Contact Azur, SARL au capital de 200 000 euros, APE 2931 Z– SIRET : 328 397 559 00050 –RCS GRASSE B 328 397 559, n° TVA intracommunautaire / n° IC : FR64 328 297 5591ère avenue, 1ère rue, ZI de Carros - BP 378, 06514 Carros – email : infos@contact-azur.com – Tél : + 33 (0)4 93 27 00 70

Wire harnesses manufacturer

• For more than 30 years, Contact Azur is recognized for his know-how in di�erent areas:

- cutting, stripping, crimping, micro-crimping, overmolding

- realization of our own tools for gauged crimping guaranteeing quality, �exibility and cost optimization - stamping speci�c contact

- realization of molds according to speci�cations

- manufacture of electrical wiring and connectors: �at cables, multi-conductors wires

- manufacture of complex wire harnesses

- protection of cables and wire harnesses : mouting sleeves, shrink sleeves, mechanical protections in plastic or steel...

• Realization of prototypes

• A high performance machineries for productions of small, medium and large series

• Expertise and resources to serve your needs:

- 3 engineers

- CAD software "Creo Parametric"

- A quali�ed production team

- Maintenance, quality, customer relashionship departments

Generation 2

New premises, new offer,

new ambitions!

Industrial servicesStudies & Production

• Cutting, stripping and multi-conductors cables processing

Multi-conductors wires

• Electrical contact manufacturing (small batch) to specific connectors• Use of brass and copper metals, the raw products or the treaties

Stamping specific contact

Overmolding

• Overmolding of electrical connectors on cables adapted to medium or large series• Range of common plastics (PA6, PA6.6, PBT...), and plastic for specific applications with highest specifications (superior heat resistance above 350°C, mechanical stength, ...)• Sealing and safety advanges for molded connectors

Cutting, cables preparation, stripping, crimping

• Cutting of wires from a few millimeters to 15 m• Wire stripping • Cut back: insulation exceeds conductor• Stripping of outer sleeves• Sliding of insulation• Microcrimping and crimping from small to large sections• Production capacity: 1000-1500 wires/h (wire ≈ 1m)

• Cutting flat cables according to clients specifications• Straight cutting, notching, stripping• Assembly of all types of conductors• Connectors setting up• High production capacity: 1000 parts/h

Flat cablesLeader in France

• Assembly of simple or complex test harnesses• Manual or semi-automatic installation, depending on the types of housings• Control of the test harnesses realization from the beginning to the end

Complex harnesses

Examples of applications

Industrial servicesStudies and Production

Test harnesses for car sharing integration kits (PSA, Renault)

in collaboration with

Connection of electronic cards

Test harnesses for automotive diagnostic

Test harnesses for truck cabin - OEM

Signal test harnesses for road signs

Detection of brake pads wear

RJ45 connection

Flat cable multi-connectors for rack computer

Positioning and protection of ferrites

Wifi antenna for home automation

Doubling connectioncircuit breaker

Contact Azur, SARL au capital de 200 000 euros, APE 2931 Z– SIRET : 328 397 559 00050 –RCS GRASSE B 328 397 559, n° TVA intracommunautaire / n° IC : FR64 328 297 5591ère avenue, 1ère rue, ZI de Carros - BP 378, 06514 Carros – email : infos@contact-azur.com – Tél : + 33 (0)4 93 27 00 70

Machineries

• 1 equipped metrology desk• 1 compression test machine ADAMEL type DY21 • 1 test station CABLESCAN• 1 profile projector• Various measuring and controlling tools adapted to our harnesses

Test equipment

Cable processing equipment• 2 controllers KOMAX 40 S processing both ends of threads (1+1 workstation)• 2 controllers KOMAX 42 processing both ends of threads (1+4 workstation)• 1 controller KOMAX 411 processing both ends of threads (1+2 workstation)• 1 controller KOMAX 422 processing both ends of threads (1 time 2 workstation)• 2 controller KOMAX 31 processing standards and flat cables• 3 controller KOMAX 28 notching flat cables• 2 cutting and stripping machine KOMAX 33 (small and medium cuts)• 1 cutting and stripping machine KOMAX 34• 2 machines SCHLEUNIGER COAX 8015 to deal with coaxial cables• 1 crimping machine STOCKO for connectors with insulation displacement• 20 semi-automatic crimping machine (AMP-CONNECTRAL-KIRSTEN-MOLEX-MECATRACTION)• 2 crimping machine PRONER for insulated connections• 3 crimping machine ANSLEY for flat cables• 100 crimp connections applications• 1 ultrasonic welding equipment RINCO MP 201• 1 oven MPC• 10 workstations of various activities (cutting, stripping, welding, ...)

Machines - Tools• Our workshop studio allows us to create and repair complex mold and tools quickly

Vertical overmolding machines

• 2 pneumatic presses• 5 spiral presses• 3 hydraulic presses• Desiccation system and automated material distribution

(10 to 40T)