wpc series project dt x cut-off led wall pack project

[email protected] | (909) 627-5483Indoor > WPC Cut-Off LED Wall Pack

PROJECT DETAILS BOXPROJECT

PRODUCT

PREPARER

TYPE

NOTES

Installation & MountingLuminaire mounting designed for standard J-Box. Can be mounted directly to surface. Featuresmultiple conduit entries.

Controls & Dimming0-10 Volt DimmingBluetooth Mesh ControlTwist-lock Dusk to Dawn PCBi-level Occupancy Sensor

ElectricalVoltage:100-277 Volt

Wattage:20w, 24w, 48w, 80w, 100w, 150w

Warranty7 Year Limited Warranty

ConstructionThis LED wall pack is well constructed and has a corrosion resistant polyester powder coat finish, as well as an IES Type IV optic that is made of UVresistant polycarbonate. It can replace a 450w metal-halide lighting fixture & is also UL approved & DLC Listed.

Applications: Parking lots, plaza lighting, shopping mall, garden, roadways, site and area Lighting and other general lighting applications.

SPECIFICATIONS Product Features

DESCRIPTIONThe WPC LED Wall Pack features a slim, low profile Die-cast aluminum housing and has a corrosion resistant polyester powder coat finish. It has an L70 Lifespan of 100,000 hours and a 80% forward-throw light that minimizes light wasted on walls and sky. A power factor of ≥0.95 and IP65 rating for wet locations make the WPC a valuable wall pack for any project. It has a unique funnel heat sink and a separate power supply box and heat sinker for easy installation. It features an independent driver compartment separated from the light engine that optimizes driver lifespan.

WPC SeriesCut-Off LED Wall Pack

BEAM ANGLE

mailto:[email protected]


WPC Series Cut-Off LED Wall Pack

* contact the Nebulite sales team for turnaround time and pricing on finish color customizations

SERIES WATTAGE CCT VOLTAGE OPTICS FINISH*

WPC20W 24W 30 = 3000K

BLANK = 100-277VT2

BLANK = Bronze48W 80W 40 = 4000K T3100W 150W 50 = 5000K T5

Sample: WPC-100W-40-T3-EMOrdering Format

MODEL WATTAGE CCT LUMEN EFFICACY (lm/W) VOLTAGEWPC-20W 20watt 3000K, 4000K, 5000K 2,600lm 130 lm/W 100-277vacWPC-24W 24watt 3000K, 4000K, 5000K 3,120lm 130 lm/W 100-277vacWPC-48W 48watt 3000K, 4000K, 5000K 6,240lm 130 lm/W 100-277vacWPC-80W 80watt 3000K, 4000K, 5000K 10,400lm 130 lm/W 100-277vac

WPC-100W 100watt 3000K, 4000K, 5000K 13,000lm 130 lm/W 100-277vacWPC-150W 150watt 3000K, 4000K, 5000K 19,500lm 130 lm/W 100-277vac

Performance Data

20-48W Size (in) 80-150W Size (in)

Input Voltage 100-277V

Input Frequency 50/60 HzRated Wattage 20w, 24w, 48w, 80w, 100w, 150w

Efficacy 130 lm/WCRI >70

Available CCT 3000K, 4000K, 5000KRated Life (L70) 100,000 hrs

IP Rating IP65PF >0.95

Certifications ETL, DLC, CE, RoHSWorking Temp. (°C) -40°F to 122°F

LED Light Source Philips Lumileds 3030

Performace Summary

MOUNTING OPTIONS

JB Standard J-BoxANT-9 Low Voltage Microware Bi-Level Sensor

EM LED Emergency Driver




Power supply 12V-24V DC

HF System 5.8GHz±75MHz

Dim control output 0-10V, max. 25mA sinking current

Detection radius Max 26ft. (8m) / 360°

Mounting height Max 40ft.

Remote range 50ft. (15m) indoor, no backlight

Humidity Max. 95% RH

Temperature -40°F — 158°F (-40°C — 70°C)

ANT-9 Low Voltage Microware Bi-Level Sensor

NOTE: The high-frequency output of this sensor is <0.2mW - that is just one 5000th of the transmission power of a mobile phone or the output of a microwave oven.

ANT-9 is a moving object sensor that can detect range of 360’and it’sworking frequency is 5.8GHz. The advantage of this product is stableworking state (stable working temperature: -40°C-+70°C), ANT-9 adopts a microwave sensor(high-frequency output <0.2mW),so that it is safe and performs better than infrared sensor.

If offers 3 levels of the light Control : 100%--dimming light(0,10%,30%,50°/o)--off; Periods of selectable waiting time: motionhold-time and 24hours, selectable daylight threshold, and freedom ofdetection area. If natural light lower Light-control setting(10Lux,30Lux,50Lux),the light will not automatically on (0,10%,30%,50°/0). When person enter in the room, the light will on 100c10,after person left the room, the room enter in stand by level after hold on time.

Specifications

Once powering the device up, the ANT-9 will use factory default paramenters to operate. If adjus-ments are needed, “RC-100“ Wireless IR Configu-ration toll must be used.

Sensor Coverage

Utilizing Field and Introduction

Function and Options

Wiring Diagrams




LED Emergency Driver YH11B-05WLProduct description- Suit for 5W to 100W lamp with external led driver.- Used with LiFePO4 battery.- 25-52VDC,100-400VDC output.- LED emergency converter that can transfer standard LED fitting into emergency LED fitting.- Accessary test switch and charge indicator.

Applications- UL Listed for dry/damp locations.- For use on a wide range of LED fittings to convert them from standard to emergency fitting.- Additional Relay that can control standard LED driver.- Deep discharge protection.- Ambient range ta 10....60°C.- IP20 protection.- Not intended for use in luminaries for high-risk task area lighting.

Dimensions

Ordering Data

Model No. Input Voltage Output Voltage Poer(Emergency mode) Battery Pack Duration (EM mode)

YH11B-05WL-55 100-277Vac,50-60Hz 25-52V,5W,CP, LVLE LiFePO4,6.4V,1.6Ah,10.24Wh 90minutes

YH11B-05WL-400 100-277Vac,50-60Hz 100-400V,5W,CP LiFePO4,6.4V,1.6Ah,10.24Wh 90minutes




Technical Data

ITEM DATA

Rated input voltage 100-277VAC,50/60Hz

Input current 10-50mA

Input power <4W

Power factor >0.50

Output wire L-out N-out (LED load input) AC 1.5A Max

Output voltage range DC25-52V,55V max; DC100-400V, 420Vmax

Output voltage(emergency mode) 5W Constant power (min4.6W. 5.2W max)

Battery pack voltage/capacity LiFePO4 6.4V,1.6Ah,10.24Wh;

Recharge current 0-250mA

Recharge time 24hours

Discharge time 90 minutes

Max. casing temperature tc 70°C

Ambient operating temperature ta 10- 60°C

Service life 50,000 hours

RFI/EMI FCC

Protections:- Input over current protection.- Output over voltage protection.- Output under current protection.- Output short circtit protecton.

CAUTION:

- DO NOT MOUNT NEAR GAS OR ELECTRONIC HEATERS.

- EQUIPMENT SHOULD BE MOUNTED IN LOCATIONS AND AT HEIGHTS WHERE IT WILL NOT BE SUBJECTED TO TAMPERING BY UNAUTHORIZED PERSONNEL.

- THE USE OF ACCESSORY EQUIPMENT NOT RECOMMENDED BY THE MANUFACTURER MAY CAUSE AN UNSAFE CONDITION.

- DO NOT USE THIS EQUIPMENT FOR OTHER THAN ITS INTENDED USE.

- Use with grounded, UL Listed, damp location rated fixtures and case should be grounding.

- The equipment is intended for ordinary locations and for permanent installation into one or more Listed emergency luminaires.




Installation Instruction

- Please install this product properly by the licensed electrician.- Surface mounting and suspending mounting are available. - It is only used for 100W lighting fixtures.- Please check and confirm all the data and usage surrounding before installation.- Damp or wet location installation is NO.- This item could be used in the sealed fixtures or installed open area of the fixtures.- Please keep it away from the flammable materials with a place of good heat dissipation.- Please charge the battery consistently for >24 hours for the first time usage so as to activate the whole battery cells of discharging/charging duration.

Wiring Diagram (Non-maintained)

Wiring Diagram (Non-maintained)




Test Switch

Emergency conversion Kit will go into emergency mode if test switch is pressed when main supply is on, while it will go into charging mode if test switch is not pressed. In emergency mode, press the test switch for 3 seconds to turn off the current emergency state.

- Red stable: charging mode or charging full.- Red on: main power off or discharging mode.

LED Indicator

- To guarantee the rated discharge time, please charge the battery for more than 12 hours. Please ensure that the voltage is 80% higher than the rated voltage, less than 110% of the highest rated voltage.

- Charge and discharge cycle needs to be done at least once every three months, and the continuous charging time can not exceed 3 months.

Attention

- Warranty 5 years

- Except for the following circumstances: 1) Improper installation or operation. 2) Misuse. 3) Abuse. 4) Unauthorized or improper repair alteration. 5) Accident or negligence in use, storage, transportation. 6) Any natural acts.

* If users would like to change the batteries pack, please use the nominated models of STREAMER , then it will be under the warranty.

Warranty


wpc series project dt x cut-off led wall pack project

Documents