www.simtekfence.com simtek fence. about us founded in 2007, simtek fence has reinvented fence...
TRANSCRIPT
www.simtekfence.comwww.simtekfence.com
SimTek Fence
Abou
t Us
Founded in 2007, SimTek Fence has reinvented fence manufacturing with its patented design of rotationally-molded fencing allowing realistic stone appearance and superior performance. We are one of the fastest growing fence manufacturer in the United States
Pate
nted
Con
stru
ction
Every panel and post is manufactured by using rotational mold technology.
Pate
nted
Con
stru
ction
Our fence system is made with proprietary Linear Low Density Polyethylene Plastic (LLDPE) and is reinforced with galvanized steel.
17 High Strength gauge 1 ½” squared galvanized
steel tube
Supe
rior W
ind
Load
Rati
ng
SimTek Fence has been engineered to meet and exceed the wind load requirements for Miami-Dade County for hurricane force wind loads.
- 110 mph sustained wind loads with a maximum burst of 130 mph.
SimTek FenceEx
celle
nt S
ound
Bar
rier
SimTek fence blocks 98% of direct sound
Our Sound Transmission Class Rating is (STC) is 26
Fade
Res
ista
nt
SimTek fence contains UV-12 inhibitors that allows the plastic to maintain its original granite color.
The fence will not fade or ever change colors.
our new √ green
(formula)
Gre
ener
Sol
ution
SimTek Fence uses more than 200,000 lbs. of recycled polyethylene plastic.
No trees are cut down for the purpose of manufacturing our fence.
We recycle, regrind, and reuse all our polyethylene – we produce no waste or plastic scrap.
Were possible, we use recycled packaging materials
Our fence is 100% recyclable.
+ Rotomolding =
Easy
Inst
alla
tion
Step 1: Dig holes 10” to 12” in diameter and about 30” to 36” deep in the ground.
Step 2: Attach the support bracket in the groove of the post at 73 ½”.
Easy
Inst
alla
tion
Step 3: Set post in concrete and use metal stiffener to space from post-to-post.
Step 4: Make sure that post is plumb and evenly spaced.
Metal Stiffener
Easy
Inst
alla
tion
Step 5: Once the concrete cures, panels can be installed by sliding them in the channel of the post.
Cutti
ng P
anel
sStep 6:
Panels can be cut to any desired length. a.Remove steel stiffeners from panel. Determine the exact width between post grooves. Mark and cut stiffeners with a metal blade. b.Cut the panel to the stiffener width minus ½” to allow for thermal expansion and contraction.
Easy
Inst
alla
tion
Step 7: Install caps over the post. Caps are pressure fitted.
Recommendation:Panels are universal with no front or back and no top or bottom edge. Randomly installing panels gives the most pleasing aesthetic effect.
Stai
r Ste
ppin
g Pa
nels
Stai
r Ste
ppin
g Pa
nels
Conc
rete
Sur
face
Mou
nts SimTek can be installed
on top of a 8” minimum width poured concrete wall or on a flat surface by using our mounting brackets.
EcoS
tone
Col
ors
Eco Dark Brown Eco Brown
Eco Beige Eco Grey
Pro-
Line
Col
ors Brown Beige Grey
Black Desert White
6’ HighRe
side
ntial
Pro
ject
s
3’ High with OrnamentalRe
side
ntial
Pro
ject
s
Great Around Swimming PoolsRe
side
ntial
Pro
ject
s
Home Owner’s Associations (HOA)
HO
A Pr
ojec
ts
6’ HighCo
mm
erci
al P
roje
cts
8’ HighCo
mm
erci
al/I
ndus
tria
l Pro
ject
s