wilton drilling jet drilling - :: cecuamaqcecuamaq.com/pdf/wilton taladros pedestal.pdf · 92...

JE

T D

RIL

LIN

G

jettools.com90

DRILLING WILTO

N D

RILLIN

G

Belt Drive Drill Presses . . . . . . . . . . . . . . . . . . . . . . . . . . 92

Variable Speed Drill Presses . . . . . . . . . . . . . . . . . . . . . . 94

Geared Head Drill Presses . . . . . . . . . . . . . . . . . . . . . . . . 97

Direct Drive Drill Presses . . . . . . . . . . . . . . . . . . . . . . . . 101

Radial Arm Drill Presses . . . . . . . . . . . . . . . . . . . . . . . . 103

Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106

92

WIL

TO

N D

RIL

LIN

G

DRILLING

93

WIL

TO

N D

RIL

LIN

G

DRILLING

15" AND 20" DRILL PRESSES

• Cast iron head

• Large quill allows greater accuracy

• Head casting features a permanently lubricated ball bearing spindle assembly, using four heavy duty ball bearings mounted in an enclosed quill for extended life

• Massive T-slotted production work table (Model 2550 only)

• Table tilts 45°

• Large ground steel column diameter for maximum head and table support

• 3-3/8" stroke for deep hole applications

• Accurate depth stop for precise hole depths

STANDARD EQUIPMENT

• 5/8" Drill chuck and arbor

15" AND 20" DRILL PRESSES

STOCK NUMBER 2530 2500 2550

Type 15" Bench 15" Floor 20"Floor

Drills to Center of Circle (in.) 15 15 20

Cast Iron Drilling Capacity (max./in.) 5/8 5/8 3/4

Steel Drilling Capacity (max./in.) 1/2 1/2 5/8

Quill Diameter (in.) 1-7/8 1-7/8 2-1/4

Quill Travel (in.) 3-3/8 3-3/8 4-3/4

Spindle Taper 2 MT 2 MT 3 MT

Number & Range of Spindle Speeds (RPM) 12 (250, 340, 390, 510, 600, 650, 990, 1550, 1620, 1900, 2620, 3100)

12 (250, 340, 390, 510, 600, 650, 990, 1550, 1620, 1900, 2620, 3100)

12 (150, 260, 300, 440, 490, 540, 1150, 1550, 1840, 2220, 2950, 4200)

Overall Table Size (in.) 10 x 10 10 x 10 18-1/2 x 16-1/2

Table Working Surface (in.) 10 x 10 10 x 10 14 x 16

T-slot Number & Size (in) N/A N/A 3 & 1/2

Column Diameter (in.) 2-7/8 2-7/8 3-5/8

Base Size (in.) 11 x 18-1/2 11 x 19-1/2 22-3/4 x 17-3/4

Spindle to Base (in.) 24-1/2 48-3/4 43-1/2

Motor 3/4HP, 115V, 1Ph, 1725 RPM 3/4HP, 115V, 1Ph, 1725 RPM 1-1/2HP, 115V, 1Ph, 1725 RPM

Floor Space Required (in./L x W x H) 26 x 13-3/8 x 39 26 x 13-3/8 x 63-1/2 34 x 21 x 67

Net Weight (lbs.) 157 185 321

*Capacities for continuous production use will vary based on application

2530 2500 2550

92

WIL

TO

N D

RIL

LIN

G

DRILLING

93

WIL

TO

N D

RIL

LIN

GDRILLING

15" 6-SPEED DRILL PRESSES

• Constructed to provide a solid base for drilling

• Offers a greater range in spindle speeds than others in this class

• Larger quill provides greater accuracy

• Large production work table give the operator the room to work and support for the job

• 3" Column for head support, while the quill is also supported to lessen deflection

STANDARD EQUIPMENT

• 1/2" Drill Chuck and arbor

15" 6- SPEED DRILL PRESSES

STOCK NUMBER A3816 A3836

Type 15" Floor 15" Bench

Drills to Center of Circle (in.) 15 15

Cast Iron Drilling Capacity (in.) 5/8 5/8

Steel Drilling Capacity (in.) 1/2 1/2

Quill Diameter (in.) 2-1/4 2-1/4

Spindle Travel (in.) 6 6

Number of Spindle Speeds 6 6

Spindle Speeds (RPM) 375, 625, 1125, 1950, 3400, 5000

375, 625, 1125, 1950, 3400, 5000

Table Overall/Table Working Surface (in.)

15-1/4 x 17-3/4/ 12-1/2 x 14-1/2

14-1/4 x 12-3/8 / 10-5/8 x 12-3/8

T-slot Number & Size (in.) 2 & 1/2 2 & 1/2

Spindle to Table (in.) 41

Spindle to Base (in.) 47-1/2 11

Overall Height (in.) 67-1/2 36-1/2

Spindle Taper 2 MT 2MT

Column Diameter (in.) 3 3

Table Capacity (max./lbs.) 100 100

Motor 1HP, 115/230V, 1Ph Prewired 115V

1HP, 115/230V, 1Ph Prewired 115V

Floor Space Required (in./L x W x H) 30 x 20 x 71

Net Weight (lbs.) 394 375

A3816

wiltontool.com

WIL

TO

N D

RIL

LIN

G

94

DRILLING

95

WIL

TO

N D

RIL

LIN

G

DRILLING

15" VARIABLE SPEED DRILL PRESSES

• Speeds from 400 to 5,000 RPM

• Handwheel adjustment sets the speeds

• Large 2-1/4" quill allows greater accuracy

• 3" column diameter for maximum head support

• Full bearing support on quill for maximum spindle stiffness

• 6" stroke for deep hole applications

• Accurate depth stop for precise hole depths

• 1/2" Drill chuck and arbor

• Safety collar


STOCK NUMBER A5816/A5818 A5836/A5838

Type 15" Floor 15" Bench


Cast Iron Drilling Capacity (max./in.) 5/8 5/8

Steel Drilling Capacity (max./in.) 1/2 1/2

Column Diameter (in.) 3 3


Spindle Taper 2 MT 2 MT


Spindle Speeds (RPM) 400 to 5000 400 to 5000

Overall Table Size (in.) 15-1/4 x 17-3/4 14-1/4 x 21

Table Working Surface (in.) 12-1/2 x 14-1/2 10-5/8 x 12-3/8


Spindle to Table (in.) 41

Spindle to Base (in.) 47-1/2 11

Overall Height (in.) 67-1/2 36-1/2

Motor A5816/A5836 1 HP, 115/230V, 1Ph, Prewired 115V

1 HP, 115/230V, 1Ph, Prewired 115V

Motor A5818/A5838 1HP, 230/460V, 3Ph, Prewired 230V

1HP, 230/460V, 3Ph, Prewired 230V



*Capacities for continuous production use will vary based on application

A5816

A5836

wiltontool.com

WIL

TO

N D

RIL

LIN

G

94

DRILLING

95

WIL

TO

N D

RIL

LIN

GDRILLING


• Variable spindle speeds from 300 to 2000 RPM

• External #3 Morse Taper

• Front mounted positive control depth stop

• 6" quill travel

• Massive 3" quill diameter

• Heavy duty cast iron design

• Large precision ground T-slot production table for easy set ups

• Front or side rack and worm gear table raiser

• Table rotates 360° around the column

• Machined T-slotted base

• Head is massively constructed for more accuracy and rigidity

OPTIONAL EQUIPMENT STOCK NUMBER

Coolant system, 1/8HP pump, 115/220V, 1Ph 5512104

Coolant system, 1/8HP pump, 220/440V, 3Ph 5508071

Jacob's chuck, 3/16"–3/4", keyed with #3 arbor 5108010


STOCK NUMBER 2221VS 2223VS


Cast Iron Drilling Capacity (in.) 1-1/4 1-1/4

Steel Drilling Capacity (in.) 1 1

Column Diameter (in.) 4-1/2 4-1/2

Range of Spindle Speeds (RPM) 300 to 2000 300 to 2000

Distance Spindle to Column (max./in.) 10-7/16 10-7/16

Distance Spindle to Table (in.) 32-3/8 32-3/8



Quill Diameter (in.) 3 3

Table Size (in.) 18-1/8 x 14-3/4 18-1/8 x 14-3/4


Table Travel (in.) 32-3/8 32-3/8

Base Working Surface (in.) 15-1/4 x 12-1/16 15-1/4 x 12-1/16

Base Slots Number & Size (in.) 2 & 5/8 2 & 5/8

Motor for 2221VS 2HP, 115/230V, 1Ph, Prewired 115V

2HP, 230/460V, 3Ph, Prewired 230V

Floor Space Required (in./L x W x H) 34-1/4 x 27 x 77-1/4 34-1/4 x 27 x 77-1/4


* Capacities for continuous production use will vary based on application

wiltontool.com

WIL

TO

N D

RIL

LIN

G

96

DRILLING

97

WIL

TO

N D

RIL

LIN

G

DRILLING

STOCK NUMBER 2232AC 2234AC


Cast Iron Drilling Capacity (in.) 1-1/2 1-1/2

Steel Drilling Capacity (in.) 1-3/8 1-3/8

Quill Diameter (in.) 3 3

Distance Spindle to Column (in.) 10-7/16 10-7/16

Distance Spindle to Table (max./in.) 32-3/8 32-3/8

Spindle Speeds (RPM) 65 to 2000 65 to 2000



Quill Travel (in.) 6 6


Table Working Surface (in.) 18-1/8 x 14-3/4 18-1/8 x 14-3/4


Table Travel (in.) 32-3/8 32-3/8

Table Overall Size (in.) 22 x 18-3/4 22 x 18-3/4

Base Working Surface (in.) 15-1/4 x 12-1/16 15-1/4 x 12-1/16

Base Slots Number & Size (in.) 2 & 5/8 2 & 5/8

Overall Base Size (in.) 27-2/4 x 20 27-2/4 x 20

Motor 2HP, 230V, 3Ph 2HP, 460V, 3Ph

Floor Space Required (in./L x W x H) 37 x 27 x 82-1/4 37 x 27 x 82-1/4



Coolant system, 1/8HP pump, 220V/440V, 3Ph 5508071

Coolant system, 1/8HP pump, 115V/220V, 1Ph 5512104

Jacob's chuck, 3/16"–3/4", keyed with #3 arbor 5108010

ELECTRONIC VARIABLE SPEED DRILL PRESSES

• Variable spindle speeds from 65 to 2000 RPM

• #3 Morse taper spindle

• Latest AC inverter variable speed technology

• High torque at all speeds both forward and reverse

• Continuous speed adjustment while in operation

• Front mounted LED spindle RPM readout

• Forward and reverse for tapping

• Emergency stop

• Front mounted positive control depth stop

• Large precision ground T-slot production table for easy set ups

• Head is massively constructed for more accuracy and rigidity

ELECTRONIC VARIABLE SPEED DRILL PRESSES

wiltontool.com

WIL

TO

N D

RIL

LIN

G

96

DRILLING

97

WIL

TO

N D

RIL

LIN

GDRILLING


Keyless drill chuck and arbor KDC130-MT3

Jacobs drill chuck, key and arbor 5108010

Foot operated start/stop switch 5245631A

Flanged Quill 2G08459

5-speed forward/reverse switch* 1820061

Foot reversing switch* 5245631

* 3 phase machines only

20" WILTON/ARBOGA GEAR HEAD DRILL PRESSES

• Helical gears for smooth, quiet operation

• Quick release drill ejector

• Safety latch to prevent head dropping when unclamped

• Eight spindle speeds

• T-Slotted table with coolant trough

• Head and table rotate 360° around column

• 2 position, High/Low switch

• 3-15/16" Column diameter

• English/Metric depth gauge


STOCK NUMBERA2608-1/ A2608-2/

A2608-4A2608M-PF2/A2608M-PF4


Drilling Capacity Mild Steel (in.) 1-1/4 1-1/4

Tapping Capacity Mild Steel (in.) 1/2 1/2


Distance Spindle to Table (max./in.) 35-5/8 35-5/8

Spindle Taper 3 MT 3MT

Spindle Speeds (RPM) 8 (130, 260, 420, 840, 535,1070, 1745, 3480)

8 (130, 260, 420, 840, 535,1070, 1745, 3480)

Quill Feed Manual Power Feed

Quill Feed Rates (IPR) N/A (.004, .006, .009, .012)

Quill Travel (in.) 5-1/8 5-1/8


Vertical Movement of Drill Head 8-5/8 8-5/8

Table Size (in.) 15-3/4 x 19-3/4 15-3/4 x 19-3/4

T-slot Number & Size (in) 2 & 9/16 2 & 9/16

Table Weight Capacity (lbs.) 350 350

Vertical Movement of Table (in.) 24-1/2 24-1/2

Motor for A2608-1 (2 speed) 3/4 to 1HP, 115V, 1Ph

Motor for A2608-2 (2 speed) 1 to 1-1/2HP, 220V, 3Ph 1 to 1-1/2HP, 220V, 3Ph

Motor for A2608-4 (2 speed) 1 to 1-1/2HP, 440/460V, 3Ph 1 to 1-1/2HP, 440/460V, 3Ph

Floor Space Required (in./L x W x H) 24 x 22 x 72 24 x 22 x 72


A2608M-PF2

wiltontool.com

WIL

TO

N D

RIL

LIN

G

98

DRILLING

99

WIL

TO

N D

RIL

LIN

G

DRILLING

STOCK NUMBER A3808M-PF2 A3808M-PF4





Range of Spindle Speeds (RPM) 8(90, 190, 320, 640, 530, 1060, 1790, 3610)

8(90, 190, 320, 640, 530, 1060, 1790, 3610)

Spindle Taper 4MT 4MT

Quill Feed Power Feed Power Feed

Distance Spindle to Table (max./in.) 32 32

Quill Feed Rates (IPR) 4 (.004, .006, .009, .012) 4 (.004, .006, .009, .012)

Quill Travel (in.) 5-1/8 5-1/8


Vertical Movement of Drill Head (in.) 9 9

Table Size (in.) 15-3/4 x 19-1/2 15-3/4 x 19-1/2



Vertical Movement of Table (in.) 24-1/2 24-1/2

Motor 2-1/4 to 3HP, 220V, 3Ph, 2-Speed 2-1/4 to 3HP, 460V, 3Ph







• T-Slotted table and base with coolant trough

• Automatic feed control buttons located on feed levers

• Electro-magnetic clutch power feed


• No-volt release prevents spindle start when power returns after shut down


Automatic spindle reverse 1T05030

Foot reversing switch 5245631



wiltontool.com

WIL

TO

N D

RIL

LIN

G

98

DRILLING

99

WIL

TO

N D

RIL

LIN

GDRILLING





• Machined, T-Slotted base plate



• Fully enclosed spindle


Flanged Quill 1T08019

Automatick spindle reverse 1T05030




MODEL NUMBER A3008-2/ A3008-4A3008M-PF2/ A3008M-PF4





Spindle Taper 3MT 3MT

Range of Spindle Speeds (RPM) 8(90, 190, 320, 530 ,640, 1060, 1790, 3610)

8 (90, 190, 320, 530,640, 1060, 1790, 3610)



Quill Feed Rates (IPR) 4 (.004, .006, .009, .012)



Vertical Movement of Drill Head (in.) 9 9

Table Size (in.) 15-3/4 x 19-3/4 15-3/4 x 19-3/4



Vertical Movement of Table 30 30

Motor for A3008-2/ A3008M-FP2 (2 speed) 1-1/2 to 2HP, 220V, 3Ph 1-1/2 to 2HP, 220V, 3Ph

Motor for A3008-4/ A3008M-FP4 (2 speed) 1-1/2 to 2HP, 440/460V, 3Ph 1-1/2 to 2HP, 440/460V, 3Ph



A3008M-PF2

wiltontool.com

WIL

TO

N D

RIL

LIN

G

100

DRILLING

101

WIL

TO

N D

RIL

LIN

G





• Machined, T-Slotted base plate



• Fully enclosed spindle

• Large T-Slotted Table

STOCK NUMBER A4008-2 / A4008-4A4008M-PF2/ A4008M-PF4



Tapping Capacity Mild Steel (in.) 1 1


Range of Spindle Speeds (RPM) 8 (108, 162, 240, 360,528, 805, 1175, 1800)

8 (105, 162, 240, 360,528, 805, 1175, 1800)



Quill Feed Rates (IPR) 4 (.004, .006, .009, .013 )




Table Size (in.) 20 x 24 20 x 24


Vertical Movement of Table (in.) 25 25

Motor for A4008-2/ A4008M-PF2 3HP, 220V, 3Ph 3HP, 220V, 3Ph

Motor for A4008-4/A4008M-PF4 3HP, 440/460V, 3Ph 3HP, 440/460V, 3Ph





Automatic spindle reverse 1T05030


Flanged Quill 2GO8599


A4008-2

wiltontool.com

WIL

TO

N D

RIL

LIN

G

100

DRILLING

101

WIL

TO

N D

RIL

LIN

G

STOCK NUMBER 2350 2360 2380

Drills to Center of Circle (in.) 28 30 33

Cast Iron Drilling Capacity (in.) 1-7/8 2-5/32 2-7/8

Steel Drilling Capacity (in.) 1-3/4 2 2-3/4

Cast Iron Tapping Capacity (in.) 1-3/4 2 2-3/8

Steel Tapping Capacity (in.) 1-9/16 1-3/4 2-1/8

Quill Diameter (in.) 3.228 3.465 3.78

Distance Spindle to Column (max./in.) 14 15 16-1/2

Number & Range of Spindle Speeds (RPM) 9 (82, 120, 180, 240, 354, 528, 678, 1026, 1524)

9 (55, 98, 156, 198, 346, 456, 576, 822, 1338)

12 (42, 58, 86, 116, 154, 249, 304, 412, 554, 748, 1098, 1458)

Automatic Feeds (in.) .004, .008, .012, .016 .003, .006, .010, .014 .002, .004, .006, .008, .014, .020

Spindle Travel (in.) 9 10 11

Spindle Distance to Base (in.) 49 50 51

Spindle Distance to Table (min./in.) 2.67 2-3/4 2-3/4

Spindle Distance to Table (max./in.) 30-1/2 30-1/2 30-1/2

Table Size (in.) 22 x 19 22 x 19 23-1/2 x 23-1/2

T-Slot Size (in.) 1/2 5/8 5/8

Work Table Capacity (lbs) 400 400 400

Spindle Taper 4MT 4MT 5MT

Base Slots Size (in.) 5/8 5/8 5/8

Motor 3HP, 230/460V, 3PhPrewired 230V

4HP, 230/460V, 3PhPrewired 230V

7-1/2HP, 230/460V, 3PhPrewired 230V

Floor Space Required (in./ L x W x H) 40 x 30 x 95 53 x 30 x 108 55 x 33 x 110

Net Weight (lbs) 1840 2405 3065

DIRECT DRIVE ROUND COLUMN DRILL PRESSES WITH MECHANICAL CLUTCH

• Two speed forward and reverse switch

• Mechanical Powerfeed clutch engagement

• Heavy duty quill and spindle

• Tempered, ground spindle with internal taper mounted in precision bearings for maximum accuracy, minimizing defl ection

• Speed and feed selectors are located on one side of the drill head for convenience and ease of operation

• Oversized base is precision ground with T-slots for added versatility and stability

• Spindle gear box is equipped with steel hardened, ground, shafts and gears

• Spindle gear box is internally lubricated in a continuous oil bath for long term smooth operation

• Tilting table, 45° left and right

• Powerfeed can be disengaged manually

STANDARD EQUIPMENT

• Automatic tool ejector

• Manual quill lock

• Coolant system

• Low voltage at switch

DIRECT DRIVE ROUND COLUMN DRILL PRESSESDRILLING

2360

wiltontool.com

WIL

TO

N D

RIL

LIN

G

102

DRILLING

wiltontool.com

DRILLING

103

WIL

TO

N D

RIL

LIN

G

DIRECT DRIVE ROUND COLUMN DRILL PRESSES

DIRECT DRIVE ROUND COLUMN WITH ELECTRO-MAGNETIC CLUTCH DRILL PRESSES

• Push button control panel

• Power feed gear box fitted with an electro-magnetic clutch for power feed engagement and overload protection

• Heavy duty quill and spindle with manual quill locking

• Tempered, ground spindle with internal taper mounted in precision bearings for maximum accuracy, minimizing deflection

• Speed and feed selectors are located on one side of the drill head for convenience and ease of operation

• Oversized base is precision ground with T-slots for added versatility and stability

• Coolant tank and pump integrated into base

• Spindle gear box is equipped with steel hardened, ground, shafts and gears

• Spindle gear box is internally lubricated in a continuous oil bath for long term smooth operation

STANDARD EQUIPMENT


• Manual quill lock

• Coolant system

• Low voltage at switch

STOCK NUMBER 2401/2402* 2404* 2444/2445* 2455/2456* 2475/2476*

Drills to Center of Circle (in.) 28 28 30 33 33

Steel Drilling Capacity (in.) 1-3/8 1-3/4 2 2-3/8 2-3/4

Steel Tapping Capacity (in.) 1-1/2 1-9/16 1-3/4 2 2-1/8

Quill Diameter (in.) 3.228 3.228 3.465 3.465 3.78

Distance Spindle to Column (max./in.) 14 14 15 16-1/2 16-1/2

Number & Range of Spindle Speeds (RPM) 8(112, 160, 245, 358, 532, 762, 1164)

9 (82, 120, 180, 354, 528, 678, 1026, 1524)

9 (55, 98, 156, 198, 346, 456, 576, 822, 1338)

12 (48, 72, 96, 144, 186, 234, 288, 360, 480, 804, 996, 1278)

12 (42, 58, 86, 116, 154, 249, 304, 412, 554, 748, 1098,

1485)

Automatic Feeds (in.) 3 (.004, .007, .010) 4 (.004, .008, .012, .016) 4 (.003, .006, .010, .014) 6 (.002, .004, .006, .008, .014, .020)

6 (.002, .004, .006, .008, .014, .020)

Spindle Travel (in.) 7 9 10 10 11

Spindle Distance to Base (in.) 48 49 50 51 51

Spindle Distance to Table (min./in.) 1.37 2.67 2.75 2.95 2.75

Spindle Distance to Table (max./in.) 30-1/2 30-1/2 30-1/2 30-1/2 30-1/2

Table Size (in.) 22 x 19 22 x 19 33-1/2 x 23-1/2 33-1/2 x 23-1/2 33-1/2 x 23-1/2

T-slot Number & Size (in.) 3 & 1/2 3 & 1/2 3 & 5/8 3 & 5/8 3 & 5/8

Work Table Capacity (lbs.) 575 575 575 750 750

Spindle Taper 4MT 4MT 4MT 5MT 5MT

Motor 2HP, 230/460V, 3PhPrewired 230V





Floor Space Required (in./ L x W x H) 50 x 27 x 98 50 x 27 x 98 53 x 30 x 108 53 x 33 x 109 55 x 33 x 115

Net Weight (lbs.) 1632 1632 2405 2800 2536

* Equipped with Automatic Tapping Control

2455

wiltontool.com

WIL

TO

N D

RIL

LIN

G

102

DRILLING

wiltontool.com

DRILLING

103

WIL

TO

N D

RIL

LIN

G

3' ARM RADIAL DRILL PRESSES

• The power train gears and spline shafts are made of the finest quality, heat treated and ground nickel chrome steel–giving extra strength and smoothness to high torque loads

• The spindle is made of the finest case hardened steel, for extra strength and wear

• The spindle is supported by double row taper roller and thrust ball bearings at the nose, with thrust and radial axis bearings at the top

• Built to withstand exceptionally heavy drilling and boring loads and to insure maximum accuracy

• Arm raising safety device prevents arm from dropping

• Counter balanced mechanism for spindle return

• 6 speeds/3 feed rates make exotic materials easier to drill, bore and tap

• Centralized control center


• Independent arm electric clamping system, which locks and unlocks the head and column

• Push button controls are all reduced to 110V

• Electrical circuits are located in the built-in control box at the rear of the arm--this keeps the controls dust-and-humidity-free while making them easily accessible for maintenance

• Entire frame is made of Meehanite and high tensile strength cast iron to handle the heaviest of jobs

STANDARD EQUIPMENT

• Built-in work light

• Coolant pump

• Tool kit

• Box table

3' ARM RADIAL DRILL PRESS

STOCK NUMBER 720R

Steel Drilling Capacity (in.) 1-1/2

Cast Iron Drilling Capacity (in.) 2

Steel Tapping Capacity (in.) 3/4

Cast Iron Tapping Capacity (in.) 1

Steel Boring Capacity (in.) 2-3/4

Cast Iron Boring Capacity (in.) 4

Column Diameter (in.) 8-1/4

Distance from Column to Spindle (max./in.) 29-1/2

Distance from column to spindle center, Min. (in.) 8-5/8

Travel of head (Horizontal) (in.) 20-7/8

Distance from base to spindle end, Max. (in.) 41-3/4

Distance from base to spindle end, Min. (in.) 9-5/8

Travel of arm (Vertical) (in.) 23-13/16

Table Size (in.) 23-5/8 x 17-1/2 x 15

T-slot Number & Size (in) 3 & 3/4

Base Dimensions (in.) 49-5/8 x 25-3/16 x 6-9/32

Spindle Taper 4 MT

Spindle Stroke (in.) 8-1/4

Range of Spindle Speeds (RPM) 6 (88–1500)

Feed Rates (IPR) .002, .004, .006

Motor 3HP, 230/460V, 3Ph, Prewired 230V

Elevating Motor 1HP

Coolant Pump Motor 1/8HP

Machine Height from Floor (max./in.) 85-7/16


Shipping Weight (lbs.) 2970

104

WIL

TO

N D

RIL

LIN

G

DRILLING

wiltontool.com

DRILLING

105

5' ARM RADIAL DRILL PRESS

WIL

TO

N D

RIL

LIN

GSTOCK NUMBER 1100R 1100R-4 1230R 1230R-4

Steel Drilling Capacity (in.) 1-3/4 1-3/4 1-7/8 1-7/8

Cast Iron Drilling Capacity (in.) 2-1/4 2-1/4 2-5/16 2-5/16

Steel Tapping Capacity (in.) 1 1 1 1

Cast Iron Tapping Capacity (in.) 1-1/4 1-1/4 1-1/2 1-1/2

Steel Boring Capacity (in.) 3-3/8 3-3/8 3-3/8 3-3/8

Cast Iron Boring Capacity (in.) 4-3/4 4-3/4 4-3/4 4-3/4

Column Diameter (in.) 10-1/4 10-1/4 11-13/16 11-13/16

Distance from Column to Spindle (max./in.) 43-5/16 43-5/16 46 46

Distance from Column to Spindle (min./in.) 9-5/8 9-5/8 13-3/4 13-3/4

Travel of head (Horizontal) (in.) 33-5/8 33-3/8 35 35

Distance Base to Spindle (max./in.) 50-3/8 50-3/8 54 54

Distance Base to Spindle (min./in.) 12-5/8 12-5/8 19-3/8 19-3/8

Travel of arm (Vertical/in.) 24 24 34-5/8 34-5/8

Table Dimensions (in.) 24-3/4 x 20-1/2 x 16-1/2 24-3/4 x 20-1/2 x 16-1/2 27-7/8 x 20-1/2 x 16-1/2 27-7/8 x 20-1/2 x 16-1/2

T-slot Number & Size (in.) 3 & 3/4 3 & 3/4 3 & 3/4 3 & 3/4

Base Dimensions (in.) 67-3/4 x 28 x 6-1/2 67-3/4 x 28 x 6-1/2 67-3/4 x 28 x 6-1/2 67-3/4 x 28 x 6-1/2

Spindle Taper 4 MT 4MT 4 MT 4 MT

Quill Travel (in.) 9 9 9-7/8 9-7/8

Spindle Travel w/Power Feed Engaged (in.) 4 4 4 4

Spindle Speeds (RPM) 12 (44–1500) 12 (44–1500) 12 (45–1550) 12 (45–1550)

Feed Rates (IPR) 3 (.002, .004, .006) 3 (.002, .004, .006) 3 (.002, .004, .006) 3 (.002, .004, .006)

Motor (2-Speed) (Low & High) 1-1/2 to 3HP, 230V, 3Ph 1-1/2 to 3HP, 460V, 3Ph 2-1/2 to 5HP, 230V, 3Ph 2-1/2 to 5HP, 460V, 3Ph

Elevating Motor 1HP 1HP 1HP 1HP

Coolant Pump Motor 1/8HP 1/8HP 1/8HP 1/8HP

Machine Height from Floor (in.) 100 100 109-1/2 109-1/2

Floor Space Required(in./L x W x H) 74 x 34 x 89 74 x 34 x 39 80 x 39 x 89 80 x 39 x 89

Shipping Weight (lbs.) 4290 4290 4620 4620


• Power train gears and spline shafts are made of the finest quality, heat treated and ground nickel chrome steel–giving extra strength and smoothness to high torque loads



• The spindle is built to withstand exceptionally heavy drilling and boring loads and to insure maximum accuracy


• Electrical circuits are located in the built-in control box at the rear of the arm–this keeps the controls dust and humidity free while making them easily accessible for maintenance







• Independent manual arm clamping system, which locks and unlocks the head and column

STANDARD EQUIPMENT


• Coolant pump

• Tool kit

• Box table


1230R

104

WIL

TO

N D

RIL

LIN

G

DRILLING

wiltontool.com

DRILLING

105

5' ARM RADIAL DRILL PRESSW

ILT

ON

DR

ILL

ING


• The power train gears and spline shafts are made of the finest quality, heat treated and ground nickel chrome steel–giving extra strength and smoothness to high torque loads



• The spindle is built to withstand exceptionally heavy drilling and boring loads and to insure maximum accuracy


• Electrical circuits are located in the built-in control box at the rear of the arm–this keeps the controls dust-and-humidity-free while making them easily accessible for maintenance







• Hydraulic head and column clamping

STANDARD EQUIPMENT


• Coolant pump

• Tool kit

• Box table

STOCK NUMBER 1600R

Drilling Capacity (in.) 2-1/2

Cast Iron Drilling Capacity (in.) 2-7/8

Steel Tapping Capacity (in.) 2

Cast Iron Tapping Capacity (in.) 2-3/8

Steel Boring Capacity (in.) 5

Cast Iron Boring Capacity (in.) 7-3/8

Column Diameter (in.) 17

Distance from Column to Spindle (max./in.) 63

Distance from Column to Spindle (min./in.) 17

Travel of head (Horizontal) (in.) 49-5/8

Distance Base to Spindle (max./in.) 63

Distance Base to Spindle (min./in.) 13

Travel of arm (Vertical/in.) 50

Table Dimensions (in.) 27-7/8 x 19-5/8 x 15-3/4

T-slot Number & Size (in.) 3 & 7/8

Base Dimensions (in.) 97-5/8 x 41-11/32 x 8-1/4

Spindle Taper 5 MT

Quill Travel (in.) 14-9/16

Spindle Travel w/Power Feed Engaged (in.) 13

Range of Spindle Speeds (RPM) 12 (40–1920)

Feed Rates (IPR) 6 (.003–.038 IPR)

Motor 7-1/2HP, 230/460V, 3Ph, Prewired 230V

Elevating Motor 2HP

Clamping Motor 1HP

Coolant Pump Motor 1/2HP

Machine Height from Floor (in.) 124-58/64

Floor Space Required(in./L x W x H) 116 x 55 x 112

Shipping Weight (lbs.) 11,220

wiltontool.com

WIL

TO

N D

RIL

LIN

G

106

DRILLING

107

WIL

TO

N D

RIL

LIN

G

DRILLING

CAM ACTION DRILL PRESS VISES

• Simple push or pull on the center bar knob sets the jaw in position

• Easy press locking lever cams the jaw ahead 3/32", exerting a holding pressure that is adjustable from 400 to 1100 lbs.

• Base is designed for clear through drilling applications

• Unique top locking lever can be raised or lowered to tighten or loosen against the workpiece

SUPER PRECISION DRILL PRESS VISES

• Rugged design makes these vises perfect for even the most diffi cult of drilling, tapping and reaming operations

• Body made from close grain aged cast iron

• Ground vise bed for smooth and consistent jaw movement

• Jaws are hardened and grounded, with cross patterned 90° V-grooves in the stationary jaw facilitating holding of round pieces both horizontally and vertically

• Hardness of jaws-55+3HRC

VERSATILE DRILL PRESS VISES

• Made from high grade cast iron

• Ground vise bed for smooth, consistent jaw movement

• Hardened top V-groove jaws

• Rugged design and large workload capacity

STANDARD & ANGLE DRILL PRESS VISES

• Precision grinding of sides and front side face permits additional mounting positions for drilling, tapping or reaming

• Combining a smooth moveable jaw plate with a cross-patterned 90° V-groove stationary jaw

• The vise is recommended for general use

DRILL PRESS VISES

STOCK NUMBER

MODEL NUMBER JAW WIDTH (IN.) JAW OPENING

(IN.)JAW DEPTH

(IN.)SHIP WEIGHT

(LBS.)

13400 1203 3 3 1-1/4 10

13401 1204 4 4-11/16 1-5/16 18

13402 1206 6 6-3/16 1-13/16 34

13403 1208 8 8-3/16 2 51

STOCK NUMBER

MODEL NUMBER

JAW WIDTH (IN.)

JAW OPENING (IN.) JAW DEPTH (IN.) SHIP WEIGHT

(LBS.)

11718 DPV/80 3-3/16 3-1/2 1 13

11719 DPV/100 4 4 1-1/4 20

STOCK NUMBER MODEL NUMBER JAW WIDTH

(IN.)JAW OPENING

(IN.) JAW DEPTH (IN.) SHIP WEIGHT (LBS.)

Continuous Nut

63238 1335 3 2-3/4 1-7/8 6

63239 1345 4 4 2-1/8 12

63240 1360 5 5 2-1/8 24

Rapid Acting Nut

63241 1435 3-1/2 4-1/4 1-3/4 11

63242 1445 4-1/2 4-3/4 1-7/8 15

63243 1460 6 6-3/4 2-1/8 28

STOCK NUMBER MODEL NUMBER JAW WIDTH

(IN.) JAW OPENING (IN.) JAW DEPTH (IN.)

SHIP WEIGHT (LBS.)

Standard Models

12800 25 2-1/2 2-9/16 1-1/2 6

12860 30 3 3-1/8 1-3/4 10

Angle Models

12850 25A 2-1/2 2-1/2 1-1/2 12

12870 30A 3-1/8 3-1/8 1-3/4 17

wiltontool.com

WIL

TO

N D

RIL

LIN

G

106

DRILLING

107

WIL

TO

N D

RIL

LIN

GDRILLING

KEYLESS DRILL CHUCKS WITH INTEGRAL SHANK

• Integral shank design eliminates the possiblilty of the chuck slipping on its arbor

• It is ideal for all your drill press and machining center operations

• All parts are precision ground, heat treated and balanced with each one being precision tested to .0019" T.I.R.

STOCK NUMBER CAPACITY (IN.) MALE TAPER WEIGHT (LBS.)

KDC80-MT2 0–5/16 MT-2 1-1/2

KDC130-MT3 0–1/2 MT-3 2-1/2

KDC130-MT4 0–1/2 MT-4 2-3/4

KDC160-MT3 1/8–5/8 MT-3 3-1/2

KDC160-MT4 1/8–5/8 MT-4 4

PRECISION KEYLESS DRILL CHUCKS-TAPPER MOUNTED

• These chucks incorporate a unique self-tightening feature, whick allows them to grip the cutting tool tighter as more torque is applied

• Even when high torque is applied, the chucks can be easily opened by hand

• Extremely high accurachy and precision design make these chucks suitable for use on machining centers, CNC machines and conventional equuipment

• All parts are precision ground, heat treated and balanced with each chuck being precision tested to .0019" T.I.R.

STOCK NUMBER CAPACITY (IN.) TAPER MOUNT WEIGHT (LBS.)

KDC100-JT2 0–3/8 JT2 1-1/2

KDC100-JT33 0–3/8 JT33 1-1/2

KDC130-JT33 0–1/2 JT33 2

KDC130-JT6 0–1/2 JT6 2

KDC160-JT6 1/8–5/8 JT6 2-1/2

KDC160-JT3 1/8–5/8 JT3 2-1/2

STOCK NUMBER CHUCK TAPER SHANK TAPER WEIGHT (OZ.)

DCA2-JT2 JT2 MT-2 5

DCA2-JT33 JT33 MT-2 5

DCA2-JT6 JT6 MT-2 5

DCA2-JT3 JT3 MT-2 7






ARBORS

• Precision CNC machined and ground arbors provide high accuracy and close tolerance fits

• For best accuracy and fit we recommend mounting Wilton keyless drill chucks on Wilton arbors

DRILLING ACCESSORIES

wiltontool.com

WIL

TO

N D

RIL

LIN

G

108

DRILLING

STOCK NUMBER TAPPING CAPACITY HEAD WEIGHT PACKAGE WEIGHT

WTH25 5/64–1/4 2-1/2 5

WTH50 3/16–7/16 5-1/4 9-3/4

WTH75 5/16–3/4 10 16-1/4

STOCK NUMBER 5104561 5107901

Working Surface (in.) 22-9/16 x 9-7/16 17-23/32 x 9-7/16

Longitudinal Feed (in.) 14-49/64 14-49/64

Crossfeed (in.) 6-1/8 6-1/8

Length of Bedplate (in.) 10-13/64 10-13/64

Width of Bedplate (in.) 9 -7/32 9-7/32

Total Height (in.) 4-1/2 4-1/2


REVERSIBLE TAPPING HEADS

• Pre-selective torque drive prevents tap breakage

• 1.75: 1 reverse ratio increases productivity

• Self-feed ensures gauge perfect threads

• Re-entry cushion eliminates cross threading

• Right hand tapping only

STANDARD EQUIPMENT

• Tap holder

• Two morse taper arbors

• Two keys

• Brake rod

• Hex wrench

• Packaged in wooden box with latch

STOCK NUMBER DESCRIPTION

5107980 Adapter plate with stud

MILLING TABLES

• Highest quality meehanite castings

• Table and ways precision ground

• Adjustable keys and locks for added rigidity

• Leadscrews supported by axial ball bearings

• Table accuracy on horizontal plane within 0.001"

• Leadscrew accuracy 0.0005"

• 3 T-Slots

ADAPTER PLATE WITH STUD

For use with all WILTON/ARBOGA Gear Head Drill Presses. Fits directly onto the standard table knee. Will not fit ARBOGA Model A4008.

ADAPTER PLATE WITH STUD

Can be used on all WILTONdrill presses with 18" x 25" tables. These adapter plates bolt directly onto Wilton's standard T-slot production table.

STOCK NUMBER DESCRIPTION

5046110 Box Plate Adapter

DRILLING ACCESSORIES

wilton drilling jet drilling - :: cecuamaqcecuamaq.com/pdf/wilton taladros pedestal.pdf · 92...

Documents