würth dos range
DESCRIPTION
Brochure covering Würth's range of DOS adhesives and sealants.TRANSCRIPT
DOS A5:Layout 1 15/2/08 17:14 Page 1
WHY OUR SYSTEM
ORGANISATION• The DOS System is simple organised system using a
storage rack, no time is wasted searching for prod-ucts and you gain a quick overview of remainingstock.
• The storage rack enables upside down storage ofbottles enabling the content to be instantly ready todispense without shaking or squeezing.
• You have a capacity for 14 bottles which means highused products can be double stocked.
PRACTICALITY• The practical user-friendly one-handed application
with the easy to operate twist lock means you alwayshave one hand free to hold material or tools.
• The measuring head has a self-cleaning closure sys-tem, this is to make sure that no residual product re-mains in the nozzle.
• The products are silicone free, making them unlim-ited use in automotive environments.
PRECISENESS• The bottle gives you an infinitely variable dispensing
system, quantity can be dispensed based on appli-cation, and this minimises costs of product used andsaves the customer money.
• The accordion bottle is used for high viscosity materi-als which minimises costs because bottle can be vir-tually completely evacuated.
Würth DOS SystemThe Würth DOS system is an innovative one handed measuring system, which represents Würth quality whilst alwayslooking into further development. It is a proven and stylish system, which clearly demonstrates its organisation, prac-ticality and preciseness qualities whilst having valued content.
Würth DOS products are used for the locking and sealing of closely mating metal parts in applications such aslocking threads, retaining bearings, flange and gasket seals and sealing pipe work. They are designed to curewhen oxygen is absent (anaerobic). These products are formulated to give different levels of hardness and re-activity on curing.
PRODUCT • The products are used in the automotive, metal, construction and electronic industries
• The material is applied in a liquid state directly onto an oil and dust free surface
• The cleaner the surface, the stronger the bond
• These adhesives cure in an anaerobic environment, i.e. the adhesive only hardens when not exposed to oxygenfor this reason, the containers are only 3/4 full.
• The curing speed is influenced by the catalytic effect of metal as well as the width of the gap. The more passivethe material and the wider the gap, the slower the adhesive will cure. These passive materials are: Nickel, zinc,tin, precious metals, aluminium with a low Cu and /or manganese content, high-alloy steel, oxide or chromate lay-ers, plastics, glass and ceramic materials
• The product is resistant to a wide variety of lyes, gases, solvents, oils and fuels.
DOS A5:Layout 1 15/2/08 17:14 Page 2
Screw retaining and sealing compound – hardlyremovable. For securing, attaching and sealingof screws, studs bolts, nuts, threaded inserts andplugs, which are not required to be removedunder normal circumstancesFEATURES AND BENEFITS• Well suited for heavy duty screw connections• No additional securing devices required• Removable only after heating to 300°C• Under normal conditions only removable
with special tool and/or heating• Outstanding resistance to chemicals and heat• A wide range of applications• Prevents loosening• No safety problems
PROPERTIESChemical Description • Dimethylacrylate
Colour • Fluorescent greenHand-Tight • 10 - 20 minutes
Usable after • 1 - 3 hoursFinal strength • 5 - 10 hours
Max Thread diameter • M20Max Gap filling capacity • 0.15mm
Screw retaining and sealing compound – re-movable. For securing, attaching and sealing of screws, studs bolts, nuts, threaded in-serts and plugs, which can be removed using normal toolsFEATURES AND BENEFITS• Provides medium strength connections• Can be disassembled using normal tools• Curing is assured even on untreated parts• Can be used with un-cleaned parts• Can be applied to stainless steel and passive
surfaces• No accelerators or activators required• Outstanding resistance to chemicals and heat• A wide range of applications• Prevents loosening• No safety problems
PROPERTIESChemical Description • Dimethylacrylate
Colour • Fluorescent blueHand-Tight • 5 - 15 minutes
Usable after • 0.5 - 1 hourFinal strength • 1 - 3 hours
Max Thread diameter • M36Max Gap filling capacity • 0.25mm
ThreadlockerHigh Strength0893 270 050 50g
ThreadlockerMedium Strength0893 243 050 50g
DOS A5:Layout 1 15/2/08 17:14 Page 3
For high strength assembly of bushes, sleeves,geared wheels, bolts, shaft, hub connectionsand bearing exposed to high loadsFEATURES AND BENEFITS• Dependable curing at low temperatures
around 0°C• A reliable aid in winter• Can be applied to slightly oily surfaces• No need for time-consuming degreasing of
bearings• Maximum gap filling of 0.15mm• Even large deviations can be corrected eco-
nomically• Prevents frictional corrosion • Prevents seizing of bearings, providing easy
disassembly
PROPERTIESChemical Description • Dimethylacrylate
Colour • GreenHand-Tight • 5 - 10 minutes
Usable after • 30 - 40 minutesFinal strength • 3 - 6 hours
Max Thread diameter • M12Max Gap filling capacity • 0.15mm
For sealing of flanges and surfaces with a max-imum gap of 0.3mm. Replacement for solidseals. Well suited for applications requiringgood wetting, such as complicated castings, nar-row webs and smooth surfacesFEATURES AND BENEFITS• Low strength • Easy disassembly
PROPERTIESChemical Description • Dimethylacrylate
Colour • GreenHand-Tight • 15 - 30 minutes
Usable after • 3 - 6 hoursFinal strength • 6 - 24 hours
Bearing RetainerHigh Strength0893 603 050 50g
Flange SealantGreen0893 573 050 50g
DOS A5:Layout 1 15/2/08 17:14 Page 4
For sealing of flanges and surfaces with a max-imum gap of 0.5mm. Replacement for solidsealsFEATURES AND BENEFITS• Large gap filling capability • Completely fills rough surfaces
PROPERTIESChemical Description • Dimethylacrylate
Colour • OrangeHand-Tight • 10 - 20 minutes
Usable after • 3 - 6 hoursFinal strength • 6 - 24 hours
Seals conical/cylindrical threaded pipe connec-tions up to R3”, e.g. sprinkler systems, gas andliquid tightFEATURES AND BENEFITS• Seals immediately under low pressure loads• Pipes can be pressurised immediately
up to approx. 5 bar, after final curing up to300 bar
• Also cures at temperatures below 0°C• Can be used in cold temperatures• High resistance to chemicals• Will not react with most industrial liquids and
gases
PROPERTIESChemical Description • Dimethylacrylate
Colour • Florescent yellowHand-Tight • 15 - 30 minutes
Usable after • 1 - 3 hoursFinal strength • 3 - 6 hours
Max Thread diameter • R3” (M 80)Max Gap filling capacity • 0.50mm
Flange SealantOrange 0893 574 050 50g
Pipe Sealant0893 577 050 50g
DOS A5:Layout 1 15/2/08 17:14 Page 5
For sealing screw connections in pneumatic andhydraulic systems under high loads up to thebursting pressure of the pipe or hoseFEATURES AND BENEFITS• Can be applied to a slightly oily surface • No need for time- consuming degreasing• Excellent resistance to all hydraulic fluids and
fuels• High degree of safety, since impairments
due to dissolving are prevented• Quick curing, even at low temperatures• Minimised down time of your vehicles
PROPERTIESChemical Description • Dimethylacrylate
Colour • VioletHand-Tight • 30 - 40 minutes
Usable after • 2 - 3 hoursFinal strength • 12 - 24 hours
Max Thread diameter • R 3/4’‘Max Gap filling capacity • 0.15mm
Replacement for solid engine seals on pressurechambers as well as screw connectionsFEATURES AND BENEFITS• High temperature resistance• Seals reliably up to temperatures of 280°C• Pressure resistant up to 700 bar• Also suitable for high pressure lines and
pressure chambers• Excellent adhesion• Seals glass, ceramic and metal surfaces per-
manently and securely
PROPERTIESComponents • 1
Base • ResinFilm formation, pot life • 5 - 7 minutes
Thermal behaviour • -50° to 280°CPressure tested up to • 690 bar
Viscosity in mPas • 5000 - 13,200
Hydraulic Sealant 0893 545 050 50g
Motor Sealant 0893 260 100 50g
DOS A5:Layout 1 15/2/08 17:14 Page 6
Klebfix 0893 09 20g0893 090 50gFor bonding of metal, plastic and rubber partsin any combination
Elastofix 0893 092 20gViscous-flexible, black cyanoacrylate with ex-cellent thermic, high impact and peeling resist-ance as well as increased moisture resistance forbonding of metal, plastic and rubber parts inany combination
Plastofix0893 091 20gFor bonding of difficult plastic materials, such asPA, PBT, PET, PI, POM, TPE, TPO, filled elas-tomers and natural rubber. With use of primer(0893 091 0) for plastofix it is also possible tobond the polyolefine plastics PE and PP as wellas PTFE and silicon rubber
SKG Super Instant GlueCyanoacrylate construction adhe-sive in gel form
0893 403 1 20gJoining of rubber profiles for wood and vinylwindows, attachment of signs, bonding of rub-ber seals, repair of broken edges
Associated ProductsDOS Superfast Cyanoacrylate construction adhesives
Primer0893 091 0 20g
Activator 1893 09 2 200ml
DOS A5:Layout 1 15/2/08 17:14 Page 7
Securing, attaching and sealing of screwsstuds, bolts, nuts, threaded inserts and plugs
Assembly of bushes, sleeves, geared wheels,bolts, shaft/hub connections and bearings
Sealing of flanges
Seals conical/cylindrical threaded pipe connections
Sealing screw connectors in pneumatic andhydraulic systems
Replacement for solid engine seals
HighChem
ical Resistance
HighStrength
Medium
Strength
LowStrength
Max Gap
Filling0.15m
m
Max Gap
Filling0.3m
m
Max
GapFilling
0.5mm
QuickCuring
HighTem
perature Resistant
• •• •
• •
• • •• •
•
• •
•• ••
• Threadlocker High Strength• Threadlocker Medium Strength• Bearing Retainer High Strength• Flange Sealant Green• Flange Sealant Orange• Pipe Sealant• Hydraulic Sealant•• Motor Sealant
APPLICATION
The information expressed is intended as a recommendation only, based on our tests and experience. However, we cannot accept any responsibility for results in in-dividual cases because of the wide variety of applications as well as storage and processing conditions beyond our control. This also applies when making use ofour technical and commercial customer service which is supplied free of charge and without obligation. We always recommend that you carry out individual tests.We guarantee the consistent quality of our products. Subject to technical changes and developments.
WÜRTH UKWürth UK was established in 1973, our products are universally acknowledged to be of the higheststandards within the automotive, cargo, marine, motorcycle, agricultural, and metal industries. This,together with our excellent delivery and availability of products, makes us the No.1 supplier of con-sumables to the market place.
Our reputation over the past 34 years has been gained through the adherence to a policy of sup-plying only a product of unrivalled quality, enhanced via a superb distribution network with para-mount emphasis on customer service.
© Würth UK Ltd. All rights reserved in all media.No part of this catalogue may be reproduced in any form, copied or stored electronically, whole or in part without prior written permission.Every effort has been made to verify all information. Products may vary in appearance from those pictured.
Würth UK Limited cannot accept responsibility for any errors or omissions or for any losses that may arise as a result.
Würth UK Limited1 Centurion Way • Erith • Kent • DA18 4AETel. 08705 987 841 • Fax. 0875 987 842 • www.wurth.co.uk
WU
K •
pjc
- 03
/07
DOS A5:Layout 1 15/2/08 17:14 Page 8