wooden visiting card - xplora · your visiting-card to look like. saw the piece of plywood in the...

1
W hat do you ne e d ? W h at do you have to do? Make a draft on paper of how you would like your visiting-card to look like. Saw the piece of plywood in the right form. Of the remaining plywood, you make the forms you wish possibly with a jigsaw. Nicely sand the wood on all sides. In upper side of your visiting card, you make two holes with the gimlet. 1. 2. 3. 4. Screw the eye screws in the holes. With the electric wood burning tool you can burn your name, date of birth in the wood. Ready! If you wish, you can paint or varnish your visiting card. 5. 6. 7. Wooden visiting card Materials Pieces of wood 2 eye screws Paper Sanding paper Wood glue Plywood of 10 by 10 cm Tools Electric wood saw Jigsaw Pencil Wood file Gimlet 3 mm Electric wood burning tool Technopolis ® •Technologielaan • 2800 Mechelen • Belgium Tel. +32 15 34 20 00 • Fax +32 15 34 20 01 E-mail: [email protected] • www.technopolis.be

Upload: others

Post on 06-Jun-2020

2 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: Wooden visiting card - Xplora · your visiting-card to look like. Saw the piece of plywood in the right form. Of the remaining plywood, you make the forms you wish possibly with a

What do you need?

What do you have to do? Makeadraftonpaperofhowyouwouldlike

yourvisiting-cardtolooklike.

Sawthepieceofplywoodintherightform.Oftheremainingplywood,youmaketheformsyouwishpossiblywithajigsaw.

Nicelysandthewoodonallsides.

Inuppersideofyourvisitingcard,youmaketwoholeswiththegimlet.

1.

2.

3.

4.

Screwtheeyescrewsintheholes.

Withtheelectricwoodburningtoolyoucanburnyourname,dateofbirthinthewood.

Ready!Ifyouwish,youcanpaintorvarnishyourvisitingcard.

5.

6.

7.

Wooden visiting card

MaterialsPiecesofwood•2eyescrews•Paper•Sandingpaper•Woodglue•Plywoodof10by10cm•

ToolsElectricwoodsaw•Jigsaw•Pencil•Woodfile•Gimlet3mm•Electricwoodburningtool•

Technopolis®•Technologielaan•2800Mechelen•BelgiumTel.+3215342000•Fax+3215342001E-mail:[email protected]•www.technopolis.be