winlink 2000
DESCRIPTION
Winlink 2000. An Introduction to eMail over Ham Radio Presented by Bud Semon N7CW With thanks to KI5DR and VE3GFW/K6. Why eMail?. Using e-mail is universal. Minimum training required. Large amounts of data/information may be exchanged, accurately: Detailed damage or status reports. - PowerPoint PPT PresentationTRANSCRIPT
![Page 1: Winlink 2000](https://reader036.vdocuments.us/reader036/viewer/2022062423/56814bb6550346895db8894f/html5/thumbnails/1.jpg)
Winlink 2000
An Introduction to
eMail over Ham Radio
Presented by Bud Semon N7CW
With thanks to
KI5DR and VE3GFW/K6
![Page 2: Winlink 2000](https://reader036.vdocuments.us/reader036/viewer/2022062423/56814bb6550346895db8894f/html5/thumbnails/2.jpg)
Why eMail?Using e-mail is universal.
Minimum training required.
Large amounts of data/information may be exchanged, accurately: Detailed damage or status reports. Detailed work assignments & shift changes. Lists of equipment and supplies needed. Graphic or text-based Medical information. Anything else that may be handled routinely by e-mail.
Every transfer is a Permanently stored record.
Data/information is secure from casual monitoring.
![Page 3: Winlink 2000](https://reader036.vdocuments.us/reader036/viewer/2022062423/56814bb6550346895db8894f/html5/thumbnails/3.jpg)
Paclink, with in a served agency, either behind or in front of a router and/or firewall.
Telpac
Multi-channel VHF/UHF
Packet
CMBO Server
Telnet
Mobile Paclink
Local PMBO
Airmail HF
All it takes is one computer, TNC or Soundcard, the Paclink program and an antenna!
All it takes is one Laptop, a Transceiver, TNC, the Airmail program and an antenna!
Outlook Express
User Interface
Outlook Express
User Interface
![Page 4: Winlink 2000](https://reader036.vdocuments.us/reader036/viewer/2022062423/56814bb6550346895db8894f/html5/thumbnails/4.jpg)
What you needto get started on VHF
Computer
TNC or Sound Card Interface
VHF radio
Internet Connection (Not needed but it will help)
![Page 5: Winlink 2000](https://reader036.vdocuments.us/reader036/viewer/2022062423/56814bb6550346895db8894f/html5/thumbnails/5.jpg)
Computer SetupWindows 98SE or better Appropriate Service
Packs, etc.
Windows .Net Framework
Internet Explorer 6.0 Appropriate Service
Packs, etc.
Outlook Express 6
AGW Packet Engine
and
Paclink
Paclink PostOffice
or
AirMail
![Page 6: Winlink 2000](https://reader036.vdocuments.us/reader036/viewer/2022062423/56814bb6550346895db8894f/html5/thumbnails/6.jpg)
What programs to get
Go to http://winlink.org/Client.htm and download Paclink AGW and Paclink Post Office
and
Go to www.elcom.gr/sv2agw and download the AGWPE packet engine
or
Go to http://www.siriuscyber.net/ham/ and download Airmail
You may also need Winzip, Adobe Acrobat, and antivirus software.
![Page 7: Winlink 2000](https://reader036.vdocuments.us/reader036/viewer/2022062423/56814bb6550346895db8894f/html5/thumbnails/7.jpg)
Sound Card/Interface SetupAny SoundBlaster Compatible Sound CardRigBlaster – Serial Port Control See www.westmountainradio.com/RIGblaster.htm
RigExpert – USB Port See http://www.mixw.net/RigExpert/
Any device that can isolate radio from computer and match audio input and output levels will work Radio Shack Audio Isolation Transformers (1200 baud only!)
See http://www.patmedia.net/ralphmilnes/soundcardpacket/
![Page 8: Winlink 2000](https://reader036.vdocuments.us/reader036/viewer/2022062423/56814bb6550346895db8894f/html5/thumbnails/8.jpg)
Radio Information
Most Modern VHF radios will work at 1200 baud packet
9600 Baud Packet is possible but needs high quality radio
List of 9600 Baud radios is posted on SDGARES Web site See http://groups.yahoo.com/group/SDGARES/files/ You must be a member of the group to view
![Page 9: Winlink 2000](https://reader036.vdocuments.us/reader036/viewer/2022062423/56814bb6550346895db8894f/html5/thumbnails/9.jpg)
Radio/Sound Card Setup
ComputerSoundCard
Interface Radio
Spkr
Spkr
Mike
Mike
![Page 10: Winlink 2000](https://reader036.vdocuments.us/reader036/viewer/2022062423/56814bb6550346895db8894f/html5/thumbnails/10.jpg)
The Future
SCAMP - Sound Card Based Mode
Free Software -NO $$ TNC
Speeds approaching Pactor 3 for HF
Speeds greater than PACKET for VHF
In Alpha Tests Now, Beta testing in Feb. 2005
![Page 11: Winlink 2000](https://reader036.vdocuments.us/reader036/viewer/2022062423/56814bb6550346895db8894f/html5/thumbnails/11.jpg)
Software Choices
If you are using Paclink, go to the next slide.
If you are using Airmail, go to “Installing Airmail” slide.
![Page 12: Winlink 2000](https://reader036.vdocuments.us/reader036/viewer/2022062423/56814bb6550346895db8894f/html5/thumbnails/12.jpg)
First steps - DotNet
![Page 13: Winlink 2000](https://reader036.vdocuments.us/reader036/viewer/2022062423/56814bb6550346895db8894f/html5/thumbnails/13.jpg)
When you download the AGWPE.zip file, unzip it to a location such as c:\AGWPE so you can find it later.
Once you’ve downloaded it, Create a shortcut on your desktop for AGW Packet Engine.exe
![Page 14: Winlink 2000](https://reader036.vdocuments.us/reader036/viewer/2022062423/56814bb6550346895db8894f/html5/thumbnails/14.jpg)
Installing AGWPE
Double-Click your AGW Packet Engine shortcut.
Click Agree, then you will see the Radio Port selection box. Click “New Port”.
![Page 15: Winlink 2000](https://reader036.vdocuments.us/reader036/viewer/2022062423/56814bb6550346895db8894f/html5/thumbnails/15.jpg)
AGWPEThis is the default screen for adding a new port.
Select your Com-Port, then choose the TNC type in the drop-down box. All of the other commands should default for you without further adjustments.
![Page 16: Winlink 2000](https://reader036.vdocuments.us/reader036/viewer/2022062423/56814bb6550346895db8894f/html5/thumbnails/16.jpg)
Here, I chose my KPC-9612+. All of the other TNC Control commands are defaulted for me.
Verify your Serial port and baud rate are correct.
![Page 17: Winlink 2000](https://reader036.vdocuments.us/reader036/viewer/2022062423/56814bb6550346895db8894f/html5/thumbnails/17.jpg)
Paclink AGWWhen you run the AGW program, it will unzip to a temporary folder. After unzipping the files, simply run SETUP.EXE.
The PDF files have lots of good info on installing the software too.
![Page 18: Winlink 2000](https://reader036.vdocuments.us/reader036/viewer/2022062423/56814bb6550346895db8894f/html5/thumbnails/18.jpg)
Click Next, then choose Everyone, then choose NEXT again.
![Page 19: Winlink 2000](https://reader036.vdocuments.us/reader036/viewer/2022062423/56814bb6550346895db8894f/html5/thumbnails/19.jpg)
Click NEXT, then AGW will install. When it’s completed, you can click “CLOSE”.
![Page 20: Winlink 2000](https://reader036.vdocuments.us/reader036/viewer/2022062423/56814bb6550346895db8894f/html5/thumbnails/20.jpg)
Click Next, then choose Everyone, then choose NEXT again.
![Page 21: Winlink 2000](https://reader036.vdocuments.us/reader036/viewer/2022062423/56814bb6550346895db8894f/html5/thumbnails/21.jpg)
Click Next, then choose Close.
Note: The window to the left saysPaclink AGW – the real one willSay Paclink PostOffice.
![Page 22: Winlink 2000](https://reader036.vdocuments.us/reader036/viewer/2022062423/56814bb6550346895db8894f/html5/thumbnails/22.jpg)
Paclink Post Office Configuration
Paclink install places two icons on your desktop – the AGW and the Post Office.
Enter your callsign, and choose a password. You can also select to allow other LAN clients access to the Post Office. Click Update
![Page 23: Winlink 2000](https://reader036.vdocuments.us/reader036/viewer/2022062423/56814bb6550346895db8894f/html5/thumbnails/23.jpg)
Outlook Express is configured for you automatically, just enter your password.
![Page 24: Winlink 2000](https://reader036.vdocuments.us/reader036/viewer/2022062423/56814bb6550346895db8894f/html5/thumbnails/24.jpg)
![Page 25: Winlink 2000](https://reader036.vdocuments.us/reader036/viewer/2022062423/56814bb6550346895db8894f/html5/thumbnails/25.jpg)
![Page 26: Winlink 2000](https://reader036.vdocuments.us/reader036/viewer/2022062423/56814bb6550346895db8894f/html5/thumbnails/26.jpg)
Paclink AGW
Now it’s time for Paclink AGW. AGW is the interface between the Post Office and the AGWPE engine.
Choose “File” then “Properties” to begin configuring the AGW.
![Page 27: Winlink 2000](https://reader036.vdocuments.us/reader036/viewer/2022062423/56814bb6550346895db8894f/html5/thumbnails/27.jpg)
This is the AGW Properties screen. The only change you should make is to verify the “PATH” to the AGWPE (remember where you unzipped the files to?) is correct.
Click UPDATE.
![Page 28: Winlink 2000](https://reader036.vdocuments.us/reader036/viewer/2022062423/56814bb6550346895db8894f/html5/thumbnails/28.jpg)
Once the Properties are set, then choose “FILE, “Channels”. This is the default screen. First, select Telnet (to configure a Telnet path for Paclink.)
![Page 29: Winlink 2000](https://reader036.vdocuments.us/reader036/viewer/2022062423/56814bb6550346895db8894f/html5/thumbnails/29.jpg)
When you have an Internet connection, Paclink will use it FIRST to send and receive email. If the Internet is unavailable, it can use 2m Packet. The Telnet Properties displayed here is DIRECTLY out of the documentation. Once the entries are made, Click ADD NEW CHANNEL.
![Page 30: Winlink 2000](https://reader036.vdocuments.us/reader036/viewer/2022062423/56814bb6550346895db8894f/html5/thumbnails/30.jpg)
Next, I am adding a VHF Packet channel. I named it “N5TW”. The channel priority simply tells AGW which one to try first. (Telnet was 1, Packet is 5). Enter the Remote Callsign, and in the AGWPE port, select the Drop-Down box for the AGWPE port we just configured. I left all other options as default.
![Page 31: Winlink 2000](https://reader036.vdocuments.us/reader036/viewer/2022062423/56814bb6550346895db8894f/html5/thumbnails/31.jpg)
Directly under the Remote callsign is a Connect Script Box. This is what I used to connect to N5TW via a Digipeater.
![Page 32: Winlink 2000](https://reader036.vdocuments.us/reader036/viewer/2022062423/56814bb6550346895db8894f/html5/thumbnails/32.jpg)
Now that everything is configured, it’s time to test it.
Here, I’m testing the initial Telnet connection through my roadrunner account.
![Page 33: Winlink 2000](https://reader036.vdocuments.us/reader036/viewer/2022062423/56814bb6550346895db8894f/html5/thumbnails/33.jpg)
Next, I’m testing my VHF connection to N5TW. Once you’ve tested your connections, it’s time to send your first email.
Your email address will be your [email protected]. Open Outlook express (enter your password) and send a test email to anyone you wish. Once the email goes out through the Telnet or VHF packet path, your email will be registered with Winlink. It may take a few hours for this process to complete. Once this is done, try sending yourself an email to [email protected] . The AGW is configured to check for incoming mail every 60 minutes, but you can manually initiate a connection for testing purposes.
![Page 34: Winlink 2000](https://reader036.vdocuments.us/reader036/viewer/2022062423/56814bb6550346895db8894f/html5/thumbnails/34.jpg)
Here’s my first successful sending of a test message. Most of this information is cryptic, and you won’t need to know what it means, but you can see here the line –
K4CJX de KI5DR QTC 1
This tells the PMBO that I have one message outgoing.
Note that when you send your first email via VHF, the system assumes you are a technician and you will not be allowed access to PMBOs on HF. This will require you to send an email to K4CJX and request your registration to be changed to the proper license class.
![Page 35: Winlink 2000](https://reader036.vdocuments.us/reader036/viewer/2022062423/56814bb6550346895db8894f/html5/thumbnails/35.jpg)
Installing AirMailDownload and run Airmail.
![Page 36: Winlink 2000](https://reader036.vdocuments.us/reader036/viewer/2022062423/56814bb6550346895db8894f/html5/thumbnails/36.jpg)
Installing AirMail (cont’d)
![Page 37: Winlink 2000](https://reader036.vdocuments.us/reader036/viewer/2022062423/56814bb6550346895db8894f/html5/thumbnails/37.jpg)
Installing AirMail (cont’d)
![Page 38: Winlink 2000](https://reader036.vdocuments.us/reader036/viewer/2022062423/56814bb6550346895db8894f/html5/thumbnails/38.jpg)
Installing AirMail (cont’d)
![Page 39: Winlink 2000](https://reader036.vdocuments.us/reader036/viewer/2022062423/56814bb6550346895db8894f/html5/thumbnails/39.jpg)
Installing AirMail (cont’d)
![Page 40: Winlink 2000](https://reader036.vdocuments.us/reader036/viewer/2022062423/56814bb6550346895db8894f/html5/thumbnails/40.jpg)
Installing AirMail (cont’d)
![Page 41: Winlink 2000](https://reader036.vdocuments.us/reader036/viewer/2022062423/56814bb6550346895db8894f/html5/thumbnails/41.jpg)
Installing AirMail (cont’d)
Your installation is done. Time to send an email. Click on the “Format a new message” icon.
Click on “New” to add an address to your address book.
Select “OK” and type your message.
Click on the “Post this message for sending” icon.
Click on the “Switch to Terminal Window (F6)” icon.
![Page 42: Winlink 2000](https://reader036.vdocuments.us/reader036/viewer/2022062423/56814bb6550346895db8894f/html5/thumbnails/42.jpg)
Send an Email
![Page 43: Winlink 2000](https://reader036.vdocuments.us/reader036/viewer/2022062423/56814bb6550346895db8894f/html5/thumbnails/43.jpg)
Send an Email
![Page 44: Winlink 2000](https://reader036.vdocuments.us/reader036/viewer/2022062423/56814bb6550346895db8894f/html5/thumbnails/44.jpg)
Send an Email