Wireless Light Sensor User Manual

1

Copyright notation ©2011 Nanjing IOT Sensor Technology Co., Ltd All Rights Reserved.

Wulian, are the trademarks and registered trademarks of Nanjing IOT Sensor Technology Co., Ltd. The other products mentioned in this article or company names may be the trademark or trade name of their respective owners.

Before installing and using the products, please read user manual carefully, which will help you use the products better. The pictures in the manual are just for your information. If some pictures are different from material object, the material object is final. The content in the manual is protected by copyright law legislator. It strictly prohibits any forms of copying, passing, distributing and storing any content of the manual without prior, written, consent of the instructor of Nanjing IOT Sensor Technology Co., Ltd. When using, if the practical situation of the product is different from that in the manual, or if you want to get more information, or you have any questions or ideas, please contact us as below: Service telephone: +86-25-5226 9091 Service website: http://www.wulian.cc/english/

Wireless Light Sensor User Manual

2

Ⅰ. Product Introduction WL-ID-01 Wireless Light Sensor is a new product based on ZigBee wireless transmission technology design. It is mainly used for detecting light intensity of the environment and can send out automatic regulation command according to light intensity and pre-set parameter.

It is widely applied to smart home, wisdom hotel, intelligent building and intelligent agriculture to detect light intensity of the environment in real time, generating real time data and sending the data to monitor platform or system center.

Ⅱ. Features

Support ZigBee HA protocol ZigBee device type: Terminal There is no need of any wiring and installation is simple High sensitivity and the operation is steady and reliable Exquisite and elegant appearance Super long time power supply, energy saving and environmentally friendly Support ceiling mounting and hung mounting etc.

Wireless Light Sensor User Manual

3

Ⅲ. Function illustration

Multi-function key LED light

Light induction area

Base

Pin bolt

Wireless Light Sensor User Manual

4

Ⅳ. Installation Steps

(1) The product can be placed directly on a fixed platform for using, it is flexible and convenient.

(2) The product can be also placed at a fixed position for using.

a) Insert the【pin bolt】into a fixed groove of the base;

Wireless Light Sensor User Manual

5

b) Use the【Expansion screws】to fasten the【Base】;

c) Fold the【Main body】on the【Pin bolt】;

Wireless Light Sensor User Manual

6

d) Adjust the angle and complete.

Ⅴ. Application Method 1. Network Connection Setup (1) Load two AA batteries;

Wireless Light Sensor User Manual

7

(2) Quick click【Multi-function key】4 times (Interval time of each click should be within 1 second) to join ZigBee network;

(3) After succeed joining ZigBee network, device can be carried out relevant configuration within 10 minutes as default, then enters further POLL;

(4) If reconfiguration is needed, quick click【Multi-function key】one time, device will restore to configuration status for 10 minutes;

(Note: The function is optional)

After joining ZigBee network, green LED light is constant on 2 seconds and then goes out.

Wireless Light Sensor User Manual

8

(5) Long pressing【Multi-function key】10 seconds to restore to the factory settings.

(Restoring to factory settings as default of non-joining ZigBee network)

Green LED flickers 4 times continuously

Wireless Light Sensor User Manual

9

2. Software Download (1) Please select corresponding operating software according to various

mobile intelligent terminal: a) Android users can search “wulian” or “smart home” in “Google Play

Store”, select “smart home” software and download it;

b) iPad, iPhone users can search “wulian” or “smart home” in “APP Store”, select “smart home” software and download it;

c) Users can also download the software from our official website.

Download site：http://www.wulian.cc/english/. (2) Please carry on installation and operation according to the software

prompting of each version;

(3) Enter the setting and using stage when installation is completed; (4) According to the users’ needs, the product also supports computer operation.

3. How to use (1) User can set the device via mobile intelligent terminal. Please refer to the application method of each version for specific operations; (2) After setup finished, user can synchronously receive data information of the Wireless Light Sensor at anytime and anywhere via various mobile intelligent terminal.

Wireless Light Sensor User Manual

10

Ⅶ. Notes About the installation When using the product for the first time, please read user manual of the product before installation.

About the cleaning The product should be installed at a dry and clean place to avoid components inside getting wet or other sundries. Please use a fine cloth to wipe the dust on the surface. Don’t use corrosive cleaning fluid or other chemical solvent.

About the storage The box of the packaged products should be placed at a ventilated, dry place and the place without corrosive gases. Stack layer shouldn’t exceed ten layers, warehouse temperature should be within -10℃～

+40℃, humidity ≤75%.

About the transportation The box of the packaged product can be transported by any vehicle if it is avoided the direct influence of the rain, snow or sudden force etc.

About the battery Before using the product, please install the battery first. Pay attention to the anode and cathode during the installation and don’t assemble it reversely. Suggest using the battery with high power capacity.

About the after sale service If product breaks down, non-professionals shouldn’t open it and it should be sent to local maintenance station to maintain or you can directly contact with our customer service department.

Wireless Light Sensor User Manual

11

Ⅷ. Product Specification Weight 153g

Net weight 120g

Color Multiple colors available

Ⅸ. Products in Package Component Qty

Main part of the Wireless Light Sensor 1

Pin bolt 1

Base 1

User manual 1

Expansion screw 4

Ⅹ.Ordering Information

Art. No WLPN1110189

Model WL-ID-01

Package size 138×118×68mm