world congress on functional...

http://biotechnologyconferences.com/http://functionalmaterials.conferenceera.com/

World Congress on Functional Materials

Theme: “Functional Materials

2019: Navigating The Future of Materials”

http://functionalmaterials.conferenceera.com/

Scientific ProgramDay 1 May 13, 2019, Valencia, Spain Room 1

09:00- 09:20 On spot Registrations and Distribution of Conference Material

09:20- 09:30 Introduction, Welcome note and Conference Inauguration

KeyNote Session

09:30- 10:00 Title: Progress on Porous Ceramics for Heat-InsulationChang-An Wang, School of Materials Science and Engineering, Tsinghua University, China

10:00- 10:30 Title: Highlights of Charged Particle guiding through Insulating NanocapillariesDr. HC. Nikolaus Stolterfoht, Helmholtz-Zentrum Berlin, Germany

10:30- 11:00 Title: Application of Biomimetic Calcium Phosphate Nanoparticles in Nanomedicine- An Overview

Dr. Michele Iafisco, Institute of Science and Technology for Ceramics (ISTEC), National Research Council (CNR), Italy.

Tea and Refreshments Break- 11:00-11:20

Sessions on Material Science

11:20- 11:40 Title: Use of Functional Additive-based Solutions for Size Regulation of Microcapsules, Down to the Nano RangeAshok M. Adur, Vertellus LLC, USA

11:40- 12:00 Title: "Green and Facile Synthesis of Polyoxometalate – Reduced Graphene Oxide Nanocomposite Having Excellent Electrochemical Properties"Catherine Debiemme-Chouvy, Laboratoire Interfaces et Systèmes Electrochimiques, Sorbonne Université,France

12:00- 12:20 Title: Cellulose Filament Chemical Modification for Natural Fiberplastic Reinforcement

Daniel Montplaisir, Universite du Quebec à Trois-Rivières, Canada

12:20- 12:40 Title: Two-Dimensional Multiple h-BN Assisted Exfoliation of Crystalline AlN Film grown by Metalorganic Chemical Vapor Deposition

Jinmin Li, Institute of Semiconductors, Chinese Academy of Sciences, Beijing, China

12:40- 13:00 Title: Adaptive Modulation of Interfacial Kinetics between Homogenous Bilayer Oxide Memristor for Emulating Learning ProtocolsFei Zeng, School of Materials Science and Engineering, Tsinghua University, China

Lunch Break 13:00- 13:50

13:50- 14:10 Title: Where Silver meets Fluorine: Unusual Properties of Fluoroargentates(II)Wojciech Grochala, University of Warsaw, Poland

14:10- 14:30 Title: Thermal Properties of Graphite Flakes and/or Carbon Fibres Reinforced Aluminum Matrix Composites with specific Architecture

Jean-François SILVAIN, Institut de Chimie de la Matière Condensée de Bordeaux, France

14:30- 14:50 Title: Preparation of different shaped α-Fe2O3 Nanoparticles with Large Particle of Iron Oxide Red

Jianxing Liu, School of Metallurgy, Northeastern University, China

14:50- 15:10 Title: Molecular Dynamics Modeling and Simulation of Diamond Cutting of single Crystal SiO2

J.X. Chen, Harbin Institute of Technology, China

15:10- 15:30 Title: Photoelectrochemical property and Photocatalytic activity of C3N4 based Composite

Jinshu Wang, College of Materials Science & Engineering, Beijing University of Technology, China

15:30- 15:50 Title: Cellular Biomorphic Ceramics for Catalytic Oxidation of Phenol in Aqueous Solution

Martins Randers, Institute of Silicate Materials, Riga Technical University, Latvia

Tea and Refreshments Break 15:50-16:10

16:10- 16:30 Title: From Endohedral Complexes to Endomaterials V.T.Lebedev, NRC Kurchatov Institute, Russia

16:30- 16:50 Title: The Convergence of Technologies, Generates convergence in the RegulationsGuillermo Valdés Mesa, Havana University Center Biomaterial, Cuba

16:50-17:10 Title: A Review on the Study on the Buffer Layer assisted ZnO prepared by LPCVDYuneng Chang, Department of Chemical and Material Engineering, Lungwha University of Science and technology, China

16:50-17:10 Title: A Review on the Study on the Buffer Layer assisted ZnO prepared by LPCVDYuneng Chang, Department of Chemical and Material Engineering, Lungwha University of Science and technology, China


Day 1 May 13, 2019, Valencia, Spain Break out Room 2

11:20- 11:40 Title: Microfluidic Preparation of Smart Emulsions and Functional MicroparticlesJianhong Xu, Tsinghua University, China

11:40- 12:00 Title: Strong Genotoxicity of Variable NanoparticlesOleksandr H. Minchenko, Palladin Institute of Biochemistry, National Academy of Sciences of Ukraine, Ukraine

12:00- 12:20 Title: Kinetics and structure of localized plastic deformation autowaves in shape memory material

Vladimir Danilov, Russia

12:20- 12:40 Title: Conformationally Adaptive Biosensors

Shlomo Yitzchaik, Institute of Chemistry and the Center for Nanoscience and Nanotechnology, The Hebrew University of Jerusalem, Israel

12:40- 13:00 Title: Hydrogen Storage and Delivery; Vapour Hydrolysis of LiAlH4 for Mobile Applications

Lizzie Ashton, Department of Chemistry, Loughborough University, United Kingdom


13:50- 14:10 Title: Morphology optimization of LiNi1/3Mn1/3Co1/3O2 cathode material for advanced batteries

Marketa Zukalova, J. Heyrovsky Institute of Physical Chemistry, The Czech Academy of Sciences, Czech Republic

14:10- 14:30 Title: Mechanical spectroscopy as an in situ tool to study first and second order transitions in metastable Fe-Ga alloys

I.S. Golovin, National University of Science and Technology, Russia

14:30- 14:50 Title: Aggregation Induced Blue Shifted Emission (AIBSE) Characteristics in Benzimidazole Based Heterocycles

G. R. Suman, Department of Physics and Electronics, CHRIST (Deemed to be University), India

14:50- 15:10 Title: A new class of composite bronzes reinforced with steel dendrites with a high level of tribological properties

B. A. Potehkin, Ural State Forest Engineering University, Russia

15:10- 15:30 Title: Ca-SrCu2O2 nanomaterial for High-Performance SupercapacitorsHasi Rani Barai, School of Mechanical and IT Engineering, Yeungnam University, Korea

15:30- 15:50 Title: Reduced strength of wood and its usage forecastShamaev Vladimir, Voronezh State University of Forestry and Technologies, Russia

Theme: “Functional Materials

2019: Navigating The Future of Materials”


Tea and Refreshments Break 15:50-16:10

16:10- 16:30 Title: Demand for Biogas: State of the Art and Future PerspectiveAbdeen Omer, University of Nottingham, UK

16:30 16:50 Title: Carbon nanotube modified with room temperature ionic liquids as a novel electrode material for the determination of some pollutants in environmental samplesAhmed Abuismaiel, Palestine

16:50 17:10 Title: Photopolymerization of diacetylene alcohol derivatives: from red to blue phase super-stable polymeric filmA.S. Alekseev, Prokhorov General Physics Institute, Russian Academy of Sciences, Russia

Day 2 May 14, 2019, Valencia, Spain

KeyNote Session

09:30- 10:0 Title: Ultrasound and Responsive Materials for Biomedical Applications: Direct and Indirect EffectsLeonardo Ricotti, BioRobotics Institute of SSSA, Italy.

KeyNote SessionSessions on Material Science

10:00- 10:20 Title: Numerical analysis of the effect of the activation process on the formation of the microporous structure of the activated carbonsMirosław Kwiatkowski, Faculty of Energy and Fuels, AGH University of Science and Technology, Poland

10:20- 10:40 Title: Zinc-modified Ca-Si-based Ceramic Coatings Promote Osteogenic Differentiation of Bone Mesenchymal Stem Cells In Vitro and In Vivo Meiyan Wang, The Institute of Biomedical Sciences and School of Life Sciences, East China Normal University, China

10:40- 11:00 Title: Sintering of Luminescent Eu-Doped Yttria-Silicate Powder by Spark Plasma SinteringFernando Juarez Lopez, Instituto Politécnico Nacional-CIITEC, México

Tea and Refreshments Break- 11:00-11:20

11:20- 11:40 Title: Upcycling of Polymer Materials by Incorporating Property-Enhancing Functionalised NanoparticlesFeras Korkees, Materials Research Centre, Swansea University, United Kingdom

11:40- 12:00 Title: Structural Evolution and applications of MOFs and ZIFs synthesized via a reaction diffusion process at Room TemperatureMohamad Hmadeh, Department of Chemistry, American University of Beirut, Lebanon

12:00- 12:20 Title: NOCANTHER: GMP scale up for Drug Delivery nanosystems

O.Ibarrola, Responsible for ProcessTechnologies, Biopraxis Research AIE, Spain



12:20- 12:40 Title: Use of Lithium Borate as Radiation Sensor in Medical ApplicationsP. R. González, Instituto Nacional de Investigaciones Nucleares, Carretera México-Toluca, Mexico

12:40- 13:00 Title: STRAIN ENGINEERING AND SURFACE HYDROPHOBICITY OF NiTi SHAPE MEMORY ALLOYS

Ping Wu, Entropic Interface Group, Engineering Product Development, Singapore University of Technology and Design, Singapore

13:50- 14:10 Title: Doped Nickel Oxide Nanocrystals for Solution-Processed Hole Extraction Layers in High Efficient and Robust Organic Solar Cells

Riva Alkarsifi, Aix Marseille Univ, CNRS, CINAM, Marseille, FranceLunch Break 13:00- 13:50

14:10- 14:30 Title: Extreme Biomimetics: Functionalization of Nanostructured 3D Carbon-Spongin-Composites

S. Żółtowska-Aksamitowska, Institute of Chemical Technology and Engineering, Faculty of Chemical Technology, Poznan University of Technology, Poland

14:30- 14:50 Title: Performance comparison of commercial TiO2: separation and reuse for bacterial photo-inactivation and emerging pollutants photo-degradation

Samuel Moles, Spain

14:50- 15:10 Title: Characterization of material bases biocomposites for detection of Escherichia coli

Tamara Lobaina Rodríguez, Centro Nacional de Biopreparados, Cuba

Tea and Posters 15:10-16:10

Award Ceremony

16:10- 16:30 Title: Ultrastrong Nanostructured Zirconia-based Ceramics fabricated by an Oscillatory Pressure Sintering (OPS) ProcessZhipeng Xie, School of Materials Science and Engineering, Tsinghua University, China

16:30- 16:50 Title: Development and Application of new Dry Barrier Powder Refractory for Aluminum Electrolysis CellChanglin Li, Zhengzhou Nonferrous Metals Research Institute Ltd of Chalco, China

Poster Presentation 15:10- 16:1016:50- 17:10

Poster 1 Title: Optimization and ISO scale-up of magnetic nanoparticles

O Ibarrola, BioPraxis Research AIE, Spain

Poster 2 Title: Contribution to the Study of the Ductile Damage of the First Damage Phase of A48AP Steel for Industrial Manufacturing

A. Slimane, Department of Mechanical Engineering, University of Sidi-Bel-Abbes, Algeria


Poster 3 Title: Synthesis and Characterisation of different blends of virgin and recycled polyethylene modified by naturel fibres Alfa

Benalia Kouini, Materials and environment, Environment, UMBB University,Boumerdes , Algeria

Poster 4 Title: Catalytic behavior of copper-amine complex supported on mesoporous silica SBA-15 as a selective catalyst for mono-Aza-Michael addition

Bouhadjar Boukoussa, Université Oran1 Ahmed Ben Bella, El- Mnaouer, Algeria

Poster 5 Title: Investigation of Potentiometric All-solid-state pH Sensor Based on Ruthenium Dioxide Membrane Deposited on Silicon Substrate

Yi-Hung Liao, Information and Electronic Commerce Management, TransWorld University, Taiwan

Poster 6 Title: Effect of Number plies laminates, Notch Diameter and Temperature on the load at break

Leila Belgacema, Research Center in Industrial Technologies CRTI, Algeria

Poster 7 Title: Preparation and applications of g-C3N4–nanosheet based nanocomposites as photocatalyst and photo- and electrochemical sensors

Mitra Mousavi, Faculty of Chemistry, University of Tehran, Iran

Poster 8 Title: Conductive/magnetic metal–organic frameworksFrancisco Torrens, Institut de Ciència Molecular, Universitat de València, Spain

Poster 9 Title: Effect of Water Droplets on the Behaviour of Electric Field in Non-Uniform System using Silicon Rubber

Samira Benharat, University of sciences and technologies Houari Boumediene (USTHB), Algeria

Poster 10 Title: Core-Shell Type and Bi-Phasic Magnetic Nanoparticles for Biomedical ApplicationsA. S. Kamzin, Ioffe Physical-Technical Institute RAS, Russia

Poster 11 Title: Characterization of Co-doped TiO2 material prepared by molten-salt method and reactive sputtering

Bae-Heng Tseng, Department of Materials and Optoelectronic Science, National Sun Yat-Sen University, Taiwan

Poster 12 Title: Conductivity enhancement in polymeric composite functional materials using MOFs

Vicente Compañ, Universitat Politècnica de València, Spain

Poster 13 Title: Recycling of graphite from spent Li ion batteries for reuse in Li cells

Lucía Barbosa, Instituto de Investigaciones en Tecnología Química. Universidad Nacional de San Luis. San Luis (Argentina).


Poster 14 Title: Gas phase Oxidation of 3-methilpyridine by with “Green Oxidants”– N2O Nitrous Oxide (I)

Tofik Nagiev, Nagiev Institute of Catalysis and Inorganic Chemistry, National Academy of Sciences, Azerbaijani Republic

Poster 15 Title: Chemosensors based on imidazole moiety and their coordination complexes with bivalent metals

Violeta Mangalagiu, Alexandru Ioan Cuza University of Iasi, Faculty of Chemistry, Romania

Poster 16 Title: Selectivity of the iron (III) porphyrin catalyst in the monooxidation reaction of cyclohexane by hydrogen peroxide

Tofik Nagiev, Nagiev Institute of Catalysis and Inorganic Chemistry, National Academy of Sciences, Azerbaijani Republic

Poster 17 Title: 1,3-Diazolium ylides: an efficient way towards derivatives with multiple functions

Ionel I. Mangalagiu, Alexandru Ioan Cuza University of Iasi, Faculty of Chemistry, Romania

Poster 18 Title: Epoxy resin/graphite composites for fuel cells bipolar plates

Alina Madalina Darabut, Nanomaterials Group, Charles University, Czech Republic

Poster 19 Title: Investigation of platinum-based catalyst as cathode in proton exchange membrane fuel cell

Lucinda Blanco Redondo, Nanomaterials Group, Charles University, Czech Republic

Poster 20 Title: Study on the phase transformation pathway of iron sulfides

Yen-Hua Chen, Department of Earth Sciences, National Cheng Kung University, Taiwan

Poster 21 Title: Comparison of two optimization methods (Differential Evolution algorithm and neural network method) applied to the Inductor of Induction Cooking devices

A. Kansab, Laboratory L.G.E.E.R , University Hassiba BenBouali of Chlef – Algéria

world congress on functional...

Documents