workshop on calibration of machine tool

Upload: ayesha-irfan

Post on 27-Feb-2018

216 views

Category:

Documents


0 download

TRANSCRIPT

  • 7/25/2019 Workshop on Calibration of Machine Tool

    1/1

    Technology entre

    Indian Machine Tool Manufacturers Association

    Organised by

    BACKGROUND

    FOCUS AREAS

    REGISTRATION

    FACULTYOBJECTIVES

    PARTICIPANTS PROFILE

    PARTICIPANT FEE (Non - Residential)

    25 April 2012, Technology Centre, BIEC, Bangalore

    WORKSHOP ON

    Machine Tool Calibration is rapidly becoming an essential part of the manufacturing process with customers demanding higher accuracy from machine toolsfor handling precision parts with tighter tolerances. The ability of a machine tool to perform at its optimum level is largely based on the geometrical andpositioning accuracies of the machine slides and guideways. Machine tools are subject to positioning errors which might increase over a period of time due tonatural wear and tear or failing parts or worn out moving parts.

    Machine tool accuracy affects not only accuracy of parts produced but productivity as well and is often the root cause of component quality issues and hiddencosts. Machine Tool Calibration can be performed to check accuracy and track machine capability or performance degradation due to wear. In other words, itis a 'health-check' or 'condition-monitoring' of any machine tool. Periodic calibration helps identify potential problems with machine tools, such as badbearings, faulty servos, slip-stick conditions, and so on. Hence an early detection enables to schedule preventive maintenance and avoid unexpecteddowntime, especially during critical production runs.Thus calibration of machine tools becomes essential part of predictive maintenance programme incompanies to achieve Doing it right the first time.

    Indian Machine Tool Manufacturers Association (IMTMA) is organising a one day workshop on 'Calibration of CNC Machine Tools on 25 April 2012 atBangalore.

    Introduction to calibration ; The need and benefits of calibration.

    Accuracy, Repeatability and Resolution

    National and International standards for determining Positional accuracy and Repeatability of machine tools.

    Linear measurements - Linear scales, Laser interferometer : Principles of operation

    Rotary Measurement - Autocollimator, Laser rotary calibrator

    Laser Interferometer set up for calibration

    Ball Bar measurements

    Diagnosis of errors using graphs / plots obtained during calibration with case studies and examples.

    This Workshop will provide understanding of machine tool standards,procedures for machine tool calibration, interpreting results, machinetool positioning & accuracy and its impact on the manufacturing processcapability. There will be a combination of lectures and live demonstrationon CNC Turning Centres and Vertical Machining Centres for conductingcalibration tests.

    This training programme will be conducted by Mr. T. R. Kumaraswamy,B.E, M.Sc. in Machine Tool Engineering, an industry expert with over35 years of experience in Design, Manufacturing and Assembly of CNCMachines. He was Former Dy. General Manager, HMT Ltd. and hasindepth knowledge of Prototype evaluation and Assembly of MachiningCentres, Turning Centres, Wire EDMs and Commissioning of Robots.

    This workshop will benefit Managers, Engineers & Supervisors involved in the functions of Production, Manufacturing, CNC Maintenance, Machine tooldesign, Inspection and Testing, Assembly and Service.

    Fees includes participation, course material, working Lunch & Tea/Coffee. Companies interested in participation are requested to return the attachedReply form dully filled along with Demand Draft/ at par cheque in favour of Indian Machine Tool Manufacturers Association payable at Bangalore to theaddress mentioned in the reply form.

    Prior registration for participation is necessary.

    Number of participants is limited and will be accepted on First come First basis.

    A Certificate of participation will be issued to participants.

    Types of Organization

    IMTMA MEMBERS & SSI COMPANIES 3000/-

    3500/-

    371/-

    433/-

    3371/-

    3933/-NON MEMBERS COMPANIES(Large & Medium)

    Fees per participant Service tax (12.36%) Total Participation Fees

    For More Details Please Contact :

    Mr. Saeesh NayakE-mail : [email protected]

    @ Bangalore International Exhibition Center (BIEC)10th Mile, Tumkur Road, Madavara Post, Bangalore 562 123

    Tel : 080-6624 6761 / 6600 Fax : 080-6624 6658www.imtma.in

    INDIAN MACHINE TOOL MANUFACTURERS' ASSOCIATION

    IMTM A T ECHNO LOGY CENTR E PARTNERED BY

    Calibration of CNC Machine Tools