ws 300v cm / ws 311v cm - rus-intercom

WS 300V CM / WS 311V CM

www.commend.com

Security and Communication

The design and/or specifications of products may be subject to change for improvement without prior notice. Errors excepted.

WS 300V CM / WS 311V CM DATASHEET V1.0/1116 SA | 1

Vandal resistant wallmount stations with built-in HD camera

HighVolume

SIPvideo

Vandal-resistant

IK09

Weather-proof

IP66

The Intercom video solution for security-critical applicationsThe vandal resistant SIP wallmount stations of series WS 300V CM and WS 311V CM with built-in high-performance colour video camera were developed and designed specifically for areas with high require-ments on safety and system integration. The technology provides ex-cellent audio quality and comprehensibility independent of back-ground noise.

Each button of a series WS 300V CM station can be allocated to a call number and can be labelled individually. The red emergency call but-ton of the WS 311V CM is easily visible from a considerable distance and can be pushed quickly in emergency situations.

The 3 mm thick stainless steel front panel with tamper protection and special screws offers protection against vandalism. The robust construction also provides full protection against water, dirt and dust and is IP66-rated.

The series WS 300V stations are equipped with a sensitive camera sensor that offers a superior dynamic range. Despite the flat front glass the camera still has a very wide viewing angle, both horizontally and vertically.

www.commend.com




The two built-in loudspeakers support high audio volumes and superior acoustic intelligibility; they also allow automated playback of pre-recorded audio messages for user guidance purposes.

The camera provides a very large viewing angle (150° diagonally) as well as an ultra high dynamic range. In addition, the station is equipped with flat scratch-resis tant camera glass for extra sabotage protection.

Commend offers three versions of series WS 300V stations to suit your individual needs: You can choose between one or three call buttons, each with its in-dividual label, or a red emergency call button that can be pressed quickly in emergency situations.

Two digital MEMS microphones ensure high sound quality, reliability, durability and robustness. The be-velled edge of the microphones adds to the stability of the series WS 300V CM / WS 311V CM stations.

The robust stainless steel construction and IP66 rating ensure uninterrupted, trouble-free operation in publicly accessible outdoor areas while providing full protection against water, dirt and dust.

12 white LEDs make a big difference, as they make colours visible even at night – another feature that sets the station series above other Intercom stations on the market.

Features and highlights

www.commend.com




Features and highlights

Optimum speech intelligibilityA loud, clear and beautifully crisp voice signal ensures natural, face-to-face style communication with visitors and customers – even in challenging situations: – Suppression of interfering background sounds such as

traffic noise

– Easy to hear, thanks to higher volume capacity than standard SIP stations

– OpenDuplex® for simultaneous speaking and listening at high volume levels

– Switched Duplex for situations with extreme ambient noise (e.g. tunnels)

– HD Voice speech quality with 7 kHz audio bandwidth

Always at your service, thanks to redundancy – Stations can be logged in at several servers simul taneously

– Calls are transmitted via the active server

– In case none of the servers can be reached, the system can try to establish a serverless connection if necessary – e.g. by calling all stations on the network

Automated voice messagesPressing the call button at an entrance or emergency call station triggers the playback of a customised voice message, reassuring the caller that someone will be available shortly to assist.

Relays enable powerful control functions *Stations come with the ability to remote-control relays: – Doors, shutters, gates and barriers open effortlessly at

the touch of a button (desktop or mobile telephone) Easy control of signal lamps and other subsections

– Attendant contacts for additional indication of operating states such as error, ringing, active call, etc. (e.g. automatic activation of flashing light signal to indicate incoming calls)

Quickly assign calls and reduce waiting timesIn serverless communication scenarios the next free query point is found by calling each one using an action sequence. Server integration, on the other hand, allows for incoming calls to be allocated instantly and automatically to the next available opera-tor (e.g. at a call centre). This way, waiting times for callers are reduced to an absolute minimum.

Configuration made easyThe stations are specifically designed for easy, convenient con-figuration over the special web interface. A few clicks is all it takes to perform an update and even set up complex action se-quences. For large-scale installations, the provisioning function helps to deploy configuration settings automatically and conve-niently to thousands of connected stations at once.

Location identification messagesAn optional location identification message (e.g. “Emergency Call Station at Subway Station West Park”) can be defined for each station individually. The identification message is played back automatically when the operator at the control desk or que-ry point takes the call. This way, the operator knows imme diately where the call is coming from without having to ask. This is par-ticularly important if there is no visualisation system installed at the control desk or query point, or if the call is relayed to a mobile phone.

Simply compatibleStations can be integrated seamlessly into existing Commend security and communication systems as needed. This allows adding features such as announcements, audio recording, inter-facing with external systems (e.g. visualisation) and many more.

Wide range of functions – Telephone directory

– USB ports for add-on modules or ex pansion modules

* Only with expansion module EB3E2A-AUD

www.commend.com




Product details

Station versionsSeries WS 300V CMThis series includes the following versions:

WS 301V CM

One call button

WS 303V CM

Three call buttons

Series WS 311V CMThis series includes the following version:

WS 311V CM

One emergency call button

Accessories

Note:EB3E2A-AUD and PA 25W POE-DC are optimised for installation within the flush mount box WSFB 50V or the surface mount box WSSH 50V.

Optional expansion module EB3E2A-AUDThe EB3E2A-AUD expansion module provides an easy way to expand the I/O and audio capabilities of an Intercom station. It supports three inputs and has two output relays and provides ports for direct connection of an external loud-speaker, external microphones and handset. Line-in and line-out connectors provide additional flexibility. The module is connected to the Intercom station PCB via a USB cable and is immediately available on the system.

Optional power injector PA 25W POE-DCIn applications where PoE sourcing equipment is not available, the optional power injector PA 25W POE-DC offers a compact, convenient solution. It sup-ports a wide DC input range (24 – 48 V) and is IEEE 802.3af/at compliant. The power injector connects easily and conveniently to an Intercom station via Ethernet cable.

Optional safety switch box IP Secure ConnectorThe IP Secure Connector ensures absolute safety for the network – even if the connected Intercom station is located outdoors: If an unauthorized at-tempt is made to remove the Intercom station, e.g. to gain access to the connected Ethernet cable, the IP Secure Connector interrupts the connection to Intercom station and LAN. This ensures that it is neither possible to access the network nor to open a door or gate. In addition, the IP Secure Connector provides power supply in form of PoE+ and has two inputs as well as three outputs.

Images not to scale!

www.commend.com




Passion for Audioby Commend

Ultimate speech intelligibility in any situation OpenDuplex® with HD Voice by Commend enables natural, hands-free talking

and listening – as crystal clear and natural as a face-to-face conversation.

Audio // FunctionsDynamic background noise suppression virtually eliminates all ambient noise

Peer-to-peer audio – reduces network and server load to ensure efficient use of resources

Conference call function for simultaneous talking with multiple conversation partners

OpenDuplex® for natural, hands-free communication

Switched Duplex for situations with extreme ambient noise (e.g. tunnels)

Beaforming for best intelligibility and ambient noise suppression

Naturalcommunication

Highvolume

Background noise suppression

Crystal clearaudio

Audio // BasicsHD Voice HD Voice by Commend transfers the audio signal

with a bandwidth of 7 kHz

Amplifier High efficient class-D amplifier with 2.5 W

Sound pressure level High volume up to 99 dB

Microphone Two digital MEMS microphones

Loudspeaker 2 x 8 Ω loudspeaker with humidity-resistant special membrane type for optimum sound quality

Learn more

audio.commend.com

Beamforming


www.commend.com



WS 300V CM / WS 311V CM DATASHEET V1.0/1116 TE | 1

Technical specifications

Line length in LANThe maximum line length of Cat. 5 cabling in a LAN is 100 m (328 ft) – e.g. from switch to Intercom station.

System requirements – Compatible SIP server

– VirtuoSIS (min. PRO 800 5.0, min. base licence PRO 3)

– GE 800 with G8-VOIPSERV

– Serverless operation

Extent of supply – SIP station

– Screws for mounting (4 x Torx TR25 security countersunk screws, M5x10)

– Short reference

– Tamper detection plate

Technical data WS 300V CM / WS 311V CM

IP rating: IP66 (acc. EN 60529)

Mechanical impact resistance: IK09 (acc. EN 62262)

Front panel: stainless steel, 3 mm (0.12 in)

Microphone: 2 x digital MEMS microphones

Loudspeaker: special membrane type for optimal sound quality

Amplifier: integrated class-D amplifier with 2.5 W

Sound pressure level: max. 99 dB

Call indication: 2 x multifunction LED (multi-coloured)

Call button: WS 301V CM: one back-lit direct dialling button with label area

WS 303V CM: three back-lit direct dialling buttons with label areas

WS 311V CM: one back-lit large red emergency call button

Audio transmission bandwidth: 7 kHz

Codecs: Audio: G.722, G.711 a-law and G.711 u-lawVideo: H.264 (SIP video)

Operating temperature range: –40 °C to +65 °C (–40 °F to +149 °F)

Storage temperature range: –40 °C to +65 °C (–40 °F to +149 °F)

Relative humidity: up to 95%, not condensing

Connection: RJ45 jack for Ethernet and PoE, USB (Type A) and mini USB (Type A) for external devices

Power supply: PoE: IEEE 802.3af/at Class 3

Cabling: min. Cat. 5

Mounting: flush mount kit WSFB 50Vsurface mount kit WSSH 50V

Dimensions (H x W x D): mounting with flush mount kit: 279 x 164 x 14 mm (10.98 x 6.46 x 0.55 in)

mounting with surface mount kit: 279 x 164 x 50 mm (10.98 x 6.46 x 1.97 in)

Weight incl. package: 1,400 g (3.1 lbs)

Optional accessories: PA 25W POE-DC (power injector)EB3E2A-AUD (expansion module)

IP Secure Connector (safety switch box)

Technical data camera

Image sensor: 1/3 inch RGB CMOS

Lens: F2.0, fixed aperture,150° diagonal angle,

125° horizontal angle,100° vertical angle

Camera illumination: 12 white LEDs

Resolution: 1280 x 960

Video format: H.264, Motion JPEG (MJPEG)

Frame rate: 30 fps


www.commend.com



WS 300V CM / WS 311V CM DATASHEET V1.0/1116 IN | 1

Installation instructions

Dimensions front panelMeasuring units in mm (in), not to scale!Front panel thickness: 3 mm (0.12“)

160 (6.3)140 (5.5)

275

(10.

84)

255

(10.

05)

4 x Ø

6

(0.24

)

Recommended mounting heightThe upper edge of the station approx. 1.65 m (5.4 ft) from the finished floor. Adapt the mounting height to the individual needs.

Finished floor

appr

ox. 1

650

(65)

Mounting instructions – Do not expose the Intercom station to extreme temperatures (see

“Technical data“ on TE | 1).

– This Intercom station shall be installed or replaced by trained and qualified personnel only.

– Do not install the Intercom station on unstable walls or on surfaces, which cannot support the device’s weight.

– Observe the country-specific standards for installation, mounting and configuration.

– Observe the precautions for handling of electrostatic sensitive devices.

– Only use recommended tools when installing the Intercom station.

– Only accessories that comply with the Intercom station‘s technical specifications shall be used.

– Use shielded Ethernet cables only.

– All connected circuits shall fulfil the requirements for Safety Extra Low Voltage (SELV) and Limited Power Source (LPS) according to IEC/EN 60950-1.

– Before using the Intercom station, ensure all cables are correctly con-nected and not damaged.

– Disconnect the Ethernet cable for any maintenance of the device.

– Allow the device to cool down completely before touching parts inside.

– Do not make any unauthorised modifications to the Intercom station.

– For flush mounting, a flush mount kit WSFB 50V is required (available separately).

– For surface mounting, a surface mount kit WSSH 50V is required (availa-ble separately).

– Optionally, the rain protection roof WSRR 50V is available.

T

T

T

R

www.commend.com




Mounting of EB3E2A-AUD and PA 25W POE-DCThe following illustration shows the mounting of both modules (expansion module and power injector) within a flush mount box – e.g. flush mount kit WSFB 50V or surface mount kit WSSH 50V.

NOTES: – The power injector must always be placed on the left side within the

flush mount box.

– The expansion module comes with a back cover. For mounting within the flush mount kit WSFB 50V or surface mount kit WSSH 50V, the back cover must be removed. The screws for the back cover can be used to mount the expansion module into the flush mount box.

Mounting of tamper detection plateInstall the tamper detection plate (for triggering the tamper detection alarm; in extent of supply) into the flush or surface mount box as shown in the fol-lowing assembly drawing.

Use supplied screws to fasten the modules to the flush mount box.2

Put the modules into the flush mount box (no screws).1

OUT 1

OUT 1

OUT 2

OUT 2

IN1

GND

IN2

IN3

EN

LO–

LO+

GND

LI–

LI+

MIC+

MIC–

LS+

LS–

+DC–

IN

OUT

OUT 1

OUT 1

OUT 2

OUT 2

IN1

GND

IN2

IN3

EN

LO–

LO+

GND

LI–

LI+

MIC+

MIC–

LS+

LS–

+DC–

IN

OUT

2 2

22

11

OBSESSIVEABOUTQUALITY

www.commend.com




Connection

The following illustration shows the connection of the power injector or a switch and expansion module to the Intercom station.

A strong worldwide networkCOMMEND is represented all over the world by local Commend Partners and helps to improve security and communication with tailored Intercom solutions.

www.commend.com

Quality tested. Reliable. Smart.COMMEND products are developed and manufactured by Commend Inter national in Salzburg, Austria.

The development and manufacturing processes are certified in accordance with EN ISO 9001:2008.

The technical data contained herein has been provided solely for informational purposes and is not legally binding. Subject to change, technical or otherwise. IoIP®, OpenDuplex® and Commend® are trademarks registered by Commend International GmbH. All other brands or product names are trademarks or reg-istered trademarks of the respective owner and have not been specifically earmarked.

USBjack

(Type A)

RJ45 jack (Ethernet/PoE)

Slot for tamper detection

Mini USB jack (Type A) e.g. for connection to an EB3E2A-AUD expansion module

ws 300v cm / ws 311v cm - rus-intercom

Documents