WiFi settings for WINDOWS 7

Step 1: Open Network and Sharing Center

Right-click mouse button on the wireless network icon in the taskbar (bottom right on the desktop). Select Open Network and Sharing Center:

You can also find your network connections :by clicking the Start button → clicking Control Panel → clicking Network and Internet → clicking Network and Sharing Center

Step 2: The following pop-up box should emerge and click on “Set up a new connection or network”:

Step 3: Select “Manually connect to a wireless network” and click on “Next”

Step 4: Do the setting as follows and click on “Next” (Note: Network name is case-sensitive.)

Step 5: After adding the wireless network IITG_WIFI successfully, click on the “Change connection settings”. Pop-up window will appear.

Step 6: Select Security tab and Choose network authentication method as “Cisco:PEAP” ,then click on “Settings”.

If “Cisco:PEAP” is not available in the list, then please follow the manual “Windows 7 (for not supporting Cisco:PEAP)" available in the Wi-Fi manual page

Step 7: Deselect check box “Use anonymous outer identity” and “Validate server certificate” asfollows and then click on “User Credentials” tab

Step 8: Do the setting as below and click on “OK”

Step 9: Click on “Advanced Settings” and select “Specify authentication mode ” as “User authentication” and click on “OK”

Step 10: Once Clicking OK on the previously opened window “IITG_WIFI wireless networking properties ” the following window will pop-up.

Step 11: Enter your IITG Webmail Username and Password and get connected to IITG_WIFI.

Note: • Steps 1 to 10 are one time settings and Step 11 needs

to perform every time you connect to IITG_WIFI

• After connecting to IITG_WIFI, do the proxy settings (if required)

• Report any connection problem to netadmin@iitg.ernet.in