wine storage design guide
TRANSCRIPT
Model 427G.
Features and specifications are subject to change at any time without notice. Visit subzero.com/specs for the most up-to-date information.
IMPORTANT NOTE: Throughout this guide, dimensions may vary by ± 1/8" (3). Dimensions in parentheses are millimeters unless otherwise specified.
Contents
3 Wine Storage
4 Specifications
12 Custom Panels
24 Full-Scale Templates
32 Warranty
subzero.com/specs | 3
Wine Storage
Wine finds a well-deserved place of honor in a Sub-Zero wine storage unit. Every detail is designed to ensure better wine preservation. Cherrywood-faced shelves, soft lighting, custom cabinetry if desired—Sub-Zero helps make a wine collection an element of beauty in the home.
WINE STORAGE MODELS
WINE STORAGE
KEY FEATURES
• Integrated, overlay, flush inset and stainless steel design options.
• Full-view glass door standard on all models.
• Freestanding model 424FSG does not require panels or surrounding cabinetry.
• Discreet interior lighting with illuminated display shelf for prized bottles of wine.
• Two independent storage zones maintain temperature, humidity and UV protection.
• Roller-assembly wine shelves with natural cherrywood facing have three-quarter extension for easy access.
• Wine shelves accommodate 750 ml bottles, half-bottles and magnums.
315W
424G
424FSG
427G
427RG
WS-30
4 | Sub-Zero Customer Care 800.222.7820
WINE STORAGE
237/8" (606) 24" (610)
34"(864)
253/8"(645)
4" (102)
13/4" (44)
151/8" (384) 24" (610)
341/16"(865)
165/8"(422)
4" (102)
13/4" (44)
Overall Dimensions
MODEL 315W
SPECIFICATIONS
STORAGE CAPACITY BOTTLES (750 ML)
315W 26424G 46424FSG 46
SHIPPING WEIGHT LB (KG)
315W 118 (54)
424G 195 (88)
424FSG 220 (100)
MODEL 424G
Overall dimensions are based on stainless steel panels and handles. Refer to page 13 for door clearance information.
subzero.com/specs | 5
WINE STORAGE
Opening Dimensions
MODELS 315W AND 424G
OPENING WIDTH
MODEL W
315W 151/4" (387)
424G 24" (610)
WOPENING WIDTH
341/2"(876)
OPENINGHEIGHT
24" (610)OPENING
DEPTH
TOP VIEW
SIDE VIEW FRONT VIEW
241/4" (616) 245/8" (625)
343/16"(868)
4" (102)
253/8"(645)
13/4" (44)
Overall Dimensions
MODEL 424FSG
Freestanding model 424FSG has a finished stainless steel exterior and handles.
6 | Sub-Zero Customer Care 800.222.7820
WINE STORAGE
27" (686)
14" (356)
13/16"(21)
80"(2032)
OPENINGHEIGHT
24" (610)
789/16"(1995)
815/16"(227)
4"(102)HEIGHT DIMENSIONS ± 1/2" (13)
24"(610)
DIMENSIONS WILL VARY WITH PANEL THICKNESS
251/2"(648)
45/8"(117)
27" (686)
14" (356)
13/16"(21)
341/2"(876)
203/8"(518)
101/4"(260)
131/4"(337)
1/2"(13)
3/8"(10)
80"(2032)
OPENINGHEIGHT
24" (610)
789/16"(1995)
93/4"(248)
4"(102)HEIGHT DIMENSIONS ± 1/2" (13)
24"(610)
DIMENSIONS WILL VARY WITH PANEL THICKNESS
191/2"(495)
251/2"(648)
45/8"(117)
Overall Dimensions
MODEL 427G
Overall dimensions do not include panels or handles. Dimensions will vary with panel thickness.
MODEL 427RG
SPECIFICATIONS
STORAGE CAPACITY R CU FT (L) BOTTLES (750 ML)
427G 132427RG 5.3 (150) 78
SHIPPING WEIGHT LB (KG)
427G 395 (179)
427RG 410 (186)
subzero.com/specs | 7
WINE STORAGE
OPENING DIMENSIONS
MODEL W H
427G 27" (686) 80" (2032)
427RG 27" (686) 80" (2032)
The depth of each integrated model is 24" (610). Allow for panel thickness when planning the finished opening depth.
DUAL INSTALLATION
When installing two integrated units (models 427G and 427RG) side by side in a dual installation, the opening width is the width of the two units added together. A dual installa-tion kit will be required for this installation. If a dual instal-lation kit is not specified, a minimum 2" (51) filler strip is required between units.
Dual installation kits are available through an authorized Sub-Zero dealer. For local dealer information, visit the find a showroom section of our website, subzero.com. For ques-tions regarding the installation, call Sub-Zero customer care at 800-222-7820.
Opening Dimensions
MODELS 427G AND 427RG
25" (635)OPENING
DEPTH
WOPENING WIDTH
HOPENINGHEIGHT
SIDE VIEW
TOP VIEW
FRONT VIEW
8 | Sub-Zero Customer Care 800.222.7820
WINE STORAGE
Opening Dimensions
MODEL WS-30 STANDARD INSTALLATION
OPENING WIDTH
MODEL W
WS-30 291/2" (749)
If an 83" (2108) grille height is specified, the opening height must be decreased by 7/8" (22). If an 88" (2235) grille height is specified, the opening height must be increased by 4" (102).
If two units are installed side by side, refer to page 10 for dual standard installations.
30" (762)
84"(2134)
4" (102)
733/4"(1873)
237/8"(606)
311/4"(796)
17"(432)
237/8" (606)
23/8" (60)
HEIGHT DIMENSIONS ± 1/2" (13)
263/16" (665)
Overall Dimensions
MODEL WS-30
SPECIFICATIONS
STORAGE CAPACITY BOTTLES (750 ML)
WS-30 147
SHIPPING WEIGHT LB (KG)
WS-30 445 (202)
Overall dimensions are based on the stainless steel model. For flush inset applications, add 1/2" (13) to door clearance dimensions.
833/4"(2127)
OPENINGHEIGHT
24" (610)OPENING
DEPTH
NOTE: Shaded line represents profile of unit.
FRONT VIEWSIDE VIEW
TOP VIEW
WOPENING WIDTH
subzero.com/specs | 9
WINE STORAGE
Opening Dimensions
MODEL WS-30 FLUSH INSET INSTALLATION
FLUSH INSET WIDTH
MODEL W
WS-30 32" (813)
Dimensions assume a 3/4" (19) panel thickness.
If an 83" (2108) grille height is specified, the flush inset height must be decreased by 7/8" (22). If an 88" (2235) grille height is specified, the flush inset height must be increased by 4" (102).
If two units are installed side by side, refer to page 11 for dual flush inset installations.
84"(2134)FLUSHINSET
HEIGHT
1/4"(6)
263/16"(665)
FLUSHINSETDEPTH
23/16"(56)
*3" (76) typical depth. Shaded areas will be visible and should be finished to match cabinetry.
NOTE: Shaded line represents profile of unit with 3/4" (19) panel.
FRONT VIEWSIDE VIEW
TOP VIEW
FINISHEDCLEATS*
11/4"(32)
WFLUSH INSET WIDTH
4" (102)
11/4"(32)
23/16"(56)
3"(76)*
TYPICAL
10 | Sub-Zero Customer Care 800.222.7820
Opening Dimensions
MODEL WS-30 DUAL STANDARD INSTALLATION
833/4"(2127)
OPENINGHEIGHT
24" (610)OPENING
DEPTH
NOTE: Shaded line represents profile of unit.
FRONT VIEWSIDE VIEW
TOP VIEW
WOPENING WIDTH
OPENING WIDTH
MODELS W
WS-30 and 30" Built-In 593/4" (1518)
WS-30 and 36" Built-In 653/4" (1670)
A dual installation kit will be required for this installation.
WINE STORAGE
subzero.com/specs | 11
Opening Dimensions
MODEL WS-30 DUAL FLUSH INSET INSTALLATION
84"(2134)FLUSHINSET
HEIGHT
1/4"(6)
263/16"(665)
FLUSHINSETDEPTH
23/16"(56)
*3" (76) typical depth. Shaded areas will be visible and should be finished to match cabinetry.
NOTE: Shaded line represents profile of unit with 3/4" (19) panel.
FRONT VIEWSIDE VIEW
TOP VIEW
FINISHEDCLEATS*
11/4"(32)
WFLUSH INSET WIDTH
4" (102)
11/4"(32)
23/16"(56)
3"(76)*
TYPICAL
FLUSH INSET WIDTH
MODELS W
WS-30 and 30" Built-In 621/4" (1581)
WS-30 and 36" Built-In 681/4" (1734)
Dimensions assume a 3/4" (19) panel thickness. A dual instal-lation kit will be required for this installation.
WINE STORAGE
12 | Sub-Zero Customer Care 800.222.7820
WINE STORAGE
Custom Panels
For framed, overlay, integrated and flush inset applications, custom door panels must be provided. Handle hardware must also be provided for overlay, integrated and flush inset applications. Refer to panel requirements and custom panel dimensions charts for your specific model and design application.
Do not install a solid panel on a glass door unit. A solid door is available as a sales accessory (except model 315W and WS-30) and must be installed if a solid panel is being speci-fied. Service may be required to install the door. Contact an authorized Sub-Zero dealer for more information. Overall dimensions are the same for glass and solid door panels.
Finish all sides of the custom panels. They may be visible when the door is open or through the window of glass door models.
Model 424FSG has a finished stainless steel exterior that is designed to be used in a freestanding application.
Electrical
The electrical supply should be located within the shaded area shown in the illustration for your specific model. For model 315W, the electrical supply can be located anywhere on the back wall of the opening. A separate circuit, servicing only this appliance is required. A ground fault circuit inter-rupter (GFCI) is not recommended and may cause interrup-tion of operation.
If the unit will be connected to a home security system, allow 36" (914) of excess wiring for proper connection.
IMPORTANT NOTE: For models 427G and 427RG, it is critical the electrical outlet be positioned with the grounding prong to the right of the thinner blades.
Installation must comply with all applicable electrical codes.
ELECTRICAL REQUIREMENTS
Electrical Supply 115 VAC, 60 Hz
Service 15 amp
Receptacle 3-prong grounding-type
3" (76)
151/2"(394)
2"(51)
LEFT SIDEOF OPENING
FLOOR
13" (330)
1/4"(6)
41/2"(114)
LEFT SIDEOF OPENING
FLOOR
21/2" (64)
Model 424G.
Models 427G and 427RG.
751/2" (1918)FROM FLOOR
7"(178) E
6"(152)
RIGHT SIDEOF OPENING
Model WS-30.
subzero.com/specs | 13
WINE STORAGE
Custom Panels—315W and 424G
For models 315W and 424G, the custom door panel will attach directly to the door frame with screws through a series of pre-drilled holes.
Refer to the charts for panel requirements and dimensions.
PANEL REQUIREMENTS
PANEL WEIGHT MAX
315W 10 lb (5 kg)
424G 10 lb (5 kg)
PANEL THICKNESS MIN
All Panels 5/8" (16)
OVERLAY PANEL DIMENSIONS
H
W
A A
A
A
315W / 424G
PANEL DIMENSIONS
MODEL W H
315W 15" (381) 301/16" (764)
424G 233/4" (603) 301/16" (764)
STILES / RAILS (MIN) A
315W 21/4" (57) 424G 21/4" (57)
DOOR CLEARANCE
Models 315W and 424G can be installed flush with sur-rounding cabinetry. Depending on the thickness of the overlay door panel, it may be necessary to install the unit 1/4" (6) beyond the front surface of adjacent cabinetry to prevent interference when the door is opened to 145°. Refer to the full-scale template on page 23.
14 | Sub-Zero Customer Care 800.222.7820
WINE STORAGE
Custom Panels—427G and 427RG
For models 427G and 427RG, the custom door panel will attach directly to the door with screws through a series of pre-drilled holes. For model 427RG, the drawer panels will attach using mounting brackets supplied with the unit. Refer to the panel requirements chart and integrated panel dimensions.
The thickness of the custom panel can vary. A minimum 5/8" (16) thick panel is required, but the thickness can be increased provided it does not exceed the weight limit. The depth of each model is 24" (610). Allow for panel thickness when planning the finished opening depth.
CAUTION
When using a 3/4" (19) or thicker panel with a reveal less than 1/4" (6), panel may cause damage to the unit when door is opened to 105°. Use the built-in 90° door stop.
CAUTION
As reveals between cabinetry and the unit decrease, severe finger pinching can occur while door is closing.
PANEL REQUIREMENTS
PANEL WEIGHT MAX
Door 20 lb (9 kg)
Drawer (427RG) 12 lb (5 kg)
PANEL THICKNESS MIN
All Panels 5/8" (16)
Finish all sides of custom panels. They will be visible when the door/drawer is open.
D-style handles are recommended. Door handles must be located near the edge of the panel opposite the hinge and should be centered top to bottom. Drawer handles must be located near the top edge of each panel. Stainless steel tubular and pro handles are avail able through an authorized Sub-Zero dealer. For local dealer information, visit the find a showroom section of our website, subzero.com.
An optional lock kit is available for models 427G and 427RG. Review the lock kit instructions to ensure your panels will allow for adequate installation. These instructions are available on our website, subzero.com/specs.
subzero.com/specs | 15
WINE STORAGE
Custom Panels—427G and 427RG
INTEGRATED PANEL DIMENSIONS
W
453/8"(1153)
139/16"(345)
1611/16" (424)
W
757/8"(1927)
B
C
AA
B
C
AA
427G
427RG
Typical panel dimensions are based on an 80" (2032) overall height, 4" (102) toe kick and 1/8" (3) reveals. Panel dimen-sions must be adjusted accordingly for all other installations. Refer to the illustration for panel heights and the chart below for panel widths.
PANEL WIDTH
MODEL W
427G 263/4" (679)
427RG 263/4" (679)
STILES / RAILS (MIN) A B C
427G 21/4" (57) 33/4" (95) 8" (203)
427RG 21/4" (57) 33/4" (95) 3" (76)
DUAL INSTALLATION
For dual installations, refer to the illustration for panel heights and the chart below for panel widths.
PANEL WIDTH
MODEL W
427G 2613/16" (681)
427RG 2613/16" (681)
STILES / RAILS (MIN) A B C
427G 21/4" (57) 33/4" (95) 8" (203)
427RG 21/4" (57) 33/4" (95) 3" (76)
16 | Sub-Zero Customer Care 800.222.7820
WINE STORAGE
Custom Panels—427G and 427RG
DOOR PANEL HEIGHT
The height of the custom door panel can extend beyond the typical panel height, provided it does not exceed the weight limit. Refer to the illustration below.
TOE KICK CLEARANCE
The height of the toe kick area can extend beyond the typical toe kick height, provided it does not exceed the dimensions in the illustration below.
INTEGRATED UNIT(SIDE VIEW)
11/2"(38)
25" (635) TO WALL
HINGE
DECORATIVE VALANCECANNOT EXTEND BEYOND
THE FRONT OF THE MOLDING
DECORATIVE VALANCE
REMOVABLE MOLDING
TYPICALHEIGHT
OF DOORPANEL
MINIMUMHEIGHT
OVERALLHEIGHT
1/8" (3)
1/8" (3)
DOORPANEL
Upper valance—side view.
25" (635) TO WALL
HEIGHTOF PANEL
INTEGRATED UNIT(SIDE VIEW)
25/8" (67) TO 4" (102)
BASE MOLDINGMUST BE
REMOVABLE—4" (102) MAX
HEIGHT
KICKPLATE / GRILLECAN BE ADJUSTED
FORWARD
KICKPLATE / GRILLE
4" (102) TO 9" (229)FROM FLOOR
Toe kick—side view.
subzero.com/specs | 17
WINE STORAGE
Custom Panels—WS-30
FRAMED PANEL
The framed application is an overlay model with framed design features. It is not a separate model.
If the custom panel is thinner than 1/4" (6), a filler material must be added to achieve a proper fit. If the panel is thicker than 1/4" (6), rout an edge around the panel or mount the custom panel on a sheet of 1/4" (6) thick material and insert into the channel.
Routing, recessing and optional extended handles may be required for finger clearance. Refer to the full-scale template on page 26.
PANEL REQUIREMENTS
PANEL WEIGHT MAX
Door 75 lb (34 kg)
Grille (optional) 13 lb (6 kg)
PANEL THICKNESS MIN
Framed 1/4" (6)
FRAMED PANEL DIMENSIONS
H
H
W
A A
A
A
WS-30
FRAMED PANELS
PANEL W H
Door 293/4" (756) 699/16" (1767)
Grille (optional) 293/4" (756) 815/16" (227)
STILES / RAILS A
Minimum 31/8" (79)
18 | Sub-Zero Customer Care 800.222.7820
WINE STORAGE
Custom Panels—WS-30
OVERLAY PANELS
Overlay panels are typically created by combining a 3/4" (19) custom panel, a .10" (3) spacer panel and a 1/4" (6) backer panel. Refer to the illustrations below.
PANEL REQUIREMENTS
PANEL WEIGHT MAX
Door 75 lb (34 kg)
Grille 13 lb (6 kg)
PANEL THICKNESS MIN
Overlay 5/8" (16)
1/8"(3)
CUSTOM PANEL
SPACER PANEL
BACKER PANEL
TRIM
5/16" (8) min
DOOR FRAME GLASS
1/4" (6).10" (3)
CUSTOMPANEL
SPACERPANEL
BACKERPANEL
3/4"(19)
typical
Panel assembly cross section (overlay).
Panel assembly rear view.
OVERLAY PANEL DIMENSIONS
H
H
W
A A
A
A
WS-30
OVERLAY PANELS
DOOR W H
Overlay Panel 30" (762) 693/4" (1772)
Spacer Panel 291/8" (740) 6815/16" (1751)
Backer Panel 293/4" (756) 699/16" (1767)
STILES / RAILS A
Minimum 31/4" (83)
GRILLE W H
Overlay Panel 30" (762) 91/4" (235)*Spacer Panel 291/8" (740) 85/16" (211)
Backer Panel 293/4" (756) 815/16" (227)
*Panel height may be increased by 7/16" (11) to hide upper main frame. For more information, refer to the built-in panel configurator at subzero.com/trade/panels.
Grille panel dimensions are for standard 84" (2134) overall unit height. For 83" (2108) height, subtract 1" (25) from grille panel height dimensions and for 88" (2235) height, add 4" (102). A specific panel grille must be ordered for an 83" or 88" overall unit height.
subzero.com/specs | 19
WINE STORAGE
Custom Panels—WS-30
FLUSH INSET PANELS
The flush inset application is an overlay model with flush inset panels. It is not a separate model.
The flush inset design allows custom panels to be installed flush with adjacent cabinets. Similar to overlay, flush inset panels are typically created by combining a 3/4" (19) custom panel, a .10" (3) spacer panel and a 1/4" (6) backer panel. Refer to the illustrations for overlay panels on the previous page.
For flush inset panels thicker than 3/4" (19), a 90° door stop may be required to prevent interference with adjacent cabi-nets. Refer to the full-scale template on page 29.
PANEL REQUIREMENTS
PANEL WEIGHT MAX
Door 75 lb (34 kg)
Grille 13 lb (6 kg)
PANEL THICKNESS MIN
Flush Inset 5/8" (16)
FLUSH INSET PANEL DIMENSIONS
H
H
W
A A
A
A
WS-30
FLUSH INSET PANELS
DOOR W H
Flush Inset Panel 31" (787) 693/4" (1772)
Spacer Panel 291/8" (740) 6815/16" (1751)
Backer Panel 293/4" (756) 699/16" (1767)
STILES / RAILS A
Minimum 33/4" (95)
GRILLE W H
Flush Inset Panel 31" (787) 91/4" (235)
Spacer Panel 291/8" (740) 85/16" (211)
Backer Panel 293/4" (756) 815/16" (227)
Grille panel dimensions are for standard 84" (2134) overall unit height. For 83" (2108) height, subtract 1" (25) from grille panel height dimensions and for 88" (2235) height, add 4" (102). A specific panel grille must be ordered for an 83" or 88" overall unit height.
20 | Sub-Zero Customer Care 800.222.7820
WINE STORAGE
Custom Panels—WS-30
FLUSH INSET PANEL OFFSETS
The illustrations provide panel offsets and reveals for model WS-30 in a flush inset application. Refer to the chart below for reference to the illustrations.
PANEL OFFSET
FLUSH INSET ILLUS
Door / Grille Sides AGrille Top BGrille Bottom / Door Top CDoor Bottom D
5/8"(16)
5/8" (16)
5/16" (8) 1/2"(13)
5/32"(4)
5/16"(8)
5/16"(8)
3/32"(2)
DOOR
DRAWER
5/16"(8)
3/32"(2)
DOOR /DRAWER
1/2" (13)
3/32"(2)
5/16"(8)
5/16"(8)
5/32"(4)
GRILLE
DOOR
1/4" (6)REVEAL
5/16" (8)1/8" (3)
FLUSH INSET PANEL
SPACER
BACKERDOOR DOOR
DOOR / DRAWER / GRILLE
1/2" (13)
5/16"(8)
1/8"(3)
CABINETRY
GRILLE
TOP VIEWTOP VIEW
SIDE VIEW SIDE VIEW
SIDE VIEW SIDE VIEW
CABINETRY
5/8"(16)
5/8" (16)
5/16" (8) 1/2"(13)
5/32"(4)
5/16"(8)
5/16"(8)
3/32"(2)
DOOR
DRAWER
5/16"(8)
3/32"(2)
DOOR /DRAWER
1/2" (13)
3/32"(2)
5/16"(8)
5/16"(8)
5/32"(4)
GRILLE
DOOR
1/4" (6)REVEAL
5/16" (8)1/8" (3)
FLUSH INSET PANEL
SPACER
BACKERDOOR DOOR
DOOR / DRAWER / GRILLE
1/2" (13)
5/16"(8)
1/8"(3)
CABINETRY
GRILLE
TOP VIEWTOP VIEW
SIDE VIEW SIDE VIEW
SIDE VIEW SIDE VIEW
CABINETRY
Illus. A
Illus. B
5/8"(16)
5/8" (16)
5/16" (8) 1/2"(13)
5/32"(4)
5/16"(8)
5/16"(8)
3/32"(2)
DOOR
DRAWER
5/16"(8)
3/32"(2)
DOOR /DRAWER
1/2" (13)
3/32"(2)
5/16"(8)
5/16"(8)
5/32"(4)
GRILLE
DOOR
1/4" (6)REVEAL
5/16" (8)1/8" (3)
FLUSH INSET PANEL
SPACER
BACKERDOOR DOOR
DOOR / DRAWER / GRILLE
1/2" (13)
5/16"(8)
1/8"(3)
CABINETRY
GRILLE
TOP VIEWTOP VIEW
SIDE VIEW SIDE VIEW
SIDE VIEW SIDE VIEW
CABINETRY
5/8"(16)
5/8" (16)
5/16" (8) 1/2"(13)
5/32"(4)
5/16"(8)
5/16"(8)
3/32"(2)
DOOR
DRAWER
5/16"(8)
3/32"(2)
DOOR /DRAWER
1/2" (13)
3/32"(2)
5/16"(8)
5/16"(8)
5/32"(4)
GRILLE
DOOR
1/4" (6)REVEAL
5/16" (8)1/8" (3)
FLUSH INSET PANEL
SPACER
BACKERDOOR DOOR
DOOR / DRAWER / GRILLE
1/2" (13)
5/16"(8)
1/8"(3)
CABINETRY
GRILLE
TOP VIEWTOP VIEW
SIDE VIEW SIDE VIEW
SIDE VIEW SIDE VIEW
CABINETRY
Illus. C
Illus. D
subzero.com/specs | 21
WINE STORAGE
DUAL FLUSH INSET PANEL DIMENSIONS
H
H
W
A A
A
A
WS-30
MODEL WS-30
DOOR W H
Flush Inset Panel 301/2" (775) 693/4" (1772)
Spacer Panel 291/8" (740) 6815/16" (1751)
Backer Panel 293/4" (756) 699/16" (1767)
STILES / RAILS A
Minimum 33/4" (95)
GRILLE W H
Flush Inset Panel 301/2" (775) 91/4" (235)
Spacer Panel 291/8" (740) 85/16" (211)
Backer Panel 293/4" (756) 815/16" (227)
Grille panel dimensions are for standard 84" (2134) overall unit height. For 83" (2108) height, subtract 1" (25) from grille panel height dimensions and for 88" (2235) height, add 4" (102). A specific panel grille must be ordered for an 83" or 88" overall unit height.
Custom Panels—WS-30
DUAL INSTALLATIONS
If two models WS-30 or a model WS-30 and built-in unit are installed side by side, a dual installation kit may be required. Installations without a custom filler strip require a dual instal-lation kit. If a dual installation kit is not specified, a 2" (51) filler strip is recommended between units. Dual installations without a filler strip can only be accomplished using two units with opposite hinges. Refer to the illustrations below.
Dual installation kits are available through an authorized Sub-Zero dealer. For local dealer information, visit the find a showroom section of our website, subzero.com. For ques-tions regarding the installation, call Sub-Zero customer care at 800-222-7820.
For dual standard installations, panel dimensions are the same as for single installations. Refer to the chart on the previous page. Panel dimensions and offsets for dual flush inset installations are listed on the following pages.
WITHOUT FILLER STRIP FILLER STRIP
Opposite hinges.
Same side hinges.
22 | Sub-Zero Customer Care 800.222.7820
WINE STORAGE
Custom Panels—WS-30
DUAL FLUSH INSET PANEL OFFSETS
The illustrations provide panel offsets and reveals for model WS-30 in a dual flush inset application. Refer to the chart below for reference to the illustrations.
PANEL OFFSET
DUAL FLUSH INSET ILLUS
Door (hinge) / Grille Sides ADoor (handle) Sides BGrille Top CGrille Bottom / Door Top DDoor Bottom E
5/8"(16)
5/8" (16)
5/16" (8) 1/2"(13)
5/32"(4)
5/16"(8)
5/16"(8)
3/32"(2)
DOOR
DRAWER
5/16"(8)
3/32"(2)
DOOR /DRAWER
1/2" (13)
3/32"(2)
5/16"(8)
5/16"(8)
5/32"(4)
GRILLE
DOOR
1/4" (6)REVEAL
5/16" (8)1/8" (3)
FLUSH INSET PANEL
SPACER
BACKERDOOR DOOR
DOOR / DRAWER / GRILLE
1/2" (13)
5/16"(8)
1/8"(3)
CABINETRY
GRILLE
TOP VIEWTOP VIEW
SIDE VIEW SIDE VIEW
SIDE VIEW SIDE VIEW
CABINETRY
DUALTRIM
1/4" (6)REVEAL
5/16" (8)1/8" (3)
DOOR DOOR
TOP VIEW
Illus. A
Illus. B
5/8"(16)
5/8" (16)
5/16" (8) 1/2"(13)
5/32"(4)
5/16"(8)
5/16"(8)
3/32"(2)
DOOR
DRAWER
5/16"(8)
3/32"(2)
DOOR /DRAWER
1/2" (13)
3/32"(2)
5/16"(8)
5/16"(8)
5/32"(4)
GRILLE
DOOR
1/4" (6)REVEAL
5/16" (8)1/8" (3)
FLUSH INSET PANEL
SPACER
BACKERDOOR DOOR
DOOR / DRAWER / GRILLE
1/2" (13)
5/16"(8)
1/8"(3)
CABINETRY
GRILLE
TOP VIEWTOP VIEW
SIDE VIEW SIDE VIEW
SIDE VIEW SIDE VIEW
CABINETRY
5/8"(16)
5/8" (16)
5/16" (8) 1/2"(13)
5/32"(4)
5/16"(8)
5/16"(8)
3/32"(2)
DOOR
DRAWER
5/16"(8)
3/32"(2)
DOOR /DRAWER
1/2" (13)
3/32"(2)
5/16"(8)
5/16"(8)
5/32"(4)
GRILLE
DOOR
1/4" (6)REVEAL
5/16" (8)1/8" (3)
FLUSH INSET PANEL
SPACER
BACKERDOOR DOOR
DOOR / DRAWER / GRILLE
1/2" (13)
5/16"(8)
1/8"(3)
CABINETRY
GRILLE
TOP VIEWTOP VIEW
SIDE VIEW SIDE VIEW
SIDE VIEW SIDE VIEW
CABINETRY
Illus. C
Illus. D
5/8"(16)
5/8" (16)
5/16" (8) 1/2"(13)
5/32"(4)
5/16"(8)
5/16"(8)
3/32"(2)
DOOR
DRAWER
5/16"(8)
3/32"(2)
DOOR /DRAWER
1/2" (13)
3/32"(2)
5/16"(8)
5/16"(8)
5/32"(4)
GRILLE
DOOR
1/4" (6)REVEAL
5/16" (8)1/8" (3)
FLUSH INSET PANEL
SPACER
BACKERDOOR DOOR
DOOR / DRAWER / GRILLE
1/2" (13)
5/16"(8)
1/8"(3)
CABINETRY
GRILLE
TOP VIEWTOP VIEW
SIDE VIEW SIDE VIEW
SIDE VIEW SIDE VIEW
CABINETRY
Illus. E
subzero.com/specs | 23
WINE STORAGE
Custom Panels—WS-30
SIDE PANEL
The custom side panel must be a minimum of 24" (610) deep and 1/2" (13) thick. Routing will be necessary for the side panel to fit flush against the side of the unit. Refer to the illustrations below.
When installing model WS-30 with a custom side panel, an accessory kit is required. Stainless steel and white enamel side panels are available through an authorized Sub-Zero dealer. For local dealer information, visit the find a show-room section of our website, subzero.com.
84"(2134)
24" (610)
OPTIONALTOE KICKCUT-OUT
4" (102)
17/8"(48)
1" (25)
ROUT TO 1/8" (3)
FRONTOF SIDEPANEL
25/8"(67)
MAINFRAME
SIDE PANELROUTING
1" (25)
17/8" (48)
1/8" (3)
1/2" (13)
Side panel dimensions.
Routing detail.
Handle Hardware
Optional stainless steel tubular and pro handles are avail-able through an authorized Sub-Zero dealer. For local dealer information, visit the find a showroom section of our website, subzero.com.
Refer to the chart below for the length and stud spacing of standard handles for wine storage models.
STANDARD HANDLES
315W, 424G, 424FSG LENGTH STUD SPACING
Tubular 243/16" (614) 161/4" (413)
Pro 21" (533) 1911/16" (500)
427RG (DRAWER) LENGTH STUD SPACING
Tubular 243/16" (614) 161/4" (413)
Pro 21" (533) 1911/16" (500)
427G, 427RG (DOOR) LENGTH STUD SPACING
Tubular 413/16" (1046) 331/4" (845)
Pro 399/16" (1006) 385/16" (973)
WS-30 LENGTH STUD SPACING
Tubular 637/8" (1622) 437/8" (1114)
Pro 453/16" (1147) 437/8" (1114)
24 | Sub-Zero Customer Care 800.222.7820
WINE STORAGE
Wine Shelf Wood Facing
FULL-SCALE TEMPLATE
The natural cherrywood facing on wine storage shelves can be stained and sealed or replaced with wood more comple-mentary to surrounding cabinetry. Refer to the full-scale template and chart for dimensions.
A (WIDTH)
11/2" (38)
5/8" (16)
7/64" (3)
5/64" (2)
23/64" (9)
9/16" (14)
27/32" (21)
MAXIMUM THICKNESS
FRONT VIEW SIDE VIEW
Wine shelf wood facing.
WIDTH
MODEL W
315W 1015/16" (278)
424G, 424FSG 191/2" (495)
427G, 427RG 2015/16" (532)
WS-30 249/16" (624)
subzero.com/specs | 25
WINE STORAGE
DOOR CLOSED
UNDERCOUNTERUNIT
ADJACENTCABINETRY
3/4" (19) DOOR PANEL
1/2"(13)
1/8" (3)
HINGE DETENTAT 145° OPENING
(DOOR OPENS PAST 145°)
1/4" (6)
1" (25)0"
SCALE
145° door opening (top view).
Door Clearance—315W and 424G
FULL-SCALE TEMPLATE
To allow for a 145° door opening, the unit should extend a minimum of 1/4" (6) beyond the front surface of adja-cent cabinetry. The unit can be installed flush, however, there is potential for interference with the panel if the door is opened past 90°.
26 | Sub-Zero Customer Care 800.222.7820
Framed Panel—WS-30
FULL-SCALE TEMPLATE
OPTIONAL EXTENDEDFULL-LENGTH HANDLE
STANDARDFULL-LENGTH HANDLE
1/4" (6) FRAMED PANEL
DOOR
1"(25)
3"(76)
11/4" (32) PANEL
1" (25) PANEL
1/2" (13) PANEL
3/4" (19) PANEL
2"(51)
Framed panel thickness.
WINE STORAGE
subzero.com/specs | 27
Overlay and Flush Inset Panels—WS-30
FULL-SCALE TEMPLATE
Overlay and flush inset panels must be a minimum of 5/8"
(16) thick to support mounting the handle. Panel thickness does not include backer and spacer panel. Mount handle close to the opening edge of the door.
Overlay and flush inset panel thickness.
1/4" (6) BACKER PANEL
DOOR
DEPTH OF TUBULARAND PRO HANDLES
1"(25)
3"(76)
11/4" (32) PANEL
1" (25) PANEL
3/4" (19) PANEL
2"(51)
.10" (3) SPACER PANEL
WINE STORAGE
28 | Sub-Zero Customer Care 800.222.7820
WINE STORAGE
237/8" (606)TO REAR OF UNIT
OVERALL WIDTH OF UNIT
11/4" (32)
11/2" (38)
13/4" (44)
0" (0)
1" (25)
2" (51)
21/4" (57)
21/2" (63)
23/4" (70)
3" (76)
31/4" (83)
31/2" (89)
1/4" (6)
1/2" (13)
3/4" (19)
3/4" (19) THICKOVERLAY PANEL
(TYPICAL)
1/4" (6) BACKERPANEL
1" (25) THICKPANEL
1" (25)0"
SCALE
90° door opening (top view).
Overlay Application—WS-30
FULL-SCALE TEMPLATE
subzero.com/specs | 29
WINE STORAGE
11/4" (32)
ASSUMES3/4" (19)
FLUSH INSETPANEL
THICKNESS
23/16" (56)
24" (610)TO BACK WALL
3/4" (19) THICKFLUSH INSET PANEL
(TYPICAL)
1/4" (6) BACKERPANEL
1" (25) THICKPANEL
1" (25)0"
SCALE
110° door opening (top view).
Flush Inset Application—WS-30
FULL-SCALE TEMPLATE
For panels thicker than 3/4" (19), a 90° door stop may be required to prevent interference with adjacent cabinets.
30 | Sub-Zero Customer Care 800.222.7820
WINE STORAGE
11/4" (32)
FILLER STRIP
APPROX PROFILE OFSTAINLESS STEEL WRAPPED
DOOR AND HANDLE
DOOROPEN 110°
DOORCLOSED
Dual standard installation (top view).
Dual Standard Installation—WS-30
FULL-SCALE TEMPLATE
Typical framed, overlay or stainless steel dual installation with filler strip at maximum 110° door opening. Panel thick-ness may require a 90° door stop.
1" (25)0"
SCALE
subzero.com/specs | 31
WINE STORAGE
11/2" (38)
1/2" (13)
FILLER STRIP
PROFILE OF 3/4" (19) FLUSH INSET PANELAND TUBULAR HANDLE
DOORCLOSED
DOOROPEN 110°
Dual flush inset installation (top view).
Dual Flush Inset Installation—WS-30
FULL-SCALE TEMPLATE
Typical flush inset dual installation with filler strip at max-imum 110° door opening. Panel thickness may require a 90° door stop.
1" (25)0"
SCALE
Sub-Zero Residential Limited Warranty
FOR RESIDENTIAL USE
FULL TWO YEAR WARRANTY*
For two years from the date of original installation, this Sub-Zero product warranty covers all parts and labor to repair or replace, under normal residential use, any part of the product that proves to be defec-tive in materials or workmanship. All service provided by Sub-Zero under the above warranty must be performed by Sub-Zero factory certified service, unless otherwise specified by Sub-Zero, Inc. Service will be provided during normal business hours.
FULL FIVE YEAR SEALED SYSTEM WARRANTY
For five years from the date of original installation, this Sub-Zero product warranty covers all parts and labor to repair or replace, under normal residential use, these parts that prove to be defective in materials or workmanship: compressor, condenser, evaporator, drier and all connecting tubing. All service provided by Sub-Zero under the above warranty must be performed by Sub-Zero factory certified service, unless otherwise specified by Sub-Zero, Inc. Service will be provided during normal business hours.
LIMITED TWELVE YEAR SEALED SYSTEM WARRANTY
For twelve years from the date of original installation, Sub-Zero will repair or replace the following parts that prove to be defective in materials or workmanship: compressor, condenser, evaporator, drier and all connecting tubing. If the owner uses Sub-Zero factory certified service, the service provider will repair or replace these parts with the owner paying for all other costs, including labor. If the owner uses non-certi-fied service, the owner must contact Sub-Zero, Inc. (using the information below) to receive repaired or replacement parts. Sub-Zero will not reimburse the owner for parts purchased from non-certified service or other sources.
TERMS APPLICABLE TO EACH WARRANTY
The warranty applies only to products installed for normal residential use. The warranty applies only to products installed in any one of the fifty states of the United States, the District of Columbia or the ten provinces of Canada. This warranty does not cover any parts or labor to correct any defect caused by negligence, accident or improper use, maintenance, installation, service or repair.
THE REMEDIES DESCRIBED ABOVE FOR EACH WARRANTY ARE THE ONLY ONES THAT SUB-ZERO, INC. WILL PROVIDE, EITHER UNDER THIS WARRANTY OR UNDER ANY WARRANTY ARISING BY OPERATION OF LAW. SUB-ZERO, INC. WILL NOT BE RESPONSIBLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES ARISING FROM THE BREACH OF THIS WARRANTY OR ANY OTHER WARRANTY, WHETHER EXPRESS, IMPLIED OR STATUTORY.
Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights and you may also have other legal rights that vary from state to state.
To receive parts and/or service and the name of Sub-Zero factory certified service nearest you, contact Sub-Zero, Inc., P.O. Box 44848, Madison, WI 53744; check the contact & support section of our website, subzero.com, email us at [email protected] or call 800-222-7820.
*Stainless steel (doors, panels, handles, product frames and interior surfaces) are covered by a limited 60-day parts and labor warranty for cosmetic defects.
*Replacement water filters and air purification cartridges are not covered by the product warranty.
Sub-Zero, Sub-Zero & Design, Dual Refrigeration, Constant Care, The Living Kitchen, Great American Kitchens The Fine Art of Kitchen Design, and Ingredients are registered trade-marks and service marks of Sub-Zero, Inc. Wolf, Wolf & Design, Wolf Gourmet, W & Design and the color red as applied to knobs are registered trademarks and service marks of Wolf Appliance, Inc. (collectively, the “Company Marks.”) All other trademarks or registered trademarks are property of their respective owners in the United States and other countries.