working height of 18.1 m side reach of 11.7 m platform
TRANSCRIPT
TA55
1300 1ALTECwww.altecaus.com.au
TA55Insulated Aerial Device
Working Height of 18.1 mSide Reach of 11.7 m
Platform Capacity of 300 kgMaterial handling capacity of 450 kg
Articulated Telescopic Aerial Device
TA55
STANDARD FEATURES
• Material Handling Jib Capacity up to 450kg• 300kg Platform Capacity regardless of Jib Capacity• 180˚ Platform Rotator (No SWL Reduction)• AS1418.10, 66kv/33kv• Platform, 610mm x 1219mm x 1067mm Nominal• Platform Access from the Ground• Altec ISO-Grip® System• No Major Preventive Maintenance• Lifetime Structural Warranty• Articulated Telescopic Aerial Device• Continuous Rotation• Remote Engine Start/Stop• Secondary Stowage System• Articulating Arm Provides Upper Boom Compensation• Fully Metered Single Handle Upper Control• Two Hydraulic Tool Circuits at Platform• Designed in ISO9001 Certified Facility• Outrigger Boom Interlock System• Outrigger Motion Alarm• Powder Coated Steel Structures• Diagnostic Pressure Test Points
RECOMMENDED FEATURES
• Fall protection system • Platform Liner• Wheel Chocks • Outrigger Pads
REACH DIAGRAM
Altec Australia Holdings Pty Ltd, 44-50 Gaine Rd, Dandenong South Victoria 3175 | 1300 1ALTEC | www.altecaus.com.au
OPTIONS
• Continuous Rotation• Secondary Stowage Systems• Engine Start/Stop• Tool Circuit at Tailshelf• Outriggers, Vertical• Additional Platform Capacity
GENERAL SPECIFICATIONSS tandard Features• Altec ISO-Grip ® System • Telescopic/Articulated Aerial Device • Hydraulic Boom Extension • Hydraulic Pltform Levelling • Insulated, ANSI Category C, 46kv and below • AS1418.10, 33kv/33kv • Noncontinuous Rotation • Platform, 610mm x 610mm x 1067mm Nominal • Platform Capacity – 159kg �xed 159kg w/rotator • Fully Metered Single Handle Upper Control • Full Pressure, Open Centre Hydraulic System • Platform Access from the Ground • Emergency Lowering Valve • Tool Circuit at Platform • Outrigger Boom Interlock System (With Outrigger Option) • Outrigger Motion Alarm (With Outrigger Option) • Back-up Alarm
SINGLE MAN OPERATION
180° PLATFORM ROTATOR
A LTEC ISO -G RIP ®
LIFETIME STRUCTURAL WARRANTY
180 ° Platform Rotator
Ground to Bottom of Platform * 9.3m (At Distance from Centreline) 1.2m
Maximum Reach End-Mount 7.2m Side-Mount 6.6m (@ Platform Height) 1.9m
Stowed Travel Height 3.2m
Boom Articulation -13.5° to +80°
Rotation Noncontinuous 370°
Weight of Unit 747kg
G eneral S peci�cations
* Varies depending on Chassis Frame Height
R each Diagram
www.altec.com
REF: DC/01 OCT 2010
Disclaimer: Users of the VEMCO Group’s services and/or information within this document must make their own assessment for suitability for their particular circumstances. Kindly contact VEMCO Group Design & Construction teal for all your project related services or if any more information required on this case study.
VEGETATION MANAGEMENT DESIGN & CONSTRUCTION ENVIRONMENTAL MANAGEMENT SPECIALITY FLEET SOLUTION TOOLS & EQUIPMENT
Vemco Group | Building 2 Level 3, 18 Compark Circuit Mulgrave VIC 3170 | PO Box 478 Mt Waverley VIC 3149 Tel: +(613) 8542 0700 Fax: +(613) 8542 0703 | Email: [email protected] | www.vemco.com.au
Vemco Group is the authorised Australian distributor of Altec
products.
ISO-Grip ® Control
Options • Continuous Rotation • Secondary Stowage System • Engine Start/Stop • Tool Circuit at Tailshelf • Outriggers, Vertical • Platform, 610 x 762 x 1067
• Additional Platform Capacity • Platform Cover • Platform Rotator – 90° or 180° • 181kg Fixed • 181kg Fixed Rotation
R ecommended Features • Fall protection System • Platform Liner • Wheel Chocks
• With Outrigger Option: Outrigger pads
180 degree platform rotator Iso-Grip Control
For more complete information on Altec products and services, visit us on www.altecaus.com. Material and specifications are subject to change without notice. Featured units in photos may include optional features. Please contact an Altec representative for all available options. Altec® and the Altec logo are registered trademarks of Altec Inc. in the United States and various other countries and may not be used without permission.© 2015 Altec Inc. All Rights Reserved. AAH.BR.AL16.4
TWO MAN OPERATION
180° PLATFORM ROTATOR
LIFETIME STRUCTURAL WARRANTY
300kg PLATFORM CAPACITY
A L T E C | A L T E C . C o m
• Platform Cover• Platform Rotator -90° or 180°• Platform, 610 x 762 x 1067• Tool box and cupboards made to order
Ground to Bottom of Platform 16.5 mMaximum Reach End-Mount 11.7 m(@ Platform Height) 6.9 mStowed Travel Height 3.5 mBoom Articulation Lower Boom -25˚ to +75˚Upper Boom -0˚ to +92.5˚Rotation Continuous*Varies depending on Chassis Frame Height