wire and cable type tw - centelsa · wire and cable type tw 600v (international system units)...

6

Description

Soft copper conductor, PVC insulated.

Construction

ConductorSolid or compressed strand soft copper

InsulationPolyvinyl Chloride (PVC 60° C), flame retardant

Options

Available upon request, TW-LS (Low Smoke emission), TW-SR(Sunlight Resistant) and with insulation Gasoline and Oil resistantG&O (different types and grades of resistance to oil and gasoline)

Characteristics

Operating TemperatureDry Locations 60° C.Wet Locations 60° C

Operating Voltage600 V.

Applications

TW cables and wires are used generally in building wiring, feederand branch circuits, and internal secondary industrial distribution.

Installation: in ducts tubing and boards; raceways for 1/0 AWG andgreater sizes, according to NEC and NTC 2050 standards.

Wire and Cable Type TWThermoplastic Insulation, Suitable for Wet Locations

7

Standards

CENTELSA TW wires and cables are manufactured under the followingstandards:

ASTM B3, NTC 359. Soft copper wire.ASTM B8, NTC 307. Concentric Lay Stranded copper conductors.ASTM B787. 19 Wire Combination Unilay Stranded Copper conductors forsubsequent insulation.UL 1581, NTC-3203. Reference Standard for Electrical Wires, Cables andFlexible Cords.UL 83, NTC-1332. Thermoplastic insulated Wires and Cables.

Certifications

CENTELSA TW Wires and Cables are certified by:

UL 83. File E206516.ICONTEC (Colombia). Standard NTC 1332.CIDET (Colombia). Cert. No. 00406.LAPEM (Mexico). CFE E0000-06.FONDONORMA (Venezuela). NORVEN 364 (Standard COVENIN 397).

ColorsSizes 14 to 8 AWG: black, white, red, green, yellow, blue. Sizes 4 AWG andgreater: black.

PackagingSizes 14 to 8 AWG: 100 m spools covered with plastic thermo pack, in corrugatedcarton boxes. Sizes 6 to 4/0 AWG: 1000 m reels.Sizes 250 to 500 kcmil: 500 m reels.

Note: Other configurations, sizes, colors and length not specified herein areavailable upon request.

Wire and Cable Type TW 600V (International System Units)Thermoplastic Insulation, Suitable for Wet Locations (60°C)

Standard: UL 83, NTC 1332. Thermoplastic insulated Wires and Cables.

Notes: 1. DC resistance calculated based on a 17.241 ohm-mm2/km resistivity for cooper.2. 60°C conductor temperature, 30°C ambient temperature, According to NEC and NTC 2050, for sizes 14 12 and 10 AWG overload protection must be 15, 20 and 30 A.3. One single conductor at free air at 30°C ambient temperature.4. No more than three current carrying conductors in a duct or in direct burial, 30°C ambient temperature.5. According to NEC NTC 2050 the minimun size for use in Tray Cables must be 1/0 AWG for phase conductors, and 4 AWG for grounding

conductors.6. Data herein indicated are approximated and are subject to normal manuracturing tolerances.

STRANDSNo.

SIZEAWG /kcmil

STRANDINGCLASS

SECTION(mm2)

CONDUCTORDIAMETER

(mm)

INSULATIONTHICKNESS

(mm)

INSULATIONDIAMETER

(mm)

DCRESISTANCE

AT 20°C 1(ohm/km)

APPROX.TOTAL

WEIGTH (kg/km)

AMPACITY 2

(A) 3AMPACITY 2

(A) 4

1.632.052.593.264.125.191.792.252.853.594.525.717.207.908.889.96

11.1912.5614.1815.5216.7817.9420.0422.0023.7524.5925.3926.9428.38

1111117777777

19191919193737373737616161616161

141210

864

141210

86421

1/02/03/04/0

250300350400500600700750800900

1000

SolidSolidSolidSolidSolidSolid

BBBBBBBBBBBBBBBBBBBBBBB

2.083.315.268.37

13.3021.15

2.083.315.268.37

13.3021.1533.6342.4153.4867.4385.03107.2126.7152.0177.3202.7253.4304.0354.7380.0405.4456.0506.7

3.233.654.195.647.298.363.393.854.455.977.698.88

10.3712.0813.0614.1515.3716.7519.1520.4921.7522.9125.0127.7529.5030.3531.1532.7034.14

0.760.760.761.141.521.520.760.760.761.141.521.521.522.032.032.032.032.032.412.412.412.412.412.792.792.792.792.792.79

27405999

160237

294262

104168250377484595733906

112313481595184120862573310235873829407145545035

2530406080

1052530406080

105140165195225260300340375420455515575630655680730780

8.295.213.282.061.30

0.8158.455.313.342.101.32

0.8310.5230.4150.3290.2610.2070.1640.1390.116

0.09920.08680.06940.05780.04960.04630.04340.03860.0347

20253040557020253040557095

110125145165195215240260280320355385400410435455

8

Notes: 1. DC resistance calculated based on a 10.371 ohm-cmil/ft resistivity for cooper.2. 60°C conductor temperature, 30°C ambient temperature, According to NEC and NTC 2050, for sizes 14 12 and 10 AWG overload protection must be 15, 20 and 30 A.3. One single conductor at free air at 30°C ambient temperature.4. No more than three current carrying conductors in a duct or in direct burial, 30°C ambient temperature.5. According to NEC NTC 2050 the minimun size for use in Tray Cables must be 1/0 AWG for phase conductors, and 4 AWG for grounding


Wire and Cable Type TW 600VThermoplastic Insulation, Suitable for Wet Locations (60°C)


6481

102128162204

7089

112141178225283311349392440494558611661706789866935968

100010611117

1111117777777

19191919193737373737616161616161

141210

864

141210

86421

1/02/03/04/0

250300350400500600700750800900

1000



0.003230.005130.00815

0.01300.02060.0328

0.003230.005130.00815

0.01300.02060.03280.05210.06570.0829

0.1050.1320.1660.1960.2360.2750.3140.3930.4710.5500.5890.6280.7070.785

127144165222287329133152175235303349408476514557605659754807856902985

109311621195122612871344

3030304560603030304560606080808080809595959595

110110110110110110

18274066

107159

19284270

113168253325400493609755906

1072123714021729208424112573273630603384

2530406080

1052530406080

105140165195225260300340375420455515575630655680730780

2.531.591.00

0.6280.3950.248

2.581.621.02

0.6410.4030.2530.1590.1260.100

0.07950.06300.05000.04230.03530.03020.02640.02120.01760.01510.01410.01320.01180.0106

20253040557020253040557095

110125145165195215240260280320355385400410435455

9

STRANDSNo.

SIZEAWG /kcmil

STRANDINGCLASS

SECTION(sq inches)

CONDUCTORDIAMETER

(mils)

INSULATIONTHICKNESS

(mils)

INSULATIONDIAMETER

(mils)

DCRESISTANCE

AT 20°C 1(ohm/kft)

APPROX.TOTAL

WEIGTH (pound/kft)

AMPACITY 2

(A) 3AMPACITY 2

(A) 4

10

Description


Construction



Options

Available upon request, THW-LS (Low Smoke emission), THW-SR(Sunlight Resistant) and with insulation Gasoline and Oil resistantG&O (different types and grades of resistance to oil and gasoline)

Characteristics



Applications

THW cables and wires are used generally in building wiring, feederand branch circuits, and internal secondary industrial distribution.

Installation: in ducts tubing and boards; raceways for 1/0 AWG andgreater sizes, according to NEC and NTC 2050 standards.Standards

Wire and Cable Type THWThermoplastic Insulation, Heat Resistant (75°C), Suitable for Wet Locations

11

CENTELSA THW wires and cables are manufactured under the followingstandards:

Satndards

ASTM B3, NTC 359. Soft copper wire.ASTM B8, NTC 307. Concentric Lay Stranded copper conductors.ASTM B787. 19 Wire Combination Unilay Stranded Copper conductors forsubsequent insulationUL 1581, NTC-3203. Reference Standard for Electrical Wires, Cables andFlexible Cords.UL 83, NTC-1332. Thermoplastic insulated Wires and Cables.

Certifications

CENTELSA THW Wires and Cables are certified by:

UL 83. File E206516.ICONTEC (Colombia). Standard NTC 1332.CIDET (Colombia). Cert. No. 00406.LAPEM (Mexico). CFE E0000-03.FONDONORMA (Venezuela). NORVEN 364 (Standard COVENIN 397).

ColorsSizes 14 to 6 AWG: black, white, red, green, yellow, blue. Sizes 4 AWG andgreater: black

PackagingSizes 14 to 10 AWG: 100 m spools covered with plastic thermo pack, incorrugated carton boxes. Sizes 8 and 6: 2000 m reels, Sizes 4 to 4/0 AWG:1000 m reels. Sizes 250 to 500 kcmil: 500 m reels.


12

Wire and Cable Type THW (International System Units)Thermoplastic Insulation, Heat Resistant (75°C), Suitable for Wet Locations

Standard: UL 83, NTC 1332. Thermoplastic insulated Wires and Cables

Notes: 1. DC resistance calculated based on a 17.241 ohm-mm2/km resistivity for cooper.2. 75°C conductor temperature, 30°C ambient temperature, According to NEC and NTC 2050, for sizes 14 12 and 10 AWG overload

protection must be 15, 20 and 30 A.3. One single conductor at free air at 30°C ambient temperature.4. No more than three current carrying conductors in a duct or in direct burial, 30°C ambient temperature.5. According to NEC NTC 2050 the minimun size for use in Tray Cables must be 1/0 AWG for phase conductors, and 4 AWG for grounding conductors.6. Data herein indicated are approximated and are subject to normal manuracturing tolerances.

1.632.052.593.264.125.191.792.252.853.594.525.717.207.908.889.96

11.1912.5614.1815.5216.7817.9420.0422.0023.7524.5925.3926.9428.38

1111117777777

19191919193737373737616161616161

141210

864

141210

86421

1/02/03/04/0

250300350400500600700750800900

1000



2.083.315.268.37

13.3021.15

2.083.315.268.37

13.3021.1533.6342.4153.4867.4385.03107.2126.7152.0177.3202.7253.4304.0354.7380.0405.4456.0506.7

3.233.654.195.647.298.363.393.854.455.977.698.88

10.3712.0813.0614.1515.3716.7519.1520.4921.7522.9125.0127.7529.5030.3531.1532.7034.14

0.760.760.761.141.521.520.760.760.761.141.521.521.522.032.032.032.032.032.412.412.412.412.412.792.792.792.792.792.79

27395997

157235

284162

102165247373479589727899

111513371583182820722558308335673808405045315011

3035507095

1253035507095

125170195230265310360405455505545620690755785815870935

8.295.213.282.061.30

0.8158.455.313.342.101.32

0.8310.5230.4150.3290.2610.2070.1640.1390.116

0.09920.08680.06940.05780.04960.04630.04340.03860.0347

202535506585202535506585

115130150175200230255285310335380420460475490520545

STRANDSNo.

SIZEAWG /kcmil

STRANDINGCLASS

SECTION(mm2)

CONDUCTORDIAMETER

(mm)

INSULATIONTHICKNESS

(mm)

INSULATIONDIAMETER

(mm)

DCRESISTANCE

AT 20°C 1(ohm/km)

APPROX.TOTAL

WEIGTH (kg/km)

AMPACITY 2

(A) 3AMPACITY 2

(A) 4

13

Notes: 1. DC resistance calculated based on a 10.371 ohm-cmil/ft resistivity for cooper.2. 75°C conductor temperature, 30°C ambient temperature, According to NEC and NTC 2050, for sizes 14 12 and 10 AWG overload protection must be 15, 20 and 30 A.3. One single conductor at free air at 30°C ambient temperature.4. No more than three current carrying conductors in a duct or in direct burial, 30°C ambient temperature.5. According to NEC NTC 2050 the minimun size for use in Tray Cables must be 1/0 AWG for phase conductors, and 4 AWG for grounding


6481

102128162204

7089

112141178225283311349392440494558611661706789866935968

100010611117

1111117777777

19191919193737373737616161616161

141210

864

141210

86421

1/02/03/04/0

250300350400500600700750800900

1000



0.003230.005130.00815

0.01300.02060.0328

0.003230.005130.00815

0.01300.02060.03280.05210.06570.0829

0.1050.1320.1660.1960.2360.2750.3140.3930.4710.5500.5890.6280.7070.785

127144165222287329133152175235303349408476514557605659754807856902985

109311621195122612871344

3030304560603030304560606080808080809595959595

110110110110110110

18263965

106158

19284169

111166250322396488604749899

1064122913931719207223972559272130453368

3035507095

1253035507095

125170195230265310360405455505545620690755785815870935

2.531.591.00

0.6280.3950.248

2.581.621.02

0.6410.4030.2530.1590.1260.100

0.07950.06300.05000.04230.03530.03020.02640.02120.01760.01510.01410.01320.01180.0106

202535506585202535506585

115130150175200230255285310335380420460475490520545

Wire and Cable Type THWThermoplastic Insulation, Heat Resistant (75°C), Suitable for Wet Locations


STRANDSNo.

SIZEAWG /kcmil

STRANDINGCLASS

SECTION(sq inches)

CONDUCTORDIAMETER

(mils)

INSULATIONTHICKNESS

(mils)

INSULATIONDIAMETER

(mils)

DCRESISTANCE

AT 20°C 1(ohm/kft)

APPROX.TOTAL

WEIGTH (pound/kft)

AMPACITY 2

(A) 3AMPACITY 2

(A) 4

Description

Soft copper conductor, PVC-LS (Low smoke emissions) insulated.

Construction


InsulationTHW-LS: Polyvinyl Chloride (PVC 75°C), flame retardant and lowsmoke emissions (LS).THHW-LS: Polyvinyl Chloride (PVC 90°C), flame retardant and lowsmoke emissions (LS).

Characteristics

Operating TemperatureDry Locations THHW-LS 90°C, THW-LS 75°CWet Locations THHW-LS 75°C, THW-LS 75°C


Applications

THW-LS and THHW-LS cables and wires are used generally in buildingwiring, feeder and branch circuits, and internal secondary industrialdistribution. In installations what require special security conditions infire case.

In fire case, THS-LS and THHW-LS have an excellent performanceregarding low smoke emissions, darkness, toxicity, and corrosivesmoke.

Wire and Cable Type THW-LS and THHW-LSThermoplastic Insulation, Heat Resistant (75°C), Suitable for Wet Locations, Low SmokeThermoplastic Insulation, High Heat Resistant (90°C), Suitable for Wet Location (75°C), Low Smoke

14

Installation: in ducts tubing and boards; raceways for 1/0 AWG and greatersizes, according to NEC and NTC 2050 standards.

Standards

CENTELSA THW-LS and THHW-LS wires and cables are manufactured underthe following standards:


Certifications

CENTELSA THW-LS and RHHW-LS Wires and Cables are certified by:

ICONTEC (Colombia). Standard NTC 1332.LAPEM (Mexico). CFE E0000-03.FONDONORMA (Venezuela). NORVEN 364 (Standard COVENIN 397).ANCE (Mexico) NOM 063.




15

16

Notes: 1. DC resistance calculated based on a 17.241 ohm-mm2/km resistivity for cooper.2. No more than three current carrying conductors in a duct or in direct burial, 30°C ambient temperature, according to NEC and NTC 2050, for sizes 14 12 and 10 AWG overload protection must be 15, 20 and 30 A.3. According to NEC NTC 2050 the minimun size for use in Tray Cables must be 1/0 AWG for phase conductors, and 4 AWG for grounding conductors.4. Data herein indicated are approximated and are subject to normal manuracturing tolerances.

1.632.052.593.264.125.191.752.212.783.514.425.587.047.908.889.96

11.1912.5614.1815.5216.7817.9420.0422.0023.7524.5925.3926.9428.38

111111

1919191919191919191919193737373737616161616161

141210

864

141210

86421

1/02/03/04/0

250300350400500600700750800900

1000


CCCCCCCBBBBBBBBBBBBBBBB

2.083.315.268.37

13.3021.15

2.083.315.268.37

13.3021.1533.6342.4153.4867.4385.03107.2126.7152.0177.3202.7253.4304.0354.7380.0405.4456.0506.7

3.233.654.195.647.298.363.353.814.385.897.598.75

10.2112.0813.0614.1515.3716.7519.1520.4921.7522.9125.0127.7529.5030.3531.1532.7034.14

0.760.760.761.141.521.520.760.760.761.141.521.521.522.032.032.032.032.032.412.412.412.412.412.792.792.792.792.792.79

27405999

160237

284161

102166246371484595734907

112313481595184120862573310235883830407145545036

202535506585202535506585

115130150175200230255285310335380420460475490520545

8.295.213.282.061.30

0.8158.455.313.342.101.32

0.8310.5230.4150.3290.2610.2070.1640.1390.116

0.09920.08680.06940.05780.04960.04630.04340.03860.0347

253040557595253040557595

130150170195225260290320350380430475520535555585615

Wire and Cable Types THW-LS y THHW-LS 600V(International System Units)Thermoplastic Insulation, Heat Resistant (75°C), Suitable for Wet Locations, Low SmokeThermoplastic Insulation, High Heat Resistant (90°C), Suitable for Wet Locations (75°C), Low Smoke


STRANDSNo.

SIZEAWG /kcmil

STRANDINGCLASS

SECTION(mm2)

CONDUCTORDIAMETER

(mm)

INSULATIONTHICKNESS

(mm)

INSULATIONDIAMETER

(mm)

DCRESISTANCE

AT 20°C 1(ohm/km)

APPROX.TOTAL

WEIGTH (kg/km)

AMPACITY 2

75°C

(A) 3

AMPACITY 2

75°C

(A) 4

17

Notes: 1. DC resistance calculated based on a 10.371 ohm-cmil/ft resistivity for cooper.2. No more than three current carrying conductors in a duct or in direct burial, 30°C ambient temperature, according to NEC and NTC 2050, for sizes 14 12 and 10 AWG overload protection must be 15, 20 and 30 A.3. According to NEC NTC 2050 the minimun size for use in Tray Cables must be 1/0 AWG for phase conductors, and 4 AWG for grounding conductors.4. Data herein indicated are approximated and are subject to normal manuracturing tolerances.

6481

102128162204

6987

110138174220277311349392440494558611661706789866935968

100010611117

111111

1919191919191919191919193737373737616161616161

141210

864

141210

86421

1/02/03/04/0

250300350400500600700750800900

1000


CCCCCCCBBBBBBBBBBBBBBBB

0.003230.005130.00815

0.01300.02060.0328

0.003230.005130.00815

0.01300.02060.03280.05210.06570.0829

0.1050.1320.1660.1960.2360.2750.3140.3930.4710.5500.5890.6280.7070.785

127144165222287329132150173232299344402476514557605659754807856902985

109311621195122612871344

3030304560603030304560606080808080809595959595

110110110110110110

18274066

107159

19284169

111165249326400493609755906

1072123714021729208524112574273630613384

202535506585202535506585

115130150175200230255285310335380420460475490520545

2.531.591.00

0.6280.3950.248

2.581.621.02

0.6410.4030.2530.1590.1260.100

0.07950.06300.05000.04230.03530.03020.02640.02120.01760.01510.01410.01320.01180.0106

253040557595253040557595

130150170195225260290320350380430475520535555585615

Wire and Cable Types THW-LS y THHW-LS 600VThermoplastic Insulation, Heat Resistant (75°C), Suitable for Wet Locations, Low SmokeThermoplastic Insulation, High Heat Resistant (90°C), Suitable for Wet Locations (75°C), Low Smoke


STRANDSNo.

SIZEAWG /kcmil

STRANDINGCLASS

SECTION(sq inches)

CONDUCTORDIAMETER

(mils)

INSULATIONTHICKNESS

(mils)

INSULATIONDIAMETER

(mils)

DC RESISTANCEAT 20°C 1(ohm/kft)

APPROX.TOTAL

WEIGTH (pound/kft)

AMPACITY 2

75°C(A) 3

AMPACITY 2

90°C(A) 4

18

Wire and Cable Type THHN/THWN and THWN-2Thermoplastic Insulation, High Heat Resistant (90°C), Dry Locations only, Nylon JacketThermoplastic Insulation, Heat Resistant (75°C), Suitable for Wet Locations, Nylon JacketThermoplastic Insulation, Heat Resistant (90°C), Suitable for Wet Locations, Nylon Jacket,2: 90°C Wet and Dry Locations

Description

Soft copper conductor, PVC insulated and with a Nylon covering

Construction


InsulationPolyvinyl Chloride (PVC 90° C), flame retardant, for THHN and THWN-2Polyvinyl Chloride (PVC 75° C), flame retardant, for THWN

JacketAbrasion resistant Nylon

Options

Available upon request, LS insulation (Low Smoke emission), SRSunlight Resistant insulation and with insulation Gasoline and Oilresistant G&O (different types and grades of resistance to oil andgasoline)

Characteristics

Operating TemperatureDry Locations, THHN and THWN-2: 90°C.Wet Locations, THWN and THHN: 75°C.Wet Locations, THWN-2: 90°C.

19


Applications

THHN/THWN and THWN-2 cables and wires are used generally in buildingwiring, feeder and branch circuits, and internal secondary industrial distribution.Special for locations with abrasive environment, oil, grease, gasoline and otherchemical agents contaminated ambient.


Standards

CENTELSA THHN/THWN and THWN-2 wires and cables are manufacturedunder the following standards:


Certifications

CENTELSA THHN/THWN and THWN-2 Wires and Cables are certified by:

UL 83. File E206516.ICONTEC (Colombia). Standard NTC 1332.CIDET (Colombia). Cert. No. 00406.ANCE (Mexico) NOM 063.




Notes: 1. DC resistance calculated based on a 17.241 ohm-mm2/km resistivity for cooper.2. 90°C conductor temperature, 30°C ambient temperature, According to NEC and NTC 2050, for sizes 14 12 and 10 AWG overload protection must be 15, 20 and 30 A.3. One single conductor at free air at 30°C ambient temperature.4. No more than three current carrying conductors in a duct or in direct burial, 30°C ambient temperature.5. According to NEC NTC 2050 the minimun size for use in Tray Cables must be 1/0 AWG for phase conductors, and 4 AWG for grounding conductors.6. Data herein indicated are approximated and are subject to normal manuracturing tolerances.

20

Wire and Cable Type THHN/THWN and THWN-2 600V(International System Units)Thermoplastic Insulation, High Heat Resistant (90°C), Dry Locations only, Nylon JacketThermoplastic Insulation, Heat Resistant (75°C), Suitable for Wet Locations, Nylon JacketThermoplastic Insulation, Heat Resistant (90°C), Suitable for Wet Locations, Nylon Jacket,2: 90°C Wet and Dry Locations


1.631.791.752.052.252.212.592.852.783.263.593.514.124.524.425.715.587.207.047.908.188.889.189.96

10.3111.1911.5812.5613.0014.1814.1815.5215.5216.7816.7817.9417.9420.0420.0422.0022.0023.7523.7524.5924.5925.3925.3926.9426.9428.3828.38

17

1917

1917

1917

1917

197

197

191937193719371937193737613761376137613761619161916191619161916191

141414121212101010

888666442211

1/01/02/02/03/03/04/04/0

250250300300350350400400500500600600700700750750800800900900

10001000

SolidBC

SolidBC

SolidBC

SolidBC

SolidBCBCBCBCBCBCBCBCBCBCBCBCBCBCBCBCBCBCBC

2.082.082.083.313.313.315.265.265.268.378.378.37

13.3013.3013.3021.1521.1533.6333.6342.4142.4153.4853.4867.4367.4385.0385.03107.2107.2126.7126.7152.0152.0177.3177.3202.7202.7253.4253.4304.0304.0354.7354.7380.0380.0405.4405.4456.0456.0506.7506.7

2.732.892.853.153.363.313.954.214.145.195.525.446.056.456.358.228.099.719.55

11.0011.2811.9812.2813.0713.4114.2914.6815.6616.1017.8717.8719.2219.2220.4820.4821.6321.6323.7423.7426.2926.2928.0428.0428.8828.8829.6829.6831.2331.2332.6832.68

0.100.100.100.100.100.100.100.100.100.130.130.130.130.130.130.150.150.150.150.180.180.180.180.180.180.180.180.180.180.200.200.200.200.200.200.200.200.200.200.230.230.230.230.230.230.230.230.230.230.230.23

242524353737565958929795

139146144234231358353452453560561695696864865

107710781286128415291526177017672011200724912486299829913476346937153707395439454431442149064895

353535404040555555808080

105105105140140190190220220260260300300350350405405455455505505570570615615700700780780855855885885920920985985

10551055

8.298.458.455.215.315.313.283.343.342.062.102.101.301.321.32

0.8310.8310.5230.5230.4150.4150.3290.3290.2610.2610.2070.2070.1640.1640.1390.1390.1160.116

0.09920.09920.08680.08680.06940.06940.05780.05780.04960.04960.04630.04630.04340.04340.03860.03860.03470.0347

2525253030304040405555557575759595

130130150150170170195195225225260260290290320320350350380380430430475475520520535535555555585585615615

2.472.632.592.893.093.053.693.943.884.865.195.115.726.126.027.827.699.319.15

10.5410.8211.5211.8212.6112.9513.8314.2215.2015.6417.3517.3518.6918.6919.9519.9521.1121.1123.2123.2125.7025.7027.4527.4528.2928.2929.0929.0930.6430.6432.0832.08

0.380.380.380.380.380.380.510.510.510.760.760.760.760.760.761.021.021.021.021.271.271.271.271.271.271.271.271.271.271.521.521.521.521.521.521.521.521.521.521.781.781.781.781.781.781.781.781.781.781.781.78

STRANDSNo.

SIZEAWG /kcmil

STRANDINGCLASS

SECTION(mm2)

CONDUCTORDIAMETER

(mm)

INSULATIONTHICKNESS

(mm)

INSULATIONDIAMETER

(mm)

DCRESISTANCE

AT 20°C 1(ohm/km)

APPROX.TOTAL

WEIGTH (kg/km)

AMPACITY 2

(A) 3AMPACITY 2

(A) 4JACKET

THICKNESS(mm)

JACKETDIAMETER

(mm)

Wire and Cable Type THHN/THWN and THWN-2 600VThermoplastic Insulation, High Heat Resistant (90°C), Dry Locations only, Nylon JacketThermoplastic Insulation, Heat Resistant (75°C), Suitable for Wet Locations, Nylon JacketThermoplastic Insulation, Heat Resistant (90°C), Suitable for Wet Locations, Nylon Jacket,2: 90°C Wet and Dry Locations


21

Notes: 1. DC resistance calculated based on a 10.371 ohm-cmil/ft resistivity for cooper.2. 90°C conductor temperature, 30°C ambient temperature, According to NEC and NTC 2050, for sizes 14 12 and 10 AWG overload protection must be 15, 20 and 30 A.3.One single conductor at free air at 30°C ambient temperature.4. No more than three current carrying conductors in a duct or in direct burial, 30°C ambient temperature.5. According to NEC NTC 2050 the minimun size for use in Tray Cables must be 1/0 AWG for phase conductors, and 4 AWG for grounding conductors.6. Data herein indicated are approximated and are subject to normal manuracturing tolerances.

647069818987

102112110128141138162178174225220283277311322349361392406440456494512558558611611661661706706789789866866935935968968

100010001061106111171117

17

1917

1917

1917

1917

197

197

191937193719371937193737613761376137613761619161916191619161916191

141414121212101010

888666442211

1/01/02/02/03/03/04/04/0

250250300300350350400400500500600600700700750750800800900900

10001000

SolidBC

SolidBC

SolidBC

SolidBC

SolidBCBCBCBCBCBCBCBCBCBCBCBCBCBCBCBCBCBCBC

0.003230.003230.003230.005130.005130.005130.008150.008150.00815

0.01300.01300.01300.02060.02060.02060.03280.03280.05210.05210.06570.06570.08290.0829

0.1050.1050.1320.1320.1660.1660.1960.1960.2360.2360.2750.2750.3140.3140.3930.3930.4710.4710.5500.5500.5890.5890.6280.6280.7070.7070.7850.785

107114112124132130155166163204217214238254250323318382376433444472484515528563578617634704704757757806806852852935935

103510351104110411371137116911691230123012861286

444444444555555666677777777778888888888999999999999

161716242525384039626564949897

157155241237304304376377467468581581724724864863

10271025119011871352134916741671201520102336233124972491265726512978297132973290

353535404040555555808080

105105105140140190190220220260260300300350350405405455455505505570570615615700700780780855855885885920920985985

10551055

2.532.582.581.591.621.621.001.021.02

0.6280.6410.6410.3950.4030.4030.2530.2530.1590.1590.1260.1260.1000.100

0.07950.07950.06300.06300.05000.05000.04230.04230.03530.03530.03020.03020.02640.02640.02120.02120.01760.01760.01510.01510.01410.01410.01320.01320.01180.01180.01060.0106

2525253030304040405555557575759595

130130150150170170195195225225260260290290320320350350380380430430475475520520535535555555585585615615

97103102114122120145155153191204201225241237308303367360415426453465496510544560598616683683736736785785831831914914

101210121081108111141114114511451206120612631263

151515151515202020303030303030404040405050505050505050505060606060606060606060707070707070707070707070

STRANDSNo.

SIZEAWG /kcmil

STRANDINGCLASS

SECTION(sq inches)

CONDUCTORDIAMETER

(mils)

INSULATIONTHICKNESS

(mils)

INSULATIONDIAMETER

(mils)

DCRESISTANCE

AT 20°C 1(ohm/kft)

APPROX.TOTAL

WEIGTH (pound /kft)

AMPACITY 2

(A) 3AMPACITY 2

(A) 4JACKET

THICKNESS(mils)

JACKETDIAMETER

(mils)

22

Description


Construction



Characteristics

Operating TemperatureDry Locations 60° C.


Applications

TF cables and wires are used in internal board and equipment wiring.Installation: in ducts tubing and boards

Standards

CENTELSA TF wires and cables are manufactured under the followingstandards:ASTM B3, NTC 359. Soft copper wire.ASTM B8, NTC 307. Concentric Lay Stranded copper conductors.UL 62, NTC-2356. Flexible Cord and Fixture Wire.

ColorsBlack, white, red, yellow, blue.

Wire and Cable Type TFThermoplastic Insulation, Fixture Wire

23

Packaging100 m spools covered with plastic thermo pack, in corrugated carton boxes.


STRANDSNo.

SIZEAWG /kcmil

STRANDINGCLASS

SECTION(mm2)

CONDUCTORDIAMETER

(mm)

INSULATIONTHICKNESS

(mm)

DIAMETEROVER

INSULATION(mm)

DCRESISTANCE

AT 20°C 1(ohm/km)

APPROX.TOTAL

WEIGTH(kg/km)

AMPACITY 2

(A) 3

1.021.291.121.42

1177

18161816

SolidSolid

BB

0.821.310.821.31

2.622.892.723.02

0.760.760.760.76

14191520

6868

20.913.221.413.4

Notes: 1. DC resistance calculated based on a 17.241 ohm-mm2/km resistivity for cooper.2. By NEC and NTC 2050 Section 402-5.3. Data herein indicated are approximated and are subject to normal manuracturing tolerances.

Wire and Cable Type TF 600V (International System Units)Thermoplastic Insulation, Fixture Wire (60°C)

Standard: UL 62, NTC 2356. Flexible Cord and Fixture Wire

40514456

1177

18161816

SolidSolid

BB

0.001280.002030.001280.00203

103114107119

30303030

9131014

6868

6.384.026.514.10

Notes: 1. DC resistance calculated based on a 10.371 ohm-cmil/ft resistivity for cooper.2. By NEC and NTC 2050 Section 402-5.3. Data herein indicated are approximated and are subject to normal manuracturing tolerances.

Wire and Cable Type TF 600VThermoplastic Insulation, Fixture Wire (60°C)

Standard: UL 62, NTC 2356. Flexible Cord and Fixture Wire

STRANDSNo.

SIZEAWG /kcmil

STRANDINGCLASS

SECTION(sq inches)

CONDUCTORDIAMETER

(mils)

INSULATIONTHICKNESS

(mils)

DIAMETEROVER

INSULATION(mils)

DCRESISTANCE

AT 20°C 1(ohm/kft)

APPROX.TOTAL

WEIGTH(pound/kft)

AMPACITY 2

(A) 3

24

Construction

ConductorSolid or compressed strand soft copperInsulationPolyvinyl Chloride (PVC 90° C), flame retardantJacketAbrasion resistant Nylon

Options

Available upon request, with insulation Gasoline and Oil resistant G&O(different types and grades of resistance to oil and gasoline)

Characteristics

Operating TemperatureDry Locations: 90°C.Wet Locations: 75°C.Operating Voltage600 V.

Applications

TFN cables and wires are used generally in internal equipment andboard wiring.Installation: in ducts tubing and boards.

Special for locations with abrasive environment, oil, grease, gasolineand other chemical agents contaminated ambient. TFN may be usedas AWM (Appliance Wiring Material) at 105°C conductor temperature.

Standards

CENTELSA TFN wires and cables are manufactured under the followingstandards:ASTM B3, NTC 359. Soft copper wire.ASTM B8, NTC 307. Concentric Lay Stranded copper conductors.ASTM B787. 19 Wire Combination Unilay Stranded Copper conductorsfor subsequent insulation

Wire and Cable Type TFNThermoplastic Insulation, Fixture Wire, Nylon Jacket

25

UL 62, NTC-2356. Flexible Cord and Fixture Wire.

ColorsBlack, white, red, yellow, blue.

Packaging100 m spools covered with plastic thermo pack, in corrugated carton boxes.


Notes: 1. DC resistance calculated based on a 17.241 ohm-mm2/km resistivity for cooper.2. By NEC and NTC 2050 Section 402-5.3. Data herein indicated are approximated and are subject to normal manuracturing tolerances.

Wire and Cable Type TFN 600V (International System Units)Thermoplastic Insulation, Fixture Wire, Nylon Jacket (90°C)

Standard: UL 62, NTC-2356. Flexible Cord and Fixture Wire.

Notes: 1. DC resistance calculated based on a 10.371 ohm-cmil/ft resistivity for cooper.2. By NEC and NTC 2050 Section 402-5.3. Data herein indicated are approximated and are subject to normal manuracturing tolerances.

Wire and Cable Type TFN 600VThermoplastic Insulation, Fixture Wire, Nylon Jacket (90°C)

Standard: UL 62, NTC-2356. Flexible Cord and Fixture Wire.

DCRESISTANCE

AT 20°C 1(ohm/km)

APPROX.TOTAL

WEIGTH(kg/km)

STRANDSNo.

SIZEAWG /kcmil

STRANDINGCLASS

SECTION(mm2)

CONDUCTORDIAMETER

(mm)

INSULATIONTHICKNESS

(mm)

DIAMETEROVER

INSULATION(mm)

JACKETTHICKNESS

(mm)

DIAMETEROVER

JACKET(mm)

AMPACITY 2

(A)

1.021.291.121.42

1177

18161816

SolidSolid

BB

0.821.310.821.31

1.862.131.962.26

0.380.380.380.38

2.092.362.192.48

6868

0.100.100.100.10

11161117

20.9513.1721.3713.44

40514456

1177

18161816

SolidSolid

BB

0.001280.002030.001280.00203

73847789

15151515

82938698

6868

4444

7118

11

6.384.026.514.10

DCRESISTANCE

AT 20°C 1(ohm/kft)

APPROX.TOTAL

WEIGTH(pound/kft)

STRANDSNo.

SIZEAWG /kcmil

STRANDINGCLASS

SECTION(sq inches)

CONDUCTORDIAMETER

(mils)

INSULATIONTHICKNESS

(mils)

DIAMETEROVER

INSULATION(mils)

JACKETTHICKNESS

(mils)

DIAMETEROVER

JACKET(mils)

AMPACITY 2

(A)

26

Description

THHN circuit conductors paralleled or twisted, PVC jacket.

Construction

Circuit ConductorSolid or compressed strand soft copper

InsulationPolyvinyl Chloride (PVC 90°C), flame retardant and Nylon covered

JacketPolyvinyl Chloride (PVC 75°C), flame retardant and wet resistant.

Options

Available with or without solid soft copper grounding conductor.

Characteristics

Operating TemperatureDry Locations: 90°C.


Applications

NM-B cables and wires are used mainly in internal residential buildingwiring in branch circuits.Installation: fished in air voids in masonry block or tile walls, where isnot exposed to excessive moisture.

Wire and Cable Type NM-BNon Metallic Sheathed Cable. B: 90°C Insulation

27

Standards

CENTELSA NM-B wires and cables are manufactured under the followingstandards:

ASTM B3, NTC 359. Soft copper wire.ASTM B8, NTC 307. Concentric Lay Stranded copper conductors.UL 83, NTC-1332. Thermoplastic insulated Wires and Cables.UL 719 Non Metallic Jacket Cables.

ColorsBlack jacket for sizes 14 to 10 AWG, and black jacket for sizes 8 and greater.Circuit conductors are color code identified, 2 circuits black-white 3 circuitsblack-white-red.

Packaging100 m spools covered with plastic thermo pack.


28

Wires and Cables Type NM-B 600V(International System Units)Non Metallic Sheathed Cable. B: 90°C Insulation

Standard: UL 719. Non Metallic Jacket Cables

Notes: 1. DC resistance calculated based on a 17.241 ohm-mm2/km resistivity for cooper.2. No more than three current carrying conductors in a duct or in direct burial, 90°C conductor temperatur (By NEC and NTC 2050 section

33626) and 30°C ambient temperature, according to NEC and NTC 2050, for sizes 14 12 and 10 AWG overload protection must be 15, 20 and 30 A.

3. Data herein indicated are approximated and are subject to normal manuracturing tolerances

(THHN)CIRCUIT

CONDUCTORS

CONDUCTORDIAMETER

(mm)

STRANDSNo.

SIZEAWG /kcmil

STRANDINGCLASS

SECTION(mm2)

(THHN)DIAMETER

CONDUCTORS

SOLIDGROUNDING CONDUCTOR

SIZE (AWG)

GROUNDINGCONDUCTOR

DIAMETER(mm)

DCRESISTANCE

AT 20°C 1(ohm/km)

APPROX.TOTAL

WEIGTH (kg/km)

JACKETDIMENSIONS

(mm)

AMPACITY 2

(A)JACKET

THICKNESS(mm)

1.632.052.593.594.525.717.201.632.052.593.594.525.717.201.632.052.593.594.525.717.201.632.052.593.594.525.717.20

1117777111777711177771117777

141210

8642

141210

8642

141210

8642

141210

8642

SolidSolidSolid

BBBB

SolidSolidSolid

BBBB

SolidSolidSolid

BBBB

SolidSolidSolid

BBBB

2.083.315.268.37

13.3021.1533.63

2.083.315.268.37

13.3021.1533.63

2.083.315.268.37

13.3021.1533.63

2.083.315.268.37

13.3021.1533.63

0.760.760.760.760.760.760.760.760.760.760.760.760.760.760.760.760.760.760.760.760.760.760.760.760.760.760.760.76

-------

1.632.052.592.592.593.263.26

-------

1.632.052.592.592.593.263.26

8.295.213.282.101.320.830.528.295.213.282.101.32

0.8310.523

8.455.313.342.141.35

0.8480.533

8.455.313.342.141.35

0.8480.533

6998

143242348534793

90127192281386600856

97136206344499780

1171126179269406567881

1274

20253040557095202530405570952025304055709520253040557095

-------

1412101010

88-------

1412101010

88

2.693.123.915.486.418.169.652.693.123.915.486.418.169.652.693.123.915.486.418.169.652.693.123.915.486.418.169.65

2222222222222233333333333333

8.929.77

11.1013.9715.8318.7721.75

8.929.89

12.0115.1417.0021.1924.17

7.408.32

10.0314.4015.4119.1922.40

8.619.89

12.0115.1417.0021.1924.17

4.29 4.72 5.51 7.38 8.3110.0611.55 4.29 4.72 5.51 7.088.01

9.7611.25

xxxxxxxxxxxxxx

29

Wires and Cables Type NM-B 600VNon Metallic Sheathed Cable. B: 90°C Insulation

Standard: UL 719. Non Metallic Jacket Cables

Notes: 1. DC resistance calculated based on a 10.371 ohm-cmil/ft resistivity for cooper.2. No more than three current carrying conductors in a duct or in direct burial, 90°C conductor temperatur (By NEC and NTC 2050 section

33626) and 30°C ambient temperature, according to NEC and NTC 2050, for sizes 14 12 and 10 AWG overload protection must be 15,20 and 30 A.

3. Data herein indicated are approximated and are subject to normal manuracturing tolerances

6481

102141178225283

6481

102141178225283

6481

102141178225283

6481

102141178225283

1117777111777711177771117777

141210

8642

141210

8642

141210

8642

141210

8642

SolidSolidSolid

BBBB

SolidSolidSolid

BBBB

SolidSolidSolid

BBBB

SolidSolidSolid

BBBB

0.00320.00510.00820.01300.02060.03280.05210.00320.00510.00820.01300.02060.03280.05210.00320.00510.00820.01300.02060.03280.05210.00320.00510.00820.01300.02060.03280.0521

30303030303030303030303030303030303030303030303030303030

-------

6481

102102102128128

-------

6481

102102102128128

2.531.591.00

0.6410.4030.2530.159

2.531.591.00

0.6410.4030.2530.159

2.581.621.02

0.6540.4110.2580.163

2.581.621.02

0.6540.4110.2580.163

466696

163234359533

6186

129189259403575

6592

138231336524787

85120181273381592856

20253040557095202530405570952025304055709520253040557095

-------

1412101010

88-------

1412101010

88

106123154216252321380106123154216252321380106123154216252321380106123154216252321380

2222222222222233333333333333

351385437550623739856351389473596669834952292328395567607755882339389473596669834952

169186217290327396455169186217279315384443

xxxxxxxxxxxxxx

(THHN)CIRCUIT

CONDUCTORS

CONDUCTORDIAMETER

(mm)

STRANDSNo.

SIZEAWG /kcmil

STRANDINGCLASS

SECTION(mm2)

(THHN)DIAMETER

CONDUCTORS

SOLIDGROUNDING CONDUCTOR

SIZE (AWG)

GROUNDINGCONDUCTOR

DIAMETER(mm)

DCRESISTANCE

AT 20°C 1(ohm/km)

APPROX.TOTAL

WEIGTH (kg/km)

JACKETDIMENSIONS

(mm)

AMPACITY 2

(A)JACKET

THICKNESS(mm)

Description

Aluminum conductor, PVC insulated.

Construction

ConductorSolid or compressed strand 1350-H19 aluminum


Options

Available upon request, TW-LS (Low Smoke emission), TW-SR (SunlightResistant) and with insulation Gasoline and Oil resistant G&O (differenttypes and grades of resistance to oil and gasoline), conductor in otheraluminum alloys

Characteristics



Application

TW cables and wires are used generally in building wiring, feeder andbranch circuits, and internal secondary industrial distribution.

Installation: in ducts tubing and boards; raceways for 1/0 AWG andgreater sizes, according to NEC and NTC 2050 standards.

Aluminum Wire and Cable Type TWThermoplastic Insulation, Suitable for Wet Locations

30

Standards

CENTELSA TW wires and cables are manufactured under the followingstandards:

ASTM B230, NTC 360. Aluminum 1350-H19 WireASTM B231, NTC 308. Concentric-Lay-Stranded Aluminum 1350 ConductorsUL 83, NTC-1332. Thermoplastic insulated Wires and Cables.

Certifications

CENTELSA TW Wires and Cables are certified by:

UL 83. File E206516. (For 8000 series aluminum conductor)ICONTEC (Colombia). Standard NTC 1332. (For 8000 series aluminumconductor)CIDET (Colombia). Cert. No. 00408.FONDONORMA (Venezuela). NORVEN 364 (Standard COVENIN 397).


31

Aluminum Wire and Cable Type TW 600V(International System Units)Thermoplastic Insulation, Suitable for Wet Locations (60°C)


Notes: 1. DC resistance calculated based on a 28.172 ohm-mm2/km resistivity for aluminum.2. 60°C conductor temperature, 30°C ambient temperature, According to NEC and NTC 2050, for sizes 12 and 10 AWG overload protection must be 15 and 25 A.3. One single conductor at free air at 30°C ambient temperature.4. No more than three current carrying conductors in a duct or in direct burial, 30°C ambient temperature.

5. According to NEC NTC 2050 the minimun size for use in Tray Cables must be 1/0 AWG for phase conductors, and 4 AWG for grounding conductors.6. Data herein indicated are approximated and are subject to normal manuracturing tolerances.

STRANDSNo.

SIZEAWG /kcmil

STRANDINGCLASS

SECTION(mm2)

CONDUCTORDIAMETER

(mm)

INSULATIONTHICKNESS

(mm)

DIAMETEROVER

INSULATION(mm)

DCRESISTANCE

AT 20°C 1(ohm/km)

APPROX.TOTAL

WEIGTH (kg/km)

AMPACITY 2

(A) 3AMPACITY 2

(A) 4

2.052.593.264.125.193.594.525.717.207.908.889.96

11.1912.5614.1815.5216.7817.9420.0422.0023.7524.5925.3926.9428.38

111117777

19191919193737373737616161616161

1210

86486421

1/02/03/04/0

250300350400500600700750800900

1000

SolidSolidSolidSolidSolid

BBBBBBBBBBBBBBBBBBBB

3.315.268.37

13.3021.15

8.3713.3021.1533.6342.4153.4867.4385.03107.2126.7152.0177.3202.7253.4304.0354.7380.0405.4456.0506.7

3.654.195.647.298.365.977.698.88

10.3712.0813.0614.1515.3716.7519.1520.4921.7522.9125.0127.7529.5030.3531.1532.7034.14

0.760.761.141.521.521.141.521.521.522.032.032.032.032.032.412.412.412.412.412.792.792.792.792.792.79

19274777

1065184

116164217258309371448549636722807975

118413491432151416771838

2535456080456080

110130150175200235265290330355405455500515535580625

8.515.353.372.121.333.432.161.36

0.8540.6780.5370.4260.3380.2680.2270.189

0.16200.14180.11340.09450.08100.07560.07090.06300.0567

20253040553040557585

100115130150170190210225260285310320330355375

32

Notes: 1. DC resistance calculated based on a 16.946 ohm-cmil/ft resistivity for aluminum. 2. 60°C conductor temperature, 30°C ambient temperature, According to NEC and NTC 2050, for sizes 12 and 10 AWG

overload protection must be 15 and 25 A.3. One single conductor at free air at 30°C ambient temperature.4. No more than three current carrying conductors in a duct or in direct burial, 30°C ambient temperature.5. According to NEC NTC 2050 the minimun size for use in Tray Cables must be 1/0 AWG for phase conductors, and 4 AWG for grounding conductors.6. Data herein indicated are approximated and are subject to normal manuracturing tolerances.

81102128162204141178225283311349392440494558611661706789866935968

100010611117

111117777

19191919193737373737616161616161

1210

86486421

1/02/03/04/0

250300350400500600700750800900

1000



0.005130.00815

0.01300.02060.03280.01300.02060.03280.05210.06570.0829

0.1050.1320.1660.1960.2360.2750.3140.3930.4710.5500.5890.6280.7070.785

144165222287329235303349408476514557605659754807856902985

109311621195122612871344

30304560604560606080808080809595959595

110110110110110110

1318315271345778

110146174207249301369427485542655795907962

101711271235

2535456080456080

110130150175200235265290330355405455500515535580625

2.601.63

1.0260.6460.4061.0470.6580.4140.2600.2070.164

0.12990.10300.08170.06910.05760.04940.04320.03460.02880.02470.02300.02160.01920.0173

20253040553040557585

100115130150170190210225260285310320330355375

33

Aluminum Wire and Cable Type TW 600VThermoplastic Insulation, Suitable for Wet Locations (60°C)


STRANDSNo.

SIZEAWG /kcmil

STRANDINGCLASS

SECTION(sq inches)

CONDUCTORDIAMETER

(mils)

INSULATIONTHICKNESS

(mils)

DIAMETEROVER

INSULATION(mils)

DCRESISTANCE

AT 20°C 1(ohm/kft)

APPROX.TOTAL

WEIGTH (pound/kft)

AMPACITY 2

(A) 3AMPACITY 2

(A) 4

Description


Construction

ConductorSolid or compressed strand 1350-H19 aluminum


Options

Available upon request, THW-LS (Low Smoke emission), THW-SR(Sunlight Resistant) and with insulation Gasoline and Oil resistantG&O (different types and grades of resistance to oil and gasoline),conductor in other aluminum alloys

Characteristics



Applications

THW cables and wires are used generally in building wiring, feederand branch circuits, and internal secondary industrial distribution.

Installation: in ducts tubing and boards; raceways for 1/0 AWG and

Aluminum Wire and Cable Type THWThermoplastic Insulation, Heat Resistant (75°C), Suitable for Wet Locations

34

greater sizes, according to NEC and NTC 2050 standards.

Standards

CENTELSA THW wires and cables are manufactured under the followingstandards:


Certifications

CENTELSA THW Wires and Cables are certified by:

UL 83. File E206516. (For 8000 series aluminum conductor)ICONTEC (Colombia). Standard NTC 1332. (For 8000 series aluminumconductor)CIDET (Colombia). Cert. No. 00408.FONDONORMA (Venezuela). NORVEN 364 (Standard COVENIN 397).


35

36

Notes: 1. DC resistance calculated based on a 28.172 ohm-mm2/km resistivity for aluminum.2. 75°C conductor temperature, 30°C ambient temperature, According to NEC and NTC 2050, for sizes 12 and 10 AWG overload protection must be 15 and 25 A.3. One single conductor at free air at 30°C ambient temperature.4. No more than three current carrying conductors in a duct or in direct burial, 30°C ambient temperature.5. According to NEC NTC 2050 the minimun size for use in Tray Cables must be 1/0 AWG for phase conductors, and 4 AWG for grounding conductors.6. Data herein indicated are approximated and are subject to normal manuracturing tolerances.

STRANDSNo.

SIZEAWG /kcmil

STRANDINGCLASS

SECTION(mm2)

CONDUCTORDIAMATER

(mm)

INSULATIONTHICKNESS

(mm)

DIAMETEROVER

INSULATION(mm)

DCRESISTANCE

AT 20°C 1(ohm/km)

APPROX.TOTAL

WEIGTH (kg/km)

AMPACITY 2

(A) 3AMPACITY 2

(A) 4

2.052.593.264.125.193.594.525.717.208.189.18

10.3111.5813.0014.1815.5216.7817.9420.0422.0023.7524.5925.3926.9428.38

111117777

19191919193737373737616161616161

1210

86486421

1/02/03/04/0

250300350400500600700750800900

1000



3.315.268.37

13.3021.15

8.3713.3021.1533.6342.4153.4867.4385.03107.2126.7152.0177.3202.7253.4304.0354.7380.0405.4456.0506.7

3.654.195.647.298.365.977.698.88

10.3712.3713.3614.5015.7717.1819.1520.4921.7522.9125.0127.7529.5030.3531.1532.7034.14

0.760.761.141.521.521.141.521.521.522.032.032.032.032.032.412.412.412.412.412.792.792.792.792.792.79

19264675

1045082

113161215255306368444538624709794960

116513291411149216541815

30405575

1005575

100135155180210240280315350395425485540595620645700750

8.515.353.372.121.333.432.161.36

0.8540.6780.5370.4260.3380.2680.2270.189

0.16200.14180.11340.09450.08100.07560.07090.06300.0567

203040506540506590

100120135155180205230250270310340375385395425445

Aluminum Wire and Cable Type THW(International System Units)Thermoplastic Insulation, Heat Resistant (75°C), Suitable for Wet Locations


37

Notes: 1. DC resistance calculated based on a 16.946 ohm-cmil/ft resistivity for aluminum.2. 75°C conductor temperature, 30°C ambient temperature, According to NEC and NTC 2050, for sizes 12 and 10 AWG overload protection must be 15 and 25 A.3. One single conductor at free air at 30°C ambient temperature.4. No more than three current carrying conductors in a duct or in direct burial, 30°C ambient temperature.5. According to NEC NTC 2050 the minimun size for use in Tray Cables must be 1/0 AWG for phase conductors, and 4 AWG for grounding


81102128162204141178225283322361406456512558611661706789866935968

100010611117

111117777

19191919193737373737616161616161

1210

86486421

1/02/03/04/0

250300350400500600700750800900

1000



0.005130.00815

0.01300.02060.03280.01300.02060.03280.05210.06570.0829

0.1050.1320.1660.1960.2360.2750.3140.3930.4710.5500.5890.6280.7070.785

144165222287329235303349408487526571621676754807856902985

109311621195122612871344

30304560604560606080808080809595959595

110110110110110110

1317315070335576

108144172205247298362419477533645783893948

100311121219

30405575

1005575

100135155180210240280315350395425485540595620645700750

2.601.631.03

0.6460.406

1.050.6580.4140.2600.2070.1640.1300.103

0.08170.06910.05760.04940.04320.03460.02880.02470.02300.02160.01920.0173

203040506540506590

100120135155180205230250270310340375385395425445

Aluminum Wire and Cable Type THWThermoplastic Insulation, Heat Resistant (75°C), Suitable for Wet Locations


STRANDSNo.

SIZEAWG /kcmil

STRANDINGCLASS

SECTION(sq inches)

CONDUCTORDIAMATER

(mils)

INSULATIONTHICKNESS

(mils)

DIAMETEROVER

INSULATION(mils)

DCRESISTANCE

AT 20°C 1(ohm/kft)

APPROX.TOTAL

WEIGTH (pound/kft)

AMPACITY 2

(A) 3AMPACITY 2

(A) 4

38

Aluminum Wire and Cable Type THHN/THWN y THWN-2Thermoplastic Insulation, High Heat Resistant (90°C), Dry Locations only, Nylon JacketThermoplastic Insulation, Heat Resistant (75°C), Suitable for Wet Locations, Nylon JacketThermoplastic Insulation, Heat Resistant (90°C), Suitable for Wet Locations, Nylon Jacket,2: 90°C Wet and Dry Locations

Description


Construction

ConductorSolid or compressed strand 1350-H19 aluminum.

InsulationPolyvinyl Chloride (PVC 90° C), flame retardant, for THHN and THWN-2 Polyvinyl Chloride (PVC 75° C), flame retardant, for THWN.

JacketAbrasion resistant Nylon.

Options

Available upon request, LS insulation (Low Smoke emission), SRSunlight Resistant insulation and with insulation Gasoline and Oilresistant G&O (different types and grades of resistance to oil andgasoline), conductor in other aluminum alloys.

Characteristics

Operating TemperatureDry Locations, THHN and THWN-2: 90°C.

39

Wet Locations, THWN and THHN: 75°C.Wet Locations, THWN-2: 90°C.


Applications

THHN/THWN and THWN-2 cables and wires are used generally in buildingwiring, feeder and branch circuits, and internal secondary industrial distribution.Special for locations with abrasive environment, oil, grease, gasoline and otherchemical agents contaminated ambient.


Standards

CENTELSA THHN/THWN and THWN-2 wires and cables are manufacturedunder the following standards:


Certifications

CENTELSA THHN/THWN and THWN-2 Wires and Cables are certified by:

UL 83. File E206516. (For 8000 series aluminum conductor)ICONTEC (Colombia). Standard NTC 1332. (For 8000 series aluminumconductor)CIDET (Colombia). Cert. No. 00408.ANCE (Mexico) NOM 063


Notes: 1. DC resistance calculated based on a 28.172 ohm-mm2/km resistivity for aluminum.2. 75°C conductor temperature, 30°C ambient temperature, According to NEC and NTC 2050, for sizes 12 and 10 AWG overload protection must be 15 and 25 A.3. One single conductor at free air at 30°C ambient temperature.4. No more than three current carrying conductors in a duct or in direct burial, 30°C ambient temperature.5. According to NEC NTC 2050 the minimun size for use in Tray Cables must be 1/0 AWG for phase conductors, and 4 AWG for grounding conductors.6. Data herein indicated are approximated and are subject to normal manuracturing tolerances.

40

STRANDSNo.

SIZEAWG /kcmil

STRANDINGCLASS

SECTION(mm2)

CONDUCTORDIAMETER

(mm)

JACKETTHICKNESS

(mm)

APPROX.TOTAL

WEIGTH (kg/km)

AMPACITY 2

(A) 3AMPACITY 2

(A) 4INSULATIONTHICKNESS

(mm)

INSULATIONOVER

DIAMETER(mm)

2.052.593.264.123.594.525.717.208.189.18

10.3111.5813.0014.1815.5216.7817.9420.0422.0023.7524.5925.3926.9428.38

11117777

19191919193737373737616161616161

1210

8686421

1/02/03/04/0

250300350400500600700750800900

1000

SolidSolidSolidSolid


3.315.268.37

13.308.37

13.3021.1533.6342.4153.4867.4385.03107.2126.7152.0177.3202.7253.4304.0354.7380.0405.4456.0506.7

3.153.955.196.055.526.458.229.71

11.2812.2813.4114.6816.1017.8719.2220.4821.6323.7426.2928.0428.8829.6831.2332.68

0.100.100.130.130.130.130.150.150.180.180.180.180.180.200.200.200.200.200.230.230.230.230.230.23

152440574462

101146187225273332405487570651732893

108012391318139715541710

354060806080

110150175205235275315355395445480545615675700725785845

8.515.353.372.123.432.161.36

0.8540.6780.5370.4260.3380.2680.2270.1890.1620.1420.113

0.09450.08100.07560.07090.06300.0567

25354560456075

100115135150175205230255280305350385420435450480500

2.893.694.865.725.196.127.829.31

10.8211.8212.9514.2215.6417.3518.6919.9521.1123.2125.7027.4528.2929.0930.6432.08

0.380.510.760.760.760.761.021.021.271.271.271.271.271.521.521.521.521.521.781.781.781.781.781.78

Aluminum Wire and Cable Type THHN/THWNand THWN-2 600V (International System Units)Thermoplastic Insulation, High Heat Resistant (90°C), Dry Locations only, Nylon JacketThermoplastic Insulation, Heat Resistant (75°C), Suitable for Wet Locations, Nylon JacketThermoplastic Insulation, Heat Resistant (90°C), Suitable for Wet Locations, Nylon Jacket,2: 90°C Wet and Dry Locations


JACKETDIAMETER

(mm)

DCRESISTANCE

AT 20°C 1(ohm/km)

41

Notes: 1. DC resistance calculated based on a 16.946 ohm-cmil/ft resistivity for aluminum.2. 75°C conductor temperature, 30°C ambient temperature, According to NEC and NTC 2050, for sizes 12 and 10 AWG overload protection must be 15 and 25 A.3. One single conductor at free air at 30°C ambient temperature.4. No more than three current carrying conductors in a duct or in direct burial, 30°C ambient temperature.5. According to NEC NTC 2050 the minimun size for use in Tray Cables must be 1/0 AWG for phase conductors, and 4 AWG for grounding conductors.6. Data herein indicated are approximated and are subject to normal manuracturing tolerances.

81102128162141178225283322361406456512558611661706789866935968

100010611117

11117777

19191919193737373737616161616161

1210

8686421

1/02/03/04/0

250300350400500600700750800900

1000

SolidSolidSolidSolid


0.00510.00820.01300.02060.01300.02060.03280.05210.06570.0829

0.1050.1320.1660.1960.2360.2750.3140.3930.4710.5500.5890.6280.7070.785

124155204238217254323382444484528578634704757806852935

103511041137116912301286

445555667777788888999999

1016273829426898

126151183223272327383438492600726832886939

10441149

354060806080

110150175205235275315355395445480545615675700725785845

2.601.631.03

0.6461.05

0.6580.4140.2600.2070.1640.1300.103

0.08170.06910.05760.04940.04320.03460.02880.02470.02300.02160.01920.0173

25354560456075

100115135150175205230255280305350385420435450480500

114145191225204241308367426465510560616683736785831914

101210811114114512061263

152030303030404050505050506060606060707070707070

Aluminum Wire and Cable Type THHN/THWNand THWN-2 600VThermoplastic Insulation, High Heat Resistant (90°C), Dry Locations only, Nylon JacketThermoplastic Insulation, Heat Resistant (75°C), Suitable for Wet Locations, Nylon JacketThermoplastic Insulation, Heat Resistant (90°C), Suitable for Wet Locations, Nylon Jacket,2: 90°C Wet and Dry Locations


STRANDSNo.

SIZEAWG /kcmil

STRANDINGCLASS

SECTION(sq inches)

CONDUCTORDIAMETER

(mils)

JACKETTHICKNESS

(mils)

DCRESISTANCE

AT 20°C 1(ohm/kft)

APPROX.TOTAL

WEIGTH (pound/kft)

AMPACITY 2

(A) 3AMPACITY 2

(A) 4INSULATIONTHICKNESS

(mils)

INSULATIONOVER

DIAMETER(mils)

JACKETDIAMETER

(mils)

Correction Factors for Ampacity

42

FOR AMBIENT TEMPERATURESOTHER THAN 30°C

For ambient temperatures other than 30°C, multiply the ampacitiesby the appropiate factor.

21-25

26-30

31-35

36-40

41-45

46-50

Temp. °C TW

1.08

1.00

0.91

0.82

0.71

0.58

THW

1.05

1.00

0.94

0.88

0.82

0.75

THHN/THWN andTHWN-2

1.04

1.00

0.96

0.91

0.87

0.82

ADJUSTMENT FACTOR FOR MORE THANTHREE CURRENT CARRYING CONDUCTORS

When the number of Current Carrying Conductors in a cable, duct or raceway exceed3, the Ampacity must be reduced as indicated.

4-6

7-9

10-20

21-30

31-40

41 and more.

NUMBER OF CURRENT-CARRYINGCONDUCTORS

FACTOR

0.80

0.70

0.50

0.45

0.40

0.35

Maximum Number of conductorsin Electrical Metallic Tubing (EMT) - Cables TW and THW

43

43332413

86432111111111----

86521111--------------

141210

86421

1/02/03/04/0

250300350400500600750800900

1000

1511853111111-----------

251914

84321111111--------

96745530181310

765433211111111

5845331811864332111111111--

254195145

814836261816131197665433322

332255190105

634734242017151210

877644333

168129

96533224171210

9765443321111

424326243135

8160443126221916131110

9765544

SIZEAWG /kcmil

NOMINAL CONDUIT DIAMETER (Inches / mm)

Maximum Number of conductorsin Electrical Metallic Tubing (EMT) - Cables THHN and THWN-2

1 1/432

1/213

141210

86421

1/02/03/04/0

250300350400500600750800900

1000

3/419

125

251

1 1/238

376

3 1/289

2 1/264

4102

SIZEAWG /kcmil


6145281612

7543211111111----

1295321111-------------

221610

642111111----------

352616

974311111111-------

138101

6336261611876543321111111

846138221610

7543321111111111

364266167

9669433022191613119766543332

476347219126

91564029252017141110

98654433

24117611164462820151210

876544321111

6084432791611167151373226221815131110

875544

1 1/432

1/213

3/419

125

251

1 1/238

376

3 1/289

2 1/264

4102

Maximum Number of conductors in Type A,Rigid PVC Conduit - Cables TW and THW

44

1 1/432

1/213

141210

86421

1/02/03/04/0

250300350400500600750800900

1000

3/419

125

251

1 1/238

376

3 1/289

2 1/264

4102

SIZEAWG /kcmil


1 1/432

1/213

141210

86421

1/02/03/04/0

250300350400500600750800900

1000

3/419

125

251

1 1/238

376

3 1/289

2 1/264

4102

SIZEAWG /kcmil


Maximum Number of conductors in Type A,Rigid PVC Conduit - Cables THHN and THWN-2

7353331914

864432111111111--

161174311111------------

271912

7531111111---------

44322012

8532211111111-----

150109

6940281712

986543322111111

9670442518118654332111111111

338246155

896439282117141210

8765433322

441321202117845237272319161310

987654433

225164103

59432619141110

865443321111

566412260150108

66473529242017141210

9765544

51392916

975332111111111---

1186311111-------------

181410

632111111----------

31241810

643111111111------

105806033201511765443221111111

6751382113

97543321111111111

235181135

7545332417141210

97655433221

307236176

9859443222191613119876543333

157120

89503022161110

8764433211111

395303226125

75564129242117141210

98754443

wire and cable type tw - centelsa · wire and cable type tw 600v (international system units)...

Documents