ws03 air interface sublayers rlc filled in
DESCRIPTION
SublayersTRANSCRIPT
-
Uu Interface Sublayers RLC Worksheet 03
TX Buffer RLC Control SDU Re-assembly
Seqmentation and Concatenation
Re-TXBuffer
Remove RLC Header
Reception buffer and ARQ Re-order
RoutingAdd RLC Header
PDCP PDURLCHeader
PDCP PDURLC Header
TM-SAP TM-SAP
TX BufferTransmitting TM-RLCentity
Receiving TM-RLC entity
DCCH/PCCH/CCCH TMD PDU
No segmentation or concatenation of RLC SDUsNo RLC header
Uu-LTE
TX Buffer
Seg and Conc
Add RLC Header
Recep buffer and HARQ re-
order
RemoveRLC Header
SDU Re-assemble
UM-SAP UM-SAP
Transmitting UM-RLCentity
Receiving TM-RLC entity
Uu-LTE
DTCH UMD PDU
FI E SN (5 bit)
(10 bit)
R R R EFI SN
SN
TXSeg/Conc RLC PDUs so UMD PDU fits into RLC PDUs total size as indicated by the lower layers
RXDuplication detection/re-order/loss detectionRe-assemble/discard if necessary
FI = Framing indicator Indicates where data found in segments'E = Ext bit 0 data bits follow and , 1 other header fields follow.SN = Sequence Number Incremented by 1 for each RLC PDUR = Reserved
AM-SAP
Data PacketControlPacket
DCCH/DTCH DCCH/DTCH
AMD PDU or AMD PDU Segment or Status PDU
E SNFIPRFD/C
SN
D/C = 0 control pkt and 1 data pktRF = Reseg flag 0 complete PDU, 1 PDU segP = Polling 0 no status rep req, 1 status rep req
TXSeg/Conc RLC PDUs so AMD PDU fits into RLC PDUs total size as indicated by the lower layersThe TX supports retrans of RLC data PDUs (ARQ)
RXDuplication detection/re-order/loss detectionRetrans requestsRe-assemble/discard if necessary
Page-1