wireless lighting control system · lighting’s extensive fixture offering compatible with...
TRANSCRIPT
Wireless Lighting Control System
Patient Rooms and Healthcare
|2 pathwaylighting.com
PathWave Advanced Features and Benefits:
Two-way Wireless CommunicationA fixture-based relay communicates wirelessly with an occupancy sensor, one or more rocker switches, or both. The relay receives dimming control commands, which it then translates into 0-10V analog dimming signals for the LED driver.
BenefitWirelessly controls virtually any fixture that uses 0-10V dimming LED driver, without the added labor and material costs associated with additional wiring.
Self-powered Rocker SwitchLow-profile single or double rocker switch provides wireless control, and requires no electricity or battery power, to remotely power on/off or dim lighting in any space.
BenefitNo additional power required means reduced operating costs and a more environmentally friendly solution. Wireless technology enables mounting or storing the switch wherever convenient.
Easy On-site System Set UpAssociate one or more rocker switches to a single fixture or a group of fixtures, establish fixture groupings, or set up system parameters, using a PC and an optional USB programming dongle with the PathWave Software Application.
BenefitSystem set up is easy and takes minutes to complete. It is future-proof – should changes in the way the space is used in the future require new fixture groupings, or new switches need to be added, the system can be reprogrammed at any time – all without the need for fixture rewiring, running additional wires or disrupting occupancy.
Introducing PathWave — an EnOcean-based wireless lighting control system that lets you remotely power on/off or dim any* of Pathway Lighting’s fixtures that use 0-10V dimming.
*The following fixtures are not available with PathWave: Wall Cylinders, 4IC Series, 6IC Series, A4 Series and A6 Series. PathWave relay will be located in the canopy for Cylinder and Solerio products.
Save Energy While Boosting Workplace Satisfaction and Productivity
Studies show that the use of wireless lighting controls and occupancy sensors can help reduce lighting energy consumption by 30-45%.+
It has been demonstrated that providing personal control that allows individuals to establish their preferred light level in their workspace can result in higher job satisfaction and productivity.++
PathWave can help make spaces easier to use and your occupants more productive – at a touch of a button – all while reducing operating and turnover costs and saving energy.
Sources:+Lighting Controls Association; Lawrence Berkeley National Laboratory; Seattle Lighting Design Lab and California Energy Commission++Lighting Controls Association
PathWave is Available with the Following Fixture Types:
Round Downlights, Adjustable Accents and Wall Wash
Square Downlights, Adjustable Accents and Wall Wash
Surface- and Pendant-mounted Cylinders
Decorative Pendants
|3
PathWave can be configured in a number of ways, including:
1.One PathWave relay is installed in a group of fixtures†
Benefit: Allows for simultaneous control of all fixtures and lower system costs.
Fixture with PathWave
1Unswitched AC Power
Switched Power 0-10V dimming
4
†Maximum total number of fixtures allowed in this setup is 12. Please see product manual for details.
2.One PathWave relay is installed in each fixture
Benefit: Enables independent on/off and dimming control of each fixture.
Fixture with PathWave
Unswitched AC Power
Fixture with PathWave
Unswitched AC Power
Fixture with PathWave
Unswitched AC Power
Fixture with PathWave
Unswitched AC Power
Fixture with PathWave
Unswitched AC Power
Fixture with PathWave
Unswitched AC Power
Facility managers or individual users can set up one or up to a maximum combined total of 30 rocker switches and occupancy sensors to control the fixtures in this configuration.
Facility managers or individual users can control the fixtures in this configuration in many ways, including:• using a single rocker switch to
control all fixtures• using a separate rocker switch for
each fixture• using multiple rocker switches to
control each fixture• using multiple rocker switches to
control one or more fixture groups
Fixture with PathWave
Unswitched AC Power
Fixture with PathWave
1Unswitched AC Power
Switched Power 0-10V dimming
4
Fixture with PathWave
Unswitched AC Power
Fixture with PathWave
1Unswitched AC Power
Switched Power 0-10V dimming
4
|4
PathWave RelayPWV
Single Rocker SwitchPWVRS1
Double Rocker SwitchPWVRS2
Ceiling-mounted Wireless and Solar-Powered PIR Occupancy SensorPWVOSC
Wall-mounted Wireless and Solar-Powered Passive Infrared (PIR) Occupancy SensorPWVOSW
PathWave System Components:
|5
Pathway Lighting Products, Inc.P.O. Box 591, Old Saybrook, CT 06475-0591voice: 800.342.0592 or 860.388.6881fax: 800.207.0090 or 860.388.5766email: [email protected] BRPW0116
Learn MoreOur knowledgeable team is always ready to help.
For technical support, assistance with your PathWave order, or to receive information regarding system start-up support, process and rates, please contact Pathway Lighting.
For complete technical and ordering information, see PathWave specification sheet and user manual available online.
Suitable Applications
Classrooms and Lecture Halls Common Rooms
Open and Private Offices Patient Rooms and HealthcareCorporate Meeting and Event Spaces
Two easy ways to see Pathway Lighting’s extensive fixture offering compatible with PathWave Wireless Lighting Control System:
1. Go to www.pathwaylighting.com and type ‘PathWave’ in the keyword search bar.
PathWave
2. Use the Product Search tool online and select ‘PathWave Wireless’ within the Special Applications search filter. Special Applications
Air Tight DownlightsDMX TranslatorEnergy StarFlush Micro Trim
Flange (NF)Healthcare LightingIC Rated DownlightsMRI Non-Ferrous
DownlightsPathwave WirelessPlenum Rated
Conference Rooms