling fluid to fill the drill pipe when running into the hole and drain the drill pipe when pulling out of the hole or making a connection. The valve automatically closes when circulation is established and re-opens when circulation is stopped.
The Drive Shaft fitted with a Universal Joint at each end, connects the rotor in the power section to the output mandrel in the bearing assembly. The Universal Joints change the eccentric rotation of the rotor, to concentric rotation of the output mandrel.The Wenzel Drive Shaft and sealed Universal Joints incorporate an exclusive patented design, providing greatly increased torsioned strength and life over traditional ball type universal joints.
The Moineu principle progressing cavity power section converts hydraulic horsepower of the drilling fluid (pressure and flow) into mechanical horsepower (torque and rpm).The performance characteristics of these power sections are determined by the lobe configuration and number of stages.Typically, torque is a function of the flow rate.Wenzel Downhole offers a wide range of power section configurations to provide the performance characteristics required by our customers.
-
4th ED V1.0a
Motor ServicingServicing
-
4th ED V1.0a
Motor Servicing
Motor Servicing
Wenzel Downhole recommends that its downhole motors be serviced at an authorized Wenzel service center.
At the service center, the motors are visually inspected, fl ushed and if necessary run in the test stand. The motors are then disassembled and all parts are thoroughly cleaned and inspected. All threaded connections and critical areas are magnetic particle inspected by qualifi ed inspectors. All seals and worn parts are replaced, the motor is re-assembled, and all connections torqued to the recommended values.
A detailed service report is prepared; recording the incoming condition, inspection reports, parts replaced, and any other pertinent data.
With the Insite management tool, detailed asset history is maintained. Some of the information maintained in the system includes
Customer detailsRigLocationOperatorWell informationDrilling parametersOutgoing tool confi gurationIncoming tool conditionComplete service and repair informationAccumulated operating hours and/or operating days on each componentTime between component reworksPower section detailsMaterial traceability
-
4th ED V1.0a
Specifi cationsSpecifi cations
-
4th ED V1.0a
Build Rate Prediction TableFo
r A
djus
tabl
e M
otor
s 0
to
3
Ben
d S
etti
ng
Deg
rees
4 1/
24
3/4
5 1/
26
6 1/
46
3/4
7 7/
88
1/2
8 3/
48
1/2
8 3/
49
7/8
9 7/
810
5/8
12 1
/412
1/4
14 3
/417
1/2
0.00
0.39
0.9
1.4
0.6
2.1
0.4
1.1
0.6
1.2
1.2
0.78
6.6
4.2
4.5
3.7
2.1
5.1
3.4
2.8
4.0
3.4
0.9
3.8
2.5
3.4
0.5
1.15
11.9
9.5
2.3
7.5
6.7
5.1
7.9
6.3
5.6
6.7
6.1
3.6
6.2
4.9
2.3
5.5
2.6
1.50
17.0
14.6
7.4
10.4
9.6
8.0
10.6
9.0
8.3
9.3
8.7
6.2
8.5
7.2
4.6
7.5
4.6
1.5
1.83
21.8
19.4
12.2
13.1
12.3
10.7
13.2
11.5
10.9
11.7
11.1
8.6
10.7
9.4
6.7
9.4
6.4
3.4
2.12
26.1
23.7
16.4
15.4
14.6
13.0
15.4
13.7
13.1
13.8
13.3
10.7
12.6
11.3
8.6
11.0
8.1
5.0
2.38
29.8
27.4
20.2
17.6
16.7
15.1
17.4
15.7
15.1
15.7
15.2
12.6
14.3
13.0
10.3
12.5
9.6
6.5
2.60
33.0
30.6
23.4
19.3
18.5
16.9
19.1
17.4
16.8
17.3
16.8
14.2
15.8
14.5
11.8
13.8
10.8
7.7
2.77
35.5
33.1
25.9
20.7
19.9
18.3
20.4
18.7
18.1
18.6
18.0
15.5
16.9
15.6
12.9
14.8
11.8
8.7
2.89
37.3
34.9
27.6
21.7
20.9
19.3
21.3
19.7
19.0
19.5
18.9
16.3
17.7
16.4
13.7
15.4
12.5
9.3
3.00
38.9
36.5
29.2
22.6
21.8
20.1
22.2
20.5
19.8
20.3
19.7
17.2
18.4
17.1
14.4
16.1
13.1
10.0
No
tes:
Rate
s ar
e g
iven
for t
ypic
al s
lick
mo
tor c
on
figu
rati
on
s.1.
Dri
ll st
rin
g ro
tati
on
at b
end
set
tin
gs
abo
ve 1
.50
is n
ot r
eco
mm
end
ed.
2.Bu
ild ra
te p
red
icti
on
s ar
e b
ased
on
3 p
oin
t geo
met
ry a
nd
are
theo
reti
cal o
nly
.Pl
ease
co
nta
ct o
ur o
ffic
e fo
r co
nfig
ura
tio
n s
pec
ific
pre
dic
tio
ns.
Act
ual
bu
ild ra
tes
dep
end
on
man
y fa
cto
rs.
3.Fo
r per
form
ance
dri
llin
g a
pp
licat
ion
s, w
her
e th
e m
oto
r is
set a
t 1.1
5 o
r les
s,d
rill
stri
ng
rota
ry s
pee
d s
ho
uld
be
kep
t un
der
120
rpm
.
4.Fo
r dir
ecti
on
al d
rilli
ng
ap
plic
atio
ns,
wh
ere
the
mo
tor i
s se
t 1.5
or l
ess,
d
rill
stri
ng
rota
ry s
pee
d s
ho
uld
be
kep
t un
der
60
rpm
.
Ho
le S
ize
Ho
le S
ize
Ho
le S
ize
Ho
le S
ize
Ho
le S
ize
Ho
le S
ize
6 3/
49
1/2
3 1/
26
1/2
8
Deg
rees
per
100
feet
Mo
tor S
izes
4 3/
4
-
4th ED V1.0a
Build Rate Prediction TableFo
r A
djus
tabl
e M
otor
s 0
to
4
Ben
d S
etti
ng
Ho
le S
ize
Ho
le S
ize
Ho
le S
ize
Ho
le S
ize
Ho
le S
ize
Ho
le S
ize
Deg
rees
3 1/
24
1/2
3 7/
84
3/4
4 3/
45
7/8
0.00
0.35
4.2
3.8
0.6
0.69
10.6
9.4
1.0
5.8
1.04
17.1
0.4
15.2
6.7
11.0
1.9
1.37
23.3
6.5
20.6
12.2
16.0
6.9
1.69
29.2
12.5
25.9
17.4
20.8
11.7
2.00
35.0
18.2
31.0
22.5
25.4
16.4
2.29
40.4
23.6
35.8
27.2
29.8
20.7
2.57
45.7
28.8
40.4
31.8
34.0
24.9
No
tes:
2.83
50.5
33.6
44.7
36.1
37.9
28.8
1.D
rill
stri
ng
rota
tio
n a
t ben
d s
etti
ng
s ab
ove
1.5
0 is
no
t rec
om
men
ded
.3.
0654
.837
.848
.539
.941
.432
.33.
2858
.941
.952
.143
.544
.735
.62.
Build
rate
pre
dic
tio
ns
are
bas
ed o
n 3
po
intg
eom
etry
an
d a
re th
eore
tica
l3.
4662
.345
.255
.146
.447
.438
.3o
nly
. A
ctu
al b
uild
rate
s d
epen
d o
n m
any
fact
ors
.3.
6365
.548
.457
.949
.249
.940
.83.
7667
.950
.860
.051
.351
.942
.83.
Forp
erfo
rman
ce d
rilli
ng
ap
plic
atio
ns,
wh
ere
the
mo
tor i
s se
t at 1
.15
or l
ess,
3.86
69.8
52.7
61.7
53.0
53.4
44.3
dri
ll st
rin
g ro
tary
sp
eed
sh
ou
ld b
e ke
pt u
nd
er 1
20 rp
m.
3.94
71.2
54.1
63.0
54.3
54.6
45.5
3.98
72.0
54.9
63.7
54.9
55.2
46.1
4.Fo
r dir
ecti
on
al d
rilli
ng
ap
plic
atio
ns,
wh
ere
the
mo
tor i
s se
t 1.5
or l
ess,
4.00
72.4
55.3
64.0
55.3
55.5
46.4
dri
ll st
rin
g ro
tary
sp
eed
sh
ou
ld b
e ke
pt u
nd
er 6
0 rp
m.
Rate
s ar
e g
iven
for t
ypic
al s
lick
mo
tor c
on
figu
rati
on
s.Pl
ease
co
nta
ct o
ur o
ffic
e fo
r co
nfig
ura
tio
n s
pec
ific
pre
dic
tio
ns.
Deg
rees
per
100
feet
Mo
tor S
izes
2 7/
83
1/8
3 1/
2
-
4th ED V1.0a
Break connection and unscrew using
a chain tong to expose teeth
Wenzel Easy-Set III Adjustable Bent HousingsSeries 22 (0 to 3)Setting Procedure
Turn left or right to desired bend setting
(Maximum rotation (total) is limited to 1/2 turn by
internal stop. The internal stop will prevent rotating
past 0 ot 3 setting.)
Turn the Lock Housing, using a chain tong, to lower the Crown to the Adjustable Bent Sub. Maintain alignment of desired setting marks
while turning. Torque to recommended value.
RECOMMENDED MAKE UP TORQUESTOOL SIZE (Inches) TORQUE (ft.lbs) TORQUE (Nm)
3 1/2 5500 75004 3/4 - 5 1/86 1/2 - 6 3/4
15,00035,000
20 30047 450
ADJUSTABLEBENT SUB
CROWN
LOCKHOUSING
STATOR
ADJUSTABLEBENT SUB
CROWN
LOCKHOUSING
STATOR
ADJUSTABLEBENT SUB
CROWN
LOCKHOUSING
STATOR
7 3/4 40,000 54 200 8 45,000 61 0009 1/2 60,000 81 300
Adjustable Bent Housing
-
4th ED V1.0a
Adjustable Bent Housing
-
4th ED V1.0a
Adjustable Bent Housing
2 DEGREES 3 DEGREES 4 DEGREES
0.00 0.00 0.000.26 0.39 0.350.52 0.78 0.690.77 1.15 1.041.00 1.50 1.371.22 1.83 1.691.41 2.12 2.001.59 2.38 2.291.73 2.60 2.571.85 2.77 2.831.93 2.89 3.061.98 2.97 3.282.00 3.00 3.46
3.633.763.863.943.984.00
-
4th ED V1.0a
Motor Confi gurationsBit
Speed
Inch
mmgpm
lpmRev
/ Gal
Rev / l
rpmft
lbs.
N m
ft lbs
.N
mPSI
kPa2
7/8
73
7/
8 m
l 2 s
tg. A
ir70
- 1
3026
4 -
492
2.15
40.
569
150
- 28
036
048
854
573
930
020
692
7/8
73
7/
8 m
l 3 s
tg.
50 -
100
189
- 37
82.
700
0.71
413
5 -
270
440
597
690
936
450
3103
2 7/
879
7/8
ml 3
.7 s
tg.
60 -
130
227
- 49
22.
300
0.60
813
8 -
299
733
994
1,10
014
9164
844
643
1/2
89
7/
8 m
l 3.8
stg
.75
- 1
5028
4 -
568
1.57
00.
415
118
- 23
51,
103
1495
1,65
522
4366
545
854
3/4
(5)
121
(127
)5/
6 m
l 6 s
tg.
150
- 35
056
8 -
1325
0.85
00.
225
127
- 29
63,
214
4358
4,82
065
351,
050
7240
4 3/
4 (5
)12
1 (1
27)
5/6
ml 8
.3 s
tg.
100
- 27
537
9 -
1041
1.03
00.
270
103
- 28
33,
100
4204
4,65
063
051,
130
7797
4 3/
4 (5
)12
1 (1
27)
5/6
ml 8
.3 s
tg. H
R12
5 -
275
470
- 10
411.
040
0.27
513
0 -
280
6,42
087
069,
650
13 0
852,
490
17 1
694
3/4
(5)
121
(127
)6/
7 m
l 8.0
stg
, HR
150
- 35
056
8 -
1325
0.80
70.
213
121
- 29
05,
720
7756
8,58
011
634
1,80
012
411
4 3/
4 (5
)12
1 (1
27)
7/8
ml 2
.2 s
tg. S
low
100
- 30
037
9 -
1136
0.30
00.
079
30 -
92
2,72
937
014,
093
5550
385
2655
4 3/
4 (5
)12
1 (1
27)
7/8
ml 2
.2 s
tg S
lo H
R10
0 -
300
379
- 11
360.
300
0.07
930
- 9
23,
900
5290
7,80
010
577
550
3792
4 3/
4 (5
)12
1 (1
27)
7/8
ml 2
.6 s
tg.
150
- 30
056
8 -
1136
0.26
00.
069
39 -
79
3,50
047
465,
250
7119
390
2689
4 3/
4 (5
)12
1 (1
27)
7/8
ml 2
.6 s
tg. H
R15
0 -
300
568
- 11
360.
260
0.06
939
- 7
95,
250
7119
7,88
010
685
590
4068
4 3/
4 (5
)12
1 (1
27)
7/8
ml 3
.7 s
tg.
100
- 27
537
9 -
1041
0.35
60.
094
36 -
98
3,81
051
665,
710
7743
560
3861
4 3/
4 (5
)12
1 (1
27)
7/8
ml 3
.7 s
tg. H
R10
0 -
275
379
- 10
410.
356
0.09
436
- 9
85,
710
7743
8,56
011
607
840
5792
4 3/
4 (5
)12
1 (1
27)
7/8
ml 3
.8 s
tg.
100
- 27
537
9 -
1041
0.51
00.
135
51 -
140
2,81
038
104,
215
5715
665
4585
4 3/
4 (5
)12
1 (1
27)
7/8
ml 3
.8 s
tg. H
R15
0 -
250
568
- 94
60.
520
0.13
778
- 1
304,
450
6034
6,67
09
045
860
5930
4 3/
4 (5
)12
1 (1
27)
7/8
ml 5
stg
.15
0 -
300
568
- 11
360.
630
0.16
694
- 1
893,
193
4330
4,78
964
9387
560
334
3/4
(5)
121
(127
)7/
8 m
l 5 s
tg. H
R15
0 -
300
568
- 11
360.
630
0.16
694
- 1
894,
565
6190
9,13
012
380
1,25
086
204
3/4
(5)
121
(127
)9/
10 2
.1 s
tg15
0 -
300
568-
1136
0.17
00.
037
26 -
51
5,32
272
177,
983
10 8
2536
224
96
Stall T
orque
Max. D
ifferen
tial
SizeCon
figurat
ionFlo
w Rate
sSpe
ed Rat
ioMa
xium T
orque
-
4th ED V1.0a
Motor Confi gurations cont . . .
Bit Sp
eedInc
hmm
gpmlpm
Rev / G
alRev
/ lrpm
ft lbs
.N
mft
lbs.
N m
PSIkPa
6 1/
216
5
4/5
ml 7
stg
.30
0 -
600
1136
- 2
271
0.49
70.
131
149
- 30
06,
060
8220
9,09
012
330
1,05
07,
240
6 1/
216
5
4/5
ml 7
stg
. HR
300
- 60
011
36 -
227
10.
497
0.13
114
9 -
300
9,09
012
325
13,6
3518
490
1,58
010
895
6 1/
2 (6
1/4
)16
5 (1
59)
6/7
ml 5
stg
.20
0 -
500
757
- 18
930.
350
0.09
068
- 1
696,
652
9018
9,97
813
528
875
6033
6 1/
2 (6
1/4
)16
5 (1
59)
6/7
ml 5
stg
. HR
200
- 50
075
7 -
1893
0.35
00.
090
68 -
169
9,51
012
895
19,0
2025
791
1,25
086
206
1/2
(6 3
/4)
165
(171
)6/
7 m
l 5 s
tg.
300
- 60
011
36 -
227
10.
290
0.07
787
- 1
747,
280
9870
10,9
2014
806
875
6033
6 1/
2 (6
3/4
)16
5 (1
71)
6/7
ml 5
stg
. HR
300
- 60
011
36 -
227
10.
290
0.07
787
- 1
7410
,400
14 1
0020
,800
28 2
001,
250
8620
6 1/
216
57/
8 m
l 2.1
stg
.30
0 -
600
1135
- 2
271
0.11
00.
029
34 -
69
6,74
591
4510
,117
13 7
1736
825
376
1/2
165
7/8
ml 2
.1 s
tg. H
R30
0 -
600
1136
- 2
271
0.11
00.
029
34 -
69
9,64
513
077
19,2
9026
150
525
3620
6 1/
2 (6
1/4
)16
5 (1
59)
7/8
ml 3
stg
. Slo
w30
0 -
600
1136
- 2
271
0.20
00.
053
59 -
118
6,53
188
559,
797
13 2
8252
536
206
1/2
(6 1
/4)
165
(159
)7/
8 m
l 3 s
tg. S
lo H
R30
0 -
600
1136
- 2
271
0.20
00.
053
59 -
118
9,14
312
398
18,2
8624
796
735
5068
6 1/
2 (6
3/4
)16
5 (1
71)
7/8
ml 3
stg
. Slo
w30
0 -
600
1136
- 2
271
0.15
00.
040
45 -
90
8,93
712
117
13,4
0618
175
525
3620
6 1/
2 (6
3/4
)16
5 (1
71)
7/8
ml 3
stg
. Slo
HR
300
- 60
011
36 -
227
10.
150
0.04
045
- 9
012
,780
17 3
2725
,560
34 6
5475
051
716
1/2
165
7/8
ml 4
stg
.15
0 -
500
568
- 18
930.
350
0.09
253
- 1
765,
170
7010
7,75
610
515
700
4826
6 1/
216
57/
8 m
l 4 s
tg. H
R20
0 -
600
757
- 22
710.
350
0.09
270
- 2
117,
400
1003
414
,800
20 0
691,
000
6895
6 1/
216
57/
8 m
l 4.8
stg
.20
0 -
500
757
- 18
930.
320
0.08
564
- 1
616,
810
9233
10,2
1513
850
840
5792
6 1/
216
57/
8 m
l 4.8
stg
. HR
200
- 50
075
7 -
1893
0.32
00.
085
64 -
161
9,73
813
205
14,6
0719
807
1,20
082
746
1/2
165
7/8
ml 5
stg
. HR
300
- 60
011
36 -
227
10.
287
0.07
686
- 1
8010
,460
14 1
8415
,690
21 2
761,
130
7790
6 1/
2 (6
3/4
)16
5 (1
71)
7/8
6 st
g.30
0 -
600
1136
- 2
271
0.26
00.
069
78 -
157
9,52
512
915
14,2
8819
375
1,05
072
396
1/2
(6 3
/4)
165
(171
)7/
8 6
stg.
HR
300
- 60
011
36 -
227
10.
260
0.06
978
- 1
5713
,600
18 4
5020
,410
27 6
701,
500
10 3
406
1/2
(6 3
/4)
165
(171
)9/
10 3
.5 s
tg.
350
- 62
513
25 -
236
60.
150
0.04
053
- 9
410
,752
14 5
7716
,128
21 8
6661
942
68
Max. D
ifferen
tial
SizeCon
figura
tion
Flow R
ates
Speed
Ratio
Maxiu
m Torq
ueSta
ll Torq
ue
-
4th ED V1.0a
Motor Confi gurations cont . . .Bit
Speed
Inch
mmgpm
lpmRev
/ Gal
Rev / l
rpmft
lbs.
N m
ft lbs
.N
mPSI
kPa8
20
36/
7 m
l 6 s
tg.
300
- 900
1136
- 34
070.
263
0.06
979
- 23
710
,427
14,1
3915
,641
21 2
061,
050
7,24
07
3/4
(8)
197
(203
)7/
8 m
l 2.5
stg
. Slo
w30
0 - 9
0011
36 -
3407
0.07
00.
018
22 -
6612
,816
17 3
7619
,224
26 0
6443
830
207
3/4
(8)
197
(203
)7/
8 m
l 2.5
stg
. Slo
HR
300
- 900
1136
- 34
070.
070
0.01
822
- 66
18,3
1424
830
36,6
2849
660
625
4309
7 3/
4 (8
)19
7 (2
03)
7/8
ml 3
stg
.30
0 - 9
0011
36 -
3407
0.17
00.
045
51 -
153
7,55
010
236
11,3
2515
354
525
3620
7 3/
4 (8
)19
7 (2
03)
7/8
ml 4
stg
.30
0 - 9
0011
36 -
3407
0.16
00.
042
48 -
143
11,4
6915
549
17,2
0323
324
700
4826
7 3/
4 (8
)19
7 (2
03)
7/8
ml 4
stg
. HR
400
- 900
1515
- 34
070.
066
0.04
466
- 14
914
,940
20 2
5922
,400
30 3
7490
062
067
3/4
(8)
197
(203
)8/
9 m
l 6 s
tg.
300
- 900
1136
- 34
070.
220
0.05
865
- 19
612
,548
17 0
1218
,821
25 5
181,
050
7239
9 1/
224
15/
6 m
l 3 s
tg.
600
- 120
022
71 -
4542
0.11
20.
030
67 -
135
10,6
8514
489
30,4
0041
222
450
3103
9 1/
224
1
5/6
ml 4
stg
.60
0 - 1
200
2271
- 45
420.
110
0.02
965
- 13
016
,792
22 7
6625
,188
34 1
4970
048
269
1/2
241
5/
6 m
l 5 s
tg.
700
- 130
026
50 -
4920
0.14
00.
036
96 -
180
16,1
2021
850
24,1
7032
770
750
5170
9 1/
224
1
5/6
5 m
l stg
. HR
700
- 130
026
50 -
4920
0.14
00.
036
96 -
180
24,1
7032
770
36,2
6049
160
1,13
077
609
1/2
241
6/
7 m
l 5 s
tg.
600
- 120
022
71 -
4542
0.12
00.
032
76 -
148
18,4
4925
013
27,6
7437
520
875
6033
9 1/
224
1
7/8
ml 2
.5 s
tg. S
low
300
- 900
1136
- 34
070.
070
0.01
822
- 66
12,8
1617
376
19,2
2426
064
438
3020
11 1
/428
6
6/7
ml 3
.5 s
tg. E
RT60
0 - 1
200
2271
- 45
420.
107
0.02
865
- 12
532
,275
43 7
6054
,000
73 2
251,
300
8965
SizeCon
figurat
ionFlo
w Rate
sSpe
ed Rat
ioMa
xium T
orque
Stall T
orque
Max. D
ifferen
tial
-
4th ED V1.0a
Performance Specifications Imperial MetricFlow Range 70 - 130 gpm 264 - 492 lpmSpeed Range 150 - 280 rpm 150 - 280 rpmSpeed Ratio 2.15 rev/gal 0.57 rev/lRecommended Max 300 psi 2,069 kPaDifferential PressureTorque Ratio 1.20 ft lbs/ psi 0.236 Nm/ kPaTorque at Recommended 360 ft lbs 488 NmMax DifferentialStall Torque 545 ft lbs 739 Nm
M6 Motor Specifications Imperial MetricBit Box to Bend 2.73 ft 0.83 mHole Size 3 - 4 89 - 114 mmStandard Bit Box Thread 2 3/8 Reg 2 3/8 RegMax WOB 11,400 lbs 5,100 daNMax Pull while back Reaming 19,000 lbs 8,500 daNAbsolute Overpull 157,000 lbs 69,800 daNTool Weight 210 lbs 95 kgLength 13.22 ft 4.03 mAdjustable Torque (S15) 1,500 ft lbs Left 2,032 Nm LeftStabilizer Torque 600 ft lbs 814 Nm
2 7/8 73 mm 7/8 - 2 Stage Air
-
4th ED V1.0a
Performance Specifications Imperial MetricFlow Range 50 - 100 gal 189 - 378 lpmSpeed Range 135 - 270 rpm 135 - 270 rpmSpeed Ratio 2.70 rev/gal 0.714 rev/lRecommended Max 450 psi 3,103 kPaDifferential PressureTorque Ratio 0.977 ft lbs/ psi 0.192 Nm/ kPaTorque at Recommended 440 ft lbs 597 NmMax DifferentialStall Torque 690 ft lbs 936 Nm
M6 Motor Specifications Imperial MetricBit Box to Bend 2.73 ft 0.83 mHole Size 3 - 4 89 - 114 mmStandard Bit Box Thread 2 3/8 Reg 2 3/8 RegMax WOB 11,400 lbs 5,100 daNMax Pull while back Reaming 19,000 lbs 8,500 daNAbsolute Overpull 157,000 lbs 69,800 daNTool Weight 225 lbs 102 kgLength 14.22 ft 4.33 mAdjustable Torque (S15) 1,500 ft lbs Left 2,032 Nm LeftStabilizer Torque 600 ft lbs 814 Nm
2 7/8 73 mm 7/8 - 3 Stage
-
4th ED V1.0a
Performance Specifications Imperial MetricFlow Range 60 - 130 gal 227 - 492 lpmSpeed Range 138 - 229 rpm 138 - 229 rpmSpeed Ratio 2.30 rev/gal 0.608 rev/lRecommended Max 648 psi 4,464 kPaDifferential PressureTorque Ratio 1.13 ft lbs/ psi 0.223 Nm/ kPaTorque at Recommended 733 ft lbs 994 NmMax DifferentialStall Torque 1100 ft lbs 1491 Nm
M6 Motor Specifications Imperial MetricBit Box to Bend 2.73 ft 0.83 mHole Size 3 - 4 89 - 114 mmStandard Bit Box Thread 2 3/8 Reg 2 3/8 RegMax WOB 11,400 lbs 5,100 daNMax Pull while back Reaming 19,000 lbs 8,500 daNAbsolute Overpull 157,000 lbs 69,800 daNTool Weight 240 lbs 110 kgLength (Fixed Bend) 15.3 ft 4.66 mAdjustable Torque (S15) 1,500 ft lbs Left 2,032 Nm LeftStabilizer Torque 600 ft lbs 814 Nm
2 7/8 73 mm 7/8 - 3.7 Stage
100
200
300
200(270)
400(540)
600(810)
800(1085)
2.88 (73 mm) 7-8 3.7 Stg.
SPEE
D [r
pm
]
DIFFERENTIAL PRESSURE [psi (kPa)]
TORQ
UE
[ft-
lb (N
.m)]
200(1380)
60 gpm(227 lpm)
130 gpm(492 lpm)
600(4140)
400(2760)
80 gpm(303 lpm)
100 gpm(378 lpm)
TORQ
UE
FULLLOAD
-
4th ED V1.0a
Performance Specifications Imperial MetricFlow Range 75 - 150 gpm 284 - 568 lpmSpeed Range 118 - 235 rpm 118 - 235 rpmSpeed Ratio 1.57 rev/gal 0.41 rev/lRecommended Max 660 psi 4,550 kPaDifferential PressureTorque Ratio 1.67 ft lbs/ psi 0.33 Nm/ kPaTorque at Recommended 1,100 ft lbs 1,490 NmMax DifferentialStall Torque 1,655 ft lbs 2,243 Nm
M6 Motor Specifications Imperial MetricBit Box to Bend - ABH 3.11 ft .95 m Bit box to Bend - FBH 2.5 ft .77 mHole Size 4 - 5 7/8 108 - 149 mmStandard Bit Box Thread 2 7/8 Reg 2 7/8 RegMax WOB 18,500 lbs 8,200 daNMax Pull while back Reaming 30,900 lbs 13,750 daNAbsolute Overpull 226,000 lbs 100,500 daNTool Weight 415 lbs 188 kgLength 18.07 ft 5.51 mAdjustable Torque (S22) 5,500 ft lbs 7,500 NmStabilizer Torque 2,200 ft lbs 2,983 Nm
3 1/2 89 mm 7/8 - 3.8 Stage
-
4th ED V1.0a
Performance Specifications Imperial MetricFlow Range 150 - 350 gpm 568 - 1,325 lpmSpeed Range 127 - 296 rpm 127 - 296 rpmSpeed Ratio 0.85 rev/gal 0.225 rev/lRecommended Max 1,050 psi 7,240 kPaDifferential PressureTorque Ratio 3.06 ft lbs/ psi 0.60 Nm/ kPaTorque at Recommended 3,214 ft lbs 4,358 NmMax DifferentialStall Torque 4,820 ft lbs 6,536 Nm
M5 Motor Specifications Imperial MetricBit Box to Bend - ABH 5.13 ft 1.56 mBit Box to Bend - FBH 4.22 ft 1.29 m Hole Size 5 7/8 - 7 7/8 149 - 200 mmStandard Bit Box Thread 3 Reg 3 RegMax WOB 53,300 lbs 23,700 daNMax Pull while back Reaming 52,400 lbs 23,300 daNAbsolute Overpull 515,000 lbs 229,100 daNTool Weight 1210 lbs 550 kgLength 27.1 ft 8.27 mAdjustable Torque (S22) 15,000 ft lbs 20,300 NmAdjustable Torque (S14) 10,000 ft lbs Left 13,500 Nm LeftStabilizer Torque 6,000 ft lbs 8,000 Nm
4 3/4* 121 mm 5/6 - 6 Stage
4.75/5.00 (121/127) 5-6 6 Stg.
*Supplied with 5(127mm) O.D. power section in some regions.
-
4th ED V1.0a
Performance Specifications Imperial MetricFlow Range 100 - 275 gpm 379 - 1,041 lpmSpeed Range 103 - 283 rpm 103 - 283 rpmSpeed Ratio 1.03 rev/gal 0.27 rev/lRecommended Max 1,130 psi 7,793 kPaDifferential PressureTorque Ratio 2.74 ft lbs/ psi 0.539 Nm/ kPaTorque at Recommended 3,100 ft lbs 4,204 NmMax DifferentialStall Torque 4,650 ft lbs 6,305 Nm
M5 Motor Specifications Imperial MetricBit Box to Bend - ABH 5.13 ft 1.56 mBit Box to Bend - FBH 4.22 ft 1.29 m Hole Size 5 7/8 - 7 7/8 149 - 200 mmStandard Bit Box Thread 3 Reg 3 RegMax WOB 53,300 lbs 23,700 daNMax Pull while back Reaming 52,400 lbs 23,300 daNAbsolute Overpull 515,000 lbs 229,100 daNTool Weight 1400 lbs 640 kgLength 31.54 ft 9.61 mAdjustable Torque (S22) 15,000 ft lbs 20,300 NmAdjustable Torque (S14) 10,000 ft lbs Left 13,500 Nm LeftStabilizer Torque 6,000 ft lbs 8,000 Nm
4 3/4* 121 mm 5/6 - 8.3 Stage
4.75/5.00 (121/127mm) 5-6 8.3 Stg.
*Supplied with 5(127mm) O.D. power section in some regions.
-
4th ED V1.0a
Performance Specifications Imperial MetricFlow Range 125 - 275 gpm 473 - 1041 lpmSpeed Range 130 - 280 rpm 130 - 280 rpmSpeed Ratio 1.040 rev/gal 0.275 rev/lRecommended Max 2490 psi 17,169 kPaDifferential PressureTorque Ratio 2.58 ft lbs/ psi 0.51 Nm/ kPaTorque at Recommended 6420 ft lbs 8706 NmMax DifferentialStall Torque 9650 ft lbs 13,085 Nm
M5 Motor Specifications Imperial MetricBit Box to Bend - ABH 5.13 ft 1.56 mBit Box to Bend - FBH 4.22 ft 1.29 m Hole Size 5 7/8 - 7 7/8 149 - 200 mmStandard Bit Box Thread 3 Reg 3 RegMax WOB 53,300 lbs 23,700 daNMax Pull while back Reaming 52,400 lbs 23,300 daNAbsolute Overpull 515,000 lbs 229,100 daNTool Weight 1400 lbs 640 kgLength 31.54 ft 9.61 mAdjustable Torque (S22) 15,000 ft lbs 20,300 NmAdjustable Torque (S14) 10,000 ft lbs Left 13,500 Nm LeftStabilizer Torque 6,000 ft lbs 8,000 Nm
4 3/4* 121 mm 5/6-8.3 Stage HR
2000(2710)
4000(5425)
6000(8135)
8000(10 850)
5.00 (127 mm) 5-6 8.3 Stg. D
250
200
100
50
150
DIFFERENTIAL PRESSURE [psi (kPa)]
TORQ
UE
[ft-
lb (N
.m)]
SPEE
D [r
pm
]
275 gpm(1040 lpm)
200 gpm(760 lpm)
125 gpm(470 lpm)
2000(13 790)
2500(17 237)
1500(10 342)
1000(6895)
500(3447)
FULLLOAD
TORQ
UE
*Supplied with 5(127mm) O.D. power section in some regions.
-
4th ED V1.0a
Performance Specifications Imperial MetricFlow Range 150 - 350 gpm 568 - 1325 lpmSpeed Range 121 - 290 rpm 121 - 290 rpmSpeed Ratio 0.807 rev/gal 0.213 rev/lRecommended Max 1800 psi 12,411 kPaDifferential PressureTorque Ratio 3.18 ft lbs/ psi 0.62 Nm/ kPaTorque at Recommended 5720 ft lbs 7756NmMax DifferentialStall Torque 8580 ft lbs 11,634 Nm
M5 Motor Specifications Imperial MetricBit Box to Bend - ABH 5.13 ft 1.56 mBit Box to Bend - FBH 4.22 ft 1.29 mHole Size 5 7/8 - 7 7/8 149 - 200 mmStandard Bit Box Thread 3 Reg 3 RegMax WOB 53,300 lbs 23,700 daNMax Pull while back Reaming 52,400 lbs 23,300 daNAbsolute Overpull 515,000 lbs 229,100 daNTool Weight 1415 lbs 640 kgLength 31.75 ft 9.68 mAdjustable Torque (S22) 15,000 ft lbs 20,300 NmAdjustable Torque (S14) 10,000 ft lbs Left 13,500 Nm LeftStabilizer Torque 6,000 ft lbs 8,000 Nm
4 3/4* 121 mm 6/7 - 8 Stage HR
250
250 gpm (946 lpm)
50
100
150
200
150 gpm(567 lpm)
500(3450)
4.75/5.00 (121/127 mm) 6-7 8 Stg. HR
TORQ
UE
[ft-
lb (N
.m)]
SPEE
D [r
pm
]
DIFFERENTIAL PRESSURE [psi (kPa)]
1000(1355)
3000(4065)
1000(6890)
1500(10,340)
350 gpm (1324 lpm)
5000(6780)
7000(9490)
TORQ
UE
FULLLOAD
*Supplied with 5(127mm) O.D. power section in some regions.
-
4th ED V1.0a
Performance Specifications Imperial MetricFlow Range 100 - 300 gpm 379 - 1,136 lpmSpeed Range 30 - 92 rpm 30 - 92 rpmSpeed Ratio 0.30 rev/gal 0.079 rev/lRecommended Max 385 psi 2,655 kPaDifferential PressureTorque Ratio 7.09 ft lbs/ psi 1,394 Nm/ kPaTorque at Recommended 2,729 ft lbs 3,700 NmMax DifferentialStall Torque 4,093 ft lbs 5,550 Nm
M5 Motor Specifications Imperial MetricBit Box to Bend - ABH 5.13 ft 1.56 mBit Box to Bend - FBH 4.22 ft 1.29 mHole Size 5 7/8 - 7 7/8 149 - 200 mmStandard Bit Box Thread 3 Reg 3 RegMax WOB 53,300 lbs 23,700 daNMax Pull while back Reaming 52,400 lbs 23,300 daNAbsolute Overpull 515,000 lbs 229,100 daNTool Weight 1240 lbs 560 kgLength 27.80 ft 8.47 mAdjustable Torque (S22) 15,000 ft lbs 20,300 NmAdjustable Torque (S14) 10,000 ft lbs Left 13,500 Nm LeftStabilizer Torque 6,000 ft lbs 8,000 Nm
4 3/4* 121 mm 7/8 -2.2 Stg.Slow
4.75/5.00 (121/127 mm) 7-8 2.2 Stg. True Slow
*Supplied with 5(127mm) O.D. power section in some regions.
-
4th ED V1.0a
Performance Specifications Imperial MetricFlow Range 100 - 300 gpm 379 - 1136 lpmSpeed Range 30 - 92 rpm 30 - 92 rpmSpeed Ratio 0.30 rev/gal 0.079 rev/lRecommended Max 550 psi 3,792 kPaDifferential PressureTorque Ratio 7.09 ft lbs/ psi 1.395 Nm/ kPaTorque at Recommended 3,900 ft lbs 5,290 NmMax DifferentialStall Torque 7,800 ft lbs 10,580 Nm
M5 Motor Specifications Imperial MetricBit Box to Bend - ABH 5.13 ft 1.56 mBit Box to Bend - FBH 4.22 ft 1.29 mHole Size 5 7/8 - 7 7/8 149 - 200 mmStandard Bit Box Thread 3 Reg 3 RegMax WOB 53,300 lbs 23,700 daNMax Pull while back Reaming 52,400 lbs 23,300 daNAbsolute Overpull 515,000 lbs 229,100 daNTool Weight 1240 lbs 560 kgLength 27.80 ft 8.47 mAdjustable Torque (S22) 15,000 ft lbs 20,300 NmAdjustable Torque (S14) 10,000 ft lbs Left 13,500 Nm LeftStabilizer Torque 6,000 ft lbs 8,000 Nm
4 3/4* 121mm 7/8-2.2 Stg. H.R.
20
40
60
80
4.75/5.00 (121/127 mm) 7-8 2.2 Stg. Slo HR
TOR
QU
E [f
t-lb
(N.m
)]
SPEE
D [r
pm
]
DIFFERENTIAL PRESSURE [psi (kPa)]
TORQ
UE
300(2070)
600(4137)
100(690)
200(1379)
400(2758)
500(3447)
2000(2710)
4000(5425)
1000(1355)
3000(4065)
300 gpm(1135 lpm)
175 gpm(660 lpm)
250 gpm(945 lpm)
100 gpm(380 lpm)
FULLLOAD
*Supplied with 5(127mm) O.D. power section in some regions.
-
4th ED V1.0a
Performance Specifications Imperial MetricFlow Range 150 - 300 gpm 568 - 1,136 lpmSpeed Range 39 - 79 rpm 39 - 79 rpmSpeed Ratio 0.26 rev/gal 0.069 rev/lRecommended Max 390 psi 2689 kPaDifferential PressureTorque Ratio 8.97 ft lbs/ psi 1.76 Nm/ kPaTorque at Recommended 3500 ft lbs 4746 NmMax DifferentialStall Torque 5250 ft lbs 7120 Nm
M5 Motor Specifications Imperial MetricBit Box to Bend - ABH 5.13 ft 1.56 mBit Box to Bend - FBH 4.22 ft 1.29 m Hole Size 5 7/8 - 7 7/8 149 - 200 mmStandard Bit Box Thread 3 Reg 3 RegMax WOB 53,300 lbs 23,700 daNMax Pull while back Reaming 52,400 lbs 23,300 daNAbsolute Overpull 515,000 lbs 229,100 daNTool Weight 1350 lbs 610 kgLength 30.62 ft 9.33 mAdjustable Torque (S22) 15,000 ft lbs 20,300 Nm Adjustable Torque (S14) 10,000 ft lbs Left 13,500 Nm LeftStabilizer Torque 6,000 ft lbs 8,000 Nm
4 3/4* 121 mm 7/8 - 2.6 Stage
4.75/5.00 (121/127 mm 7-8 2.6 Stg.
TORQ
UE
[ft-
lb (N
.m)]
SPEE
D [r
pm
]
150 gpm(570 lpm)
400(2758)
200(1379)
100(690)
300(2070)
DIFFERENTIAL PRESSURE [psi (kPa)]
225 gpm(850 lpm)
300 gpm(1335 lpm)
FULLLOAD
TORQ
UE
1000(1350)
2000(2710)
3000(4065)
4000(5423)
5000(6780)
6000(8135)
40
30
20
10
50
60
70
80
*Supplied with 5(127mm) O.D. power section in some regions.
-
4th ED V1.0a
Performance Specifications Imperial MetricFlow Range 150 - 300 gpm 568 - 1,136 lpmSpeed Range 39 - 79 rpm 39 - 79 rpmSpeed Ratio 0.26 rev/gal 0.069 rev/lRecommended Max 590 psi 4068 kPaDifferential PressureTorque Ratio 8.97 ft lbs/ psi 1.76 Nm/ kPaTorque at Recommended 5250 ft lbs 7118 NmMax DifferentialStall Torque 7880 ft lbs 10 683 Nm
M5 Motor Specifications Imperial MetricBit Box to Bend - ABH 5.13 ft 1.56 mBit Box to Bend - FBH 4.22 ft 1.29 m Hole Size 5 7/8 - 7 7/8 149 - 200 mmStandard Bit Box Thread 3 Reg 3 RegMax WOB 53,300 lbs 23,700 daNMax Pull while back Reaming 52,400 lbs 23,300 daNAbsolute Overpull 515,000 lbs 229,100 daNTool Weight 1350 lbs 610 kgLength 30.62 ft 9.33 mAdjustable Torque (S22) 15,000 ft lbs 20,300 NmAdjustable Torque (S14) 10,000 ft lbs Left 13,500 Nm LeftStabilizer Torque 6,000 ft lbs 8,000 Nm
4 3/4* 121 mm 7/8 - 2.6 Stg.HRSP
EED
[rp
m]
150 gpm(570 lpm)
225 gpm(850 lpm)
300 gpm(1335 lpm)
40
30
20
10
50
60
70
80
TORQ
UE
[ft-
lb (N
.m)]
1000(1350)
2000(2710)
3000(4065)
4000(5423)
5000(6780)
6000(8135)
400(2758)
200(1379)
600(4140)
DIFFERENTIAL PRESSURE [psi (kPa)]
FULLLOAD
TORQ
UE
4.75/5.00 (121/127 mm 7-8 2.6 Stg. H.R.*Supplied with 5(127mm) O.D. power section in some regions.
-
4th ED V1.0a
Performance Specifications Imperial MetricFlow Range 100 - 275 gpm 379 - 1041 lpmSpeed Range 36 - 98 rpm 36 - 98 rpmSpeed Ratio 0.356 rev/gal 0.094 rev/lRecommended Max 560 psi 3861 kPaDifferential PressureTorque Ratio 6.85 ft lbs/ psi 1.34 Nm/ kPaTorque at Recommended 3810 ft lbs 5166 NmMax DifferentialStall Torque 5710 ft lbs 7743 Nm
M5 Motor Specifications Imperial MetricBit Box to Bend - ABH 5.13 ft 1.56 mBit Box to Bend - FBH 4.22 ft 1.29 mHole Size 5 7/8 - 7 7/8 149 - 200 mmStandard Bit Box Thread 3 Reg 3 RegMax WOB 53,300 lbs 23,700 daNMax Pull while back Reaming 52,400 lbs 23,300 daNAbsolute Overpull 515,000 lbs 229,000 daNTool Weight 1350 lbs 610 kgLength 30.21 ft 9.21 mAdjustable Torque (S22) 15,000 ft lbs 20,300 NmAdjustable Torque (S14) 10,000 ft lbs Left 13,500 Nm LeftStabilizer Torque 6,000 ft lbs 8,000 Nm
4 3/4* 121mm 7/8 - 3.7 Stage
4000(5425)
100 gpm(380 lpm)
275 gpm(1040 lpm)
185 gpm(700 lpm)
20
40
60
SPEE
D [r
pm
]
80
100
6000(8135)
5000(6780)
3000(4070)
2000(2710)
1000(1355)
4.75/5.00 (121/127 mm) 7-8 3.7 Stg.
TORQ
UE
FULLLOAD T
OR
QU
E [f
t-lb
(N.m
)]
100(690)
400(2760)
DIFFERENTIAL PRESSURE [psi (kPa)]
200(1380)
300(2070)
500(3447)
*Supplied with 5(127mm) O.D. power section in some regions.
-
4th ED V1.0a
Performance Specifications Imperial MetricFlow Range 100 - 275 gpm 379 - 1041 lpmSpeed Range 36 - 98 rpm 36 - 98 rpmSpeed Ratio 0.356 rev/gal 0.094 rev/lRecommended Max 560 psi 3861 kPaDifferential PressureTorque Ratio 6.85 ft lbs/ psi 1.34 Nm/ kPaTorque at Recommended 5710 ft lbs 7743 NmMax DifferentialStall Torque 8560 ft lbs 11,607 Nm
M5 Motor Specifications Imperial MetricBit Box to Bend - ABH 5.13 ft 1.56 mBit Box to Bend - FBH 4.22 ft 1.29 mHole Size 5 7/8 - 7 7/8 149 - 200 mmStandard Bit Box Thread 3 Reg 3 RegMax WOB 53,300 lbs 23,700 daNMax Pull while back Reaming 52,400 lbs 23,300 daNAbsolute Overpull 515,000 lbs 229,000 daNTool Weight 1350 lbs 610 kgLength 30.21 ft 9.21 mAdjustable Torque (S22) 15,000 ft lbs 20,300 NmAdjustable Torque (S14) 10,000 ft lbs Left 13,500 Nm LeftStabilizer Torque 6,000 ft lbs 8,000 Nm
4 3/4* 121mm 7/8-3.7 Stg. HR
4.75/5.00 (121/127 mm) 7-8 3.7 Stg. HR
TOR
QU
E [f
t-lb
(N.m
)]
100 gpm(380 lpm)
275 gpm(1040 lpm)
185 gpm(700 lpm)
20
40
60
SPEE
D [r
pm
]
80
100
4000(5425)
6000(8135)
5000(6780)
3000(4070)
2000(2710)
1000(1355)
TORQ
UEFULLLOAD
600(4140)
400(2760)
200(1380)
DIFFERENTIAL PRESSURE [psi (kPa)]
800(5516)
*Supplied with 5(127mm) O.D. power section in some regions.
-
4th ED V1.0a
Performance Specifications Imperial MetricFlow Range 100 - 275 gpm 379 - 1041 lpmSpeed Range 51 - 140 rpm 51 - 140 rpmSpeed Ratio 0.51 rev/gal 0.135 rev/lRecommended Max 665 psi 4,585 kPaDifferential PressureTorque Ratio 4.23 ft lbs/ psi 0.831 Nm/ kPaTorque at Recommended 2810 ft lbs 3810 NmMax DifferentialStall Torque 4215 ft lbs 5715 Nm
M5 Motor Specifications Imperial MetricBit Box to Bend - ABH 5.13 ft 1.56 mBit Box to Bend - FBH 4.22 ft 1.29 mHole Size 5 7/8 - 7 7/8 149 - 200 mmStandard Bit Box Thread 3 Reg 3 RegMax WOB 53,300 lbs 23,700 daNMax Pull while back Reaming 52,400 lbs 23,300 daNAbsolute Overpull 515,000 lbs 229,100 daNTool Weight 1210 lbs 550 kgLength 27.13 ft 8.27 mAdjustable Torque (S22) 15,000 ft lbs 20,300 NmAdjustable Torque (S14) 10,000 ft lbs Left 13,500 Nm LeftStabilizer Torque 6,000 ft lbs 8,000 Nm
4 3/4* 121 mm 7/8 - 3.8 Stage
500(678)
1000(1350)
1500(2034)
2000(2710)
2500(3390)
40
80
120
4.75/5.00 (121/127 mm 7-8 3.8 Stg.
TORQ
UE
[ft-
lb (N
.m)]
SPEE
D [r
pm
]
600(4140)
400(2758)
200(1379)
100 gpm(379 lpm)
185 gpm(700 lpm)
275 gpm(1041 lpm)
FULLLOAD
DIFFERENTIAL PRESSURE [psi (kPa)]
*Supplied with 5(127mm) O.D. power section in some regions.
-
4th ED V1.0a
Performance Specifications Imperial MetricFlow Range 150 - 250 gpm 568 - lpmSpeed Range 78 - 130 rpm 78 - 130 rpmSpeed Ratio 0.521 rev/gal 0.137 rev/lRecommended Max 860 psi 5930 kPaDifferential PressureTorque Ratio 5.17 ft lbs/ psi 1.02 Nm/ kPaTorque at Recommended 4450 ft lbs 6034 NmMax DifferentialStall Torque 6670 ft lbs 9045 Nm
M5 Motor Specifications Imperial MetricBit Box to Bend - ABH 5.13 ft 1.56 mBit Box to Bend - FBH 4.22 ft 1.29 mHole Size 5 7/8 - 7 7/8 149 - 200 mmStandard Bit Box Thread 3 Reg 3 RegMax WOB 53,300 lbs 23,700 daNMax Pull while back Reaming 52,400 lbs 23,300 daNAbsolute Overpull 515,000 lbs 229,100 daNTool Weight 1210 lbs 550 kgLength 27.13 ft 8.27 mAdjustable Torque (S22) 15,000 ft lbs 20,300 NmAdjustable Torque (S14) 10,000 ft lbs Left 13,500 Nm LeftStabilizer Torque 6,000 ft lbs 8,000 Nm
4 3/4* 121 mm 7/8-3.8 Stg. HR
40
80
120
SPEE
D [r
pm
]
600(4140)
400(2758)
200(1379)
800(5516)
DIFFERENTIAL PRESSURE [psi (kPa)]
150 gpm(570 lpm)
200 gpm(760 lpm)
250 gpm (945 lpm)
1000(1350)
2000(2710)
3000(4065)
4000(5423)
5000(6780)
6000(8135)
4.75/5.00 (121/127 mm 7-8 3.8 Stg. HR
TORQ
UE
[ft-
lb (N
.m)]
TORQ
UE
FULLLOAD
*Supplied with 5(127mm) O.D. power section in some regions.
-
4th ED V1.0a
Performance Specifications Imperial MetricFlow Range 150 - 300 gpm 568 - 1,136 lpmSpeed Range 94 - 189 rpm 94 - 189 rpmSpeed Ratio 0.63 rev/gal 0.166 rev/lRecommended Max 875 psi 6,033 kPaDifferential PressureTorque Ratio 3.65 ft lbs/ psi 0.718 Nm/ kPaTorque at Recommended 3,193 ft lbs 4,329 NmMax DifferentialStall Torque 4,789 ft lbs 6,493 Nm
M5 Motor Specifications Imperial MetricBit Box to Bend - ABH 5.13 ft 1.56 mBit Box to Bend - FBH 4.22 ft 1.29 m Hole Size 5 7/8 - 7 7/8 149 - 200 mmStandard Bit Box Thread 3 Reg 3 RegMax WOB 53,300 lbs 23,700 daNMax Pull while back Reaming 52,400 lbs 23,300 daNAbsolute Overpull 515,000 lbs 229,100 daNTool Weight 1240 lbs 560 kgLength 27.80 ft 8.47 mAdjustable Torque (S22) 15,000 ft lbs 20,300 NmAdjustable Torque (S14) 10,000 ft lbs Left 13,500 Nm LeftStabilizer Torque 6,000 ft lbs 8,000 Nm
4 3/4* 121 mm 7/8 - 5 Stage
4.75/5.00 (121/127 mm) 7-8 5 Stg.
*Supplied with 5(127mm) O.D. power section in some regions.
-
4th ED V1.0a
Performance Specifications Imperial MetricFlow Range 150 - 300 gpm 568 - 1,136 lpmSpeed Range 94 - 189 rpm 94 - 189 rpmSpeed Ratio 0.63 rev/gal 0.166 rev/lRecommended Max 1,250 psi 8,618 kPaDifferential PressureTorque Ratio 3.65 ft lbs/ psi 0.718 Nm/ kPaTorque at Recommended 4,565 ft lbs 6,189 NmMax DifferentialStall Torque 9,130 ft lbs 12,378 Nm
M5 Motor Specifications Imperial MetricBit Box to Bend - ABH 5.13 ft 1.56 mBit Box to Bend - FBH 4.22 ft 1.29 m Hole Size 5 7/8 - 7 7/8 149 - 200 mmStandard Bit Box Thread 3 Reg 3 RegMax WOB 53,300 lbs 23,700 daNMax Pull while back Reaming 52,400 lbs 23,300 daNAbsolute Overpull 515,000 lbs 229,100 daNTool Weight 1240 lbs 560 kgLength 27.80 ft 8.47 mAdjustable Torque (S22) 15,000 ft lbs 20,300 NmAdjustable Torque (S14) 10,000 ft lbs Left 13,500 Nm LeftStabilizer Torque 6,000 ft lbs 8,000 Nm
4 3/4* 121 mm 7/8-5 Stage HR
40
80
120
160
1000(1355)
2000(2710)
3000(4070)
4000(5423)
5000(6780)
4.75/5.00 (121/127 mm) 7-8 5.0 Stg. HR
DIFFERENTIAL PRESSURE [psi (kPa)]
TORQ
UE
[ft-
lb (N
.m)]
SPEE
D [r
pm
]
1200(8874)
400(2760)
800(5516)
300 gpm (1135 lpm)
250 gpm(945 lpm)
200 gpm(760 lpm)
TORQ
UE
FULLLOAD
150 gpm(570 lpm)
*Supplied with 5(127mm) O.D. power section in some regions.
-
4th ED V1.0a
Performance Specifications Imperial MetricFlow Range 150 - 300 gpm 568 - 1,136 lpmSpeed Range 26 - 51 rpm 26 - 51 rpmSpeed Ratio 0.17 rev/gal 0.037 rev/lRecommended Max 362 psi 2500 kPaDifferential PressureTorque Ratio 14.70 ft lbs/ psi 2.89 Nm/ kPaTorque at Recommended 5,322 ft lbs 7,220 NmMax DifferentialStall Torque 7,980 ft lbs 10,825 Nm
M5 Motor Specifications Imperial MetricBit Box to Bend - ABH 5.13 ft 1.56 mBit Box to Bend - FBH 4.22 ft 1.29 m Hole Size 5 7/8 - 7 7/8 149 - 200 mmStandard Bit Box Thread 3 Reg 3 RegMax WOB 53,300 lbs 23,700 daNMax Pull while back Reaming 52,400 lbs 23,300 daNAbsolute Overpull 515,000 lbs 229,000 daNTool Weight 1350 lbs 610 kgLength 30.25 ft 9.22 mAdjustable Torque (S22) 15,000 ft lbs 20,300 NmAdjustable Torque (S14) 10,000 ft lbs Left 13,500 Nm LeftStabilizer Torque 6,000 ft lbs 8,000 Nm
4 3/4* 121 mm 9/10 - 2.1 Stage
10
20
40
4.75/5.00 (121/127 mm) 9-10 2.1 Stg.
DIFFERENTIAL PRESSURE [psi (kPa)]
SPEE
D [r
pm
]
TORQ
UE
[ft-
lb (N
.m)]
150 gpm(568 lpm)
200 gpm(757 lpm)
250 gpm(946 lpm)
200(1379)
100(690)
300(2070)
400(2760)
2000(2710)
4000(5423)
6000(8135)
300 gpm(1136 lpm)
30
50
FULLLOAD
TORQ
UE
*Supplied with 5(127mm) O.D. power section in some regions.
-
4th ED V1.0a
Performance Specifications Imperial MetricFlow Range 300 - 600 gpm 1,136 - 2,271 lpmSpeed Range 149 - 300 rpm 149 - 300 rpmSpeed Ratio 0.497 rev/gal 0.131 rev/lRecommended Max 1,050 psi 7,240 kPaDifferential PressureTorque Ratio 5.77 ft lbs/ psi 1.135 Nm/ kPaTorque at Recommended 6,060 ft lbs 8,220 NmMax DifferentialStall Torque 9,090 ft lbs 12,330 Nm
M6 Motor Specifications Imperial MetricBit Box to Bend - ABH 5.64 ft 1.72 m Bit Box to Bend - FBH 4.71 ft 1.43 mHole Size 7 7/8 - 9 7/8 200 - 250 mmStandard Bit Box Thread 4 1/2 Reg 4 1/2 RegMax WOB 90,200 lbs 40,120 daNMax Pull while back Reaming 85,600 lbs 38,075 daNAbsolute Overpull 780,000 lbs 347,000 daNTool Weight 2450 lbs 1110 kgLength 30.58 ft 9.32 mAdjustable Torque (S22) 35,000 ft lbs 47,450 NmAdjustable Torque (S14) 30,000 ft lbs Left 40,670 Nm LeftStabilizer Torque 12,000 ft lbs 16,300
6 1/2 165 mm 4/5 - 7 Stage
DIFFERENTIAL PRESSURE [psi (kPa)]
TORQ
UE
[ft-
lb (N
.m)]
SPEE
D [r
pm
]
6.50/6.75 (165/171 mm 4-5 7 Stg.)
300(2070)
600(4140)
900(6205)
300
200
100FULLLOAD
9000(12 200)
6000(8135)
3000(4070)
TORQ
UE
600 gpm(2270 lpm)
450 gpm(1705 lpm)
300 gpm(1135 lpm)
-
4th ED V1.0a
Performance Specifications Imperial MetricFlow Range 300 - 600 gpm 1,136 - 2,271 lpmSpeed Range 149 - 300 rpm 149 - 300 rpmSpeed Ratio 0.497 rev/gal 0.131 rev/lRecommended Max 1,580 psi 10,860 kPaDifferential PressureTorque Ratio 5.77 ft lbs/ psi 1.135 Nm/ kPaTorque at Recommended 9,090 ft lbs 12,330 NmMax DifferentialStall Torque 13,630 ft lbs 18,490 Nm
M6 Motor Specifications Imperial MetricBit Box to Bend - ABH 5.64 ft 1.72 m Bit Box to Bend - FBH 4.71 ft 1.43 mHole Size 7 7/8 - 9 7/8 200 - 250 mmStandard Bit Box Thread 4 1/2 Reg 4 1/2 RegMax WOB 90,200 lbs 40,120 daNMax Pull while back Reaming 85,600 lbs 38,075 daNAbsolute Overpull 780,000 lbs 347,000 daNTool Weight 2450 lbs 1110 kgLength 30.58 ft 9.32 mAdjustable Torque (S22) 35,000 ft lbs 47,450 NmAdjustable Torque (S14) 30,000 ft lbs Left 40,670 Nm LeftStabilizer Torque 12,000 ft lbs 16,300 Nm
6 1/2 165 mm 4/5 - 7 Stage HR
100
200
300
300(2070)
900(6210)
1500(10,340)
450 gpm(1703 lpm)
300 gpm(1135 lpm)
600 gpm(2271 lpm)
6.50 (165mm) 4-5 7.0 Stg. HR
DIFFERENTIAL PRESSURE [psi (kPa)]
TORQ
UE
[ft-
lb (N
.m)]
SPEE
D [r
pm
]
TORQ
UE
FULLLOAD
3000(4070)
6000(8135)
9000(12 205)
-
4th ED V1.0a
Performance Specifications Imperial MetricFlow Range 200 - 500 gpm 757 - 1,893 lpmSpeed Range 68 - 169 rpm 68 - 169 rpmSpeed Ratio 0.35 rev/gal 0.090 rev/lRecommended Max 875 psi 6,033 kPaDifferential PressureTorque Ratio 7.60 ft lbs/ psi 1,495 Nm/ kPaTorque at Recommended 6,652 ft lbs 9,018 NmMax DifferentialStall Torque 9,978 ft lbs 13,528 Nm
M6 Motor Specifications Imperial MetricBit Box to Bend - ABH 5.64 ft 1.72 m Bit Box to Bend - FBH 4.71 ft 1.43 mHole Size 7 7/8 - 9 7/8 200 - 250 mmStandard Bit Box Thread 4 1/2 Reg 4 1/2 RegMax WOB 90,200 lbs 40,120 daNMax Pull while back Reaming 85,600 lbs 38,075 daNAbsolute Overpull 780,000 lbs 347,000 daNTool Weight 2400 lbs 1090 kgLength 29.92 ft 9.12 mAdjustable Torque (S22) 35,000 ft lbs 47,450 NmAdjustable Torque (S14) 30,000 ft lbs Left 40,670 Nm LeftStabilizer Torque 12,000 ft lbs 16,300 Nm
6 1/2 165 mm 6/7 - 5 Stage
6.50/6.25 (165/159mm) 6-7 5.0 Stg.
-
4th ED V1.0a
Performance Specifications Imperial MetricFlow Range 200 - 500 gpm 757 - 1,893 lpmSpeed Range 68 - 169 rpm 68 - 169 rpmSpeed Ratio 0.34 rev/gal 0.090 rev/lRecommended Max 1250 psi 8,618 kPaDifferential PressureTorque Ratio 7.61 ft lbs/ psi 1.497 Nm/ kPaTorque at Recommended 9,510 ft lbs 12,896 NmMax DifferentialStall Torque 19,020 ft lbs 25,790 Nm
M6 Motor Specifications Imperial MetricBit Box to Bend - ABH 5.64 ft 1.72 m Bit Box to Bend - FBH 4.71 ft 1.43 mHole Size 7 7/8 - 9 7/8 200 - 250 mmStandard Bit Box Thread 4 1/2 Reg 4 1/2 RegMax WOB 90,200 lbs 40,120 daNMax Pull while back Reaming 85,600 lbs 38,075 daNAbsolute Overpull 780,000 lbs 347,000 daNTool Weight 2400 lbs 1090 kgLength 29.92 ft 9.12 mAdjustable Torque (S22) 35,000 ft lbs 47,450 NmAdjustable Torque (S14) 30,000 ft lbs Left 40,670 Nm LeftStabilizer Torque 12,000 ft lbs 16,300 Nm
6 1/2 165 mm 6/7-5 Stage HR
40
80
120
160
4000(5423)
8000(10 846)
10,000(13 560)
2000(2712)
6000(8135)
650/625 (165/159mm) 6-7 5.0 Stg. HR
DIFFERENTIAL PRESSURE [psi (kPa)]
TORQ
UE
[ft-
lb (N
.m)]
SPEE
D [r
pm
]
1200(8874)
400(2760)
800(5516)
FULLLOAD
TORQ
UE
500 gpm (1890 lpm)
400 gpm(1515 lpm)
300 gpm(1135 lpm)
200 gpm(760 lpm)
-
4th ED V1.0a
Performance Specifications Imperial MetricFlow Range 300 - 600 gpm 1,136 - 2,271 lpmSpeed Range 87 - 174 rpm 87 - 174 rpmSpeed Ratio 0.29 rev/gal 0.077 rev/lRecommended Max 875 psi 6,033 kPaDifferential PressureTorque Ratio 8.32 ft lbs/ psi 1.636 Nm/ kPaTorque at Recommended 7,280 ft lbs 9,870 NmMax DifferentialStall Torque 10,920 ft lbs 14,808 Nm
M6 Motor Specifications Imperial MetricBit Box to Bend - ABH 5.64 ft 1.72 m Bit Box to Bend - FBH 4.71 ft 1.43 mHole Size 7 7/8 - 9 7/8 200 - 250 mmStandard Bit Box Thread 4 1/2 Reg 4 1/2 RegMax WOB 90,200 lbs 40,120 daNMax Pull while back Reaming 85,600 lbs 38,075 daNAbsolute Overpull 780,000 lbs 347,000 daNTool Weight 2390 lbs 1080 kgLength 29.75 ft 9.07 mAdjustable Torque (S22) 35,000 ft lbs 47,450 NmAdjustable Torque (S14) 30,000 ft lbs Left 40,670 Nm LeftStabilizer Torque 12,000 ft lbs 16,300 Nm
6 1/2 165 mm 6/7 - 5 Stage
6.50/6.75 (165/171 mm) 6-7 5 Stg.
-
4th ED V1.0a
Performance Specifications Imperial MetricFlow Range 300 - 600 gpm 1,136 - 2,271 lpmSpeed Range 87 - 174 rpm 87 - 174 rpmSpeed Ratio 0.29 rev/gal 0.077 rev/lRecommended Max 1250 psi 8,618 kPaDifferential PressureTorque Ratio 8.32 ft lbs/ psi 1.636 Nm/ kPaTorque at Recommended 10,400 ft lbs 14.100 NmMax DifferentialStall Torque 20,800 ft lbs 28,200 Nm
M6 Motor Specifications Imperial MetricBit Box to Bend - ABH 5.64 ft 1.72 m Bit Box to Bend - FBH 4.71 ft 1.43 mHole Size 7 7/8 - 9 7/8 200 - 250 mmStandard Bit Box Thread 4 1/2 Reg 4 1/2 RegMax WOB 90,200 lbs 40,120 daNMax Pull while back Reaming 85,600 lbs 38,075 daNAbsolute Overpull 780,000 lbs 347,000 daNTool Weight 2390 lbs 1080 kgLength 29.75 ft 9.07 mAdjustable Torque (S22) 35,000 ft lbs 47,450 NmAdjustable Torque (S14) 30,000 ft lbs Left 40,670 Nm LeftStabilizer Torque 12,000 ft lbs 16,300 Nm
6 1/2 165 mm 6/7 - 5 Stage HR
40
80
120
160
200
2000(2712)
4000(5423)
6000(8135)
8000(10 846)
10000(13 560)
12000(16 270)
6.50/6.75 (165/171mm) 6-7 5.0 Stg. HR
DIFFERENTIAL PRESSURE [psi (kPa)]
TORQ
UE
[ft-
lb (N
.m)]
SPEE
D [r
pm
]
600 gpm(2270 lpm)
400 gpm(1515 lpm)
500 gpm(1890 lpm)
300 gpm(1135 lpm)
400(2760)
800(5516)
1200(8874)
FULLLOAD
TORQ
UE
-
4th ED V1.0a
Performance Specifications Imperial MetricFlow Range 300 - 600 gpm 1,136 - 2,271 lpmSpeed Range 34 - 69 rpm 34 - 69 rpmSpeed Ratio 0.11 rev/gal 0.029 rev/lRecommended Max 368 psi 2,537 kPaDifferential PressureTorque Ratio 18.33 ft lbs/ psi 3.605 Nm/ kPaTorque at Recommended 6,745 ft lbs 9,145 NmMax DifferentialStall Torque 10,117 ft lbs 13,717 Nm
M6 Motor Specifications Imperial MetricBit Box to Bend - ABH 5.64 ft 1.72 m Bit Box to Bend - FBH 4.71 ft 1.43 mHole Size 7 7/8 - 9 7/8 200 - 251 mmStandard Bit Box Thread 4 1/2 Reg 4 1/2 RegMax WOB 90,200 lbs 40,120 daNMax Pull while back Reaming 85,600 lbs 38,075 daNAbsolute Overpull 780,000 lbs 347,000 daNTool Weight 2570 lbs 1170 kgLength 32.08 ft 9.78 mAdjustable Torque (S22) 35,000 ft lbs 47,450 NmAdjustable Torque (S14) 30,000 ft lbs Left 40,670 Nm LeftStabilizer Torque 12,000 ft lbs 16,300 Nm
6 1/2 165 mm 7/8 - 2.1 Stage
6.50/6.75 (165/171 mm 7-8 2.1 Stg.
-
4th ED V1.0a
Performance Specifications Imperial MetricFlow Range 300 - 600 gpm 1,140 - 2,270 lpmSpeed Range 34 - 69 rpm 34 - 69 rpmSpeed Ratio 0.11 rev/gal 0.029 rev/lRecommended Max 525 psi 3,620 kPaDifferential PressureTorque Ratio 18.37 ft lbs/ psi 3.61 Nm/ kPaTorque at Recommended 9,645 ft lbs 13,077 NmMax DifferentialStall Torque 19,290 ft lbs 26,150 Nm
M6 Motor Specifications Imperial MetricBit Box to Bend - ABH 5.64 ft 1.72 m Bit Box to Bend - FBH 4.71 ft 1.43 mHole Size 7 7/8 - 9 7/8 200 - 251 mmStandard Bit Box Thread 4 1/2 Reg 4 1/2 RegMax WOB 90,200 lbs 40,120 daNMax Pull while back Reaming 85,600 lbs 38,075 daNAbsolute Overpull 780,000 lbs 347,000 daNTool Weight 2570 lbs 1170 kgLength 32.08 ft 9.78 mAdjustable Torque (S22) 35,000 ft lbs 47,450 NmAdjustable Torque (S14) 30,000 ft lbs Left 40,670 Nm LeftStabilizer Torque 12,000 ft lbs 16,300 Nm
6 1/2 165 mm 7/8 - 2.1 Stg. HR
20
40
60
80
2000(2710)
6000(8130)
10,000(13 560)
650/675 (165/171mm) 7-8 2.1 Stg. HR
DIFFERENTIAL PRESSURE [psi (kPa)]
TOR
QU
E [f
t-lb
(N.m
)]
SPEE
D [r
pm
]
100(690)
300(2070)
500(3450)
FULLLOAD
600 gpm(2270 lpm)
500 gpm(1890 lpm)
300 gpm(1135 lpm)
400 gpm(1515 lpm)
TORQ
UE
-
4th ED V1.0a
Performance Specifications Imperial MetricFlow Range 300 - 600 gpm 1,136 - 2,271 lpmSpeed Range 59 - 118 rpm 59 - 118 rpmSpeed Ratio 0.20 rev/gal 0.053 rev/lRecommended Max 525 psi 3,620 kPaDifferential PressureTorque Ratio 12.44 ft lbs/ psi 2.446 Nm/ kPaTorque at Recommended 6,531 ft lbs 8,855 NmMax DifferentialStall Torque 9,797 ft lbs 13,282 Nm
M6 Motor Specifications Imperial MetricBit Box to Bend - ABH 5.64 ft 1.72 m Bit Box to Bend - FBH 4.71 ft 1.43 mHole Size 7 7/8 - 9 7/8 200 - 250 mmStandard Bit Box Thread 4 1/2 Reg 4 1/2 RegMax WOB 90,200 lbs 40,120 daNMax Pull while back Reaming 85,600 lbs 38,075 daNAbsolute Overpull 780,000 lbs 347,000 daNTool Weight 2360 lbs 1070 kgLength 29.50 ft 8.99 mAdjustable Torque (S22) 35,000 ft lbs 47,450 NmAdjustable Torque (S14) 30,000 ft lbs Left 40,670 Nm LeftStabilizer Torque 12,000 ft lbs 16,300 Nm
6 1/2 165 mm 7/8 - 3 Stg. Slow
DIFFERENTIAL PRESSURE
6.50/6.25 (165/159mm) 7-8 3 Stg. Slo
-
4th ED V1.0a
Performance Specifications Imperial MetricFlow Range 300 - 600 gpm 1,136 - 2,271 lpmSpeed Range 59 - 118 rpm 59 - 118 rpmSpeed Ratio 0.20 rev/gal 0.053 rev/lRecommended Max 735 psi 5068 kPaDifferential PressureTorque Ratio 12.44 ft lbs/ psi 2.446 Nm/ kPaTorque at Recommended 9143 ft lbs 12,398 NmMax DifferentialStall Torque 18,286 ft lbs 24,796 Nm
M6 Motor Specifications Imperial MetricBit Box to Bend - ABH 5.64 ft 1.72 m Bit Box to Bend - FBH 4.71 ft 1.43 mHole Size 7 7/8 - 9 7/8 200 - 250 mmStandard Bit Box Thread 4 1/2 Reg 4 1/2 RegMax WOB 90,200 lbs 40,120 daNMax Pull while back Reaming 85,600 lbs 38,075 daNAbsolute Overpull 780,000 lbs 347,000 daNTool Weight 2360 lbs 1070 kgLength 29.50 ft 8.99 mAdjustable Torque (S22) 35,000 ft lbs 47,450 NmAdjustable Torque (S14) 30,000 ft lbs Left 40,670 Nm LeftStabilizer Torque 12,000 ft lbs 16,300 Nm
6 1/2 165 mm 7/8-3 Stg. Slo HR
40
80
120
TORQ
UE
[ft-
lb (N
.m)]
SPEE
D [r
pm
]
600(4140)
400(2760)
200(1380)
DIFFERENTIAL PRESSURE [psi (kPa)]
4000(5425)
6000(8135)
2000(2710)
8000(10 846)
10,000(13 560)
6.50/6.25 (165/159mm) 7-8 3 Stg. Slo HR
TORQ
UE
FULLLOAD
300 gpm(1135 lpm)
400 gpm(1515 lpm)
500 gpm(1890 lpm)
600 gpm(2270 lpm)
-
4th ED V1.0a
Performance Specifications Imperial MetricFlow Range 200 - 600 gpm 757 - 2,271 lpmSpeed Range 30 - 90 rpm 30 - 90 rpmSpeed Ratio 0.15 rev/gal 0.040 rev/lRecommended Max 525 psi 3,620 kPaDifferential PressureTorque Ratio 17.02 ft lbs/ psi 3.348 Nm/ kPaTorque at Recommended 8,937 ft lbs 12,117 NmMax DifferentialStall Torque 13,406 ft lbs 18,175 Nm
M6 Motor Specifications Imperial MetricBit Box to Bend - ABH 5.64 ft 1.72 m Bit Box to Bend - FBH 4.71 ft 1.43 mHole Size 7 7/8 - 9 7/8 200 - 250 mmStandard Bit Box Thread 4 1/2 Reg 4 1/2 RegMax WOB 90,200 lbs 40,120 daNMax Pull while back Reaming 85,600 lbs 38,075 daNAbsolute Overpull 780,000 lbs 347,000 daNTool Weight 2400 lbs 1090 kgLength 29.92 ft 9.12 mAdjustable Torque (S22) 35,000 ft lbs 47,450 NmAdjustable Torque (S14) 30,000 ft lbs Left 40,670 Nm LeftStabilizer Torque 12,000 ft lbs 106,300 Nm
6 1/2 165 mm 7/8 - 3 Stage Slow
6.50/6.75 (165/171mm) 7-8 3 Stg. Slow
-
4th ED V1.0a
Performance Specifications Imperial MetricFlow Range 300 - 600 gpm 1136 - 2271 lpmSpeed Range 40 - 90 rpm 40 - 90 rpmSpeed Ratio 0.15 rev/gal 0.040 rev/lRecommended Max 750 psi 5,171 kPaDifferential PressureTorque Ratio 17.04 ft lbs/ psi 3.351 Nm/ kPaTorque at Recommended 12,780 ft lbs 17,327 NmMax DifferentialStall Torque 25,560 ft lbs 34,654 Nm
M6 Motor Specifications Imperial MetricBit Box to Bend - ABH 5.64 ft 1.72 m Bit Box to Bend - FBH 4.71 ft 1.43 mHole Size 7 7/8 - 9 7/8 200 - 250 mmStandard Bit Box Thread 4 1/2 Reg 4 1/2 RegMax WOB 90,200 lbs 40,120 daNMax Pull while back Reaming 85,600 lbs 38,075 daNAbsolute Overpull 780,000 lbs 347,000 daNTool Weight 2400 lbs 1090 kgLength 29.92 ft 9.12 mAdjustable Torque (S22) 35,000 ft lbs 47,450 NmAdjustable Torque (S14) 30,000 ft lbs Left 40,670 Nm LeftStabilizer Torque 12,000 ft lbs 106,300 Nm
6 1/2 165 mm 7/8-3 Stage Slo HR
20
40
60
80
14,000(18 980)
6.50/6.75 (165/171mm) 7-8 3 Slo HR
DIFFERENTIAL PRESSURE [psi (kPa)]
TORQ
UE
[ft-
lb (N
.m)]
SPEE
D [r
pm
]
400 gpm(1515 lpm)
500 gpm(1890 lpm)
600 gpm(2270 lpm)
400(2760)
300 gpm(1135 lpm)
200(1380)
600(4140)
FULLLOAD
TORQ
UE
2000(2712)
6000(8135)
10,000(13 560)
-
4th ED V1.0a
Performance Specifications Imperial MetricFlow Range 150 - 500 gpm 568 - 1,893 lpmSpeed Range 53 - 176 rpm 53 - 176 rpmSpeed Ratio 0.35 rev/gal 0.092 rev/lRecommended Max 700 psi 4,826 kPaDifferential PressureTorque Ratio 7.39 ft lbs/ psi 1.453 Nm/ kPaTorque at Recommended 5,170 ft lbs 7,010 NmMax DifferentialStall Torque 7,756 ft lbs 10,515 Nm
M6 Motor Specifications Imperial MetricBit Box to Bend - ABH 5.64 ft 1.72 m Bit Box to Bend - FBH 4.71 ft 1.43 mHole Size 7 7/8 - 9 7/8 200 - 250 mmStandard Bit Box Thread 4 1/2 Reg 4 1/2 RegMax WOB 90,200 lbs 40,120 daNMax Pull while back Reaming 85,600 lbs 38,075 daNAbsolute Overpull 780,000 lbs 347,000 daNTool Weight 2090 lbs 950 kgLength 26.08 ft 7.95 mAdjustable Torque (S22) 35,000 ft lbs 47,450 NmAdjustable Torque (S14) 30,000 ft lbs Left 40,670 Nm LeftStabilizer Torque 12,000 ft lbs 16,300 Nm
6 1/2 165 mm 7/8 - 4 Stage
-
4th ED V1.0a
Performance Specifications Imperial MetricFlow Range 200 - 600 gpm 757 - 2271 lpmSpeed Range 70 - 211 rpm 70 - 211 rpmSpeed Ratio 0.35 rev/gal 0.092 rev/lRecommended Max 1,000 psi 6,895 kPaDifferential PressureTorque Ratio 7.40 ft lbs/ psi 1.455 Nm/ kPaTorque at Recommended 7,400 ft lbs 10,233 NmMax DifferentialStall Torque 11,100 ft lbs 15,049 Nm
M6 Motor Specifications Imperial MetricBit Box to Bend - ABH 5.64 ft 1.72 m Bit Box to Bend - FBH 4.71 ft 1.43 mHole Size 7 7/8 - 9 7/8 200 - 250 mmStandard Bit Box Thread 4 1/2 Reg 4 1/2 RegMax WOB 90,200 lbs 40,120 daNMax Pull while back Reaming 85,600 lbs 38,075 daNAbsolute Overpull 780,000 lbs 347,000 daNTool Weight 2090 lbs 950 kgLength 26.08 ft 7.95 mAdjustable Torque (S22) 35,000 ft lbs 47,450 NmAdjustable Torque (S14) 30,000 ft lbs Left 40,670 Nm LeftStabilizer Torque 12,000 ft lbs 16,300 Nm
6 1/2 165 mm 7/8 - 4 Stage HR
50
100
150
200
2000(2712)
4000(5423)
6000(8135)
8000(10 846)
6.50 (165mm) 7-8 4.0 Stg. HR
DIFFERENTIAL PRESSURE [psi (kPa)]
TORQ
UE
[ft-
lb (N
.m)]
SPEE
D [r
pm
]
600 gpm(2270 lpm)
TORQ
UE
FULLLOAD
467 gpm(1768 lpm)
333 gpm(1261 lpm)
200 gpm(757 lpm)
200(1380)
600(4140)
1000(6895)
-
4th ED V1.0a
Performance Specifications Imperial MetricFlow Range 200 - 500 gpm 757 - 1,893 lpmSpeed Range 64 - 161 rpm 64 - 161 rpmSpeed Ratio 0.320 rev/gal 0.085 rev/lRecommended Max 840 psi 5,792 kPaDifferential PressureTorque Ratio 8.11 ft lbs/ psi 1.595 Nm/ kPaTorque at Recommended 6,810 ft lbs 9,233 NmMax DifferentialStall Torque 10,215 ft lbs 13,850 Nm
M6 Motor Specifications Imperial MetricBit Box to Bend - ABH 5.64 ft 1.72 m Bit Box to Bend - FBH 4.71 ft 1.43 mHole Size 7 7/8 - 9 7/8 200 - 250 mmStandard Bit Box Thread 4 1/2 Reg 4 1/2 RegMax WOB 90,200 lbs 40,120 daNMax Pull while back Reaming 85,600 lbs 38,075 daNAbsolute Overpull 780,000 lbs 347,000 daNTool Weight 2390 lbs 1080 kgLength 29.75 ft 9.07 mAdjustable Torque (S22) 35,000 ft lbs 47,450 NmAdjustable Torque (S14) 30,000 ft lbs Left 40,670 Nm LeftStabilizer Torque 12,000 ft lbs 16,300 Nm
6 1/2 165 mm 7/8 - 4.8 Stage
-
4th ED V1.0a
Performance Specifications Imperial MetricFlow Range 200 - 500 gpm 757 - 1,893 lpmSpeed Range 64 - 161 rpm 64 - 161 rpmSpeed Ratio 0.320 rev/gal 0.085 rev/lRecommended Max 1,200 psi 8,274 kPaDifferential PressureTorque Ratio 8.11 ft lbs/ psi 1.595 Nm/ kPaTorque at Recommended 9,738 ft lbs 13 203 NmMax DifferentialStall Torque 14,607 ft lbs 19,804 Nm
M6 Motor Specifications Imperial MetricBit Box to Bend - ABH 5.64 ft 1.72 m Bit Box to Bend - FBH 4.71 ft 1.43 mHole Size 7 7/8 - 9 7/8 200 - 250 mmStandard Bit Box Thread 4 1/2 Reg 4 1/2 RegMax WOB 90,200 lbs 40,120 daNMax Pull while back Reaming 85,600 lbs 38,075 daNAbsolute Overpull 780,000 lbs 347,000 daNTool Weight 2390 lbs 1080 kgLength 29.75 ft 9.07 mAdjustable Torque (S22) 35,000 ft lbs 47,450 NmAdjustable Torque (S14) 30,000 ft lbs Left 40,670 Nm LeftStabilizer Torque 12,000 ft lbs 16,300 Nm
6 1/2 165 mm 7/8 -4.8 Stg. HR
40
80
120
160
2000(2712)
4000(5423)
6000(8125)
8000(10 846)
10,000(13 560)
12,000(16 270)
6.50 (165 mm) 7-8 4.8 Stg. HR
DIFFERENTIAL PRESSURE [psi (kPa)]
TORQ
UE
[ft-
lb (N
.m)]
SPEE
D [r
pm
]
200 gpm(755 lpm)
350 gpm(1325 lpm)
500 gpm(1890 lpm)
FULLLOAD
1200(8874)
800(5516)
400(2760)
TORQ
UE
-
4th ED V1.0a
Performance Specifications Imperial MetricFlow Range 300 - 600 gpm 1140 - 2270 lpmSpeed Range 86 - 180 rpm 86 - 180 rpmSpeed Ratio 0.288 rev/gal 0.076 rev/lRecommended Max 1,130 psi 7,760 kPaDifferential PressureTorque Ratio 9.30 ft lbs/ psi 1.829 Nm/ kPaTorque at Recommended 10,460 ft lbs 14,190 NmMax DifferentialStall Torque 15,690 ft lbs 21,280 Nm
M6 Motor Specifications Imperial MetricBit Box to Bend - ABH 5.64 ft 1.72 m Bit Box to Bend - FBH 4.71 ft 1.43 mHole Size 7 7/8 - 9 7/8 200 - 250 mmStandard Bit Box Thread 4 1/2 Reg 4 1/2 RegMax WOB 90,200 lbs 40,120 daNMax Pull while back Reaming 85,600 lbs 38,075 daNAbsolute Overpull 780,000 lbs 347,000 daNTool Weight 2340 lbs 1065 kgLength 29.25 ft 8.92 mAdjustable Torque (S22) 35,000 ft lbs 47,450 NmAdjustable Torque (S14) 30,000 ft lbs Left 40,670 Nm LeftStabilizer Torque 12,000 ft lbs 16,300 Nm
6 1/2 165 mm 7/8-5 Stage HR
40
80
120
160
6.50 (165mm) 7-8 5.0 Stg. HR
DIFFERENTIAL PRESSURE [psi (kPa)]
TORQ
UE
[ft-
lb (N
.m)]
SPEE
D [r
pm
]
200(1380)
600(4140)
1000(6895)
600 gpm(2270 lpm)
450 gpm(1705 lpm)
300 gpm(1135 lpm)
TORQ
UE
FULLLOAD
6000(8135)
3000(4070)
12,000(16 270)
9000(12 205)
-
4th ED V1.0a
Performance Specifications Imperial MetricFlow Range 300 - 600 gpm 1,136 - 2,271 lpmSpeed Range 78 - 157 rpm 78 - 157 rpmSpeed Ratio 0.26 rev/gal 0.069 rev/lRecommended Max 1,050 psi 7,239 kPaDifferential PressureTorque Ratio 9.07 ft lbs/ psi 1.784 Nm/ kPaTorque at Recommended 9,525 ft lbs 12,915 NmMax DifferentialStall Torque 14,288 ft lbs 19,375 Nm
M6 Motor Specifications Imperial MetricBit Box to Bend - ABH 5.64 ft 1.72 m Bit Box to Bend - FBH 4.71 ft 1.43 mHole Size 7 7/8 - 9 7/8 200 - 250 mmStandard Bit Box Thread 4 1/2 Reg 4 1/2 RegMax WOB 90,200 lbs 40,120 daNMax Pull while back Reaming 85,600 lbs 38,075 daNAbsolute Overpull 780,000 lbs 347,000 daNTool Weight 2570 lbs 1170 kgLength 32.08 ft 9.78 mAdjustable Torque (S22) 35,000 ft lbs 47,450 NmAdjustable Torque (S14) 30,000 ft lbs Left 40,670 Nm LeftStabilizer Torque 12,000 ft lbs 16,300 Nm
6 1/2 165 mm 7/8 - 6 Stage
6.50/6.75 (165/171 mm) 7-8 6 Stg.
-
4th ED V1.0a
Performance Specifications Imperial MetricFlow Range 300 - 600 gpm 1,140 - 2,270 lpmSpeed Range 78 - 157 rpm 78 - 157 rpmSpeed Ratio 0.26 rev/gal 0.069 rev/lRecommended Max 1500 psi 10,340 kPaDifferential PressureTorque Ratio 9.07 ft lbs/ psi 1.78 Nm/ kPaTorque at Recommended 13,600 ft lbs 18,450 NmMax DifferentialStall Torque 27,200 ft lbs 36,900 Nm
M6 Motor Specifications Imperial MetricBit Box to Bend - ABH 5.64 ft 1.72 m Bit Box to Bend - FBH 4.71 ft 1.43 mHole Size 7 7/8 - 9 7/8 200 - 251 mmStandard Bit Box Thread 4 1/2 Reg 4 1/2 RegMax WOB 90,200 lbs 40,120 daNMax Pull while back Reaming 85,600 lbs 38,075 daNAbsolute Overpull 780,000 lbs 347,000 daNTool Weight 2570 lbs 1170 kgLength 32.08 ft 9.78 mAdjustable Torque (S22) 35,000 ft lbs 47,450 NmAdjustable Torque (S14) 30,000 ft lbs Left 40,670 Nm LeftStabilizer Torque 12,000 ft lbs 16,300 Nm
6 1/2 165 mm 7/8 - 6.0 Stg. HR
40
80
120
160
4000(5423)
8000(10 846)
12,000(16 270)
16,000(21 693)
650/675 (165/171mm) 7-8 6.0 Stage HR
DIFFERENTIAL PRESSURE [psi (kPa)]
TOR
QU
E[f
t-lb
(N.m
)]
SPEE
D [r
pm
]
200(1380)
FULLLOAD
TORQ
UE
600 gpm(2270 lpm)
500 gpm(1890 lpm)
400 gpm(1515 lpm)
300 gpm(1135 lpm)
600(4140)
1000(6890)
1400(9650)
-
4th ED V1.0a
Performance Specifications Imperial MetricFlow Range 350 - 625 gpm 1,325 - 2,366 lpmSpeed Range 53 - 94 rpm 53 - 94 rpmSpeed Ratio 0.15 rev/gal 0.040 rev/lRecommended Max 619 psi 4,268 kPaDifferential PressureTorque Ratio 17.36 ft lbs/ psi 3.414 Nm/ kPaTorque at Recommended 10,752 ft lbs 14,577 NmMax DifferentialStall Torque 16,128 ft lbs 21,866 Nm
M6 Motor Specifications Imperial MetricBit Box to Bend - ABH 5.64 ft 1.72 m Bit Box to Bend - FBH 4.71 ft 1.43 mHole Size 7 7/8 - 9 7/8 200 - 250 mmStandard Bit Box Thread 4 1/2 Reg 4 1/2 RegMax WOB 90,200 lbs 40,120 daNMax Pull while back Reaming 85,600 lbs 38,075 daNAbsolute Overpull 780,000 lbs 347,000 daNTool Weight 2570 lbs 1170 kgLength 32.08 ft 9.78 mAdjustable Torque (S22) 35,000 ft lbs 47,450 NmAdjustable Torque (S14) 30,000 ft lbs Left 40,670 Nm LeftStabilizer Torque 12,000 ft lbs 16,300 Nm
6 1/2 165 mm 9/10 - 3.5 Stage
1900
6.50/6.75 (165/171mm) 9-10 3.5 Stg.
-
4th ED V1.0a
Performance Specifications Imperial MetricFlow Range 300 - 900 gpm 1,136 - 3,407 lpmSpeed Range 22 - 66 rpm 22 - 66 rpmSpeed Ratio 0.07 rev/gal 0.018 rev/lRecommended Max 438 psi 3,020 kPaDifferential PressureTorque Ratio 29.26 ft lbs/ psi 5.754 Nm/ kPaTorque at Recommended 12,816 ft lbs 17,376 NmMax DifferentialStall Torque 19,224 ft lbs 26,064 Nm
M6 Motor Specifications Imperial MetricBit Box to Bend - ABH 6.65 ft 2.03 mHole Size 9 5/8 - 12 245 - 311 mmStandard Bit Box Thread 6 5/8 Reg 6 5/8 RegMax WOB 87,360 lbs 38,860 daNMax Pull while back Reaming 145,600 lbs 64,760 daNAbsolute Overpull 908,350 lbs 404,030 daNTool Weight 3990 lbs 1810 kgLength 35.56 ft 10.84 mAdjustable Torque (S22) 40,000 ft lbs 54,200 NmStabilizer Torque 35,000 ft lbs 47,400 Nm
7 3/4 197mm 7/8-2.5 Stg. Slow
7.75/8.00 (197/203mm) 7-8 2.5 Stg.
-
4th ED V1.0a
Performance Specifications Imperial MetricFlow Range 300 - 900 gpm 1,136 - 3,407 lpmSpeed Range 22 - 66 rpm 22 - 66 rpmSpeed Ratio 0.07 rev/gal 0.018 rev/lRecommended Max 625 psi 4,309 kPaDifferential PressureTorque Ratio 29.30 ft lbs/ psi 5.763 Nm/ kPaTorque at Recommended 18,314 ft lbs 24,830 NmMax DifferentialStall Torque 36,628 ft lbs 49,660 Nm
M6 Motor Specifications Imperial MetricBit Box to Bend - ABH 6.65 ft 2.03 mHole Size 9 5/8 - 12 245 - 311 mmStandard Bit Box Thread 6 5/8 Reg 6 5/8 RegMax WOB 87,360 lbs 38,860 daNMax Pull while back Reaming 145,600 lbs 64,760 daNAbsolute Overpull 908,350 lbs 404,030 daNTool Weight 3990 lbs 1810 kgLength 35.56 ft 10.84 mAdjustable Torque (S22) 40,000 ft lbs 54,200 NmStabilizer Torque 35,000 ft lbs 47,400 Nm
7 3/4 197mm 7/8-2.5 Slow HR
4000(5425)
8000(10 850)
12,000(16 275)
16,000(21 690)
20,000(27 116)
20
40
60
200(1380)
400(2760)
600(4140)
7.75/8.00 (197/203mm) 7-8 2.5 Slo HR
SPEE
D [r
pm
]
DIFFERENTIAL PRESSURE [psi (kPa)]
TORQ
UE
[ft-
lb (N
.m)]
300 gpm(1136 lpm)
600 gpm(2271 lpm)
900 gpm (3407 lpm)
FULLLOAD
TORQ
UE
-
4th ED V1.0a
Performance Specifications Imperial MetricFlow Range 300 - 900 gpm 1,136 - 3,407 lpmSpeed Range 51 - 153 rpm 51 - 153 rpmSpeed Ratio 0.17 rev/gal 0.045 rev/lRecommended Max 525 psi 3,620 kPaDifferential PressureTorque Ratio 14.38 ft lbs/ psi 2.828 Nm/ kPaTorque at Recommended 7,550 ft lbs 10,236 NmMax DifferentialStall Torque 11,325 ft lbs 15,354 Nm
M6 Motor Specifications Imperial MetricBit Box to Bend - ABH 6.65 ft 2.03 mHole Size 9 5/8 - 12 245 - 311 mmStandard Bit Box Thread 6 5/8 Reg 6 5/8 RegMax WOB 87,360 lbs 38,860 daNMax Pull while back Reaming 145,600 lbs 64,760 daNAbsolute Overpull 908,350 lbs 404,030 daNTool Weight 3115 lbs 1410 kgLength 27.73 ft 8.45 mAdjustable Torque (S22) 40,000 ft lbs 54,200 NmStabilizer Torque 35,000 ft lbs 47,400 Nm
7 3/4 197 mm 7/8 - 3 Stage
7.75/8.00 (197/203mm) 7-8 3 Stg.
-
4th ED V1.0a
Performance Specifications Imperial MetricFlow Range 300 - 900 gpm 1,136 - 3,407 lpmSpeed Range 48 - 143 rpm 48 - 143 rpmSpeed Ratio 0.16 rev/gal 0.042 rev/lRecommended Max 700 psi 4,826 kPaDifferential PressureTorque Ratio 16.38 ft lbs/ psi 3.222 Nm/ kPaTorque at Recommended 11,469 ft lbs 15,549 NmMax DifferentialStall Torque 17,203 ft lbs 23,324 Nm
M6 Motor Specifications Imperial MetricBit Box to Bend - ABH 6.65 ft 2.03 mHole Size 9 5/8 - 12 245 - 311 mmStandard Bit Box Thread 6 5/8 Reg 6 5/8 RegMax WOB 87,360 lbs 38,860 daNMax Pull while back Reaming 145,600 lbs 64,760 daNAbsolute Overpull 908,350 lbs 404,030 daNTool Weight 3550 lbs 1610 kgLength 31.56 ft 9.62 mAdjustable Torque (S22) 40,000 ft lbs 54,200 NmStabilizer Torque 35,000 ft lbs 47,400 Nm
7 3/4 197 mm 7/8 - 4 Stage
7.75/8.00 (197/203mm) 7-8 4 Stg.
-
4th ED V1.0a
Performance Specifications Imperial MetricFlow Range 400 - 900 gpm 1,515 - 3,407 lpmSpeed Range 66 - 149 rpm 66 - 149 rpmSpeed Ratio 0.166 rev/gal 0.044 rev/lRecommended Max 900 psi 6,206 kPaDifferential PressureTorque Ratio 16.589 ft lbs/ psi 3.265 Nm/ kPaTorque at Recommended 14,940 ft lbs 20,259 NmMax DifferentialStall Torque 22,400 ft lbs 30,374 Nm
M6 Motor Specifications Imperial MetricBit Box to Bend - ABH 6.65 ft 2.03 mHole Size 9 5/8 - 12 245 - 311 mmStandard Bit Box Thread 6 5/8 Reg 6 5/8 RegMax WOB 87,360 lbs 38,860 daNMax Pull while back Reaming 145,600 lbs 64,760 daNAbsolute Overpull 908,350 lbs 404,030 daNTool Weight 3550 lbs 1610 kgLength 31.56 ft 9.62 mAdjustable Torque (S22) 40,000 ft lbs 54,200 NmStabilizer Torque 35,000 ft lbs 47,400 Nm
7 3/4 197 mm 7/8 - 4 Stg. HR
DIFFERENTIAL PRESSURE [psi (kPa)]
TORQ
UE
[ft-
lb (N
.m)]
7.75/8.00 (197/203mm) 7-8 4.0 Stg. HR
600(4137)
400(2760)
12,000(16 270)
16,000(21 693)
4000(5423)
8000(10 846)
400 gpm(1515 lpm)
650 gpm(2460 lpm)
900 gpm (3407 lpm)
800(5516)
200(1380)
FULLLOAD
TORQ
UE
40
80
120
SPEE
D [r
pm
]
-
4th ED V1.0a
Performance Specifications Imperial MetricFlow Range 300 - 900 gpm 1,136 - 3,407 lpmSpeed Range 65 - 196 rpm 65 - 196 rpmSpeed Ratio 0.22 rev/gal 0.058 rev/lRecommended Max 1,050 psi 7,239 kPaDifferential PressureTorque Ratio 11.95 ft lbs/ psi 2.350 Nm/ kPaTorque at Recommended 12,548 ft lbs 17,012 NmMax DifferentialStall Torque 18,821 ft lbs 25,518 Nm
M6 Motor Specifications Imperial MetricBit Box to Bend - ABH 6.65 ft 2.03 mHole Size 9 5/8 - 12 245 - 311 mmStandard Bit Box Thread 6 5/8 Reg 6 5/8 RegMax WOB 87,360 lbs 38,860 daNMax Pull while back Reaming 145,600 lbs 64,760 daNAbsolute Overpull 908,350 lbs 404,030 daNTool Weight 3550 lbs 1610 kgLength 31.56 ft 9.62 mAdjustable Torque (S22) 40,000 ft lbs 54,200 NmStabilizer Torque 35,000 ft lbs 47,400 Nm
7 3/4 197 mm 8/9 - 6 Stage
7.75/8.00 (197/203mm) 8-9 6 Stg.
-
4th ED V1.0a
Performance Specifications Imperial MetricFlow Range 300 - 900 gpm 1,136 - 3,407 lpmSpeed Range 79 - 237 rpm 79 - 237 rpmSpeed Ratio 0.26 rev/gal 0.069 rev/lRecommended Max 1,050 psi 7,239 kPaDifferential PressureTorque Ratio 9.93 ft lbs/ psi 1.953 Nm/ kPaTorque at Recommended 10,427 ft lbs 14,137 NmMax DifferentialStall Torque 15,641 ft lbs 21,206 Nm
M6 Motor Specifications Imperial MetricBit Box to Bend - ABH 6.68 ft 2.04 mHole Size 9 5/8 - 12 245 - 311 mmStandard Bit Box Thread 6 5/8 Reg 6 5/8 RegMax WOB 105,000 lbs 46,700 daNMax Pull while back Reaming 175,000 lbs 77,800 daNAbsolute Overpull 1,116,000 lbs 496,400 daNTool Weight 3810 lbs 1730 kgLength 31.67 ft 9.65 mAdjustable Torque (S22) 45,000 ft lbs 61,000 NmAdjustable Torque (S14) 40,000 ft lbs Left 54,200 Nm LeftStabilizer Torque 40,000 ft lbs 54,200 Nm
8 203 mm 6/7 - 6 Stage
-
4th ED V1.0a
Performance Specifications Imperial MetricFlow Range 300 - 900 gpm 1,136 - 3,407 lpmSpeed Range 22 - 66 rpm 22 - 66 rpmSpeed Ratio 0.07 rev/gal 0.018 rev/lRecommended Max 438 psi 3,020 kPaDifferential PressureTorque Ratio 29.26 ft lbs/ psi 5.754 Nm/ kPaTorque at Recommended 12,816 ft lbs 17,376 NmMax DifferentialStall Torque 19,224 ft lbs 26,064 Nm
M6 Motor Specifications Imperial MetricBit Box to Bend - ABH 6.68 ft 2.04 mHole Size 9 5/8 - 12 245 - 311 mmStandard Bit Box Thread 6 5/8 Reg 6 5/8 RegMax WOB 105,000 lbs 46,700 daNMax Pull while back Reaming 175,000 lbs 77,800 daNAbsolute Overpull 1,116,000 lbs 496,400 daNTool Weight 4290 lbs 1945 kgLength 35.67 ft 10.87 mAdjustable Torque (S22) 45,000 ft lbs 61,000 NmAdjustable Torque (S14) 40,000 ft lbs Left 54,200 Nm LeftStabilizer Torque 40,000 ft lbs 54,200 Nm
8 203 mm 7/8 - 2.5 Stage Slow
7.75/8.00 (197/203mm) 7-8 2.5 Stg.
-
4th ED V1.0a
Performance Specifications Imperial MetricFlow Range 300 - 900 gpm 1,136 - 3,407 lpmSpeed Range 51 - 153 rpm 51 - 153 rpmSpeed Ratio 0.17 rev/gal 0.045 rev/l