worksheet(s) – page 1
DESCRIPTION
Worksheet(s) – Page 1. User02. User01. srcN+1. srcN. TG Src MI. TG Src MI. Filter1. Filter1. Neighbor Rtr Meta-interface. Filter2. Filter2. dstN+1. TG Dst MI. TG Dst MI. dstN. We are going to list the parameters you will need for Building a new MI - PowerPoint PPT PresentationTRANSCRIPT
Worksheet(s) – Page 1
Neighbor Rtr Meta-interface
TG Src MI
TG Dst MI
Filter1
Filter2
TG Src MI
TG Dst MI
Filter1
Filter2
We are going to list the parameters you will need for Building a new MI Adding a filter to route traffic from your src to your neighbor’s dst Adding a filter to route traffic coming from your neighbor’s src to your dst.
srcN
dstN
srcN+1
dstN+1
User01 User02
Worksheet(s) – Page 2TG Src MI
TG Dst MI
Filter1
Filter2
TG Src MI
TG Dst MI
Filter1
Filter2
User01 MI to Neighbor My SPP: ____KANS___ Other SPP: ____WASH___ Link between SPPs:
» Look at “Current SPP Network” Slide!!!» My Addr: 10.1.3/4.1_______ (Arg0)» Other End Addr: ___10.1.3/4.2____
Pick a Port Number ___X____ (Arg1)» Do NOT use port #’s in range 32768-49151
User02 MI to Neighbor My SPP: ___WASH____ Other SPP: ____KANS___ Link between SPPs:
» Look at “Current SPP Network” Slide!!!» My Addr: ___10.1.3/4.2____ (Arg0)» Other End Addr: ___10.1.3/4.1____
Pick a Port Number ___Y____ (Arg1)» Do NOT use port #’s in range 32768-49151
srcN
dstN
srcN+1
dstN+1
User01 User02
Neighbor Rtr Meta-interface
Worksheet(s) – Page 3
Neighbor Rtr Meta-interface
TG Src MI
TG Dst MI
Filter1
Filter2
TG Src MI
TG Dst MI
Filter1
Filter2
User01 Filter1 Key DADDR (dstN+1):
» MN Dest Addr: __10.10.2.3___ (Arg2) MI to send pkts to: _Neighbor
» QID: ____>= 3_____ (Arg5)• We have already used 0, 1, 2 for other Mis.• Chose something else
» Addr on other end of MI: _10.1.3/4.2__ (Arg3)» Port on other end of MI: ____Y______ (Arg4)» Y from previous page UserN+1 “Pick a Port”
User02 Filter1 Key DADDR (dstN):
» MN Dest Addr: __10.10.1.3___ (Arg2) MI to send pkts to: _Neighbor
» QID: ___>= 3______ (Arg5)We have already used 0, 1, 2 for other Mis.Chose something else
» Addr on other end of MI: __10.1.3/4.1_ (Arg3)» Port on other end of MI: ____X______ (Arg4)» X from previous page UserN “Pick a Port”
srcN
dstN
srcN+1
dstN+1
User01 User02
Worksheet(s) – Page 4
Neighbor Rtr Meta-interface
TG Src MI
TG Dst MI
srcN
dstN
Filter1
Filter2
TG Src MI
TG Dst MI
Filter1
Filter2
User01 Filter2 Key DADDR (dstN):
» MN Dest Addr: __10.10.1.3___ (Arg6) MI to send pkts to: TG DST
» REUSE EXISTING VARIABLES!!!» QID: QID_DST_MI (Arg9)» Addr on other end of MI: HOST_TGDST_IPADDR(Arg7)» Port on other end of MI: HOST_TGDST_PORT(Arg8)
User02 Filter2 Key DADDR (dstN+1):
» MN Dest Addr: ___10.10.2.3__ (Arg6) MI to send pkts to: TG DST
» REUSE EXISTING VARIABLES!!!» QID: QID_DST_MI (Arg9)» Addr on other end of MI: HOST_TGDST_IPADDR(Arg7)» Port on other end of MI: HOST_TGDST_PORT(Arg8)
srcN+1
dstN+1
User01 User02
Worksheet(s) – Page 1
Neighbor Rtr Meta-interface
TG Src MI
TG Dst MI
Filter1
Filter2
TG Src MI
TG Dst MI
Filter1
Filter2
We are going to list the parameters you will need for Building a new MI Adding a filter to route traffic from your src to your neighbor’s dst Adding a filter to route traffic coming from your neighbor’s src to your dst.
srcN
dstN
srcN+1
dstN+1
User03 User04
Worksheet(s) – Page 2TG Src MI
TG Dst MI
Filter1
Filter2
TG Src MI
TG Dst MI
Filter1
Filter2
User03 MI to Neighbor My SPP: ____SALT___ Other SPP: ____KANS___ Link between SPPs:
» Look at “Current SPP Network” Slide!!!» My Addr: 10.1.1/2.1_______ (Arg0)» Other End Addr: ___10.1.1/2.2____
Pick a Port Number ___X____ (Arg1)» Do NOT use port #’s in range 32768-49151
User04 MI to Neighbor My SPP: ___KANS____ Other SPP: ____SALT___ Link between SPPs:
» Look at “Current SPP Network” Slide!!!» My Addr: ___10.1.1/2.2____ (Arg0)» Other End Addr: ___10.1.1/2.1____
Pick a Port Number ___Y____ (Arg1)» Do NOT use port #’s in range 32768-49151
srcN
dstN
srcN+1
dstN+1
User03 User04
Neighbor Rtr Meta-interface
Worksheet(s) – Page 3
Neighbor Rtr Meta-interface
TG Src MI
TG Dst MI
Filter1
Filter2
TG Src MI
TG Dst MI
Filter1
Filter2
User03 Filter1 Key DADDR (dstN+1):
» MN Dest Addr: __10.10.4.3___ (Arg2) MI to send pkts to: _Neighbor
» QID: ____>= 3_____ (Arg5)• We have already used 0, 1, 2 for other Mis.• Chose something else
» Addr on other end of MI: _10.1.1/2.2__ (Arg3)» Port on other end of MI: ____Y______ (Arg4)» Y from previous page UserN+1 “Pick a Port”
User04 Filter1 Key DADDR (dstN):
» MN Dest Addr: __10.10.3.3___ (Arg2) MI to send pkts to: _Neighbor
» QID: ___>= 3______ (Arg5)We have already used 0, 1, 2 for other Mis.Chose something else
» Addr on other end of MI: __10.1.1/2.1_ (Arg3)» Port on other end of MI: ____X______ (Arg4)» X from previous page UserN “Pick a Port”
srcN
dstN
srcN+1
dstN+1
User03 User04
Worksheet(s) – Page 4
Neighbor Rtr Meta-interface
TG Src MI
TG Dst MI
srcN
dstN
Filter1
Filter2
TG Src MI
TG Dst MI
Filter1
Filter2
User03 Filter2 Key DADDR (dstN):
» MN Dest Addr: __10.10.3.3___ (Arg6) MI to send pkts to: TG DST
» REUSE EXISTING VARIABLES!!!» QID: QID_DST_MI (Arg9)» Addr on other end of MI: HOST_TGDST_IPADDR(Arg7)» Port on other end of MI: HOST_TGDST_PORT(Arg8)
User04 Filter2 Key DADDR (dstN+1):
» MN Dest Addr: ___10.10.4.3__ (Arg6) MI to send pkts to: TG DST
» REUSE EXISTING VARIABLES!!!» QID: QID_DST_MI (Arg9)» Addr on other end of MI: HOST_TGDST_IPADDR(Arg7)» Port on other end of MI: HOST_TGDST_PORT(Arg8)
srcN+1
dstN+1
User03 User04
Worksheet(s) – Page 1
Neighbor Rtr Meta-interface
TG Src MI
TG Dst MI
Filter1
Filter2
TG Src MI
TG Dst MI
Filter1
Filter2
We are going to list the parameters you will need for Building a new MI Adding a filter to route traffic from your src to your neighbor’s dst Adding a filter to route traffic coming from your neighbor’s src to your dst.
srcN
dstN
srcN+1
dstN+1
User05 User06
Worksheet(s) – Page 2TG Src MI
TG Dst MI
Filter1
Filter2
TG Src MI
TG Dst MI
Filter1
Filter2
User05 MI to Neighbor My SPP: ____WASH___ Other SPP: ____SALT___ Link between SPPs:
» Look at “Current SPP Network” Slide!!!» My Addr: 10.1.7/8.1_______ (Arg0)» Other End Addr: ___10.1.7/8.2____
Pick a Port Number ___X____ (Arg1)» Do NOT use port #’s in range 32768-49151
User06 MI to Neighbor My SPP: ___SALT____ Other SPP: ____WASH___ Link between SPPs:
» Look at “Current SPP Network” Slide!!!» My Addr: ___10.1.7/8.2____ (Arg0)» Other End Addr: ___10.1.7/8.1____
Pick a Port Number ___Y____ (Arg1)» Do NOT use port #’s in range 32768-49151
srcN
dstN
srcN+1
dstN+1
User05 User06
Neighbor Rtr Meta-interface
Worksheet(s) – Page 3
Neighbor Rtr Meta-interface
TG Src MI
TG Dst MI
Filter1
Filter2
TG Src MI
TG Dst MI
Filter1
Filter2
User05 Filter1 Key DADDR (dstN+1):
» MN Dest Addr: __10.10.6.3___ (Arg2) MI to send pkts to: _Neighbor
» QID: ____>= 3_____ (Arg5)• We have already used 0, 1, 2 for other Mis.• Chose something else
» Addr on other end of MI: _10.1.7/8.2__ (Arg3)» Port on other end of MI: ____Y______ (Arg4)» Y from previous page UserN+1 “Pick a Port”
User06 Filter1 Key DADDR (dstN):
» MN Dest Addr: __10.10.5.3___ (Arg2) MI to send pkts to: _Neighbor
» QID: ___>= 3______ (Arg5)We have already used 0, 1, 2 for other Mis.Chose something else
» Addr on other end of MI: __10.1.7/8.1_ (Arg3)» Port on other end of MI: ____X______ (Arg4)» X from previous page UserN “Pick a Port”
srcN
dstN
srcN+1
dstN+1
User05 User06
Worksheet(s) – Page 4
Neighbor Rtr Meta-interface
TG Src MI
TG Dst MI
srcN
dstN
Filter1
Filter2
TG Src MI
TG Dst MI
Filter1
Filter2
User05 Filter2 Key DADDR (dstN):
» MN Dest Addr: __10.10.5.3___ (Arg6) MI to send pkts to: TG DST
» REUSE EXISTING VARIABLES!!!» QID: QID_DST_MI (Arg9)» Addr on other end of MI: HOST_TGDST_IPADDR(Arg7)» Port on other end of MI: HOST_TGDST_PORT(Arg8)
User06 Filter2 Key DADDR (dstN+1):
» MN Dest Addr: ___10.10.6.3__ (Arg6) MI to send pkts to: TG DST
» REUSE EXISTING VARIABLES!!!» QID: QID_DST_MI (Arg9)» Addr on other end of MI: HOST_TGDST_IPADDR(Arg7)» Port on other end of MI: HOST_TGDST_PORT(Arg8)
srcN+1
dstN+1
User05 User06
Worksheet(s) – Page 1
Neighbor Rtr Meta-interface
TG Src MI
TG Dst MI
Filter1
Filter2
TG Src MI
TG Dst MI
Filter1
Filter2
We are going to list the parameters you will need for Building a new MI Adding a filter to route traffic from your src to your neighbor’s dst Adding a filter to route traffic coming from your neighbor’s src to your dst.
srcN
dstN
srcN+1
dstN+1
User07 User08
Worksheet(s) – Page 2TG Src MI
TG Dst MI
Filter1
Filter2
TG Src MI
TG Dst MI
Filter1
Filter2
User07 MI to Neighbor My SPP: ____KANS___ Other SPP: ____WASH___ Link between SPPs:
» Look at “Current SPP Network” Slide!!!» My Addr: 10.1.3/4.1_______ (Arg0)» Other End Addr: ___10.1.3/4.2____
Pick a Port Number ___X____ (Arg1)» Do NOT use port #’s in range 32768-49151
User08 MI to Neighbor My SPP: ___WASH____ Other SPP: ____KANS___ Link between SPPs:
» Look at “Current SPP Network” Slide!!!» My Addr: ___10.1.3/4.2____ (Arg0)» Other End Addr: ___10.1.3/4.1____
Pick a Port Number ___Y____ (Arg1)» Do NOT use port #’s in range 32768-49151
srcN
dstN
srcN+1
dstN+1
User07 User08
Neighbor Rtr Meta-interface
Worksheet(s) – Page 3
Neighbor Rtr Meta-interface
TG Src MI
TG Dst MI
Filter1
Filter2
TG Src MI
TG Dst MI
Filter1
Filter2
User07 Filter1 Key DADDR (dstN+1):
» MN Dest Addr: __10.10.8.3___ (Arg2) MI to send pkts to: _Neighbor
» QID: ____>= 3_____ (Arg5)• We have already used 0, 1, 2 for other Mis.• Chose something else
» Addr on other end of MI: _10.1.3/4.2__ (Arg3)» Port on other end of MI: ____Y______ (Arg4)» Y from previous page UserN+1 “Pick a Port”
User08 Filter1 Key DADDR (dstN):
» MN Dest Addr: __10.10.7.3___ (Arg2) MI to send pkts to: _Neighbor
» QID: ___>= 3______ (Arg5)We have already used 0, 1, 2 for other Mis.Chose something else
» Addr on other end of MI: __10.1.3/4.1_ (Arg3)» Port on other end of MI: ____X______ (Arg4)» X from previous page UserN “Pick a Port”
srcN
dstN
srcN+1
dstN+1
User07 User08
Worksheet(s) – Page 4
Neighbor Rtr Meta-interface
TG Src MI
TG Dst MI
srcN
dstN
Filter1
Filter2
TG Src MI
TG Dst MI
Filter1
Filter2
User07 Filter2 Key DADDR (dstN):
» MN Dest Addr: __10.10.7.3___ (Arg6) MI to send pkts to: TG DST
» REUSE EXISTING VARIABLES!!!» QID: QID_DST_MI (Arg9)» Addr on other end of MI: HOST_TGDST_IPADDR(Arg7)» Port on other end of MI: HOST_TGDST_PORT(Arg8)
User08 Filter2 Key DADDR (dstN+1):
» MN Dest Addr: ___10.10.8.3__ (Arg6) MI to send pkts to: TG DST
» REUSE EXISTING VARIABLES!!!» QID: QID_DST_MI (Arg9)» Addr on other end of MI: HOST_TGDST_IPADDR(Arg7)» Port on other end of MI: HOST_TGDST_PORT(Arg8)
srcN+1
dstN+1
User07 User08
Worksheet(s) – Page 1
Neighbor Rtr Meta-interface
TG Src MI
TG Dst MI
Filter1
Filter2
TG Src MI
TG Dst MI
Filter1
Filter2
We are going to list the parameters you will need for Building a new MI Adding a filter to route traffic from your src to your neighbor’s dst Adding a filter to route traffic coming from your neighbor’s src to your dst.
srcN
dstN
srcN+1
dstN+1
User09 User10
Worksheet(s) – Page 2TG Src MI
TG Dst MI
Filter1
Filter2
TG Src MI
TG Dst MI
Filter1
Filter2
User09 MI to Neighbor My SPP: ____SALT___ Other SPP: ____KANS___ Link between SPPs:
» Look at “Current SPP Network” Slide!!!» My Addr: 10.1.1/2.1_______ (Arg0)» Other End Addr: ___10.1.1/2.2____
Pick a Port Number ___X____ (Arg1)» Do NOT use port #’s in range 32768-49151
User10 MI to Neighbor My SPP: ___KANS____ Other SPP: ____SALT___ Link between SPPs:
» Look at “Current SPP Network” Slide!!!» My Addr: ___10.1.1/2.2____ (Arg0)» Other End Addr: ___10.1.1/2.1____
Pick a Port Number ___Y____ (Arg1)» Do NOT use port #’s in range 32768-49151
srcN
dstN
srcN+1
dstN+1
User09 User10
Neighbor Rtr Meta-interface
Worksheet(s) – Page 3
Neighbor Rtr Meta-interface
TG Src MI
TG Dst MI
Filter1
Filter2
TG Src MI
TG Dst MI
Filter1
Filter2
User09 Filter1 Key DADDR (dstN+1):
» MN Dest Addr: __10.10.10.3___ (Arg2) MI to send pkts to: _Neighbor
» QID: ____>= 3_____ (Arg5)• We have already used 0, 1, 2 for other Mis.• Chose something else
» Addr on other end of MI: _10.1.1/2.2__ (Arg3)» Port on other end of MI: ____Y______ (Arg4)» Y from previous page UserN+1 “Pick a Port”
User10 Filter1 Key DADDR (dstN):
» MN Dest Addr: __10.10.9.3___ (Arg2) MI to send pkts to: _Neighbor
» QID: ___>= 3______ (Arg5)We have already used 0, 1, 2 for other Mis.Chose something else
» Addr on other end of MI: __10.1.1/2.1_ (Arg3)» Port on other end of MI: ____X______ (Arg4)» X from previous page UserN “Pick a Port”
srcN
dstN
srcN+1
dstN+1
User09 User10
Worksheet(s) – Page 4
Neighbor Rtr Meta-interface
TG Src MI
TG Dst MI
srcN
dstN
Filter1
Filter2
TG Src MI
TG Dst MI
Filter1
Filter2
User09 Filter2 Key DADDR (dstN):
» MN Dest Addr: __10.10.9.3___ (Arg6) MI to send pkts to: TG DST
» REUSE EXISTING VARIABLES!!!» QID: QID_DST_MI (Arg9)» Addr on other end of MI: HOST_TGDST_IPADDR(Arg7)» Port on other end of MI: HOST_TGDST_PORT(Arg8)
User10 Filter2 Key DADDR (dstN+1):
» MN Dest Addr: ___10.10.10.3__ (Arg6) MI to send pkts to: TG DST
» REUSE EXISTING VARIABLES!!!» QID: QID_DST_MI (Arg9)» Addr on other end of MI: HOST_TGDST_IPADDR(Arg7)» Port on other end of MI: HOST_TGDST_PORT(Arg8)
srcN+1
dstN+1
User09 User10
Worksheet(s) – Page 1
Neighbor Rtr Meta-interface
TG Src MI
TG Dst MI
Filter1
Filter2
TG Src MI
TG Dst MI
Filter1
Filter2
We are going to list the parameters you will need for Building a new MI Adding a filter to route traffic from your src to your neighbor’s dst Adding a filter to route traffic coming from your neighbor’s src to your dst.
srcN
dstN
srcN+1
dstN+1
User11 User12
Worksheet(s) – Page 2TG Src MI
TG Dst MI
Filter1
Filter2
TG Src MI
TG Dst MI
Filter1
Filter2
User11 MI to Neighbor My SPP: ____WASH___ Other SPP: ____SALT___ Link between SPPs:
» Look at “Current SPP Network” Slide!!!» My Addr: 10.1.7/8.1_______ (Arg0)» Other End Addr: ___10.1.7/8.2____
Pick a Port Number ___X____ (Arg1)» Do NOT use port #’s in range 32768-49151
User12 MI to Neighbor My SPP: ___SALT____ Other SPP: ____WASH___ Link between SPPs:
» Look at “Current SPP Network” Slide!!!» My Addr: ___10.1.7/8.2____ (Arg0)» Other End Addr: ___10.1.7/8.1____
Pick a Port Number ___Y____ (Arg1)» Do NOT use port #’s in range 32768-49151
srcN
dstN
srcN+1
dstN+1
User11 User12
Neighbor Rtr Meta-interface
Worksheet(s) – Page 3
Neighbor Rtr Meta-interface
TG Src MI
TG Dst MI
Filter1
Filter2
TG Src MI
TG Dst MI
Filter1
Filter2
User11 Filter1 Key DADDR (dstN+1):
» MN Dest Addr: __10.10.12.3___ (Arg2) MI to send pkts to: _Neighbor
» QID: ____>= 3_____ (Arg5)• We have already used 0, 1, 2 for other Mis.• Chose something else
» Addr on other end of MI: _10.1.7/8.2__ (Arg3)» Port on other end of MI: ____Y______ (Arg4)» Y from previous page UserN+1 “Pick a Port”
User12 Filter1 Key DADDR (dstN):
» MN Dest Addr: __10.10.11.3___ (Arg2) MI to send pkts to: _Neighbor
» QID: ___>= 3______ (Arg5)We have already used 0, 1, 2 for other Mis.Chose something else
» Addr on other end of MI: __10.1.7/8.1_ (Arg3)» Port on other end of MI: ____X______ (Arg4)» X from previous page UserN “Pick a Port”
srcN
dstN
srcN+1
dstN+1
User11 User12
Worksheet(s) – Page 4
Neighbor Rtr Meta-interface
TG Src MI
TG Dst MI
srcN
dstN
Filter1
Filter2
TG Src MI
TG Dst MI
Filter1
Filter2
User11 Filter2 Key DADDR (dstN):
» MN Dest Addr: __10.10.11.3___ (Arg6) MI to send pkts to: TG DST
» REUSE EXISTING VARIABLES!!!» QID: QID_DST_MI (Arg9)» Addr on other end of MI: HOST_TGDST_IPADDR(Arg7)» Port on other end of MI: HOST_TGDST_PORT(Arg8)
User12 Filter2 Key DADDR (dstN+1):
» MN Dest Addr: ___10.10.12.3__ (Arg6) MI to send pkts to: TG DST
» REUSE EXISTING VARIABLES!!!» QID: QID_DST_MI (Arg9)» Addr on other end of MI: HOST_TGDST_IPADDR(Arg7)» Port on other end of MI: HOST_TGDST_PORT(Arg8)
srcN+1
dstN+1
User11 User12
Worksheet(s) – Page 1
Neighbor Rtr Meta-interface
TG Src MI
TG Dst MI
Filter1
Filter2
TG Src MI
TG Dst MI
Filter1
Filter2
We are going to list the parameters you will need for Building a new MI Adding a filter to route traffic from your src to your neighbor’s dst Adding a filter to route traffic coming from your neighbor’s src to your dst.
srcN
dstN
srcN+1
dstN+1
User13 User14
Worksheet(s) – Page 2TG Src MI
TG Dst MI
Filter1
Filter2
TG Src MI
TG Dst MI
Filter1
Filter2
User13 MI to Neighbor My SPP: ____KANS___ Other SPP: ____WASH___ Link between SPPs:
» Look at “Current SPP Network” Slide!!!» My Addr: 10.1.3/4.1_______ (Arg0)» Other End Addr: ___10.1.3/4.2____
Pick a Port Number ___X____ (Arg1)» Do NOT use port #’s in range 32768-49151
User14 MI to Neighbor My SPP: ___WASH____ Other SPP: ____KANS___ Link between SPPs:
» Look at “Current SPP Network” Slide!!!» My Addr: ___10.1.3/4.2____ (Arg0)» Other End Addr: ___10.1.3/4.1____
Pick a Port Number ___Y____ (Arg1)» Do NOT use port #’s in range 32768-49151
srcN
dstN
srcN+1
dstN+1
User13 User14
Neighbor Rtr Meta-interface
Worksheet(s) – Page 3
Neighbor Rtr Meta-interface
TG Src MI
TG Dst MI
Filter1
Filter2
TG Src MI
TG Dst MI
Filter1
Filter2
User13 Filter1 Key DADDR (dstN+1):
» MN Dest Addr: __10.10.14.3___ (Arg2) MI to send pkts to: _Neighbor
» QID: ____>= 3_____ (Arg5)• We have already used 0, 1, 2 for other Mis.• Chose something else
» Addr on other end of MI: _10.1.3/4.2__ (Arg3)» Port on other end of MI: ____Y______ (Arg4)» Y from previous page UserN+1 “Pick a Port”
User14 Filter1 Key DADDR (dstN):
» MN Dest Addr: __10.10.13.3___ (Arg2) MI to send pkts to: _Neighbor
» QID: ___>= 3______ (Arg5)We have already used 0, 1, 2 for other Mis.Chose something else
» Addr on other end of MI: __10.1.3/4.1_ (Arg3)» Port on other end of MI: ____X______ (Arg4)» X from previous page UserN “Pick a Port”
srcN
dstN
srcN+1
dstN+1
User13 User14
Worksheet(s) – Page 4
Neighbor Rtr Meta-interface
TG Src MI
TG Dst MI
srcN
dstN
Filter1
Filter2
TG Src MI
TG Dst MI
Filter1
Filter2
User13 Filter2 Key DADDR (dstN):
» MN Dest Addr: __10.10.13.3___ (Arg6) MI to send pkts to: TG DST
» REUSE EXISTING VARIABLES!!!» QID: QID_DST_MI (Arg9)» Addr on other end of MI: HOST_TGDST_IPADDR(Arg7)» Port on other end of MI: HOST_TGDST_PORT(Arg8)
User14 Filter2 Key DADDR (dstN+1):
» MN Dest Addr: ___10.10.14.3__ (Arg6) MI to send pkts to: TG DST
» REUSE EXISTING VARIABLES!!!» QID: QID_DST_MI (Arg9)» Addr on other end of MI: HOST_TGDST_IPADDR(Arg7)» Port on other end of MI: HOST_TGDST_PORT(Arg8)
srcN+1
dstN+1
User13 User14
Worksheet(s) – Page 1
Neighbor Rtr Meta-interface
TG Src MI
TG Dst MI
Filter1
Filter2
TG Src MI
TG Dst MI
Filter1
Filter2
We are going to list the parameters you will need for Building a new MI Adding a filter to route traffic from your src to your neighbor’s dst Adding a filter to route traffic coming from your neighbor’s src to your dst.
srcN
dstN
srcN+1
dstN+1
User15 User16
Worksheet(s) – Page 2TG Src MI
TG Dst MI
Filter1
Filter2
TG Src MI
TG Dst MI
Filter1
Filter2
User15 MI to Neighbor My SPP: ____SALT___ Other SPP: ____KANS___ Link between SPPs:
» Look at “Current SPP Network” Slide!!!» My Addr: 10.1.1/2.1_______ (Arg0)» Other End Addr: ___10.1.1/2.2____
Pick a Port Number ___X____ (Arg1)» Do NOT use port #’s in range 32768-49151
User16 MI to Neighbor My SPP: ___KANS____ Other SPP: ____SALT___ Link between SPPs:
» Look at “Current SPP Network” Slide!!!» My Addr: ___10.1.1/2.2____ (Arg0)» Other End Addr: ___10.1.1/2.1____
Pick a Port Number ___Y____ (Arg1)» Do NOT use port #’s in range 32768-49151
srcN
dstN
srcN+1
dstN+1
User15 User16
Neighbor Rtr Meta-interface
Worksheet(s) – Page 3
Neighbor Rtr Meta-interface
TG Src MI
TG Dst MI
Filter1
Filter2
TG Src MI
TG Dst MI
Filter1
Filter2
User15 Filter1 Key DADDR (dstN+1):
» MN Dest Addr: __10.10.16.3___ (Arg2) MI to send pkts to: _Neighbor
» QID: ____>= 3_____ (Arg5)• We have already used 0, 1, 2 for other Mis.• Chose something else
» Addr on other end of MI: _10.1.1/2.2__ (Arg3)» Port on other end of MI: ____Y______ (Arg4)» Y from previous page UserN+1 “Pick a Port”
User16 Filter1 Key DADDR (dstN):
» MN Dest Addr: __10.10.15.3___ (Arg2) MI to send pkts to: _Neighbor
» QID: ___>= 3______ (Arg5)We have already used 0, 1, 2 for other Mis.Chose something else
» Addr on other end of MI: __10.1.1/2.1_ (Arg3)» Port on other end of MI: ____X______ (Arg4)» X from previous page UserN “Pick a Port”
srcN
dstN
srcN+1
dstN+1
User15 User16
Worksheet(s) – Page 4
Neighbor Rtr Meta-interface
TG Src MI
TG Dst MI
srcN
dstN
Filter1
Filter2
TG Src MI
TG Dst MI
Filter1
Filter2
User15 Filter2 Key DADDR (dstN):
» MN Dest Addr: __10.10.15.3___ (Arg6) MI to send pkts to: TG DST
» REUSE EXISTING VARIABLES!!!» QID: QID_DST_MI (Arg9)» Addr on other end of MI: HOST_TGDST_IPADDR(Arg7)» Port on other end of MI: HOST_TGDST_PORT(Arg8)
User16 Filter2 Key DADDR (dstN+1):
» MN Dest Addr: ___10.10.16.3__ (Arg6) MI to send pkts to: TG DST
» REUSE EXISTING VARIABLES!!!» QID: QID_DST_MI (Arg9)» Addr on other end of MI: HOST_TGDST_IPADDR(Arg7)» Port on other end of MI: HOST_TGDST_PORT(Arg8)
srcN+1
dstN+1
User15 User16
Worksheet(s) – Page 1
Neighbor Rtr Meta-interface
TG Src MI
TG Dst MI
Filter1
Filter2
TG Src MI
TG Dst MI
Filter1
Filter2
We are going to list the parameters you will need for Building a new MI Adding a filter to route traffic from your src to your neighbor’s dst Adding a filter to route traffic coming from your neighbor’s src to your dst.
srcN
dstN
srcN+1
dstN+1
User17 User18
Worksheet(s) – Page 2TG Src MI
TG Dst MI
Filter1
Filter2
TG Src MI
TG Dst MI
Filter1
Filter2
User17 MI to Neighbor My SPP: ____WASH___ Other SPP: ____SALT___ Link between SPPs:
» Look at “Current SPP Network” Slide!!!» My Addr: 10.1.7/8.1_______ (Arg0)» Other End Addr: ___10.1.7/8.2____
Pick a Port Number ___X____ (Arg1)» Do NOT use port #’s in range 32768-49151
User18 MI to Neighbor My SPP: ___SALT____ Other SPP: ____WASH___ Link between SPPs:
» Look at “Current SPP Network” Slide!!!» My Addr: ___10.1.7/8.2____ (Arg0)» Other End Addr: ___10.1.7/8.1____
Pick a Port Number ___Y____ (Arg1)» Do NOT use port #’s in range 32768-49151
srcN
dstN
srcN+1
dstN+1
User17 User18
Neighbor Rtr Meta-interface
Worksheet(s) – Page 3
Neighbor Rtr Meta-interface
TG Src MI
TG Dst MI
Filter1
Filter2
TG Src MI
TG Dst MI
Filter1
Filter2
User17 Filter1 Key DADDR (dstN+1):
» MN Dest Addr: __10.10.18.3___ (Arg2) MI to send pkts to: _Neighbor
» QID: ____>= 3_____ (Arg5)• We have already used 0, 1, 2 for other Mis.• Chose something else
» Addr on other end of MI: _10.1.7/8.2__ (Arg3)» Port on other end of MI: ____Y______ (Arg4)» Y from previous page UserN+1 “Pick a Port”
User18 Filter1 Key DADDR (dstN):
» MN Dest Addr: __10.10.17.3___ (Arg2) MI to send pkts to: _Neighbor
» QID: ___>= 3______ (Arg5)We have already used 0, 1, 2 for other Mis.Chose something else
» Addr on other end of MI: __10.1.7/8.1_ (Arg3)» Port on other end of MI: ____X______ (Arg4)» X from previous page UserN “Pick a Port”
srcN
dstN
srcN+1
dstN+1
User17 User18
Worksheet(s) – Page 4
Neighbor Rtr Meta-interface
TG Src MI
TG Dst MI
srcN
dstN
Filter1
Filter2
TG Src MI
TG Dst MI
Filter1
Filter2
User17 Filter2 Key DADDR (dstN):
» MN Dest Addr: __10.10.17.3___ (Arg6) MI to send pkts to: TG DST
» REUSE EXISTING VARIABLES!!!» QID: QID_DST_MI (Arg9)» Addr on other end of MI: HOST_TGDST_IPADDR(Arg7)» Port on other end of MI: HOST_TGDST_PORT(Arg8)
User18 Filter2 Key DADDR (dstN+1):
» MN Dest Addr: ___10.10.18.3__ (Arg6) MI to send pkts to: TG DST
» REUSE EXISTING VARIABLES!!!» QID: QID_DST_MI (Arg9)» Addr on other end of MI: HOST_TGDST_IPADDR(Arg7)» Port on other end of MI: HOST_TGDST_PORT(Arg8)
srcN+1
dstN+1
User17 User18
Worksheet(s) – Page 1
Neighbor Rtr Meta-interface
TG Src MI
TG Dst MI
Filter1
Filter2
TG Src MI
TG Dst MI
Filter1
Filter2
We are going to list the parameters you will need for Building a new MI Adding a filter to route traffic from your src to your neighbor’s dst Adding a filter to route traffic coming from your neighbor’s src to your dst.
srcN
dstN
srcN+1
dstN+1
User19 User20
Worksheet(s) – Page 2TG Src MI
TG Dst MI
Filter1
Filter2
TG Src MI
TG Dst MI
Filter1
Filter2
User19 MI to Neighbor My SPP: ____KANS___ Other SPP: ____WASH___ Link between SPPs:
» Look at “Current SPP Network” Slide!!!» My Addr: 10.1.3/4.1_______ (Arg0)» Other End Addr: ___10.1.3/4.2____
Pick a Port Number ___X____ (Arg1)» Do NOT use port #’s in range 32768-49151
User20 MI to Neighbor My SPP: ___WASH____ Other SPP: ____KANS___ Link between SPPs:
» Look at “Current SPP Network” Slide!!!» My Addr: ___10.1.3/4.2____ (Arg0)» Other End Addr: ___10.1.3/4.1____
Pick a Port Number ___Y____ (Arg1)» Do NOT use port #’s in range 32768-49151
srcN
dstN
srcN+1
dstN+1
User19 User20
Neighbor Rtr Meta-interface
Worksheet(s) – Page 3
Neighbor Rtr Meta-interface
TG Src MI
TG Dst MI
Filter1
Filter2
TG Src MI
TG Dst MI
Filter1
Filter2
User19 Filter1 Key DADDR (dstN+1):
» MN Dest Addr: __10.10.20.3___ (Arg2) MI to send pkts to: _Neighbor
» QID: ____>= 3_____ (Arg5)• We have already used 0, 1, 2 for other Mis.• Chose something else
» Addr on other end of MI: _10.1.3/4.2__ (Arg3)» Port on other end of MI: ____Y______ (Arg4)» Y from previous page UserN+1 “Pick a Port”
User20 Filter1 Key DADDR (dstN):
» MN Dest Addr: __10.10.19.3___ (Arg2) MI to send pkts to: _Neighbor
» QID: ___>= 3______ (Arg5)We have already used 0, 1, 2 for other Mis.Chose something else
» Addr on other end of MI: __10.1.3/4.1_ (Arg3)» Port on other end of MI: ____X______ (Arg4)» X from previous page UserN “Pick a Port”
srcN
dstN
srcN+1
dstN+1
User19 User20
Worksheet(s) – Page 4
Neighbor Rtr Meta-interface
TG Src MI
TG Dst MI
srcN
dstN
Filter1
Filter2
TG Src MI
TG Dst MI
Filter1
Filter2
User19 Filter2 Key DADDR (dstN):
» MN Dest Addr: __10.10.19.3___ (Arg6) MI to send pkts to: TG DST
» REUSE EXISTING VARIABLES!!!» QID: QID_DST_MI (Arg9)» Addr on other end of MI: HOST_TGDST_IPADDR(Arg7)» Port on other end of MI: HOST_TGDST_PORT(Arg8)
User20 Filter2 Key DADDR (dstN+1):
» MN Dest Addr: ___10.10.20.3__ (Arg6) MI to send pkts to: TG DST
» REUSE EXISTING VARIABLES!!!» QID: QID_DST_MI (Arg9)» Addr on other end of MI: HOST_TGDST_IPADDR(Arg7)» Port on other end of MI: HOST_TGDST_PORT(Arg8)
srcN+1
dstN+1
User19 User20